configs/usbarmory_defconfig

   1 CONFIG_ARM=y
   2 CONFIG_ARCH_MX5=y
   3 CONFIG_TEXT_BASE=0x77800000
   4 CONFIG_SYS_MALLOC_LEN=0xa00000
   5 CONFIG_NR_DRAM_BANKS=1
   6 CONFIG_ENV_SIZE=0x2000
   7 CONFIG_ENV_OFFSET=0x60000
   8 CONFIG_TARGET_USBARMORY=y
   9 CONFIG_DM_GPIO=y
  10 CONFIG_DEFAULT_DEVICE_TREE="imx53-usbarmory"
  11 # CONFIG_CMD_BMODE is not set
  12 CONFIG_SYS_LOAD_ADDR=0x72000000
  13 CONFIG_SYS_MEMTEST_START=0x70000000
  14 CONFIG_SYS_MEMTEST_END=0x90000000
  15 CONFIG_DISTRO_DEFAULTS=y
  16 CONFIG_BOOTCOMMAND="run distro_bootcmd; setenv bootargs console=${console} ${bootargs_default}; ext2load mmc 0:1 ${kernel_addr_r} /boot/zImage; ext2load mmc 0:1 ${fdt_addr_r} /boot/${fdtfile}; bootz ${kernel_addr_r} - ${fdt_addr_r}"
  17 CONFIG_SYS_PBSIZE=532
  18 CONFIG_CMD_MEMTEST=y
  19 CONFIG_CMD_FUSE=y
  20 CONFIG_CMD_I2C=y
  21 CONFIG_CMD_MMC=y
  22 # CONFIG_CMD_PINMUX is not set
  23 CONFIG_CMD_USB=y
  24 # CONFIG_CMD_SETEXPR is not set
  25 CONFIG_OF_CONTROL=y
  26 CONFIG_ENV_IS_IN_MMC=y
  27 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
  28 CONFIG_USE_HOSTNAME=y
  29 CONFIG_HOSTNAME="usbarmory"
  30 CONFIG_DM_I2C=y
  31 CONFIG_SYS_I2C_MXC=y
  32 CONFIG_FSL_IIM=y
  33 CONFIG_FSL_ESDHC_IMX=y
  34 CONFIG_MTD=y
  35 CONFIG_PINCTRL=y
  36 CONFIG_PINCTRL_IMX5=y
  37 CONFIG_DM_REGULATOR=y
  38 CONFIG_DM_REGULATOR_FIXED=y
  39 CONFIG_DM_REGULATOR_GPIO=y
  40 CONFIG_DM_SERIAL=y
  41 CONFIG_MXC_UART=y
  42 CONFIG_USB=y
  43 CONFIG_USB_EHCI_MX5=y