1 Freescale MPC83xx ADS Boards
2 -----------------------------------------
4 0. Toolchain / Building
6 $ PATH=$PATH:/usr/powerpc/bin
7 $ CROSS_COMPILE=powerpc-linux-
8 $ export PATH CROSS_COMPILE
10 $ powerpc-linux-gcc -v
11 Reading specs from /usr/powerpc/lib/gcc/powerpc-linux/3.4.3/specs
12 Configured with: ../configure --prefix=/usr/powerpc
13 --exec-prefix=/usr/powerpc --target=powerpc-linux --enable-shared
14 --disable-nls --disable-multilib --enable-languages=c,c++,ada,f77,objc
16 gcc version 3.4.3 (Debian)
19 GNU assembler version 2.15 (powerpc-linux) using BFD version 2.15
22 $ make MPC8349ADS_config
23 Configuring for MPC8349ADS board...
28 1. Board Switches and Jumpers
33 2.1. The memory map should look pretty much like this:
35 0x0000_0000 0x7fff_ffff DDR 2G
36 0x8000_0000 0x9fff_ffff PCI MEM 512M
37 0xc000_0000 0xdfff_ffff Rapid IO 512M
38 0xe000_0000 0xe00f_ffff CCSR 1M
39 0xe200_0000 0xe2ff_ffff PCI IO 16M
40 0xf000_0000 0xf7ff_ffff SDRAM 128M
41 0xf800_0000 0xf80f_ffff BCSR 1M
42 0xfe00_0000 0xffff_ffff FLASH (boot bank) 16M
47 3.1 Explanation of NEW definitions in:
49 include/configs/MPC8349ADS.h
51 CONFIG_MPC83xx MPC83xx family
52 CONFIG_MPC8349 MPC8349 specific
53 CONFIG_MPC8349ADS MPC8349ADS board specific
54 CONFIG_TSEC_ENET Use on-chip 10/100/1000 ethernet
59 Assuming you're using BASH shell:
61 export CROSS_COMPILE=your-cross-compile-prefix
64 make MPC8349ADS_config
67 5. Downloading and Flashing Images
69 5.0 Download over serial line using Kermit:
74 send <u-boot-bin-image>
83 5.1 Reflash U-Boot Image using U-Boot
86 protect off fe000000 fe09ffff
87 erase fe000000 fe09ffff
89 cp.b 10000 fe000000 xxxx
91 cp.b 10000 fe000000 a0000
93 You might have to supply the correct byte count for 'xxxx' from
94 the TFTP. Maybe a0000 will work too, that corresponds to the