cpu/mpc824x/start.S

   1 /*
   2  *  Copyright (C) 1998  Dan Malek <dmalek@jlc.net>
   3  *  Copyright (C) 1999  Magnus Damm <kieraypc01.p.y.kie.era.ericsson.se>
   4  *  Copyright (C) 2000,2001,2002 Wolfgang Denk <wd@denx.de>
   5  *
   6  * See file CREDITS for list of people who contributed to this
   7  * project.
   8  *
   9  * This program is free software; you can redistribute it and/or
  10  * modify it under the terms of the GNU General Public License as
  11  * published by the Free Software Foundation; either version 2 of
  12  * the License, or (at your option) any later version.
  13  *
  14  * This program is distributed in the hope that it will be useful,
  15  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  16  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  17  * GNU General Public License for more details.
  18  *
  19  * You should have received a copy of the GNU General Public License
  20  * along with this program; if not, write to the Free Software
  21  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  22  * MA 02111-1307 USA
  23  */
  24
  25 /* U-Boot - Startup Code for PowerPC based Embedded Boards
  26  *
  27  *
  28  * The processor starts at 0x00000100 and the code is executed
  29  * from flash. The code is organized to be at an other address
  30  * in memory, but as long we don't jump around before relocating.
  31  * board_init lies at a quite high address and when the cpu has
  32  * jumped there, everything is ok.
  33  * This works because the cpu gives the FLASH (CS0) the whole
  34  * address space at startup, and board_init lies as a echo of
  35  * the flash somewhere up there in the memorymap.
  36  *
  37  * board_init will change CS0 to be positioned at the correct
  38  * address and (s)dram will be positioned at address 0
  39  */
  40 #include <config.h>
  41 #include <mpc824x.h>
  42 #include <version.h>
  43
  44 #define _LINUX_CONFIG_H 1       /* avoid reading Linux autoconf.h file  */
  45
  46 #include <ppc_asm.tmpl>
  47 #include <ppc_defs.h>
  48
  49 #include <asm/cache.h>
  50 #include <asm/mmu.h>
  51
  52 #ifndef CONFIG_IDENT_STRING
  53 #define CONFIG_IDENT_STRING ""
  54 #endif
  55
  56 /* We don't want the MMU yet.
  57 */
  58 #undef  MSR_KERNEL
  59 /* FP, Machine Check and Recoverable Interr. */
  60 #define MSR_KERNEL ( MSR_FP | MSR_ME | MSR_RI )
  61
  62 /*
  63  * Set up GOT: Global Offset Table
  64  *
  65  * Use r14 to access the GOT
  66  */
  67         START_GOT
  68         GOT_ENTRY(_GOT2_TABLE_)
  69         GOT_ENTRY(_FIXUP_TABLE_)
  70
  71         GOT_ENTRY(_start)
  72         GOT_ENTRY(_start_of_vectors)
  73         GOT_ENTRY(_end_of_vectors)
  74         GOT_ENTRY(transfer_to_handler)
  75
  76         GOT_ENTRY(_end)
  77         GOT_ENTRY(.bss)
  78 #if defined(CONFIG_FADS)
  79         GOT_ENTRY(environment)
  80 #endif
  81         END_GOT
  82
  83 /*
  84  * r3 - 1st arg to board_init(): IMMP pointer
  85  * r4 - 2nd arg to board_init(): boot flag
  86  */
  87         .text
  88         .long   0x27051956              /* U-Boot Magic Number                  */
  89         .globl  version_string
  90 version_string:
  91         .ascii U_BOOT_VERSION
  92         .ascii " (", __DATE__, " - ", __TIME__, ")"
  93         .ascii CONFIG_IDENT_STRING, "\0"
  94
  95         . = EXC_OFF_SYS_RESET
  96         .globl  _start
  97 _start:
  98         li      r21, BOOTFLAG_COLD      /* Normal Power-On: Boot from FLASH     */
  99         b       boot_cold
 100
 101         . = EXC_OFF_SYS_RESET + 0x10
 102
 103         .globl  _start_warm
 104 _start_warm:
 105         li      r21, BOOTFLAG_WARM      /* Software reboot                      */
 106         b       boot_warm
 107
 108 boot_cold:
 109 boot_warm:
 110
 111         /* Initialize machine status; enable machine check interrupt            */
 112         /*----------------------------------------------------------------------*/
 113         li      r3, MSR_KERNEL          /* Set FP, ME, RI flags */
 114         mtmsr   r3
 115         mtspr   SRR1, r3                /* Make SRR1 match MSR */
 116
 117         addis   r0,0,0x0000             /* lets make sure that r0 is really 0 */
 118         mtspr   HID0, r0                /* disable I and D caches */
 119
 120         mfspr   r3, ICR                 /* clear Interrupt Cause Register */
 121
 122         mfmsr   r3                      /* turn off address translation */
 123         addis   r4,0,0xffff
 124         ori     r4,r4,0xffcf
 125         and     r3,r3,r4
 126         mtmsr   r3
 127         isync
 128         sync                            /* the MMU should be off... */
 129
 130
 131 in_flash:
 132 #if defined(CONFIG_BMW)
 133         bl early_init_f /* Must be ASM: no stack yet! */
 134 #endif
 135         /*
 136          * Setup BATs - cannot be done in C since we don't have a stack yet
 137          */
 138         bl      setup_bats
 139
 140         /* Enable MMU.
 141          */
 142         mfmsr   r3
 143         ori     r3, r3, (MSR_IR | MSR_DR)
 144         mtmsr   r3
 145 #if !defined(CONFIG_BMW)
 146         /* Enable and invalidate data cache.
 147          */
 148         mfspr   r3, HID0
 149         mr      r2, r3
 150         ori     r3, r3, HID0_DCE | HID0_DCI
 151         ori     r2, r2, HID0_DCE
 152         sync
 153         mtspr   HID0, r3
 154         mtspr   HID0, r2
 155         sync
 156
 157         /* Allocate Initial RAM in data cache.
 158          */
 159         lis     r3, CFG_INIT_RAM_ADDR@h
 160         ori     r3, r3, CFG_INIT_RAM_ADDR@l
 161         li      r2, 128
 162         mtctr   r2
 163 1:
 164         dcbz    r0, r3
 165         addi    r3, r3, 32
 166         bdnz    1b
 167
 168         /* Lock way0 in data cache.
 169          */
 170         mfspr   r3, 1011
 171         lis     r2, 0xffff
 172         ori     r2, r2, 0xff1f
 173         and     r3, r3, r2
 174         ori     r3, r3, 0x0080
 175         sync
 176         mtspr   1011, r3
 177 #endif /* !CONFIG_BMW */
 178         /*
 179          * Thisk the stack pointer *somewhere* sensible. Doesnt
 180          * matter much where as we'll move it when we relocate
 181          */
 182         lis     r1, (CFG_INIT_RAM_ADDR + CFG_GBL_DATA_OFFSET)@h
 183         ori     r1, r1, (CFG_INIT_RAM_ADDR + CFG_GBL_DATA_OFFSET)@l
 184
 185         li      r0, 0                   /* Make room for stack frame header and */
 186         stwu    r0, -4(r1)              /* clear final stack frame so that      */
 187         stwu    r0, -4(r1)              /* stack backtraces terminate cleanly   */
 188
 189         /* let the C-code set up the rest                                       */
 190         /*                                                                      */
 191         /* Be careful to keep code relocatable !                                */
 192         /*----------------------------------------------------------------------*/
 193
 194         GET_GOT                 /* initialize GOT access                        */
 195
 196         /* r3: IMMR */
 197         bl      cpu_init_f      /* run low-level CPU init code     (from Flash) */
 198
 199         mr      r3, r21
 200         /* r3: BOOTFLAG */
 201         bl      board_init_f    /* run 1st part of board init code (from Flash) */
 202
 203
 204
 205         .globl  _start_of_vectors
 206 _start_of_vectors:
 207
 208 /* Machine check */
 209         STD_EXCEPTION(EXC_OFF_MACH_CHCK, MachineCheck, MachineCheckException)
 210
 211 /* Data Storage exception.  "Never" generated on the 860. */
 212         STD_EXCEPTION(EXC_OFF_DATA_STOR, DataStorage, UnknownException)
 213
 214 /* Instruction Storage exception.  "Never" generated on the 860. */
 215         STD_EXCEPTION(EXC_OFF_INS_STOR, InstStorage, UnknownException)
 216
 217 /* External Interrupt exception. */
 218         STD_EXCEPTION(EXC_OFF_EXTERNAL, ExtInterrupt, external_interrupt)
 219
 220 /* Alignment exception. */
 221         . = EXC_OFF_ALIGN
 222 Alignment:
 223         EXCEPTION_PROLOG
 224         mfspr   r4,DAR
 225         stw     r4,_DAR(r21)
 226         mfspr   r5,DSISR
 227         stw     r5,_DSISR(r21)
 228         addi    r3,r1,STACK_FRAME_OVERHEAD
 229         li      r20,MSR_KERNEL
 230         rlwimi  r20,r23,0,16,16         /* copy EE bit from saved MSR */
 231         lwz     r6,GOT(transfer_to_handler)
 232         mtlr    r6
 233         blrl
 234 .L_Alignment:
 235         .long   AlignmentException - _start + EXC_OFF_SYS_RESET
 236         .long   int_return - _start + EXC_OFF_SYS_RESET
 237
 238 /* Program check exception */
 239         . = EXC_OFF_PROGRAM
 240 ProgramCheck:
 241         EXCEPTION_PROLOG
 242         addi    r3,r1,STACK_FRAME_OVERHEAD
 243         li      r20,MSR_KERNEL
 244         rlwimi  r20,r23,0,16,16         /* copy EE bit from saved MSR */
 245         lwz     r6,GOT(transfer_to_handler)
 246         mtlr    r6
 247         blrl
 248 .L_ProgramCheck:
 249         .long   ProgramCheckException - _start + EXC_OFF_SYS_RESET
 250         .long   int_return - _start + EXC_OFF_SYS_RESET
 251
 252         /* No FPU on MPC8xx. This exception is not supposed to happen.
 253         */
 254         STD_EXCEPTION(EXC_OFF_FPUNAVAIL, FPUnavailable, UnknownException)
 255
 256         /* I guess we could implement decrementer, and may have
 257          * to someday for timekeeping.
 258          */
 259         STD_EXCEPTION(EXC_OFF_DECR, Decrementer, timer_interrupt)
 260         STD_EXCEPTION(0xa00, Trap_0a, UnknownException)
 261         STD_EXCEPTION(0xb00, Trap_0b, UnknownException)
 262
 263         . = 0xc00
 264 /*
 265  * r0 - SYSCALL number
 266  * r3-... arguments
 267  */
 268 SystemCall:
 269         addis   r11,r0,0                /* get functions table addr */
 270         ori     r11,r11,0               /* Note: this code is patched in trap_init */
 271         addis   r12,r0,0                /* get number of functions */
 272         ori     r12,r12,0
 273
 274         cmplw   0, r0, r12
 275         bge     1f
 276
 277         rlwinm  r0,r0,2,0,31            /* fn_addr = fn_tbl[r0] */
 278         add     r11,r11,r0
 279         lwz     r11,0(r11)
 280
 281         li      r20,0xd00-4             /* Get stack pointer */
 282         lwz     r12,0(r20)
 283         subi    r12,r12,12              /* Adjust stack pointer */
 284         li      r0,0xc00+_end_back-SystemCall
 285         cmplw   0, r0, r12              /* Check stack overflow */
 286         bgt     1f
 287         stw     r12,0(r20)
 288
 289         mflr    r0
 290         stw     r0,0(r12)
 291         mfspr   r0,SRR0
 292         stw     r0,4(r12)
 293         mfspr   r0,SRR1
 294         stw     r0,8(r12)
 295
 296         li      r12,0xc00+_back-SystemCall
 297         mtlr    r12
 298         mtspr   SRR0,r11
 299
 300 1:      SYNC
 301         rfi
 302
 303 _back:
 304
 305         mfmsr   r11                     /* Disable interrupts */
 306         li      r12,0
 307         ori     r12,r12,MSR_EE
 308         andc    r11,r11,r12
 309         SYNC                            /* Some chip revs need this... */
 310         mtmsr   r11
 311         SYNC
 312
 313         li      r12,0xd00-4             /* restore regs */
 314         lwz     r12,0(r12)
 315
 316         lwz     r11,0(r12)
 317         mtlr    r11
 318         lwz     r11,4(r12)
 319         mtspr   SRR0,r11
 320         lwz     r11,8(r12)
 321         mtspr   SRR1,r11
 322
 323         addi    r12,r12,12              /* Adjust stack pointer */
 324         li      r20,0xd00-4
 325         stw     r12,0(r20)
 326
 327         SYNC
 328         rfi
 329 _end_back:
 330
 331         STD_EXCEPTION(EXC_OFF_TRACE, SingleStep, UnknownException)
 332
 333         STD_EXCEPTION(EXC_OFF_FPUNASSIST, Trap_0e, UnknownException)
 334         STD_EXCEPTION(EXC_OFF_PMI, Trap_0f, UnknownException)
 335
 336         STD_EXCEPTION(EXC_OFF_ITME, InstructionTransMiss, UnknownException)
 337         STD_EXCEPTION(EXC_OFF_DLTME, DataLoadTransMiss, UnknownException)
 338         STD_EXCEPTION(EXC_OFF_DSTME, DataStoreTransMiss, UnknownException)
 339         STD_EXCEPTION(EXC_OFF_IABE, InstructionBreakpoint, DebugException)
 340         STD_EXCEPTION(EXC_OFF_SMIE, SysManageInt, UnknownException)
 341         STD_EXCEPTION(0x1500, Reserved5, UnknownException)
 342         STD_EXCEPTION(0x1600, Reserved6, UnknownException)
 343         STD_EXCEPTION(0x1700, Reserved7, UnknownException)
 344         STD_EXCEPTION(0x1800, Reserved8, UnknownException)
 345         STD_EXCEPTION(0x1900, Reserved9, UnknownException)
 346         STD_EXCEPTION(0x1a00, ReservedA, UnknownException)
 347         STD_EXCEPTION(0x1b00, ReservedB, UnknownException)
 348         STD_EXCEPTION(0x1c00, ReservedC, UnknownException)
 349         STD_EXCEPTION(0x1d00, ReservedD, UnknownException)
 350         STD_EXCEPTION(0x1e00, ReservedE, UnknownException)
 351         STD_EXCEPTION(0x1f00, ReservedF, UnknownException)
 352
 353         STD_EXCEPTION(EXC_OFF_RMTE, RunModeTrace, UnknownException)
 354
 355         .globl  _end_of_vectors
 356 _end_of_vectors:
 357
 358
 359         . = 0x3000
 360
 361 /*
 362  * This code finishes saving the registers to the exception frame
 363  * and jumps to the appropriate handler for the exception.
 364  * Register r21 is pointer into trap frame, r1 has new stack pointer.
 365  */
 366         .globl  transfer_to_handler
 367 transfer_to_handler:
 368         stw     r22,_NIP(r21)
 369         lis     r22,MSR_POW@h
 370         andc    r23,r23,r22
 371         stw     r23,_MSR(r21)
 372         SAVE_GPR(7, r21)
 373         SAVE_4GPRS(8, r21)
 374         SAVE_8GPRS(12, r21)
 375         SAVE_8GPRS(24, r21)
 376 #if 0
 377         andi.   r23,r23,MSR_PR
 378         mfspr   r23,SPRG3               /* if from user, fix up tss.regs */
 379         beq     2f
 380         addi    r24,r1,STACK_FRAME_OVERHEAD
 381         stw     r24,PT_REGS(r23)
 382 2:      addi    r2,r23,-TSS             /* set r2 to current */
 383         tovirt(r2,r2,r23)
 384 #endif
 385         mflr    r23
 386         andi.   r24,r23,0x3f00          /* get vector offset */
 387         stw     r24,TRAP(r21)
 388         li      r22,0
 389         stw     r22,RESULT(r21)
 390         mtspr   SPRG2,r22               /* r1 is now kernel sp */
 391 #if 0
 392         addi    r24,r2,TASK_STRUCT_SIZE /* check for kernel stack overflow */
 393         cmplw   0,r1,r2
 394         cmplw   1,r1,r24
 395         crand   1,1,4
 396         bgt     stack_ovf               /* if r2 < r1 < r2+TASK_STRUCT_SIZE */
 397 #endif
 398         lwz     r24,0(r23)              /* virtual address of handler */
 399         lwz     r23,4(r23)              /* where to go when done */
 400         mtspr   SRR0,r24
 401         ori     r20,r20,0x30            /* enable IR, DR */
 402         mtspr   SRR1,r20
 403         mtlr    r23
 404         SYNC
 405         rfi                             /* jump to handler, enable MMU */
 406
 407 int_return:
 408         mfmsr   r28             /* Disable interrupts */
 409         li      r4,0
 410         ori     r4,r4,MSR_EE
 411         andc    r28,r28,r4
 412         SYNC                    /* Some chip revs need this... */
 413         mtmsr   r28
 414         SYNC
 415         lwz     r2,_CTR(r1)
 416         lwz     r0,_LINK(r1)
 417         mtctr   r2
 418         mtlr    r0
 419         lwz     r2,_XER(r1)
 420         lwz     r0,_CCR(r1)
 421         mtspr   XER,r2
 422         mtcrf   0xFF,r0
 423         REST_10GPRS(3, r1)
 424         REST_10GPRS(13, r1)
 425         REST_8GPRS(23, r1)
 426         REST_GPR(31, r1)
 427         lwz     r2,_NIP(r1)     /* Restore environment */
 428         lwz     r0,_MSR(r1)
 429         mtspr   SRR0,r2
 430         mtspr   SRR1,r0
 431         lwz     r0,GPR0(r1)
 432         lwz     r2,GPR2(r1)
 433         lwz     r1,GPR1(r1)
 434         SYNC
 435         rfi
 436
 437 /* Cache functions.
 438 */
 439         .globl  icache_enable
 440 icache_enable:
 441         mfspr   r5,HID0         /* turn on the I cache. */
 442         ori     r5,r5,0x8800    /* Instruction cache only! */
 443         addis   r6,0,0xFFFF
 444         ori     r6,r6,0xF7FF
 445         and     r6,r5,r6        /* clear the invalidate bit */
 446         sync
 447         mtspr   HID0,r5
 448         mtspr   HID0,r6
 449         isync
 450         sync
 451         blr
 452
 453         .globl  icache_disable
 454 icache_disable:
 455         mfspr   r5,HID0
 456         addis   r6,0,0xFFFF
 457         ori     r6,r6,0x7FFF
 458         and     r5,r5,r6
 459         sync
 460         mtspr   HID0,r5
 461         isync
 462         sync
 463         blr
 464
 465         .globl  icache_status
 466 icache_status:
 467         mfspr   r3, HID0
 468         srwi    r3, r3, 15      /* >>15 & 1=> select bit 16 */
 469         andi.   r3, r3, 1
 470         blr
 471
 472         .globl  dcache_enable
 473 dcache_enable:
 474         mfspr   r5,HID0         /* turn on the D cache. */
 475         ori     r5,r5,0x4400    /* Data cache only! */
 476         mfspr   r4, PVR         /* read PVR */
 477         srawi   r3, r4, 16      /* shift off the least 16 bits */
 478         cmpi    0, 0, r3, 0xC   /* Check for Max pvr */
 479         bne     NotMax
 480         ori     r5,r5,0x0040    /* setting the DCFA bit, for Max rev 1 errata */
 481 NotMax:
 482         addis   r6,0,0xFFFF
 483         ori     r6,r6,0xFBFF
 484         and     r6,r5,r6        /* clear the invalidate bit */
 485         sync
 486         mtspr   HID0,r5
 487         mtspr   HID0,r6
 488         isync
 489         sync
 490         blr
 491
 492         .globl  dcache_disable
 493 dcache_disable:
 494         mfspr   r5,HID0
 495         addis   r6,0,0xFFFF
 496         ori     r6,r6,0xBFFF
 497         and     r5,r5,r6
 498         sync
 499         mtspr   HID0,r5
 500         isync
 501         sync
 502         blr
 503
 504         .globl  dcache_status
 505 dcache_status:
 506         mfspr   r3, HID0
 507         srwi    r3, r3, 14      /* >>14 & 1=> select bit 17 */
 508         andi.   r3, r3, 1
 509         blr
 510
 511         .globl  dc_read
 512 dc_read:
 513 /*TODO : who uses this, what should it do?
 514 */
 515         blr
 516
 517
 518         .globl get_pvr
 519 get_pvr:
 520         mfspr   r3, PVR
 521         blr
 522
 523
 524 /*------------------------------------------------------------------------------*/
 525
 526 /*
 527  * void relocate_code (addr_sp, gd, addr_moni)
 528  *
 529  * This "function" does not return, instead it continues in RAM
 530  * after relocating the monitor code.
 531  *
 532  * r3 = dest
 533  * r4 = src
 534  * r5 = length in bytes
 535  * r6 = cachelinesize
 536  */
 537         .globl  relocate_code
 538 relocate_code:
 539
 540         mr      r1,  r3         /* Set new stack pointer                */
 541         mr      r9,  r4         /* Save copy of Global Data pointer     */
 542         mr      r10, r5         /* Save copy of Destination Address     */
 543
 544         mr      r3,  r5                         /* Destination Address  */
 545 #ifdef DEBUG
 546         lis     r4, CFG_SDRAM_BASE@h            /* Source      Address  */
 547         ori     r4, r4, CFG_SDRAM_BASE@l
 548 #else
 549         lis     r4, CFG_MONITOR_BASE@h          /* Source      Address  */
 550         ori     r4, r4, CFG_MONITOR_BASE@l
 551 #endif
 552         lis     r5, CFG_MONITOR_LEN@h           /* Length in Bytes      */
 553         ori     r5, r5, CFG_MONITOR_LEN@l
 554         li      r6, CFG_CACHELINE_SIZE          /* Cache Line Size      */
 555
 556         /*
 557          * Fix GOT pointer:
 558          *
 559          * New GOT-PTR = (old GOT-PTR - CFG_MONITOR_BASE) + Destination Address
 560          *
 561          * Offset:
 562          */
 563         sub     r15, r10, r4
 564
 565         /* First our own GOT */
 566         add     r14, r14, r15
 567         /* the the one used by the C code */
 568         add     r30, r30, r15
 569
 570         /*
 571          * Now relocate code
 572          */
 573
 574         cmplw   cr1,r3,r4
 575         addi    r0,r5,3
 576         srwi.   r0,r0,2
 577         beq     cr1,4f          /* In place copy is not necessary       */
 578         beq     7f              /* Protect against 0 count              */
 579         mtctr   r0
 580         bge     cr1,2f
 581
 582         la      r8,-4(r4)
 583         la      r7,-4(r3)
 584 1:      lwzu    r0,4(r8)
 585         stwu    r0,4(r7)
 586         bdnz    1b
 587         b       4f
 588
 589 2:      slwi    r0,r0,2
 590         add     r8,r4,r0
 591         add     r7,r3,r0
 592 3:      lwzu    r0,-4(r8)
 593         stwu    r0,-4(r7)
 594         bdnz    3b
 595
 596 /*
 597  * Now flush the cache: note that we must start from a cache aligned
 598  * address. Otherwise we might miss one cache line.
 599  */
 600 4:      cmpwi   r6,0
 601         add     r5,r3,r5
 602         beq     7f              /* Always flush prefetch queue in any case */
 603         subi    r0,r6,1
 604         andc    r3,r3,r0
 605         mr      r4,r3
 606 5:      dcbst   0,r4
 607         add     r4,r4,r6
 608         cmplw   r4,r5
 609         blt     5b
 610         sync                    /* Wait for all dcbst to complete on bus */
 611         mr      r4,r3
 612 6:      icbi    0,r4
 613         add     r4,r4,r6
 614         cmplw   r4,r5
 615         blt     6b
 616 7:      sync                    /* Wait for all icbi to complete on bus */
 617         isync
 618
 619 /*
 620  * We are done. Do not return, instead branch to second part of board
 621  * initialization, now running from RAM.
 622  */
 623
 624         addi    r0, r10, in_ram - _start + EXC_OFF_SYS_RESET
 625         mtlr    r0
 626         blr
 627
 628 in_ram:
 629
 630         /*
 631          * Relocation Function, r14 point to got2+0x8000
 632          *
 633          * Adjust got2 pointers, no need to check for 0, this code
 634          * already puts a few entries in the table.
 635          */
 636         li      r0,__got2_entries@sectoff@l
 637         la      r3,GOT(_GOT2_TABLE_)
 638         lwz     r11,GOT(_GOT2_TABLE_)
 639         mtctr   r0
 640         sub     r11,r3,r11
 641         addi    r3,r3,-4
 642 1:      lwzu    r0,4(r3)
 643         add     r0,r0,r11
 644         stw     r0,0(r3)
 645         bdnz    1b
 646
 647         /*
 648          * Now adjust the fixups and the pointers to the fixups
 649          * in case we need to move ourselves again.
 650          */
 651 2:      li      r0,__fixup_entries@sectoff@l
 652         lwz     r3,GOT(_FIXUP_TABLE_)
 653         cmpwi   r0,0
 654         mtctr   r0
 655         addi    r3,r3,-4
 656         beq     4f
 657 3:      lwzu    r4,4(r3)
 658         lwzux   r0,r4,r11
 659         add     r0,r0,r11
 660         stw     r10,0(r3)
 661         stw     r0,0(r4)
 662         bdnz    3b
 663 4:
 664 clear_bss:
 665         /*
 666          * Now clear BSS segment
 667          */
 668         lwz     r3,GOT(.bss)
 669         lwz     r4,GOT(_end)
 670
 671         cmplw   0, r3, r4
 672         beq     6f
 673
 674         li      r0, 0
 675 5:
 676         stw     r0, 0(r3)
 677         addi    r3, r3, 4
 678         cmplw   0, r3, r4
 679         blt     5b
 680 6:
 681
 682         mr      r3, r9          /* Global Data pointer          */
 683         mr      r4, r10         /* Destination Address          */
 684         bl      board_init_r
 685
 686         /* Problems accessing "end" in C, so do it here */
 687         .globl  get_endaddr
 688 get_endaddr:
 689         lwz     r3,GOT(_end)
 690         blr
 691
 692         /*
 693          * Copy exception vector code to low memory
 694          *
 695          * r3: dest_addr
 696          * r7: source address, r8: end address, r9: target address
 697          */
 698         .globl  trap_init
 699 trap_init:
 700         lwz     r7, GOT(_start)
 701         lwz     r8, GOT(_end_of_vectors)
 702
 703         rlwinm  r9, r7, 0, 18, 31       /* _start & 0x3FFF      */
 704
 705         cmplw   0, r7, r8
 706         bgelr                           /* return if r7>=r8 - just in case */
 707
 708         mflr    r4                      /* save link register           */
 709 1:
 710         lwz     r0, 0(r7)
 711         stw     r0, 0(r9)
 712         addi    r7, r7, 4
 713         addi    r9, r9, 4
 714         cmplw   0, r7, r8
 715         bne     1b
 716
 717         /*
 718          * relocate `hdlr' and `int_return' entries
 719          */
 720         li      r7, .L_MachineCheck - _start + EXC_OFF_SYS_RESET
 721         li      r8, Alignment - _start + EXC_OFF_SYS_RESET
 722 2:
 723         bl      trap_reloc
 724         addi    r7, r7, 0x100           /* next exception vector        */
 725         cmplw   0, r7, r8
 726         blt     2b
 727
 728         li      r7, .L_Alignment - _start + EXC_OFF_SYS_RESET
 729         bl      trap_reloc
 730
 731         li      r7, .L_ProgramCheck - _start + EXC_OFF_SYS_RESET
 732         bl      trap_reloc
 733
 734         li      r7, .L_FPUnavailable - _start + EXC_OFF_SYS_RESET
 735         li      r8, SystemCall - _start + EXC_OFF_SYS_RESET
 736 3:
 737         bl      trap_reloc
 738         addi    r7, r7, 0x100           /* next exception vector        */
 739         cmplw   0, r7, r8
 740         blt     3b
 741
 742         li      r7, .L_SingleStep - _start + EXC_OFF_SYS_RESET
 743         li      r8, _end_of_vectors - _start + EXC_OFF_SYS_RESET
 744 4:
 745         bl      trap_reloc
 746         addi    r7, r7, 0x100           /* next exception vector        */
 747         cmplw   0, r7, r8
 748         blt     4b
 749
 750         mtlr    r4                      /* restore link register        */
 751         blr
 752
 753         /*
 754          * Function: relocate entries for one exception vector
 755          */
 756 trap_reloc:
 757         lwz     r0, 0(r7)               /* hdlr ...                     */
 758         add     r0, r0, r3              /*  ... += dest_addr            */
 759         stw     r0, 0(r7)
 760
 761         lwz     r0, 4(r7)               /* int_return ...               */
 762         add     r0, r0, r3              /*  ... += dest_addr            */
 763         stw     r0, 4(r7)
 764
 765         blr
 766
 767         /* Setup the BAT registers.
 768          */
 769 setup_bats:
 770         lis     r4, CFG_IBAT0L@h
 771         ori     r4, r4, CFG_IBAT0L@l
 772         lis     r3, CFG_IBAT0U@h
 773         ori     r3, r3, CFG_IBAT0U@l
 774         mtspr   IBAT0L, r4
 775         mtspr   IBAT0U, r3
 776         isync
 777
 778         lis     r4, CFG_DBAT0L@h
 779         ori     r4, r4, CFG_DBAT0L@l
 780         lis     r3, CFG_DBAT0U@h
 781         ori     r3, r3, CFG_DBAT0U@l
 782         mtspr   DBAT0L, r4
 783         mtspr   DBAT0U, r3
 784         isync
 785
 786         lis     r4, CFG_IBAT1L@h
 787         ori     r4, r4, CFG_IBAT1L@l
 788         lis     r3, CFG_IBAT1U@h
 789         ori     r3, r3, CFG_IBAT1U@l
 790         mtspr   IBAT1L, r4
 791         mtspr   IBAT1U, r3
 792         isync
 793
 794         lis     r4, CFG_DBAT1L@h
 795         ori     r4, r4, CFG_DBAT1L@l
 796         lis     r3, CFG_DBAT1U@h
 797         ori     r3, r3, CFG_DBAT1U@l
 798         mtspr   DBAT1L, r4
 799         mtspr   DBAT1U, r3
 800         isync
 801
 802         lis     r4, CFG_IBAT2L@h
 803         ori     r4, r4, CFG_IBAT2L@l
 804         lis     r3, CFG_IBAT2U@h
 805         ori     r3, r3, CFG_IBAT2U@l
 806         mtspr   IBAT2L, r4
 807         mtspr   IBAT2U, r3
 808         isync
 809
 810         lis     r4, CFG_DBAT2L@h
 811         ori     r4, r4, CFG_DBAT2L@l
 812         lis     r3, CFG_DBAT2U@h
 813         ori     r3, r3, CFG_DBAT2U@l
 814         mtspr   DBAT2L, r4
 815         mtspr   DBAT2U, r3
 816         isync
 817
 818         lis     r4, CFG_IBAT3L@h
 819         ori     r4, r4, CFG_IBAT3L@l
 820         lis     r3, CFG_IBAT3U@h
 821         ori     r3, r3, CFG_IBAT3U@l
 822         mtspr   IBAT3L, r4
 823         mtspr   IBAT3U, r3
 824         isync
 825
 826         lis     r4, CFG_DBAT3L@h
 827         ori     r4, r4, CFG_DBAT3L@l
 828         lis     r3, CFG_DBAT3U@h
 829         ori     r3, r3, CFG_DBAT3U@l
 830         mtspr   DBAT3L, r4
 831         mtspr   DBAT3U, r3
 832         isync
 833
 834         /* Invalidate TLBs.
 835          * -> for (val = 0; val < 0x20000; val+=0x1000)
 836          * ->   tlbie(val);
 837          */
 838         lis     r3, 0
 839         lis     r5, 2
 840
 841 1:
 842         tlbie   r3
 843         addi    r3, r3, 0x1000
 844         cmp     0, 0, r3, r5
 845         blt     1b
 846
 847         blr
 848
 849