1 # SPDX-License-Identifier: GPL-2.0-only
3 # Broadcom device configuration
6 config NET_VENDOR_BROADCOM
7 bool "Broadcom devices"
9 depends on (SSB_POSSIBLE && HAS_DMA) || PCI || BCM63XX || \
12 If you have a network (Ethernet) chipset belonging to this class,
15 Note that the answer to this question does not directly affect
16 the kernel: saying N will just cause the configurator to skip all
17 the questions regarding Broadcom chipsets. If you say Y, you will
18 be asked for your specific chipset/driver in the following questions.
20 if NET_VENDOR_BROADCOM
23 tristate "Broadcom 440x/47xx ethernet support"
24 depends on SSB_POSSIBLE && HAS_DMA
29 If you have a network (Ethernet) controller of this type, say Y
32 To compile this driver as a module, choose M here. The module
35 # Auto-select SSB PCI-HOST support, if possible
36 config B44_PCI_AUTOSELECT
38 depends on B44 && SSB_PCIHOST_POSSIBLE
42 # Auto-select SSB PCICORE driver, if possible
43 config B44_PCICORE_AUTOSELECT
45 depends on B44 && SSB_DRIVER_PCICORE_POSSIBLE
46 select SSB_DRIVER_PCICORE
51 depends on B44_PCI_AUTOSELECT && B44_PCICORE_AUTOSELECT
55 tristate "Broadcom 63xx internal mac support"
60 This driver supports the ethernet MACs in the Broadcom 63xx
61 MIPS chipset family (BCM63XX).
64 tristate "Broadcom GENET internal MAC support"
70 select MDIO_BCM_UNIMAC
72 select BROADCOM_PHY if ARCH_BCM2835
74 This driver supports the built-in Ethernet MACs found in the
75 Broadcom BCM7xxx Set Top Box family chipset.
78 tristate "QLogic bnx2 support"
83 This driver supports QLogic bnx2 gigabit Ethernet cards.
85 To compile this driver as a module, choose M here: the module
86 will be called bnx2. This is recommended.
89 tristate "QLogic CNIC support"
90 depends on PCI && (IPV6 || IPV6=n)
94 This driver supports offload features of QLogic bnx2 gigabit
97 To compile this driver as a module, choose M here: the module
98 will be called cnic. This is recommended.
101 tristate "SB1250 Gigabit Ethernet support"
102 depends on SIBYTE_SB1xxx_SOC
105 This driver supports Gigabit Ethernet interfaces based on the
106 Broadcom SiByte family of System-On-a-Chip parts. They include
107 the BCM1120, BCM1125, BCM1125H, BCM1250, BCM1255, BCM1280, BCM1455
110 To compile this driver as a module, choose M here: the module
111 will be called sb1250-mac.
114 tristate "Broadcom Tigon3 support"
119 This driver supports Broadcom Tigon3 based gigabit Ethernet cards.
121 To compile this driver as a module, choose M here: the module
122 will be called tg3. This is recommended.
125 bool "Broadcom Tigon3 HWMON support"
127 depends on TIGON3 && HWMON && !(TIGON3=y && HWMON=m)
129 Say Y if you want to expose the thermal sensor on Tigon3 devices.
132 tristate "Broadcom NetXtremeII 10Gb support"
140 This driver supports Broadcom NetXtremeII 10 gigabit Ethernet cards.
141 To compile this driver as a module, choose M here: the module
142 will be called bnx2x. This is recommended.
145 bool "Broadcom 578xx and 57712 SR-IOV support"
146 depends on BNX2X && PCI_IOV
149 This configuration parameter enables Single Root Input Output
150 Virtualization support in the 578xx and 57712 products. This
151 allows for virtual function acceleration in virtual environments.
156 This enables the integrated ethernet controller support for many
157 Broadcom (mostly iProc) SoCs. An appropriate bus interface driver
158 needs to be enabled to select this.
161 tristate "Broadcom iProc GBit BCMA support"
162 depends on BCMA && BCMA_HOST_SOC
163 depends on BCM47XX || ARCH_BCM_5301X || COMPILE_TEST
168 This driver supports GBit MAC and BCM4706 GBit MAC cores on BCMA bus.
169 They can be found on BCM47xx SoCs and provide gigabit ethernet.
170 In case of using this driver on BCM4706 it's also requires to enable
171 BCMA_DRIVER_GMAC_CMN to make it work.
173 config BGMAC_PLATFORM
174 tristate "Broadcom iProc GBit platform support"
175 depends on ARCH_BCM_IPROC || COMPILE_TEST
180 default ARCH_BCM_IPROC
182 Say Y here if you want to use the Broadcom iProc Gigabit Ethernet
183 controller through the generic platform interface
186 tristate "Broadcom SYSTEMPORT internal MAC support"
188 depends on NET_DSA || !NET_DSA
194 This driver supports the built-in Ethernet MACs found in the
195 Broadcom BCM7xxx Set Top Box family chipset using an internal
199 tristate "Broadcom NetXtreme-C/E support"
207 This driver supports Broadcom NetXtreme-C/E 10/25/40/50 gigabit
208 Ethernet cards. To compile this driver as a module, choose M here:
209 the module will be called bnxt_en. This is recommended.
212 bool "Broadcom NetXtreme-C/E SR-IOV support"
213 depends on BNXT && PCI_IOV
216 This configuration parameter enables Single Root Input Output
217 Virtualization support in the NetXtreme-C/E products. This
218 allows for virtual function acceleration in virtual environments.
220 config BNXT_FLOWER_OFFLOAD
221 bool "TC Flower offload support for NetXtreme-C/E"
225 This configuration parameter enables TC Flower packet classifier
226 offload for eswitch. This option enables SR-IOV switchdev eswitch
230 bool "Data Center Bridging (DCB) Support"
232 depends on BNXT && DCB
234 Say Y here if you want to use Data Center Bridging (DCB) in the
240 bool "Broadcom NetXtreme-C/E HWMON support"
242 depends on BNXT && HWMON && !(BNXT=y && HWMON=m)
244 Say Y if you want to expose the thermal sensor data on NetXtreme-C/E
245 devices, via the hwmon sysfs interface.
247 endif # NET_VENDOR_BROADCOM