2 ###############################################################################
4 # IPFire.org - A linux based firewall #
5 # Copyright (C) 2013 Alexander Marx <amarx@ipfire.org> #
7 # This program is free software: you can redistribute it and/or modify #
8 # it under the terms of the GNU General Public License as published by #
9 # the Free Software Foundation, either version 3 of the License, or #
10 # (at your option) any later version. #
12 # This program is distributed in the hope that it will be useful, #
13 # but WITHOUT ANY WARRANTY; without even the implied warranty of #
14 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the #
15 # GNU General Public License for more details. #
17 # You should have received a copy of the GNU General Public License #
18 # along with this program. If not, see <http://www.gnu.org/licenses/>. #
20 ###############################################################################
24 require '/var/ipfire/general-functions.pl';
25 require "${General::swroot}/lang.pl";
26 require "/usr/lib/firewall/firewall-lib.pl";
28 # Set to one to enable debugging mode.
31 my $IPTABLES = "iptables --wait";
34 my $CHAIN_INPUT = "INPUTFW";
35 my $CHAIN_FORWARD = "FORWARDFW";
36 my $CHAIN_OUTPUT = "OUTGOINGFW";
37 my $CHAIN = $CHAIN_FORWARD;
38 my $CHAIN_NAT_SOURCE = "NAT_SOURCE";
39 my $CHAIN_NAT_DESTINATION = "NAT_DESTINATION";
40 my $CHAIN_MANGLE_NAT_DESTINATION_FIX = "NAT_DESTINATION";
41 my @VALID_CHAINS = ($CHAIN_INPUT, $CHAIN_FORWARD, $CHAIN_OUTPUT);
42 my @ANY_ADDRESSES = ("0.0.0.0/0.0.0.0", "0.0.0.0/0", "0/0");
44 my @PROTOCOLS = ("tcp", "udp", "icmp", "igmp", "ah", "esp", "gre", "ipv6", "ipip");
45 my @PROTOCOLS_WITH_PORTS = ("tcp", "udp");
47 my @VALID_TARGETS = ("ACCEPT", "DROP", "REJECT");
50 my %defaultNetworks=();
54 my %configoutgoingfw=();
59 my $configfwdfw = "${General::swroot}/firewall/config";
60 my $configinput = "${General::swroot}/firewall/input";
61 my $configoutgoing = "${General::swroot}/firewall/outgoing";
62 my $p2pfile = "${General::swroot}/firewall/p2protocols";
63 my $configgrp = "${General::swroot}/fwhosts/customgroups";
64 my $netsettings = "${General::swroot}/ethernet/settings";
66 &General
::readhash
("${General::swroot}/firewall/settings", \
%fwdfwsettings);
67 &General
::readhash
("$netsettings", \
%defaultNetworks);
68 &General
::readhasharray
($configfwdfw, \
%configfwdfw);
69 &General
::readhasharray
($configinput, \
%configinputfw);
70 &General
::readhasharray
($configoutgoing, \
%configoutgoingfw);
71 &General
::readhasharray
($configgrp, \
%customgrp);
72 &General
::get_aliases
(\
%aliases);
74 my @log_limit_options = &make_log_limit_options
();
83 # Reload firewall rules.
86 # Load P2P block rules.
89 # Reload firewall policy.
90 run
("/usr/sbin/firewall-policy");
94 # Executes or prints the given shell command.
103 print_error
("ERROR: $command");
111 print STDERR
"$message\n";
121 printf(" %2d: %s", $i++, $_);
127 run
("$IPTABLES -F $CHAIN_INPUT");
128 run
("$IPTABLES -F $CHAIN_FORWARD");
129 run
("$IPTABLES -F $CHAIN_OUTPUT");
130 run
("$IPTABLES -t nat -F $CHAIN_NAT_SOURCE");
131 run
("$IPTABLES -t nat -F $CHAIN_NAT_DESTINATION");
132 run
("$IPTABLES -t mangle -F $CHAIN_MANGLE_NAT_DESTINATION_FIX");
136 if (! -z
"${General::swroot}/firewall/config"){
137 &buildrules
(\
%configfwdfw);
139 if (! -z
"${General::swroot}/firewall/input"){
140 &buildrules
(\
%configinputfw);
142 if (! -z
"${General::swroot}/firewall/outgoing"){
143 &buildrules
(\
%configoutgoingfw);
150 foreach my $key (sort {$a <=> $b} keys %$hash) {
151 # Skip disabled rules.
152 next unless ($$hash{$key}[2] eq 'ON');
155 print_rule
($$hash{$key});
158 # Check if the target is valid.
159 my $target = $$hash{$key}[0];
160 if (!$target ~~ @VALID_TARGETS) {
161 print_error
("Invalid target '$target' for rule $key");
165 # Check if the chain is valid.
166 my $chain = $$hash{$key}[1];
167 if (!$chain ~~ @VALID_CHAINS) {
168 print_error
("Invalid chain '$chain' in rule $key");
172 # Collect all sources.
173 my @sources = &fwlib
::get_addresses
($hash, $key, "src");
175 # Collect all destinations.
176 my @destinations = &fwlib
::get_addresses
($hash, $key, "tgt");
178 # True if the destination is the firewall itself.
179 my $destination_is_firewall = ($$hash{$key}[5] eq "ipfire");
181 # Check if logging should be enabled.
182 my $LOG = ($$hash{$key}[17] eq 'ON');
184 # Check if NAT is enabled and initialize variables, that we use for that.
185 my $NAT = ($$hash{$key}[28] eq 'ON');
188 $NAT_MODE = uc($$hash{$key}[31]);
191 # Set up time constraints.
192 my @time_options = ();
193 if ($$hash{$key}[18] eq 'ON') {
194 push(@time_options, ("-m", "time"));
196 # Select all days of the week this match is active.
198 if ($$hash{$key}[19] ne '') {
199 push (@weekdays, "Mon");
201 if ($$hash{$key}[20] ne '') {
202 push (@weekdays, "Tue");
204 if ($$hash{$key}[21] ne '') {
205 push (@weekdays, "Wed");
207 if ($$hash{$key}[22] ne '') {
208 push (@weekdays, "Thu");
210 if ($$hash{$key}[23] ne '') {
211 push (@weekdays, "Fri");
213 if ($$hash{$key}[24] ne '') {
214 push (@weekdays, "Sat");
216 if ($$hash{$key}[25] ne '') {
217 push (@weekdays, "Sun");
220 push(@time_options, ("--weekdays", join(",", @weekdays)));
223 # Convert start time.
224 my $time_start = &format_time
($$hash{$key}[26]);
226 push(@time_options, ("--timestart", $time_start));
230 my $time_stop = &format_time
($$hash{$key}[27]);
232 push(@time_options, ("--timestop", $time_stop));
236 # Check which protocols are used in this rule and so that we can
237 # later group rules by protocols.
238 my @protocols = &get_protocols
($hash, $key);
240 print_error
("Invalid protocol configuration for rule $key");
244 foreach my $protocol (@protocols) {
245 # Check if the given protocol is supported.
246 if (($protocol ne "all") && (!$protocol ~~ @PROTOCOLS)) {
247 print_error
("Protocol $protocol is not supported (rule $key)");
251 # Prepare protocol options (like ICMP types, ports, etc...).
252 my @protocol_options = &get_protocol_options
($hash, $key, $protocol, 0);
254 # Check if this protocol knows ports.
255 my $protocol_has_ports = ($protocol ~~ @PROTOCOLS_WITH_PORTS);
257 foreach my $source (@sources) {
258 foreach my $destination (@destinations) {
259 # Skip invalid rules.
260 next if (!$source || !$destination || ($destination eq "none"));
263 if ($source ~~ @ANY_ADDRESSES) {
267 # Sanitize destination.
268 if ($destination ~~ @ANY_ADDRESSES) {
272 # Array with iptables arguments.
276 if ($protocol ne "all") {
277 push(@options, @protocol_options);
280 # Prepare source options.
281 my @source_options = ();
282 if ($source =~ /mac/) {
283 push(@source_options, $source);
285 push(@source_options, ("-s", $source));
288 # Prepare destination options.
289 my @destination_options = ();
291 push(@destination_options, ("-d", $destination));
294 # Add time constraint options.
295 push(@options, @time_options);
297 my $firewall_is_in_source_subnet = 0;
299 $firewall_is_in_source_subnet = &firewall_is_in_subnet
($source);
304 my $nat_address = &fwlib
::get_nat_address
($$hash{$key}[29], $source);
306 # Skip NAT rules if the NAT address is unknown
307 # (i.e. no internet connection has been established, yet).
308 next unless ($nat_address);
311 if ($NAT_MODE eq "DNAT") {
312 # Make port-forwardings useable from the internal networks.
313 my @internal_addresses = &fwlib
::get_internal_firewall_ip_addresses
(1);
314 unless ($nat_address ~~ @internal_addresses) {
315 &add_dnat_mangle_rules
($nat_address, @options);
318 my @nat_options = ();
319 if ($protocol ne "all") {
320 my @nat_protocol_options = &get_protocol_options
($hash, $key, $protocol, 1);
321 push(@nat_options, @nat_protocol_options);
323 push(@nat_options, @source_options);
324 push(@nat_options, ("-d", $nat_address));
327 if ($protocol_has_ports) {
328 $dnat_port = &get_dnat_target_port
($hash, $key);
331 my @nat_action_options = ();
333 # Use iptables REDIRECT
334 my $use_redirect = ($destination_is_firewall && !$destination && $protocol_has_ports && $dnat_port);
336 push(@nat_action_options, ("-j", "REDIRECT", "--to-ports", $dnat_port));
340 if ($destination_is_firewall && !$destination) {
341 $destination = &fwlib
::get_external_address
();
343 next unless ($destination);
345 my ($dnat_address, $dnat_mask) = split("/", $destination);
346 @destination_options = ("-d", $dnat_address);
348 if ($protocol_has_ports) {
349 my $dnat_port = &get_dnat_target_port
($hash, $key);
352 $dnat_address .= ":$dnat_port";
356 push(@nat_action_options, ("-j", "DNAT", "--to-destination", $dnat_address));
360 run
("$IPTABLES -t nat -A $CHAIN_NAT_DESTINATION @nat_options @log_limit_options -j LOG --log-prefix 'DNAT '");
362 run
("$IPTABLES -t nat -A $CHAIN_NAT_DESTINATION @nat_options @nat_action_options");
365 } elsif ($NAT_MODE eq "SNAT") {
366 my @nat_options = @options;
368 push(@nat_options, @source_options);
369 push(@nat_options, @destination_options);
372 run
("$IPTABLES -t nat -A $CHAIN_NAT_SOURCE @nat_options @log_limit_options -j LOG --log-prefix 'SNAT '");
374 run
("$IPTABLES -t nat -A $CHAIN_NAT_SOURCE @nat_options -j SNAT --to-source $nat_address");
378 push(@options, @source_options);
380 if ($firewall_is_in_source_subnet && ($fwdfwsettings{"POLICY"} eq "MODE1") && ($chain eq $CHAIN_FORWARD)) {
382 run
("$IPTABLES -A $CHAIN_INPUT @options @log_limit_options -j LOG --log-prefix '$CHAIN_INPUT '");
384 run
("$IPTABLES -A $CHAIN_INPUT @options -j $target");
387 push(@options, @destination_options);
389 # Insert firewall rule.
391 run
("$IPTABLES -A $chain @options @log_limit_options -j LOG --log-prefix '$chain '");
393 run
("$IPTABLES -A $chain @options -j $target");
400 # Formats the given timestamp into the iptables format which is "hh:mm" UTC.
404 # Convert the given time into minutes.
405 my $minutes = &time_convert_to_minutes
($val);
407 # Move the timestamp into UTC.
408 $minutes += &time_utc_offset
();
410 # Make sure $minutes is between 00:00 and 23:59.
415 if ($minutes > 1440) {
420 return sprintf("%02d:%02d", $minutes / 60, $minutes % 60);
423 # Calculates the offsets in minutes from the local timezone to UTC.
424 sub time_utc_offset
{
425 my @localtime = localtime(time);
426 my @gmtime = gmtime(time);
428 return ($gmtime[2] * 60 + $gmtime[1] % 60) - ($localtime[2] * 60 + $localtime[1] % 60);
431 # Takes a timestamp like "14:00" and converts it into minutes since midnight.
432 sub time_convert_to_minutes
{
433 my ($hrs, $min) = split(":", shift);
435 return ($hrs * 60) + $min;
441 open( FILE
, "< $p2pfile" ) or die "Unable to read $p2pfile";
444 my $CMD = "-m ipp2p";
445 foreach my $p2pentry (sort @p2ps) {
446 my @p2pline = split( /\;/, $p2pentry );
447 if ( $fwdfwsettings{'POLICY'} eq 'MODE1' ) {
449 if ("$p2pline[2]" eq "on") {
450 $P2PSTRING = "$P2PSTRING --$p2pline[1]";
454 if ("$p2pline[2]" eq "off") {
455 $P2PSTRING = "$P2PSTRING --$p2pline[1]";
461 run
("$IPTABLES -A FORWARDFW $CMD $P2PSTRING -j $DO");
469 my $uses_source_ports = ($$hash{$key}[7] eq "ON");
470 my $uses_services = ($$hash{$key}[11] eq "ON");
474 # Rules which don't have source ports or services (like ICMP, ESP, ...).
475 if (!$uses_source_ports && !$uses_services) {
476 push(@protocols, $$hash{$key}[8]);
478 # Rules which either use ports or services.
479 } elsif ($uses_source_ports || $uses_services) {
480 # Check if service group or service
481 if ($$hash{$key}[14] eq 'cust_srv') {
482 push(@protocols, &fwlib
::get_srv_prot
($$hash{$key}[15]));
484 } elsif($$hash{$key}[14] eq 'cust_srvgrp'){
485 my $protos = &fwlib
::get_srvgrp_prot
($$hash{$key}[15]);
486 push(@protocols, split(",", $protos));
489 # Fetch the protocol for this rule.
490 my $protocol = lc($$hash{$key}[8]);
492 # Fetch source and destination ports for this rule.
493 my $source_ports = $$hash{$key}[10];
494 my $destination_ports = $$hash{$key}[15];
496 # Check if ports are set for protocols which do not support ports.
497 if (!($protocol ~~ @PROTOCOLS_WITH_PORTS) && ($source_ports || $destination_ports)) {
498 print_error
("$protocol does not support ports");
502 push(@protocols, $protocol);
506 # Remove all empty elements
507 @protocols = map { $_ ?
$_ : () } @protocols;
509 # If no protocol has been defined, we assume "all".
511 push(@protocols, "all");
514 # Make all protocol names lowercase.
515 @protocols = map { lc } @protocols;
520 sub get_protocol_options
{
523 my $protocol = shift;
524 my $nat_options_wanted = shift;
527 # Nothing to do if no protocol is specified.
528 if ($protocol eq "all") {
531 push(@options, ("-p", $protocol));
534 # Process source ports.
535 my $use_src_ports = ($$hash{$key}[7] eq "ON");
536 my $src_ports = $$hash{$key}[10];
538 if ($use_src_ports && $src_ports) {
539 push(@options, &format_ports
($src_ports, "src"));
542 # Process destination ports.
543 my $use_dst_ports = ($$hash{$key}[11] eq "ON");
544 my $use_dnat = (($$hash{$key}[28] eq "ON") && ($$hash{$key}[31] eq "dnat"));
546 if ($use_dst_ports) {
547 my $dst_ports_mode = $$hash{$key}[14];
548 my $dst_ports = $$hash{$key}[15];
550 if (($dst_ports_mode eq "TGT_PORT") && $dst_ports) {
551 if ($nat_options_wanted && $use_dnat && $$hash{$key}[30]) {
552 $dst_ports = $$hash{$key}[30];
554 push(@options, &format_ports
($dst_ports, "dst"));
556 } elsif ($dst_ports_mode eq "cust_srv") {
557 if ($protocol eq "ICMP") {
558 push(@options, ("--icmp-type", &fwlib
::get_srv_port
($dst_ports, 3, "ICMP")));
560 $dst_ports = &fwlib
::get_srv_port
($dst_ports, 1, uc($protocol));
561 push(@options, &format_ports
($dst_ports, "dst"));
564 } elsif ($dst_ports_mode eq "cust_srvgrp") {
565 push(@options, &fwlib
::get_srvgrp_port
($dst_ports, uc($protocol)));
569 # Check if a single ICMP type is selected.
570 if (!$use_src_ports && !$use_dst_ports && $protocol eq "icmp") {
571 my $icmp_type = $$hash{$key}[9];
573 if (($icmp_type ne "All ICMP-Types") && $icmp_type) {
574 push(@options, ("--icmp-type", $icmp_type));
586 if ($type eq "src") {
588 } elsif ($type eq "dst") {
594 if ($ports =~ /\|/) {
596 push(@options, ("-m", "multiport"));
600 push(@options, ($arg, $ports));
606 sub get_dnat_target_port
{
610 if ($$hash{$key}[14] eq "TGT_PORT") {
611 my $port = $$hash{$key}[15];
612 my $external_port = $$hash{$key}[30];
614 if ($external_port && ($port ne $external_port)) {
615 return $$hash{$key}[15];
620 sub add_dnat_mangle_rules
{
621 my $nat_address = shift;
625 foreach my $zone ("GREEN", "BLUE", "ORANGE") {
628 # Skip rule if not all required information exists.
629 next unless (exists $defaultNetworks{$zone . "_NETADDRESS"});
630 next unless (exists $defaultNetworks{$zone . "_NETMASK"});
632 my @mangle_options = @options;
634 my $netaddress = $defaultNetworks{$zone . "_NETADDRESS"};
635 $netaddress .= "/" . $defaultNetworks{$zone . "_NETMASK"};
637 push(@mangle_options, ("-s", $netaddress, "-d", $nat_address));
638 push(@mangle_options, ("-j", "MARK", "--set-mark", $mark));
640 run
("$IPTABLES -t mangle -A $CHAIN_MANGLE_NAT_DESTINATION_FIX @mangle_options");
644 sub make_log_limit_options
{
645 my @options = ("-m", "limit");
647 # Maybe we should get this from the configuration.
650 # We limit log messages to $limit messages per minute.
651 push(@options, ("--limit", "$limit/min"));
653 # And we allow bursts of 2x $limit.
654 push(@options, ("--limit-burst", $limit * 2));
659 sub firewall_is_in_subnet
{
662 # ORANGE is missing here, because nothing may ever access
663 # the firewall from this network.
664 my $address = &fwlib
::get_internal_firewall_ip_address
($subnet, 0);