drivers/i2c/soft_i2c.c

   1 /*
   2  * (C) Copyright 2001, 2002
   3  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
   4  *
   5  * See file CREDITS for list of people who contributed to this
   6  * project.
   7  *
   8  * This program is free software; you can redistribute it and/or
   9  * modify it under the terms of the GNU General Public License as
  10  * published by the Free Software Foundation; either version 2 of
  11  * the License, or (at your option) any later version.
  12  *
  13  * This program is distributed in the hope that it will be useful,
  14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  16  * GNU General Public License for more details.
  17  *
  18  * You should have received a copy of the GNU General Public License
  19  * along with this program; if not, write to the Free Software
  20  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  21  * MA 02111-1307 USA
  22  *
  23  * This has been changed substantially by Gerald Van Baren, Custom IDEAS,
  24  * vanbaren@cideas.com.  It was heavily influenced by LiMon, written by
  25  * Neil Russell.
  26  */
  27
  28 #include <common.h>
  29 #ifdef  CONFIG_MPC8260                  /* only valid for MPC8260 */
  30 #include <ioports.h>
  31 #endif
  32 #ifdef  CONFIG_AT91RM9200               /* need this for the at91rm9200 */
  33 #include <asm/io.h>
  34 #include <asm/arch/hardware.h>
  35 #endif
  36 #ifdef  CONFIG_IXP425                   /* only valid for IXP425 */
  37 #include <asm/arch/ixp425.h>
  38 #endif
  39 #ifdef CONFIG_LPC2292
  40 #include <asm/arch/hardware.h>
  41 #endif
  42 #include <i2c.h>
  43
  44 /* #define      DEBUG_I2C       */
  45
  46 #ifdef DEBUG_I2C
  47 DECLARE_GLOBAL_DATA_PTR;
  48 #endif
  49
  50
  51 /*-----------------------------------------------------------------------
  52  * Definitions
  53  */
  54
  55 #define RETRIES         0
  56
  57
  58 #define I2C_ACK         0               /* PD_SDA level to ack a byte */
  59 #define I2C_NOACK       1               /* PD_SDA level to noack a byte */
  60
  61
  62 #ifdef DEBUG_I2C
  63 #define PRINTD(fmt,args...)     do {    \
  64         if (gd->have_console)           \
  65                 printf (fmt ,##args);   \
  66         } while (0)
  67 #else
  68 #define PRINTD(fmt,args...)
  69 #endif
  70
  71 #if defined(CONFIG_I2C_MULTI_BUS)
  72 static unsigned int i2c_bus_num __attribute__ ((section ("data"))) = 0;
  73 #endif /* CONFIG_I2C_MULTI_BUS */
  74
  75 /*-----------------------------------------------------------------------
  76  * Local functions
  77  */
  78 #if !defined(CONFIG_SYS_I2C_INIT_BOARD)
  79 static void  send_reset (void);
  80 #endif
  81 static void  send_start (void);
  82 static void  send_stop  (void);
  83 static void  send_ack   (int);
  84 static int   write_byte (uchar byte);
  85 static uchar read_byte  (int);
  86
  87 #if !defined(CONFIG_SYS_I2C_INIT_BOARD)
  88 /*-----------------------------------------------------------------------
  89  * Send a reset sequence consisting of 9 clocks with the data signal high
  90  * to clock any confused device back into an idle state.  Also send a
  91  * <stop> at the end of the sequence for belts & suspenders.
  92  */
  93 static void send_reset(void)
  94 {
  95         I2C_SOFT_DECLARATIONS   /* intentional without ';' */
  96         int j;
  97
  98         I2C_SCL(1);
  99         I2C_SDA(1);
 100 #ifdef  I2C_INIT
 101         I2C_INIT;
 102 #endif
 103         I2C_TRISTATE;
 104         for(j = 0; j < 9; j++) {
 105                 I2C_SCL(0);
 106                 I2C_DELAY;
 107                 I2C_DELAY;
 108                 I2C_SCL(1);
 109                 I2C_DELAY;
 110                 I2C_DELAY;
 111         }
 112         send_stop();
 113         I2C_TRISTATE;
 114 }
 115 #endif
 116
 117 /*-----------------------------------------------------------------------
 118  * START: High -> Low on SDA while SCL is High
 119  */
 120 static void send_start(void)
 121 {
 122         I2C_SOFT_DECLARATIONS   /* intentional without ';' */
 123
 124         I2C_DELAY;
 125         I2C_SDA(1);
 126         I2C_ACTIVE;
 127         I2C_DELAY;
 128         I2C_SCL(1);
 129         I2C_DELAY;
 130         I2C_SDA(0);
 131         I2C_DELAY;
 132 }
 133
 134 /*-----------------------------------------------------------------------
 135  * STOP: Low -> High on SDA while SCL is High
 136  */
 137 static void send_stop(void)
 138 {
 139         I2C_SOFT_DECLARATIONS   /* intentional without ';' */
 140
 141         I2C_SCL(0);
 142         I2C_DELAY;
 143         I2C_SDA(0);
 144         I2C_ACTIVE;
 145         I2C_DELAY;
 146         I2C_SCL(1);
 147         I2C_DELAY;
 148         I2C_SDA(1);
 149         I2C_DELAY;
 150         I2C_TRISTATE;
 151 }
 152
 153
 154 /*-----------------------------------------------------------------------
 155  * ack should be I2C_ACK or I2C_NOACK
 156  */
 157 static void send_ack(int ack)
 158 {
 159         I2C_SOFT_DECLARATIONS   /* intentional without ';' */
 160
 161         I2C_SCL(0);
 162         I2C_DELAY;
 163         I2C_ACTIVE;
 164         I2C_SDA(ack);
 165         I2C_DELAY;
 166         I2C_SCL(1);
 167         I2C_DELAY;
 168         I2C_DELAY;
 169         I2C_SCL(0);
 170         I2C_DELAY;
 171 }
 172
 173
 174 /*-----------------------------------------------------------------------
 175  * Send 8 bits and look for an acknowledgement.
 176  */
 177 static int write_byte(uchar data)
 178 {
 179         I2C_SOFT_DECLARATIONS   /* intentional without ';' */
 180         int j;
 181         int nack;
 182
 183         I2C_ACTIVE;
 184         for(j = 0; j < 8; j++) {
 185                 I2C_SCL(0);
 186                 I2C_DELAY;
 187                 I2C_SDA(data & 0x80);
 188                 I2C_DELAY;
 189                 I2C_SCL(1);
 190                 I2C_DELAY;
 191                 I2C_DELAY;
 192
 193                 data <<= 1;
 194         }
 195
 196         /*
 197          * Look for an <ACK>(negative logic) and return it.
 198          */
 199         I2C_SCL(0);
 200         I2C_DELAY;
 201         I2C_SDA(1);
 202         I2C_TRISTATE;
 203         I2C_DELAY;
 204         I2C_SCL(1);
 205         I2C_DELAY;
 206         I2C_DELAY;
 207         nack = I2C_READ;
 208         I2C_SCL(0);
 209         I2C_DELAY;
 210         I2C_ACTIVE;
 211
 212         return(nack);   /* not a nack is an ack */
 213 }
 214
 215 #if defined(CONFIG_I2C_MULTI_BUS)
 216 /*
 217  * Functions for multiple I2C bus handling
 218  */
 219 unsigned int i2c_get_bus_num(void)
 220 {
 221         return i2c_bus_num;
 222 }
 223
 224 int i2c_set_bus_num(unsigned int bus)
 225 {
 226 #if defined(CONFIG_I2C_MUX)
 227         if (bus < CONFIG_SYS_MAX_I2C_BUS) {
 228                 i2c_bus_num = bus;
 229         } else {
 230                 int     ret;
 231
 232                 ret = i2x_mux_select_mux(bus);
 233                 if (ret == 0)
 234                         i2c_bus_num = bus;
 235                 else
 236                         return ret;
 237         }
 238 #else
 239         if (bus >= CONFIG_SYS_MAX_I2C_BUS)
 240                 return -1;
 241         i2c_bus_num = bus;
 242 #endif
 243         return 0;
 244 }
 245
 246 /* TODO: add 100/400k switching */
 247 unsigned int i2c_get_bus_speed(void)
 248 {
 249         return CONFIG_SYS_I2C_SPEED;
 250 }
 251
 252 int i2c_set_bus_speed(unsigned int speed)
 253 {
 254         if (speed != CONFIG_SYS_I2C_SPEED)
 255                 return -1;
 256
 257         return 0;
 258 }
 259 #endif
 260
 261 /*-----------------------------------------------------------------------
 262  * if ack == I2C_ACK, ACK the byte so can continue reading, else
 263  * send I2C_NOACK to end the read.
 264  */
 265 static uchar read_byte(int ack)
 266 {
 267         I2C_SOFT_DECLARATIONS   /* intentional without ';' */
 268         int  data;
 269         int  j;
 270
 271         /*
 272          * Read 8 bits, MSB first.
 273          */
 274         I2C_TRISTATE;
 275         I2C_SDA(1);
 276         data = 0;
 277         for(j = 0; j < 8; j++) {
 278                 I2C_SCL(0);
 279                 I2C_DELAY;
 280                 I2C_SCL(1);
 281                 I2C_DELAY;
 282                 data <<= 1;
 283                 data |= I2C_READ;
 284                 I2C_DELAY;
 285         }
 286         send_ack(ack);
 287
 288         return(data);
 289 }
 290
 291 /*=====================================================================*/
 292 /*                         Public Functions                            */
 293 /*=====================================================================*/
 294
 295 /*-----------------------------------------------------------------------
 296  * Initialization
 297  */
 298 void i2c_init (int speed, int slaveaddr)
 299 {
 300 #if defined(CONFIG_SYS_I2C_INIT_BOARD)
 301         /* call board specific i2c bus reset routine before accessing the   */
 302         /* environment, which might be in a chip on that bus. For details   */
 303         /* about this problem see doc/I2C_Edge_Conditions.                  */
 304         i2c_init_board();
 305 #else
 306         /*
 307          * WARNING: Do NOT save speed in a static variable: if the
 308          * I2C routines are called before RAM is initialized (to read
 309          * the DIMM SPD, for instance), RAM won't be usable and your
 310          * system will crash.
 311          */
 312         send_reset ();
 313 #endif
 314 }
 315
 316 /*-----------------------------------------------------------------------
 317  * Probe to see if a chip is present.  Also good for checking for the
 318  * completion of EEPROM writes since the chip stops responding until
 319  * the write completes (typically 10mSec).
 320  */
 321 int i2c_probe(uchar addr)
 322 {
 323         int rc;
 324
 325         /*
 326          * perform 1 byte write transaction with just address byte
 327          * (fake write)
 328          */
 329         send_start();
 330         rc = write_byte ((addr << 1) | 0);
 331         send_stop();
 332
 333         return (rc ? 1 : 0);
 334 }
 335
 336 /*-----------------------------------------------------------------------
 337  * Read bytes
 338  */
 339 int  i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
 340 {
 341         int shift;
 342         PRINTD("i2c_read: chip %02X addr %02X alen %d buffer %p len %d\n",
 343                 chip, addr, alen, buffer, len);
 344
 345 #ifdef CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW
 346         /*
 347          * EEPROM chips that implement "address overflow" are ones
 348          * like Catalyst 24WC04/08/16 which has 9/10/11 bits of
 349          * address and the extra bits end up in the "chip address"
 350          * bit slots. This makes a 24WC08 (1Kbyte) chip look like
 351          * four 256 byte chips.
 352          *
 353          * Note that we consider the length of the address field to
 354          * still be one byte because the extra address bits are
 355          * hidden in the chip address.
 356          */
 357         chip |= ((addr >> (alen * 8)) & CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW);
 358
 359         PRINTD("i2c_read: fix addr_overflow: chip %02X addr %02X\n",
 360                 chip, addr);
 361 #endif
 362
 363         /*
 364          * Do the addressing portion of a write cycle to set the
 365          * chip's address pointer.  If the address length is zero,
 366          * don't do the normal write cycle to set the address pointer,
 367          * there is no address pointer in this chip.
 368          */
 369         send_start();
 370         if(alen > 0) {
 371                 if(write_byte(chip << 1)) {     /* write cycle */
 372                         send_stop();
 373                         PRINTD("i2c_read, no chip responded %02X\n", chip);
 374                         return(1);
 375                 }
 376                 shift = (alen-1) * 8;
 377                 while(alen-- > 0) {
 378                         if(write_byte(addr >> shift)) {
 379                                 PRINTD("i2c_read, address not <ACK>ed\n");
 380                                 return(1);
 381                         }
 382                         shift -= 8;
 383                 }
 384                 send_stop();    /* reportedly some chips need a full stop */
 385                 send_start();
 386         }
 387         /*
 388          * Send the chip address again, this time for a read cycle.
 389          * Then read the data.  On the last byte, we do a NACK instead
 390          * of an ACK(len == 0) to terminate the read.
 391          */
 392         write_byte((chip << 1) | 1);    /* read cycle */
 393         while(len-- > 0) {
 394                 *buffer++ = read_byte(len == 0);
 395         }
 396         send_stop();
 397         return(0);
 398 }
 399
 400 /*-----------------------------------------------------------------------
 401  * Write bytes
 402  */
 403 int  i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len)
 404 {
 405         int shift, failures = 0;
 406
 407         PRINTD("i2c_write: chip %02X addr %02X alen %d buffer %p len %d\n",
 408                 chip, addr, alen, buffer, len);
 409
 410         send_start();
 411         if(write_byte(chip << 1)) {     /* write cycle */
 412                 send_stop();
 413                 PRINTD("i2c_write, no chip responded %02X\n", chip);
 414                 return(1);
 415         }
 416         shift = (alen-1) * 8;
 417         while(alen-- > 0) {
 418                 if(write_byte(addr >> shift)) {
 419                         PRINTD("i2c_write, address not <ACK>ed\n");
 420                         return(1);
 421                 }
 422                 shift -= 8;
 423         }
 424
 425         while(len-- > 0) {
 426                 if(write_byte(*buffer++)) {
 427                         failures++;
 428                 }
 429         }
 430         send_stop();
 431         return(failures);
 432 }
 433
 434 /*-----------------------------------------------------------------------
 435  * Read a register
 436  */
 437 uchar i2c_reg_read(uchar i2c_addr, uchar reg)
 438 {
 439         uchar buf;
 440
 441         i2c_read(i2c_addr, reg, 1, &buf, 1);
 442
 443         return(buf);
 444 }
 445
 446 /*-----------------------------------------------------------------------
 447  * Write a register
 448  */
 449 void i2c_reg_write(uchar i2c_addr, uchar reg, uchar val)
 450 {
 451         i2c_write(i2c_addr, reg, 1, &val, 1);
 452 }