2 * sh.c -- a prototype Bourne shell grammar parser
3 * Intended to follow the original Thompson and Ritchie
4 * "small and simple is beautiful" philosophy, which
5 * incidentally is a good match to today's BusyBox.
7 * Copyright (C) 2000,2001 Larry Doolittle <larry@doolittle.boa.org>
10 * The parser routines proper are all original material, first
11 * written Dec 2000 and Jan 2001 by Larry Doolittle.
12 * The execution engine, the builtins, and much of the underlying
13 * support has been adapted from busybox-0.49pre's lash,
14 * which is Copyright (C) 2000 by Lineo, Inc., and
15 * written by Erik Andersen <andersen@lineo.com>, <andersee@debian.org>.
16 * That, in turn, is based in part on ladsh.c, by Michael K. Johnson and
17 * Erik W. Troan, which they placed in the public domain. I don't know
18 * how much of the Johnson/Troan code has survived the repeated rewrites.
20 * b_addchr() derived from similar w_addchar function in glibc-2.2
21 * setup_redirect(), redirect_opt_num(), and big chunks of main()
22 * and many builtins derived from contributions by Erik Andersen
23 * miscellaneous bugfixes from Matt Kraai
25 * There are two big (and related) architecture differences between
26 * this parser and the lash parser. One is that this version is
27 * actually designed from the ground up to understand nearly all
28 * of the Bourne grammar. The second, consequential change is that
29 * the parser and input reader have been turned inside out. Now,
30 * the parser is in control, and asks for input as needed. The old
31 * way had the input reader in control, and it asked for parsing to
32 * take place as needed. The new way makes it much easier to properly
33 * handle the recursion implicit in the various substitutions, especially
34 * across continuation lines.
36 * Bash grammar not implemented: (how many of these were in original sh?)
37 * $@ (those sure look like weird quoting rules)
39 * ! negation operator for pipes
40 * &> and >& redirection of stdout+stderr
43 * fancy forms of Parameter Expansion
45 * Arithmetic Expansion
46 * <(list) and >(list) Process Substitution
47 * reserved words: case, esac, select, function
48 * Here Documents ( << word )
51 * job handling woefully incomplete and buggy
52 * reserved word execution woefully incomplete and buggy
54 * port selected bugfixes from post-0.49 busybox lash - done?
55 * finish implementing reserved words: for, while, until, do, done
56 * change { and } from special chars to reserved words
57 * builtins: break, continue, eval, return, set, trap, ulimit
59 * handle children going into background
60 * clean up recognition of null pipes
61 * check setting of global_argc and global_argv
62 * control-C handling, probably with longjmp
63 * follow IFS rules more precisely, including update semantics
64 * figure out what to do with backslash-newline
65 * explain why we use signal instead of sigaction
66 * propagate syntax errors, die on resource errors?
67 * continuation lines, both explicit and implicit - done?
68 * memory leak finding and plugging - done?
69 * more testing, especially quoting rules and redirection
70 * document how quoting rules not precisely followed for variable assignments
71 * maybe change map[] to use 2-bit entries
72 * (eventually) remove all the printf's
74 * SPDX-License-Identifier: GPL-2.0+
79 #include <malloc.h> /* malloc, free, realloc*/
80 #include <linux/ctype.h> /* isalpha, isdigit */
81 #include <common.h> /* readline */
82 #include <bootretry.h>
85 #include <command.h> /* find_cmd */
86 #ifndef CONFIG_SYS_PROMPT_HUSH_PS2
87 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
91 #include <ctype.h> /* isalpha, isdigit */
92 #include <unistd.h> /* getpid */
93 #include <stdlib.h> /* getenv, atoi */
94 #include <string.h> /* strchr */
95 #include <stdio.h> /* popen etc. */
96 #include <glob.h> /* glob, of course */
97 #include <stdarg.h> /* va_list */
100 #include <getopt.h> /* should be pretty obvious */
102 #include <sys/stat.h> /* ulimit */
103 #include <sys/types.h>
104 #include <sys/wait.h>
107 /* #include <dmalloc.h> */
113 #define applet_name "hush"
114 #include "standalone.h"
115 #define hush_main main
116 #undef CONFIG_FEATURE_SH_FANCY_PROMPT
120 #define SPECIAL_VAR_SYMBOL 03
121 #define SUBSTED_VAR_SYMBOL 04
123 #define FLAG_EXIT_FROM_LOOP 1
124 #define FLAG_PARSE_SEMICOLON (1 << 1) /* symbol ';' is special for parser */
125 #define FLAG_REPARSING (1 << 2) /* >= 2nd pass */
130 DECLARE_GLOBAL_DATA_PTR
;
132 #define EXIT_SUCCESS 0
134 #define syntax() syntax_err()
135 #define xstrdup strdup
136 #define error_msg printf
140 REDIRECT_OVERWRITE
= 2,
146 /* The descrip member of this structure is only used to make debugging
148 struct {int mode
; int default_fd
; char *descrip
;} redir_table
[] = {
150 { O_RDONLY
, 0, "<" },
151 { O_CREAT
|O_TRUNC
|O_WRONLY
, 1, ">" },
152 { O_CREAT
|O_APPEND
|O_WRONLY
, 1, ">>" },
153 { O_RDONLY
, -1, "<<" },
165 /* might eventually control execution */
182 #define FLAG_END (1<<RES_NONE)
183 #define FLAG_IF (1<<RES_IF)
184 #define FLAG_THEN (1<<RES_THEN)
185 #define FLAG_ELIF (1<<RES_ELIF)
186 #define FLAG_ELSE (1<<RES_ELSE)
187 #define FLAG_FI (1<<RES_FI)
188 #define FLAG_FOR (1<<RES_FOR)
189 #define FLAG_WHILE (1<<RES_WHILE)
190 #define FLAG_UNTIL (1<<RES_UNTIL)
191 #define FLAG_DO (1<<RES_DO)
192 #define FLAG_DONE (1<<RES_DONE)
193 #define FLAG_IN (1<<RES_IN)
194 #define FLAG_START (1<<RES_XXXX)
196 /* This holds pointers to the various results of parsing */
198 struct child_prog
*child
;
199 struct pipe
*list_head
;
202 struct redir_struct
*pending_redirect
;
205 int old_flag
; /* for figuring out valid reserved words */
206 struct p_context
*stack
;
207 int type
; /* define type of parser : ";$" common or special symbol */
208 /* How about quoting status? */
212 struct redir_struct
{
213 redir_type type
; /* type of redirection */
214 int fd
; /* file descriptor being redirected */
215 int dup
; /* -1, or file descriptor being duplicated */
216 struct redir_struct
*next
; /* pointer to the next redirect in the list */
217 glob_t word
; /* *word.gl_pathv is the filename */
223 pid_t pid
; /* 0 if exited */
225 char **argv
; /* program name and arguments */
226 /* was quoted when parsed; copy of struct o_string.nonnull field */
229 int argc
; /* number of program arguments */
231 struct pipe
*group
; /* if non-NULL, first in group or subshell */
233 int subshell
; /* flag, non-zero if group must be forked */
234 struct redir_struct
*redirects
; /* I/O redirections */
235 glob_t glob_result
; /* result of parameter globbing */
236 int is_stopped
; /* is the program currently running? */
237 struct pipe
*family
; /* pointer back to the child's parent pipe */
239 int sp
; /* number of SPECIAL_VAR_SYMBOL */
245 int jobid
; /* job number */
247 int num_progs
; /* total number of programs in job */
249 int running_progs
; /* number of programs running */
250 char *text
; /* name of job */
251 char *cmdbuf
; /* buffer various argv's point into */
252 pid_t pgrp
; /* process group ID for the job */
254 struct child_prog
*progs
; /* array of commands in pipe */
255 struct pipe
*next
; /* to track background commands */
257 int stopped_progs
; /* number of programs alive, but stopped */
258 int job_context
; /* bitmask defining current context */
260 pipe_style followup
; /* PIPE_BG, PIPE_SEQ, PIPE_OR, PIPE_AND */
261 reserved_style r_mode
; /* supports if, for, while, until */
267 struct close_me
*next
;
276 struct variables
*next
;
279 /* globals, connect us to the outside world
280 * the first three support $?, $#, and $1 */
283 unsigned int global_argc
;
285 static unsigned int last_return_code
;
287 extern char **environ
; /* This is in <unistd.h>, but protected with __USE_GNU */
290 /* "globals" within this file */
292 static char map
[256];
294 static int fake_mode
;
295 static int interactive
;
296 static struct close_me
*close_me_head
;
297 static const char *cwd
;
298 static struct pipe
*job_list
;
299 static unsigned int last_bg_pid
;
300 static unsigned int last_jobid
;
301 static unsigned int shell_terminal
;
304 struct variables shell_ver
= { "HUSH_VERSION", "0.01", 1, 1, 0 };
305 struct variables
*top_vars
= &shell_ver
;
307 static int flag_repeat
= 0;
308 static int do_repeat
= 0;
309 static struct variables
*top_vars
= NULL
;
310 #endif /*__U_BOOT__ */
312 #define B_CHUNK (100)
322 #define NULL_O_STRING {NULL,0,0,0,0}
323 /* used for initialization:
324 o_string foo = NULL_O_STRING; */
326 /* I can almost use ordinary FILE *. Is open_memstream() universally
327 * available? Where is it documented? */
338 int (*get
) (struct in_str
*);
339 int (*peek
) (struct in_str
*);
341 #define b_getch(input) ((input)->get(input))
342 #define b_peek(input) ((input)->peek(input))
345 #define JOB_STATUS_FORMAT "[%d] %-22s %.40s\n"
347 struct built_in_command
{
348 char *cmd
; /* name */
349 char *descr
; /* description */
350 int (*function
) (struct child_prog
*); /* function ptr */
354 /* define DEBUG_SHELL for debugging output (obviously ;-)) */
359 /* This should be in utility.c */
362 static void debug_printf(const char *format
, ...)
365 va_start(args
, format
);
366 vfprintf(stderr
, format
, args
);
370 #define debug_printf(fmt,args...) printf (fmt ,##args)
373 static inline void debug_printf(const char *format
, ...) { }
375 #define final_printf debug_printf
378 static void syntax_err(void) {
379 printf("syntax error\n");
382 static void __syntax(char *file
, int line
) {
383 error_msg("syntax error %s:%d", file
, line
);
385 #define syntax() __syntax(__FILE__, __LINE__)
389 static void *xmalloc(size_t size
);
390 static void *xrealloc(void *ptr
, size_t size
);
392 /* Index of subroutines: */
393 /* function prototypes for builtins */
394 static int builtin_cd(struct child_prog
*child
);
395 static int builtin_env(struct child_prog
*child
);
396 static int builtin_eval(struct child_prog
*child
);
397 static int builtin_exec(struct child_prog
*child
);
398 static int builtin_exit(struct child_prog
*child
);
399 static int builtin_export(struct child_prog
*child
);
400 static int builtin_fg_bg(struct child_prog
*child
);
401 static int builtin_help(struct child_prog
*child
);
402 static int builtin_jobs(struct child_prog
*child
);
403 static int builtin_pwd(struct child_prog
*child
);
404 static int builtin_read(struct child_prog
*child
);
405 static int builtin_set(struct child_prog
*child
);
406 static int builtin_shift(struct child_prog
*child
);
407 static int builtin_source(struct child_prog
*child
);
408 static int builtin_umask(struct child_prog
*child
);
409 static int builtin_unset(struct child_prog
*child
);
410 static int builtin_not_written(struct child_prog
*child
);
412 /* o_string manipulation: */
413 static int b_check_space(o_string
*o
, int len
);
414 static int b_addchr(o_string
*o
, int ch
);
415 static void b_reset(o_string
*o
);
416 static int b_addqchr(o_string
*o
, int ch
, int quote
);
418 static int b_adduint(o_string
*o
, unsigned int i
);
420 /* in_str manipulations: */
421 static int static_get(struct in_str
*i
);
422 static int static_peek(struct in_str
*i
);
423 static int file_get(struct in_str
*i
);
424 static int file_peek(struct in_str
*i
);
426 static void setup_file_in_str(struct in_str
*i
, FILE *f
);
428 static void setup_file_in_str(struct in_str
*i
);
430 static void setup_string_in_str(struct in_str
*i
, const char *s
);
432 /* close_me manipulations: */
433 static void mark_open(int fd
);
434 static void mark_closed(int fd
);
435 static void close_all(void);
437 /* "run" the final data structures: */
438 static char *indenter(int i
);
439 static int free_pipe_list(struct pipe
*head
, int indent
);
440 static int free_pipe(struct pipe
*pi
, int indent
);
441 /* really run the final data structures: */
443 static int setup_redirects(struct child_prog
*prog
, int squirrel
[]);
445 static int run_list_real(struct pipe
*pi
);
447 static void pseudo_exec(struct child_prog
*child
) __attribute__ ((noreturn
));
449 static int run_pipe_real(struct pipe
*pi
);
450 /* extended glob support: */
452 static int globhack(const char *src
, int flags
, glob_t
*pglob
);
453 static int glob_needed(const char *s
);
454 static int xglob(o_string
*dest
, int flags
, glob_t
*pglob
);
456 /* variable assignment: */
457 static int is_assignment(const char *s
);
458 /* data structure manipulation: */
460 static int setup_redirect(struct p_context
*ctx
, int fd
, redir_type style
, struct in_str
*input
);
462 static void initialize_context(struct p_context
*ctx
);
463 static int done_word(o_string
*dest
, struct p_context
*ctx
);
464 static int done_command(struct p_context
*ctx
);
465 static int done_pipe(struct p_context
*ctx
, pipe_style type
);
466 /* primary string parsing: */
468 static int redirect_dup_num(struct in_str
*input
);
469 static int redirect_opt_num(o_string
*o
);
470 static int process_command_subs(o_string
*dest
, struct p_context
*ctx
, struct in_str
*input
, int subst_end
);
471 static int parse_group(o_string
*dest
, struct p_context
*ctx
, struct in_str
*input
, int ch
);
473 static char *lookup_param(char *src
);
474 static char *make_string(char **inp
, int *nonnull
);
475 static int handle_dollar(o_string
*dest
, struct p_context
*ctx
, struct in_str
*input
);
477 static int parse_string(o_string
*dest
, struct p_context
*ctx
, const char *src
);
479 static int parse_stream(o_string
*dest
, struct p_context
*ctx
, struct in_str
*input0
, int end_trigger
);
481 static int parse_stream_outer(struct in_str
*inp
, int flag
);
483 static int parse_string_outer(const char *s
, int flag
);
484 static int parse_file_outer(FILE *f
);
487 /* job management: */
488 static int checkjobs(struct pipe
* fg_pipe
);
489 static void insert_bg_job(struct pipe
*pi
);
490 static void remove_bg_job(struct pipe
*pi
);
492 /* local variable support */
493 static char **make_list_in(char **inp
, char *name
);
494 static char *insert_var_value(char *inp
);
495 static char *insert_var_value_sub(char *inp
, int tag_subst
);
498 /* Table of built-in functions. They can be forked or not, depending on
499 * context: within pipes, they fork. As simple commands, they do not.
500 * When used in non-forking context, they can change global variables
501 * in the parent shell process. If forked, of course they can not.
502 * For example, 'unset foo | whatever' will parse and run, but foo will
503 * still be set at the end. */
504 static struct built_in_command bltins
[] = {
505 {"bg", "Resume a job in the background", builtin_fg_bg
},
506 {"break", "Exit for, while or until loop", builtin_not_written
},
507 {"cd", "Change working directory", builtin_cd
},
508 {"continue", "Continue for, while or until loop", builtin_not_written
},
509 {"env", "Print all environment variables", builtin_env
},
510 {"eval", "Construct and run shell command", builtin_eval
},
511 {"exec", "Exec command, replacing this shell with the exec'd process",
513 {"exit", "Exit from shell()", builtin_exit
},
514 {"export", "Set environment variable", builtin_export
},
515 {"fg", "Bring job into the foreground", builtin_fg_bg
},
516 {"jobs", "Lists the active jobs", builtin_jobs
},
517 {"pwd", "Print current directory", builtin_pwd
},
518 {"read", "Input environment variable", builtin_read
},
519 {"return", "Return from a function", builtin_not_written
},
520 {"set", "Set/unset shell local variables", builtin_set
},
521 {"shift", "Shift positional parameters", builtin_shift
},
522 {"trap", "Trap signals", builtin_not_written
},
523 {"ulimit","Controls resource limits", builtin_not_written
},
524 {"umask","Sets file creation mask", builtin_umask
},
525 {"unset", "Unset environment variable", builtin_unset
},
526 {".", "Source-in and run commands in a file", builtin_source
},
527 {"help", "List shell built-in commands", builtin_help
},
531 static const char *set_cwd(void)
534 cwd
= NULL
; /* xgetcwd(arg) called free(arg) */
535 cwd
= xgetcwd((char *)cwd
);
541 /* built-in 'eval' handler */
542 static int builtin_eval(struct child_prog
*child
)
545 int rcode
= EXIT_SUCCESS
;
547 if (child
->argv
[1]) {
548 str
= make_string(child
->argv
+ 1);
549 parse_string_outer(str
, FLAG_EXIT_FROM_LOOP
|
550 FLAG_PARSE_SEMICOLON
);
552 rcode
= last_return_code
;
557 /* built-in 'cd <path>' handler */
558 static int builtin_cd(struct child_prog
*child
)
561 if (child
->argv
[1] == NULL
)
562 newdir
= getenv("HOME");
564 newdir
= child
->argv
[1];
566 printf("cd: %s: %s\n", newdir
, strerror(errno
));
573 /* built-in 'env' handler */
574 static int builtin_env(struct child_prog
*dummy
)
577 if (e
== NULL
) return EXIT_FAILURE
;
584 /* built-in 'exec' handler */
585 static int builtin_exec(struct child_prog
*child
)
587 if (child
->argv
[1] == NULL
)
588 return EXIT_SUCCESS
; /* Really? */
594 /* built-in 'exit' handler */
595 static int builtin_exit(struct child_prog
*child
)
597 if (child
->argv
[1] == NULL
)
598 exit(last_return_code
);
599 exit (atoi(child
->argv
[1]));
602 /* built-in 'export VAR=value' handler */
603 static int builtin_export(struct child_prog
*child
)
606 char *name
= child
->argv
[1];
609 return (builtin_env(child
));
615 char *value
= strchr(name
, '=');
619 /* They are exporting something without an =VALUE */
621 value
= get_local_var(name
);
623 size_t ln
= strlen(name
);
625 tmp
= realloc(name
, ln
+strlen(value
)+2);
629 sprintf(tmp
+ln
, "=%s", value
);
633 /* bash does not return an error when trying to export
634 * an undefined variable. Do likewise. */
640 perror_msg("export");
642 res
= set_local_var(name
, 1);
649 /* built-in 'fg' and 'bg' handler */
650 static int builtin_fg_bg(struct child_prog
*child
)
653 struct pipe
*pi
=NULL
;
657 /* If they gave us no args, assume they want the last backgrounded task */
658 if (!child
->argv
[1]) {
659 for (pi
= job_list
; pi
; pi
= pi
->next
) {
660 if (pi
->jobid
== last_jobid
) {
665 error_msg("%s: no current job", child
->argv
[0]);
669 if (sscanf(child
->argv
[1], "%%%d", &jobnum
) != 1) {
670 error_msg("%s: bad argument '%s'", child
->argv
[0], child
->argv
[1]);
673 for (pi
= job_list
; pi
; pi
= pi
->next
) {
674 if (pi
->jobid
== jobnum
) {
679 error_msg("%s: %d: no such job", child
->argv
[0], jobnum
);
684 if (*child
->argv
[0] == 'f') {
685 /* Put the job into the foreground. */
686 tcsetpgrp(shell_terminal
, pi
->pgrp
);
689 /* Restart the processes in the job */
690 for (i
= 0; i
< pi
->num_progs
; i
++)
691 pi
->progs
[i
].is_stopped
= 0;
693 if ( (i
=kill(- pi
->pgrp
, SIGCONT
)) < 0) {
697 perror_msg("kill (SIGCONT)");
701 pi
->stopped_progs
= 0;
705 /* built-in 'help' handler */
706 static int builtin_help(struct child_prog
*dummy
)
708 struct built_in_command
*x
;
710 printf("\nBuilt-in commands:\n");
711 printf("-------------------\n");
712 for (x
= bltins
; x
->cmd
; x
++) {
715 printf("%s\t%s\n", x
->cmd
, x
->descr
);
721 /* built-in 'jobs' handler */
722 static int builtin_jobs(struct child_prog
*child
)
727 for (job
= job_list
; job
; job
= job
->next
) {
728 if (job
->running_progs
== job
->stopped_progs
)
729 status_string
= "Stopped";
731 status_string
= "Running";
733 printf(JOB_STATUS_FORMAT
, job
->jobid
, status_string
, job
->text
);
739 /* built-in 'pwd' handler */
740 static int builtin_pwd(struct child_prog
*dummy
)
746 /* built-in 'read VAR' handler */
747 static int builtin_read(struct child_prog
*child
)
751 if (child
->argv
[1]) {
755 string
[0] = 0; /* In case stdin has only EOF */
757 fgets(string
, sizeof(string
), stdin
);
759 var
= malloc(strlen(child
->argv
[1])+strlen(string
)+2);
761 sprintf(var
, "%s=%s", child
->argv
[1], string
);
762 res
= set_local_var(var
, 0);
766 fprintf(stderr
, "read: %m\n");
767 free(var
); /* So not move up to avoid breaking errno */
770 do res
=getchar(); while(res
!='\n' && res
!=EOF
);
775 /* built-in 'set VAR=value' handler */
776 static int builtin_set(struct child_prog
*child
)
778 char *temp
= child
->argv
[1];
782 for(e
= top_vars
; e
; e
=e
->next
)
783 printf("%s=%s\n", e
->name
, e
->value
);
785 set_local_var(temp
, 0);
791 /* Built-in 'shift' handler */
792 static int builtin_shift(struct child_prog
*child
)
795 if (child
->argv
[1]) {
796 n
=atoi(child
->argv
[1]);
798 if (n
>=0 && n
<global_argc
) {
799 /* XXX This probably breaks $0 */
808 /* Built-in '.' handler (read-in and execute commands from file) */
809 static int builtin_source(struct child_prog
*child
)
814 if (child
->argv
[1] == NULL
)
817 /* XXX search through $PATH is missing */
818 input
= fopen(child
->argv
[1], "r");
820 error_msg("Couldn't open file '%s'", child
->argv
[1]);
824 /* Now run the file */
825 /* XXX argv and argc are broken; need to save old global_argv
826 * (pointer only is OK!) on this stack frame,
827 * set global_argv=child->argv+1, recurse, and restore. */
828 mark_open(fileno(input
));
829 status
= parse_file_outer(input
);
830 mark_closed(fileno(input
));
835 static int builtin_umask(struct child_prog
*child
)
838 const char *arg
= child
->argv
[1];
841 new_umask
=strtoul(arg
, &end
, 8);
842 if (*end
!='\0' || end
== arg
) {
846 printf("%.3o\n", (unsigned int) (new_umask
=umask(0)));
852 /* built-in 'unset VAR' handler */
853 static int builtin_unset(struct child_prog
*child
)
855 /* bash returned already true */
856 unset_local_var(child
->argv
[1]);
860 static int builtin_not_written(struct child_prog
*child
)
862 printf("builtin_%s not written\n",child
->argv
[0]);
867 static int b_check_space(o_string
*o
, int len
)
869 /* It would be easy to drop a more restrictive policy
870 * in here, such as setting a maximum string length */
871 if (o
->length
+ len
> o
->maxlen
) {
872 char *old_data
= o
->data
;
873 /* assert (data == NULL || o->maxlen != 0); */
874 o
->maxlen
+= max(2*len
, B_CHUNK
);
875 o
->data
= realloc(o
->data
, 1 + o
->maxlen
);
876 if (o
->data
== NULL
) {
880 return o
->data
== NULL
;
883 static int b_addchr(o_string
*o
, int ch
)
885 debug_printf("b_addchr: %c %d %p\n", ch
, o
->length
, o
);
886 if (b_check_space(o
, 1)) return B_NOSPAC
;
887 o
->data
[o
->length
] = ch
;
889 o
->data
[o
->length
] = '\0';
893 static void b_reset(o_string
*o
)
897 if (o
->data
!= NULL
) *o
->data
= '\0';
900 static void b_free(o_string
*o
)
908 /* My analysis of quoting semantics tells me that state information
909 * is associated with a destination, not a source.
911 static int b_addqchr(o_string
*o
, int ch
, int quote
)
913 if (quote
&& strchr("*?[\\",ch
)) {
915 rc
= b_addchr(o
, '\\');
918 return b_addchr(o
, ch
);
922 static int b_adduint(o_string
*o
, unsigned int i
)
925 char *p
= simple_itoa(i
);
926 /* no escape checking necessary */
927 do r
=b_addchr(o
, *p
++); while (r
==0 && *p
);
932 static int static_get(struct in_str
*i
)
935 if (ch
=='\0') return EOF
;
939 static int static_peek(struct in_str
*i
)
945 static inline void cmdedit_set_initial_prompt(void)
947 #ifndef CONFIG_FEATURE_SH_FANCY_PROMPT
956 static inline void setup_prompt_string(int promptmode
, char **prompt_str
)
958 debug_printf("setup_prompt_string %d ",promptmode
);
959 #ifndef CONFIG_FEATURE_SH_FANCY_PROMPT
960 /* Set up the prompt */
961 if (promptmode
== 1) {
963 PS1
=xmalloc(strlen(cwd
)+4);
964 sprintf(PS1
, "%s %s", cwd
, ( geteuid() != 0 ) ? "$ ":"# ");
970 *prompt_str
= (promptmode
==1)? PS1
: PS2
;
972 debug_printf("result %s\n",*prompt_str
);
976 static void get_user_input(struct in_str
*i
)
980 static char the_command
[BUFSIZ
];
982 setup_prompt_string(i
->promptmode
, &prompt_str
);
983 #ifdef CONFIG_FEATURE_COMMAND_EDITING
985 ** enable command line editing only while a command line
986 ** is actually being read; otherwise, we'll end up bequeathing
987 ** atexit() handlers and other unwanted stuff to our
988 ** child processes (rob@sysgo.de)
990 cmdedit_read_input(prompt_str
, the_command
);
992 fputs(prompt_str
, stdout
);
994 the_command
[0]=fgetc(i
->file
);
1001 static char the_command
[CONFIG_SYS_CBSIZE
+ 1];
1003 bootretry_reset_cmd_timeout();
1005 if (i
->promptmode
== 1) {
1006 n
= cli_readline(CONFIG_SYS_PROMPT
);
1008 n
= cli_readline(CONFIG_SYS_PROMPT_HUSH_PS2
);
1010 #ifdef CONFIG_BOOT_RETRY_TIME
1012 puts("\nTimeout waiting for command\n");
1013 # ifdef CONFIG_RESET_TO_RETRY
1014 do_reset(NULL
, 0, 0, NULL
);
1016 # error "This currently only works with CONFIG_RESET_TO_RETRY enabled"
1024 n
= strlen(console_buffer
);
1025 console_buffer
[n
] = '\n';
1026 console_buffer
[n
+1]= '\0';
1027 if (had_ctrlc()) flag_repeat
= 0;
1030 if (i
->promptmode
== 1) {
1031 if (console_buffer
[0] == '\n'&& flag_repeat
== 0) {
1032 strcpy(the_command
,console_buffer
);
1035 if (console_buffer
[0] != '\n') {
1036 strcpy(the_command
,console_buffer
);
1046 if (console_buffer
[0] != '\n') {
1047 if (strlen(the_command
) + strlen(console_buffer
)
1048 < CONFIG_SYS_CBSIZE
) {
1049 n
= strlen(the_command
);
1050 the_command
[n
-1] = ' ';
1051 strcpy(&the_command
[n
],console_buffer
);
1054 the_command
[0] = '\n';
1055 the_command
[1] = '\0';
1059 if (i
->__promptme
== 0) {
1060 the_command
[0] = '\n';
1061 the_command
[1] = '\0';
1063 i
->p
= console_buffer
;
1068 /* This is the magic location that prints prompts
1069 * and gets data back from the user */
1070 static int file_get(struct in_str
*i
)
1075 /* If there is data waiting, eat it up */
1076 if (i
->p
&& *i
->p
) {
1079 /* need to double check i->file because we might be doing something
1080 * more complicated by now, like sourcing or substituting. */
1082 if (i
->__promptme
&& interactive
&& i
->file
== stdin
) {
1083 while(! i
->p
|| (interactive
&& strlen(i
->p
)==0) ) {
1085 while(! i
->p
|| strlen(i
->p
)==0 ) {
1093 if (i
->p
&& *i
->p
) {
1098 ch
= fgetc(i
->file
);
1102 debug_printf("b_getch: got a %d\n", ch
);
1105 if (ch
== '\n') i
->__promptme
=1;
1110 /* All the callers guarantee this routine will never be
1111 * used right after a newline, so prompting is not needed.
1113 static int file_peek(struct in_str
*i
)
1116 if (i
->p
&& *i
->p
) {
1121 i
->peek_buf
[0] = fgetc(i
->file
);
1122 i
->peek_buf
[1] = '\0';
1124 debug_printf("b_peek: got a %d\n", *i
->p
);
1131 static void setup_file_in_str(struct in_str
*i
, FILE *f
)
1133 static void setup_file_in_str(struct in_str
*i
)
1136 i
->peek
= file_peek
;
1146 static void setup_string_in_str(struct in_str
*i
, const char *s
)
1148 i
->peek
= static_peek
;
1149 i
->get
= static_get
;
1156 static void mark_open(int fd
)
1158 struct close_me
*new = xmalloc(sizeof(struct close_me
));
1160 new->next
= close_me_head
;
1161 close_me_head
= new;
1164 static void mark_closed(int fd
)
1166 struct close_me
*tmp
;
1167 if (close_me_head
== NULL
|| close_me_head
->fd
!= fd
)
1168 error_msg_and_die("corrupt close_me");
1169 tmp
= close_me_head
;
1170 close_me_head
= close_me_head
->next
;
1174 static void close_all(void)
1177 for (c
=close_me_head
; c
; c
=c
->next
) {
1180 close_me_head
= NULL
;
1183 /* squirrel != NULL means we squirrel away copies of stdin, stdout,
1184 * and stderr if they are redirected. */
1185 static int setup_redirects(struct child_prog
*prog
, int squirrel
[])
1188 struct redir_struct
*redir
;
1190 for (redir
=prog
->redirects
; redir
; redir
=redir
->next
) {
1191 if (redir
->dup
== -1 && redir
->word
.gl_pathv
== NULL
) {
1192 /* something went wrong in the parse. Pretend it didn't happen */
1195 if (redir
->dup
== -1) {
1196 mode
=redir_table
[redir
->type
].mode
;
1197 openfd
= open(redir
->word
.gl_pathv
[0], mode
, 0666);
1199 /* this could get lost if stderr has been redirected, but
1200 bash and ash both lose it as well (though zsh doesn't!) */
1201 perror_msg("error opening %s", redir
->word
.gl_pathv
[0]);
1205 openfd
= redir
->dup
;
1208 if (openfd
!= redir
->fd
) {
1209 if (squirrel
&& redir
->fd
< 3) {
1210 squirrel
[redir
->fd
] = dup(redir
->fd
);
1215 dup2(openfd
, redir
->fd
);
1216 if (redir
->dup
== -1)
1224 static void restore_redirects(int squirrel
[])
1227 for (i
=0; i
<3; i
++) {
1230 /* No error checking. I sure wouldn't know what
1231 * to do with an error if I found one! */
1239 /* XXX no exit() here. If you don't exec, use _exit instead.
1240 * The at_exit handlers apparently confuse the calling process,
1241 * in particular stdin handling. Not sure why? */
1242 static void pseudo_exec(struct child_prog
*child
)
1246 struct built_in_command
*x
;
1248 for (i
=0; is_assignment(child
->argv
[i
]); i
++) {
1249 debug_printf("pid %d environment modification: %s\n",getpid(),child
->argv
[i
]);
1250 p
= insert_var_value(child
->argv
[i
]);
1252 if (p
!= child
->argv
[i
]) free(p
);
1254 child
->argv
+=i
; /* XXX this hack isn't so horrible, since we are about
1255 to exit, and therefore don't need to keep data
1256 structures consistent for free() use. */
1257 /* If a variable is assigned in a forest, and nobody listens,
1258 * was it ever really set?
1260 if (child
->argv
[0] == NULL
) {
1261 _exit(EXIT_SUCCESS
);
1265 * Check if the command matches any of the builtins.
1266 * Depending on context, this might be redundant. But it's
1267 * easier to waste a few CPU cycles than it is to figure out
1268 * if this is one of those cases.
1270 for (x
= bltins
; x
->cmd
; x
++) {
1271 if (strcmp(child
->argv
[0], x
->cmd
) == 0 ) {
1272 debug_printf("builtin exec %s\n", child
->argv
[0]);
1273 rcode
= x
->function(child
);
1279 /* Check if the command matches any busybox internal commands
1281 * FIXME: This feature is not 100% safe, since
1282 * BusyBox is not fully reentrant, so we have no guarantee the things
1283 * from the .bss are still zeroed, or that things from .data are still
1284 * at their defaults. We could exec ourself from /proc/self/exe, but I
1285 * really dislike relying on /proc for things. We could exec ourself
1286 * from global_argv[0], but if we are in a chroot, we may not be able
1287 * to find ourself... */
1288 #ifdef CONFIG_FEATURE_SH_STANDALONE_SHELL
1291 char** argv_l
=child
->argv
;
1292 char *name
= child
->argv
[0];
1294 #ifdef CONFIG_FEATURE_SH_APPLETS_ALWAYS_WIN
1295 /* Following discussions from November 2000 on the busybox mailing
1296 * list, the default configuration, (without
1297 * get_last_path_component()) lets the user force use of an
1298 * external command by specifying the full (with slashes) filename.
1299 * If you enable CONFIG_FEATURE_SH_APPLETS_ALWAYS_WIN then applets
1300 * _aways_ override external commands, so if you want to run
1301 * /bin/cat, it will use BusyBox cat even if /bin/cat exists on the
1302 * filesystem and is _not_ busybox. Some systems may want this,
1304 name
= get_last_path_component(name
);
1306 /* Count argc for use in a second... */
1307 for(argc_l
=0;*argv_l
!=NULL
; argv_l
++, argc_l
++);
1309 debug_printf("running applet %s\n", name
);
1310 run_applet_by_name(name
, argc_l
, child
->argv
);
1313 debug_printf("exec of %s\n",child
->argv
[0]);
1314 execvp(child
->argv
[0],child
->argv
);
1315 perror_msg("couldn't exec: %s",child
->argv
[0]);
1317 } else if (child
->group
) {
1318 debug_printf("runtime nesting to group\n");
1319 interactive
=0; /* crucial!!!! */
1320 rcode
= run_list_real(child
->group
);
1321 /* OK to leak memory by not calling free_pipe_list,
1322 * since this process is about to exit */
1325 /* Can happen. See what bash does with ">foo" by itself. */
1326 debug_printf("trying to pseudo_exec null command\n");
1327 _exit(EXIT_SUCCESS
);
1331 static void insert_bg_job(struct pipe
*pi
)
1333 struct pipe
*thejob
;
1335 /* Linear search for the ID of the job to use */
1337 for (thejob
= job_list
; thejob
; thejob
= thejob
->next
)
1338 if (thejob
->jobid
>= pi
->jobid
)
1339 pi
->jobid
= thejob
->jobid
+ 1;
1341 /* add thejob to the list of running jobs */
1343 thejob
= job_list
= xmalloc(sizeof(*thejob
));
1345 for (thejob
= job_list
; thejob
->next
; thejob
= thejob
->next
) /* nothing */;
1346 thejob
->next
= xmalloc(sizeof(*thejob
));
1347 thejob
= thejob
->next
;
1350 /* physically copy the struct job */
1351 memcpy(thejob
, pi
, sizeof(struct pipe
));
1352 thejob
->next
= NULL
;
1353 thejob
->running_progs
= thejob
->num_progs
;
1354 thejob
->stopped_progs
= 0;
1355 thejob
->text
= xmalloc(BUFSIZ
); /* cmdedit buffer size */
1357 /*if (pi->progs[0] && pi->progs[0].argv && pi->progs[0].argv[0]) */
1359 char *bar
=thejob
->text
;
1360 char **foo
=pi
->progs
[0].argv
;
1361 while(foo
&& *foo
) {
1362 bar
+= sprintf(bar
, "%s ", *foo
++);
1366 /* we don't wait for background thejobs to return -- append it
1367 to the list of backgrounded thejobs and leave it alone */
1368 printf("[%d] %d\n", thejob
->jobid
, thejob
->progs
[0].pid
);
1369 last_bg_pid
= thejob
->progs
[0].pid
;
1370 last_jobid
= thejob
->jobid
;
1373 /* remove a backgrounded job */
1374 static void remove_bg_job(struct pipe
*pi
)
1376 struct pipe
*prev_pipe
;
1378 if (pi
== job_list
) {
1379 job_list
= pi
->next
;
1381 prev_pipe
= job_list
;
1382 while (prev_pipe
->next
!= pi
)
1383 prev_pipe
= prev_pipe
->next
;
1384 prev_pipe
->next
= pi
->next
;
1387 last_jobid
= job_list
->jobid
;
1391 pi
->stopped_progs
= 0;
1396 /* Checks to see if any processes have exited -- if they
1397 have, figure out why and see if a job has completed */
1398 static int checkjobs(struct pipe
* fg_pipe
)
1406 attributes
= WUNTRACED
;
1407 if (fg_pipe
==NULL
) {
1408 attributes
|= WNOHANG
;
1411 while ((childpid
= waitpid(-1, &status
, attributes
)) > 0) {
1414 for (i
=0; i
< fg_pipe
->num_progs
; i
++) {
1415 if (fg_pipe
->progs
[i
].pid
== childpid
) {
1416 if (i
==fg_pipe
->num_progs
-1)
1417 rcode
=WEXITSTATUS(status
);
1418 (fg_pipe
->num_progs
)--;
1424 for (pi
= job_list
; pi
; pi
= pi
->next
) {
1426 while (prognum
< pi
->num_progs
&& pi
->progs
[prognum
].pid
!= childpid
) {
1429 if (prognum
< pi
->num_progs
)
1434 debug_printf("checkjobs: pid %d was not in our list!\n", childpid
);
1438 if (WIFEXITED(status
) || WIFSIGNALED(status
)) {
1440 pi
->running_progs
--;
1441 pi
->progs
[prognum
].pid
= 0;
1443 if (!pi
->running_progs
) {
1444 printf(JOB_STATUS_FORMAT
, pi
->jobid
, "Done", pi
->text
);
1449 pi
->stopped_progs
++;
1450 pi
->progs
[prognum
].is_stopped
= 1;
1453 /* Printing this stuff is a pain, since it tends to
1454 * overwrite the prompt an inconveinient moments. So
1456 if (pi
->stopped_progs
== pi
->num_progs
) {
1457 printf("\n"JOB_STATUS_FORMAT
, pi
->jobid
, "Stopped", pi
->text
);
1463 if (childpid
== -1 && errno
!= ECHILD
)
1464 perror_msg("waitpid");
1466 /* move the shell to the foreground */
1467 /*if (interactive && tcsetpgrp(shell_terminal, getpgid(0))) */
1468 /* perror_msg("tcsetpgrp-2"); */
1472 /* Figure out our controlling tty, checking in order stderr,
1473 * stdin, and stdout. If check_pgrp is set, also check that
1474 * we belong to the foreground process group associated with
1475 * that tty. The value of shell_terminal is needed in order to call
1476 * tcsetpgrp(shell_terminal, ...); */
1477 void controlling_tty(int check_pgrp
)
1481 if ((curpgrp
= tcgetpgrp(shell_terminal
= 2)) < 0
1482 && (curpgrp
= tcgetpgrp(shell_terminal
= 0)) < 0
1483 && (curpgrp
= tcgetpgrp(shell_terminal
= 1)) < 0)
1484 goto shell_terminal_error
;
1486 if (check_pgrp
&& curpgrp
!= getpgid(0))
1487 goto shell_terminal_error
;
1491 shell_terminal_error
:
1492 shell_terminal
= -1;
1497 /* run_pipe_real() starts all the jobs, but doesn't wait for anything
1498 * to finish. See checkjobs().
1500 * return code is normally -1, when the caller has to wait for children
1501 * to finish to determine the exit status of the pipe. If the pipe
1502 * is a simple builtin command, however, the action is done by the
1503 * time run_pipe_real returns, and the exit code is provided as the
1506 * The input of the pipe is always stdin, the output is always
1507 * stdout. The outpipe[] mechanism in BusyBox-0.48 lash is bogus,
1508 * because it tries to avoid running the command substitution in
1509 * subshell, when that is in fact necessary. The subshell process
1510 * now has its stdout directed to the input of the appropriate pipe,
1511 * so this routine is noticeably simpler.
1513 static int run_pipe_real(struct pipe
*pi
)
1517 int nextin
, nextout
;
1518 int pipefds
[2]; /* pipefds[0] is for reading */
1519 struct child_prog
*child
;
1520 struct built_in_command
*x
;
1523 /* Avoid longjmp clobbering */
1531 int flag
= do_repeat
? CMD_FLAG_REPEAT
: 0;
1532 struct child_prog
*child
;
1535 /* Avoid longjmp clobbering */
1540 #endif /* __U_BOOT__ */
1547 /* Check if this is a simple builtin (not part of a pipe).
1548 * Builtins within pipes have to fork anyway, and are handled in
1549 * pseudo_exec. "echo foo | read bar" doesn't work on bash, either.
1551 if (pi
->num_progs
== 1) child
= & (pi
->progs
[0]);
1553 if (pi
->num_progs
== 1 && child
->group
&& child
->subshell
== 0) {
1554 int squirrel
[] = {-1, -1, -1};
1556 debug_printf("non-subshell grouping\n");
1557 setup_redirects(child
, squirrel
);
1558 /* XXX could we merge code with following builtin case,
1559 * by creating a pseudo builtin that calls run_list_real? */
1560 rcode
= run_list_real(child
->group
);
1561 restore_redirects(squirrel
);
1563 if (pi
->num_progs
== 1 && child
->group
) {
1565 debug_printf("non-subshell grouping\n");
1566 rcode
= run_list_real(child
->group
);
1569 } else if (pi
->num_progs
== 1 && pi
->progs
[0].argv
!= NULL
) {
1570 for (i
=0; is_assignment(child
->argv
[i
]); i
++) { /* nothing */ }
1571 if (i
!=0 && child
->argv
[i
]==NULL
) {
1572 /* assignments, but no command: set the local environment */
1573 for (i
=0; child
->argv
[i
]!=NULL
; i
++) {
1575 /* Ok, this case is tricky. We have to decide if this is a
1576 * local variable, or an already exported variable. If it is
1577 * already exported, we have to export the new value. If it is
1578 * not exported, we need only set this as a local variable.
1579 * This junk is all to decide whether or not to export this
1583 name
= xstrdup(child
->argv
[i
]);
1584 debug_printf("Local environment set: %s\n", name
);
1585 value
= strchr(name
, '=');
1589 if ( get_local_var(name
)) {
1594 p
= insert_var_value(child
->argv
[i
]);
1595 set_local_var(p
, export_me
);
1596 if (p
!= child
->argv
[i
]) free(p
);
1598 return EXIT_SUCCESS
; /* don't worry about errors in set_local_var() yet */
1600 for (i
= 0; is_assignment(child
->argv
[i
]); i
++) {
1601 p
= insert_var_value(child
->argv
[i
]);
1605 set_local_var(p
, 0);
1607 if (p
!= child
->argv
[i
]) {
1615 str
= make_string(child
->argv
+ i
,
1616 child
->argv_nonnull
+ i
);
1617 parse_string_outer(str
, FLAG_EXIT_FROM_LOOP
| FLAG_REPARSING
);
1619 return last_return_code
;
1622 for (x
= bltins
; x
->cmd
; x
++) {
1623 if (strcmp(child
->argv
[i
], x
->cmd
) == 0 ) {
1624 int squirrel
[] = {-1, -1, -1};
1626 if (x
->function
== builtin_exec
&& child
->argv
[i
+1]==NULL
) {
1627 debug_printf("magic exec\n");
1628 setup_redirects(child
,NULL
);
1629 return EXIT_SUCCESS
;
1631 debug_printf("builtin inline %s\n", child
->argv
[0]);
1632 /* XXX setup_redirects acts on file descriptors, not FILEs.
1633 * This is perfect for work that comes after exec().
1634 * Is it really safe for inline use? Experimentally,
1635 * things seem to work with glibc. */
1636 setup_redirects(child
, squirrel
);
1638 child
->argv
+= i
; /* XXX horrible hack */
1639 rcode
= x
->function(child
);
1640 /* XXX restore hack so free() can work right */
1642 restore_redirects(squirrel
);
1647 /* check ";", because ,example , argv consist from
1648 * "help;flinfo" must not execute
1650 if (strchr(child
->argv
[i
], ';')) {
1651 printf("Unknown command '%s' - try 'help' or use "
1652 "'run' command\n", child
->argv
[i
]);
1655 /* Process the command */
1656 return cmd_process(flag
, child
->argc
, child
->argv
,
1657 &flag_repeat
, NULL
);
1662 for (i
= 0; i
< pi
->num_progs
; i
++) {
1663 child
= & (pi
->progs
[i
]);
1665 /* pipes are inserted between pairs of commands */
1666 if ((i
+ 1) < pi
->num_progs
) {
1667 if (pipe(pipefds
)<0) perror_msg_and_die("pipe");
1668 nextout
= pipefds
[1];
1674 /* XXX test for failed fork()? */
1675 if (!(child
->pid
= fork())) {
1676 /* Set the handling for job control signals back to the default. */
1677 signal(SIGINT
, SIG_DFL
);
1678 signal(SIGQUIT
, SIG_DFL
);
1679 signal(SIGTERM
, SIG_DFL
);
1680 signal(SIGTSTP
, SIG_DFL
);
1681 signal(SIGTTIN
, SIG_DFL
);
1682 signal(SIGTTOU
, SIG_DFL
);
1683 signal(SIGCHLD
, SIG_DFL
);
1695 if (pipefds
[0]!=-1) {
1696 close(pipefds
[0]); /* opposite end of our output pipe */
1699 /* Like bash, explicit redirects override pipes,
1700 * and the pipe fd is available for dup'ing. */
1701 setup_redirects(child
,NULL
);
1703 if (interactive
&& pi
->followup
!=PIPE_BG
) {
1704 /* If we (the child) win the race, put ourselves in the process
1705 * group whose leader is the first process in this pipe. */
1707 pi
->pgrp
= getpid();
1709 if (setpgid(0, pi
->pgrp
) == 0) {
1710 tcsetpgrp(2, pi
->pgrp
);
1718 /* put our child in the process group whose leader is the
1719 first process in this pipe */
1721 pi
->pgrp
= child
->pid
;
1723 /* Don't check for errors. The child may be dead already,
1724 * in which case setpgid returns error code EACCES. */
1725 setpgid(child
->pid
, pi
->pgrp
);
1732 /* If there isn't another process, nextin is garbage
1733 but it doesn't matter */
1734 nextin
= pipefds
[0];
1740 static int run_list_real(struct pipe
*pi
)
1742 char *save_name
= NULL
;
1744 char **save_list
= NULL
;
1750 int rcode
=0, flag_skip
=1;
1751 int flag_restore
= 0;
1752 int if_code
=0, next_if_code
=0; /* need double-buffer to handle elif */
1753 reserved_style rmode
, skip_more_in_this_rmode
=RES_XXXX
;
1754 /* check syntax for "for" */
1755 for (rpipe
= pi
; rpipe
; rpipe
= rpipe
->next
) {
1756 if ((rpipe
->r_mode
== RES_IN
||
1757 rpipe
->r_mode
== RES_FOR
) &&
1758 (rpipe
->next
== NULL
)) {
1765 if ((rpipe
->r_mode
== RES_IN
&&
1766 (rpipe
->next
->r_mode
== RES_IN
&&
1767 rpipe
->next
->progs
->argv
!= NULL
))||
1768 (rpipe
->r_mode
== RES_FOR
&&
1769 rpipe
->next
->r_mode
!= RES_IN
)) {
1777 for (; pi
; pi
= (flag_restore
!= 0) ? rpipe
: pi
->next
) {
1778 if (pi
->r_mode
== RES_WHILE
|| pi
->r_mode
== RES_UNTIL
||
1779 pi
->r_mode
== RES_FOR
) {
1783 if ((had_ctrlc())) {
1794 debug_printf("rmode=%d if_code=%d next_if_code=%d skip_more=%d\n", rmode
, if_code
, next_if_code
, skip_more_in_this_rmode
);
1795 if (rmode
== skip_more_in_this_rmode
&& flag_skip
) {
1796 if (pi
->followup
== PIPE_SEQ
) flag_skip
=0;
1800 skip_more_in_this_rmode
= RES_XXXX
;
1801 if (rmode
== RES_THEN
|| rmode
== RES_ELSE
) if_code
= next_if_code
;
1802 if (rmode
== RES_THEN
&& if_code
) continue;
1803 if (rmode
== RES_ELSE
&& !if_code
) continue;
1804 if (rmode
== RES_ELIF
&& !if_code
) break;
1805 if (rmode
== RES_FOR
&& pi
->num_progs
) {
1807 /* if no variable values after "in" we skip "for" */
1808 if (!pi
->next
->progs
->argv
) continue;
1809 /* create list of variable values */
1810 list
= make_list_in(pi
->next
->progs
->argv
,
1811 pi
->progs
->argv
[0]);
1813 save_name
= pi
->progs
->argv
[0];
1814 pi
->progs
->argv
[0] = NULL
;
1818 free(pi
->progs
->argv
[0]);
1822 pi
->progs
->argv
[0] = save_name
;
1824 pi
->progs
->glob_result
.gl_pathv
[0] =
1829 /* insert new value from list for variable */
1830 if (pi
->progs
->argv
[0])
1831 free(pi
->progs
->argv
[0]);
1832 pi
->progs
->argv
[0] = *list
++;
1834 pi
->progs
->glob_result
.gl_pathv
[0] =
1839 if (rmode
== RES_IN
) continue;
1840 if (rmode
== RES_DO
) {
1841 if (!flag_rep
) continue;
1843 if (rmode
== RES_DONE
) {
1850 if (pi
->num_progs
== 0) continue;
1852 save_num_progs
= pi
->num_progs
; /* save number of programs */
1854 rcode
= run_pipe_real(pi
);
1855 debug_printf("run_pipe_real returned %d\n",rcode
);
1858 /* We only ran a builtin: rcode was set by the return value
1859 * of run_pipe_real(), and we don't need to wait for anything. */
1860 } else if (pi
->followup
==PIPE_BG
) {
1861 /* XXX check bash's behavior with nontrivial pipes */
1862 /* XXX compute jobid */
1863 /* XXX what does bash do with attempts to background builtins? */
1865 rcode
= EXIT_SUCCESS
;
1868 /* move the new process group into the foreground */
1869 if (tcsetpgrp(shell_terminal
, pi
->pgrp
) && errno
!= ENOTTY
)
1870 perror_msg("tcsetpgrp-3");
1871 rcode
= checkjobs(pi
);
1872 /* move the shell to the foreground */
1873 if (tcsetpgrp(shell_terminal
, getpgid(0)) && errno
!= ENOTTY
)
1874 perror_msg("tcsetpgrp-4");
1876 rcode
= checkjobs(pi
);
1878 debug_printf("checkjobs returned %d\n",rcode
);
1880 last_return_code
=rcode
;
1883 last_return_code
= -rcode
- 2;
1884 return -2; /* exit */
1886 last_return_code
=(rcode
== 0) ? 0 : 1;
1889 pi
->num_progs
= save_num_progs
; /* restore number of programs */
1891 if ( rmode
== RES_IF
|| rmode
== RES_ELIF
)
1892 next_if_code
=rcode
; /* can be overwritten a number of times */
1893 if (rmode
== RES_WHILE
)
1894 flag_rep
= !last_return_code
;
1895 if (rmode
== RES_UNTIL
)
1896 flag_rep
= last_return_code
;
1897 if ( (rcode
==EXIT_SUCCESS
&& pi
->followup
==PIPE_OR
) ||
1898 (rcode
!=EXIT_SUCCESS
&& pi
->followup
==PIPE_AND
) )
1899 skip_more_in_this_rmode
=rmode
;
1907 /* broken, of course, but OK for testing */
1908 static char *indenter(int i
)
1910 static char blanks
[]=" ";
1911 return &blanks
[sizeof(blanks
)-i
-1];
1914 /* return code is the exit status of the pipe */
1915 static int free_pipe(struct pipe
*pi
, int indent
)
1918 struct child_prog
*child
;
1920 struct redir_struct
*r
, *rnext
;
1922 int a
, i
, ret_code
=0;
1923 char *ind
= indenter(indent
);
1926 if (pi
->stopped_progs
> 0)
1928 final_printf("%s run pipe: (pid %d)\n",ind
,getpid());
1930 for (i
=0; i
<pi
->num_progs
; i
++) {
1931 child
= &pi
->progs
[i
];
1932 final_printf("%s command %d:\n",ind
,i
);
1934 for (a
=0,p
=child
->argv
; *p
; a
++,p
++) {
1935 final_printf("%s argv[%d] = %s\n",ind
,a
,*p
);
1938 globfree(&child
->glob_result
);
1940 for (a
= 0; a
< child
->argc
; a
++) {
1941 free(child
->argv
[a
]);
1944 free(child
->argv_nonnull
);
1948 } else if (child
->group
) {
1950 final_printf("%s begin group (subshell:%d)\n",ind
, child
->subshell
);
1952 ret_code
= free_pipe_list(child
->group
,indent
+3);
1953 final_printf("%s end group\n",ind
);
1955 final_printf("%s (nil)\n",ind
);
1958 for (r
=child
->redirects
; r
; r
=rnext
) {
1959 final_printf("%s redirect %d%s", ind
, r
->fd
, redir_table
[r
->type
].descrip
);
1961 /* guard against the case >$FOO, where foo is unset or blank */
1962 if (r
->word
.gl_pathv
) {
1963 final_printf(" %s\n", *r
->word
.gl_pathv
);
1967 final_printf("&%d\n", r
->dup
);
1972 child
->redirects
=NULL
;
1975 free(pi
->progs
); /* children are an array, they get freed all at once */
1980 static int free_pipe_list(struct pipe
*head
, int indent
)
1982 int rcode
=0; /* if list has no members */
1983 struct pipe
*pi
, *next
;
1984 char *ind
= indenter(indent
);
1985 for (pi
=head
; pi
; pi
=next
) {
1986 final_printf("%s pipe reserved mode %d\n", ind
, pi
->r_mode
);
1987 rcode
= free_pipe(pi
, indent
);
1988 final_printf("%s pipe followup code %d\n", ind
, pi
->followup
);
1996 /* Select which version we will use */
1997 static int run_list(struct pipe
*pi
)
2003 rcode
= run_list_real(pi
);
2007 /* free_pipe_list has the side effect of clearing memory
2008 * In the long run that function can be merged with run_list_real,
2009 * but doing that now would hobble the debugging effort. */
2010 free_pipe_list(pi
,0);
2014 /* The API for glob is arguably broken. This routine pushes a non-matching
2015 * string into the output structure, removing non-backslashed backslashes.
2016 * If someone can prove me wrong, by performing this function within the
2017 * original glob(3) api, feel free to rewrite this routine into oblivion.
2018 * Return code (0 vs. GLOB_NOSPACE) matches glob(3).
2019 * XXX broken if the last character is '\\', check that before calling.
2022 static int globhack(const char *src
, int flags
, glob_t
*pglob
)
2027 for (cnt
=1, s
=src
; s
&& *s
; s
++) {
2028 if (*s
== '\\') s
++;
2032 if (!dest
) return GLOB_NOSPACE
;
2033 if (!(flags
& GLOB_APPEND
)) {
2034 pglob
->gl_pathv
=NULL
;
2039 pathc
= ++pglob
->gl_pathc
;
2040 pglob
->gl_pathv
= realloc(pglob
->gl_pathv
, (pathc
+1)*sizeof(*pglob
->gl_pathv
));
2041 if (pglob
->gl_pathv
== NULL
) return GLOB_NOSPACE
;
2042 pglob
->gl_pathv
[pathc
-1]=dest
;
2043 pglob
->gl_pathv
[pathc
]=NULL
;
2044 for (s
=src
; s
&& *s
; s
++, dest
++) {
2045 if (*s
== '\\') s
++;
2052 /* XXX broken if the last character is '\\', check that before calling */
2053 static int glob_needed(const char *s
)
2056 if (*s
== '\\') s
++;
2057 if (strchr("*[?",*s
)) return 1;
2063 static void globprint(glob_t
*pglob
)
2066 debug_printf("glob_t at %p:\n", pglob
);
2067 debug_printf(" gl_pathc=%d gl_pathv=%p gl_offs=%d gl_flags=%d\n",
2068 pglob
->gl_pathc
, pglob
->gl_pathv
, pglob
->gl_offs
, pglob
->gl_flags
);
2069 for (i
=0; i
<pglob
->gl_pathc
; i
++)
2070 debug_printf("pglob->gl_pathv[%d] = %p = %s\n", i
,
2071 pglob
->gl_pathv
[i
], pglob
->gl_pathv
[i
]);
2075 static int xglob(o_string
*dest
, int flags
, glob_t
*pglob
)
2079 /* short-circuit for null word */
2080 /* we can code this better when the debug_printf's are gone */
2081 if (dest
->length
== 0) {
2082 if (dest
->nonnull
) {
2083 /* bash man page calls this an "explicit" null */
2084 gr
= globhack(dest
->data
, flags
, pglob
);
2085 debug_printf("globhack returned %d\n",gr
);
2089 } else if (glob_needed(dest
->data
)) {
2090 gr
= glob(dest
->data
, flags
, NULL
, pglob
);
2091 debug_printf("glob returned %d\n",gr
);
2092 if (gr
== GLOB_NOMATCH
) {
2093 /* quote removal, or more accurately, backslash removal */
2094 gr
= globhack(dest
->data
, flags
, pglob
);
2095 debug_printf("globhack returned %d\n",gr
);
2098 gr
= globhack(dest
->data
, flags
, pglob
);
2099 debug_printf("globhack returned %d\n",gr
);
2101 if (gr
== GLOB_NOSPACE
)
2102 error_msg_and_die("out of memory during glob");
2103 if (gr
!= 0) { /* GLOB_ABORTED ? */
2104 error_msg("glob(3) error %d",gr
);
2106 /* globprint(glob_target); */
2112 static char *get_dollar_var(char ch
);
2115 /* This is used to get/check local shell variables */
2116 char *get_local_var(const char *s
)
2118 struct variables
*cur
;
2125 return get_dollar_var(s
[1]);
2128 for (cur
= top_vars
; cur
; cur
=cur
->next
)
2129 if(strcmp(cur
->name
, s
)==0)
2134 /* This is used to set local shell variables
2135 flg_export==0 if only local (not exporting) variable
2136 flg_export==1 if "new" exporting environ
2137 flg_export>1 if current startup environ (not call putenv()) */
2138 int set_local_var(const char *s
, int flg_export
)
2142 struct variables
*cur
;
2145 /* might be possible! */
2153 if (getenv(name
) != NULL
) {
2155 "There is a global environment variable with the same name.\n");
2160 /* Assume when we enter this function that we are already in
2161 * NAME=VALUE format. So the first order of business is to
2162 * split 's' on the '=' into 'name' and 'value' */
2163 value
= strchr(name
, '=');
2164 if (value
== NULL
&& ++value
== NULL
) {
2170 for(cur
= top_vars
; cur
; cur
= cur
->next
) {
2171 if(strcmp(cur
->name
, name
)==0)
2176 if(strcmp(cur
->value
, value
)==0) {
2177 if(flg_export
>0 && cur
->flg_export
==0)
2178 cur
->flg_export
=flg_export
;
2182 if(cur
->flg_read_only
) {
2183 error_msg("%s: readonly variable", name
);
2186 if(flg_export
>0 || cur
->flg_export
>1)
2190 cur
->value
= strdup(value
);
2194 cur
= malloc(sizeof(struct variables
));
2198 cur
->name
= strdup(name
);
2199 if (cur
->name
== NULL
) {
2203 struct variables
*bottom
= top_vars
;
2204 cur
->value
= strdup(value
);
2206 cur
->flg_export
= flg_export
;
2207 cur
->flg_read_only
= 0;
2208 while(bottom
->next
) bottom
=bottom
->next
;
2215 if(result
==0 && cur
->flg_export
==1) {
2217 result
= putenv(name
);
2222 if(result
>0) /* equivalent to previous set */
2229 void unset_local_var(const char *name
)
2231 struct variables
*cur
;
2234 for (cur
= top_vars
; cur
; cur
=cur
->next
) {
2235 if(strcmp(cur
->name
, name
)==0)
2239 struct variables
*next
= top_vars
;
2240 if(cur
->flg_read_only
) {
2241 error_msg("%s: readonly variable", name
);
2246 unsetenv(cur
->name
);
2250 while (next
->next
!= cur
)
2252 next
->next
= cur
->next
;
2259 static int is_assignment(const char *s
)
2264 if (!isalpha(*s
)) return 0;
2266 while(isalnum(*s
) || *s
=='_') ++s
;
2271 /* the src parameter allows us to peek forward to a possible &n syntax
2272 * for file descriptor duplication, e.g., "2>&1".
2273 * Return code is 0 normally, 1 if a syntax error is detected in src.
2274 * Resource errors (in xmalloc) cause the process to exit */
2275 static int setup_redirect(struct p_context
*ctx
, int fd
, redir_type style
,
2276 struct in_str
*input
)
2278 struct child_prog
*child
=ctx
->child
;
2279 struct redir_struct
*redir
= child
->redirects
;
2280 struct redir_struct
*last_redir
=NULL
;
2282 /* Create a new redir_struct and drop it onto the end of the linked list */
2287 redir
= xmalloc(sizeof(struct redir_struct
));
2289 redir
->word
.gl_pathv
=NULL
;
2291 last_redir
->next
=redir
;
2293 child
->redirects
=redir
;
2297 redir
->fd
= (fd
==-1) ? redir_table
[style
].default_fd
: fd
;
2299 debug_printf("Redirect type %d%s\n", redir
->fd
, redir_table
[style
].descrip
);
2301 /* Check for a '2>&1' type redirect */
2302 redir
->dup
= redirect_dup_num(input
);
2303 if (redir
->dup
== -2) return 1; /* syntax error */
2304 if (redir
->dup
!= -1) {
2305 /* Erik had a check here that the file descriptor in question
2306 * is legit; I postpone that to "run time"
2307 * A "-" representation of "close me" shows up as a -3 here */
2308 debug_printf("Duplicating redirect '%d>&%d'\n", redir
->fd
, redir
->dup
);
2310 /* We do _not_ try to open the file that src points to,
2311 * since we need to return and let src be expanded first.
2312 * Set ctx->pending_redirect, so we know what to do at the
2313 * end of the next parsed word.
2315 ctx
->pending_redirect
= redir
;
2321 static struct pipe
*new_pipe(void)
2324 pi
= xmalloc(sizeof(struct pipe
));
2328 pi
->followup
= 0; /* invalid */
2329 pi
->r_mode
= RES_NONE
;
2333 static void initialize_context(struct p_context
*ctx
)
2337 ctx
->pending_redirect
=NULL
;
2340 ctx
->list_head
=new_pipe();
2341 ctx
->pipe
=ctx
->list_head
;
2347 done_command(ctx
); /* creates the memory for working child */
2350 /* normal return is 0
2351 * if a reserved word is found, and processed, return 1
2352 * should handle if, then, elif, else, fi, for, while, until, do, done.
2353 * case, function, and select are obnoxious, save those for later.
2355 struct reserved_combo
{
2360 /* Mostly a list of accepted follow-up reserved words.
2361 * FLAG_END means we are done with the sequence, and are ready
2362 * to turn the compound list into a command.
2363 * FLAG_START means the word must start a new compound list.
2365 static struct reserved_combo reserved_list
[] = {
2366 { "if", RES_IF
, FLAG_THEN
| FLAG_START
},
2367 { "then", RES_THEN
, FLAG_ELIF
| FLAG_ELSE
| FLAG_FI
},
2368 { "elif", RES_ELIF
, FLAG_THEN
},
2369 { "else", RES_ELSE
, FLAG_FI
},
2370 { "fi", RES_FI
, FLAG_END
},
2371 { "for", RES_FOR
, FLAG_IN
| FLAG_START
},
2372 { "while", RES_WHILE
, FLAG_DO
| FLAG_START
},
2373 { "until", RES_UNTIL
, FLAG_DO
| FLAG_START
},
2374 { "in", RES_IN
, FLAG_DO
},
2375 { "do", RES_DO
, FLAG_DONE
},
2376 { "done", RES_DONE
, FLAG_END
}
2378 #define NRES (sizeof(reserved_list)/sizeof(struct reserved_combo))
2380 static int reserved_word(o_string
*dest
, struct p_context
*ctx
)
2382 struct reserved_combo
*r
;
2383 for (r
=reserved_list
;
2384 r
<reserved_list
+NRES
; r
++) {
2385 if (strcmp(dest
->data
, r
->literal
) == 0) {
2386 debug_printf("found reserved word %s, code %d\n",r
->literal
,r
->code
);
2387 if (r
->flag
& FLAG_START
) {
2388 struct p_context
*new = xmalloc(sizeof(struct p_context
));
2389 debug_printf("push stack\n");
2390 if (ctx
->w
== RES_IN
|| ctx
->w
== RES_FOR
) {
2397 *new = *ctx
; /* physical copy */
2398 initialize_context(ctx
);
2400 } else if ( ctx
->w
== RES_NONE
|| ! (ctx
->old_flag
& (1<<r
->code
))) {
2407 ctx
->old_flag
= r
->flag
;
2408 if (ctx
->old_flag
& FLAG_END
) {
2409 struct p_context
*old
;
2410 debug_printf("pop stack\n");
2411 done_pipe(ctx
,PIPE_SEQ
);
2413 old
->child
->group
= ctx
->list_head
;
2415 old
->child
->subshell
= 0;
2417 *ctx
= *old
; /* physical copy */
2427 /* normal return is 0.
2428 * Syntax or xglob errors return 1. */
2429 static int done_word(o_string
*dest
, struct p_context
*ctx
)
2431 struct child_prog
*child
=ctx
->child
;
2433 glob_t
*glob_target
;
2440 debug_printf("done_word: %s %p\n", dest
->data
, child
);
2441 if (dest
->length
== 0 && !dest
->nonnull
) {
2442 debug_printf(" true null, ignored\n");
2446 if (ctx
->pending_redirect
) {
2447 glob_target
= &ctx
->pending_redirect
->word
;
2452 return 1; /* syntax error, groups and arglists don't mix */
2454 if (!child
->argv
&& (ctx
->type
& FLAG_PARSE_SEMICOLON
)) {
2455 debug_printf("checking %s for reserved-ness\n",dest
->data
);
2456 if (reserved_word(dest
,ctx
)) return ctx
->w
==RES_SNTX
;
2459 glob_target
= &child
->glob_result
;
2460 if (child
->argv
) flags
|= GLOB_APPEND
;
2462 for (cnt
= 1, s
= dest
->data
; s
&& *s
; s
++) {
2463 if (*s
== '\\') s
++;
2468 if ( child
->argv
== NULL
) {
2471 argc
= ++child
->argc
;
2472 child
->argv
= realloc(child
->argv
, (argc
+1)*sizeof(*child
->argv
));
2473 if (child
->argv
== NULL
) return 1;
2474 child
->argv_nonnull
= realloc(child
->argv_nonnull
,
2475 (argc
+1)*sizeof(*child
->argv_nonnull
));
2476 if (child
->argv_nonnull
== NULL
)
2478 child
->argv
[argc
-1]=str
;
2479 child
->argv_nonnull
[argc
-1] = dest
->nonnull
;
2480 child
->argv
[argc
]=NULL
;
2481 child
->argv_nonnull
[argc
] = 0;
2482 for (s
= dest
->data
; s
&& *s
; s
++,str
++) {
2483 if (*s
== '\\') s
++;
2490 gr
= xglob(dest
, flags
, glob_target
);
2491 if (gr
!= 0) return 1;
2496 if (ctx
->pending_redirect
) {
2497 ctx
->pending_redirect
=NULL
;
2498 if (glob_target
->gl_pathc
!= 1) {
2499 error_msg("ambiguous redirect");
2503 child
->argv
= glob_target
->gl_pathv
;
2506 if (ctx
->w
== RES_FOR
) {
2507 done_word(dest
,ctx
);
2508 done_pipe(ctx
,PIPE_SEQ
);
2513 /* The only possible error here is out of memory, in which case
2515 static int done_command(struct p_context
*ctx
)
2517 /* The child is really already in the pipe structure, so
2518 * advance the pipe counter and make a new, null child.
2519 * Only real trickiness here is that the uncommitted
2520 * child structure, to which ctx->child points, is not
2521 * counted in pi->num_progs. */
2522 struct pipe
*pi
=ctx
->pipe
;
2523 struct child_prog
*prog
=ctx
->child
;
2525 if (prog
&& prog
->group
== NULL
2526 && prog
->argv
== NULL
2528 && prog
->redirects
== NULL
) {
2532 debug_printf("done_command: skipping null command\n");
2536 debug_printf("done_command: num_progs incremented to %d\n",pi
->num_progs
);
2538 debug_printf("done_command: initializing\n");
2540 pi
->progs
= xrealloc(pi
->progs
, sizeof(*pi
->progs
) * (pi
->num_progs
+1));
2542 prog
= pi
->progs
+ pi
->num_progs
;
2544 prog
->redirects
= NULL
;
2547 prog
->argv_nonnull
= NULL
;
2549 prog
->is_stopped
= 0;
2553 prog
->glob_result
.gl_pathv
= NULL
;
2558 prog
->type
= ctx
->type
;
2560 /* but ctx->pipe and ctx->list_head remain unchanged */
2564 static int done_pipe(struct p_context
*ctx
, pipe_style type
)
2567 done_command(ctx
); /* implicit closure of previous command */
2568 debug_printf("done_pipe, type %d\n", type
);
2569 ctx
->pipe
->followup
= type
;
2570 ctx
->pipe
->r_mode
= ctx
->w
;
2572 ctx
->pipe
->next
= new_p
;
2575 done_command(ctx
); /* set up new pipe to accept commands */
2580 /* peek ahead in the in_str to find out if we have a "&n" construct,
2581 * as in "2>&1", that represents duplicating a file descriptor.
2582 * returns either -2 (syntax error), -1 (no &), or the number found.
2584 static int redirect_dup_num(struct in_str
*input
)
2588 if (ch
!= '&') return -1;
2590 b_getch(input
); /* get the & */
2594 return -3; /* "-" represents "close me" */
2596 while (isdigit(ch
)) {
2604 error_msg("ambiguous redirect");
2608 /* If a redirect is immediately preceded by a number, that number is
2609 * supposed to tell which file descriptor to redirect. This routine
2610 * looks for such preceding numbers. In an ideal world this routine
2611 * needs to handle all the following classes of redirects...
2612 * echo 2>foo # redirects fd 2 to file "foo", nothing passed to echo
2613 * echo 49>foo # redirects fd 49 to file "foo", nothing passed to echo
2614 * echo -2>foo # redirects fd 1 to file "foo", "-2" passed to echo
2615 * echo 49x>foo # redirects fd 1 to file "foo", "49x" passed to echo
2616 * A -1 output from this program means no valid number was found, so the
2617 * caller should use the appropriate default for this redirection.
2619 static int redirect_opt_num(o_string
*o
)
2623 if (o
->length
==0) return -1;
2624 for(num
=0; num
<o
->length
; num
++) {
2625 if (!isdigit(*(o
->data
+num
))) {
2629 /* reuse num (and save an int) */
2635 FILE *generate_stream_from_list(struct pipe
*head
)
2639 int pid
, channel
[2];
2640 if (pipe(channel
)<0) perror_msg_and_die("pipe");
2643 perror_msg_and_die("fork");
2644 } else if (pid
==0) {
2646 if (channel
[1] != 1) {
2651 #define SURROGATE "surrogate response"
2652 write(1,SURROGATE
,sizeof(SURROGATE
));
2653 _exit(run_list(head
));
2655 _exit(run_list_real(head
)); /* leaks memory */
2658 debug_printf("forked child %d\n",pid
);
2660 pf
= fdopen(channel
[0],"r");
2661 debug_printf("pipe on FILE *%p\n",pf
);
2663 free_pipe_list(head
,0);
2664 pf
=popen("echo surrogate response","r");
2665 debug_printf("started fake pipe on FILE *%p\n",pf
);
2670 /* this version hacked for testing purposes */
2671 /* return code is exit status of the process that is run. */
2672 static int process_command_subs(o_string
*dest
, struct p_context
*ctx
, struct in_str
*input
, int subst_end
)
2675 o_string result
=NULL_O_STRING
;
2676 struct p_context inner
;
2678 struct in_str pipe_str
;
2679 initialize_context(&inner
);
2681 /* recursion to generate command */
2682 retcode
= parse_stream(&result
, &inner
, input
, subst_end
);
2683 if (retcode
!= 0) return retcode
; /* syntax error or EOF */
2684 done_word(&result
, &inner
);
2685 done_pipe(&inner
, PIPE_SEQ
);
2688 p
=generate_stream_from_list(inner
.list_head
);
2689 if (p
==NULL
) return 1;
2690 mark_open(fileno(p
));
2691 setup_file_in_str(&pipe_str
, p
);
2693 /* now send results of command back into original context */
2694 retcode
= parse_stream(dest
, ctx
, &pipe_str
, '\0');
2695 /* XXX In case of a syntax error, should we try to kill the child?
2696 * That would be tough to do right, so just read until EOF. */
2698 while (b_getch(&pipe_str
)!=EOF
) { /* discard */ };
2701 debug_printf("done reading from pipe, pclose()ing\n");
2702 /* This is the step that wait()s for the child. Should be pretty
2703 * safe, since we just read an EOF from its stdout. We could try
2704 * to better, by using wait(), and keeping track of background jobs
2705 * at the same time. That would be a lot of work, and contrary
2706 * to the KISS philosophy of this program. */
2707 mark_closed(fileno(p
));
2709 free_pipe_list(inner
.list_head
,0);
2710 debug_printf("pclosed, retcode=%d\n",retcode
);
2711 /* XXX this process fails to trim a single trailing newline */
2715 static int parse_group(o_string
*dest
, struct p_context
*ctx
,
2716 struct in_str
*input
, int ch
)
2719 struct p_context sub
;
2720 struct child_prog
*child
= ctx
->child
;
2723 return 1; /* syntax error, groups and arglists don't mix */
2725 initialize_context(&sub
);
2727 case '(': endch
=')'; child
->subshell
=1; break;
2728 case '{': endch
='}'; break;
2729 default: syntax(); /* really logic error */
2731 rcode
=parse_stream(dest
,&sub
,input
,endch
);
2732 done_word(dest
,&sub
); /* finish off the final word in the subcontext */
2733 done_pipe(&sub
, PIPE_SEQ
); /* and the final command there, too */
2734 child
->group
= sub
.list_head
;
2736 /* child remains "open", available for possible redirects */
2740 /* basically useful version until someone wants to get fancier,
2741 * see the bash man page under "Parameter Expansion" */
2742 static char *lookup_param(char *src
)
2746 char *default_val
= NULL
;
2748 int expand_empty
= 0;
2753 sep
= strchr(src
, ':');
2757 if (*(sep
+ 1) == '-')
2758 default_val
= sep
+2;
2759 if (*(sep
+ 1) == '=') {
2760 default_val
= sep
+2;
2763 if (*(sep
+ 1) == '+') {
2764 default_val
= sep
+2;
2771 p
= get_local_var(src
);
2773 if (!p
|| strlen(p
) == 0) {
2776 char *var
= malloc(strlen(src
)+strlen(default_val
)+2);
2778 sprintf(var
, "%s=%s", src
, default_val
);
2779 set_local_var(var
, 0);
2783 } else if (expand_empty
) {
2794 static char *get_dollar_var(char ch
)
2796 static char buf
[40];
2801 sprintf(buf
, "%u", (unsigned int)last_return_code
);
2810 /* return code: 0 for OK, 1 for syntax error */
2811 static int handle_dollar(o_string
*dest
, struct p_context
*ctx
, struct in_str
*input
)
2821 int ch
= input
->peek(input
); /* first character after the $ */
2822 debug_printf("handle_dollar: ch=%c\n",ch
);
2824 b_addchr(dest
, SPECIAL_VAR_SYMBOL
);
2826 while(ch
=b_peek(input
),isalnum(ch
) || ch
=='_') {
2830 b_addchr(dest
, SPECIAL_VAR_SYMBOL
);
2832 } else if (isdigit(ch
)) {
2833 i
= ch
-'0'; /* XXX is $0 special? */
2834 if (i
<global_argc
) {
2835 parse_string(dest
, ctx
, global_argv
[i
]); /* recursion */
2839 } else switch (ch
) {
2842 b_adduint(dest
,getpid());
2846 if (last_bg_pid
> 0) b_adduint(dest
, last_bg_pid
);
2852 b_adduint(dest
,last_return_code
);
2855 b_addchr(dest
, SPECIAL_VAR_SYMBOL
);
2856 b_addchr(dest
, '$');
2857 b_addchr(dest
, '?');
2858 b_addchr(dest
, SPECIAL_VAR_SYMBOL
);
2864 b_adduint(dest
,global_argc
? global_argc
-1 : 0);
2869 b_addchr(dest
, SPECIAL_VAR_SYMBOL
);
2872 /* XXX maybe someone will try to escape the '}' */
2873 while(ch
=b_getch(input
),ch
!=EOF
&& ch
!='}') {
2880 b_addchr(dest
, SPECIAL_VAR_SYMBOL
);
2885 process_command_subs(dest
, ctx
, input
, ')');
2889 for (i
=1; i
<global_argc
; i
++) {
2890 parse_string(dest
, ctx
, global_argv
[i
]);
2891 if (i
+1 < global_argc
) parse_string(dest
, ctx
, sep
);
2897 /* still unhandled, but should be eventually */
2898 error_msg("unhandled syntax: $%c",ch
);
2903 b_addqchr(dest
,'$',dest
->quote
);
2905 /* Eat the character if the flag was set. If the compiler
2906 * is smart enough, we could substitute "b_getch(input);"
2907 * for all the "advance = 1;" above, and also end up with
2908 * a nice size-optimized program. Hah! That'll be the day.
2910 if (advance
) b_getch(input
);
2915 int parse_string(o_string
*dest
, struct p_context
*ctx
, const char *src
)
2918 setup_string_in_str(&foo
, src
);
2919 return parse_stream(dest
, ctx
, &foo
, '\0');
2923 /* return code is 0 for normal exit, 1 for syntax error */
2924 static int parse_stream(o_string
*dest
, struct p_context
*ctx
,
2925 struct in_str
*input
, int end_trigger
)
2930 redir_type redir_style
;
2934 /* Only double-quote state is handled in the state variable dest->quote.
2935 * A single-quote triggers a bypass of the main loop until its mate is
2936 * found. When recursing, quote state is passed in via dest->quote. */
2938 debug_printf("parse_stream, end_trigger=%d\n",end_trigger
);
2939 while ((ch
=b_getch(input
))!=EOF
) {
2942 if (input
->__promptme
== 0) return 1;
2944 next
= (ch
== '\n') ? 0 : b_peek(input
);
2946 debug_printf("parse_stream: ch=%c (%d) m=%d quote=%d - %c\n",
2947 ch
>= ' ' ? ch
: '.', ch
, m
,
2948 dest
->quote
, ctx
->stack
== NULL
? '*' : '.');
2950 if (m
==0 || ((m
==1 || m
==2) && dest
->quote
)) {
2951 b_addqchr(dest
, ch
, dest
->quote
);
2953 if (m
==2) { /* unquoted IFS */
2954 if (done_word(dest
, ctx
)) {
2957 /* If we aren't performing a substitution, treat a newline as a
2958 * command separator. */
2959 if (end_trigger
!= '\0' && ch
=='\n')
2960 done_pipe(ctx
,PIPE_SEQ
);
2962 if (ch
== end_trigger
&& !dest
->quote
&& ctx
->w
==RES_NONE
) {
2963 debug_printf("leaving parse_stream (triggered)\n");
2968 /* Yahoo! Time to run with it! */
2969 done_pipe(ctx
,PIPE_SEQ
);
2970 run_list(ctx
->list_head
);
2971 initialize_context(ctx
);
2974 if (m
!=2) switch (ch
) {
2976 if (dest
->length
== 0 && !dest
->quote
) {
2977 while(ch
=b_peek(input
),ch
!=EOF
&& ch
!='\n') { b_getch(input
); }
2979 b_addqchr(dest
, ch
, dest
->quote
);
2987 b_addqchr(dest
, '\\', dest
->quote
);
2988 b_addqchr(dest
, b_getch(input
), dest
->quote
);
2991 if (handle_dollar(dest
, ctx
, input
)!=0) return 1;
2995 while(ch
=b_getch(input
),ch
!=EOF
&& ch
!='\'') {
2997 if(input
->__promptme
== 0) return 1;
3008 dest
->quote
= !dest
->quote
;
3012 process_command_subs(dest
, ctx
, input
, '`');
3015 redir_fd
= redirect_opt_num(dest
);
3016 done_word(dest
, ctx
);
3017 redir_style
=REDIRECT_OVERWRITE
;
3019 redir_style
=REDIRECT_APPEND
;
3021 } else if (next
== '(') {
3022 syntax(); /* until we support >(list) Process Substitution */
3025 setup_redirect(ctx
, redir_fd
, redir_style
, input
);
3028 redir_fd
= redirect_opt_num(dest
);
3029 done_word(dest
, ctx
);
3030 redir_style
=REDIRECT_INPUT
;
3032 redir_style
=REDIRECT_HEREIS
;
3034 } else if (next
== '>') {
3035 redir_style
=REDIRECT_IO
;
3037 } else if (next
== '(') {
3038 syntax(); /* until we support <(list) Process Substitution */
3041 setup_redirect(ctx
, redir_fd
, redir_style
, input
);
3045 done_word(dest
, ctx
);
3046 done_pipe(ctx
,PIPE_SEQ
);
3049 done_word(dest
, ctx
);
3052 done_pipe(ctx
,PIPE_AND
);
3055 done_pipe(ctx
,PIPE_BG
);
3063 done_word(dest
, ctx
);
3066 done_pipe(ctx
,PIPE_OR
);
3068 /* we could pick up a file descriptor choice here
3069 * with redirect_opt_num(), but bash doesn't do it.
3070 * "echo foo 2| cat" yields "foo 2". */
3082 if (parse_group(dest
, ctx
, input
, ch
)!=0) return 1;
3086 syntax(); /* Proper use of this character caught by end_trigger */
3090 case SUBSTED_VAR_SYMBOL
:
3092 while (ch
= b_getch(input
), ch
!= EOF
&&
3093 ch
!= SUBSTED_VAR_SYMBOL
) {
3094 debug_printf("subst, pass=%d\n", ch
);
3095 if (input
->__promptme
== 0)
3099 debug_printf("subst, term=%d\n", ch
);
3106 syntax(); /* this is really an internal logic error */
3111 /* complain if quote? No, maybe we just finished a command substitution
3112 * that was quoted. Example:
3113 * $ echo "`cat foo` plus more"
3114 * and we just got the EOF generated by the subshell that ran "cat foo"
3115 * The only real complaint is if we got an EOF when end_trigger != '\0',
3116 * that is, we were really supposed to get end_trigger, and never got
3117 * one before the EOF. Can't use the standard "syntax error" return code,
3118 * so that parse_stream_outer can distinguish the EOF and exit smoothly. */
3119 debug_printf("leaving parse_stream (EOF)\n");
3120 if (end_trigger
!= '\0') return -1;
3124 static void mapset(const unsigned char *set
, int code
)
3126 const unsigned char *s
;
3127 for (s
=set
; *s
; s
++) map
[*s
] = code
;
3130 static void update_ifs_map(void)
3132 /* char *ifs and char map[256] are both globals. */
3133 ifs
= (uchar
*)getenv("IFS");
3134 if (ifs
== NULL
) ifs
=(uchar
*)" \t\n";
3135 /* Precompute a list of 'flow through' behavior so it can be treated
3136 * quickly up front. Computation is necessary because of IFS.
3137 * Special case handling of IFS == " \t\n" is not implemented.
3138 * The map[] array only really needs two bits each, and on most machines
3139 * that would be faster because of the reduced L1 cache footprint.
3141 memset(map
,0,sizeof(map
)); /* most characters flow through always */
3143 mapset((uchar
*)"\\$'\"`", 3); /* never flow through */
3144 mapset((uchar
*)"<>;&|(){}#", 1); /* flow through if quoted */
3147 uchar subst
[2] = {SUBSTED_VAR_SYMBOL
, 0};
3148 mapset(subst
, 3); /* never flow through */
3150 mapset((uchar
*)"\\$'\"", 3); /* never flow through */
3151 mapset((uchar
*)";&|#", 1); /* flow through if quoted */
3153 mapset(ifs
, 2); /* also flow through if quoted */
3156 /* most recursion does not come through here, the exeception is
3157 * from builtin_source() */
3158 static int parse_stream_outer(struct in_str
*inp
, int flag
)
3161 struct p_context ctx
;
3162 o_string temp
=NULL_O_STRING
;
3169 initialize_context(&ctx
);
3171 if (!(flag
& FLAG_PARSE_SEMICOLON
) || (flag
& FLAG_REPARSING
)) mapset((uchar
*)";$&|", 0);
3173 rcode
= parse_stream(&temp
, &ctx
, inp
,
3174 flag
& FLAG_CONT_ON_NEWLINE
? -1 : '\n');
3176 if (rcode
== 1) flag_repeat
= 0;
3178 if (rcode
!= 1 && ctx
.old_flag
!= 0) {
3184 if (rcode
!= 1 && ctx
.old_flag
== 0) {
3185 done_word(&temp
, &ctx
);
3186 done_pipe(&ctx
,PIPE_SEQ
);
3188 run_list(ctx
.list_head
);
3190 code
= run_list(ctx
.list_head
);
3191 if (code
== -2) { /* exit */
3194 /* XXX hackish way to not allow exit from main loop */
3195 if (inp
->peek
== file_peek
) {
3196 printf("exit not allowed from main input shell.\n");
3205 if (ctx
.old_flag
!= 0) {
3210 if (inp
->__promptme
== 0) printf("<INTERRUPT>\n");
3211 inp
->__promptme
= 1;
3216 free_pipe_list(ctx
.list_head
,0);
3219 /* loop on syntax errors, return on EOF */
3220 } while (rcode
!= -1 && !(flag
& FLAG_EXIT_FROM_LOOP
) &&
3221 (inp
->peek
!= static_peek
|| b_peek(inp
)));
3225 return (code
!= 0) ? 1 : 0;
3226 #endif /* __U_BOOT__ */
3230 static int parse_string_outer(const char *s
, int flag
)
3232 int parse_string_outer(const char *s
, int flag
)
3233 #endif /* __U_BOOT__ */
3235 struct in_str input
;
3241 if (!(p
= strchr(s
, '\n')) || *++p
) {
3242 p
= xmalloc(strlen(s
) + 2);
3245 setup_string_in_str(&input
, p
);
3246 rcode
= parse_stream_outer(&input
, flag
);
3251 setup_string_in_str(&input
, s
);
3252 return parse_stream_outer(&input
, flag
);
3259 static int parse_file_outer(FILE *f
)
3261 int parse_file_outer(void)
3265 struct in_str input
;
3267 setup_file_in_str(&input
, f
);
3269 setup_file_in_str(&input
);
3271 rcode
= parse_stream_outer(&input
, FLAG_PARSE_SEMICOLON
);
3276 #ifdef CONFIG_NEEDS_MANUAL_RELOC
3277 static void u_boot_hush_reloc(void)
3280 struct reserved_combo
*r
;
3282 for (r
=reserved_list
; r
<reserved_list
+NRES
; r
++) {
3283 addr
= (ulong
) (r
->literal
) + gd
->reloc_off
;
3284 r
->literal
= (char *)addr
;
3289 int u_boot_hush_start(void)
3291 if (top_vars
== NULL
) {
3292 top_vars
= malloc(sizeof(struct variables
));
3293 top_vars
->name
= "HUSH_VERSION";
3294 top_vars
->value
= "0.01";
3295 top_vars
->next
= NULL
;
3296 top_vars
->flg_export
= 0;
3297 top_vars
->flg_read_only
= 1;
3298 #ifdef CONFIG_NEEDS_MANUAL_RELOC
3299 u_boot_hush_reloc();
3305 static void *xmalloc(size_t size
)
3309 if (!(p
= malloc(size
))) {
3310 printf("ERROR : memory not allocated\n");
3316 static void *xrealloc(void *ptr
, size_t size
)
3320 if (!(p
= realloc(ptr
, size
))) {
3321 printf("ERROR : memory not allocated\n");
3326 #endif /* __U_BOOT__ */
3329 /* Make sure we have a controlling tty. If we get started under a job
3330 * aware app (like bash for example), make sure we are now in charge so
3331 * we don't fight over who gets the foreground */
3332 static void setup_job_control(void)
3334 static pid_t shell_pgrp
;
3335 /* Loop until we are in the foreground. */
3336 while (tcgetpgrp (shell_terminal
) != (shell_pgrp
= getpgrp ()))
3337 kill (- shell_pgrp
, SIGTTIN
);
3339 /* Ignore interactive and job-control signals. */
3340 signal(SIGINT
, SIG_IGN
);
3341 signal(SIGQUIT
, SIG_IGN
);
3342 signal(SIGTERM
, SIG_IGN
);
3343 signal(SIGTSTP
, SIG_IGN
);
3344 signal(SIGTTIN
, SIG_IGN
);
3345 signal(SIGTTOU
, SIG_IGN
);
3346 signal(SIGCHLD
, SIG_IGN
);
3348 /* Put ourselves in our own process group. */
3350 shell_pgrp
= getpid ();
3351 setpgid (shell_pgrp
, shell_pgrp
);
3353 /* Grab control of the terminal. */
3354 tcsetpgrp(shell_terminal
, shell_pgrp
);
3357 int hush_main(int argc
, char * const *argv
)
3363 /* XXX what should these be while sourcing /etc/profile? */
3367 /* (re?) initialize globals. Sometimes hush_main() ends up calling
3368 * hush_main(), therefore we cannot rely on the BSS to zero out this
3369 * stuff. Reset these to 0 every time. */
3371 /* map[] is taken care of with call to update_ifs_map() */
3374 close_me_head
= NULL
;
3379 /* Initialize some more globals to non-zero values */
3381 #ifdef CONFIG_FEATURE_COMMAND_EDITING
3382 cmdedit_set_initial_prompt();
3388 /* initialize our shell local variables with the values
3389 * currently living in the environment */
3392 set_local_var(*e
, 2); /* without call putenv() */
3395 last_return_code
=EXIT_SUCCESS
;
3398 if (argv
[0] && argv
[0][0] == '-') {
3399 debug_printf("\nsourcing /etc/profile\n");
3400 if ((input
= fopen("/etc/profile", "r")) != NULL
) {
3401 mark_open(fileno(input
));
3402 parse_file_outer(input
);
3403 mark_closed(fileno(input
));
3409 while ((opt
= getopt(argc
, argv
, "c:xif")) > 0) {
3413 global_argv
= argv
+optind
;
3414 global_argc
= argc
-optind
;
3415 opt
= parse_string_outer(optarg
, FLAG_PARSE_SEMICOLON
);
3427 fprintf(stderr
, "Usage: sh [FILE]...\n"
3428 " or: sh -c command [args]...\n\n");
3435 /* A shell is interactive if the `-i' flag was given, or if all of
3436 * the following conditions are met:
3438 * no arguments remaining or the -s flag given
3439 * standard input is a terminal
3440 * standard output is a terminal
3441 * Refer to Posix.2, the description of the `sh' utility. */
3442 if (argv
[optind
]==NULL
&& input
==stdin
&&
3443 isatty(fileno(stdin
)) && isatty(fileno(stdout
))) {
3447 debug_printf("\ninteractive=%d\n", interactive
);
3449 /* Looks like they want an interactive shell */
3450 #ifndef CONFIG_FEATURE_SH_EXTRA_QUIET
3451 printf( "\n\n" BB_BANNER
" hush - the humble shell v0.01 (testing)\n");
3452 printf( "Enter 'help' for a list of built-in commands.\n\n");
3454 setup_job_control();
3457 if (argv
[optind
]==NULL
) {
3458 opt
=parse_file_outer(stdin
);
3462 debug_printf("\nrunning script '%s'\n", argv
[optind
]);
3463 global_argv
= argv
+optind
;
3464 global_argc
= argc
-optind
;
3465 input
= xfopen(argv
[optind
], "r");
3466 opt
= parse_file_outer(input
);
3468 #ifdef CONFIG_FEATURE_CLEAN_UP
3470 if (cwd
&& cwd
!= unknown
)
3473 struct variables
*cur
, *tmp
;
3474 for(cur
= top_vars
; cur
; cur
= tmp
) {
3476 if (!cur
->flg_read_only
) {
3486 return(opt
?opt
:last_return_code
);
3490 static char *insert_var_value(char *inp
)
3492 return insert_var_value_sub(inp
, 0);
3495 static char *insert_var_value_sub(char *inp
, int tag_subst
)
3497 int res_str_len
= 0;
3500 char *p
, *p1
, *res_str
= NULL
;
3502 while ((p
= strchr(inp
, SPECIAL_VAR_SYMBOL
))) {
3503 /* check the beginning of the string for normal charachters */
3505 /* copy any charachters to the result string */
3507 res_str
= xrealloc(res_str
, (res_str_len
+ len
));
3508 strncpy((res_str
+ res_str_len
), inp
, len
);
3512 /* find the ending marker */
3513 p
= strchr(inp
, SPECIAL_VAR_SYMBOL
);
3515 /* look up the value to substitute */
3516 if ((p1
= lookup_param(inp
))) {
3518 len
= res_str_len
+ strlen(p1
) + 2;
3520 len
= res_str_len
+ strlen(p1
);
3521 res_str
= xrealloc(res_str
, (1 + len
));
3524 * copy the variable value to the result
3527 strcpy((res_str
+ res_str_len
+ 1), p1
);
3530 * mark the replaced text to be accepted as
3533 res_str
[res_str_len
] = SUBSTED_VAR_SYMBOL
;
3534 res_str
[res_str_len
+ 1 + strlen(p1
)] =
3538 * copy the variable value to the result
3541 strcpy((res_str
+ res_str_len
), p1
);
3545 *p
= SPECIAL_VAR_SYMBOL
;
3550 res_str
= xrealloc(res_str
, (1 + res_str_len
+ strlen(inp
)));
3551 strcpy((res_str
+ res_str_len
), inp
);
3552 while ((p
= strchr(res_str
, '\n'))) {
3556 return (res_str
== NULL
) ? inp
: res_str
;
3559 static char **make_list_in(char **inp
, char *name
)
3562 int name_len
= strlen(name
);
3567 /* create list of variable values */
3568 list
= xmalloc(sizeof(*list
));
3569 for (i
= 0; inp
[i
]; i
++) {
3570 p3
= insert_var_value(inp
[i
]);
3577 if ((p2
= strchr(p1
, ' '))) {
3583 /* we use n + 2 in realloc for list,because we add
3584 * new element and then we will add NULL element */
3585 list
= xrealloc(list
, sizeof(*list
) * (n
+ 2));
3586 list
[n
] = xmalloc(2 + name_len
+ len
);
3587 strcpy(list
[n
], name
);
3588 strcat(list
[n
], "=");
3589 strncat(list
[n
], p1
, len
);
3590 list
[n
++][name_len
+ len
+ 1] = '\0';
3593 if (p3
!= inp
[i
]) free(p3
);
3600 * Make new string for parser
3601 * inp - array of argument strings to flatten
3602 * nonnull - indicates argument was quoted when originally parsed
3604 static char *make_string(char **inp
, int *nonnull
)
3613 noeval_str
= get_local_var("HUSH_NO_EVAL");
3614 if (noeval_str
!= NULL
&& *noeval_str
!= '0' && *noeval_str
!= '\0')
3616 for (n
= 0; inp
[n
]; n
++) {
3617 p
= insert_var_value_sub(inp
[n
], noeval
);
3618 str
= xrealloc(str
, (len
+ strlen(p
) + (2 * nonnull
[n
])));
3629 len
= strlen(str
) + 3;
3630 if (p
!= inp
[n
]) free(p
);
3633 *(str
+ len
) = '\n';
3634 *(str
+ len
+ 1) = '\0';
3639 static int do_showvar(cmd_tbl_t
*cmdtp
, int flag
, int argc
,
3640 char * const argv
[])
3644 struct variables
*cur
;
3646 if (argc
== 1) { /* Print all env variables */
3647 for (cur
= top_vars
; cur
; cur
= cur
->next
) {
3648 printf ("%s=%s\n", cur
->name
, cur
->value
);
3650 puts ("\n ** Abort\n");
3656 for (i
= 1; i
< argc
; ++i
) { /* print single env variables */
3657 char *name
= argv
[i
];
3660 for (cur
= top_vars
; cur
; cur
= cur
->next
) {
3661 if(strcmp (cur
->name
, name
) == 0) {
3663 printf ("%s=%s\n", cur
->name
, cur
->value
);
3666 puts ("\n ** Abort\n");
3671 printf ("## Error: \"%s\" not defined\n", name
);
3679 showvar
, CONFIG_SYS_MAXARGS
, 1, do_showvar
,
3680 "print local hushshell variables",
3681 "\n - print values of all hushshell variables\n"
3682 "showvar name ...\n"
3683 " - print value of hushshell variable 'name'"
3687 /****************************************************************************/