]> git.ipfire.org Git - people/ms/u-boot.git/blob - configs/at91sam9x5ek_spiflash_defconfig
armv8: layerscape: Enable falcon boot
[people/ms/u-boot.git] / configs / at91sam9x5ek_spiflash_defconfig
1 CONFIG_ARM=y
2 CONFIG_ARCH_AT91=y
3 CONFIG_TARGET_AT91SAM9X5EK=y
4 CONFIG_SYS_MALLOC_F_LEN=0x2000
5 CONFIG_DEFAULT_DEVICE_TREE="at91sam9g35ek"
6 CONFIG_DEBUG_UART=y
7 CONFIG_SPI_BOOT=y
8 CONFIG_BOOTDELAY=3
9 CONFIG_USE_BOOTARGS=y
10 CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,256k(env),256k(env_redundant),256k(spare),512k(dtb),6M(kernel)ro,-(rootfs) rootfstype=ubifs ubi.mtd=7 root=ubi0:rootfs rw"
11 # CONFIG_CONSOLE_MUX is not set
12 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
13 # CONFIG_DISPLAY_BOARDINFO is not set
14 CONFIG_HUSH_PARSER=y
15 CONFIG_SYS_PROMPT="U-Boot> "
16 CONFIG_CMD_BOOTZ=y
17 # CONFIG_CMD_IMI is not set
18 # CONFIG_CMD_IMLS is not set
19 # CONFIG_CMD_FLASH is not set
20 # CONFIG_CMD_FPGA is not set
21 CONFIG_CMD_MMC=y
22 CONFIG_CMD_NAND=y
23 CONFIG_CMD_NAND_TRIMFFS=y
24 CONFIG_CMD_SF=y
25 CONFIG_CMD_USB=y
26 # CONFIG_CMD_SETEXPR is not set
27 CONFIG_CMD_DHCP=y
28 CONFIG_CMD_PING=y
29 CONFIG_CMD_FAT=y
30 CONFIG_CMD_UBI=y
31 CONFIG_OF_CONTROL=y
32 CONFIG_ENV_IS_IN_SPI_FLASH=y
33 CONFIG_DM=y
34 CONFIG_CLK=y
35 CONFIG_CLK_AT91=y
36 CONFIG_AT91_UTMI=y
37 CONFIG_DM_GPIO=y
38 CONFIG_AT91_GPIO=y
39 CONFIG_DM_MMC=y
40 CONFIG_GENERIC_ATMEL_MCI=y
41 CONFIG_DM_SPI_FLASH=y
42 CONFIG_SPI_FLASH=y
43 CONFIG_SPI_FLASH_ATMEL=y
44 CONFIG_DM_ETH=y
45 CONFIG_MACB=y
46 CONFIG_PINCTRL=y
47 CONFIG_PINCTRL_AT91=y
48 CONFIG_DM_SERIAL=y
49 CONFIG_DEBUG_UART_ATMEL=y
50 CONFIG_DEBUG_UART_BASE=0xfffff200
51 CONFIG_DEBUG_UART_CLOCK=132000000
52 CONFIG_DEBUG_UART_BOARD_INIT=y
53 CONFIG_DEBUG_UART_ANNOUNCE=y
54 CONFIG_ATMEL_USART=y
55 CONFIG_DM_SPI=y
56 CONFIG_ATMEL_SPI=y
57 CONFIG_TIMER=y
58 CONFIG_ATMEL_PIT_TIMER=y
59 CONFIG_USB=y
60 CONFIG_DM_USB=y
61 CONFIG_USB_EHCI_HCD=y
62 CONFIG_USB_STORAGE=y
63 CONFIG_LCD=y