drivers/media/platform/davinci/dm355_ccdc.c

   1 // SPDX-License-Identifier: GPL-2.0-or-later
   2 /*
   3  * Copyright (C) 2005-2009 Texas Instruments Inc
   4  *
   5  * CCDC hardware module for DM355
   6  * ------------------------------
   7  *
   8  * This module is for configuring DM355 CCD controller of VPFE to capture
   9  * Raw yuv or Bayer RGB data from a decoder. CCDC has several modules
  10  * such as Defect Pixel Correction, Color Space Conversion etc to
  11  * pre-process the Bayer RGB data, before writing it to SDRAM.
  12  *
  13  * TODO: 1) Raw bayer parameter settings and bayer capture
  14  *       2) Split module parameter structure to module specific ioctl structs
  15  *       3) add support for lense shading correction
  16  *       4) investigate if enum used for user space type definition
  17  *          to be replaced by #defines or integer
  18  */
  19 #include <linux/platform_device.h>
  20 #include <linux/uaccess.h>
  21 #include <linux/videodev2.h>
  22 #include <linux/err.h>
  23 #include <linux/module.h>
  24
  25 #include <media/davinci/dm355_ccdc.h>
  26 #include <media/davinci/vpss.h>
  27
  28 #include "dm355_ccdc_regs.h"
  29 #include "ccdc_hw_device.h"
  30
  31 MODULE_LICENSE("GPL");
  32 MODULE_DESCRIPTION("CCDC Driver for DM355");
  33 MODULE_AUTHOR("Texas Instruments");
  34
  35 static struct ccdc_oper_config {
  36         struct device *dev;
  37         /* CCDC interface type */
  38         enum vpfe_hw_if_type if_type;
  39         /* Raw Bayer configuration */
  40         struct ccdc_params_raw bayer;
  41         /* YCbCr configuration */
  42         struct ccdc_params_ycbcr ycbcr;
  43         /* ccdc base address */
  44         void __iomem *base_addr;
  45 } ccdc_cfg = {
  46         /* Raw configurations */
  47         .bayer = {
  48                 .pix_fmt = CCDC_PIXFMT_RAW,
  49                 .frm_fmt = CCDC_FRMFMT_PROGRESSIVE,
  50                 .win = CCDC_WIN_VGA,
  51                 .fid_pol = VPFE_PINPOL_POSITIVE,
  52                 .vd_pol = VPFE_PINPOL_POSITIVE,
  53                 .hd_pol = VPFE_PINPOL_POSITIVE,
  54                 .gain = {
  55                         .r_ye = 256,
  56                         .gb_g = 256,
  57                         .gr_cy = 256,
  58                         .b_mg = 256
  59                 },
  60                 .config_params = {
  61                         .datasft = 2,
  62                         .mfilt1 = CCDC_NO_MEDIAN_FILTER1,
  63                         .mfilt2 = CCDC_NO_MEDIAN_FILTER2,
  64                         .alaw = {
  65                                 .gamma_wd = 2,
  66                         },
  67                         .blk_clamp = {
  68                                 .sample_pixel = 1,
  69                                 .dc_sub = 25
  70                         },
  71                         .col_pat_field0 = {
  72                                 .olop = CCDC_GREEN_BLUE,
  73                                 .olep = CCDC_BLUE,
  74                                 .elop = CCDC_RED,
  75                                 .elep = CCDC_GREEN_RED
  76                         },
  77                         .col_pat_field1 = {
  78                                 .olop = CCDC_GREEN_BLUE,
  79                                 .olep = CCDC_BLUE,
  80                                 .elop = CCDC_RED,
  81                                 .elep = CCDC_GREEN_RED
  82                         },
  83                 },
  84         },
  85         /* YCbCr configuration */
  86         .ycbcr = {
  87                 .win = CCDC_WIN_PAL,
  88                 .pix_fmt = CCDC_PIXFMT_YCBCR_8BIT,
  89                 .frm_fmt = CCDC_FRMFMT_INTERLACED,
  90                 .fid_pol = VPFE_PINPOL_POSITIVE,
  91                 .vd_pol = VPFE_PINPOL_POSITIVE,
  92                 .hd_pol = VPFE_PINPOL_POSITIVE,
  93                 .bt656_enable = 1,
  94                 .pix_order = CCDC_PIXORDER_CBYCRY,
  95                 .buf_type = CCDC_BUFTYPE_FLD_INTERLEAVED
  96         },
  97 };
  98
  99
 100 /* Raw Bayer formats */
 101 static u32 ccdc_raw_bayer_pix_formats[] =
 102                 {V4L2_PIX_FMT_SBGGR8, V4L2_PIX_FMT_SBGGR16};
 103
 104 /* Raw YUV formats */
 105 static u32 ccdc_raw_yuv_pix_formats[] =
 106                 {V4L2_PIX_FMT_UYVY, V4L2_PIX_FMT_YUYV};
 107
 108 /* register access routines */
 109 static inline u32 regr(u32 offset)
 110 {
 111         return __raw_readl(ccdc_cfg.base_addr + offset);
 112 }
 113
 114 static inline void regw(u32 val, u32 offset)
 115 {
 116         __raw_writel(val, ccdc_cfg.base_addr + offset);
 117 }
 118
 119 static void ccdc_enable(int en)
 120 {
 121         unsigned int temp;
 122         temp = regr(SYNCEN);
 123         temp &= (~CCDC_SYNCEN_VDHDEN_MASK);
 124         temp |= (en & CCDC_SYNCEN_VDHDEN_MASK);
 125         regw(temp, SYNCEN);
 126 }
 127
 128 static void ccdc_enable_output_to_sdram(int en)
 129 {
 130         unsigned int temp;
 131         temp = regr(SYNCEN);
 132         temp &= (~(CCDC_SYNCEN_WEN_MASK));
 133         temp |= ((en << CCDC_SYNCEN_WEN_SHIFT) & CCDC_SYNCEN_WEN_MASK);
 134         regw(temp, SYNCEN);
 135 }
 136
 137 static void ccdc_config_gain_offset(void)
 138 {
 139         /* configure gain */
 140         regw(ccdc_cfg.bayer.gain.r_ye, RYEGAIN);
 141         regw(ccdc_cfg.bayer.gain.gr_cy, GRCYGAIN);
 142         regw(ccdc_cfg.bayer.gain.gb_g, GBGGAIN);
 143         regw(ccdc_cfg.bayer.gain.b_mg, BMGGAIN);
 144         /* configure offset */
 145         regw(ccdc_cfg.bayer.ccdc_offset, OFFSET);
 146 }
 147
 148 /*
 149  * ccdc_restore_defaults()
 150  * This function restore power on defaults in the ccdc registers
 151  */
 152 static int ccdc_restore_defaults(void)
 153 {
 154         int i;
 155
 156         dev_dbg(ccdc_cfg.dev, "\nstarting ccdc_restore_defaults...");
 157         /* set all registers to zero */
 158         for (i = 0; i <= CCDC_REG_LAST; i += 4)
 159                 regw(0, i);
 160
 161         /* now override the values with power on defaults in registers */
 162         regw(MODESET_DEFAULT, MODESET);
 163         /* no culling support */
 164         regw(CULH_DEFAULT, CULH);
 165         regw(CULV_DEFAULT, CULV);
 166         /* Set default Gain and Offset */
 167         ccdc_cfg.bayer.gain.r_ye = GAIN_DEFAULT;
 168         ccdc_cfg.bayer.gain.gb_g = GAIN_DEFAULT;
 169         ccdc_cfg.bayer.gain.gr_cy = GAIN_DEFAULT;
 170         ccdc_cfg.bayer.gain.b_mg = GAIN_DEFAULT;
 171         ccdc_config_gain_offset();
 172         regw(OUTCLIP_DEFAULT, OUTCLIP);
 173         regw(LSCCFG2_DEFAULT, LSCCFG2);
 174         /* select ccdc input */
 175         if (vpss_select_ccdc_source(VPSS_CCDCIN)) {
 176                 dev_dbg(ccdc_cfg.dev, "\ncouldn't select ccdc input source");
 177                 return -EFAULT;
 178         }
 179         /* select ccdc clock */
 180         if (vpss_enable_clock(VPSS_CCDC_CLOCK, 1) < 0) {
 181                 dev_dbg(ccdc_cfg.dev, "\ncouldn't enable ccdc clock");
 182                 return -EFAULT;
 183         }
 184         dev_dbg(ccdc_cfg.dev, "\nEnd of ccdc_restore_defaults...");
 185         return 0;
 186 }
 187
 188 static int ccdc_open(struct device *device)
 189 {
 190         return ccdc_restore_defaults();
 191 }
 192
 193 static int ccdc_close(struct device *device)
 194 {
 195         /* disable clock */
 196         vpss_enable_clock(VPSS_CCDC_CLOCK, 0);
 197         /* do nothing for now */
 198         return 0;
 199 }
 200 /*
 201  * ccdc_setwin()
 202  * This function will configure the window size to
 203  * be capture in CCDC reg.
 204  */
 205 static void ccdc_setwin(struct v4l2_rect *image_win,
 206                         enum ccdc_frmfmt frm_fmt, int ppc)
 207 {
 208         int horz_start, horz_nr_pixels;
 209         int vert_start, vert_nr_lines;
 210         int mid_img = 0;
 211
 212         dev_dbg(ccdc_cfg.dev, "\nStarting ccdc_setwin...");
 213
 214         /*
 215          * ppc - per pixel count. indicates how many pixels per cell
 216          * output to SDRAM. example, for ycbcr, it is one y and one c, so 2.
 217          * raw capture this is 1
 218          */
 219         horz_start = image_win->left << (ppc - 1);
 220         horz_nr_pixels = ((image_win->width) << (ppc - 1)) - 1;
 221
 222         /* Writing the horizontal info into the registers */
 223         regw(horz_start, SPH);
 224         regw(horz_nr_pixels, NPH);
 225         vert_start = image_win->top;
 226
 227         if (frm_fmt == CCDC_FRMFMT_INTERLACED) {
 228                 vert_nr_lines = (image_win->height >> 1) - 1;
 229                 vert_start >>= 1;
 230                 /* Since first line doesn't have any data */
 231                 vert_start += 1;
 232                 /* configure VDINT0 and VDINT1 */
 233                 regw(vert_start, VDINT0);
 234         } else {
 235                 /* Since first line doesn't have any data */
 236                 vert_start += 1;
 237                 vert_nr_lines = image_win->height - 1;
 238                 /* configure VDINT0 and VDINT1 */
 239                 mid_img = vert_start + (image_win->height / 2);
 240                 regw(vert_start, VDINT0);
 241                 regw(mid_img, VDINT1);
 242         }
 243         regw(vert_start & CCDC_START_VER_ONE_MASK, SLV0);
 244         regw(vert_start & CCDC_START_VER_TWO_MASK, SLV1);
 245         regw(vert_nr_lines & CCDC_NUM_LINES_VER, NLV);
 246         dev_dbg(ccdc_cfg.dev, "\nEnd of ccdc_setwin...");
 247 }
 248
 249 /* This function will configure CCDC for YCbCr video capture */
 250 static void ccdc_config_ycbcr(void)
 251 {
 252         struct ccdc_params_ycbcr *params = &ccdc_cfg.ycbcr;
 253         u32 temp;
 254
 255         /* first set the CCDC power on defaults values in all registers */
 256         dev_dbg(ccdc_cfg.dev, "\nStarting ccdc_config_ycbcr...");
 257         ccdc_restore_defaults();
 258
 259         /* configure pixel format & video frame format */
 260         temp = (((params->pix_fmt & CCDC_INPUT_MODE_MASK) <<
 261                 CCDC_INPUT_MODE_SHIFT) |
 262                 ((params->frm_fmt & CCDC_FRM_FMT_MASK) <<
 263                 CCDC_FRM_FMT_SHIFT));
 264
 265         /* setup BT.656 sync mode */
 266         if (params->bt656_enable) {
 267                 regw(CCDC_REC656IF_BT656_EN, REC656IF);
 268                 /*
 269                  * configure the FID, VD, HD pin polarity fld,hd pol positive,
 270                  * vd negative, 8-bit pack mode
 271                  */
 272                 temp |= CCDC_VD_POL_NEGATIVE;
 273         } else {                /* y/c external sync mode */
 274                 temp |= (((params->fid_pol & CCDC_FID_POL_MASK) <<
 275                         CCDC_FID_POL_SHIFT) |
 276                         ((params->hd_pol & CCDC_HD_POL_MASK) <<
 277                         CCDC_HD_POL_SHIFT) |
 278                         ((params->vd_pol & CCDC_VD_POL_MASK) <<
 279                         CCDC_VD_POL_SHIFT));
 280         }
 281
 282         /* pack the data to 8-bit */
 283         temp |= CCDC_DATA_PACK_ENABLE;
 284
 285         regw(temp, MODESET);
 286
 287         /* configure video window */
 288         ccdc_setwin(&params->win, params->frm_fmt, 2);
 289
 290         /* configure the order of y cb cr in SD-RAM */
 291         temp = (params->pix_order << CCDC_Y8POS_SHIFT);
 292         temp |= CCDC_LATCH_ON_VSYNC_DISABLE | CCDC_CCDCFG_FIDMD_NO_LATCH_VSYNC;
 293         regw(temp, CCDCFG);
 294
 295         /*
 296          * configure the horizontal line offset. This is done by rounding up
 297          * width to a multiple of 16 pixels and multiply by two to account for
 298          * y:cb:cr 4:2:2 data
 299          */
 300         regw(((params->win.width * 2 + 31) >> 5), HSIZE);
 301
 302         /* configure the memory line offset */
 303         if (params->buf_type == CCDC_BUFTYPE_FLD_INTERLEAVED) {
 304                 /* two fields are interleaved in memory */
 305                 regw(CCDC_SDOFST_FIELD_INTERLEAVED, SDOFST);
 306         }
 307
 308         dev_dbg(ccdc_cfg.dev, "\nEnd of ccdc_config_ycbcr...\n");
 309 }
 310
 311 /*
 312  * ccdc_config_black_clamp()
 313  * configure parameters for Optical Black Clamp
 314  */
 315 static void ccdc_config_black_clamp(struct ccdc_black_clamp *bclamp)
 316 {
 317         u32 val;
 318
 319         if (!bclamp->b_clamp_enable) {
 320                 /* configure DCSub */
 321                 regw(bclamp->dc_sub & CCDC_BLK_DC_SUB_MASK, DCSUB);
 322                 regw(0x0000, CLAMP);
 323                 return;
 324         }
 325         /* Enable the Black clamping, set sample lines and pixels */
 326         val = (bclamp->start_pixel & CCDC_BLK_ST_PXL_MASK) |
 327               ((bclamp->sample_pixel & CCDC_BLK_SAMPLE_LN_MASK) <<
 328                 CCDC_BLK_SAMPLE_LN_SHIFT) | CCDC_BLK_CLAMP_ENABLE;
 329         regw(val, CLAMP);
 330
 331         /* If Black clamping is enable then make dcsub 0 */
 332         val = (bclamp->sample_ln & CCDC_NUM_LINE_CALC_MASK)
 333                         << CCDC_NUM_LINE_CALC_SHIFT;
 334         regw(val, DCSUB);
 335 }
 336
 337 /*
 338  * ccdc_config_black_compense()
 339  * configure parameters for Black Compensation
 340  */
 341 static void ccdc_config_black_compense(struct ccdc_black_compensation *bcomp)
 342 {
 343         u32 val;
 344
 345         val = (bcomp->b & CCDC_BLK_COMP_MASK) |
 346                 ((bcomp->gb & CCDC_BLK_COMP_MASK) <<
 347                 CCDC_BLK_COMP_GB_COMP_SHIFT);
 348         regw(val, BLKCMP1);
 349
 350         val = ((bcomp->gr & CCDC_BLK_COMP_MASK) <<
 351                 CCDC_BLK_COMP_GR_COMP_SHIFT) |
 352                 ((bcomp->r & CCDC_BLK_COMP_MASK) <<
 353                 CCDC_BLK_COMP_R_COMP_SHIFT);
 354         regw(val, BLKCMP0);
 355 }
 356
 357 /*
 358  * ccdc_write_dfc_entry()
 359  * write an entry in the dfc table.
 360  */
 361 static int ccdc_write_dfc_entry(int index, struct ccdc_vertical_dft *dfc)
 362 {
 363 /* TODO This is to be re-visited and adjusted */
 364 #define DFC_WRITE_WAIT_COUNT    1000
 365         u32 val, count = DFC_WRITE_WAIT_COUNT;
 366
 367         regw(dfc->dft_corr_vert[index], DFCMEM0);
 368         regw(dfc->dft_corr_horz[index], DFCMEM1);
 369         regw(dfc->dft_corr_sub1[index], DFCMEM2);
 370         regw(dfc->dft_corr_sub2[index], DFCMEM3);
 371         regw(dfc->dft_corr_sub3[index], DFCMEM4);
 372         /* set WR bit to write */
 373         val = regr(DFCMEMCTL) | CCDC_DFCMEMCTL_DFCMWR_MASK;
 374         regw(val, DFCMEMCTL);
 375
 376         /*
 377          * Assume, it is very short. If we get an error, we need to
 378          * adjust this value
 379          */
 380         while (regr(DFCMEMCTL) & CCDC_DFCMEMCTL_DFCMWR_MASK)
 381                 count--;
 382         /*
 383          * TODO We expect the count to be non-zero to be successful. Adjust
 384          * the count if write requires more time
 385          */
 386
 387         if (count) {
 388                 dev_err(ccdc_cfg.dev, "defect table write timeout !!!\n");
 389                 return -1;
 390         }
 391         return 0;
 392 }
 393
 394 /*
 395  * ccdc_config_vdfc()
 396  * configure parameters for Vertical Defect Correction
 397  */
 398 static int ccdc_config_vdfc(struct ccdc_vertical_dft *dfc)
 399 {
 400         u32 val;
 401         int i;
 402
 403         /* Configure General Defect Correction. The table used is from IPIPE */
 404         val = dfc->gen_dft_en & CCDC_DFCCTL_GDFCEN_MASK;
 405
 406         /* Configure Vertical Defect Correction if needed */
 407         if (!dfc->ver_dft_en) {
 408                 /* Enable only General Defect Correction */
 409                 regw(val, DFCCTL);
 410                 return 0;
 411         }
 412
 413         if (dfc->table_size > CCDC_DFT_TABLE_SIZE)
 414                 return -EINVAL;
 415
 416         val |= CCDC_DFCCTL_VDFC_DISABLE;
 417         val |= (dfc->dft_corr_ctl.vdfcsl & CCDC_DFCCTL_VDFCSL_MASK) <<
 418                 CCDC_DFCCTL_VDFCSL_SHIFT;
 419         val |= (dfc->dft_corr_ctl.vdfcuda & CCDC_DFCCTL_VDFCUDA_MASK) <<
 420                 CCDC_DFCCTL_VDFCUDA_SHIFT;
 421         val |= (dfc->dft_corr_ctl.vdflsft & CCDC_DFCCTL_VDFLSFT_MASK) <<
 422                 CCDC_DFCCTL_VDFLSFT_SHIFT;
 423         regw(val , DFCCTL);
 424
 425         /* clear address ptr to offset 0 */
 426         val = CCDC_DFCMEMCTL_DFCMARST_MASK << CCDC_DFCMEMCTL_DFCMARST_SHIFT;
 427
 428         /* write defect table entries */
 429         for (i = 0; i < dfc->table_size; i++) {
 430                 /* increment address for non zero index */
 431                 if (i != 0)
 432                         val = CCDC_DFCMEMCTL_INC_ADDR;
 433                 regw(val, DFCMEMCTL);
 434                 if (ccdc_write_dfc_entry(i, dfc) < 0)
 435                         return -EFAULT;
 436         }
 437
 438         /* update saturation level and enable dfc */
 439         regw(dfc->saturation_ctl & CCDC_VDC_DFCVSAT_MASK, DFCVSAT);
 440         val = regr(DFCCTL) | (CCDC_DFCCTL_VDFCEN_MASK <<
 441                         CCDC_DFCCTL_VDFCEN_SHIFT);
 442         regw(val, DFCCTL);
 443         return 0;
 444 }
 445
 446 /*
 447  * ccdc_config_csc()
 448  * configure parameters for color space conversion
 449  * Each register CSCM0-7 has two values in S8Q5 format.
 450  */
 451 static void ccdc_config_csc(struct ccdc_csc *csc)
 452 {
 453         u32 val1 = 0, val2;
 454         int i;
 455
 456         if (!csc->enable)
 457                 return;
 458
 459         /* Enable the CSC sub-module */
 460         regw(CCDC_CSC_ENABLE, CSCCTL);
 461
 462         /* Converting the co-eff as per the format of the register */
 463         for (i = 0; i < CCDC_CSC_COEFF_TABLE_SIZE; i++) {
 464                 if ((i % 2) == 0) {
 465                         /* CSCM - LSB */
 466                         val1 = (csc->coeff[i].integer &
 467                                 CCDC_CSC_COEF_INTEG_MASK)
 468                                 << CCDC_CSC_COEF_INTEG_SHIFT;
 469                         /*
 470                          * convert decimal part to binary. Use 2 decimal
 471                          * precision, user values range from .00 - 0.99
 472                          */
 473                         val1 |= (((csc->coeff[i].decimal &
 474                                 CCDC_CSC_COEF_DECIMAL_MASK) *
 475                                 CCDC_CSC_DEC_MAX) / 100);
 476                 } else {
 477
 478                         /* CSCM - MSB */
 479                         val2 = (csc->coeff[i].integer &
 480                                 CCDC_CSC_COEF_INTEG_MASK)
 481                                 << CCDC_CSC_COEF_INTEG_SHIFT;
 482                         val2 |= (((csc->coeff[i].decimal &
 483                                  CCDC_CSC_COEF_DECIMAL_MASK) *
 484                                  CCDC_CSC_DEC_MAX) / 100);
 485                         val2 <<= CCDC_CSCM_MSB_SHIFT;
 486                         val2 |= val1;
 487                         regw(val2, (CSCM0 + ((i - 1) << 1)));
 488                 }
 489         }
 490 }
 491
 492 /*
 493  * ccdc_config_color_patterns()
 494  * configure parameters for color patterns
 495  */
 496 static void ccdc_config_color_patterns(struct ccdc_col_pat *pat0,
 497                                        struct ccdc_col_pat *pat1)
 498 {
 499         u32 val;
 500
 501         val = (pat0->olop | (pat0->olep << 2) | (pat0->elop << 4) |
 502                 (pat0->elep << 6) | (pat1->olop << 8) | (pat1->olep << 10) |
 503                 (pat1->elop << 12) | (pat1->elep << 14));
 504         regw(val, COLPTN);
 505 }
 506
 507 /* This function will configure CCDC for Raw mode image capture */
 508 static int ccdc_config_raw(void)
 509 {
 510         struct ccdc_params_raw *params = &ccdc_cfg.bayer;
 511         struct ccdc_config_params_raw *config_params =
 512                                         &ccdc_cfg.bayer.config_params;
 513         unsigned int val;
 514
 515         dev_dbg(ccdc_cfg.dev, "\nStarting ccdc_config_raw...");
 516
 517         /* restore power on defaults to register */
 518         ccdc_restore_defaults();
 519
 520         /* CCDCFG register:
 521          * set CCD Not to swap input since input is RAW data
 522          * set FID detection function to Latch at V-Sync
 523          * set WENLOG - ccdc valid area to AND
 524          * set TRGSEL to WENBIT
 525          * set EXTRG to DISABLE
 526          * disable latching function on VSYNC - shadowed registers
 527          */
 528         regw(CCDC_YCINSWP_RAW | CCDC_CCDCFG_FIDMD_LATCH_VSYNC |
 529              CCDC_CCDCFG_WENLOG_AND | CCDC_CCDCFG_TRGSEL_WEN |
 530              CCDC_CCDCFG_EXTRG_DISABLE | CCDC_LATCH_ON_VSYNC_DISABLE, CCDCFG);
 531
 532         /*
 533          * Set VDHD direction to input,  input type to raw input
 534          * normal data polarity, do not use external WEN
 535          */
 536         val = (CCDC_VDHDOUT_INPUT | CCDC_RAW_IP_MODE | CCDC_DATAPOL_NORMAL |
 537                 CCDC_EXWEN_DISABLE);
 538
 539         /*
 540          * Configure the vertical sync polarity (MODESET.VDPOL), horizontal
 541          * sync polarity (MODESET.HDPOL), field id polarity (MODESET.FLDPOL),
 542          * frame format(progressive or interlace), & pixel format (Input mode)
 543          */
 544         val |= (((params->vd_pol & CCDC_VD_POL_MASK) << CCDC_VD_POL_SHIFT) |
 545                 ((params->hd_pol & CCDC_HD_POL_MASK) << CCDC_HD_POL_SHIFT) |
 546                 ((params->fid_pol & CCDC_FID_POL_MASK) << CCDC_FID_POL_SHIFT) |
 547                 ((params->frm_fmt & CCDC_FRM_FMT_MASK) << CCDC_FRM_FMT_SHIFT) |
 548                 ((params->pix_fmt & CCDC_PIX_FMT_MASK) << CCDC_PIX_FMT_SHIFT));
 549
 550         /* set pack for alaw compression */
 551         if ((config_params->data_sz == CCDC_DATA_8BITS) ||
 552              config_params->alaw.enable)
 553                 val |= CCDC_DATA_PACK_ENABLE;
 554
 555         /* Configure for LPF */
 556         if (config_params->lpf_enable)
 557                 val |= (config_params->lpf_enable & CCDC_LPF_MASK) <<
 558                         CCDC_LPF_SHIFT;
 559
 560         /* Configure the data shift */
 561         val |= (config_params->datasft & CCDC_DATASFT_MASK) <<
 562                 CCDC_DATASFT_SHIFT;
 563         regw(val , MODESET);
 564         dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to MODESET...\n", val);
 565
 566         /* Configure the Median Filter threshold */
 567         regw((config_params->med_filt_thres) & CCDC_MED_FILT_THRESH, MEDFILT);
 568
 569         /* Configure GAMMAWD register. defaur 11-2, and Mosaic cfa pattern */
 570         val = CCDC_GAMMA_BITS_11_2 << CCDC_GAMMAWD_INPUT_SHIFT |
 571                 CCDC_CFA_MOSAIC;
 572
 573         /* Enable and configure aLaw register if needed */
 574         if (config_params->alaw.enable) {
 575                 val |= (CCDC_ALAW_ENABLE |
 576                         ((config_params->alaw.gamma_wd &
 577                         CCDC_ALAW_GAMMA_WD_MASK) <<
 578                         CCDC_GAMMAWD_INPUT_SHIFT));
 579         }
 580
 581         /* Configure Median filter1 & filter2 */
 582         val |= ((config_params->mfilt1 << CCDC_MFILT1_SHIFT) |
 583                 (config_params->mfilt2 << CCDC_MFILT2_SHIFT));
 584
 585         regw(val, GAMMAWD);
 586         dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to GAMMAWD...\n", val);
 587
 588         /* configure video window */
 589         ccdc_setwin(&params->win, params->frm_fmt, 1);
 590
 591         /* Optical Clamp Averaging */
 592         ccdc_config_black_clamp(&config_params->blk_clamp);
 593
 594         /* Black level compensation */
 595         ccdc_config_black_compense(&config_params->blk_comp);
 596
 597         /* Vertical Defect Correction if needed */
 598         if (ccdc_config_vdfc(&config_params->vertical_dft) < 0)
 599                 return -EFAULT;
 600
 601         /* color space conversion */
 602         ccdc_config_csc(&config_params->csc);
 603
 604         /* color pattern */
 605         ccdc_config_color_patterns(&config_params->col_pat_field0,
 606                                    &config_params->col_pat_field1);
 607
 608         /* Configure the Gain  & offset control */
 609         ccdc_config_gain_offset();
 610
 611         dev_dbg(ccdc_cfg.dev, "\nWriting %x to COLPTN...\n", val);
 612
 613         /* Configure DATAOFST  register */
 614         val = (config_params->data_offset.horz_offset & CCDC_DATAOFST_MASK) <<
 615                 CCDC_DATAOFST_H_SHIFT;
 616         val |= (config_params->data_offset.vert_offset & CCDC_DATAOFST_MASK) <<
 617                 CCDC_DATAOFST_V_SHIFT;
 618         regw(val, DATAOFST);
 619
 620         /* configuring HSIZE register */
 621         val = (params->horz_flip_enable & CCDC_HSIZE_FLIP_MASK) <<
 622                 CCDC_HSIZE_FLIP_SHIFT;
 623
 624         /* If pack 8 is enable then 1 pixel will take 1 byte */
 625         if ((config_params->data_sz == CCDC_DATA_8BITS) ||
 626              config_params->alaw.enable) {
 627                 val |= (((params->win.width) + 31) >> 5) &
 628                         CCDC_HSIZE_VAL_MASK;
 629
 630                 /* adjust to multiple of 32 */
 631                 dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to HSIZE...\n",
 632                        (((params->win.width) + 31) >> 5) &
 633                         CCDC_HSIZE_VAL_MASK);
 634         } else {
 635                 /* else one pixel will take 2 byte */
 636                 val |= (((params->win.width * 2) + 31) >> 5) &
 637                         CCDC_HSIZE_VAL_MASK;
 638
 639                 dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to HSIZE...\n",
 640                        (((params->win.width * 2) + 31) >> 5) &
 641                         CCDC_HSIZE_VAL_MASK);
 642         }
 643         regw(val, HSIZE);
 644
 645         /* Configure SDOFST register */
 646         if (params->frm_fmt == CCDC_FRMFMT_INTERLACED) {
 647                 if (params->image_invert_enable) {
 648                         /* For interlace inverse mode */
 649                         regw(CCDC_SDOFST_INTERLACE_INVERSE, SDOFST);
 650                         dev_dbg(ccdc_cfg.dev, "\nWriting %x to SDOFST...\n",
 651                                 CCDC_SDOFST_INTERLACE_INVERSE);
 652                 } else {
 653                         /* For interlace non inverse mode */
 654                         regw(CCDC_SDOFST_INTERLACE_NORMAL, SDOFST);
 655                         dev_dbg(ccdc_cfg.dev, "\nWriting %x to SDOFST...\n",
 656                                 CCDC_SDOFST_INTERLACE_NORMAL);
 657                 }
 658         } else if (params->frm_fmt == CCDC_FRMFMT_PROGRESSIVE) {
 659                 if (params->image_invert_enable) {
 660                         /* For progessive inverse mode */
 661                         regw(CCDC_SDOFST_PROGRESSIVE_INVERSE, SDOFST);
 662                         dev_dbg(ccdc_cfg.dev, "\nWriting %x to SDOFST...\n",
 663                                 CCDC_SDOFST_PROGRESSIVE_INVERSE);
 664                 } else {
 665                         /* For progessive non inverse mode */
 666                         regw(CCDC_SDOFST_PROGRESSIVE_NORMAL, SDOFST);
 667                         dev_dbg(ccdc_cfg.dev, "\nWriting %x to SDOFST...\n",
 668                                 CCDC_SDOFST_PROGRESSIVE_NORMAL);
 669                 }
 670         }
 671         dev_dbg(ccdc_cfg.dev, "\nend of ccdc_config_raw...");
 672         return 0;
 673 }
 674
 675 static int ccdc_configure(void)
 676 {
 677         if (ccdc_cfg.if_type == VPFE_RAW_BAYER)
 678                 return ccdc_config_raw();
 679         else
 680                 ccdc_config_ycbcr();
 681         return 0;
 682 }
 683
 684 static int ccdc_set_buftype(enum ccdc_buftype buf_type)
 685 {
 686         if (ccdc_cfg.if_type == VPFE_RAW_BAYER)
 687                 ccdc_cfg.bayer.buf_type = buf_type;
 688         else
 689                 ccdc_cfg.ycbcr.buf_type = buf_type;
 690         return 0;
 691 }
 692 static enum ccdc_buftype ccdc_get_buftype(void)
 693 {
 694         if (ccdc_cfg.if_type == VPFE_RAW_BAYER)
 695                 return ccdc_cfg.bayer.buf_type;
 696         return ccdc_cfg.ycbcr.buf_type;
 697 }
 698
 699 static int ccdc_enum_pix(u32 *pix, int i)
 700 {
 701         int ret = -EINVAL;
 702         if (ccdc_cfg.if_type == VPFE_RAW_BAYER) {
 703                 if (i < ARRAY_SIZE(ccdc_raw_bayer_pix_formats)) {
 704                         *pix = ccdc_raw_bayer_pix_formats[i];
 705                         ret = 0;
 706                 }
 707         } else {
 708                 if (i < ARRAY_SIZE(ccdc_raw_yuv_pix_formats)) {
 709                         *pix = ccdc_raw_yuv_pix_formats[i];
 710                         ret = 0;
 711                 }
 712         }
 713         return ret;
 714 }
 715
 716 static int ccdc_set_pixel_format(u32 pixfmt)
 717 {
 718         struct ccdc_a_law *alaw = &ccdc_cfg.bayer.config_params.alaw;
 719
 720         if (ccdc_cfg.if_type == VPFE_RAW_BAYER) {
 721                 ccdc_cfg.bayer.pix_fmt = CCDC_PIXFMT_RAW;
 722                 if (pixfmt == V4L2_PIX_FMT_SBGGR8)
 723                         alaw->enable = 1;
 724                 else if (pixfmt != V4L2_PIX_FMT_SBGGR16)
 725                         return -EINVAL;
 726         } else {
 727                 if (pixfmt == V4L2_PIX_FMT_YUYV)
 728                         ccdc_cfg.ycbcr.pix_order = CCDC_PIXORDER_YCBYCR;
 729                 else if (pixfmt == V4L2_PIX_FMT_UYVY)
 730                         ccdc_cfg.ycbcr.pix_order = CCDC_PIXORDER_CBYCRY;
 731                 else
 732                         return -EINVAL;
 733         }
 734         return 0;
 735 }
 736 static u32 ccdc_get_pixel_format(void)
 737 {
 738         struct ccdc_a_law *alaw = &ccdc_cfg.bayer.config_params.alaw;
 739         u32 pixfmt;
 740
 741         if (ccdc_cfg.if_type == VPFE_RAW_BAYER)
 742                 if (alaw->enable)
 743                         pixfmt = V4L2_PIX_FMT_SBGGR8;
 744                 else
 745                         pixfmt = V4L2_PIX_FMT_SBGGR16;
 746         else {
 747                 if (ccdc_cfg.ycbcr.pix_order == CCDC_PIXORDER_YCBYCR)
 748                         pixfmt = V4L2_PIX_FMT_YUYV;
 749                 else
 750                         pixfmt = V4L2_PIX_FMT_UYVY;
 751         }
 752         return pixfmt;
 753 }
 754 static int ccdc_set_image_window(struct v4l2_rect *win)
 755 {
 756         if (ccdc_cfg.if_type == VPFE_RAW_BAYER)
 757                 ccdc_cfg.bayer.win = *win;
 758         else
 759                 ccdc_cfg.ycbcr.win = *win;
 760         return 0;
 761 }
 762
 763 static void ccdc_get_image_window(struct v4l2_rect *win)
 764 {
 765         if (ccdc_cfg.if_type == VPFE_RAW_BAYER)
 766                 *win = ccdc_cfg.bayer.win;
 767         else
 768                 *win = ccdc_cfg.ycbcr.win;
 769 }
 770
 771 static unsigned int ccdc_get_line_length(void)
 772 {
 773         struct ccdc_config_params_raw *config_params =
 774                                 &ccdc_cfg.bayer.config_params;
 775         unsigned int len;
 776
 777         if (ccdc_cfg.if_type == VPFE_RAW_BAYER) {
 778                 if ((config_params->alaw.enable) ||
 779                     (config_params->data_sz == CCDC_DATA_8BITS))
 780                         len = ccdc_cfg.bayer.win.width;
 781                 else
 782                         len = ccdc_cfg.bayer.win.width * 2;
 783         } else
 784                 len = ccdc_cfg.ycbcr.win.width * 2;
 785         return ALIGN(len, 32);
 786 }
 787
 788 static int ccdc_set_frame_format(enum ccdc_frmfmt frm_fmt)
 789 {
 790         if (ccdc_cfg.if_type == VPFE_RAW_BAYER)
 791                 ccdc_cfg.bayer.frm_fmt = frm_fmt;
 792         else
 793                 ccdc_cfg.ycbcr.frm_fmt = frm_fmt;
 794         return 0;
 795 }
 796
 797 static enum ccdc_frmfmt ccdc_get_frame_format(void)
 798 {
 799         if (ccdc_cfg.if_type == VPFE_RAW_BAYER)
 800                 return ccdc_cfg.bayer.frm_fmt;
 801         else
 802                 return ccdc_cfg.ycbcr.frm_fmt;
 803 }
 804
 805 static int ccdc_getfid(void)
 806 {
 807         return  (regr(MODESET) >> 15) & 1;
 808 }
 809
 810 /* misc operations */
 811 static inline void ccdc_setfbaddr(unsigned long addr)
 812 {
 813         regw((addr >> 21) & 0x007f, STADRH);
 814         regw((addr >> 5) & 0x0ffff, STADRL);
 815 }
 816
 817 static int ccdc_set_hw_if_params(struct vpfe_hw_if_param *params)
 818 {
 819         ccdc_cfg.if_type = params->if_type;
 820
 821         switch (params->if_type) {
 822         case VPFE_BT656:
 823         case VPFE_YCBCR_SYNC_16:
 824         case VPFE_YCBCR_SYNC_8:
 825                 ccdc_cfg.ycbcr.vd_pol = params->vdpol;
 826                 ccdc_cfg.ycbcr.hd_pol = params->hdpol;
 827                 break;
 828         default:
 829                 /* TODO add support for raw bayer here */
 830                 return -EINVAL;
 831         }
 832         return 0;
 833 }
 834
 835 static const struct ccdc_hw_device ccdc_hw_dev = {
 836         .name = "DM355 CCDC",
 837         .owner = THIS_MODULE,
 838         .hw_ops = {
 839                 .open = ccdc_open,
 840                 .close = ccdc_close,
 841                 .enable = ccdc_enable,
 842                 .enable_out_to_sdram = ccdc_enable_output_to_sdram,
 843                 .set_hw_if_params = ccdc_set_hw_if_params,
 844                 .configure = ccdc_configure,
 845                 .set_buftype = ccdc_set_buftype,
 846                 .get_buftype = ccdc_get_buftype,
 847                 .enum_pix = ccdc_enum_pix,
 848                 .set_pixel_format = ccdc_set_pixel_format,
 849                 .get_pixel_format = ccdc_get_pixel_format,
 850                 .set_frame_format = ccdc_set_frame_format,
 851                 .get_frame_format = ccdc_get_frame_format,
 852                 .set_image_window = ccdc_set_image_window,
 853                 .get_image_window = ccdc_get_image_window,
 854                 .get_line_length = ccdc_get_line_length,
 855                 .setfbaddr = ccdc_setfbaddr,
 856                 .getfid = ccdc_getfid,
 857         },
 858 };
 859
 860 static int dm355_ccdc_probe(struct platform_device *pdev)
 861 {
 862         void (*setup_pinmux)(void);
 863         struct resource *res;
 864         int status = 0;
 865
 866         /*
 867          * first try to register with vpfe. If not correct platform, then we
 868          * don't have to iomap
 869          */
 870         status = vpfe_register_ccdc_device(&ccdc_hw_dev);
 871         if (status < 0)
 872                 return status;
 873
 874         res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 875         if (!res) {
 876                 status = -ENODEV;
 877                 goto fail_nores;
 878         }
 879
 880         res = request_mem_region(res->start, resource_size(res), res->name);
 881         if (!res) {
 882                 status = -EBUSY;
 883                 goto fail_nores;
 884         }
 885
 886         ccdc_cfg.base_addr = ioremap_nocache(res->start, resource_size(res));
 887         if (!ccdc_cfg.base_addr) {
 888                 status = -ENOMEM;
 889                 goto fail_nomem;
 890         }
 891
 892         /* Platform data holds setup_pinmux function ptr */
 893         if (NULL == pdev->dev.platform_data) {
 894                 status = -ENODEV;
 895                 goto fail_nomap;
 896         }
 897         setup_pinmux = pdev->dev.platform_data;
 898         /*
 899          * setup Mux configuration for ccdc which may be different for
 900          * different SoCs using this CCDC
 901          */
 902         setup_pinmux();
 903         ccdc_cfg.dev = &pdev->dev;
 904         printk(KERN_NOTICE "%s is registered with vpfe.\n", ccdc_hw_dev.name);
 905         return 0;
 906 fail_nomap:
 907         iounmap(ccdc_cfg.base_addr);
 908 fail_nomem:
 909         release_mem_region(res->start, resource_size(res));
 910 fail_nores:
 911         vpfe_unregister_ccdc_device(&ccdc_hw_dev);
 912         return status;
 913 }
 914
 915 static int dm355_ccdc_remove(struct platform_device *pdev)
 916 {
 917         struct resource *res;
 918
 919         iounmap(ccdc_cfg.base_addr);
 920         res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 921         if (res)
 922                 release_mem_region(res->start, resource_size(res));
 923         vpfe_unregister_ccdc_device(&ccdc_hw_dev);
 924         return 0;
 925 }
 926
 927 static struct platform_driver dm355_ccdc_driver = {
 928         .driver = {
 929                 .name   = "dm355_ccdc",
 930         },
 931         .remove = dm355_ccdc_remove,
 932         .probe = dm355_ccdc_probe,
 933 };
 934
 935 module_platform_driver(dm355_ccdc_driver);