configs/at91sam9g20ek_2mmc_nandflash_defconfig

   1 CONFIG_ARM=y
   2 CONFIG_ARCH_AT91=y
   3 CONFIG_TARGET_AT91SAM9260EK=y
   4 CONFIG_SYS_MALLOC_F_LEN=0x2000
   5 CONFIG_DEFAULT_DEVICE_TREE="at91sam9g20ek_2mmc"
   6 CONFIG_DEBUG_UART=y
   7 CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20,AT91SAM9G20EK_2MMC,SYS_USE_NANDFLASH"
   8 CONFIG_ENV_IS_IN_NAND=y
   9 CONFIG_BOOTDELAY=3
  10 # CONFIG_DISPLAY_BOARDINFO is not set
  11 CONFIG_SYS_PROMPT="U-Boot> "
  12 # CONFIG_CMD_BDI is not set
  13 CONFIG_CMD_BOOTZ=y
  14 # CONFIG_CMD_IMI is not set
  15 # CONFIG_CMD_IMLS is not set
  16 # CONFIG_CMD_LOADS is not set
  17 CONFIG_CMD_MMC=y
  18 CONFIG_CMD_NAND=y
  19 CONFIG_CMD_SF=y
  20 CONFIG_CMD_USB=y
  21 # CONFIG_CMD_FPGA is not set
  22 # CONFIG_CMD_SOURCE is not set
  23 # CONFIG_CMD_SETEXPR is not set
  24 CONFIG_CMD_DHCP=y
  25 CONFIG_CMD_PING=y
  26 CONFIG_CMD_FAT=y
  27 CONFIG_OF_CONTROL=y
  28 CONFIG_DM=y
  29 CONFIG_CLK=y
  30 CONFIG_CLK_AT91=y
  31 CONFIG_DM_GPIO=y
  32 CONFIG_AT91_GPIO=y
  33 CONFIG_DM_MMC=y
  34 CONFIG_GENERIC_ATMEL_MCI=y
  35 CONFIG_DM_SPI_FLASH=y
  36 CONFIG_SPI_FLASH=y
  37 CONFIG_SPI_FLASH_ATMEL=y
  38 CONFIG_SPI_FLASH_DATAFLASH=y
  39 CONFIG_DM_ETH=y
  40 CONFIG_MACB=y
  41 CONFIG_PINCTRL=y
  42 CONFIG_PINCTRL_AT91=y
  43 CONFIG_DM_SERIAL=y
  44 CONFIG_DEBUG_UART_ATMEL=y
  45 CONFIG_DEBUG_UART_BASE=0xfffff200
  46 CONFIG_DEBUG_UART_CLOCK=132000000
  47 CONFIG_DEBUG_UART_BOARD_INIT=y
  48 CONFIG_DEBUG_UART_ANNOUNCE=y
  49 CONFIG_ATMEL_USART=y
  50 CONFIG_DM_SPI=y
  51 CONFIG_ATMEL_SPI=y
  52 CONFIG_USB=y
  53 CONFIG_DM_USB=y
  54 CONFIG_USB_STORAGE=y