drivers/mtd/spi/sf_probe.c

   1 /*
   2  * SPI flash probing
   3  *
   4  * Copyright (C) 2008 Atmel Corporation
   5  * Copyright (C) 2010 Reinhard Meyer, EMK Elektronik
   6  * Copyright (C) 2013 Jagannadha Sutradharudu Teki, Xilinx Inc.
   7  *
   8  * SPDX-License-Identifier:     GPL-2.0+
   9  */
  10
  11 #include <common.h>
  12 #include <dm.h>
  13 #include <errno.h>
  14 #include <fdtdec.h>
  15 #include <malloc.h>
  16 #include <mapmem.h>
  17 #include <spi.h>
  18 #include <spi_flash.h>
  19 #include <asm/io.h>
  20
  21 #include "sf_internal.h"
  22
  23 DECLARE_GLOBAL_DATA_PTR;
  24
  25 /* Read commands array */
  26 static u8 spi_read_cmds_array[] = {
  27         CMD_READ_ARRAY_SLOW,
  28         CMD_READ_ARRAY_FAST,
  29         CMD_READ_DUAL_OUTPUT_FAST,
  30         CMD_READ_DUAL_IO_FAST,
  31         CMD_READ_QUAD_OUTPUT_FAST,
  32         CMD_READ_QUAD_IO_FAST,
  33 };
  34
  35 #ifdef CONFIG_SPI_FLASH_MACRONIX
  36 static int spi_flash_set_qeb_mxic(struct spi_flash *flash)
  37 {
  38         u8 qeb_status;
  39         int ret;
  40
  41         ret = spi_flash_cmd_read_status(flash, &qeb_status);
  42         if (ret < 0)
  43                 return ret;
  44
  45         if (qeb_status & STATUS_QEB_MXIC) {
  46                 debug("SF: mxic: QEB is already set\n");
  47         } else {
  48                 ret = spi_flash_cmd_write_status(flash, STATUS_QEB_MXIC);
  49                 if (ret < 0)
  50                         return ret;
  51         }
  52
  53         return ret;
  54 }
  55 #endif
  56
  57 #if defined(CONFIG_SPI_FLASH_SPANSION) || defined(CONFIG_SPI_FLASH_WINBOND)
  58 static int spi_flash_set_qeb_winspan(struct spi_flash *flash)
  59 {
  60         u8 qeb_status;
  61         int ret;
  62
  63         ret = spi_flash_cmd_read_config(flash, &qeb_status);
  64         if (ret < 0)
  65                 return ret;
  66
  67         if (qeb_status & STATUS_QEB_WINSPAN) {
  68                 debug("SF: winspan: QEB is already set\n");
  69         } else {
  70                 ret = spi_flash_cmd_write_config(flash, STATUS_QEB_WINSPAN);
  71                 if (ret < 0)
  72                         return ret;
  73         }
  74
  75         return ret;
  76 }
  77 #endif
  78
  79 static int spi_flash_set_qeb(struct spi_flash *flash, u8 idcode0)
  80 {
  81         switch (idcode0) {
  82 #ifdef CONFIG_SPI_FLASH_MACRONIX
  83         case SPI_FLASH_CFI_MFR_MACRONIX:
  84                 return spi_flash_set_qeb_mxic(flash);
  85 #endif
  86 #if defined(CONFIG_SPI_FLASH_SPANSION) || defined(CONFIG_SPI_FLASH_WINBOND)
  87         case SPI_FLASH_CFI_MFR_SPANSION:
  88         case SPI_FLASH_CFI_MFR_WINBOND:
  89                 return spi_flash_set_qeb_winspan(flash);
  90 #endif
  91 #ifdef CONFIG_SPI_FLASH_STMICRO
  92         case SPI_FLASH_CFI_MFR_STMICRO:
  93                 debug("SF: QEB is volatile for %02x flash\n", idcode0);
  94                 return 0;
  95 #endif
  96         default:
  97                 printf("SF: Need set QEB func for %02x flash\n", idcode0);
  98                 return -1;
  99         }
 100 }
 101
 102 static int spi_flash_validate_params(struct spi_slave *spi, u8 *idcode,
 103                                      struct spi_flash *flash)
 104 {
 105         const struct spi_flash_params *params;
 106         u8 cmd;
 107         u16 jedec = idcode[1] << 8 | idcode[2];
 108         u16 ext_jedec = idcode[3] << 8 | idcode[4];
 109
 110         /* Validate params from spi_flash_params table */
 111         params = spi_flash_params_table;
 112         for (; params->name != NULL; params++) {
 113                 if ((params->jedec >> 16) == idcode[0]) {
 114                         if ((params->jedec & 0xFFFF) == jedec) {
 115                                 if (params->ext_jedec == 0)
 116                                         break;
 117                                 else if (params->ext_jedec == ext_jedec)
 118                                         break;
 119                         }
 120                 }
 121         }
 122
 123         if (!params->name) {
 124                 printf("SF: Unsupported flash IDs: ");
 125                 printf("manuf %02x, jedec %04x, ext_jedec %04x\n",
 126                        idcode[0], jedec, ext_jedec);
 127                 return -EPROTONOSUPPORT;
 128         }
 129
 130         /* Assign spi data */
 131         flash->spi = spi;
 132         flash->name = params->name;
 133         flash->memory_map = spi->memory_map;
 134         flash->dual_flash = flash->spi->option;
 135
 136         /* Assign spi_flash ops */
 137 #ifndef CONFIG_DM_SPI_FLASH
 138         flash->write = spi_flash_cmd_write_ops;
 139 #if defined(CONFIG_SPI_FLASH_SST)
 140         if (params->flags & SST_WR) {
 141                 if (flash->spi->op_mode_tx & SPI_OPM_TX_BP)
 142                         flash->write = sst_write_bp;
 143                 else
 144                         flash->write = sst_write_wp;
 145         }
 146 #endif
 147         flash->erase = spi_flash_cmd_erase_ops;
 148         flash->read = spi_flash_cmd_read_ops;
 149 #endif
 150
 151         /* Compute the flash size */
 152         flash->shift = (flash->dual_flash & SF_DUAL_PARALLEL_FLASH) ? 1 : 0;
 153         /*
 154          * The Spansion S25FL032P and S25FL064P have 256b pages, yet use the
 155          * 0x4d00 Extended JEDEC code. The rest of the Spansion flashes with
 156          * the 0x4d00 Extended JEDEC code have 512b pages. All of the others
 157          * have 256b pages.
 158          */
 159         if (ext_jedec == 0x4d00) {
 160                 if ((jedec == 0x0215) || (jedec == 0x216))
 161                         flash->page_size = 256;
 162                 else
 163                         flash->page_size = 512;
 164         } else {
 165                 flash->page_size = 256;
 166         }
 167         flash->page_size <<= flash->shift;
 168         flash->sector_size = params->sector_size << flash->shift;
 169         flash->size = flash->sector_size * params->nr_sectors << flash->shift;
 170 #ifdef CONFIG_SF_DUAL_FLASH
 171         if (flash->dual_flash & SF_DUAL_STACKED_FLASH)
 172                 flash->size <<= 1;
 173 #endif
 174
 175         /* Compute erase sector and command */
 176         if (params->flags & SECT_4K) {
 177                 flash->erase_cmd = CMD_ERASE_4K;
 178                 flash->erase_size = 4096 << flash->shift;
 179         } else if (params->flags & SECT_32K) {
 180                 flash->erase_cmd = CMD_ERASE_32K;
 181                 flash->erase_size = 32768 << flash->shift;
 182         } else {
 183                 flash->erase_cmd = CMD_ERASE_64K;
 184                 flash->erase_size = flash->sector_size;
 185         }
 186
 187         /* Look for the fastest read cmd */
 188         cmd = fls(params->e_rd_cmd & flash->spi->op_mode_rx);
 189         if (cmd) {
 190                 cmd = spi_read_cmds_array[cmd - 1];
 191                 flash->read_cmd = cmd;
 192         } else {
 193                 /* Go for default supported read cmd */
 194                 flash->read_cmd = CMD_READ_ARRAY_FAST;
 195         }
 196
 197         /* Not require to look for fastest only two write cmds yet */
 198         if (params->flags & WR_QPP && flash->spi->op_mode_tx & SPI_OPM_TX_QPP)
 199                 flash->write_cmd = CMD_QUAD_PAGE_PROGRAM;
 200         else
 201                 /* Go for default supported write cmd */
 202                 flash->write_cmd = CMD_PAGE_PROGRAM;
 203
 204         /* Read dummy_byte: dummy byte is determined based on the
 205          * dummy cycles of a particular command.
 206          * Fast commands - dummy_byte = dummy_cycles/8
 207          * I/O commands- dummy_byte = (dummy_cycles * no.of lines)/8
 208          * For I/O commands except cmd[0] everything goes on no.of lines
 209          * based on particular command but incase of fast commands except
 210          * data all go on single line irrespective of command.
 211          */
 212         switch (flash->read_cmd) {
 213         case CMD_READ_QUAD_IO_FAST:
 214                 flash->dummy_byte = 2;
 215                 break;
 216         case CMD_READ_ARRAY_SLOW:
 217                 flash->dummy_byte = 0;
 218                 break;
 219         default:
 220                 flash->dummy_byte = 1;
 221         }
 222
 223         /* Poll cmd selection */
 224         flash->poll_cmd = CMD_READ_STATUS;
 225 #ifdef CONFIG_SPI_FLASH_STMICRO
 226         if (params->flags & E_FSR)
 227                 flash->poll_cmd = CMD_FLAG_STATUS;
 228 #endif
 229
 230         /* Configure the BAR - discover bank cmds and read current bank */
 231 #ifdef CONFIG_SPI_FLASH_BAR
 232         u8 curr_bank = 0;
 233         if (flash->size > SPI_FLASH_16MB_BOUN) {
 234                 int ret;
 235
 236                 flash->bank_read_cmd = (idcode[0] == 0x01) ?
 237                                         CMD_BANKADDR_BRRD : CMD_EXTNADDR_RDEAR;
 238                 flash->bank_write_cmd = (idcode[0] == 0x01) ?
 239                                         CMD_BANKADDR_BRWR : CMD_EXTNADDR_WREAR;
 240
 241                 ret = spi_flash_read_common(flash, &flash->bank_read_cmd, 1,
 242                                             &curr_bank, 1);
 243                 if (ret) {
 244                         debug("SF: fail to read bank addr register\n");
 245                         return ret;
 246                 }
 247                 flash->bank_curr = curr_bank;
 248         } else {
 249                 flash->bank_curr = curr_bank;
 250         }
 251 #endif
 252
 253         /* Flash powers up read-only, so clear BP# bits */
 254 #if defined(CONFIG_SPI_FLASH_ATMEL) || \
 255         defined(CONFIG_SPI_FLASH_MACRONIX) || \
 256         defined(CONFIG_SPI_FLASH_SST)
 257                 spi_flash_cmd_write_status(flash, 0);
 258 #endif
 259
 260         return 0;
 261 }
 262
 263 #ifdef CONFIG_OF_CONTROL
 264 int spi_flash_decode_fdt(const void *blob, struct spi_flash *flash)
 265 {
 266         fdt_addr_t addr;
 267         fdt_size_t size;
 268         int node;
 269
 270         /* If there is no node, do nothing */
 271         node = fdtdec_next_compatible(blob, 0, COMPAT_GENERIC_SPI_FLASH);
 272         if (node < 0)
 273                 return 0;
 274
 275         addr = fdtdec_get_addr_size(blob, node, "memory-map", &size);
 276         if (addr == FDT_ADDR_T_NONE) {
 277                 debug("%s: Cannot decode address\n", __func__);
 278                 return 0;
 279         }
 280
 281         if (flash->size != size) {
 282                 debug("%s: Memory map must cover entire device\n", __func__);
 283                 return -1;
 284         }
 285         flash->memory_map = map_sysmem(addr, size);
 286
 287         return 0;
 288 }
 289 #endif /* CONFIG_OF_CONTROL */
 290
 291 /**
 292  * spi_flash_probe_slave() - Probe for a SPI flash device on a bus
 293  *
 294  * @spi: Bus to probe
 295  * @flashp: Pointer to place to put flash info, which may be NULL if the
 296  * space should be allocated
 297  */
 298 int spi_flash_probe_slave(struct spi_slave *spi, struct spi_flash *flash)
 299 {
 300         u8 idcode[5];
 301         int ret;
 302
 303         /* Setup spi_slave */
 304         if (!spi) {
 305                 printf("SF: Failed to set up slave\n");
 306                 return -ENODEV;
 307         }
 308
 309         /* Claim spi bus */
 310         ret = spi_claim_bus(spi);
 311         if (ret) {
 312                 debug("SF: Failed to claim SPI bus: %d\n", ret);
 313                 return ret;
 314         }
 315
 316         /* Read the ID codes */
 317         ret = spi_flash_cmd(spi, CMD_READ_ID, idcode, sizeof(idcode));
 318         if (ret) {
 319                 printf("SF: Failed to get idcodes\n");
 320                 goto err_read_id;
 321         }
 322
 323 #ifdef DEBUG
 324         printf("SF: Got idcodes\n");
 325         print_buffer(0, idcode, 1, sizeof(idcode), 0);
 326 #endif
 327
 328         if (spi_flash_validate_params(spi, idcode, flash)) {
 329                 ret = -EINVAL;
 330                 goto err_read_id;
 331         }
 332
 333         /* Set the quad enable bit - only for quad commands */
 334         if ((flash->read_cmd == CMD_READ_QUAD_OUTPUT_FAST) ||
 335             (flash->read_cmd == CMD_READ_QUAD_IO_FAST) ||
 336             (flash->write_cmd == CMD_QUAD_PAGE_PROGRAM)) {
 337                 if (spi_flash_set_qeb(flash, idcode[0])) {
 338                         debug("SF: Fail to set QEB for %02x\n", idcode[0]);
 339                         ret = -EINVAL;
 340                         goto err_read_id;
 341                 }
 342         }
 343
 344 #ifdef CONFIG_OF_CONTROL
 345         if (spi_flash_decode_fdt(gd->fdt_blob, flash)) {
 346                 debug("SF: FDT decode error\n");
 347                 ret = -EINVAL;
 348                 goto err_read_id;
 349         }
 350 #endif
 351 #ifndef CONFIG_SPL_BUILD
 352         printf("SF: Detected %s with page size ", flash->name);
 353         print_size(flash->page_size, ", erase size ");
 354         print_size(flash->erase_size, ", total ");
 355         print_size(flash->size, "");
 356         if (flash->memory_map)
 357                 printf(", mapped at %p", flash->memory_map);
 358         puts("\n");
 359 #endif
 360 #ifndef CONFIG_SPI_FLASH_BAR
 361         if (((flash->dual_flash == SF_SINGLE_FLASH) &&
 362              (flash->size > SPI_FLASH_16MB_BOUN)) ||
 363              ((flash->dual_flash > SF_SINGLE_FLASH) &&
 364              (flash->size > SPI_FLASH_16MB_BOUN << 1))) {
 365                 puts("SF: Warning - Only lower 16MiB accessible,");
 366                 puts(" Full access #define CONFIG_SPI_FLASH_BAR\n");
 367         }
 368 #endif
 369
 370         /* Release spi bus */
 371         spi_release_bus(spi);
 372
 373         return 0;
 374
 375 err_read_id:
 376         spi_release_bus(spi);
 377         return ret;
 378 }
 379
 380 #ifndef CONFIG_DM_SPI_FLASH
 381 struct spi_flash *spi_flash_probe_tail(struct spi_slave *bus)
 382 {
 383         struct spi_flash *flash;
 384
 385         /* Allocate space if needed (not used by sf-uclass */
 386         flash = calloc(1, sizeof(*flash));
 387         if (!flash) {
 388                 debug("SF: Failed to allocate spi_flash\n");
 389                 return NULL;
 390         }
 391
 392         if (spi_flash_probe_slave(bus, flash)) {
 393                 spi_free_slave(bus);
 394                 free(flash);
 395                 return NULL;
 396         }
 397
 398         return flash;
 399 }
 400
 401 struct spi_flash *spi_flash_probe(unsigned int busnum, unsigned int cs,
 402                 unsigned int max_hz, unsigned int spi_mode)
 403 {
 404         struct spi_slave *bus;
 405
 406         bus = spi_setup_slave(busnum, cs, max_hz, spi_mode);
 407         if (!bus)
 408                 return NULL;
 409         return spi_flash_probe_tail(bus);
 410 }
 411
 412 #ifdef CONFIG_OF_SPI_FLASH
 413 struct spi_flash *spi_flash_probe_fdt(const void *blob, int slave_node,
 414                                       int spi_node)
 415 {
 416         struct spi_slave *bus;
 417
 418         bus = spi_setup_slave_fdt(blob, slave_node, spi_node);
 419         if (!bus)
 420                 return NULL;
 421         return spi_flash_probe_tail(bus);
 422 }
 423 #endif
 424
 425 void spi_flash_free(struct spi_flash *flash)
 426 {
 427         spi_free_slave(flash->spi);
 428         free(flash);
 429 }
 430
 431 #else /* defined CONFIG_DM_SPI_FLASH */
 432
 433 static int spi_flash_std_read(struct udevice *dev, u32 offset, size_t len,
 434                               void *buf)
 435 {
 436         struct spi_flash *flash = dev_get_uclass_priv(dev);
 437
 438         return spi_flash_cmd_read_ops(flash, offset, len, buf);
 439 }
 440
 441 int spi_flash_std_write(struct udevice *dev, u32 offset, size_t len,
 442                         const void *buf)
 443 {
 444         struct spi_flash *flash = dev_get_uclass_priv(dev);
 445
 446         return spi_flash_cmd_write_ops(flash, offset, len, buf);
 447 }
 448
 449 int spi_flash_std_erase(struct udevice *dev, u32 offset, size_t len)
 450 {
 451         struct spi_flash *flash = dev_get_uclass_priv(dev);
 452
 453         return spi_flash_cmd_erase_ops(flash, offset, len);
 454 }
 455
 456 int spi_flash_std_probe(struct udevice *dev)
 457 {
 458         struct spi_slave *slave = dev_get_parentdata(dev);
 459         struct dm_spi_slave_platdata *plat = dev_get_parent_platdata(dev);
 460         struct spi_flash *flash;
 461
 462         flash = dev_get_uclass_priv(dev);
 463         flash->dev = dev;
 464         debug("%s: slave=%p, cs=%d\n", __func__, slave, plat->cs);
 465         return spi_flash_probe_slave(slave, flash);
 466 }
 467
 468 static const struct dm_spi_flash_ops spi_flash_std_ops = {
 469         .read = spi_flash_std_read,
 470         .write = spi_flash_std_write,
 471         .erase = spi_flash_std_erase,
 472 };
 473
 474 static const struct udevice_id spi_flash_std_ids[] = {
 475         { .compatible = "spi-flash" },
 476         { }
 477 };
 478
 479 U_BOOT_DRIVER(spi_flash_std) = {
 480         .name           = "spi_flash_std",
 481         .id             = UCLASS_SPI_FLASH,
 482         .of_match       = spi_flash_std_ids,
 483         .probe          = spi_flash_std_probe,
 484         .priv_auto_alloc_size = sizeof(struct spi_flash),
 485         .ops            = &spi_flash_std_ops,
 486 };
 487
 488 #endif /* CONFIG_DM_SPI_FLASH */