drivers/net/smc91111.h

   1 /*------------------------------------------------------------------------
   2  . smc91111.h - macros for the LAN91C111 Ethernet Driver
   3  .
   4  . (C) Copyright 2002
   5  . Sysgo Real-Time Solutions, GmbH <www.elinos.com>
   6  . Rolf Offermanns <rof@sysgo.de>
   7  . Copyright (C) 2001 Standard Microsystems Corporation (SMSC)
   8  .       Developed by Simple Network Magic Corporation (SNMC)
   9  . Copyright (C) 1996 by Erik Stahlman (ES)
  10  .
  11   * SPDX-License-Identifier:    GPL-2.0+
  12  .
  13  . This file contains register information and access macros for
  14  . the LAN91C111 single chip ethernet controller.  It is a modified
  15  . version of the smc9194.h file.
  16  .
  17  . Information contained in this file was obtained from the LAN91C111
  18  . manual from SMC.  To get a copy, if you really want one, you can find
  19  . information under www.smsc.com.
  20  .
  21  . Authors
  22  .      Erik Stahlman                           ( erik@vt.edu )
  23  .      Daris A Nevil                           ( dnevil@snmc.com )
  24  .
  25  . History
  26  . 03/16/01             Daris A Nevil   Modified for use with LAN91C111 device
  27  .
  28  ---------------------------------------------------------------------------*/
  29 #ifndef _SMC91111_H_
  30 #define _SMC91111_H_
  31
  32 #include <asm/types.h>
  33 #include <config.h>
  34
  35 /*
  36  * This function may be called by the board specific initialisation code
  37  * in order to override the default mac address.
  38  */
  39
  40 void smc_set_mac_addr (const unsigned char *addr);
  41
  42
  43 /* I want some simple types */
  44
  45 typedef unsigned char                   byte;
  46 typedef unsigned short                  word;
  47 typedef unsigned long int               dword;
  48
  49 struct smc91111_priv{
  50         u8 dev_num;
  51 };
  52
  53 /*
  54  . DEBUGGING LEVELS
  55  .
  56  . 0 for normal operation
  57  . 1 for slightly more details
  58  . >2 for various levels of increasingly useless information
  59  .    2 for interrupt tracking, status flags
  60  .    3 for packet info
  61  .    4 for complete packet dumps
  62 */
  63 /*#define SMC_DEBUG 0 */
  64
  65 /* Because of bank switching, the LAN91xxx uses only 16 I/O ports */
  66
  67 #define SMC_IO_EXTENT   16
  68
  69 #ifdef CONFIG_CPU_PXA25X
  70
  71 #ifdef CONFIG_XSENGINE
  72 #define SMC_inl(a,r)    (*((volatile dword *)((a)->iobase+((r)<<1))))
  73 #define SMC_inw(a,r)    (*((volatile word *)((a)->iobase+((r)<<1))))
  74 #define SMC_inb(a,p)  ({ \
  75         unsigned int __p = (unsigned int)((a)->iobase + ((p)<<1)); \
  76         unsigned int __v = *(volatile unsigned short *)((__p) & ~2); \
  77         if (__p & 2) __v >>= 8; \
  78         else __v &= 0xff; \
  79         __v; })
  80 #elif defined(CONFIG_XAENIAX)
  81 #define SMC_inl(a,r)    (*((volatile dword *)((a)->iobase+(r))))
  82 #define SMC_inw(a,z)    ({ \
  83         unsigned int __p = (unsigned int)((a)->iobase + (z)); \
  84         unsigned int __v = *(volatile unsigned int *)((__p) & ~3); \
  85         if (__p & 3) __v >>= 16; \
  86         else __v &= 0xffff; \
  87         __v; })
  88 #define SMC_inb(a,p)    ({ \
  89         unsigned int ___v = SMC_inw((a),(p) & ~1); \
  90         if ((p) & 1) ___v >>= 8; \
  91         else ___v &= 0xff; \
  92         ___v; })
  93 #else
  94 #define SMC_inl(a,r)    (*((volatile dword *)((a)->iobase+(r))))
  95 #define SMC_inw(a,r)    (*((volatile word *)((a)->iobase+(r))))
  96 #define SMC_inb(a,p)    ({ \
  97         unsigned int __p = (unsigned int)((a)->iobase + (p)); \
  98         unsigned int __v = *(volatile unsigned short *)((__p) & ~1); \
  99         if (__p & 1) __v >>= 8; \
 100         else __v &= 0xff; \
 101         __v; })
 102 #endif
 103
 104 #ifdef CONFIG_XSENGINE
 105 #define SMC_outl(a,d,r) (*((volatile dword *)((a)->iobase+(r<<1))) = d)
 106 #define SMC_outw(a,d,r) (*((volatile word *)((a)->iobase+(r<<1))) = d)
 107 #elif defined (CONFIG_XAENIAX)
 108 #define SMC_outl(a,d,r) (*((volatile dword *)((a)->iobase+(r))) = d)
 109 #define SMC_outw(a,d,p) ({ \
 110         dword __dwo = SMC_inl((a),(p) & ~3); \
 111         dword __dwn = (word)(d); \
 112         __dwo &= ((p) & 3) ? 0x0000ffff : 0xffff0000; \
 113         __dwo |= ((p) & 3) ? __dwn << 16 : __dwn; \
 114         SMC_outl((a), __dwo, (p) & ~3); \
 115 })
 116 #else
 117 #define SMC_outl(a,d,r) (*((volatile dword *)((a)->iobase+(r))) = d)
 118 #define SMC_outw(a,d,r) (*((volatile word *)((a)->iobase+(r))) = d)
 119 #endif
 120
 121 #define SMC_outb(a,d,r) ({      word __d = (byte)(d);  \
 122                                 word __w = SMC_inw((a),(r)&~1);  \
 123                                 __w &= ((r)&1) ? 0x00FF : 0xFF00;  \
 124                                 __w |= ((r)&1) ? __d<<8 : __d;  \
 125                                 SMC_outw((a),__w,(r)&~1);  \
 126                         })
 127
 128 #define SMC_outsl(a,r,b,l)      ({      int __i; \
 129                                         dword *__b2; \
 130                                         __b2 = (dword *) b; \
 131                                         for (__i = 0; __i < l; __i++) { \
 132                                             SMC_outl((a), *(__b2 + __i), r); \
 133                                         } \
 134                                 })
 135
 136 #define SMC_outsw(a,r,b,l)      ({      int __i; \
 137                                         word *__b2; \
 138                                         __b2 = (word *) b; \
 139                                         for (__i = 0; __i < l; __i++) { \
 140                                             SMC_outw((a), *(__b2 + __i), r); \
 141                                         } \
 142                                 })
 143
 144 #define SMC_insl(a,r,b,l)       ({      int __i ;  \
 145                                         dword *__b2;  \
 146                                         __b2 = (dword *) b;  \
 147                                         for (__i = 0; __i < l; __i++) {  \
 148                                           *(__b2 + __i) = SMC_inl((a),(r));  \
 149                                           SMC_inl((a),0);  \
 150                                         };  \
 151                                 })
 152
 153 #define SMC_insw(a,r,b,l)               ({      int __i ;  \
 154                                         word *__b2;  \
 155                                         __b2 = (word *) b;  \
 156                                         for (__i = 0; __i < l; __i++) {  \
 157                                           *(__b2 + __i) = SMC_inw((a),(r));  \
 158                                           SMC_inw((a),0);  \
 159                                         };  \
 160                                 })
 161
 162 #define SMC_insb(a,r,b,l)       ({      int __i ;  \
 163                                         byte *__b2;  \
 164                                         __b2 = (byte *) b;  \
 165                                         for (__i = 0; __i < l; __i++) {  \
 166                                           *(__b2 + __i) = SMC_inb((a),(r));  \
 167                                           SMC_inb((a),0);  \
 168                                         };  \
 169                                 })
 170
 171 #elif defined(CONFIG_LEON)      /* if not CONFIG_CPU_PXA25X */
 172
 173 #define SMC_LEON_SWAP16(_x_) ({ word _x = (_x_); ((_x << 8) | (_x >> 8)); })
 174
 175 #define SMC_LEON_SWAP32(_x_)                    \
 176     ({ dword _x = (_x_);                        \
 177        ((_x << 24) |                            \
 178        ((0x0000FF00UL & _x) <<  8) |            \
 179        ((0x00FF0000UL & _x) >>  8) |            \
 180        (_x  >> 24)); })
 181
 182 #define SMC_inl(a,r)    (SMC_LEON_SWAP32((*(volatile dword *)((a)->iobase+((r)<<0)))))
 183 #define SMC_inl_nosw(a,r)       ((*(volatile dword *)((a)->iobase+((r)<<0))))
 184 #define SMC_inw(a,r)    (SMC_LEON_SWAP16((*(volatile word *)((a)->iobase+((r)<<0)))))
 185 #define SMC_inw_nosw(a,r)       ((*(volatile word *)((a)->iobase+((r)<<0))))
 186 #define SMC_inb(a,p)    ({ \
 187         word ___v = SMC_inw((a),(p) & ~1); \
 188         if ((p) & 1) ___v >>= 8; \
 189         else ___v &= 0xff; \
 190         ___v; })
 191
 192 #define SMC_outl(a,d,r) (*(volatile dword *)((a)->iobase+((r)<<0))=SMC_LEON_SWAP32(d))
 193 #define SMC_outl_nosw(a,d,r)    (*(volatile dword *)((a)->iobase+((r)<<0))=(d))
 194 #define SMC_outw(a,d,r) (*(volatile word *)((a)->iobase+((r)<<0))=SMC_LEON_SWAP16(d))
 195 #define SMC_outw_nosw(a,d,r)    (*(volatile word *)((a)->iobase+((r)<<0))=(d))
 196 #define SMC_outb(a,d,r) do{     word __d = (byte)(d);  \
 197                                 word __w = SMC_inw((a),(r)&~1);  \
 198                                 __w &= ((r)&1) ? 0x00FF : 0xFF00;  \
 199                                 __w |= ((r)&1) ? __d<<8 : __d;  \
 200                                 SMC_outw((a),__w,(r)&~1);  \
 201                         }while(0)
 202 #define SMC_outsl(a,r,b,l)      do{     int __i; \
 203                                         dword *__b2; \
 204                                         __b2 = (dword *) b; \
 205                                         for (__i = 0; __i < l; __i++) { \
 206                                             SMC_outl_nosw((a), *(__b2 + __i), r); \
 207                                         } \
 208                                 }while(0)
 209 #define SMC_outsw(a,r,b,l)      do{     int __i; \
 210                                         word *__b2; \
 211                                         __b2 = (word *) b; \
 212                                         for (__i = 0; __i < l; __i++) { \
 213                                             SMC_outw_nosw((a), *(__b2 + __i), r); \
 214                                         } \
 215                                 }while(0)
 216 #define SMC_insl(a,r,b,l)       do{     int __i ;  \
 217                                         dword *__b2;  \
 218                                         __b2 = (dword *) b;  \
 219                                         for (__i = 0; __i < l; __i++) {  \
 220                                           *(__b2 + __i) = SMC_inl_nosw((a),(r));  \
 221                                         };  \
 222                                 }while(0)
 223
 224 #define SMC_insw(a,r,b,l)               do{     int __i ;  \
 225                                         word *__b2;  \
 226                                         __b2 = (word *) b;  \
 227                                         for (__i = 0; __i < l; __i++) {  \
 228                                           *(__b2 + __i) = SMC_inw_nosw((a),(r));  \
 229                                         };  \
 230                                 }while(0)
 231
 232 #define SMC_insb(a,r,b,l)               do{     int __i ;  \
 233                                         byte *__b2;  \
 234                                         __b2 = (byte *) b;  \
 235                                         for (__i = 0; __i < l; __i++) {  \
 236                                           *(__b2 + __i) = SMC_inb((a),(r));  \
 237                                         };  \
 238                                 }while(0)
 239 #elif defined(CONFIG_MS7206SE)
 240 #define SWAB7206(x) ({ word __x = x; ((__x << 8)|(__x >> 8)); })
 241 #define SMC_inw(a, r) *((volatile word*)((a)->iobase + (r)))
 242 #define SMC_inb(a, r) (*((volatile byte*)((a)->iobase + ((r) ^ 0x01))))
 243 #define SMC_insw(a, r, b, l) \
 244         do { \
 245                 int __i; \
 246                 word *__b2 = (word *)(b);                 \
 247                 for (__i = 0; __i < (l); __i++) { \
 248                         *__b2++ = SWAB7206(SMC_inw(a, r));      \
 249                 } \
 250         } while (0)
 251 #define SMC_outw(a, d, r)       (*((volatile word *)((a)->iobase+(r))) = d)
 252 #define SMC_outb(a, d, r)       ({      word __d = (byte)(d);  \
 253                                 word __w = SMC_inw((a), ((r)&(~1)));    \
 254                                 if (((r) & 1)) \
 255                                         __w = (__w & 0x00ff) | (__d << 8); \
 256                                 else \
 257                                         __w = (__w & 0xff00) | (__d); \
 258                                 SMC_outw((a), __w, ((r)&(~1)));       \
 259                         })
 260 #define SMC_outsw(a, r, b, l) \
 261         do { \
 262                 int __i; \
 263                 word *__b2 = (word *)(b);                 \
 264                 for (__i = 0; __i < (l); __i++) { \
 265                         SMC_outw(a, SWAB7206(*__b2), r);          \
 266                         __b2++; \
 267                 } \
 268         } while (0)
 269 #else                   /* if not CONFIG_CPU_PXA25X and not CONFIG_LEON */
 270
 271 #ifndef CONFIG_SMC_USE_IOFUNCS /* these macros don't work on some boards */
 272 /*
 273  * We have only 16 Bit PCMCIA access on Socket 0
 274  */
 275
 276 #ifdef CONFIG_ADNPESC1
 277 #define SMC_inw(a,r)    (*((volatile word *)((a)->iobase+((r)<<1))))
 278 #elif CONFIG_BLACKFIN
 279 #define SMC_inw(a,r)    ({ word __v = (*((volatile word *)((a)->iobase+(r)))); SSYNC(); __v;})
 280 #elif CONFIG_ARM64
 281 #define SMC_inw(a, r)   (*((volatile word*)((a)->iobase+((dword)(r)))))
 282 #else
 283 #define SMC_inw(a, r)   (*((volatile word*)((a)->iobase+(r))))
 284 #endif
 285 #define  SMC_inb(a,r)   (((r)&1) ? SMC_inw((a),(r)&~1)>>8 : SMC_inw((a),(r)&0xFF))
 286
 287 #ifdef CONFIG_ADNPESC1
 288 #define SMC_outw(a,d,r) (*((volatile word *)((a)->iobase+((r)<<1))) = d)
 289 #elif CONFIG_BLACKFIN
 290 #define SMC_outw(a, d, r)       \
 291                         ({      (*((volatile word*)((a)->iobase+((r)))) = d); \
 292                                 SSYNC(); \
 293                         })
 294 #elif CONFIG_ARM64
 295 #define SMC_outw(a, d, r)       \
 296                         (*((volatile word*)((a)->iobase+((dword)(r)))) = d)
 297 #else
 298 #define SMC_outw(a, d, r)       \
 299                         (*((volatile word*)((a)->iobase+(r))) = d)
 300 #endif
 301 #define SMC_outb(a,d,r) ({      word __d = (byte)(d);  \
 302                                 word __w = SMC_inw((a),(r)&~1);  \
 303                                 __w &= ((r)&1) ? 0x00FF : 0xFF00;  \
 304                                 __w |= ((r)&1) ? __d<<8 : __d;  \
 305                                 SMC_outw((a),__w,(r)&~1);  \
 306                         })
 307 #if 0
 308 #define SMC_outsw(a,r,b,l)      outsw((a)->iobase+(r), (b), (l))
 309 #else
 310 #define SMC_outsw(a,r,b,l)      ({      int __i; \
 311                                         word *__b2; \
 312                                         __b2 = (word *) b; \
 313                                         for (__i = 0; __i < l; __i++) { \
 314                                             SMC_outw((a), *(__b2 + __i), r); \
 315                                         } \
 316                                 })
 317 #endif
 318
 319 #if 0
 320 #define SMC_insw(a,r,b,l)       insw((a)->iobase+(r), (b), (l))
 321 #else
 322 #define SMC_insw(a,r,b,l)       ({      int __i ;  \
 323                                         word *__b2;  \
 324                                         __b2 = (word *) b;  \
 325                                         for (__i = 0; __i < l; __i++) {  \
 326                                           *(__b2 + __i) = SMC_inw((a),(r));  \
 327                                           SMC_inw((a),0);  \
 328                                         };  \
 329                                 })
 330 #endif
 331
 332 #endif  /* CONFIG_SMC_USE_IOFUNCS */
 333
 334 #if defined(CONFIG_SMC_USE_32_BIT)
 335
 336 #ifdef CONFIG_XSENGINE
 337 #define SMC_inl(a,r)    (*((volatile dword *)((a)->iobase+(r<<1))))
 338 #else
 339 #define SMC_inl(a,r)    (*((volatile dword *)((a)->iobase+(r))))
 340 #endif
 341
 342 #define SMC_insl(a,r,b,l)       ({      int __i ;  \
 343                                         dword *__b2;  \
 344                                         __b2 = (dword *) b;  \
 345                                         for (__i = 0; __i < l; __i++) {  \
 346                                           *(__b2 + __i) = SMC_inl((a),(r));  \
 347                                           SMC_inl((a),0);  \
 348                                         };  \
 349                                 })
 350
 351 #ifdef CONFIG_XSENGINE
 352 #define SMC_outl(a,d,r) (*((volatile dword *)((a)->iobase+(r<<1))) = d)
 353 #else
 354 #define SMC_outl(a,d,r) (*((volatile dword *)((a)->iobase+(r))) = d)
 355 #endif
 356 #define SMC_outsl(a,r,b,l)      ({      int __i; \
 357                                         dword *__b2; \
 358                                         __b2 = (dword *) b; \
 359                                         for (__i = 0; __i < l; __i++) { \
 360                                             SMC_outl((a), *(__b2 + __i), r); \
 361                                         } \
 362                                 })
 363
 364 #endif /* CONFIG_SMC_USE_32_BIT */
 365
 366 #endif
 367
 368 /*---------------------------------------------------------------
 369  .
 370  . A description of the SMSC registers is probably in order here,
 371  . although for details, the SMC datasheet is invaluable.
 372  .
 373  . Basically, the chip has 4 banks of registers ( 0 to 3 ), which
 374  . are accessed by writing a number into the BANK_SELECT register
 375  . ( I also use a SMC_SELECT_BANK macro for this ).
 376  .
 377  . The banks are configured so that for most purposes, bank 2 is all
 378  . that is needed for simple run time tasks.
 379  -----------------------------------------------------------------------*/
 380
 381 /*
 382  . Bank Select Register:
 383  .
 384  .              yyyy yyyy 0000 00xx
 385  .              xx              = bank number
 386  .              yyyy yyyy       = 0x33, for identification purposes.
 387 */
 388 #define BANK_SELECT             14
 389
 390 /* Transmit Control Register */
 391 /* BANK 0  */
 392 #define TCR_REG         0x0000  /* transmit control register */
 393 #define TCR_ENABLE      0x0001  /* When 1 we can transmit */
 394 #define TCR_LOOP        0x0002  /* Controls output pin LBK */
 395 #define TCR_FORCOL      0x0004  /* When 1 will force a collision */
 396 #define TCR_PAD_EN      0x0080  /* When 1 will pad tx frames < 64 bytes w/0 */
 397 #define TCR_NOCRC       0x0100  /* When 1 will not append CRC to tx frames */
 398 #define TCR_MON_CSN     0x0400  /* When 1 tx monitors carrier */
 399 #define TCR_FDUPLX      0x0800  /* When 1 enables full duplex operation */
 400 #define TCR_STP_SQET    0x1000  /* When 1 stops tx if Signal Quality Error */
 401 #define TCR_EPH_LOOP    0x2000  /* When 1 enables EPH block loopback */
 402 #define TCR_SWFDUP      0x8000  /* When 1 enables Switched Full Duplex mode */
 403
 404 #define TCR_CLEAR       0       /* do NOTHING */
 405 /* the default settings for the TCR register : */
 406 /* QUESTION: do I want to enable padding of short packets ? */
 407 #define TCR_DEFAULT     TCR_ENABLE
 408
 409
 410 /* EPH Status Register */
 411 /* BANK 0  */
 412 #define EPH_STATUS_REG  0x0002
 413 #define ES_TX_SUC       0x0001  /* Last TX was successful */
 414 #define ES_SNGL_COL     0x0002  /* Single collision detected for last tx */
 415 #define ES_MUL_COL      0x0004  /* Multiple collisions detected for last tx */
 416 #define ES_LTX_MULT     0x0008  /* Last tx was a multicast */
 417 #define ES_16COL        0x0010  /* 16 Collisions Reached */
 418 #define ES_SQET         0x0020  /* Signal Quality Error Test */
 419 #define ES_LTXBRD       0x0040  /* Last tx was a broadcast */
 420 #define ES_TXDEFR       0x0080  /* Transmit Deferred */
 421 #define ES_LATCOL       0x0200  /* Late collision detected on last tx */
 422 #define ES_LOSTCARR     0x0400  /* Lost Carrier Sense */
 423 #define ES_EXC_DEF      0x0800  /* Excessive Deferral */
 424 #define ES_CTR_ROL      0x1000  /* Counter Roll Over indication */
 425 #define ES_LINK_OK      0x4000  /* Driven by inverted value of nLNK pin */
 426 #define ES_TXUNRN       0x8000  /* Tx Underrun */
 427
 428
 429 /* Receive Control Register */
 430 /* BANK 0  */
 431 #define RCR_REG         0x0004
 432 #define RCR_RX_ABORT    0x0001  /* Set if a rx frame was aborted */
 433 #define RCR_PRMS        0x0002  /* Enable promiscuous mode */
 434 #define RCR_ALMUL       0x0004  /* When set accepts all multicast frames */
 435 #define RCR_RXEN        0x0100  /* IFF this is set, we can receive packets */
 436 #define RCR_STRIP_CRC   0x0200  /* When set strips CRC from rx packets */
 437 #define RCR_ABORT_ENB   0x0200  /* When set will abort rx on collision */
 438 #define RCR_FILT_CAR    0x0400  /* When set filters leading 12 bit s of carrier */
 439 #define RCR_SOFTRST     0x8000  /* resets the chip */
 440
 441 /* the normal settings for the RCR register : */
 442 #define RCR_DEFAULT     (RCR_STRIP_CRC | RCR_RXEN)
 443 #define RCR_CLEAR       0x0     /* set it to a base state */
 444
 445 /* Counter Register */
 446 /* BANK 0  */
 447 #define COUNTER_REG     0x0006
 448
 449 /* Memory Information Register */
 450 /* BANK 0  */
 451 #define MIR_REG         0x0008
 452
 453 /* Receive/Phy Control Register */
 454 /* BANK 0  */
 455 #define RPC_REG         0x000A
 456 #define RPC_SPEED       0x2000  /* When 1 PHY is in 100Mbps mode. */
 457 #define RPC_DPLX        0x1000  /* When 1 PHY is in Full-Duplex Mode */
 458 #define RPC_ANEG        0x0800  /* When 1 PHY is in Auto-Negotiate Mode */
 459 #define RPC_LSXA_SHFT   5       /* Bits to shift LS2A,LS1A,LS0A to lsb */
 460 #define RPC_LSXB_SHFT   2       /* Bits to get LS2B,LS1B,LS0B to lsb */
 461 #define RPC_LED_100_10  (0x00)  /* LED = 100Mbps OR's with 10Mbps link detect */
 462 #define RPC_LED_RES     (0x01)  /* LED = Reserved */
 463 #define RPC_LED_10      (0x02)  /* LED = 10Mbps link detect */
 464 #define RPC_LED_FD      (0x03)  /* LED = Full Duplex Mode */
 465 #define RPC_LED_TX_RX   (0x04)  /* LED = TX or RX packet occurred */
 466 #define RPC_LED_100     (0x05)  /* LED = 100Mbps link dectect */
 467 #define RPC_LED_TX      (0x06)  /* LED = TX packet occurred */
 468 #define RPC_LED_RX      (0x07)  /* LED = RX packet occurred */
 469 #if defined(CONFIG_DK1C20) || defined(CONFIG_DK1S10)
 470 /* buggy schematic: LEDa -> yellow, LEDb --> green */
 471 #define RPC_DEFAULT     ( RPC_SPEED | RPC_DPLX | RPC_ANEG       \
 472                         | (RPC_LED_TX_RX << RPC_LSXA_SHFT)      \
 473                         | (RPC_LED_100_10 << RPC_LSXB_SHFT)     )
 474 #elif defined(CONFIG_ADNPESC1)
 475 /* SSV ADNP/ESC1 has only one LED: LEDa -> Rx/Tx indicator */
 476 #define RPC_DEFAULT     ( RPC_SPEED | RPC_DPLX | RPC_ANEG       \
 477                         | (RPC_LED_TX_RX << RPC_LSXA_SHFT)      \
 478                         | (RPC_LED_100_10 << RPC_LSXB_SHFT)     )
 479 #else
 480 /* SMSC reference design: LEDa --> green, LEDb --> yellow */
 481 #define RPC_DEFAULT     ( RPC_SPEED | RPC_DPLX | RPC_ANEG       \
 482                         | (RPC_LED_100_10 << RPC_LSXA_SHFT)     \
 483                         | (RPC_LED_TX_RX << RPC_LSXB_SHFT)      )
 484 #endif
 485
 486 /* Bank 0 0x000C is reserved */
 487
 488 /* Bank Select Register */
 489 /* All Banks */
 490 #define BSR_REG 0x000E
 491
 492
 493 /* Configuration Reg */
 494 /* BANK 1 */
 495 #define CONFIG_REG      0x0000
 496 #define CONFIG_EXT_PHY  0x0200  /* 1=external MII, 0=internal Phy */
 497 #define CONFIG_GPCNTRL  0x0400  /* Inverse value drives pin nCNTRL */
 498 #define CONFIG_NO_WAIT  0x1000  /* When 1 no extra wait states on ISA bus */
 499 #define CONFIG_EPH_POWER_EN 0x8000 /* When 0 EPH is placed into low power mode. */
 500
 501 /* Default is powered-up, Internal Phy, Wait States, and pin nCNTRL=low */
 502 #define CONFIG_DEFAULT  (CONFIG_EPH_POWER_EN)
 503
 504
 505 /* Base Address Register */
 506 /* BANK 1 */
 507 #define BASE_REG        0x0002
 508
 509
 510 /* Individual Address Registers */
 511 /* BANK 1 */
 512 #define ADDR0_REG       0x0004
 513 #define ADDR1_REG       0x0006
 514 #define ADDR2_REG       0x0008
 515
 516
 517 /* General Purpose Register */
 518 /* BANK 1 */
 519 #define GP_REG          0x000A
 520
 521
 522 /* Control Register */
 523 /* BANK 1 */
 524 #define CTL_REG         0x000C
 525 #define CTL_RCV_BAD     0x4000 /* When 1 bad CRC packets are received */
 526 #define CTL_AUTO_RELEASE 0x0800 /* When 1 tx pages are released automatically */
 527 #define CTL_LE_ENABLE   0x0080 /* When 1 enables Link Error interrupt */
 528 #define CTL_CR_ENABLE   0x0040 /* When 1 enables Counter Rollover interrupt */
 529 #define CTL_TE_ENABLE   0x0020 /* When 1 enables Transmit Error interrupt */
 530 #define CTL_EEPROM_SELECT 0x0004 /* Controls EEPROM reload & store */
 531 #define CTL_RELOAD      0x0002 /* When set reads EEPROM into registers */
 532 #define CTL_STORE       0x0001 /* When set stores registers into EEPROM */
 533 #define CTL_DEFAULT     (0x1A10) /* Autorelease enabled*/
 534
 535 /* MMU Command Register */
 536 /* BANK 2 */
 537 #define MMU_CMD_REG     0x0000
 538 #define MC_BUSY         1       /* When 1 the last release has not completed */
 539 #define MC_NOP          (0<<5)  /* No Op */
 540 #define MC_ALLOC        (1<<5)  /* OR with number of 256 byte packets */
 541 #define MC_RESET        (2<<5)  /* Reset MMU to initial state */
 542 #define MC_REMOVE       (3<<5)  /* Remove the current rx packet */
 543 #define MC_RELEASE      (4<<5)  /* Remove and release the current rx packet */
 544 #define MC_FREEPKT      (5<<5)  /* Release packet in PNR register */
 545 #define MC_ENQUEUE      (6<<5)  /* Enqueue the packet for transmit */
 546 #define MC_RSTTXFIFO    (7<<5)  /* Reset the TX FIFOs */
 547
 548
 549 /* Packet Number Register */
 550 /* BANK 2 */
 551 #define PN_REG          0x0002
 552
 553
 554 /* Allocation Result Register */
 555 /* BANK 2 */
 556 #define AR_REG          0x0003
 557 #define AR_FAILED       0x80    /* Alocation Failed */
 558
 559
 560 /* RX FIFO Ports Register */
 561 /* BANK 2 */
 562 #define RXFIFO_REG      0x0004  /* Must be read as a word */
 563 #define RXFIFO_REMPTY   0x8000  /* RX FIFO Empty */
 564
 565
 566 /* TX FIFO Ports Register */
 567 /* BANK 2 */
 568 #define TXFIFO_REG      RXFIFO_REG      /* Must be read as a word */
 569 #define TXFIFO_TEMPTY   0x80    /* TX FIFO Empty */
 570
 571
 572 /* Pointer Register */
 573 /* BANK 2 */
 574 #define PTR_REG         0x0006
 575 #define PTR_RCV         0x8000 /* 1=Receive area, 0=Transmit area */
 576 #define PTR_AUTOINC     0x4000 /* Auto increment the pointer on each access */
 577 #define PTR_READ        0x2000 /* When 1 the operation is a read */
 578 #define PTR_NOTEMPTY    0x0800 /* When 1 _do not_ write fifo DATA REG */
 579
 580
 581 /* Data Register */
 582 /* BANK 2 */
 583 #define SMC91111_DATA_REG       0x0008
 584
 585
 586 /* Interrupt Status/Acknowledge Register */
 587 /* BANK 2 */
 588 #define SMC91111_INT_REG        0x000C
 589
 590
 591 /* Interrupt Mask Register */
 592 /* BANK 2 */
 593 #define IM_REG          0x000D
 594 #define IM_MDINT        0x80 /* PHY MI Register 18 Interrupt */
 595 #define IM_ERCV_INT     0x40 /* Early Receive Interrupt */
 596 #define IM_EPH_INT      0x20 /* Set by Etheret Protocol Handler section */
 597 #define IM_RX_OVRN_INT  0x10 /* Set by Receiver Overruns */
 598 #define IM_ALLOC_INT    0x08 /* Set when allocation request is completed */
 599 #define IM_TX_EMPTY_INT 0x04 /* Set if the TX FIFO goes empty */
 600 #define IM_TX_INT       0x02 /* Transmit Interrrupt */
 601 #define IM_RCV_INT      0x01 /* Receive Interrupt */
 602
 603
 604 /* Multicast Table Registers */
 605 /* BANK 3 */
 606 #define MCAST_REG1      0x0000
 607 #define MCAST_REG2      0x0002
 608 #define MCAST_REG3      0x0004
 609 #define MCAST_REG4      0x0006
 610
 611
 612 /* Management Interface Register (MII) */
 613 /* BANK 3 */
 614 #define MII_REG         0x0008
 615 #define MII_MSK_CRS100  0x4000 /* Disables CRS100 detection during tx half dup */
 616 #define MII_MDOE        0x0008 /* MII Output Enable */
 617 #define MII_MCLK        0x0004 /* MII Clock, pin MDCLK */
 618 #define MII_MDI         0x0002 /* MII Input, pin MDI */
 619 #define MII_MDO         0x0001 /* MII Output, pin MDO */
 620
 621
 622 /* Revision Register */
 623 /* BANK 3 */
 624 #define REV_REG         0x000A /* ( hi: chip id   low: rev # ) */
 625
 626
 627 /* Early RCV Register */
 628 /* BANK 3 */
 629 /* this is NOT on SMC9192 */
 630 #define ERCV_REG        0x000C
 631 #define ERCV_RCV_DISCRD 0x0080 /* When 1 discards a packet being received */
 632 #define ERCV_THRESHOLD  0x001F /* ERCV Threshold Mask */
 633
 634 /* External Register */
 635 /* BANK 7 */
 636 #define EXT_REG         0x0000
 637
 638
 639 #define CHIP_9192       3
 640 #define CHIP_9194       4
 641 #define CHIP_9195       5
 642 #define CHIP_9196       6
 643 #define CHIP_91100      7
 644 #define CHIP_91100FD    8
 645 #define CHIP_91111FD    9
 646
 647 #if 0
 648 static const char * chip_ids[ 15 ] =  {
 649         NULL, NULL, NULL,
 650         /* 3 */ "SMC91C90/91C92",
 651         /* 4 */ "SMC91C94",
 652         /* 5 */ "SMC91C95",
 653         /* 6 */ "SMC91C96",
 654         /* 7 */ "SMC91C100",
 655         /* 8 */ "SMC91C100FD",
 656         /* 9 */ "SMC91C111",
 657         NULL, NULL,
 658         NULL, NULL, NULL};
 659 #endif
 660
 661 /*
 662  . Transmit status bits
 663 */
 664 #define TS_SUCCESS 0x0001
 665 #define TS_LOSTCAR 0x0400
 666 #define TS_LATCOL  0x0200
 667 #define TS_16COL   0x0010
 668
 669 /*
 670  . Receive status bits
 671 */
 672 #define RS_ALGNERR      0x8000
 673 #define RS_BRODCAST     0x4000
 674 #define RS_BADCRC       0x2000
 675 #define RS_ODDFRAME     0x1000  /* bug: the LAN91C111 never sets this on receive */
 676 #define RS_TOOLONG      0x0800
 677 #define RS_TOOSHORT     0x0400
 678 #define RS_MULTICAST    0x0001
 679 #define RS_ERRORS       (RS_ALGNERR | RS_BADCRC | RS_TOOLONG | RS_TOOSHORT)
 680
 681
 682 /* PHY Types */
 683 enum {
 684         PHY_LAN83C183 = 1,      /* LAN91C111 Internal PHY */
 685         PHY_LAN83C180
 686 };
 687
 688
 689 /* PHY Register Addresses (LAN91C111 Internal PHY) */
 690
 691 /* PHY Control Register */
 692 #define PHY_CNTL_REG            0x00
 693 #define PHY_CNTL_RST            0x8000  /* 1=PHY Reset */
 694 #define PHY_CNTL_LPBK           0x4000  /* 1=PHY Loopback */
 695 #define PHY_CNTL_SPEED          0x2000  /* 1=100Mbps, 0=10Mpbs */
 696 #define PHY_CNTL_ANEG_EN        0x1000 /* 1=Enable Auto negotiation */
 697 #define PHY_CNTL_PDN            0x0800  /* 1=PHY Power Down mode */
 698 #define PHY_CNTL_MII_DIS        0x0400  /* 1=MII 4 bit interface disabled */
 699 #define PHY_CNTL_ANEG_RST       0x0200 /* 1=Reset Auto negotiate */
 700 #define PHY_CNTL_DPLX           0x0100  /* 1=Full Duplex, 0=Half Duplex */
 701 #define PHY_CNTL_COLTST         0x0080  /* 1= MII Colision Test */
 702
 703 /* PHY Status Register */
 704 #define PHY_STAT_REG            0x01
 705 #define PHY_STAT_CAP_T4         0x8000  /* 1=100Base-T4 capable */
 706 #define PHY_STAT_CAP_TXF        0x4000  /* 1=100Base-X full duplex capable */
 707 #define PHY_STAT_CAP_TXH        0x2000  /* 1=100Base-X half duplex capable */
 708 #define PHY_STAT_CAP_TF         0x1000  /* 1=10Mbps full duplex capable */
 709 #define PHY_STAT_CAP_TH         0x0800  /* 1=10Mbps half duplex capable */
 710 #define PHY_STAT_CAP_SUPR       0x0040  /* 1=recv mgmt frames with not preamble */
 711 #define PHY_STAT_ANEG_ACK       0x0020  /* 1=ANEG has completed */
 712 #define PHY_STAT_REM_FLT        0x0010  /* 1=Remote Fault detected */
 713 #define PHY_STAT_CAP_ANEG       0x0008  /* 1=Auto negotiate capable */
 714 #define PHY_STAT_LINK           0x0004  /* 1=valid link */
 715 #define PHY_STAT_JAB            0x0002  /* 1=10Mbps jabber condition */
 716 #define PHY_STAT_EXREG          0x0001  /* 1=extended registers implemented */
 717
 718 /* PHY Identifier Registers */
 719 #define PHY_ID1_REG             0x02    /* PHY Identifier 1 */
 720 #define PHY_ID2_REG             0x03    /* PHY Identifier 2 */
 721
 722 /* PHY Auto-Negotiation Advertisement Register */
 723 #define PHY_AD_REG              0x04
 724 #define PHY_AD_NP               0x8000  /* 1=PHY requests exchange of Next Page */
 725 #define PHY_AD_ACK              0x4000  /* 1=got link code word from remote */
 726 #define PHY_AD_RF               0x2000  /* 1=advertise remote fault */
 727 #define PHY_AD_T4               0x0200  /* 1=PHY is capable of 100Base-T4 */
 728 #define PHY_AD_TX_FDX           0x0100  /* 1=PHY is capable of 100Base-TX FDPLX */
 729 #define PHY_AD_TX_HDX           0x0080  /* 1=PHY is capable of 100Base-TX HDPLX */
 730 #define PHY_AD_10_FDX           0x0040  /* 1=PHY is capable of 10Base-T FDPLX */
 731 #define PHY_AD_10_HDX           0x0020  /* 1=PHY is capable of 10Base-T HDPLX */
 732 #define PHY_AD_CSMA             0x0001  /* 1=PHY is capable of 802.3 CMSA */
 733
 734 /* PHY Auto-negotiation Remote End Capability Register */
 735 #define PHY_RMT_REG             0x05
 736 /* Uses same bit definitions as PHY_AD_REG */
 737
 738 /* PHY Configuration Register 1 */
 739 #define PHY_CFG1_REG            0x10
 740 #define PHY_CFG1_LNKDIS         0x8000  /* 1=Rx Link Detect Function disabled */
 741 #define PHY_CFG1_XMTDIS         0x4000  /* 1=TP Transmitter Disabled */
 742 #define PHY_CFG1_XMTPDN         0x2000  /* 1=TP Transmitter Powered Down */
 743 #define PHY_CFG1_BYPSCR         0x0400  /* 1=Bypass scrambler/descrambler */
 744 #define PHY_CFG1_UNSCDS         0x0200  /* 1=Unscramble Idle Reception Disable */
 745 #define PHY_CFG1_EQLZR          0x0100  /* 1=Rx Equalizer Disabled */
 746 #define PHY_CFG1_CABLE          0x0080  /* 1=STP(150ohm), 0=UTP(100ohm) */
 747 #define PHY_CFG1_RLVL0          0x0040  /* 1=Rx Squelch level reduced by 4.5db */
 748 #define PHY_CFG1_TLVL_SHIFT     2       /* Transmit Output Level Adjust */
 749 #define PHY_CFG1_TLVL_MASK      0x003C
 750 #define PHY_CFG1_TRF_MASK       0x0003  /* Transmitter Rise/Fall time */
 751
 752
 753 /* PHY Configuration Register 2 */
 754 #define PHY_CFG2_REG            0x11
 755 #define PHY_CFG2_APOLDIS        0x0020  /* 1=Auto Polarity Correction disabled */
 756 #define PHY_CFG2_JABDIS         0x0010  /* 1=Jabber disabled */
 757 #define PHY_CFG2_MREG           0x0008  /* 1=Multiple register access (MII mgt) */
 758 #define PHY_CFG2_INTMDIO        0x0004  /* 1=Interrupt signaled with MDIO pulseo */
 759
 760 /* PHY Status Output (and Interrupt status) Register */
 761 #define PHY_INT_REG             0x12    /* Status Output (Interrupt Status) */
 762 #define PHY_INT_INT             0x8000  /* 1=bits have changed since last read */
 763 #define PHY_INT_LNKFAIL         0x4000  /* 1=Link Not detected */
 764 #define PHY_INT_LOSSSYNC        0x2000  /* 1=Descrambler has lost sync */
 765 #define PHY_INT_CWRD            0x1000  /* 1=Invalid 4B5B code detected on rx */
 766 #define PHY_INT_SSD             0x0800  /* 1=No Start Of Stream detected on rx */
 767 #define PHY_INT_ESD             0x0400  /* 1=No End Of Stream detected on rx */
 768 #define PHY_INT_RPOL            0x0200  /* 1=Reverse Polarity detected */
 769 #define PHY_INT_JAB             0x0100  /* 1=Jabber detected */
 770 #define PHY_INT_SPDDET          0x0080  /* 1=100Base-TX mode, 0=10Base-T mode */
 771 #define PHY_INT_DPLXDET         0x0040  /* 1=Device in Full Duplex */
 772
 773 /* PHY Interrupt/Status Mask Register */
 774 #define PHY_MASK_REG            0x13    /* Interrupt Mask */
 775 /* Uses the same bit definitions as PHY_INT_REG */
 776
 777
 778 /*-------------------------------------------------------------------------
 779  .  I define some macros to make it easier to do somewhat common
 780  . or slightly complicated, repeated tasks.
 781  --------------------------------------------------------------------------*/
 782
 783 /* select a register bank, 0 to 3  */
 784
 785 #define SMC_SELECT_BANK(a,x)  { SMC_outw((a), (x), BANK_SELECT ); }
 786
 787 /* this enables an interrupt in the interrupt mask register */
 788 #define SMC_ENABLE_INT(a,x) {\
 789                 unsigned char mask;\
 790                 SMC_SELECT_BANK((a),2);\
 791                 mask = SMC_inb((a), IM_REG );\
 792                 mask |= (x);\
 793                 SMC_outb( (a), mask, IM_REG ); \
 794 }
 795
 796 /* this disables an interrupt from the interrupt mask register */
 797
 798 #define SMC_DISABLE_INT(a,x) {\
 799                 unsigned char mask;\
 800                 SMC_SELECT_BANK(2);\
 801                 mask = SMC_inb( (a), IM_REG );\
 802                 mask &= ~(x);\
 803                 SMC_outb( (a), mask, IM_REG ); \
 804 }
 805
 806 /*----------------------------------------------------------------------
 807  . Define the interrupts that I want to receive from the card
 808  .
 809  . I want:
 810  .  IM_EPH_INT, for nasty errors
 811  .  IM_RCV_INT, for happy received packets
 812  .  IM_RX_OVRN_INT, because I have to kick the receiver
 813  .  IM_MDINT, for PHY Register 18 Status Changes
 814  --------------------------------------------------------------------------*/
 815 #define SMC_INTERRUPT_MASK   (IM_EPH_INT | IM_RX_OVRN_INT | IM_RCV_INT | \
 816         IM_MDINT)
 817
 818 #endif  /* _SMC_91111_H_ */