io_uring: reset -EBUSY error when io sq thread is waken up

[thirdparty/linux.git] / drivers / acpi / sleep.c

// SPDX-License-Identifier: GPL-2.0-only
/*
 * sleep.c - ACPI sleep support.
 *
 * Copyright (c) 2005 Alexey Starikovskiy <alexey.y.starikovskiy@intel.com>
 * Copyright (c) 2004 David Shaohua Li <shaohua.li@intel.com>
 * Copyright (c) 2000-2003 Patrick Mochel
 * Copyright (c) 2003 Open Source Development Lab
 */

#include <linux/delay.h>
#include <linux/irq.h>
#include <linux/dmi.h>
#include <linux/device.h>
#include <linux/interrupt.h>
#include <linux/suspend.h>
#include <linux/reboot.h>
#include <linux/acpi.h>
#include <linux/module.h>
#include <linux/syscore_ops.h>
#include <asm/io.h>
#include <trace/events/power.h>

#include "internal.h"
#include "sleep.h"

/*
 * Some HW-full platforms do not have _S5, so they may need
 * to leverage efi power off for a shutdown.
 */
bool acpi_no_s5;
static u8 sleep_states[ACPI_S_STATE_COUNT];

static void acpi_sleep_tts_switch(u32 acpi_state)
{
        acpi_status status;

        status = acpi_execute_simple_method(NULL, "\\_TTS", acpi_state);
        if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
                /*
                 * OS can't evaluate the _TTS object correctly. Some warning
                 * message will be printed. But it won't break anything.
                 */
                printk(KERN_NOTICE "Failure in evaluating _TTS object\n");
        }
}

static int tts_notify_reboot(struct notifier_block *this,
                        unsigned long code, void *x)
{
        acpi_sleep_tts_switch(ACPI_STATE_S5);
        return NOTIFY_DONE;
}

static struct notifier_block tts_notifier = {
        .notifier_call  = tts_notify_reboot,
        .next           = NULL,
        .priority       = 0,
};

static int acpi_sleep_prepare(u32 acpi_state)
{
#ifdef CONFIG_ACPI_SLEEP
        unsigned long acpi_wakeup_address;

        /* do we have a wakeup address for S2 and S3? */
        if (acpi_state == ACPI_STATE_S3) {
                acpi_wakeup_address = acpi_get_wakeup_address();
                if (!acpi_wakeup_address)
                        return -EFAULT;
                acpi_set_waking_vector(acpi_wakeup_address);

        }
        ACPI_FLUSH_CPU_CACHE();
#endif
        printk(KERN_INFO PREFIX "Preparing to enter system sleep state S%d\n",
                acpi_state);
        acpi_enable_wakeup_devices(acpi_state);
        acpi_enter_sleep_state_prep(acpi_state);
        return 0;
}

bool acpi_sleep_state_supported(u8 sleep_state)
{
        acpi_status status;
        u8 type_a, type_b;

        status = acpi_get_sleep_type_data(sleep_state, &type_a, &type_b);
        return ACPI_SUCCESS(status) && (!acpi_gbl_reduced_hardware
                || (acpi_gbl_FADT.sleep_control.address
                        && acpi_gbl_FADT.sleep_status.address));
}

#ifdef CONFIG_ACPI_SLEEP
static bool sleep_no_lps0 __read_mostly;
module_param(sleep_no_lps0, bool, 0644);
MODULE_PARM_DESC(sleep_no_lps0, "Do not use the special LPS0 device interface");

static u32 acpi_target_sleep_state = ACPI_STATE_S0;

u32 acpi_target_system_state(void)
{
        return acpi_target_sleep_state;
}
EXPORT_SYMBOL_GPL(acpi_target_system_state);

static bool pwr_btn_event_pending;

/*
 * The ACPI specification wants us to save NVS memory regions during hibernation
 * and to restore them during the subsequent resume.  Windows does that also for
 * suspend to RAM.  However, it is known that this mechanism does not work on
 * all machines, so we allow the user to disable it with the help of the
 * 'acpi_sleep=nonvs' kernel command line option.
 */
static bool nvs_nosave;

void __init acpi_nvs_nosave(void)
{
        nvs_nosave = true;
}

/*
 * The ACPI specification wants us to save NVS memory regions during hibernation
 * but says nothing about saving NVS during S3.  Not all versions of Windows
 * save NVS on S3 suspend either, and it is clear that not all systems need
 * NVS to be saved at S3 time.  To improve suspend/resume time, allow the
 * user to disable saving NVS on S3 if their system does not require it, but
 * continue to save/restore NVS for S4 as specified.
 */
static bool nvs_nosave_s3;

void __init acpi_nvs_nosave_s3(void)
{
        nvs_nosave_s3 = true;
}

static int __init init_nvs_save_s3(const struct dmi_system_id *d)
{
        nvs_nosave_s3 = false;
        return 0;
}

/*
 * ACPI 1.0 wants us to execute _PTS before suspending devices, so we allow the
 * user to request that behavior by using the 'acpi_old_suspend_ordering'
 * kernel command line option that causes the following variable to be set.
 */
static bool old_suspend_ordering;

void __init acpi_old_suspend_ordering(void)
{
        old_suspend_ordering = true;
}

static int __init init_old_suspend_ordering(const struct dmi_system_id *d)
{
        acpi_old_suspend_ordering();
        return 0;
}

static int __init init_nvs_nosave(const struct dmi_system_id *d)
{
        acpi_nvs_nosave();
        return 0;
}

static bool acpi_sleep_default_s3;

static int __init init_default_s3(const struct dmi_system_id *d)
{
        acpi_sleep_default_s3 = true;
        return 0;
}

static const struct dmi_system_id acpisleep_dmi_table[] __initconst = {
        {
        .callback = init_old_suspend_ordering,
        .ident = "Abit KN9 (nForce4 variant)",
        .matches = {
                DMI_MATCH(DMI_BOARD_VENDOR, "http://www.abit.com.tw/"),
                DMI_MATCH(DMI_BOARD_NAME, "KN9 Series(NF-CK804)"),
                },
        },
        {
        .callback = init_old_suspend_ordering,
        .ident = "HP xw4600 Workstation",
        .matches = {
                DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
                DMI_MATCH(DMI_PRODUCT_NAME, "HP xw4600 Workstation"),
                },
        },
        {
        .callback = init_old_suspend_ordering,
        .ident = "Asus Pundit P1-AH2 (M2N8L motherboard)",
        .matches = {
                DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTek Computer INC."),
                DMI_MATCH(DMI_BOARD_NAME, "M2N8L"),
                },
        },
        {
        .callback = init_old_suspend_ordering,
        .ident = "Panasonic CF51-2L",
        .matches = {
                DMI_MATCH(DMI_BOARD_VENDOR,
                                "Matsushita Electric Industrial Co.,Ltd."),
                DMI_MATCH(DMI_BOARD_NAME, "CF51-2L"),
                },
        },
        {
        .callback = init_nvs_nosave,
        .ident = "Sony Vaio VGN-FW41E_H",
        .matches = {
                DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
                DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FW41E_H"),
                },
        },
        {
        .callback = init_nvs_nosave,
        .ident = "Sony Vaio VGN-FW21E",
        .matches = {
                DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
                DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FW21E"),
                },
        },
        {
        .callback = init_nvs_nosave,
        .ident = "Sony Vaio VGN-FW21M",
        .matches = {
                DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
                DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FW21M"),
                },
        },
        {
        .callback = init_nvs_nosave,
        .ident = "Sony Vaio VPCEB17FX",
        .matches = {
                DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
                DMI_MATCH(DMI_PRODUCT_NAME, "VPCEB17FX"),
                },
        },
        {
        .callback = init_nvs_nosave,
        .ident = "Sony Vaio VGN-SR11M",
        .matches = {
                DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
                DMI_MATCH(DMI_PRODUCT_NAME, "VGN-SR11M"),
                },
        },
        {
        .callback = init_nvs_nosave,
        .ident = "Everex StepNote Series",
        .matches = {
                DMI_MATCH(DMI_SYS_VENDOR, "Everex Systems, Inc."),
                DMI_MATCH(DMI_PRODUCT_NAME, "Everex StepNote Series"),
                },
        },
        {
        .callback = init_nvs_nosave,
        .ident = "Sony Vaio VPCEB1Z1E",
        .matches = {
                DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
                DMI_MATCH(DMI_PRODUCT_NAME, "VPCEB1Z1E"),
                },
        },
        {
        .callback = init_nvs_nosave,
        .ident = "Sony Vaio VGN-NW130D",
        .matches = {
                DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
                DMI_MATCH(DMI_PRODUCT_NAME, "VGN-NW130D"),
                },
        },
        {
        .callback = init_nvs_nosave,
        .ident = "Sony Vaio VPCCW29FX",
        .matches = {
                DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
                DMI_MATCH(DMI_PRODUCT_NAME, "VPCCW29FX"),
                },
        },
        {
        .callback = init_nvs_nosave,
        .ident = "Averatec AV1020-ED2",
        .matches = {
                DMI_MATCH(DMI_SYS_VENDOR, "AVERATEC"),
                DMI_MATCH(DMI_PRODUCT_NAME, "1000 Series"),
                },
        },
        {
        .callback = init_old_suspend_ordering,
        .ident = "Asus A8N-SLI DELUXE",
        .matches = {
                DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
                DMI_MATCH(DMI_BOARD_NAME, "A8N-SLI DELUXE"),
                },
        },
        {
        .callback = init_old_suspend_ordering,
        .ident = "Asus A8N-SLI Premium",
        .matches = {
                DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
                DMI_MATCH(DMI_BOARD_NAME, "A8N-SLI Premium"),
                },
        },
        {
        .callback = init_nvs_nosave,
        .ident = "Sony Vaio VGN-SR26GN_P",
        .matches = {
                DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
                DMI_MATCH(DMI_PRODUCT_NAME, "VGN-SR26GN_P"),
                },
        },
        {
        .callback = init_nvs_nosave,
        .ident = "Sony Vaio VPCEB1S1E",
        .matches = {
                DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
                DMI_MATCH(DMI_PRODUCT_NAME, "VPCEB1S1E"),
                },
        },
        {
        .callback = init_nvs_nosave,
        .ident = "Sony Vaio VGN-FW520F",
        .matches = {
                DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
                DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FW520F"),
                },
        },
        {
        .callback = init_nvs_nosave,
        .ident = "Asus K54C",
        .matches = {
                DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."),
                DMI_MATCH(DMI_PRODUCT_NAME, "K54C"),
                },
        },
        {
        .callback = init_nvs_nosave,
        .ident = "Asus K54HR",
        .matches = {
                DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."),
                DMI_MATCH(DMI_PRODUCT_NAME, "K54HR"),
                },
        },
        {
        .callback = init_nvs_save_s3,
        .ident = "Asus 1025C",
        .matches = {
                DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
                DMI_MATCH(DMI_PRODUCT_NAME, "1025C"),
                },
        },
        /*
         * https://bugzilla.kernel.org/show_bug.cgi?id=189431
         * Lenovo G50-45 is a platform later than 2012, but needs nvs memory
         * saving during S3.
         */
        {
        .callback = init_nvs_save_s3,
        .ident = "Lenovo G50-45",
        .matches = {
                DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
                DMI_MATCH(DMI_PRODUCT_NAME, "80E3"),
                },
        },
        /*
         * ThinkPad X1 Tablet(2016) cannot do suspend-to-idle using
         * the Low Power S0 Idle firmware interface (see
         * https://bugzilla.kernel.org/show_bug.cgi?id=199057).
         */
        {
        .callback = init_default_s3,
        .ident = "ThinkPad X1 Tablet(2016)",
        .matches = {
                DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
                DMI_MATCH(DMI_PRODUCT_NAME, "20GGA00L00"),
                },
        },
        {},
};

static bool ignore_blacklist;

void __init acpi_sleep_no_blacklist(void)
{
        ignore_blacklist = true;
}

static void __init acpi_sleep_dmi_check(void)
{
        if (ignore_blacklist)
                return;

        if (dmi_get_bios_year() >= 2012)
                acpi_nvs_nosave_s3();

        dmi_check_system(acpisleep_dmi_table);
}

/**
 * acpi_pm_freeze - Disable the GPEs and suspend EC transactions.
 */
static int acpi_pm_freeze(void)
{
        acpi_disable_all_gpes();
        acpi_os_wait_events_complete();
        acpi_ec_block_transactions();
        return 0;
}

/**
 * acpi_pre_suspend - Enable wakeup devices, "freeze" EC and save NVS.
 */
static int acpi_pm_pre_suspend(void)
{
        acpi_pm_freeze();
        return suspend_nvs_save();
}

/**
 *      __acpi_pm_prepare - Prepare the platform to enter the target state.
 *
 *      If necessary, set the firmware waking vector and do arch-specific
 *      nastiness to get the wakeup code to the waking vector.
 */
static int __acpi_pm_prepare(void)
{
        int error = acpi_sleep_prepare(acpi_target_sleep_state);
        if (error)
                acpi_target_sleep_state = ACPI_STATE_S0;

        return error;
}

/**
 *      acpi_pm_prepare - Prepare the platform to enter the target sleep
 *              state and disable the GPEs.
 */
static int acpi_pm_prepare(void)
{
        int error = __acpi_pm_prepare();
        if (!error)
                error = acpi_pm_pre_suspend();

        return error;
}

/**
 *      acpi_pm_finish - Instruct the platform to leave a sleep state.
 *
 *      This is called after we wake back up (or if entering the sleep state
 *      failed).
 */
static void acpi_pm_finish(void)
{
        struct acpi_device *pwr_btn_adev;
        u32 acpi_state = acpi_target_sleep_state;

        acpi_ec_unblock_transactions();
        suspend_nvs_free();

        if (acpi_state == ACPI_STATE_S0)
                return;

        printk(KERN_INFO PREFIX "Waking up from system sleep state S%d\n",
                acpi_state);
        acpi_disable_wakeup_devices(acpi_state);
        acpi_leave_sleep_state(acpi_state);

        /* reset firmware waking vector */
        acpi_set_waking_vector(0);

        acpi_target_sleep_state = ACPI_STATE_S0;

        acpi_resume_power_resources();

        /* If we were woken with the fixed power button, provide a small
         * hint to userspace in the form of a wakeup event on the fixed power
         * button device (if it can be found).
         *
         * We delay the event generation til now, as the PM layer requires
         * timekeeping to be running before we generate events. */
        if (!pwr_btn_event_pending)
                return;

        pwr_btn_event_pending = false;
        pwr_btn_adev = acpi_dev_get_first_match_dev(ACPI_BUTTON_HID_POWERF,
                                                    NULL, -1);
        if (pwr_btn_adev) {
                pm_wakeup_event(&pwr_btn_adev->dev, 0);
                acpi_dev_put(pwr_btn_adev);
        }
}

/**
 * acpi_pm_start - Start system PM transition.
 */
static void acpi_pm_start(u32 acpi_state)
{
        acpi_target_sleep_state = acpi_state;
        acpi_sleep_tts_switch(acpi_target_sleep_state);
        acpi_scan_lock_acquire();
}

/**
 * acpi_pm_end - Finish up system PM transition.
 */
static void acpi_pm_end(void)
{
        acpi_turn_off_unused_power_resources();
        acpi_scan_lock_release();
        /*
         * This is necessary in case acpi_pm_finish() is not called during a
         * failing transition to a sleep state.
         */
        acpi_target_sleep_state = ACPI_STATE_S0;
        acpi_sleep_tts_switch(acpi_target_sleep_state);
}
#else /* !CONFIG_ACPI_SLEEP */
#define sleep_no_lps0   (1)
#define acpi_target_sleep_state ACPI_STATE_S0
#define acpi_sleep_default_s3   (1)
static inline void acpi_sleep_dmi_check(void) {}
#endif /* CONFIG_ACPI_SLEEP */

#ifdef CONFIG_SUSPEND
static u32 acpi_suspend_states[] = {
        [PM_SUSPEND_ON] = ACPI_STATE_S0,
        [PM_SUSPEND_STANDBY] = ACPI_STATE_S1,
        [PM_SUSPEND_MEM] = ACPI_STATE_S3,
        [PM_SUSPEND_MAX] = ACPI_STATE_S5
};

/**
 *      acpi_suspend_begin - Set the target system sleep state to the state
 *              associated with given @pm_state, if supported.
 */
static int acpi_suspend_begin(suspend_state_t pm_state)
{
        u32 acpi_state = acpi_suspend_states[pm_state];
        int error;

        error = (nvs_nosave || nvs_nosave_s3) ? 0 : suspend_nvs_alloc();
        if (error)
                return error;

        if (!sleep_states[acpi_state]) {
                pr_err("ACPI does not support sleep state S%u\n", acpi_state);
                return -ENOSYS;
        }
        if (acpi_state > ACPI_STATE_S1)
                pm_set_suspend_via_firmware();

        acpi_pm_start(acpi_state);
        return 0;
}

/**
 *      acpi_suspend_enter - Actually enter a sleep state.
 *      @pm_state: ignored
 *
 *      Flush caches and go to sleep. For STR we have to call arch-specific
 *      assembly, which in turn call acpi_enter_sleep_state().
 *      It's unfortunate, but it works. Please fix if you're feeling frisky.
 */
static int acpi_suspend_enter(suspend_state_t pm_state)
{
        acpi_status status = AE_OK;
        u32 acpi_state = acpi_target_sleep_state;
        int error;

        ACPI_FLUSH_CPU_CACHE();

        trace_suspend_resume(TPS("acpi_suspend"), acpi_state, true);
        switch (acpi_state) {
        case ACPI_STATE_S1:
                barrier();
                status = acpi_enter_sleep_state(acpi_state);
                break;

        case ACPI_STATE_S3:
                if (!acpi_suspend_lowlevel)
                        return -ENOSYS;
                error = acpi_suspend_lowlevel();
                if (error)
                        return error;
                pr_info(PREFIX "Low-level resume complete\n");
                pm_set_resume_via_firmware();
                break;
        }
        trace_suspend_resume(TPS("acpi_suspend"), acpi_state, false);

        /* This violates the spec but is required for bug compatibility. */
        acpi_write_bit_register(ACPI_BITREG_SCI_ENABLE, 1);

        /* Reprogram control registers */
        acpi_leave_sleep_state_prep(acpi_state);

        /* ACPI 3.0 specs (P62) says that it's the responsibility
         * of the OSPM to clear the status bit [ implying that the
         * POWER_BUTTON event should not reach userspace ]
         *
         * However, we do generate a small hint for userspace in the form of
         * a wakeup event. We flag this condition for now and generate the
         * event later, as we're currently too early in resume to be able to
         * generate wakeup events.
         */
        if (ACPI_SUCCESS(status) && (acpi_state == ACPI_STATE_S3)) {
                acpi_event_status pwr_btn_status = ACPI_EVENT_FLAG_DISABLED;

                acpi_get_event_status(ACPI_EVENT_POWER_BUTTON, &pwr_btn_status);

                if (pwr_btn_status & ACPI_EVENT_FLAG_STATUS_SET) {
                        acpi_clear_event(ACPI_EVENT_POWER_BUTTON);
                        /* Flag for later */
                        pwr_btn_event_pending = true;
                }
        }

        /*
         * Disable and clear GPE status before interrupt is enabled. Some GPEs
         * (like wakeup GPE) haven't handler, this can avoid such GPE misfire.
         * acpi_leave_sleep_state will reenable specific GPEs later
         */
        acpi_disable_all_gpes();
        /* Allow EC transactions to happen. */
        acpi_ec_unblock_transactions();

        suspend_nvs_restore();

        return ACPI_SUCCESS(status) ? 0 : -EFAULT;
}

static int acpi_suspend_state_valid(suspend_state_t pm_state)
{
        u32 acpi_state;

        switch (pm_state) {
        case PM_SUSPEND_ON:
        case PM_SUSPEND_STANDBY:
        case PM_SUSPEND_MEM:
                acpi_state = acpi_suspend_states[pm_state];

                return sleep_states[acpi_state];
        default:
                return 0;
        }
}

static const struct platform_suspend_ops acpi_suspend_ops = {
        .valid = acpi_suspend_state_valid,
        .begin = acpi_suspend_begin,
        .prepare_late = acpi_pm_prepare,
        .enter = acpi_suspend_enter,
        .wake = acpi_pm_finish,
        .end = acpi_pm_end,
};

/**
 *      acpi_suspend_begin_old - Set the target system sleep state to the
 *              state associated with given @pm_state, if supported, and
 *              execute the _PTS control method.  This function is used if the
 *              pre-ACPI 2.0 suspend ordering has been requested.
 */
static int acpi_suspend_begin_old(suspend_state_t pm_state)
{
        int error = acpi_suspend_begin(pm_state);
        if (!error)
                error = __acpi_pm_prepare();

        return error;
}

/*
 * The following callbacks are used if the pre-ACPI 2.0 suspend ordering has
 * been requested.
 */
static const struct platform_suspend_ops acpi_suspend_ops_old = {
        .valid = acpi_suspend_state_valid,
        .begin = acpi_suspend_begin_old,
        .prepare_late = acpi_pm_pre_suspend,
        .enter = acpi_suspend_enter,
        .wake = acpi_pm_finish,
        .end = acpi_pm_end,
        .recover = acpi_pm_finish,
};

static bool s2idle_wakeup;

/*
 * On platforms supporting the Low Power S0 Idle interface there is an ACPI
 * device object with the PNP0D80 compatible device ID (System Power Management
 * Controller) and a specific _DSM method under it.  That method, if present,
 * can be used to indicate to the platform that the OS is transitioning into a
 * low-power state in which certain types of activity are not desirable or that
 * it is leaving such a state, which allows the platform to adjust its operation
 * mode accordingly.
 */
static const struct acpi_device_id lps0_device_ids[] = {
        {"PNP0D80", },
        {"", },
};

#define ACPI_LPS0_DSM_UUID      "c4eb40a0-6cd2-11e2-bcfd-0800200c9a66"

#define ACPI_LPS0_GET_DEVICE_CONSTRAINTS        1
#define ACPI_LPS0_SCREEN_OFF    3
#define ACPI_LPS0_SCREEN_ON     4
#define ACPI_LPS0_ENTRY         5
#define ACPI_LPS0_EXIT          6

static acpi_handle lps0_device_handle;
static guid_t lps0_dsm_guid;
static char lps0_dsm_func_mask;

/* Device constraint entry structure */
struct lpi_device_info {
        char *name;
        int enabled;
        union acpi_object *package;
};

/* Constraint package structure */
struct lpi_device_constraint {
        int uid;
        int min_dstate;
        int function_states;
};

struct lpi_constraints {
        acpi_handle handle;
        int min_dstate;
};

static struct lpi_constraints *lpi_constraints_table;
static int lpi_constraints_table_size;

static void lpi_device_get_constraints(void)
{
        union acpi_object *out_obj;
        int i;

        out_obj = acpi_evaluate_dsm_typed(lps0_device_handle, &lps0_dsm_guid,
                                          1, ACPI_LPS0_GET_DEVICE_CONSTRAINTS,
                                          NULL, ACPI_TYPE_PACKAGE);

        acpi_handle_debug(lps0_device_handle, "_DSM function 1 eval %s\n",
                          out_obj ? "successful" : "failed");

        if (!out_obj)
                return;

        lpi_constraints_table = kcalloc(out_obj->package.count,
                                        sizeof(*lpi_constraints_table),
                                        GFP_KERNEL);
        if (!lpi_constraints_table)
                goto free_acpi_buffer;

        acpi_handle_debug(lps0_device_handle, "LPI: constraints list begin:\n");

        for (i = 0; i < out_obj->package.count; i++) {
                struct lpi_constraints *constraint;
                acpi_status status;
                union acpi_object *package = &out_obj->package.elements[i];
                struct lpi_device_info info = { };
                int package_count = 0, j;

                if (!package)
                        continue;

                for (j = 0; j < package->package.count; ++j) {
                        union acpi_object *element =
                                        &(package->package.elements[j]);

                        switch (element->type) {
                        case ACPI_TYPE_INTEGER:
                                info.enabled = element->integer.value;
                                break;
                        case ACPI_TYPE_STRING:
                                info.name = element->string.pointer;
                                break;
                        case ACPI_TYPE_PACKAGE:
                                package_count = element->package.count;
                                info.package = element->package.elements;
                                break;
                        }
                }

                if (!info.enabled || !info.package || !info.name)
                        continue;

                constraint = &lpi_constraints_table[lpi_constraints_table_size];

                status = acpi_get_handle(NULL, info.name, &constraint->handle);
                if (ACPI_FAILURE(status))
                        continue;

                acpi_handle_debug(lps0_device_handle,
                                  "index:%d Name:%s\n", i, info.name);

                constraint->min_dstate = -1;

                for (j = 0; j < package_count; ++j) {
                        union acpi_object *info_obj = &info.package[j];
                        union acpi_object *cnstr_pkg;
                        union acpi_object *obj;
                        struct lpi_device_constraint dev_info;

                        switch (info_obj->type) {
                        case ACPI_TYPE_INTEGER:
                                /* version */
                                break;
                        case ACPI_TYPE_PACKAGE:
                                if (info_obj->package.count < 2)
                                        break;

                                cnstr_pkg = info_obj->package.elements;
                                obj = &cnstr_pkg[0];
                                dev_info.uid = obj->integer.value;
                                obj = &cnstr_pkg[1];
                                dev_info.min_dstate = obj->integer.value;

                                acpi_handle_debug(lps0_device_handle,
                                        "uid:%d min_dstate:%s\n",
                                        dev_info.uid,
                                        acpi_power_state_string(dev_info.min_dstate));

                                constraint->min_dstate = dev_info.min_dstate;
                                break;
                        }
                }

                if (constraint->min_dstate < 0) {
                        acpi_handle_debug(lps0_device_handle,
                                          "Incomplete constraint defined\n");
                        continue;
                }

                lpi_constraints_table_size++;
        }

        acpi_handle_debug(lps0_device_handle, "LPI: constraints list end\n");

free_acpi_buffer:
        ACPI_FREE(out_obj);
}

static void lpi_check_constraints(void)
{
        int i;

        for (i = 0; i < lpi_constraints_table_size; ++i) {
                acpi_handle handle = lpi_constraints_table[i].handle;
                struct acpi_device *adev;

                if (!handle || acpi_bus_get_device(handle, &adev))
                        continue;

                acpi_handle_debug(handle,
                        "LPI: required min power state:%s current power state:%s\n",
                        acpi_power_state_string(lpi_constraints_table[i].min_dstate),
                        acpi_power_state_string(adev->power.state));

                if (!adev->flags.power_manageable) {
                        acpi_handle_info(handle, "LPI: Device not power manageable\n");
                        lpi_constraints_table[i].handle = NULL;
                        continue;
                }

                if (adev->power.state < lpi_constraints_table[i].min_dstate)
                        acpi_handle_info(handle,
                                "LPI: Constraint not met; min power state:%s current power state:%s\n",
                                acpi_power_state_string(lpi_constraints_table[i].min_dstate),
                                acpi_power_state_string(adev->power.state));
        }
}

static void acpi_sleep_run_lps0_dsm(unsigned int func)
{
        union acpi_object *out_obj;

        if (!(lps0_dsm_func_mask & (1 << func)))
                return;

        out_obj = acpi_evaluate_dsm(lps0_device_handle, &lps0_dsm_guid, 1, func, NULL);
        ACPI_FREE(out_obj);

        acpi_handle_debug(lps0_device_handle, "_DSM function %u evaluation %s\n",
                          func, out_obj ? "successful" : "failed");
}

static int lps0_device_attach(struct acpi_device *adev,
                              const struct acpi_device_id *not_used)
{
        union acpi_object *out_obj;

        if (lps0_device_handle)
                return 0;

        if (!(acpi_gbl_FADT.flags & ACPI_FADT_LOW_POWER_S0))
                return 0;

        guid_parse(ACPI_LPS0_DSM_UUID, &lps0_dsm_guid);
        /* Check if the _DSM is present and as expected. */
        out_obj = acpi_evaluate_dsm(adev->handle, &lps0_dsm_guid, 1, 0, NULL);
        if (!out_obj || out_obj->type != ACPI_TYPE_BUFFER) {
                acpi_handle_debug(adev->handle,
                                  "_DSM function 0 evaluation failed\n");
                return 0;
        }

        lps0_dsm_func_mask = *(char *)out_obj->buffer.pointer;

        ACPI_FREE(out_obj);

        acpi_handle_debug(adev->handle, "_DSM function mask: 0x%x\n",
                          lps0_dsm_func_mask);

        lps0_device_handle = adev->handle;

        lpi_device_get_constraints();

        /*
         * Use suspend-to-idle by default if the default suspend mode was not
         * set from the command line.
         */
        if (mem_sleep_default > PM_SUSPEND_MEM && !acpi_sleep_default_s3)
                mem_sleep_current = PM_SUSPEND_TO_IDLE;

        /*
         * Some LPS0 systems, like ASUS Zenbook UX430UNR/i7-8550U, require the
         * EC GPE to be enabled while suspended for certain wakeup devices to
         * work, so mark it as wakeup-capable.
         */
        acpi_ec_mark_gpe_for_wake();

        return 0;
}

static struct acpi_scan_handler lps0_handler = {
        .ids = lps0_device_ids,
        .attach = lps0_device_attach,
};

static int acpi_s2idle_begin(void)
{
        acpi_scan_lock_acquire();
        return 0;
}

static int acpi_s2idle_prepare(void)
{
        if (acpi_sci_irq_valid()) {
                enable_irq_wake(acpi_sci_irq);
                acpi_ec_set_gpe_wake_mask(ACPI_GPE_ENABLE);
        }

        acpi_enable_wakeup_devices(ACPI_STATE_S0);

        /* Change the configuration of GPEs to avoid spurious wakeup. */
        acpi_enable_all_wakeup_gpes();
        acpi_os_wait_events_complete();

        s2idle_wakeup = true;
        return 0;
}

static int acpi_s2idle_prepare_late(void)
{
        if (!lps0_device_handle || sleep_no_lps0)
                return 0;

        if (pm_debug_messages_on)
                lpi_check_constraints();

        acpi_sleep_run_lps0_dsm(ACPI_LPS0_SCREEN_OFF);
        acpi_sleep_run_lps0_dsm(ACPI_LPS0_ENTRY);

        return 0;
}

static void acpi_s2idle_sync(void)
{
        /* The EC driver uses special workqueues that need to be flushed. */
        acpi_ec_flush_work();
        acpi_os_wait_events_complete(); /* synchronize Notify handling */
}

static bool acpi_s2idle_wake(void)
{
        if (!acpi_sci_irq_valid())
                return pm_wakeup_pending();

        while (pm_wakeup_pending()) {
                /*
                 * If IRQD_WAKEUP_ARMED is set for the SCI at this point, the
                 * SCI has not triggered while suspended, so bail out (the
                 * wakeup is pending anyway and the SCI is not the source of
                 * it).
                 */
                if (irqd_is_wakeup_armed(irq_get_irq_data(acpi_sci_irq)))
                        return true;

                /*
                 * If the status bit of any enabled fixed event is set, the
                 * wakeup is regarded as valid.
                 */
                if (acpi_any_fixed_event_status_set())
                        return true;

                /* Check wakeups from drivers sharing the SCI. */
                if (acpi_check_wakeup_handlers())
                        return true;

                /*
                 * If the status bit is set for any enabled GPE other than the
                 * EC one, the wakeup is regarded as a genuine one.
                 */
                if (acpi_ec_other_gpes_active())
                        return true;

                /*
                 * If the EC GPE status bit has not been set, the wakeup is
                 * regarded as a spurious one.
                 */
                if (!acpi_ec_dispatch_gpe())
                        return false;

                /*
                 * Cancel the wakeup and process all pending events in case
                 * there are any wakeup ones in there.
                 *
                 * Note that if any non-EC GPEs are active at this point, the
                 * SCI will retrigger after the rearming below, so no events
                 * should be missed by canceling the wakeup here.
                 */
                pm_system_cancel_wakeup();

                acpi_s2idle_sync();

                /*
                 * The SCI is in the "suspended" state now and it cannot produce
                 * new wakeup events till the rearming below, so if any of them
                 * are pending here, they must be resulting from the processing
                 * of EC events above or coming from somewhere else.
                 */
                if (pm_wakeup_pending())
                        return true;

                rearm_wake_irq(acpi_sci_irq);
        }

        return false;
}

static void acpi_s2idle_restore_early(void)
{
        if (!lps0_device_handle || sleep_no_lps0)
                return;

        acpi_sleep_run_lps0_dsm(ACPI_LPS0_EXIT);
        acpi_sleep_run_lps0_dsm(ACPI_LPS0_SCREEN_ON);
}

static void acpi_s2idle_restore(void)
{
        /*
         * Drain pending events before restoring the working-state configuration
         * of GPEs.
         */
        acpi_os_wait_events_complete(); /* synchronize GPE processing */
        acpi_s2idle_sync();

        s2idle_wakeup = false;

        acpi_enable_all_runtime_gpes();

        acpi_disable_wakeup_devices(ACPI_STATE_S0);

        if (acpi_sci_irq_valid()) {
                acpi_ec_set_gpe_wake_mask(ACPI_GPE_DISABLE);
                disable_irq_wake(acpi_sci_irq);
        }
}

static void acpi_s2idle_end(void)
{
        acpi_scan_lock_release();
}

static const struct platform_s2idle_ops acpi_s2idle_ops = {
        .begin = acpi_s2idle_begin,
        .prepare = acpi_s2idle_prepare,
        .prepare_late = acpi_s2idle_prepare_late,
        .wake = acpi_s2idle_wake,
        .restore_early = acpi_s2idle_restore_early,
        .restore = acpi_s2idle_restore,
        .end = acpi_s2idle_end,
};

static void acpi_sleep_suspend_setup(void)
{
        int i;

        for (i = ACPI_STATE_S1; i < ACPI_STATE_S4; i++)
                if (acpi_sleep_state_supported(i))
                        sleep_states[i] = 1;

        suspend_set_ops(old_suspend_ordering ?
                &acpi_suspend_ops_old : &acpi_suspend_ops);

        acpi_scan_add_handler(&lps0_handler);
        s2idle_set_ops(&acpi_s2idle_ops);
}

#else /* !CONFIG_SUSPEND */
#define s2idle_wakeup           (false)
#define lps0_device_handle      (NULL)
static inline void acpi_sleep_suspend_setup(void) {}
#endif /* !CONFIG_SUSPEND */

bool acpi_s2idle_wakeup(void)
{
        return s2idle_wakeup;
}

#ifdef CONFIG_PM_SLEEP
static u32 saved_bm_rld;

static int  acpi_save_bm_rld(void)
{
        acpi_read_bit_register(ACPI_BITREG_BUS_MASTER_RLD, &saved_bm_rld);
        return 0;
}

static void  acpi_restore_bm_rld(void)
{
        u32 resumed_bm_rld = 0;

        acpi_read_bit_register(ACPI_BITREG_BUS_MASTER_RLD, &resumed_bm_rld);
        if (resumed_bm_rld == saved_bm_rld)
                return;

        acpi_write_bit_register(ACPI_BITREG_BUS_MASTER_RLD, saved_bm_rld);
}

static struct syscore_ops acpi_sleep_syscore_ops = {
        .suspend = acpi_save_bm_rld,
        .resume = acpi_restore_bm_rld,
};

static void acpi_sleep_syscore_init(void)
{
        register_syscore_ops(&acpi_sleep_syscore_ops);
}
#else
static inline void acpi_sleep_syscore_init(void) {}
#endif /* CONFIG_PM_SLEEP */

#ifdef CONFIG_HIBERNATION
static unsigned long s4_hardware_signature;
static struct acpi_table_facs *facs;
static bool nosigcheck;

void __init acpi_no_s4_hw_signature(void)
{
        nosigcheck = true;
}

static int acpi_hibernation_begin(pm_message_t stage)
{
        if (!nvs_nosave) {
                int error = suspend_nvs_alloc();
                if (error)
                        return error;
        }

        if (stage.event == PM_EVENT_HIBERNATE)
                pm_set_suspend_via_firmware();

        acpi_pm_start(ACPI_STATE_S4);
        return 0;
}

static int acpi_hibernation_enter(void)
{
        acpi_status status = AE_OK;

        ACPI_FLUSH_CPU_CACHE();

        /* This shouldn't return.  If it returns, we have a problem */
        status = acpi_enter_sleep_state(ACPI_STATE_S4);
        /* Reprogram control registers */
        acpi_leave_sleep_state_prep(ACPI_STATE_S4);

        return ACPI_SUCCESS(status) ? 0 : -EFAULT;
}

static void acpi_hibernation_leave(void)
{
        pm_set_resume_via_firmware();
        /*
         * If ACPI is not enabled by the BIOS and the boot kernel, we need to
         * enable it here.
         */
        acpi_enable();
        /* Reprogram control registers */
        acpi_leave_sleep_state_prep(ACPI_STATE_S4);
        /* Check the hardware signature */
        if (facs && s4_hardware_signature != facs->hardware_signature)
                pr_crit("ACPI: Hardware changed while hibernated, success doubtful!\n");
        /* Restore the NVS memory area */
        suspend_nvs_restore();
        /* Allow EC transactions to happen. */
        acpi_ec_unblock_transactions();
}

static void acpi_pm_thaw(void)
{
        acpi_ec_unblock_transactions();
        acpi_enable_all_runtime_gpes();
}

static const struct platform_hibernation_ops acpi_hibernation_ops = {
        .begin = acpi_hibernation_begin,
        .end = acpi_pm_end,
        .pre_snapshot = acpi_pm_prepare,
        .finish = acpi_pm_finish,
        .prepare = acpi_pm_prepare,
        .enter = acpi_hibernation_enter,
        .leave = acpi_hibernation_leave,
        .pre_restore = acpi_pm_freeze,
        .restore_cleanup = acpi_pm_thaw,
};

/**
 *      acpi_hibernation_begin_old - Set the target system sleep state to
 *              ACPI_STATE_S4 and execute the _PTS control method.  This
 *              function is used if the pre-ACPI 2.0 suspend ordering has been
 *              requested.
 */
static int acpi_hibernation_begin_old(pm_message_t stage)
{
        int error;
        /*
         * The _TTS object should always be evaluated before the _PTS object.
         * When the old_suspended_ordering is true, the _PTS object is
         * evaluated in the acpi_sleep_prepare.
         */
        acpi_sleep_tts_switch(ACPI_STATE_S4);

        error = acpi_sleep_prepare(ACPI_STATE_S4);
        if (error)
                return error;

        if (!nvs_nosave) {
                error = suspend_nvs_alloc();
                if (error)
                        return error;
        }

        if (stage.event == PM_EVENT_HIBERNATE)
                pm_set_suspend_via_firmware();

        acpi_target_sleep_state = ACPI_STATE_S4;
        acpi_scan_lock_acquire();
        return 0;
}

/*
 * The following callbacks are used if the pre-ACPI 2.0 suspend ordering has
 * been requested.
 */
static const struct platform_hibernation_ops acpi_hibernation_ops_old = {
        .begin = acpi_hibernation_begin_old,
        .end = acpi_pm_end,
        .pre_snapshot = acpi_pm_pre_suspend,
        .prepare = acpi_pm_freeze,
        .finish = acpi_pm_finish,
        .enter = acpi_hibernation_enter,
        .leave = acpi_hibernation_leave,
        .pre_restore = acpi_pm_freeze,
        .restore_cleanup = acpi_pm_thaw,
        .recover = acpi_pm_finish,
};

static void acpi_sleep_hibernate_setup(void)
{
        if (!acpi_sleep_state_supported(ACPI_STATE_S4))
                return;

        hibernation_set_ops(old_suspend_ordering ?
                        &acpi_hibernation_ops_old : &acpi_hibernation_ops);
        sleep_states[ACPI_STATE_S4] = 1;
        if (nosigcheck)
                return;

        acpi_get_table(ACPI_SIG_FACS, 1, (struct acpi_table_header **)&facs);
        if (facs)
                s4_hardware_signature = facs->hardware_signature;
}
#else /* !CONFIG_HIBERNATION */
static inline void acpi_sleep_hibernate_setup(void) {}
#endif /* !CONFIG_HIBERNATION */

static void acpi_power_off_prepare(void)
{
        /* Prepare to power off the system */
        acpi_sleep_prepare(ACPI_STATE_S5);
        acpi_disable_all_gpes();
        acpi_os_wait_events_complete();
}

static void acpi_power_off(void)
{
        /* acpi_sleep_prepare(ACPI_STATE_S5) should have already been called */
        printk(KERN_DEBUG "%s called\n", __func__);
        local_irq_disable();
        acpi_enter_sleep_state(ACPI_STATE_S5);
}

int __init acpi_sleep_init(void)
{
        char supported[ACPI_S_STATE_COUNT * 3 + 1];
        char *pos = supported;
        int i;

        acpi_sleep_dmi_check();

        sleep_states[ACPI_STATE_S0] = 1;

        acpi_sleep_syscore_init();
        acpi_sleep_suspend_setup();
        acpi_sleep_hibernate_setup();

        if (acpi_sleep_state_supported(ACPI_STATE_S5)) {
                sleep_states[ACPI_STATE_S5] = 1;
                pm_power_off_prepare = acpi_power_off_prepare;
                pm_power_off = acpi_power_off;
        } else {
                acpi_no_s5 = true;
        }

        supported[0] = 0;
        for (i = 0; i < ACPI_S_STATE_COUNT; i++) {
                if (sleep_states[i])
                        pos += sprintf(pos, " S%d", i);
        }
        pr_info(PREFIX "(supports%s)\n", supported);

        /*
         * Register the tts_notifier to reboot notifier list so that the _TTS
         * object can also be evaluated when the system enters S5.
         */
        register_reboot_notifier(&tts_notifier);
        return 0;
}