]> git.ipfire.org Git - people/ms/u-boot.git/blob - drivers/pci/pci_auto_old.c
net: e1000: implement eth_write_hwaddr
[people/ms/u-boot.git] / drivers / pci / pci_auto_old.c
1 /*
2 * PCI autoconfiguration library (legacy version, do not change)
3 *
4 * Author: Matt Porter <mporter@mvista.com>
5 *
6 * Copyright 2000 MontaVista Software Inc.
7 *
8 * SPDX-License-Identifier: GPL-2.0+
9 */
10
11 #include <common.h>
12 #include <errno.h>
13 #include <pci.h>
14
15 /*
16 * Do not change this file. Instead, convert your board to use CONFIG_DM_PCI
17 * and change pci_auto.c.
18 */
19
20 /* the user can define CONFIG_SYS_PCI_CACHE_LINE_SIZE to avoid problems */
21 #ifndef CONFIG_SYS_PCI_CACHE_LINE_SIZE
22 #define CONFIG_SYS_PCI_CACHE_LINE_SIZE 8
23 #endif
24
25 /*
26 *
27 */
28
29 void pciauto_setup_device(struct pci_controller *hose,
30 pci_dev_t dev, int bars_num,
31 struct pci_region *mem,
32 struct pci_region *prefetch,
33 struct pci_region *io)
34 {
35 u32 bar_response;
36 pci_size_t bar_size;
37 u16 cmdstat = 0;
38 int bar, bar_nr = 0;
39 #ifndef CONFIG_PCI_ENUM_ONLY
40 u8 header_type;
41 int rom_addr;
42 pci_addr_t bar_value;
43 struct pci_region *bar_res;
44 int found_mem64 = 0;
45 #endif
46 u16 class;
47
48 pci_hose_read_config_word(hose, dev, PCI_COMMAND, &cmdstat);
49 cmdstat = (cmdstat & ~(PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) | PCI_COMMAND_MASTER;
50
51 for (bar = PCI_BASE_ADDRESS_0;
52 bar < PCI_BASE_ADDRESS_0 + (bars_num * 4); bar += 4) {
53 /* Tickle the BAR and get the response */
54 #ifndef CONFIG_PCI_ENUM_ONLY
55 pci_hose_write_config_dword(hose, dev, bar, 0xffffffff);
56 #endif
57 pci_hose_read_config_dword(hose, dev, bar, &bar_response);
58
59 /* If BAR is not implemented go to the next BAR */
60 if (!bar_response)
61 continue;
62
63 #ifndef CONFIG_PCI_ENUM_ONLY
64 found_mem64 = 0;
65 #endif
66
67 /* Check the BAR type and set our address mask */
68 if (bar_response & PCI_BASE_ADDRESS_SPACE) {
69 bar_size = ((~(bar_response & PCI_BASE_ADDRESS_IO_MASK))
70 & 0xffff) + 1;
71 #ifndef CONFIG_PCI_ENUM_ONLY
72 bar_res = io;
73 #endif
74
75 debug("PCI Autoconfig: BAR %d, I/O, size=0x%llx, ",
76 bar_nr, (unsigned long long)bar_size);
77 } else {
78 if ((bar_response & PCI_BASE_ADDRESS_MEM_TYPE_MASK) ==
79 PCI_BASE_ADDRESS_MEM_TYPE_64) {
80 u32 bar_response_upper;
81 u64 bar64;
82
83 #ifndef CONFIG_PCI_ENUM_ONLY
84 pci_hose_write_config_dword(hose, dev, bar + 4,
85 0xffffffff);
86 #endif
87 pci_hose_read_config_dword(hose, dev, bar + 4,
88 &bar_response_upper);
89
90 bar64 = ((u64)bar_response_upper << 32) | bar_response;
91
92 bar_size = ~(bar64 & PCI_BASE_ADDRESS_MEM_MASK) + 1;
93 #ifndef CONFIG_PCI_ENUM_ONLY
94 found_mem64 = 1;
95 #endif
96 } else {
97 bar_size = (u32)(~(bar_response & PCI_BASE_ADDRESS_MEM_MASK) + 1);
98 }
99 #ifndef CONFIG_PCI_ENUM_ONLY
100 if (prefetch && (bar_response & PCI_BASE_ADDRESS_MEM_PREFETCH))
101 bar_res = prefetch;
102 else
103 bar_res = mem;
104
105 debug("PCI Autoconfig: BAR %d, %s, size=0x%llx, ",
106 bar_nr, bar_res == prefetch ? "Prf" : "Mem",
107 (unsigned long long)bar_size);
108 #endif
109 }
110
111 #ifndef CONFIG_PCI_ENUM_ONLY
112 if (pciauto_region_allocate(bar_res, bar_size, &bar_value) == 0) {
113 /* Write it out and update our limit */
114 pci_hose_write_config_dword(hose, dev, bar, (u32)bar_value);
115
116 if (found_mem64) {
117 bar += 4;
118 #ifdef CONFIG_SYS_PCI_64BIT
119 pci_hose_write_config_dword(hose, dev, bar, (u32)(bar_value>>32));
120 #else
121 /*
122 * If we are a 64-bit decoder then increment to the
123 * upper 32 bits of the bar and force it to locate
124 * in the lower 4GB of memory.
125 */
126 pci_hose_write_config_dword(hose, dev, bar, 0x00000000);
127 #endif
128 }
129
130 }
131 #endif
132 cmdstat |= (bar_response & PCI_BASE_ADDRESS_SPACE) ?
133 PCI_COMMAND_IO : PCI_COMMAND_MEMORY;
134
135 debug("\n");
136
137 bar_nr++;
138 }
139
140 #ifndef CONFIG_PCI_ENUM_ONLY
141 /* Configure the expansion ROM address */
142 pci_hose_read_config_byte(hose, dev, PCI_HEADER_TYPE, &header_type);
143 header_type &= 0x7f;
144 if (header_type != PCI_HEADER_TYPE_CARDBUS) {
145 rom_addr = (header_type == PCI_HEADER_TYPE_NORMAL) ?
146 PCI_ROM_ADDRESS : PCI_ROM_ADDRESS1;
147 pci_hose_write_config_dword(hose, dev, rom_addr, 0xfffffffe);
148 pci_hose_read_config_dword(hose, dev, rom_addr, &bar_response);
149 if (bar_response) {
150 bar_size = -(bar_response & ~1);
151 debug("PCI Autoconfig: ROM, size=%#x, ",
152 (unsigned int)bar_size);
153 if (pciauto_region_allocate(mem, bar_size,
154 &bar_value) == 0) {
155 pci_hose_write_config_dword(hose, dev, rom_addr,
156 bar_value);
157 }
158 cmdstat |= PCI_COMMAND_MEMORY;
159 debug("\n");
160 }
161 }
162 #endif
163
164 /* PCI_COMMAND_IO must be set for VGA device */
165 pci_hose_read_config_word(hose, dev, PCI_CLASS_DEVICE, &class);
166 if (class == PCI_CLASS_DISPLAY_VGA)
167 cmdstat |= PCI_COMMAND_IO;
168
169 pci_hose_write_config_word(hose, dev, PCI_COMMAND, cmdstat);
170 pci_hose_write_config_byte(hose, dev, PCI_CACHE_LINE_SIZE,
171 CONFIG_SYS_PCI_CACHE_LINE_SIZE);
172 pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80);
173 }
174
175 void pciauto_prescan_setup_bridge(struct pci_controller *hose,
176 pci_dev_t dev, int sub_bus)
177 {
178 struct pci_region *pci_mem;
179 struct pci_region *pci_prefetch;
180 struct pci_region *pci_io;
181 u16 cmdstat, prefechable_64;
182
183 pci_mem = hose->pci_mem;
184 pci_prefetch = hose->pci_prefetch;
185 pci_io = hose->pci_io;
186
187 pci_hose_read_config_word(hose, dev, PCI_COMMAND, &cmdstat);
188 pci_hose_read_config_word(hose, dev, PCI_PREF_MEMORY_BASE,
189 &prefechable_64);
190 prefechable_64 &= PCI_PREF_RANGE_TYPE_MASK;
191
192 /* Configure bus number registers */
193 pci_hose_write_config_byte(hose, dev, PCI_PRIMARY_BUS,
194 PCI_BUS(dev) - hose->first_busno);
195 pci_hose_write_config_byte(hose, dev, PCI_SECONDARY_BUS,
196 sub_bus - hose->first_busno);
197 pci_hose_write_config_byte(hose, dev, PCI_SUBORDINATE_BUS, 0xff);
198
199 if (pci_mem) {
200 /* Round memory allocator to 1MB boundary */
201 pciauto_region_align(pci_mem, 0x100000);
202
203 /* Set up memory and I/O filter limits, assume 32-bit I/O space */
204 pci_hose_write_config_word(hose, dev, PCI_MEMORY_BASE,
205 (pci_mem->bus_lower & 0xfff00000) >> 16);
206
207 cmdstat |= PCI_COMMAND_MEMORY;
208 }
209
210 if (pci_prefetch) {
211 /* Round memory allocator to 1MB boundary */
212 pciauto_region_align(pci_prefetch, 0x100000);
213
214 /* Set up memory and I/O filter limits, assume 32-bit I/O space */
215 pci_hose_write_config_word(hose, dev, PCI_PREF_MEMORY_BASE,
216 (pci_prefetch->bus_lower & 0xfff00000) >> 16);
217 if (prefechable_64 == PCI_PREF_RANGE_TYPE_64)
218 #ifdef CONFIG_SYS_PCI_64BIT
219 pci_hose_write_config_dword(hose, dev,
220 PCI_PREF_BASE_UPPER32,
221 pci_prefetch->bus_lower >> 32);
222 #else
223 pci_hose_write_config_dword(hose, dev,
224 PCI_PREF_BASE_UPPER32,
225 0x0);
226 #endif
227
228 cmdstat |= PCI_COMMAND_MEMORY;
229 } else {
230 /* We don't support prefetchable memory for now, so disable */
231 pci_hose_write_config_word(hose, dev, PCI_PREF_MEMORY_BASE, 0x1000);
232 pci_hose_write_config_word(hose, dev, PCI_PREF_MEMORY_LIMIT, 0x0);
233 if (prefechable_64 == PCI_PREF_RANGE_TYPE_64) {
234 pci_hose_write_config_word(hose, dev, PCI_PREF_BASE_UPPER32, 0x0);
235 pci_hose_write_config_word(hose, dev, PCI_PREF_LIMIT_UPPER32, 0x0);
236 }
237 }
238
239 if (pci_io) {
240 /* Round I/O allocator to 4KB boundary */
241 pciauto_region_align(pci_io, 0x1000);
242
243 pci_hose_write_config_byte(hose, dev, PCI_IO_BASE,
244 (pci_io->bus_lower & 0x0000f000) >> 8);
245 pci_hose_write_config_word(hose, dev, PCI_IO_BASE_UPPER16,
246 (pci_io->bus_lower & 0xffff0000) >> 16);
247
248 cmdstat |= PCI_COMMAND_IO;
249 }
250
251 /* Enable memory and I/O accesses, enable bus master */
252 pci_hose_write_config_word(hose, dev, PCI_COMMAND,
253 cmdstat | PCI_COMMAND_MASTER);
254 }
255
256 void pciauto_postscan_setup_bridge(struct pci_controller *hose,
257 pci_dev_t dev, int sub_bus)
258 {
259 struct pci_region *pci_mem;
260 struct pci_region *pci_prefetch;
261 struct pci_region *pci_io;
262
263 pci_mem = hose->pci_mem;
264 pci_prefetch = hose->pci_prefetch;
265 pci_io = hose->pci_io;
266
267 /* Configure bus number registers */
268 pci_hose_write_config_byte(hose, dev, PCI_SUBORDINATE_BUS,
269 sub_bus - hose->first_busno);
270
271 if (pci_mem) {
272 /* Round memory allocator to 1MB boundary */
273 pciauto_region_align(pci_mem, 0x100000);
274
275 pci_hose_write_config_word(hose, dev, PCI_MEMORY_LIMIT,
276 (pci_mem->bus_lower - 1) >> 16);
277 }
278
279 if (pci_prefetch) {
280 u16 prefechable_64;
281
282 pci_hose_read_config_word(hose, dev,
283 PCI_PREF_MEMORY_LIMIT,
284 &prefechable_64);
285 prefechable_64 &= PCI_PREF_RANGE_TYPE_MASK;
286
287 /* Round memory allocator to 1MB boundary */
288 pciauto_region_align(pci_prefetch, 0x100000);
289
290 pci_hose_write_config_word(hose, dev, PCI_PREF_MEMORY_LIMIT,
291 (pci_prefetch->bus_lower - 1) >> 16);
292 if (prefechable_64 == PCI_PREF_RANGE_TYPE_64)
293 #ifdef CONFIG_SYS_PCI_64BIT
294 pci_hose_write_config_dword(hose, dev,
295 PCI_PREF_LIMIT_UPPER32,
296 (pci_prefetch->bus_lower - 1) >> 32);
297 #else
298 pci_hose_write_config_dword(hose, dev,
299 PCI_PREF_LIMIT_UPPER32,
300 0x0);
301 #endif
302 }
303
304 if (pci_io) {
305 /* Round I/O allocator to 4KB boundary */
306 pciauto_region_align(pci_io, 0x1000);
307
308 pci_hose_write_config_byte(hose, dev, PCI_IO_LIMIT,
309 ((pci_io->bus_lower - 1) & 0x0000f000) >> 8);
310 pci_hose_write_config_word(hose, dev, PCI_IO_LIMIT_UPPER16,
311 ((pci_io->bus_lower - 1) & 0xffff0000) >> 16);
312 }
313 }
314
315
316 /*
317 * HJF: Changed this to return int. I think this is required
318 * to get the correct result when scanning bridges
319 */
320 int pciauto_config_device(struct pci_controller *hose, pci_dev_t dev)
321 {
322 struct pci_region *pci_mem;
323 struct pci_region *pci_prefetch;
324 struct pci_region *pci_io;
325 unsigned int sub_bus = PCI_BUS(dev);
326 unsigned short class;
327 int n;
328
329 pci_mem = hose->pci_mem;
330 pci_prefetch = hose->pci_prefetch;
331 pci_io = hose->pci_io;
332
333 pci_hose_read_config_word(hose, dev, PCI_CLASS_DEVICE, &class);
334
335 switch (class) {
336 case PCI_CLASS_BRIDGE_PCI:
337 debug("PCI Autoconfig: Found P2P bridge, device %d\n",
338 PCI_DEV(dev));
339
340 pciauto_setup_device(hose, dev, 2, pci_mem,
341 pci_prefetch, pci_io);
342
343 /* Passing in current_busno allows for sibling P2P bridges */
344 hose->current_busno++;
345 pciauto_prescan_setup_bridge(hose, dev, hose->current_busno);
346 /*
347 * need to figure out if this is a subordinate bridge on the bus
348 * to be able to properly set the pri/sec/sub bridge registers.
349 */
350 n = pci_hose_scan_bus(hose, hose->current_busno);
351
352 /* figure out the deepest we've gone for this leg */
353 sub_bus = max((unsigned int)n, sub_bus);
354 pciauto_postscan_setup_bridge(hose, dev, sub_bus);
355
356 sub_bus = hose->current_busno;
357 break;
358
359 case PCI_CLASS_BRIDGE_CARDBUS:
360 /*
361 * just do a minimal setup of the bridge,
362 * let the OS take care of the rest
363 */
364 pciauto_setup_device(hose, dev, 0, pci_mem,
365 pci_prefetch, pci_io);
366
367 debug("PCI Autoconfig: Found P2CardBus bridge, device %d\n",
368 PCI_DEV(dev));
369
370 hose->current_busno++;
371 break;
372
373 #if defined(CONFIG_PCIAUTO_SKIP_HOST_BRIDGE)
374 case PCI_CLASS_BRIDGE_OTHER:
375 debug("PCI Autoconfig: Skipping bridge device %d\n",
376 PCI_DEV(dev));
377 break;
378 #endif
379 #if defined(CONFIG_MPC834x) && !defined(CONFIG_VME8349)
380 case PCI_CLASS_BRIDGE_OTHER:
381 /*
382 * The host/PCI bridge 1 seems broken in 8349 - it presents
383 * itself as 'PCI_CLASS_BRIDGE_OTHER' and appears as an _agent_
384 * device claiming resources io/mem/irq.. we only allow for
385 * the PIMMR window to be allocated (BAR0 - 1MB size)
386 */
387 debug("PCI Autoconfig: Broken bridge found, only minimal config\n");
388 pciauto_setup_device(hose, dev, 0, hose->pci_mem,
389 hose->pci_prefetch, hose->pci_io);
390 break;
391 #endif
392
393 case PCI_CLASS_PROCESSOR_POWERPC: /* an agent or end-point */
394 debug("PCI AutoConfig: Found PowerPC device\n");
395
396 default:
397 pciauto_setup_device(hose, dev, 6, pci_mem,
398 pci_prefetch, pci_io);
399 break;
400 }
401
402 return sub_bus;
403 }