]> git.ipfire.org Git - thirdparty/kernel/stable.git/blob - drivers/mfd/sm501.c
projects / thirdparty / kernel / stable.git / blob
? search:
summary | shortlog | log | commit | commitdiff | tree
blame | history | raw | HEAD
net: bcmgenet: use promisc for unsupported filters
[thirdparty/kernel/stable.git] / drivers / mfd / sm501.c
1 /* linux/drivers/mfd/sm501.c
2 *
3 * Copyright (C) 2006 Simtec Electronics
4 * Ben Dooks <ben@simtec.co.uk>
5 * Vincent Sanders <vince@simtec.co.uk>
6 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License version 2 as
9 * published by the Free Software Foundation.
10 *
11 * SM501 MFD driver
12 */
13
14 #include <linux/kernel.h>
15 #include <linux/module.h>
16 #include <linux/delay.h>
17 #include <linux/init.h>
18 #include <linux/list.h>
19 #include <linux/device.h>
20 #include <linux/platform_device.h>
21 #include <linux/pci.h>
22 #include <linux/platform_data/i2c-gpio.h>
23 #include <linux/gpio/machine.h>
24 #include <linux/slab.h>
25
26 #include <linux/sm501.h>
27 #include <linux/sm501-regs.h>
28 #include <linux/serial_8250.h>
29
30 #include <linux/io.h>
31
32 struct sm501_device {
33 struct list_head list;
34 struct platform_device pdev;
35 };
36
37 struct sm501_gpio;
38
39 #ifdef CONFIG_MFD_SM501_GPIO
40 #include <linux/gpio.h>
41
42 struct sm501_gpio_chip {
43 struct gpio_chip gpio;
44 struct sm501_gpio *ourgpio; /* to get back to parent. */
45 void __iomem *regbase;
46 void __iomem *control; /* address of control reg. */
47 };
48
49 struct sm501_gpio {
50 struct sm501_gpio_chip low;
51 struct sm501_gpio_chip high;
52 spinlock_t lock;
53
54 unsigned int registered : 1;
55 void __iomem *regs;
56 struct resource *regs_res;
57 };
58 #else
59 struct sm501_gpio {
60 /* no gpio support, empty definition for sm501_devdata. */
61 };
62 #endif
63
64 struct sm501_devdata {
65 spinlock_t reg_lock;
66 struct mutex clock_lock;
67 struct list_head devices;
68 struct sm501_gpio gpio;
69
70 struct device *dev;
71 struct resource *io_res;
72 struct resource *mem_res;
73 struct resource *regs_claim;
74 struct sm501_platdata *platdata;
75
76
77 unsigned int in_suspend;
78 unsigned long pm_misc;
79
80 int unit_power[20];
81 unsigned int pdev_id;
82 unsigned int irq;
83 void __iomem *regs;
84 unsigned int rev;
85 };
86
87
88 #define MHZ (1000 * 1000)
89
90 #ifdef DEBUG
91 static const unsigned int div_tab[] = {
92 [0] = 1,
93 [1] = 2,
94 [2] = 4,
95 [3] = 8,
96 [4] = 16,
97 [5] = 32,
98 [6] = 64,
99 [7] = 128,
100 [8] = 3,
101 [9] = 6,
102 [10] = 12,
103 [11] = 24,
104 [12] = 48,
105 [13] = 96,
106 [14] = 192,
107 [15] = 384,
108 [16] = 5,
109 [17] = 10,
110 [18] = 20,
111 [19] = 40,
112 [20] = 80,
113 [21] = 160,
114 [22] = 320,
115 [23] = 604,
116 };
117
118 static unsigned long decode_div(unsigned long pll2, unsigned long val,
119 unsigned int lshft, unsigned int selbit,
120 unsigned long mask)
121 {
122 if (val & selbit)
123 pll2 = 288 * MHZ;
124
125 return pll2 / div_tab[(val >> lshft) & mask];
126 }
127
128 #define fmt_freq(x) ((x) / MHZ), ((x) % MHZ), (x)
129
130 /* sm501_dump_clk
131 *
132 * Print out the current clock configuration for the device
133 */
134
135 static void sm501_dump_clk(struct sm501_devdata *sm)
136 {
137 unsigned long misct = smc501_readl(sm->regs + SM501_MISC_TIMING);
138 unsigned long pm0 = smc501_readl(sm->regs + SM501_POWER_MODE_0_CLOCK);
139 unsigned long pm1 = smc501_readl(sm->regs + SM501_POWER_MODE_1_CLOCK);
140 unsigned long pmc = smc501_readl(sm->regs + SM501_POWER_MODE_CONTROL);
141 unsigned long sdclk0, sdclk1;
142 unsigned long pll2 = 0;
143
144 switch (misct & 0x30) {
145 case 0x00:
146 pll2 = 336 * MHZ;
147 break;
148 case 0x10:
149 pll2 = 288 * MHZ;
150 break;
151 case 0x20:
152 pll2 = 240 * MHZ;
153 break;
154 case 0x30:
155 pll2 = 192 * MHZ;
156 break;
157 }
158
159 sdclk0 = (misct & (1<<12)) ? pll2 : 288 * MHZ;
160 sdclk0 /= div_tab[((misct >> 8) & 0xf)];
161
162 sdclk1 = (misct & (1<<20)) ? pll2 : 288 * MHZ;
163 sdclk1 /= div_tab[((misct >> 16) & 0xf)];
164
165 dev_dbg(sm->dev, "MISCT=%08lx, PM0=%08lx, PM1=%08lx\n",
166 misct, pm0, pm1);
167
168 dev_dbg(sm->dev, "PLL2 = %ld.%ld MHz (%ld), SDCLK0=%08lx, SDCLK1=%08lx\n",
169 fmt_freq(pll2), sdclk0, sdclk1);
170
171 dev_dbg(sm->dev, "SDRAM: PM0=%ld, PM1=%ld\n", sdclk0, sdclk1);
172
173 dev_dbg(sm->dev, "PM0[%c]: "
174 "P2 %ld.%ld MHz (%ld), V2 %ld.%ld (%ld), "
175 "M %ld.%ld (%ld), MX1 %ld.%ld (%ld)\n",
176 (pmc & 3 ) == 0 ? '*' : '-',
177 fmt_freq(decode_div(pll2, pm0, 24, 1<<29, 31)),
178 fmt_freq(decode_div(pll2, pm0, 16, 1<<20, 15)),
179 fmt_freq(decode_div(pll2, pm0, 8, 1<<12, 15)),
180 fmt_freq(decode_div(pll2, pm0, 0, 1<<4, 15)));
181
182 dev_dbg(sm->dev, "PM1[%c]: "
183 "P2 %ld.%ld MHz (%ld), V2 %ld.%ld (%ld), "
184 "M %ld.%ld (%ld), MX1 %ld.%ld (%ld)\n",
185 (pmc & 3 ) == 1 ? '*' : '-',
186 fmt_freq(decode_div(pll2, pm1, 24, 1<<29, 31)),
187 fmt_freq(decode_div(pll2, pm1, 16, 1<<20, 15)),
188 fmt_freq(decode_div(pll2, pm1, 8, 1<<12, 15)),
189 fmt_freq(decode_div(pll2, pm1, 0, 1<<4, 15)));
190 }
191
192 static void sm501_dump_regs(struct sm501_devdata *sm)
193 {
194 void __iomem *regs = sm->regs;
195
196 dev_info(sm->dev, "System Control %08x\n",
197 smc501_readl(regs + SM501_SYSTEM_CONTROL));
198 dev_info(sm->dev, "Misc Control %08x\n",
199 smc501_readl(regs + SM501_MISC_CONTROL));
200 dev_info(sm->dev, "GPIO Control Low %08x\n",
201 smc501_readl(regs + SM501_GPIO31_0_CONTROL));
202 dev_info(sm->dev, "GPIO Control Hi %08x\n",
203 smc501_readl(regs + SM501_GPIO63_32_CONTROL));
204 dev_info(sm->dev, "DRAM Control %08x\n",
205 smc501_readl(regs + SM501_DRAM_CONTROL));
206 dev_info(sm->dev, "Arbitration Ctrl %08x\n",
207 smc501_readl(regs + SM501_ARBTRTN_CONTROL));
208 dev_info(sm->dev, "Misc Timing %08x\n",
209 smc501_readl(regs + SM501_MISC_TIMING));
210 }
211
212 static void sm501_dump_gate(struct sm501_devdata *sm)
213 {
214 dev_info(sm->dev, "CurrentGate %08x\n",
215 smc501_readl(sm->regs + SM501_CURRENT_GATE));
216 dev_info(sm->dev, "CurrentClock %08x\n",
217 smc501_readl(sm->regs + SM501_CURRENT_CLOCK));
218 dev_info(sm->dev, "PowerModeControl %08x\n",
219 smc501_readl(sm->regs + SM501_POWER_MODE_CONTROL));
220 }
221
222 #else
223 static inline void sm501_dump_gate(struct sm501_devdata *sm) { }
224 static inline void sm501_dump_regs(struct sm501_devdata *sm) { }
225 static inline void sm501_dump_clk(struct sm501_devdata *sm) { }
226 #endif
227
228 /* sm501_sync_regs
229 *
230 * ensure the
231 */
232
233 static void sm501_sync_regs(struct sm501_devdata *sm)
234 {
235 smc501_readl(sm->regs);
236 }
237
238 static inline void sm501_mdelay(struct sm501_devdata *sm, unsigned int delay)
239 {
240 /* during suspend/resume, we are currently not allowed to sleep,
241 * so change to using mdelay() instead of msleep() if we
242 * are in one of these paths */
243
244 if (sm->in_suspend)
245 mdelay(delay);
246 else
247 msleep(delay);
248 }
249
250 /* sm501_misc_control
251 *
252 * alters the miscellaneous control parameters
253 */
254
255 int sm501_misc_control(struct device *dev,
256 unsigned long set, unsigned long clear)
257 {
258 struct sm501_devdata *sm = dev_get_drvdata(dev);
259 unsigned long misc;
260 unsigned long save;
261 unsigned long to;
262
263 spin_lock_irqsave(&sm->reg_lock, save);
264
265 misc = smc501_readl(sm->regs + SM501_MISC_CONTROL);
266 to = (misc & ~clear) | set;
267
268 if (to != misc) {
269 smc501_writel(to, sm->regs + SM501_MISC_CONTROL);
270 sm501_sync_regs(sm);
271
272 dev_dbg(sm->dev, "MISC_CONTROL %08lx\n", misc);
273 }
274
275 spin_unlock_irqrestore(&sm->reg_lock, save);
276 return to;
277 }
278
279 EXPORT_SYMBOL_GPL(sm501_misc_control);
280
281 /* sm501_modify_reg
282 *
283 * Modify a register in the SM501 which may be shared with other
284 * drivers.
285 */
286
287 unsigned long sm501_modify_reg(struct device *dev,
288 unsigned long reg,
289 unsigned long set,
290 unsigned long clear)
291 {
292 struct sm501_devdata *sm = dev_get_drvdata(dev);
293 unsigned long data;
294 unsigned long save;
295
296 spin_lock_irqsave(&sm->reg_lock, save);
297
298 data = smc501_readl(sm->regs + reg);
299 data |= set;
300 data &= ~clear;
301
302 smc501_writel(data, sm->regs + reg);
303 sm501_sync_regs(sm);
304
305 spin_unlock_irqrestore(&sm->reg_lock, save);
306
307 return data;
308 }
309
310 EXPORT_SYMBOL_GPL(sm501_modify_reg);
311
312 /* sm501_unit_power
313 *
314 * alters the power active gate to set specific units on or off
315 */
316
317 int sm501_unit_power(struct device *dev, unsigned int unit, unsigned int to)
318 {
319 struct sm501_devdata *sm = dev_get_drvdata(dev);
320 unsigned long mode;
321 unsigned long gate;
322 unsigned long clock;
323
324 mutex_lock(&sm->clock_lock);
325
326 mode = smc501_readl(sm->regs + SM501_POWER_MODE_CONTROL);
327 gate = smc501_readl(sm->regs + SM501_CURRENT_GATE);
328 clock = smc501_readl(sm->regs + SM501_CURRENT_CLOCK);
329
330 mode &= 3; /* get current power mode */
331
332 if (unit >= ARRAY_SIZE(sm->unit_power)) {
333 dev_err(dev, "%s: bad unit %d\n", __func__, unit);
334 goto already;
335 }
336
337 dev_dbg(sm->dev, "%s: unit %d, cur %d, to %d\n", __func__, unit,
338 sm->unit_power[unit], to);
339
340 if (to == 0 && sm->unit_power[unit] == 0) {
341 dev_err(sm->dev, "unit %d is already shutdown\n", unit);
342 goto already;
343 }
344
345 sm->unit_power[unit] += to ? 1 : -1;
346 to = sm->unit_power[unit] ? 1 : 0;
347
348 if (to) {
349 if (gate & (1 << unit))
350 goto already;
351 gate |= (1 << unit);
352 } else {
353 if (!(gate & (1 << unit)))
354 goto already;
355 gate &= ~(1 << unit);
356 }
357
358 switch (mode) {
359 case 1:
360 smc501_writel(gate, sm->regs + SM501_POWER_MODE_0_GATE);
361 smc501_writel(clock, sm->regs + SM501_POWER_MODE_0_CLOCK);
362 mode = 0;
363 break;
364 case 2:
365 case 0:
366 smc501_writel(gate, sm->regs + SM501_POWER_MODE_1_GATE);
367 smc501_writel(clock, sm->regs + SM501_POWER_MODE_1_CLOCK);
368 mode = 1;
369 break;
370
371 default:
372 gate = -1;
373 goto already;
374 }
375
376 smc501_writel(mode, sm->regs + SM501_POWER_MODE_CONTROL);
377 sm501_sync_regs(sm);
378
379 dev_dbg(sm->dev, "gate %08lx, clock %08lx, mode %08lx\n",
380 gate, clock, mode);
381
382 sm501_mdelay(sm, 16);
383
384 already:
385 mutex_unlock(&sm->clock_lock);
386 return gate;
387 }
388
389 EXPORT_SYMBOL_GPL(sm501_unit_power);
390
391 /* clock value structure. */
392 struct sm501_clock {
393 unsigned long mclk;
394 int divider;
395 int shift;
396 unsigned int m, n, k;
397 };
398
399 /* sm501_calc_clock
400 *
401 * Calculates the nearest discrete clock frequency that
402 * can be achieved with the specified input clock.
403 * the maximum divisor is 3 or 5
404 */
405
406 static int sm501_calc_clock(unsigned long freq,
407 struct sm501_clock *clock,
408 int max_div,
409 unsigned long mclk,
410 long *best_diff)
411 {
412 int ret = 0;
413 int divider;
414 int shift;
415 long diff;
416
417 /* try dividers 1 and 3 for CRT and for panel,
418 try divider 5 for panel only.*/
419
420 for (divider = 1; divider <= max_div; divider += 2) {
421 /* try all 8 shift values.*/
422 for (shift = 0; shift < 8; shift++) {
423 /* Calculate difference to requested clock */
424 diff = DIV_ROUND_CLOSEST(mclk, divider << shift) - freq;
425 if (diff < 0)
426 diff = -diff;
427
428 /* If it is less than the current, use it */
429 if (diff < *best_diff) {
430 *best_diff = diff;
431
432 clock->mclk = mclk;
433 clock->divider = divider;
434 clock->shift = shift;
435 ret = 1;
436 }
437 }
438 }
439
440 return ret;
441 }
442
443 /* sm501_calc_pll
444 *
445 * Calculates the nearest discrete clock frequency that can be
446 * achieved using the programmable PLL.
447 * the maximum divisor is 3 or 5
448 */
449
450 static unsigned long sm501_calc_pll(unsigned long freq,
451 struct sm501_clock *clock,
452 int max_div)
453 {
454 unsigned long mclk;
455 unsigned int m, n, k;
456 long best_diff = 999999999;
457
458 /*
459 * The SM502 datasheet doesn't specify the min/max values for M and N.
460 * N = 1 at least doesn't work in practice.
461 */
462 for (m = 2; m <= 255; m++) {
463 for (n = 2; n <= 127; n++) {
464 for (k = 0; k <= 1; k++) {
465 mclk = (24000000UL * m / n) >> k;
466
467 if (sm501_calc_clock(freq, clock, max_div,
468 mclk, &best_diff)) {
469 clock->m = m;
470 clock->n = n;
471 clock->k = k;
472 }
473 }
474 }
475 }
476
477 /* Return best clock. */
478 return clock->mclk / (clock->divider << clock->shift);
479 }
480
481 /* sm501_select_clock
482 *
483 * Calculates the nearest discrete clock frequency that can be
484 * achieved using the 288MHz and 336MHz PLLs.
485 * the maximum divisor is 3 or 5
486 */
487
488 static unsigned long sm501_select_clock(unsigned long freq,
489 struct sm501_clock *clock,
490 int max_div)
491 {
492 unsigned long mclk;
493 long best_diff = 999999999;
494
495 /* Try 288MHz and 336MHz clocks. */
496 for (mclk = 288000000; mclk <= 336000000; mclk += 48000000) {
497 sm501_calc_clock(freq, clock, max_div, mclk, &best_diff);
498 }
499
500 /* Return best clock. */
501 return clock->mclk / (clock->divider << clock->shift);
502 }
503
504 /* sm501_set_clock
505 *
506 * set one of the four clock sources to the closest available frequency to
507 * the one specified
508 */
509
510 unsigned long sm501_set_clock(struct device *dev,
511 int clksrc,
512 unsigned long req_freq)
513 {
514 struct sm501_devdata *sm = dev_get_drvdata(dev);
515 unsigned long mode = smc501_readl(sm->regs + SM501_POWER_MODE_CONTROL);
516 unsigned long gate = smc501_readl(sm->regs + SM501_CURRENT_GATE);
517 unsigned long clock = smc501_readl(sm->regs + SM501_CURRENT_CLOCK);
518 unsigned int pll_reg = 0;
519 unsigned long sm501_freq; /* the actual frequency achieved */
520 u64 reg;
521
522 struct sm501_clock to;
523
524 /* find achivable discrete frequency and setup register value
525 * accordingly, V2XCLK, MCLK and M1XCLK are the same P2XCLK
526 * has an extra bit for the divider */
527
528 switch (clksrc) {
529 case SM501_CLOCK_P2XCLK:
530 /* This clock is divided in half so to achieve the
531 * requested frequency the value must be multiplied by
532 * 2. This clock also has an additional pre divisor */
533
534 if (sm->rev >= 0xC0) {
535 /* SM502 -> use the programmable PLL */
536 sm501_freq = (sm501_calc_pll(2 * req_freq,
537 &to, 5) / 2);
538 reg = to.shift & 0x07;/* bottom 3 bits are shift */
539 if (to.divider == 3)
540 reg |= 0x08; /* /3 divider required */
541 else if (to.divider == 5)
542 reg |= 0x10; /* /5 divider required */
543 reg |= 0x40; /* select the programmable PLL */
544 pll_reg = 0x20000 | (to.k << 15) | (to.n << 8) | to.m;
545 } else {
546 sm501_freq = (sm501_select_clock(2 * req_freq,
547 &to, 5) / 2);
548 reg = to.shift & 0x07;/* bottom 3 bits are shift */
549 if (to.divider == 3)
550 reg |= 0x08; /* /3 divider required */
551 else if (to.divider == 5)
552 reg |= 0x10; /* /5 divider required */
553 if (to.mclk != 288000000)
554 reg |= 0x20; /* which mclk pll is source */
555 }
556 break;
557
558 case SM501_CLOCK_V2XCLK:
559 /* This clock is divided in half so to achieve the
560 * requested frequency the value must be multiplied by 2. */
561
562 sm501_freq = (sm501_select_clock(2 * req_freq, &to, 3) / 2);
563 reg=to.shift & 0x07; /* bottom 3 bits are shift */
564 if (to.divider == 3)
565 reg |= 0x08; /* /3 divider required */
566 if (to.mclk != 288000000)
567 reg |= 0x10; /* which mclk pll is source */
568 break;
569
570 case SM501_CLOCK_MCLK:
571 case SM501_CLOCK_M1XCLK:
572 /* These clocks are the same and not further divided */
573
574 sm501_freq = sm501_select_clock( req_freq, &to, 3);
575 reg=to.shift & 0x07; /* bottom 3 bits are shift */
576 if (to.divider == 3)
577 reg |= 0x08; /* /3 divider required */
578 if (to.mclk != 288000000)
579 reg |= 0x10; /* which mclk pll is source */
580 break;
581
582 default:
583 return 0; /* this is bad */
584 }
585
586 mutex_lock(&sm->clock_lock);
587
588 mode = smc501_readl(sm->regs + SM501_POWER_MODE_CONTROL);
589 gate = smc501_readl(sm->regs + SM501_CURRENT_GATE);
590 clock = smc501_readl(sm->regs + SM501_CURRENT_CLOCK);
591
592 clock = clock & ~(0xFF << clksrc);
593 clock |= reg<<clksrc;
594
595 mode &= 3; /* find current mode */
596
597 switch (mode) {
598 case 1:
599 smc501_writel(gate, sm->regs + SM501_POWER_MODE_0_GATE);
600 smc501_writel(clock, sm->regs + SM501_POWER_MODE_0_CLOCK);
601 mode = 0;
602 break;
603 case 2:
604 case 0:
605 smc501_writel(gate, sm->regs + SM501_POWER_MODE_1_GATE);
606 smc501_writel(clock, sm->regs + SM501_POWER_MODE_1_CLOCK);
607 mode = 1;
608 break;
609
610 default:
611 mutex_unlock(&sm->clock_lock);
612 return -1;
613 }
614
615 smc501_writel(mode, sm->regs + SM501_POWER_MODE_CONTROL);
616
617 if (pll_reg)
618 smc501_writel(pll_reg,
619 sm->regs + SM501_PROGRAMMABLE_PLL_CONTROL);
620
621 sm501_sync_regs(sm);
622
623 dev_dbg(sm->dev, "gate %08lx, clock %08lx, mode %08lx\n",
624 gate, clock, mode);
625
626 sm501_mdelay(sm, 16);
627 mutex_unlock(&sm->clock_lock);
628
629 sm501_dump_clk(sm);
630
631 return sm501_freq;
632 }
633
634 EXPORT_SYMBOL_GPL(sm501_set_clock);
635
636 /* sm501_find_clock
637 *
638 * finds the closest available frequency for a given clock
639 */
640
641 unsigned long sm501_find_clock(struct device *dev,
642 int clksrc,
643 unsigned long req_freq)
644 {
645 struct sm501_devdata *sm = dev_get_drvdata(dev);
646 unsigned long sm501_freq; /* the frequency achieveable by the 501 */
647 struct sm501_clock to;
648
649 switch (clksrc) {
650 case SM501_CLOCK_P2XCLK:
651 if (sm->rev >= 0xC0) {
652 /* SM502 -> use the programmable PLL */
653 sm501_freq = (sm501_calc_pll(2 * req_freq,
654 &to, 5) / 2);
655 } else {
656 sm501_freq = (sm501_select_clock(2 * req_freq,
657 &to, 5) / 2);
658 }
659 break;
660
661 case SM501_CLOCK_V2XCLK:
662 sm501_freq = (sm501_select_clock(2 * req_freq, &to, 3) / 2);
663 break;
664
665 case SM501_CLOCK_MCLK:
666 case SM501_CLOCK_M1XCLK:
667 sm501_freq = sm501_select_clock(req_freq, &to, 3);
668 break;
669
670 default:
671 sm501_freq = 0; /* error */
672 }
673
674 return sm501_freq;
675 }
676
677 EXPORT_SYMBOL_GPL(sm501_find_clock);
678
679 static struct sm501_device *to_sm_device(struct platform_device *pdev)
680 {
681 return container_of(pdev, struct sm501_device, pdev);
682 }
683
684 /* sm501_device_release
685 *
686 * A release function for the platform devices we create to allow us to
687 * free any items we allocated
688 */
689
690 static void sm501_device_release(struct device *dev)
691 {
692 kfree(to_sm_device(to_platform_device(dev)));
693 }
694
695 /* sm501_create_subdev
696 *
697 * Create a skeleton platform device with resources for passing to a
698 * sub-driver
699 */
700
701 static struct platform_device *
702 sm501_create_subdev(struct sm501_devdata *sm, char *name,
703 unsigned int res_count, unsigned int platform_data_size)
704 {
705 struct sm501_device *smdev;
706
707 smdev = kzalloc(sizeof(struct sm501_device) +
708 (sizeof(struct resource) * res_count) +
709 platform_data_size, GFP_KERNEL);
710 if (!smdev)
711 return NULL;
712
713 smdev->pdev.dev.release = sm501_device_release;
714
715 smdev->pdev.name = name;
716 smdev->pdev.id = sm->pdev_id;
717 smdev->pdev.dev.parent = sm->dev;
718 smdev->pdev.dev.coherent_dma_mask = 0xffffffff;
719
720 if (res_count) {
721 smdev->pdev.resource = (struct resource *)(smdev+1);
722 smdev->pdev.num_resources = res_count;
723 }
724 if (platform_data_size)
725 smdev->pdev.dev.platform_data = (void *)(smdev+1);
726
727 return &smdev->pdev;
728 }
729
730 /* sm501_register_device
731 *
732 * Register a platform device created with sm501_create_subdev()
733 */
734
735 static int sm501_register_device(struct sm501_devdata *sm,
736 struct platform_device *pdev)
737 {
738 struct sm501_device *smdev = to_sm_device(pdev);
739 int ptr;
740 int ret;
741
742 for (ptr = 0; ptr < pdev->num_resources; ptr++) {
743 printk(KERN_DEBUG "%s[%d] %pR\n",
744 pdev->name, ptr, &pdev->resource[ptr]);
745 }
746
747 ret = platform_device_register(pdev);
748
749 if (ret >= 0) {
750 dev_dbg(sm->dev, "registered %s\n", pdev->name);
751 list_add_tail(&smdev->list, &sm->devices);
752 } else
753 dev_err(sm->dev, "error registering %s (%d)\n",
754 pdev->name, ret);
755
756 return ret;
757 }
758
759 /* sm501_create_subio
760 *
761 * Fill in an IO resource for a sub device
762 */
763
764 static void sm501_create_subio(struct sm501_devdata *sm,
765 struct resource *res,
766 resource_size_t offs,
767 resource_size_t size)
768 {
769 res->flags = IORESOURCE_MEM;
770 res->parent = sm->io_res;
771 res->start = sm->io_res->start + offs;
772 res->end = res->start + size - 1;
773 }
774
775 /* sm501_create_mem
776 *
777 * Fill in an MEM resource for a sub device
778 */
779
780 static void sm501_create_mem(struct sm501_devdata *sm,
781 struct resource *res,
782 resource_size_t *offs,
783 resource_size_t size)
784 {
785 *offs -= size; /* adjust memory size */
786
787 res->flags = IORESOURCE_MEM;
788 res->parent = sm->mem_res;
789 res->start = sm->mem_res->start + *offs;
790 res->end = res->start + size - 1;
791 }
792
793 /* sm501_create_irq
794 *
795 * Fill in an IRQ resource for a sub device
796 */
797
798 static void sm501_create_irq(struct sm501_devdata *sm,
799 struct resource *res)
800 {
801 res->flags = IORESOURCE_IRQ;
802 res->parent = NULL;
803 res->start = res->end = sm->irq;
804 }
805
806 static int sm501_register_usbhost(struct sm501_devdata *sm,
807 resource_size_t *mem_avail)
808 {
809 struct platform_device *pdev;
810
811 pdev = sm501_create_subdev(sm, "sm501-usb", 3, 0);
812 if (!pdev)
813 return -ENOMEM;
814
815 sm501_create_subio(sm, &pdev->resource[0], 0x40000, 0x20000);
816 sm501_create_mem(sm, &pdev->resource[1], mem_avail, 256*1024);
817 sm501_create_irq(sm, &pdev->resource[2]);
818
819 return sm501_register_device(sm, pdev);
820 }
821
822 static void sm501_setup_uart_data(struct sm501_devdata *sm,
823 struct plat_serial8250_port *uart_data,
824 unsigned int offset)
825 {
826 uart_data->membase = sm->regs + offset;
827 uart_data->mapbase = sm->io_res->start + offset;
828 uart_data->iotype = UPIO_MEM;
829 uart_data->irq = sm->irq;
830 uart_data->flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ;
831 uart_data->regshift = 2;
832 uart_data->uartclk = (9600 * 16);
833 }
834
835 static int sm501_register_uart(struct sm501_devdata *sm, int devices)
836 {
837 struct platform_device *pdev;
838 struct plat_serial8250_port *uart_data;
839
840 pdev = sm501_create_subdev(sm, "serial8250", 0,
841 sizeof(struct plat_serial8250_port) * 3);
842 if (!pdev)
843 return -ENOMEM;
844
845 uart_data = dev_get_platdata(&pdev->dev);
846
847 if (devices & SM501_USE_UART0) {
848 sm501_setup_uart_data(sm, uart_data++, 0x30000);
849 sm501_unit_power(sm->dev, SM501_GATE_UART0, 1);
850 sm501_modify_reg(sm->dev, SM501_IRQ_MASK, 1 << 12, 0);
851 sm501_modify_reg(sm->dev, SM501_GPIO63_32_CONTROL, 0x01e0, 0);
852 }
853 if (devices & SM501_USE_UART1) {
854 sm501_setup_uart_data(sm, uart_data++, 0x30020);
855 sm501_unit_power(sm->dev, SM501_GATE_UART1, 1);
856 sm501_modify_reg(sm->dev, SM501_IRQ_MASK, 1 << 13, 0);
857 sm501_modify_reg(sm->dev, SM501_GPIO63_32_CONTROL, 0x1e00, 0);
858 }
859
860 pdev->id = PLAT8250_DEV_SM501;
861
862 return sm501_register_device(sm, pdev);
863 }
864
865 static int sm501_register_display(struct sm501_devdata *sm,
866 resource_size_t *mem_avail)
867 {
868 struct platform_device *pdev;
869
870 pdev = sm501_create_subdev(sm, "sm501-fb", 4, 0);
871 if (!pdev)
872 return -ENOMEM;
873
874 sm501_create_subio(sm, &pdev->resource[0], 0x80000, 0x10000);
875 sm501_create_subio(sm, &pdev->resource[1], 0x100000, 0x50000);
876 sm501_create_mem(sm, &pdev->resource[2], mem_avail, *mem_avail);
877 sm501_create_irq(sm, &pdev->resource[3]);
878
879 return sm501_register_device(sm, pdev);
880 }
881
882 #ifdef CONFIG_MFD_SM501_GPIO
883
884 static inline struct sm501_devdata *sm501_gpio_to_dev(struct sm501_gpio *gpio)
885 {
886 return container_of(gpio, struct sm501_devdata, gpio);
887 }
888
889 static int sm501_gpio_get(struct gpio_chip *chip, unsigned offset)
890
891 {
892 struct sm501_gpio_chip *smgpio = gpiochip_get_data(chip);
893 unsigned long result;
894
895 result = smc501_readl(smgpio->regbase + SM501_GPIO_DATA_LOW);
896 result >>= offset;
897
898 return result & 1UL;
899 }
900
901 static void sm501_gpio_ensure_gpio(struct sm501_gpio_chip *smchip,
902 unsigned long bit)
903 {
904 unsigned long ctrl;
905
906 /* check and modify if this pin is not set as gpio. */
907
908 if (smc501_readl(smchip->control) & bit) {
909 dev_info(sm501_gpio_to_dev(smchip->ourgpio)->dev,
910 "changing mode of gpio, bit %08lx\n", bit);
911
912 ctrl = smc501_readl(smchip->control);
913 ctrl &= ~bit;
914 smc501_writel(ctrl, smchip->control);
915
916 sm501_sync_regs(sm501_gpio_to_dev(smchip->ourgpio));
917 }
918 }
919
920 static void sm501_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
921
922 {
923 struct sm501_gpio_chip *smchip = gpiochip_get_data(chip);
924 struct sm501_gpio *smgpio = smchip->ourgpio;
925 unsigned long bit = 1 << offset;
926 void __iomem *regs = smchip->regbase;
927 unsigned long save;
928 unsigned long val;
929
930 dev_dbg(sm501_gpio_to_dev(smgpio)->dev, "%s(%p,%d)\n",
931 __func__, chip, offset);
932
933 spin_lock_irqsave(&smgpio->lock, save);
934
935 val = smc501_readl(regs + SM501_GPIO_DATA_LOW) & ~bit;
936 if (value)
937 val |= bit;
938 smc501_writel(val, regs);
939
940 sm501_sync_regs(sm501_gpio_to_dev(smgpio));
941 sm501_gpio_ensure_gpio(smchip, bit);
942
943 spin_unlock_irqrestore(&smgpio->lock, save);
944 }
945
946 static int sm501_gpio_input(struct gpio_chip *chip, unsigned offset)
947 {
948 struct sm501_gpio_chip *smchip = gpiochip_get_data(chip);
949 struct sm501_gpio *smgpio = smchip->ourgpio;
950 void __iomem *regs = smchip->regbase;
951 unsigned long bit = 1 << offset;
952 unsigned long save;
953 unsigned long ddr;
954
955 dev_dbg(sm501_gpio_to_dev(smgpio)->dev, "%s(%p,%d)\n",
956 __func__, chip, offset);
957
958 spin_lock_irqsave(&smgpio->lock, save);
959
960 ddr = smc501_readl(regs + SM501_GPIO_DDR_LOW);
961 smc501_writel(ddr & ~bit, regs + SM501_GPIO_DDR_LOW);
962
963 sm501_sync_regs(sm501_gpio_to_dev(smgpio));
964 sm501_gpio_ensure_gpio(smchip, bit);
965
966 spin_unlock_irqrestore(&smgpio->lock, save);
967
968 return 0;
969 }
970
971 static int sm501_gpio_output(struct gpio_chip *chip,
972 unsigned offset, int value)
973 {
974 struct sm501_gpio_chip *smchip = gpiochip_get_data(chip);
975 struct sm501_gpio *smgpio = smchip->ourgpio;
976 unsigned long bit = 1 << offset;
977 void __iomem *regs = smchip->regbase;
978 unsigned long save;
979 unsigned long val;
980 unsigned long ddr;
981
982 dev_dbg(sm501_gpio_to_dev(smgpio)->dev, "%s(%p,%d,%d)\n",
983 __func__, chip, offset, value);
984
985 spin_lock_irqsave(&smgpio->lock, save);
986
987 val = smc501_readl(regs + SM501_GPIO_DATA_LOW);
988 if (value)
989 val |= bit;
990 else
991 val &= ~bit;
992 smc501_writel(val, regs);
993
994 ddr = smc501_readl(regs + SM501_GPIO_DDR_LOW);
995 smc501_writel(ddr | bit, regs + SM501_GPIO_DDR_LOW);
996
997 sm501_sync_regs(sm501_gpio_to_dev(smgpio));
998 smc501_writel(val, regs + SM501_GPIO_DATA_LOW);
999
1000 sm501_sync_regs(sm501_gpio_to_dev(smgpio));
1001 spin_unlock_irqrestore(&smgpio->lock, save);
1002
1003 return 0;
1004 }
1005
1006 static const struct gpio_chip gpio_chip_template = {
1007 .ngpio = 32,
1008 .direction_input = sm501_gpio_input,
1009 .direction_output = sm501_gpio_output,
1010 .set = sm501_gpio_set,
1011 .get = sm501_gpio_get,
1012 };
1013
1014 static int sm501_gpio_register_chip(struct sm501_devdata *sm,
1015 struct sm501_gpio *gpio,
1016 struct sm501_gpio_chip *chip)
1017 {
1018 struct sm501_platdata *pdata = sm->platdata;
1019 struct gpio_chip *gchip = &chip->gpio;
1020 int base = pdata->gpio_base;
1021
1022 chip->gpio = gpio_chip_template;
1023
1024 if (chip == &gpio->high) {
1025 if (base > 0)
1026 base += 32;
1027 chip->regbase = gpio->regs + SM501_GPIO_DATA_HIGH;
1028 chip->control = sm->regs + SM501_GPIO63_32_CONTROL;
1029 gchip->label = "SM501-HIGH";
1030 } else {
1031 chip->regbase = gpio->regs + SM501_GPIO_DATA_LOW;
1032 chip->control = sm->regs + SM501_GPIO31_0_CONTROL;
1033 gchip->label = "SM501-LOW";
1034 }
1035
1036 gchip->base = base;
1037 chip->ourgpio = gpio;
1038
1039 return gpiochip_add_data(gchip, chip);
1040 }
1041
1042 static int sm501_register_gpio(struct sm501_devdata *sm)
1043 {
1044 struct sm501_gpio *gpio = &sm->gpio;
1045 resource_size_t iobase = sm->io_res->start + SM501_GPIO;
1046 int ret;
1047
1048 dev_dbg(sm->dev, "registering gpio block %08llx\n",
1049 (unsigned long long)iobase);
1050
1051 spin_lock_init(&gpio->lock);
1052
1053 gpio->regs_res = request_mem_region(iobase, 0x20, "sm501-gpio");
1054 if (!gpio->regs_res) {
1055 dev_err(sm->dev, "gpio: failed to request region\n");
1056 return -ENXIO;
1057 }
1058
1059 gpio->regs = ioremap(iobase, 0x20);
1060 if (!gpio->regs) {
1061 dev_err(sm->dev, "gpio: failed to remap registers\n");
1062 ret = -ENXIO;
1063 goto err_claimed;
1064 }
1065
1066 /* Register both our chips. */
1067
1068 ret = sm501_gpio_register_chip(sm, gpio, &gpio->low);
1069 if (ret) {
1070 dev_err(sm->dev, "failed to add low chip\n");
1071 goto err_mapped;
1072 }
1073
1074 ret = sm501_gpio_register_chip(sm, gpio, &gpio->high);
1075 if (ret) {
1076 dev_err(sm->dev, "failed to add high chip\n");
1077 goto err_low_chip;
1078 }
1079
1080 gpio->registered = 1;
1081
1082 return 0;
1083
1084 err_low_chip:
1085 gpiochip_remove(&gpio->low.gpio);
1086
1087 err_mapped:
1088 iounmap(gpio->regs);
1089
1090 err_claimed:
1091 release_resource(gpio->regs_res);
1092 kfree(gpio->regs_res);
1093
1094 return ret;
1095 }
1096
1097 static void sm501_gpio_remove(struct sm501_devdata *sm)
1098 {
1099 struct sm501_gpio *gpio = &sm->gpio;
1100
1101 if (!sm->gpio.registered)
1102 return;
1103
1104 gpiochip_remove(&gpio->low.gpio);
1105 gpiochip_remove(&gpio->high.gpio);
1106
1107 iounmap(gpio->regs);
1108 release_resource(gpio->regs_res);
1109 kfree(gpio->regs_res);
1110 }
1111
1112 static inline int sm501_gpio_isregistered(struct sm501_devdata *sm)
1113 {
1114 return sm->gpio.registered;
1115 }
1116 #else
1117 static inline int sm501_register_gpio(struct sm501_devdata *sm)
1118 {
1119 return 0;
1120 }
1121
1122 static inline void sm501_gpio_remove(struct sm501_devdata *sm)
1123 {
1124 }
1125
1126 static inline int sm501_gpio_isregistered(struct sm501_devdata *sm)
1127 {
1128 return 0;
1129 }
1130 #endif
1131
1132 static int sm501_register_gpio_i2c_instance(struct sm501_devdata *sm,
1133 struct sm501_platdata_gpio_i2c *iic)
1134 {
1135 struct i2c_gpio_platform_data *icd;
1136 struct platform_device *pdev;
1137 struct gpiod_lookup_table *lookup;
1138
1139 pdev = sm501_create_subdev(sm, "i2c-gpio", 0,
1140 sizeof(struct i2c_gpio_platform_data));
1141 if (!pdev)
1142 return -ENOMEM;
1143
1144 /* Create a gpiod lookup using gpiochip-local offsets */
1145 lookup = devm_kzalloc(&pdev->dev, struct_size(lookup, table, 3),
1146 GFP_KERNEL);
1147 if (!lookup)
1148 return -ENOMEM;
1149
1150 lookup->dev_id = "i2c-gpio";
1151 if (iic->pin_sda < 32)
1152 lookup->table[0].chip_label = "SM501-LOW";
1153 else
1154 lookup->table[0].chip_label = "SM501-HIGH";
1155 lookup->table[0].chip_hwnum = iic->pin_sda % 32;
1156 lookup->table[0].con_id = NULL;
1157 lookup->table[0].idx = 0;
1158 lookup->table[0].flags = GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN;
1159 if (iic->pin_scl < 32)
1160 lookup->table[1].chip_label = "SM501-LOW";
1161 else
1162 lookup->table[1].chip_label = "SM501-HIGH";
1163 lookup->table[1].chip_hwnum = iic->pin_scl % 32;
1164 lookup->table[1].con_id = NULL;
1165 lookup->table[1].idx = 1;
1166 lookup->table[1].flags = GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN;
1167 gpiod_add_lookup_table(lookup);
1168
1169 icd = dev_get_platdata(&pdev->dev);
1170 icd->timeout = iic->timeout;
1171 icd->udelay = iic->udelay;
1172
1173 /* note, we can't use either of the pin numbers, as the i2c-gpio
1174 * driver uses the platform.id field to generate the bus number
1175 * to register with the i2c core; The i2c core doesn't have enough
1176 * entries to deal with anything we currently use.
1177 */
1178
1179 pdev->id = iic->bus_num;
1180
1181 dev_info(sm->dev, "registering i2c-%d: sda=%d, scl=%d\n",
1182 iic->bus_num,
1183 iic->pin_sda, iic->pin_scl);
1184
1185 return sm501_register_device(sm, pdev);
1186 }
1187
1188 static int sm501_register_gpio_i2c(struct sm501_devdata *sm,
1189 struct sm501_platdata *pdata)
1190 {
1191 struct sm501_platdata_gpio_i2c *iic = pdata->gpio_i2c;
1192 int index;
1193 int ret;
1194
1195 for (index = 0; index < pdata->gpio_i2c_nr; index++, iic++) {
1196 ret = sm501_register_gpio_i2c_instance(sm, iic);
1197 if (ret < 0)
1198 return ret;
1199 }
1200
1201 return 0;
1202 }
1203
1204 /* sm501_dbg_regs
1205 *
1206 * Debug attribute to attach to parent device to show core registers
1207 */
1208
1209 static ssize_t sm501_dbg_regs(struct device *dev,
1210 struct device_attribute *attr, char *buff)
1211 {
1212 struct sm501_devdata *sm = dev_get_drvdata(dev) ;
1213 unsigned int reg;
1214 char *ptr = buff;
1215 int ret;
1216
1217 for (reg = 0x00; reg < 0x70; reg += 4) {
1218 ret = sprintf(ptr, "%08x = %08x\n",
1219 reg, smc501_readl(sm->regs + reg));
1220 ptr += ret;
1221 }
1222
1223 return ptr - buff;
1224 }
1225
1226
1227 static DEVICE_ATTR(dbg_regs, 0444, sm501_dbg_regs, NULL);
1228
1229 /* sm501_init_reg
1230 *
1231 * Helper function for the init code to setup a register
1232 *
1233 * clear the bits which are set in r->mask, and then set
1234 * the bits set in r->set.
1235 */
1236
1237 static inline void sm501_init_reg(struct sm501_devdata *sm,
1238 unsigned long reg,
1239 struct sm501_reg_init *r)
1240 {
1241 unsigned long tmp;
1242
1243 tmp = smc501_readl(sm->regs + reg);
1244 tmp &= ~r->mask;
1245 tmp |= r->set;
1246 smc501_writel(tmp, sm->regs + reg);
1247 }
1248
1249 /* sm501_init_regs
1250 *
1251 * Setup core register values
1252 */
1253
1254 static void sm501_init_regs(struct sm501_devdata *sm,
1255 struct sm501_initdata *init)
1256 {
1257 sm501_misc_control(sm->dev,
1258 init->misc_control.set,
1259 init->misc_control.mask);
1260
1261 sm501_init_reg(sm, SM501_MISC_TIMING, &init->misc_timing);
1262 sm501_init_reg(sm, SM501_GPIO31_0_CONTROL, &init->gpio_low);
1263 sm501_init_reg(sm, SM501_GPIO63_32_CONTROL, &init->gpio_high);
1264
1265 if (init->m1xclk) {
1266 dev_info(sm->dev, "setting M1XCLK to %ld\n", init->m1xclk);
1267 sm501_set_clock(sm->dev, SM501_CLOCK_M1XCLK, init->m1xclk);
1268 }
1269
1270 if (init->mclk) {
1271 dev_info(sm->dev, "setting MCLK to %ld\n", init->mclk);
1272 sm501_set_clock(sm->dev, SM501_CLOCK_MCLK, init->mclk);
1273 }
1274
1275 }
1276
1277 /* Check the PLL sources for the M1CLK and M1XCLK
1278 *
1279 * If the M1CLK and M1XCLKs are not sourced from the same PLL, then
1280 * there is a risk (see errata AB-5) that the SM501 will cease proper
1281 * function. If this happens, then it is likely the SM501 will
1282 * hang the system.
1283 */
1284
1285 static int sm501_check_clocks(struct sm501_devdata *sm)
1286 {
1287 unsigned long pwrmode = smc501_readl(sm->regs + SM501_CURRENT_CLOCK);
1288 unsigned long msrc = (pwrmode & SM501_POWERMODE_M_SRC);
1289 unsigned long m1src = (pwrmode & SM501_POWERMODE_M1_SRC);
1290
1291 return ((msrc == 0 && m1src != 0) || (msrc != 0 && m1src == 0));
1292 }
1293
1294 static unsigned int sm501_mem_local[] = {
1295 [0] = 4*1024*1024,
1296 [1] = 8*1024*1024,
1297 [2] = 16*1024*1024,
1298 [3] = 32*1024*1024,
1299 [4] = 64*1024*1024,
1300 [5] = 2*1024*1024,
1301 };
1302
1303 /* sm501_init_dev
1304 *
1305 * Common init code for an SM501
1306 */
1307
1308 static int sm501_init_dev(struct sm501_devdata *sm)
1309 {
1310 struct sm501_initdata *idata;
1311 struct sm501_platdata *pdata;
1312 resource_size_t mem_avail;
1313 unsigned long dramctrl;
1314 unsigned long devid;
1315 int ret;
1316
1317 mutex_init(&sm->clock_lock);
1318 spin_lock_init(&sm->reg_lock);
1319
1320 INIT_LIST_HEAD(&sm->devices);
1321
1322 devid = smc501_readl(sm->regs + SM501_DEVICEID);
1323
1324 if ((devid & SM501_DEVICEID_IDMASK) != SM501_DEVICEID_SM501) {
1325 dev_err(sm->dev, "incorrect device id %08lx\n", devid);
1326 return -EINVAL;
1327 }
1328
1329 /* disable irqs */
1330 smc501_writel(0, sm->regs + SM501_IRQ_MASK);
1331
1332 dramctrl = smc501_readl(sm->regs + SM501_DRAM_CONTROL);
1333 mem_avail = sm501_mem_local[(dramctrl >> 13) & 0x7];
1334
1335 dev_info(sm->dev, "SM501 At %p: Version %08lx, %ld Mb, IRQ %d\n",
1336 sm->regs, devid, (unsigned long)mem_avail >> 20, sm->irq);
1337
1338 sm->rev = devid & SM501_DEVICEID_REVMASK;
1339
1340 sm501_dump_gate(sm);
1341
1342 ret = device_create_file(sm->dev, &dev_attr_dbg_regs);
1343 if (ret)
1344 dev_err(sm->dev, "failed to create debug regs file\n");
1345
1346 sm501_dump_clk(sm);
1347
1348 /* check to see if we have some device initialisation */
1349
1350 pdata = sm->platdata;
1351 idata = pdata ? pdata->init : NULL;
1352
1353 if (idata) {
1354 sm501_init_regs(sm, idata);
1355
1356 if (idata->devices & SM501_USE_USB_HOST)
1357 sm501_register_usbhost(sm, &mem_avail);
1358 if (idata->devices & (SM501_USE_UART0 | SM501_USE_UART1))
1359 sm501_register_uart(sm, idata->devices);
1360 if (idata->devices & SM501_USE_GPIO)
1361 sm501_register_gpio(sm);
1362 }
1363
1364 if (pdata && pdata->gpio_i2c && pdata->gpio_i2c_nr > 0) {
1365 if (!sm501_gpio_isregistered(sm))
1366 dev_err(sm->dev, "no gpio available for i2c gpio.\n");
1367 else
1368 sm501_register_gpio_i2c(sm, pdata);
1369 }
1370
1371 ret = sm501_check_clocks(sm);
1372 if (ret) {
1373 dev_err(sm->dev, "M1X and M clocks sourced from different "
1374 "PLLs\n");
1375 return -EINVAL;
1376 }
1377
1378 /* always create a framebuffer */
1379 sm501_register_display(sm, &mem_avail);
1380
1381 return 0;
1382 }
1383
1384 static int sm501_plat_probe(struct platform_device *dev)
1385 {
1386 struct sm501_devdata *sm;
1387 int ret;
1388
1389 sm = kzalloc(sizeof(*sm), GFP_KERNEL);
1390 if (!sm) {
1391 ret = -ENOMEM;
1392 goto err1;
1393 }
1394
1395 sm->dev = &dev->dev;
1396 sm->pdev_id = dev->id;
1397 sm->platdata = dev_get_platdata(&dev->dev);
1398
1399 ret = platform_get_irq(dev, 0);
1400 if (ret < 0) {
1401 dev_err(&dev->dev, "failed to get irq resource\n");
1402 goto err_res;
1403 }
1404 sm->irq = ret;
1405
1406 sm->io_res = platform_get_resource(dev, IORESOURCE_MEM, 1);
1407 sm->mem_res = platform_get_resource(dev, IORESOURCE_MEM, 0);
1408 if (!sm->io_res || !sm->mem_res) {
1409 dev_err(&dev->dev, "failed to get IO resource\n");
1410 ret = -ENOENT;
1411 goto err_res;
1412 }
1413
1414 sm->regs_claim = request_mem_region(sm->io_res->start,
1415 0x100, "sm501");
1416 if (!sm->regs_claim) {
1417 dev_err(&dev->dev, "cannot claim registers\n");
1418 ret = -EBUSY;
1419 goto err_res;
1420 }
1421
1422 platform_set_drvdata(dev, sm);
1423
1424 sm->regs = ioremap(sm->io_res->start, resource_size(sm->io_res));
1425 if (!sm->regs) {
1426 dev_err(&dev->dev, "cannot remap registers\n");
1427 ret = -EIO;
1428 goto err_claim;
1429 }
1430
1431 return sm501_init_dev(sm);
1432
1433 err_claim:
1434 release_resource(sm->regs_claim);
1435 kfree(sm->regs_claim);
1436 err_res:
1437 kfree(sm);
1438 err1:
1439 return ret;
1440
1441 }
1442
1443 #ifdef CONFIG_PM
1444
1445 /* power management support */
1446
1447 static void sm501_set_power(struct sm501_devdata *sm, int on)
1448 {
1449 struct sm501_platdata *pd = sm->platdata;
1450
1451 if (!pd)
1452 return;
1453
1454 if (pd->get_power) {
1455 if (pd->get_power(sm->dev) == on) {
1456 dev_dbg(sm->dev, "is already %d\n", on);
1457 return;
1458 }
1459 }
1460
1461 if (pd->set_power) {
1462 dev_dbg(sm->dev, "setting power to %d\n", on);
1463
1464 pd->set_power(sm->dev, on);
1465 sm501_mdelay(sm, 10);
1466 }
1467 }
1468
1469 static int sm501_plat_suspend(struct platform_device *pdev, pm_message_t state)
1470 {
1471 struct sm501_devdata *sm = platform_get_drvdata(pdev);
1472
1473 sm->in_suspend = 1;
1474 sm->pm_misc = smc501_readl(sm->regs + SM501_MISC_CONTROL);
1475
1476 sm501_dump_regs(sm);
1477
1478 if (sm->platdata) {
1479 if (sm->platdata->flags & SM501_FLAG_SUSPEND_OFF)
1480 sm501_set_power(sm, 0);
1481 }
1482
1483 return 0;
1484 }
1485
1486 static int sm501_plat_resume(struct platform_device *pdev)
1487 {
1488 struct sm501_devdata *sm = platform_get_drvdata(pdev);
1489
1490 sm501_set_power(sm, 1);
1491
1492 sm501_dump_regs(sm);
1493 sm501_dump_gate(sm);
1494 sm501_dump_clk(sm);
1495
1496 /* check to see if we are in the same state as when suspended */
1497
1498 if (smc501_readl(sm->regs + SM501_MISC_CONTROL) != sm->pm_misc) {
1499 dev_info(sm->dev, "SM501_MISC_CONTROL changed over sleep\n");
1500 smc501_writel(sm->pm_misc, sm->regs + SM501_MISC_CONTROL);
1501
1502 /* our suspend causes the controller state to change,
1503 * either by something attempting setup, power loss,
1504 * or an external reset event on power change */
1505
1506 if (sm->platdata && sm->platdata->init) {
1507 sm501_init_regs(sm, sm->platdata->init);
1508 }
1509 }
1510
1511 /* dump our state from resume */
1512
1513 sm501_dump_regs(sm);
1514 sm501_dump_clk(sm);
1515
1516 sm->in_suspend = 0;
1517
1518 return 0;
1519 }
1520 #else
1521 #define sm501_plat_suspend NULL
1522 #define sm501_plat_resume NULL
1523 #endif
1524
1525 /* Initialisation data for PCI devices */
1526
1527 static struct sm501_initdata sm501_pci_initdata = {
1528 .gpio_high = {
1529 .set = 0x3F000000, /* 24bit panel */
1530 .mask = 0x0,
1531 },
1532 .misc_timing = {
1533 .set = 0x010100, /* SDRAM timing */
1534 .mask = 0x1F1F00,
1535 },
1536 .misc_control = {
1537 .set = SM501_MISC_PNL_24BIT,
1538 .mask = 0,
1539 },
1540
1541 .devices = SM501_USE_ALL,
1542
1543 /* Errata AB-3 says that 72MHz is the fastest available
1544 * for 33MHZ PCI with proper bus-mastering operation */
1545
1546 .mclk = 72 * MHZ,
1547 .m1xclk = 144 * MHZ,
1548 };
1549
1550 static struct sm501_platdata_fbsub sm501_pdata_fbsub = {
1551 .flags = (SM501FB_FLAG_USE_INIT_MODE |
1552 SM501FB_FLAG_USE_HWCURSOR |
1553 SM501FB_FLAG_USE_HWACCEL |
1554 SM501FB_FLAG_DISABLE_AT_EXIT),
1555 };
1556
1557 static struct sm501_platdata_fb sm501_fb_pdata = {
1558 .fb_route = SM501_FB_OWN,
1559 .fb_crt = &sm501_pdata_fbsub,
1560 .fb_pnl = &sm501_pdata_fbsub,
1561 };
1562
1563 static struct sm501_platdata sm501_pci_platdata = {
1564 .init = &sm501_pci_initdata,
1565 .fb = &sm501_fb_pdata,
1566 .gpio_base = -1,
1567 };
1568
1569 static int sm501_pci_probe(struct pci_dev *dev,
1570 const struct pci_device_id *id)
1571 {
1572 struct sm501_devdata *sm;
1573 int err;
1574
1575 sm = kzalloc(sizeof(*sm), GFP_KERNEL);
1576 if (!sm) {
1577 err = -ENOMEM;
1578 goto err1;
1579 }
1580
1581 /* set a default set of platform data */
1582 dev->dev.platform_data = sm->platdata = &sm501_pci_platdata;
1583
1584 /* set a hopefully unique id for our child platform devices */
1585 sm->pdev_id = 32 + dev->devfn;
1586
1587 pci_set_drvdata(dev, sm);
1588
1589 err = pci_enable_device(dev);
1590 if (err) {
1591 dev_err(&dev->dev, "cannot enable device\n");
1592 goto err2;
1593 }
1594
1595 sm->dev = &dev->dev;
1596 sm->irq = dev->irq;
1597
1598 #ifdef __BIG_ENDIAN
1599 /* if the system is big-endian, we most probably have a
1600 * translation in the IO layer making the PCI bus little endian
1601 * so make the framebuffer swapped pixels */
1602
1603 sm501_fb_pdata.flags |= SM501_FBPD_SWAP_FB_ENDIAN;
1604 #endif
1605
1606 /* check our resources */
1607
1608 if (!(pci_resource_flags(dev, 0) & IORESOURCE_MEM)) {
1609 dev_err(&dev->dev, "region #0 is not memory?\n");
1610 err = -EINVAL;
1611 goto err3;
1612 }
1613
1614 if (!(pci_resource_flags(dev, 1) & IORESOURCE_MEM)) {
1615 dev_err(&dev->dev, "region #1 is not memory?\n");
1616 err = -EINVAL;
1617 goto err3;
1618 }
1619
1620 /* make our resources ready for sharing */
1621
1622 sm->io_res = &dev->resource[1];
1623 sm->mem_res = &dev->resource[0];
1624
1625 sm->regs_claim = request_mem_region(sm->io_res->start,
1626 0x100, "sm501");
1627 if (!sm->regs_claim) {
1628 dev_err(&dev->dev, "cannot claim registers\n");
1629 err= -EBUSY;
1630 goto err3;
1631 }
1632
1633 sm->regs = pci_ioremap_bar(dev, 1);
1634 if (!sm->regs) {
1635 dev_err(&dev->dev, "cannot remap registers\n");
1636 err = -EIO;
1637 goto err4;
1638 }
1639
1640 sm501_init_dev(sm);
1641 return 0;
1642
1643 err4:
1644 release_resource(sm->regs_claim);
1645 kfree(sm->regs_claim);
1646 err3:
1647 pci_disable_device(dev);
1648 err2:
1649 kfree(sm);
1650 err1:
1651 return err;
1652 }
1653
1654 static void sm501_remove_sub(struct sm501_devdata *sm,
1655 struct sm501_device *smdev)
1656 {
1657 list_del(&smdev->list);
1658 platform_device_unregister(&smdev->pdev);
1659 }
1660
1661 static void sm501_dev_remove(struct sm501_devdata *sm)
1662 {
1663 struct sm501_device *smdev, *tmp;
1664
1665 list_for_each_entry_safe(smdev, tmp, &sm->devices, list)
1666 sm501_remove_sub(sm, smdev);
1667
1668 device_remove_file(sm->dev, &dev_attr_dbg_regs);
1669
1670 sm501_gpio_remove(sm);
1671 }
1672
1673 static void sm501_pci_remove(struct pci_dev *dev)
1674 {
1675 struct sm501_devdata *sm = pci_get_drvdata(dev);
1676
1677 sm501_dev_remove(sm);
1678 iounmap(sm->regs);
1679
1680 release_resource(sm->regs_claim);
1681 kfree(sm->regs_claim);
1682
1683 pci_disable_device(dev);
1684 }
1685
1686 static int sm501_plat_remove(struct platform_device *dev)
1687 {
1688 struct sm501_devdata *sm = platform_get_drvdata(dev);
1689
1690 sm501_dev_remove(sm);
1691 iounmap(sm->regs);
1692
1693 release_resource(sm->regs_claim);
1694 kfree(sm->regs_claim);
1695
1696 return 0;
1697 }
1698
1699 static const struct pci_device_id sm501_pci_tbl[] = {
1700 { 0x126f, 0x0501, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
1701 { 0, },
1702 };
1703
1704 MODULE_DEVICE_TABLE(pci, sm501_pci_tbl);
1705
1706 static struct pci_driver sm501_pci_driver = {
1707 .name = "sm501",
1708 .id_table = sm501_pci_tbl,
1709 .probe = sm501_pci_probe,
1710 .remove = sm501_pci_remove,
1711 };
1712
1713 MODULE_ALIAS("platform:sm501");
1714
1715 static const struct of_device_id of_sm501_match_tbl[] = {
1716 { .compatible = "smi,sm501", },
1717 { /* end */ }
1718 };
1719 MODULE_DEVICE_TABLE(of, of_sm501_match_tbl);
1720
1721 static struct platform_driver sm501_plat_driver = {
1722 .driver = {
1723 .name = "sm501",
1724 .of_match_table = of_sm501_match_tbl,
1725 },
1726 .probe = sm501_plat_probe,
1727 .remove = sm501_plat_remove,
1728 .suspend = sm501_plat_suspend,
1729 .resume = sm501_plat_resume,
1730 };
1731
1732 static int __init sm501_base_init(void)
1733 {
1734 platform_driver_register(&sm501_plat_driver);
1735 return pci_register_driver(&sm501_pci_driver);
1736 }
1737
1738 static void __exit sm501_base_exit(void)
1739 {
1740 platform_driver_unregister(&sm501_plat_driver);
1741 pci_unregister_driver(&sm501_pci_driver);
1742 }
1743
1744 module_init(sm501_base_init);
1745 module_exit(sm501_base_exit);
1746
1747 MODULE_DESCRIPTION("SM501 Core Driver");
1748 MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>, Vincent Sanders");
1749 MODULE_LICENSE("GPL v2");
Mirror https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git