3 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
5 * SPDX-License-Identifier: GPL-2.0+
9 #include <environment.h>
11 #include <stdio_dev.h>
13 #include <linux/compiler.h>
16 DECLARE_GLOBAL_DATA_PTR
;
18 static struct serial_device
*serial_devices
;
19 static struct serial_device
*serial_current
;
21 * Table with supported baudrates (defined in config_xyz.h)
23 static const unsigned long baudrate_table
[] = CONFIG_SYS_BAUDRATE_TABLE
;
26 * serial_null() - Void registration routine of a serial driver
28 * This routine implements a void registration routine of a serial
29 * driver. The registration routine of a particular driver is aliased
30 * to this empty function in case the driver is not compiled into
33 static void serial_null(void)
38 * on_baudrate() - Update the actual baudrate when the env var changes
40 * This will check for a valid baudrate and only apply it if valid.
42 static int on_baudrate(const char *name
, const char *value
, enum env_op op
,
50 case env_op_overwrite
:
52 * Switch to new baudrate if new baudrate is supported
54 baudrate
= simple_strtoul(value
, NULL
, 10);
56 /* Not actually changing */
57 if (gd
->baudrate
== baudrate
)
60 for (i
= 0; i
< ARRAY_SIZE(baudrate_table
); ++i
) {
61 if (baudrate
== baudrate_table
[i
])
64 if (i
== ARRAY_SIZE(baudrate_table
)) {
65 if ((flags
& H_FORCE
) == 0)
66 printf("## Baudrate %d bps not supported\n",
70 if ((flags
& H_INTERACTIVE
) != 0) {
71 printf("## Switch baudrate to %d"
72 " bps and press ENTER ...\n", baudrate
);
76 gd
->baudrate
= baudrate
;
77 #if defined(CONFIG_PPC) || defined(CONFIG_MCF52x2)
78 gd
->bd
->bi_baudrate
= baudrate
;
85 if ((flags
& H_INTERACTIVE
) != 0)
93 printf("## Baudrate may not be deleted\n");
99 U_BOOT_ENV_CALLBACK(baudrate
, on_baudrate
);
102 * serial_initfunc() - Forward declare of driver registration routine
103 * @name: Name of the real driver registration routine.
105 * This macro expands onto forward declaration of a driver registration
106 * routine, which is then used below in serial_initialize() function.
107 * The declaration is made weak and aliases to serial_null() so in case
108 * the driver is not compiled in, the function is still declared and can
109 * be used, but aliases to serial_null() and thus is optimized away.
111 #define serial_initfunc(name) \
113 __attribute__((weak, alias("serial_null")));
115 serial_initfunc(mpc8xx_serial_initialize
);
116 serial_initfunc(ns16550_serial_initialize
);
117 serial_initfunc(pxa_serial_initialize
);
118 serial_initfunc(s3c24xx_serial_initialize
);
119 serial_initfunc(s5p_serial_initialize
);
120 serial_initfunc(zynq_serial_initalize
);
121 serial_initfunc(bfin_serial_initialize
);
122 serial_initfunc(bfin_jtag_initialize
);
123 serial_initfunc(mpc512x_serial_initialize
);
124 serial_initfunc(uartlite_serial_initialize
);
125 serial_initfunc(au1x00_serial_initialize
);
126 serial_initfunc(asc_serial_initialize
);
127 serial_initfunc(jz_serial_initialize
);
128 serial_initfunc(mpc5xx_serial_initialize
);
129 serial_initfunc(mpc8260_scc_serial_initialize
);
130 serial_initfunc(mpc8260_smc_serial_initialize
);
131 serial_initfunc(mpc85xx_serial_initialize
);
132 serial_initfunc(iop480_serial_initialize
);
133 serial_initfunc(leon2_serial_initialize
);
134 serial_initfunc(leon3_serial_initialize
);
135 serial_initfunc(marvell_serial_initialize
);
136 serial_initfunc(amirix_serial_initialize
);
137 serial_initfunc(bmw_serial_initialize
);
138 serial_initfunc(cogent_serial_initialize
);
139 serial_initfunc(cpci750_serial_initialize
);
140 serial_initfunc(evb64260_serial_initialize
);
141 serial_initfunc(ml2_serial_initialize
);
142 serial_initfunc(sconsole_serial_initialize
);
143 serial_initfunc(p3mx_serial_initialize
);
144 serial_initfunc(altera_jtag_serial_initialize
);
145 serial_initfunc(altera_serial_initialize
);
146 serial_initfunc(atmel_serial_initialize
);
147 serial_initfunc(lpc32xx_serial_initialize
);
148 serial_initfunc(mcf_serial_initialize
);
149 serial_initfunc(oc_serial_initialize
);
150 serial_initfunc(sandbox_serial_initialize
);
151 serial_initfunc(clps7111_serial_initialize
);
152 serial_initfunc(imx_serial_initialize
);
153 serial_initfunc(ks8695_serial_initialize
);
154 serial_initfunc(lh7a40x_serial_initialize
);
155 serial_initfunc(max3100_serial_initialize
);
156 serial_initfunc(mxc_serial_initialize
);
157 serial_initfunc(pl01x_serial_initialize
);
158 serial_initfunc(sa1100_serial_initialize
);
159 serial_initfunc(sh_serial_initialize
);
160 serial_initfunc(arm_dcc_initialize
);
161 serial_initfunc(mxs_auart_initialize
);
164 * serial_register() - Register serial driver with serial driver core
165 * @dev: Pointer to the serial driver structure
167 * This function registers the serial driver supplied via @dev with
168 * serial driver core, thus making U-Boot aware of it and making it
169 * available for U-Boot to use. On platforms that still require manual
170 * relocation of constant variables, relocation of the supplied structure
173 void serial_register(struct serial_device
*dev
)
175 #ifdef CONFIG_NEEDS_MANUAL_RELOC
177 dev
->start
+= gd
->reloc_off
;
179 dev
->stop
+= gd
->reloc_off
;
181 dev
->setbrg
+= gd
->reloc_off
;
183 dev
->getc
+= gd
->reloc_off
;
185 dev
->tstc
+= gd
->reloc_off
;
187 dev
->putc
+= gd
->reloc_off
;
189 dev
->puts
+= gd
->reloc_off
;
192 dev
->next
= serial_devices
;
193 serial_devices
= dev
;
197 * serial_initialize() - Register all compiled-in serial port drivers
199 * This function registers all serial port drivers that are compiled
200 * into the U-Boot binary with the serial core, thus making them
201 * available to U-Boot to use. Lastly, this function assigns a default
202 * serial port to the serial core. That serial port is then used as a
205 void serial_initialize(void)
207 mpc8xx_serial_initialize();
208 ns16550_serial_initialize();
209 pxa_serial_initialize();
210 s3c24xx_serial_initialize();
211 s5p_serial_initialize();
212 mpc512x_serial_initialize();
213 bfin_serial_initialize();
214 bfin_jtag_initialize();
215 uartlite_serial_initialize();
216 zynq_serial_initalize();
217 au1x00_serial_initialize();
218 asc_serial_initialize();
219 jz_serial_initialize();
220 mpc5xx_serial_initialize();
221 mpc8260_scc_serial_initialize();
222 mpc8260_smc_serial_initialize();
223 mpc85xx_serial_initialize();
224 iop480_serial_initialize();
225 leon2_serial_initialize();
226 leon3_serial_initialize();
227 marvell_serial_initialize();
228 amirix_serial_initialize();
229 bmw_serial_initialize();
230 cogent_serial_initialize();
231 cpci750_serial_initialize();
232 evb64260_serial_initialize();
233 ml2_serial_initialize();
234 sconsole_serial_initialize();
235 p3mx_serial_initialize();
236 altera_jtag_serial_initialize();
237 altera_serial_initialize();
238 atmel_serial_initialize();
239 lpc32xx_serial_initialize();
240 mcf_serial_initialize();
241 oc_serial_initialize();
242 sandbox_serial_initialize();
243 clps7111_serial_initialize();
244 imx_serial_initialize();
245 ks8695_serial_initialize();
246 lh7a40x_serial_initialize();
247 max3100_serial_initialize();
248 mxc_serial_initialize();
249 pl01x_serial_initialize();
250 sa1100_serial_initialize();
251 sh_serial_initialize();
252 arm_dcc_initialize();
253 mxs_auart_initialize();
255 serial_assign(default_serial_console()->name
);
259 * serial_stdio_init() - Register serial ports with STDIO core
261 * This function generates a proxy driver for each serial port driver.
262 * These proxy drivers then register with the STDIO core, making the
263 * serial drivers available as STDIO devices.
265 void serial_stdio_init(void)
267 struct stdio_dev dev
;
268 struct serial_device
*s
= serial_devices
;
271 memset(&dev
, 0, sizeof(dev
));
273 strcpy(dev
.name
, s
->name
);
274 dev
.flags
= DEV_FLAGS_OUTPUT
| DEV_FLAGS_INPUT
;
276 dev
.start
= s
->start
;
283 stdio_register(&dev
);
290 * serial_assign() - Select the serial output device by name
291 * @name: Name of the serial driver to be used as default output
293 * This function configures the serial output multiplexing by
294 * selecting which serial device will be used as default. In case
295 * the STDIO "serial" device is selected as stdin/stdout/stderr,
296 * the serial device previously configured by this function will be
297 * used for the particular operation.
299 * Returns 0 on success, negative on error.
301 int serial_assign(const char *name
)
303 struct serial_device
*s
;
305 for (s
= serial_devices
; s
; s
= s
->next
) {
306 if (strcmp(s
->name
, name
))
316 * serial_reinit_all() - Reinitialize all compiled-in serial ports
318 * This function reinitializes all serial ports that are compiled
319 * into U-Boot by calling their serial_start() functions.
321 void serial_reinit_all(void)
323 struct serial_device
*s
;
325 for (s
= serial_devices
; s
; s
= s
->next
)
330 * get_current() - Return pointer to currently selected serial port
332 * This function returns a pointer to currently selected serial port.
333 * The currently selected serial port is altered by serial_assign()
336 * In case this function is called before relocation or before any serial
337 * port is configured, this function calls default_serial_console() to
338 * determine the serial port. Otherwise, the configured serial port is
341 * Returns pointer to the currently selected serial port on success,
344 static struct serial_device
*get_current(void)
346 struct serial_device
*dev
;
348 if (!(gd
->flags
& GD_FLG_RELOC
))
349 dev
= default_serial_console();
350 else if (!serial_current
)
351 dev
= default_serial_console();
353 dev
= serial_current
;
355 /* We must have a console device */
357 #ifdef CONFIG_SPL_BUILD
358 puts("Cannot find console\n");
361 panic("Cannot find console\n");
369 * serial_init() - Initialize currently selected serial port
371 * This function initializes the currently selected serial port. This
372 * usually involves setting up the registers of that particular port,
373 * enabling clock and such. This function uses the get_current() call
374 * to determine which port is selected.
376 * Returns 0 on success, negative on error.
378 int serial_init(void)
380 return get_current()->start();
384 * serial_setbrg() - Configure baud-rate of currently selected serial port
386 * This function configures the baud-rate of the currently selected
387 * serial port. The baud-rate is retrieved from global data within
388 * the serial port driver. This function uses the get_current() call
389 * to determine which port is selected.
391 * Returns 0 on success, negative on error.
393 void serial_setbrg(void)
395 get_current()->setbrg();
399 * serial_getc() - Read character from currently selected serial port
401 * This function retrieves a character from currently selected serial
402 * port. In case there is no character waiting on the serial port,
403 * this function will block and wait for the character to appear. This
404 * function uses the get_current() call to determine which port is
407 * Returns the character on success, negative on error.
409 int serial_getc(void)
411 return get_current()->getc();
415 * serial_tstc() - Test if data is available on currently selected serial port
417 * This function tests if one or more characters are available on
418 * currently selected serial port. This function never blocks. This
419 * function uses the get_current() call to determine which port is
422 * Returns positive if character is available, zero otherwise.
424 int serial_tstc(void)
426 return get_current()->tstc();
430 * serial_putc() - Output character via currently selected serial port
431 * @c: Single character to be output from the serial port.
433 * This function outputs a character via currently selected serial
434 * port. This character is passed to the serial port driver responsible
435 * for controlling the hardware. The hardware may still be in process
436 * of transmitting another character, therefore this function may block
437 * for a short amount of time. This function uses the get_current()
438 * call to determine which port is selected.
440 void serial_putc(const char c
)
442 get_current()->putc(c
);
446 * serial_puts() - Output string via currently selected serial port
447 * @s: Zero-terminated string to be output from the serial port.
449 * This function outputs a zero-terminated string via currently
450 * selected serial port. This function behaves as an accelerator
451 * in case the hardware can queue multiple characters for transfer.
452 * The whole string that is to be output is available to the function
453 * implementing the hardware manipulation. Transmitting the whole
454 * string may take some time, thus this function may block for some
455 * amount of time. This function uses the get_current() call to
456 * determine which port is selected.
458 void serial_puts(const char *s
)
460 get_current()->puts(s
);
464 * default_serial_puts() - Output string by calling serial_putc() in loop
465 * @s: Zero-terminated string to be output from the serial port.
467 * This function outputs a zero-terminated string by calling serial_putc()
468 * in a loop. Most drivers do not support queueing more than one byte for
469 * transfer, thus this function precisely implements their serial_puts().
471 * To optimize the number of get_current() calls, this function only
472 * calls get_current() once and then directly accesses the putc() call
473 * of the &struct serial_device .
475 void default_serial_puts(const char *s
)
477 struct serial_device
*dev
= get_current();
482 #if CONFIG_POST & CONFIG_SYS_POST_UART
483 static const int bauds
[] = CONFIG_SYS_BAUDRATE_TABLE
;
486 * uart_post_test() - Test the currently selected serial port using POST
487 * @flags: POST framework flags
489 * Do a loopback test of the currently selected serial port. This
490 * function is only useful in the context of the POST testing framwork.
491 * The serial port is firstly configured into loopback mode and then
492 * characters are sent through it.
494 * Returns 0 on success, value otherwise.
496 /* Mark weak until post/cpu/.../uart.c migrate over */
498 int uart_post_test(int flags
)
501 int ret
, saved_baud
, b
;
502 struct serial_device
*saved_dev
, *s
;
505 /* Save current serial state */
507 saved_dev
= serial_current
;
508 saved_baud
= bd
->bi_baudrate
;
510 for (s
= serial_devices
; s
; s
= s
->next
) {
511 /* If this driver doesn't support loop back, skip it */
515 /* Test the next device */
522 /* Consume anything that happens to be queued */
523 while (serial_tstc())
526 /* Enable loop back */
529 /* Test every available baud rate */
530 for (b
= 0; b
< ARRAY_SIZE(bauds
); ++b
) {
531 bd
->bi_baudrate
= bauds
[b
];
535 * Stick to printable chars to avoid issues:
536 * - terminal corruption
537 * - serial program reacting to sequences and sending
538 * back random extra data
539 * - most serial drivers add in extra chars (like \r\n)
541 for (c
= 0x20; c
< 0x7f; ++c
) {
545 /* Make sure it's the same one */
546 ret
= (c
!= serial_getc());
552 /* Clean up the output in case it was sent */
554 ret
= ('\b' != serial_getc());
562 /* Disable loop back */
565 /* XXX: There is no serial_stop() !? */
571 /* Restore previous serial state */
572 serial_current
= saved_dev
;
573 bd
->bi_baudrate
= saved_baud
;