doc/README.mpc85xxads

   1 Motorola MPC8540ADS and MPC8560ADS board
   2
   3 Xianghua Xiao(X.Xiao@motorola.com)
   4 Created 10/15/03
   5 -----------------------------------------
   6
   7 1. SWITCH SETTINGS & JUMPERS
   8 1.1 First, make sure the board default setting is consistent with the document
   9     shipped with your board. Then apply the following changes:
  10     SW3[1-6]="all OFF"  (boot from 32bit flash, no boot sequence is used)
  11     SW10[2-6]="all OFF" (turn on CPM SCC for serial port,works for 8540/8560)
  12     SW11[2]='OFF for dracom, ON for draco' (single switch to toggle draco.dracom mode)
  13     SW4[7-8]="OFF OFF" (enable serial ports,I'm using the top serial connector)
  14     SW22[1-4]="OFF OFF ON OFF"
  15     SW5[1-10[="ON ON OFF OFF OFF OFF OFF OFF OFF OFF"
  16     J1 = "Enable Prog" (Make sure your flash is programmable for development)
  17     Ethernet PHY connectors(J47,J56) should be removed if you want to use the ethernet.
  18 1.2 If you want to test PCI functionality with a 33Mhz PCI card, you will have to change
  19     the system clock from the default 66Mhz to 33Mhz by  setting SW15[1]="OFF" and
  20     SW17[8]="OFF". After that you may also need double your platform clock(SW6) because
  21     the system clock is now only half of its original value.
  22 1.3 SW6 is a very important switch, it decides your platform clock and CPU clock based on
  23     the on-board system clock(default 66MHz). Check the document along with your board
  24     for details.
  25
  26 2. MEMORY MAP TO WORK WITH LINUX KERNEL
  27 2.1. For the initial bringup, we adopted a consistent memory scheme between u-boot and
  28     linux kernel, you can customize it based on your system requirements:
  29       DDR:          0x00000000-0x1fffffff (max 512MB)
  30       PCI:          0xe0000000-0xefffffff (256MB)
  31       RIO:          0xf0000000-0xf7ffffff (128MB)
  32       Local SDRAM:  0xf8000000-0xfbffffff (64MB)
  33       Local CSx:    0xfc000000-0xfdefffff (31MB) BCSR,RTC,ATM config,etc.
  34       CCSRBAR:      0xfdf00000-0xfdffffff (1MB)
  35       Flash:        0xfe000000-0xffffffff (max 32MB)
  36 2.2  We are submitting Linux kernel patches for MPC8540 and MPC8560. Hope you will be
  37      able to download them from linuxppc-2.4 public source by the time you are reading
  38      this. Please make sure the kernel's ppcboot.h is consistent with U-Boot's u-boot.h,
  39      then you can use two default configuration files in the kernel source as a test:
  40         arch/ppc/configs/mpc8540ads_defconfig
  41         arch/ppc/configs/mpc8560ads_defconfig
  42
  43 3. DEFINITIONS AND COMPILATION
  44 3.1 Explanation on NEW definitions in include/configs/MPC8540ADS.h and include/
  45     configs/MPC8560ADS.h
  46     CONFIG_BOOKE            BOOKE(e.g. Motorola MPC85xx, IBM 440, etc)
  47     CONFIG_E500             BOOKE e500 family(Motorola)
  48     CONFIG_MPC85xx          MPC8540,MPC8560 and their derivatives
  49     CONFIG_MPC85xx_REV1     MPC85xx Rev 1 Chip, in general you will use a Rev2
  50                             chip from Nov.2003. If you still see this definition
  51                             while you have a Rev2(and newer) chip,undef this.
  52     CONFIG_MPC8540          MPC8540 specific
  53     CONFIG_MPC8560          MPC8560 specific
  54     CONFIG_MPC8540ADS       MPC8540ADS board specific
  55     CONFIG_MPC8560ADS       MPC8560ADS board specific
  56     CONFIG_TSEC_ENET        Use on-chip 10/100/1000 ethernet for networking
  57     CONFIG_SPD_EEPROM       Use SPD EEPROM for DDR auto configuration, you can also
  58                             manual config the DDR after undef this definition.
  59     CONFIG_DDR_ECC          only for ECC DDR module
  60     CONFIG_DDR_DLL          possible DLL fix needed for Rev1 chip for more stability.
  61                             you can disable this if you're having a newer chip.
  62     CONFIG_RAM_AS_FLASH     after define this, you can load U-Boot into localbus
  63                             SDRAM and treat localbus SDRAM as a flash. We use this
  64                             memory based U-Boot before flash is working while Metrowerks
  65                             and Windriver are still working on their flash/JTAG tools.
  66                             if you can program the flash directly, undef this.
  67     Other than the above definitions, the rest in the config files are straightforward.
  68
  69
  70 3.2 Compilation
  71    export CROSS_COMPILE=your-cross-compile-prefix(assuming you're using BASH shell)
  72    cd u-boot
  73    make distclean
  74    make MPC8560ADS_config (or make MPC8540ADS_config)
  75    make
  76
  77 4.  Note on the 10/100/1000 Ethernet controller:
  78 4.1 Sometimes after U-Boot is up, the 'tftp' won't work well with TSEC ethernet. If that
  79    happens, you can try the following steps to make network work:
  80    MPC8560ADS>tftp 1000000 pImage
  81    (if it hangs, use Ctrl-C to quit)
  82    MPC8560ADS>nm fdf24524
  83    >0
  84    >1
  85    >. (to quit this memory operation)
  86    MPC8560ADS>tftp 1000000 pImage
  87
  88 5. Screen dump:
  89 5.1 MPC8540ADS board
  90 U-Boot 1.0.0-pre (Oct 15 2003 - 13:40:33)
  91
  92 Motorola PowerPC ProcessorID=00000000 Rev. PVR=80200010
  93 Board: Motorola MPC8540ADS Board
  94         CPU: 792 MHz
  95         CCB: 264 MHz
  96         DDR: 132 MHz
  97         LBC: 66 MHz
  98 L1 D-cache 32KB, L1 I-cache 32KB enabled.
  99 I2C:   ready
 100 DRAM:  DDR module detected, total size:128MB.
 101 128 MB
 102 FLASH: 16 MB
 103 L2 cache enabled: 256KB
 104 *** Warning - bad CRC, using default environment
 105
 106 In:    serial
 107 Out:   serial
 108 Err:   serial
 109 Net:   MOTOROLA ETHERNE
 110 Hit any key to stop autoboot:  0
 111 MPC8540ADS=> fli
 112
 113 Bank # 1: Intel 28F640J3A (64 Mbit, 64 x 128K)
 114   Size: 16 MB in 64 Sectors
 115   Sector Start Addresses:
 116     FF000000      FF040000      FF080000      FF0C0000      FF100000
 117     FF140000      FF180000      FF1C0000      FF200000      FF240000
 118     FF280000      FF2C0000      FF300000      FF340000      FF380000
 119     FF3C0000      FF400000      FF440000      FF480000      FF4C0000
 120     FF500000      FF540000      FF580000      FF5C0000      FF600000
 121     FF640000      FF680000      FF6C0000      FF700000      FF740000
 122     FF780000      FF7C0000      FF800000      FF840000      FF880000
 123     FF8C0000      FF900000      FF940000      FF980000      FF9C0000
 124     FFA00000      FFA40000      FFA80000      FFAC0000      FFB00000
 125     FFB40000      FFB80000      FFBC0000      FFC00000      FFC40000
 126     FFC80000      FFCC0000      FFD00000      FFD40000      FFD80000
 127     FFDC0000      FFE00000      FFE40000      FFE80000      FFEC0000
 128     FFF00000      FFF40000      FFF80000 (RO) FFFC0000 (RO)
 129 MPC8540ADS=> imi ff000000
 130
 131 ## Checking Image at ff000000 ...
 132    Image Name:   Linux-2.4.21-rc5
 133    Image Type:   PowerPC Linux Kernel Image (gzip compressed)
 134    Data Size:    800594 Bytes = 781.8 kB
 135    Load Address: 00000000
 136    Entry Point:  00000000
 137    Verifying Checksum ... OK
 138 MPC8540ADS=> bdinfo
 139 memstart    = 0x00000000
 140 memsize     = 0x08000000
 141 flashstart  = 0xFF000000
 142 flashsize   = 0x01000000
 143 flashoffset = 0x00000000
 144 sramstart   = 0x00000000
 145 sramsize    = 0x00000000
 146 immr_base   = 0xFDF00000
 147 bootflags   = 0x40003F80
 148 intfreq     =    792 MHz
 149 busfreq     =    264 MHz
 150 ethaddr     = 00:01:AF:07:9B:8A
 151 eth1addr    = 00:01:AF:07:9B:8B
 152 eth2addr    = 00:01:AF:07:9B:8C
 153 IP addr     = 10.82.0.105
 154 baudrate    = 115200 bps
 155 MPC8540ADS=> printenv
 156 bootargs=root=/dev/nfs rw nfsroot=163.12.64.52:/localhome/r6aads/linuxppc/target ip=10.82.0.105:163.12.64.52:10.82.1.254:255.255.254.0:mpc8540ads-003:eth0:off console=ttyS0,115200
 157 bootcmd=bootm 0xff300000 0xff700000
 158 bootdelay=3
 159 baudrate=115200
 160 loads_echo=1
 161 ethaddr=00:01:af:07:9b:8a
 162 eth1addr=00:01:af:07:9b:8b
 163 eth2addr=00:01:af:07:9b:8c
 164 ipaddr=10.82.0.105
 165 serverip=163.12.64.52
 166 rootpath=/home/r6aads/mpclinux/eldk-2.0.2/ppc_82xx
 167 gatewayip=10.82.1.254
 168 netmask=255.255.254.0
 169 hostname=MPC8560ADS_PILOT_003
 170 bootfile=pImage
 171 stdin=serial
 172 stdout=serial
 173 stderr=serial
 174
 175 Environment size: 560/8188 bytes
 176 MPC8540ADS=> bootm ff000000
 177 ## Booting image at ff000000 ...
 178    Image Name:   Linux-2.4.21-rc5
 179    Image Type:   PowerPC Linux Kernel Image (gzip compressed)
 180    Data Size:    800594 Bytes = 781.8 kB
 181    Load Address: 00000000
 182    Entry Point:  00000000
 183    Verifying Checksum ... OK
 184    Uncompressing Kernel Image ... OK
 185 mpc85xx_init(): exit
 186 id mach(): done
 187 MMU:enter
 188 Memory CAM mapping: CAM0=64Mb, CAM1=64Mb, CAM2=0Mb residual: 0Mb
 189 MMU:hw init
 190 MMU:mapin
 191 MMU:mapin_ram done
 192 MMU:setio
 193 MMU:exit
 194 Linux version 2.4.21-rc5 (@etest) (gcc version 2.95.3 20010315 (release)) #1 Wed Oct 15 09:05:42 CDT 2003
 195 setup_arch: enter
 196 setup_arch: bootmem
 197 mpc85xx_setup_arch
 198 Host Bridge Vendor ID = 1057
 199 Host Bridge Device ID = 3
 200 Host Bridge header = 0
 201 arch: exit
 202 On node 0 totalpages: 32768
 203 zone(0): 32768 pages.
 204 zone(1): 0 pages.
 205 zone(2): 0 pages.
 206 Kernel command line: root=/dev/nfs rw nfsroot=163.12.64.52:/localhome/r6aads/linuxppc/target ip=10.82.0.105:163.12.64.52:10.82.1.254:255.255.254.0:mpc8540ads-003:eth0:off console=ttyS0,115200
 207 openpic: enter
 208 OpenPIC Version 1.2 (1 CPUs and 44 IRQ sources) at fdf40000
 209 openpic: timer
 210 openpic: external
 211 openpic: spurious
 212 openpic: exit
 213 time_init: decrementer frequency = 33.000000 MHz
 214 Calibrating delay loop... 226.09 BogoMIPS
 215 Memory: 127488k available (1344k kernel code, 448k data, 248k init, 0k highmem)
 216 Dentry cache hash table entries: 16384 (order: 5, 131072 bytes)
 217 Inode cache hash table entries: 8192 (order: 4, 65536 bytes)
 218 Mount cache hash table entries: 512 (order: 0, 4096 bytes)
 219 Buffer-cache hash table entries: 8192 (order: 3, 32768 bytes)
 220 Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
 221 POSIX conformance testing by UNIFIX
 222 PCI: Probing PCI hardware
 223
 224 Linux NET4.0 for Linux 2.4
 225 Based upon Swansea University Computer Society NET3.039
 226 Initializing RT netlink socket
 227 Starting kswapd
 228 Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
 229 pty: 256 Unix98 ptys configured
 230 Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
 231 ttyS00 at 0xfdf04500 (irq = 90) is a 16550A
 232 ttyS01 at 0xfdf04600 (irq = 0) is a 16550A
 233 eth0: Three Speed Ethernet Controller Version 0.2, 00:01:af:07:9b:8a:
 234 eth1: Three Speed Ethernet Controller Version 0.2, 00:01:af:07:9b:8b:
 235 RAMDISK driver initialized: 16 RAM disks of 32768K size 1024 blocksize
 236 loop: loaded (max 8 devices)
 237 Intel(R) PRO/1000 Network Driver - version 5.0.43-k1
 238 Copyright (c) 1999-2003 Intel Corporation.
 239 PPP generic driver version 2.4.2
 240 PPP Deflate Compression module registered
 241 NET4: Linux TCP/IP 1.0 for NET4.0
 242 IP Protocols: ICMP, UDP, TCP, IGMP
 243 IP: routing cache hash table of 1024 buckets, 8Kbytes
 244 TCP: Hash tables configured (established 8192 bind 8192)
 245 IP-Config: Complete:
 246       device=eth0, addr=10.82.0.105, mask=255.255.254.0, gw=10.82.1.254,
 247      host=mpc8540ads-003, domain=, nis-domain=(none),
 248      bootserver=163.12.64.52, rootserver=163.12.64.52, rootpath=
 249 NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
 250 Looking up port of RPC 100003/2 on 163.12.64.52
 251 Looking up port of RPC 100005/1 on 163.12.64.52
 252 VFS: Mounted root (nfs filesystem).
 253 Freeing unused kernel memory: 248k init
 254 INIT: version 2.78 booting
 255 Activating swap...
 256 Checking all file systems...
 257 Parallelizing fsck version 1.22 (22-Jun-2001)
 258 Mounting local filesystems...
 259 nothing was mounted
 260 Cleaning: /etc/network/ifstate.
 261 Setting up IP spoofing protection: rp_filter.
 262 Disable TCP/IP Explicit Congestion Notification: done.
 263 Configuring network interfaces: done.
 264 Starting portmap daemon: portmap.
 265 Cleaning: /tmp /var/lock /var/run.
 266 INIT: Entering runlevel: 2
 267 Starting system log daemon: syslogd klogd.
 268 Starting internet superserver: inetd.
 269
 270 mpc8540ads-003 login: root
 271 Last login: Thu Jan  1 00:00:07 1970 on console
 272 Linux mpc8540ads-003 2.4.21-rc5 #1 Wed Oct 15 09:05:42 CDT 2003 ppc unknown
 273
 274 root@mpc8540ads-003:~# ls
 275 21142.o     aa       e100.o      hello.o      mii.o    timer.o
 276 root@mpc8540ads-003:~# /sbin/ifconfig
 277 eth0      Link encap:Ethernet  HWaddr 00:01:AF:07:9B:8A
 278           inet addr:10.82.0.105  Bcast:10.82.1.255  Mask:255.255.254.0
 279           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
 280           RX packets:4576 errors:0 dropped:0 overruns:0 frame:0
 281           TX packets:2587 errors:0 dropped:0 overruns:0 carrier:0
 282           collisions:0 txqueuelen:100
 283           RX bytes:4457023 (4.2 Mb)  TX bytes:437770 (427.5 Kb)
 284           Base address:0x4000
 285
 286 lo        Link encap:Local Loopback
 287           inet addr:127.0.0.1  Mask:255.0.0.0
 288           UP LOOPBACK RUNNING  MTU:16436  Metric:1
 289           RX packets:4 errors:0 dropped:0 overruns:0 frame:0
 290           TX packets:4 errors:0 dropped:0 overruns:0 carrier:0
 291           collisions:0 txqueuelen:0
 292           RX bytes:296 (296.0 b)  TX bytes:296 (296.0 b)
 293
 294 root@mpc8540ads-003:~# ping 163.12.64.52
 295 PING 163.12.64.52 (163.12.64.52): 56 data bytes
 296 64 bytes from 163.12.64.52: icmp_seq=0 ttl=63 time=0.2 ms
 297 64 bytes from 163.12.64.52: icmp_seq=1 ttl=63 time=0.1 ms
 298 64 bytes from 163.12.64.52: icmp_seq=2 ttl=63 time=0.1 ms
 299
 300 --- 163.12.64.52 ping statistics ---
 301 3 packets transmitted, 3 packets received, 0% packet loss
 302 round-trip min/avg/max = 0.1/0.1/0.2 ms
 303 root@mpc8540ads-003:~#
 304
 305 5.2 MPC8560ADS board
 306 U-Boot 1.0.0-pre (Oct 15 2003 - 13:42:04)
 307
 308 Motorola PowerPC ProcessorID=00000000 Rev. PVR=80200010
 309 Board: Motorola MPC8560ADS Board
 310         CPU: 792 MHz
 311         CCB: 264 MHz
 312         DDR: 132 MHz
 313         LBC: 66 MHz
 314         CPM: 264 Mhz
 315 L1 D-cache 32KB, L1 I-cache 32KB enabled.
 316 I2C:   ready
 317 DRAM:  DDR module detected, total size:128MB.
 318 128 MB
 319 FLASH: 16 MB
 320 L2 cache enabled: 256KB
 321 *** Warning - bad CRC, using default environment
 322
 323 In:    serial
 324 Out:   serial
 325 Err:   serial
 326 Net:   MOTOROLA ETHERNE
 327 Hit any key to stop autoboot:  3
 328 MPC8560ADS=> bdinfo
 329 memstart    = 0x00000000
 330 memsize     = 0x08000000
 331 flashstart  = 0xFF000000
 332 flashsize   = 0x01000000
 333 flashoffset = 0x00000000
 334 sramstart   = 0x00000000
 335 sramsize    = 0x00000000
 336 immr_base   = 0xFDF00000
 337 bootflags   = 0x00000000
 338 vco         =    528 MHz
 339 sccfreq     =    132 MHz
 340 brgfreq     =    132 MHz
 341 intfreq     =    792 MHz
 342 cpmfreq     =    264 MHz
 343 busfreq     =    264 MHz
 344 ethaddr     = 00:01:AF:07:9B:8A
 345 eth1addr    = 00:01:AF:07:9B:8B
 346 eth2addr    = 00:01:AF:07:9B:8C
 347 IP addr     = 10.82.0.105
 348 baudrate    = 115200 bps
 349 MPC8560ADS=> printenv
 350 bootargs=root=/dev/nfs rw nfsroot=163.12.64.52:/localhome/r6aads/linuxppc/target ip=10.82.0.105:163.12.64.52:10.82.1.254:255.255.254.0:mpc8560ads-003:eth0:off console=ttyS0,115200
 351 bootcmd=bootm 0xff400000 0xff700000
 352 bootdelay=3
 353 baudrate=115200
 354 loads_echo=1
 355 ethaddr=00:01:af:07:9b:8a
 356 eth1addr=00:01:af:07:9b:8b
 357 eth2addr=00:01:af:07:9b:8c
 358 ipaddr=10.82.0.105
 359 serverip=163.12.64.52
 360 rootpath=/home/r6aads/mpclinux/eldk-2.0.2/ppc_82xx
 361 gatewayip=10.82.1.254
 362 netmask=255.255.254.0
 363 hostname=MPC8560ADS_PILOT_003
 364 bootfile=pImage
 365 stdin=serial
 366 stdout=serial
 367 stderr=serial
 368
 369 Environment size: 560/8188 bytes
 370 MPC8560ADS=> fli
 371
 372 Bank # 1: Intel 28F640J3A (64 Mbit, 64 x 128K)
 373   Size: 16 MB in 64 Sectors
 374   Sector Start Addresses:
 375     FF000000      FF040000      FF080000      FF0C0000      FF100000
 376     FF140000      FF180000      FF1C0000      FF200000      FF240000
 377     FF280000      FF2C0000      FF300000      FF340000      FF380000
 378     FF3C0000      FF400000      FF440000      FF480000      FF4C0000
 379     FF500000      FF540000      FF580000      FF5C0000      FF600000
 380     FF640000      FF680000      FF6C0000      FF700000      FF740000
 381     FF780000      FF7C0000      FF800000      FF840000      FF880000
 382     FF8C0000      FF900000      FF940000      FF980000      FF9C0000
 383     FFA00000      FFA40000      FFA80000      FFAC0000      FFB00000
 384     FFB40000      FFB80000      FFBC0000      FFC00000      FFC40000
 385     FFC80000      FFCC0000      FFD00000      FFD40000      FFD80000
 386     FFDC0000      FFE00000      FFE40000      FFE80000      FFEC0000
 387     FFF00000      FFF40000      FFF80000 (RO) FFFC0000 (RO)
 388 MPC8560ADS=> imi ff100000
 389
 390 ## Checking Image at ff100000 ...
 391    Image Name:   Linux-2.4.21-rc5
 392    Image Type:   PowerPC Linux Kernel Image (gzip compressed)
 393    Data Size:    755361 Bytes = 737.7 kB
 394    Load Address: 00000000
 395    Entry Point:  00000000
 396    Verifying Checksum ... OK
 397 MPC8560ADS=> tftp 1000000 pImage.dracom.public
 398 TFTP from server 163.12.64.52; our IP address is 10.82.0.105; sending through gateway 10.82.1.254
 399 Filename 'pImage.dracom.public'.
 400 Load address: 0x1000000
 401 Loading: *#################################################################
 402          #################################################################
 403          ##################
 404 done
 405 Bytes transferred = 755425 (b86e1 hex)
 406 MPC8560ADS=> bootm ff100000
 407 ## Booting image at ff100000 ...
 408    Image Name:   Linux-2.4.21-rc5
 409    Image Type:   PowerPC Linux Kernel Image (gzip compressed)
 410    Data Size:    755361 Bytes = 737.7 kB
 411    Load Address: 00000000
 412    Entry Point:  00000000
 413    Verifying Checksum ... OK
 414    Uncompressing Kernel Image ... OK
 415 mpc85xx_init(): exit
 416 id mach(): done
 417 MMU:enter
 418 Memory CAM mapping: CAM0=64Mb, CAM1=64Mb, CAM2=0Mb residual: 0Mb
 419 MMU:hw init
 420 MMU:mapin
 421 MMU:mapin_ram done
 422 MMU:setio
 423 MMU:exit
 424 Linux version 2.4.21-rc5 (@etest) (gcc version 2.95.3 20010315 (release)) #2 Wed Oct 15 09:13:46 CDT 2003
 425 setup_arch: enter
 426 setup_arch: bootmem
 427 mpc85xx_setup_arch
 428 Host Bridge Vendor ID = 1057
 429 Host Bridge Device ID = 3
 430 Host Bridge header = 0
 431 arch: exit
 432 On node 0 totalpages: 32768
 433 zone(0): 32768 pages.
 434 zone(1): 0 pages.
 435 zone(2): 0 pages.
 436 Kernel command line: root=/dev/nfs rw nfsroot=163.12.64.52:/localhome/r6aads/linuxppc/target ip=10.82.0.105:163.12.64.52:10.82.1.254:255.255.254.0:mpc8560ads-003:eth0:off console=ttyS0,115200
 437 openpic: enter
 438 OpenPIC Version 1.2 (1 CPUs and 44 IRQ sources) at fdf40000
 439 openpic: timer
 440 openpic: external
 441 openpic: spurious
 442 openpic: exit
 443 time_init: decrementer frequency = 33.000000 MHz
 444 Calibrating delay loop... 226.09 BogoMIPS
 445 Memory: 127624k available (1276k kernel code, 384k data, 236k init, 0k highmem)
 446 Dentry cache hash table entries: 16384 (order: 5, 131072 bytes)
 447 Inode cache hash table entries: 8192 (order: 4, 65536 bytes)
 448 Mount cache hash table entries: 512 (order: 0, 4096 bytes)
 449 Buffer-cache hash table entries: 8192 (order: 3, 32768 bytes)
 450 Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
 451 POSIX conformance testing by UNIFIX
 452 PCI: Probing PCI hardware
 453
 454 Linux NET4.0 for Linux 2.4
 455 Based upon Swansea University Computer Society NET3.039
 456 Initializing RT netlink socket
 457 Starting kswapd
 458 Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
 459 CPM UART driver version 0.01
 460 ttyS0 on SCC1 at 0x8000, BRG1
 461 UART interrupt installed(40)
 462 pty: 256 Unix98 ptys configured
 463 eth0: Three Speed Ethernet Controller Version 0.2, 00:01:af:07:9b:8a:
 464 eth1: Three Speed Ethernet Controller Version 0.2, 00:01:af:07:9b:8b:
 465 RAMDISK driver initialized: 16 RAM disks of 32768K size 1024 blocksize
 466 loop: loaded (max 8 devices)
 467 Intel(R) PRO/1000 Network Driver - version 5.0.43-k1
 468 Copyright (c) 1999-2003 Intel Corporation.
 469 PPP generic driver version 2.4.2
 470 PPP Deflate Compression module registered
 471 NET4: Linux TCP/IP 1.0 for NET4.0
 472 IP Protocols: ICMP, UDP, TCP, IGMP
 473 IP: routing cache hash table of 1024 buckets, 8Kbytes
 474 TCP: Hash tables configured (established 8192 bind 8192)
 475 IP-Config: Complete:
 476       device=eth0, addr=10.82.0.105, mask=255.255.254.0, gw=10.82.1.254,
 477      host=mpc8560ads-003, domain=, nis-domain=(none),
 478      bootserver=163.12.64.52, rootserver=163.12.64.52, rootpath=
 479 NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
 480 Looking up port of RPC 100003/2 on 163.12.64.52
 481 Looking up port of RPC 100005/1 on 163.12.64.52
 482 VFS: Mounted root (nfs filesystem).
 483 Freeing unused kernel memory: 236k init
 484 INIT: version 2.78 booting
 485 Activating swap...
 486 Checking all file systems...
 487 Parallelizing fsck version 1.22 (22-Jun-2001)
 488 Mounting local filesystems...
 489 nothing was mounted
 490 Cleaning: /etc/network/ifstate.
 491 Setting up IP spoofing protection: FAILED
 492 Configuring network interfaces: done.
 493 Starting portmap daemon: portmap.
 494 Cleaning: /tmp /var/lock /var/run.
 495 INIT: Entering runlevel: 2
 496 Starting system log daemon: syslogd klogd.
 497 Starting internet superserver: inetd.
 498
 499 mpc8560ads-003 login: root
 500 Last login: Thu Jan  1 00:00:05 1970 on console
 501 Linux mpc8560ads-003 2.4.21-rc5 #2 Wed Oct 15 09:13:46 CDT 2003 ppc unknown
 502
 503 root@mpc8560ads-003:~# ls
 504 21142.o     aa       e100.o      hello.o      mii.o    timer.o
 505 root@mpc8560ads-003:~# cd /
 506 root@mpc8560ads-003:/# ls
 507 bin  boot  dev  etc  home  lib  mnt  opt  proc  root  sbin  tmp  usr  var
 508 root@mpc8560ads-003:/# /sbin/ifconfig
 509 eth0      Link encap:Ethernet  HWaddr 00:01:AF:07:9B:8A
 510           inet addr:10.82.0.105  Bcast:10.82.1.255  Mask:255.255.254.0
 511           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
 512           RX packets:4608 errors:0 dropped:0 overruns:0 frame:0
 513           TX packets:2610 errors:0 dropped:0 overruns:0 carrier:0
 514           collisions:0 txqueuelen:100
 515           RX bytes:4465943 (4.2 Mb)  TX bytes:440944 (430.6 Kb)
 516           Base address:0x4000
 517
 518 lo        Link encap:Local Loopback
 519           inet addr:127.0.0.1  Mask:255.0.0.0
 520           UP LOOPBACK RUNNING  MTU:16436  Metric:1
 521           RX packets:4 errors:0 dropped:0 overruns:0 frame:0
 522           TX packets:4 errors:0 dropped:0 overruns:0 carrier:0
 523           collisions:0 txqueuelen:0
 524           RX bytes:296 (296.0 b)  TX bytes:296 (296.0 b)
 525
 526 root@mpc8560ads-003:/# ping 163.12.64.52
 527 PING 163.12.64.52 (163.12.64.52): 56 data bytes
 528 64 bytes from 163.12.64.52: icmp_seq=0 ttl=63 time=0.1 ms
 529 64 bytes from 163.12.64.52: icmp_seq=1 ttl=63 time=0.1 ms
 530 64 bytes from 163.12.64.52: icmp_seq=2 ttl=63 time=0.1 ms
 531
 532 --- 163.12.64.52 ping statistics ---
 533 3 packets transmitted, 3 packets received, 0% packet loss
 534 round-trip min/avg/max = 0.1/0.1/0.1 ms
 535 root@mpc8560ads-003:/#