drivers/remoteproc/Kconfig

   1 menu "Remoteproc drivers"
   2
   3 config REMOTEPROC
   4         tristate "Support for Remote Processor subsystem"
   5         depends on HAS_DMA
   6         select CRC32
   7         select FW_LOADER
   8         select VIRTIO
   9         select WANT_DEV_COREDUMP
  10         help
  11           Support for remote processors (such as DSP coprocessors). These
  12           are mainly used on embedded systems.
  13
  14 if REMOTEPROC
  15
  16 config IMX_REMOTEPROC
  17         tristate "IMX6/7 remoteproc support"
  18         depends on SOC_IMX6SX || SOC_IMX7D
  19         help
  20           Say y here to support iMX's remote processors (Cortex M4
  21           on iMX7D) via the remote processor framework.
  22
  23           It's safe to say N here.
  24
  25 config OMAP_REMOTEPROC
  26         tristate "OMAP remoteproc support"
  27         depends on ARCH_OMAP4 || SOC_OMAP5
  28         depends on OMAP_IOMMU
  29         select MAILBOX
  30         select OMAP2PLUS_MBOX
  31         help
  32           Say y here to support OMAP's remote processors (dual M3
  33           and DSP on OMAP4) via the remote processor framework.
  34
  35           Currently only supported on OMAP4.
  36
  37           Usually you want to say Y here, in order to enable multimedia
  38           use-cases to run on your platform (multimedia codecs are
  39           offloaded to remote DSP processors using this framework).
  40
  41           It's safe to say N here if you're not interested in multimedia
  42           offloading or just want a bare minimum kernel.
  43
  44 config WKUP_M3_RPROC
  45         tristate "AMx3xx Wakeup M3 remoteproc support"
  46         depends on SOC_AM33XX || SOC_AM43XX
  47         help
  48           Say y here to support Wakeup M3 remote processor on TI AM33xx
  49           and AM43xx family of SoCs.
  50
  51           Required for Suspend-to-RAM on AM33xx and AM43xx SoCs. Also needed
  52           for deep CPUIdle states on AM33xx SoCs. Allows for loading of the
  53           firmware onto these remote processors.
  54           If unsure say N.
  55
  56 config DA8XX_REMOTEPROC
  57         tristate "DA8xx/OMAP-L13x remoteproc support"
  58         depends on ARCH_DAVINCI_DA8XX
  59         depends on DMA_CMA
  60         help
  61           Say y here to support DA8xx/OMAP-L13x remote processors via the
  62           remote processor framework.
  63
  64           You want to say y here in order to enable AMP
  65           use-cases to run on your platform (multimedia codecs are
  66           offloaded to remote DSP processors using this framework).
  67
  68           This module controls the name of the firmware file that gets
  69           loaded on the DSP.  This file must reside in the /lib/firmware
  70           directory.  It can be specified via the module parameter
  71           da8xx_fw_name=<filename>, and if not specified will default to
  72           "rproc-dsp-fw".
  73
  74           It's safe to say n here if you're not interested in multimedia
  75           offloading.
  76
  77 config KEYSTONE_REMOTEPROC
  78         tristate "Keystone Remoteproc support"
  79         depends on ARCH_KEYSTONE
  80         help
  81           Say Y here here to support Keystone remote processors (DSP)
  82           via the remote processor framework.
  83
  84           It's safe to say N here if you're not interested in the Keystone
  85           DSPs or just want to use a bare minimum kernel.
  86
  87 config QCOM_RPROC_COMMON
  88         tristate
  89
  90 config QCOM_Q6V5_COMMON
  91         tristate
  92         depends on ARCH_QCOM
  93         depends on QCOM_SMEM
  94
  95 config QCOM_Q6V5_ADSP
  96         tristate "Qualcomm Technology Inc ADSP Peripheral Image Loader"
  97         depends on OF && ARCH_QCOM
  98         depends on QCOM_SMEM
  99         depends on RPMSG_QCOM_SMD || (COMPILE_TEST && RPMSG_QCOM_SMD=n)
 100         depends on RPMSG_QCOM_GLINK_SMEM || RPMSG_QCOM_GLINK_SMEM=n
 101         depends on QCOM_SYSMON || QCOM_SYSMON=n
 102         select MFD_SYSCON
 103         select QCOM_MDT_LOADER
 104         select QCOM_Q6V5_COMMON
 105         select QCOM_RPROC_COMMON
 106         help
 107           Say y here to support the Peripheral Image Loader
 108           for the Qualcomm Technology Inc. ADSP remote processors.
 109
 110 config QCOM_Q6V5_MSS
 111         tristate "Qualcomm Hexagon V5 self-authenticating modem subsystem support"
 112         depends on OF && ARCH_QCOM
 113         depends on QCOM_SMEM
 114         depends on RPMSG_QCOM_SMD || (COMPILE_TEST && RPMSG_QCOM_SMD=n)
 115         depends on RPMSG_QCOM_GLINK_SMEM || RPMSG_QCOM_GLINK_SMEM=n
 116         depends on QCOM_SYSMON || QCOM_SYSMON=n
 117         select MFD_SYSCON
 118         select QCOM_Q6V5_COMMON
 119         select QCOM_RPROC_COMMON
 120         select QCOM_SCM
 121         help
 122           Say y here to support the Qualcomm self-authenticating modem
 123           subsystem based on Hexagon V5.
 124
 125 config QCOM_Q6V5_PAS
 126         tristate "Qualcomm Hexagon v5 Peripheral Authentication Service support"
 127         depends on OF && ARCH_QCOM
 128         depends on QCOM_SMEM
 129         depends on RPMSG_QCOM_SMD || (COMPILE_TEST && RPMSG_QCOM_SMD=n)
 130         depends on RPMSG_QCOM_GLINK_SMEM || RPMSG_QCOM_GLINK_SMEM=n
 131         depends on QCOM_SYSMON || QCOM_SYSMON=n
 132         select MFD_SYSCON
 133         select QCOM_MDT_LOADER
 134         select QCOM_Q6V5_COMMON
 135         select QCOM_RPROC_COMMON
 136         select QCOM_SCM
 137         help
 138           Say y here to support the TrustZone based Peripherial Image Loader
 139           for the Qualcomm Hexagon v5 based remote processors. This is commonly
 140           used to control subsystems such as ADSP, Compute and Sensor.
 141
 142 config QCOM_Q6V5_WCSS
 143         tristate "Qualcomm Hexagon based WCSS Peripheral Image Loader"
 144         depends on OF && ARCH_QCOM
 145         depends on QCOM_SMEM
 146         depends on RPMSG_QCOM_SMD || (COMPILE_TEST && RPMSG_QCOM_SMD=n)
 147         depends on RPMSG_QCOM_GLINK_SMEM || RPMSG_QCOM_GLINK_SMEM=n
 148         depends on QCOM_SYSMON || QCOM_SYSMON=n
 149         select MFD_SYSCON
 150         select QCOM_MDT_LOADER
 151         select QCOM_Q6V5_COMMON
 152         select QCOM_RPROC_COMMON
 153         select QCOM_SCM
 154         help
 155           Say y here to support the Qualcomm Peripheral Image Loader for the
 156           Hexagon V5 based WCSS remote processors.
 157
 158 config QCOM_SYSMON
 159         tristate "Qualcomm sysmon driver"
 160         depends on RPMSG
 161         depends on ARCH_QCOM
 162         depends on NET
 163         select QCOM_QMI_HELPERS
 164         help
 165           The sysmon driver implements a sysmon QMI client and a handler for
 166           the sys_mon SMD and GLINK channel, which are used for graceful
 167           shutdown, retrieving failure information and propagating information
 168           about other subsystems being shut down.
 169
 170           Say y here if your system runs firmware on any other subsystems, e.g.
 171           modem or DSP.
 172
 173 config QCOM_WCNSS_PIL
 174         tristate "Qualcomm WCNSS Peripheral Image Loader"
 175         depends on OF && ARCH_QCOM
 176         depends on RPMSG_QCOM_SMD || (COMPILE_TEST && RPMSG_QCOM_SMD=n)
 177         depends on RPMSG_QCOM_GLINK_SMEM || RPMSG_QCOM_GLINK_SMEM=n
 178         depends on QCOM_SMEM
 179         depends on QCOM_SYSMON || QCOM_SYSMON=n
 180         select QCOM_MDT_LOADER
 181         select QCOM_RPROC_COMMON
 182         select QCOM_SCM
 183         help
 184           Say y here to support the Peripheral Image Loader for the Qualcomm
 185           Wireless Connectivity Subsystem.
 186
 187 config ST_REMOTEPROC
 188         tristate "ST remoteproc support"
 189         depends on ARCH_STI
 190         select MAILBOX
 191         select STI_MBOX
 192         help
 193           Say y here to support ST's adjunct processors via the remote
 194           processor framework.
 195           This can be either built-in or a loadable module.
 196
 197 config ST_SLIM_REMOTEPROC
 198         tristate
 199
 200 endif # REMOTEPROC
 201
 202 endmenu