drivers/cpufreq/maple-cpufreq.c

   1 /*
   2  *  Copyright (C) 2011 Dmitry Eremin-Solenikov
   3  *  Copyright (C) 2002 - 2005 Benjamin Herrenschmidt <benh@kernel.crashing.org>
   4  *  and                       Markus Demleitner <msdemlei@cl.uni-heidelberg.de>
   5  *
   6  * This program is free software; you can redistribute it and/or modify
   7  * it under the terms of the GNU General Public License version 2 as
   8  * published by the Free Software Foundation.
   9  *
  10  * This driver adds basic cpufreq support for SMU & 970FX based G5 Macs,
  11  * that is iMac G5 and latest single CPU desktop.
  12  */
  13
  14 #undef DEBUG
  15
  16 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
  17
  18 #include <linux/module.h>
  19 #include <linux/types.h>
  20 #include <linux/errno.h>
  21 #include <linux/kernel.h>
  22 #include <linux/delay.h>
  23 #include <linux/sched.h>
  24 #include <linux/cpufreq.h>
  25 #include <linux/init.h>
  26 #include <linux/completion.h>
  27 #include <linux/mutex.h>
  28 #include <linux/time.h>
  29 #include <linux/of_device.h>
  30
  31 #define DBG(fmt...) pr_debug(fmt)
  32
  33 /* see 970FX user manual */
  34
  35 #define SCOM_PCR 0x0aa001                       /* PCR scom addr */
  36
  37 #define PCR_HILO_SELECT         0x80000000U     /* 1 = PCR, 0 = PCRH */
  38 #define PCR_SPEED_FULL          0x00000000U     /* 1:1 speed value */
  39 #define PCR_SPEED_HALF          0x00020000U     /* 1:2 speed value */
  40 #define PCR_SPEED_QUARTER       0x00040000U     /* 1:4 speed value */
  41 #define PCR_SPEED_MASK          0x000e0000U     /* speed mask */
  42 #define PCR_SPEED_SHIFT         17
  43 #define PCR_FREQ_REQ_VALID      0x00010000U     /* freq request valid */
  44 #define PCR_VOLT_REQ_VALID      0x00008000U     /* volt request valid */
  45 #define PCR_TARGET_TIME_MASK    0x00006000U     /* target time */
  46 #define PCR_STATLAT_MASK        0x00001f00U     /* STATLAT value */
  47 #define PCR_SNOOPLAT_MASK       0x000000f0U     /* SNOOPLAT value */
  48 #define PCR_SNOOPACC_MASK       0x0000000fU     /* SNOOPACC value */
  49
  50 #define SCOM_PSR 0x408001                       /* PSR scom addr */
  51 /* warning: PSR is a 64 bits register */
  52 #define PSR_CMD_RECEIVED        0x2000000000000000U   /* command received */
  53 #define PSR_CMD_COMPLETED       0x1000000000000000U   /* command completed */
  54 #define PSR_CUR_SPEED_MASK      0x0300000000000000U   /* current speed */
  55 #define PSR_CUR_SPEED_SHIFT     (56)
  56
  57 /*
  58  * The G5 only supports two frequencies (Quarter speed is not supported)
  59  */
  60 #define CPUFREQ_HIGH                  0
  61 #define CPUFREQ_LOW                   1
  62
  63 static struct cpufreq_frequency_table maple_cpu_freqs[] = {
  64         {0, CPUFREQ_HIGH,               0},
  65         {0, CPUFREQ_LOW,                0},
  66         {0, 0,                          CPUFREQ_TABLE_END},
  67 };
  68
  69 /* Power mode data is an array of the 32 bits PCR values to use for
  70  * the various frequencies, retrieved from the device-tree
  71  */
  72 static int maple_pmode_cur;
  73
  74 static const u32 *maple_pmode_data;
  75 static int maple_pmode_max;
  76
  77 /*
  78  * SCOM based frequency switching for 970FX rev3
  79  */
  80 static int maple_scom_switch_freq(int speed_mode)
  81 {
  82         unsigned long flags;
  83         int to;
  84
  85         local_irq_save(flags);
  86
  87         /* Clear PCR high */
  88         scom970_write(SCOM_PCR, 0);
  89         /* Clear PCR low */
  90         scom970_write(SCOM_PCR, PCR_HILO_SELECT | 0);
  91         /* Set PCR low */
  92         scom970_write(SCOM_PCR, PCR_HILO_SELECT |
  93                       maple_pmode_data[speed_mode]);
  94
  95         /* Wait for completion */
  96         for (to = 0; to < 10; to++) {
  97                 unsigned long psr = scom970_read(SCOM_PSR);
  98
  99                 if ((psr & PSR_CMD_RECEIVED) == 0 &&
 100                     (((psr >> PSR_CUR_SPEED_SHIFT) ^
 101                       (maple_pmode_data[speed_mode] >> PCR_SPEED_SHIFT)) & 0x3)
 102                     == 0)
 103                         break;
 104                 if (psr & PSR_CMD_COMPLETED)
 105                         break;
 106                 udelay(100);
 107         }
 108
 109         local_irq_restore(flags);
 110
 111         maple_pmode_cur = speed_mode;
 112         ppc_proc_freq = maple_cpu_freqs[speed_mode].frequency * 1000ul;
 113
 114         return 0;
 115 }
 116
 117 static int maple_scom_query_freq(void)
 118 {
 119         unsigned long psr = scom970_read(SCOM_PSR);
 120         int i;
 121
 122         for (i = 0; i <= maple_pmode_max; i++)
 123                 if ((((psr >> PSR_CUR_SPEED_SHIFT) ^
 124                       (maple_pmode_data[i] >> PCR_SPEED_SHIFT)) & 0x3) == 0)
 125                         break;
 126         return i;
 127 }
 128
 129 /*
 130  * Common interface to the cpufreq core
 131  */
 132
 133 static int maple_cpufreq_target(struct cpufreq_policy *policy,
 134         unsigned int index)
 135 {
 136         return maple_scom_switch_freq(index);
 137 }
 138
 139 static unsigned int maple_cpufreq_get_speed(unsigned int cpu)
 140 {
 141         return maple_cpu_freqs[maple_pmode_cur].frequency;
 142 }
 143
 144 static int maple_cpufreq_cpu_init(struct cpufreq_policy *policy)
 145 {
 146         return cpufreq_generic_init(policy, maple_cpu_freqs, 12000);
 147 }
 148
 149 static struct cpufreq_driver maple_cpufreq_driver = {
 150         .name           = "maple",
 151         .flags          = CPUFREQ_CONST_LOOPS,
 152         .init           = maple_cpufreq_cpu_init,
 153         .verify         = cpufreq_generic_frequency_table_verify,
 154         .target_index   = maple_cpufreq_target,
 155         .get            = maple_cpufreq_get_speed,
 156         .attr           = cpufreq_generic_attr,
 157 };
 158
 159 static int __init maple_cpufreq_init(void)
 160 {
 161         struct device_node *cpunode;
 162         unsigned int psize;
 163         unsigned long max_freq;
 164         const u32 *valp;
 165         u32 pvr_hi;
 166         int rc = -ENODEV;
 167
 168         /*
 169          * Behave here like powermac driver which checks machine compatibility
 170          * to ease merging of two drivers in future.
 171          */
 172         if (!of_machine_is_compatible("Momentum,Maple") &&
 173             !of_machine_is_compatible("Momentum,Apache"))
 174                 return 0;
 175
 176         /* Get first CPU node */
 177         cpunode = of_cpu_device_node_get(0);
 178         if (cpunode == NULL) {
 179                 pr_err("Can't find any CPU 0 node\n");
 180                 goto bail_noprops;
 181         }
 182
 183         /* Check 970FX for now */
 184         /* we actually don't care on which CPU to access PVR */
 185         pvr_hi = PVR_VER(mfspr(SPRN_PVR));
 186         if (pvr_hi != 0x3c && pvr_hi != 0x44) {
 187                 pr_err("Unsupported CPU version (%x)\n", pvr_hi);
 188                 goto bail_noprops;
 189         }
 190
 191         /* Look for the powertune data in the device-tree */
 192         /*
 193          * On Maple this property is provided by PIBS in dual-processor config,
 194          * not provided by PIBS in CPU0 config and also not provided by SLOF,
 195          * so YMMV
 196          */
 197         maple_pmode_data = of_get_property(cpunode, "power-mode-data", &psize);
 198         if (!maple_pmode_data) {
 199                 DBG("No power-mode-data !\n");
 200                 goto bail_noprops;
 201         }
 202         maple_pmode_max = psize / sizeof(u32) - 1;
 203
 204         /*
 205          * From what I see, clock-frequency is always the maximal frequency.
 206          * The current driver can not slew sysclk yet, so we really only deal
 207          * with powertune steps for now. We also only implement full freq and
 208          * half freq in this version. So far, I haven't yet seen a machine
 209          * supporting anything else.
 210          */
 211         valp = of_get_property(cpunode, "clock-frequency", NULL);
 212         if (!valp)
 213                 goto bail_noprops;
 214         max_freq = (*valp)/1000;
 215         maple_cpu_freqs[0].frequency = max_freq;
 216         maple_cpu_freqs[1].frequency = max_freq/2;
 217
 218         /* Force apply current frequency to make sure everything is in
 219          * sync (voltage is right for example). Firmware may leave us with
 220          * a strange setting ...
 221          */
 222         msleep(10);
 223         maple_pmode_cur = -1;
 224         maple_scom_switch_freq(maple_scom_query_freq());
 225
 226         pr_info("Registering Maple CPU frequency driver\n");
 227         pr_info("Low: %d Mhz, High: %d Mhz, Cur: %d MHz\n",
 228                 maple_cpu_freqs[1].frequency/1000,
 229                 maple_cpu_freqs[0].frequency/1000,
 230                 maple_cpu_freqs[maple_pmode_cur].frequency/1000);
 231
 232         rc = cpufreq_register_driver(&maple_cpufreq_driver);
 233
 234 bail_noprops:
 235         of_node_put(cpunode);
 236
 237         return rc;
 238 }
 239
 240 module_init(maple_cpufreq_init);
 241
 242
 243 MODULE_LICENSE("GPL");