2 * Copyright 1996 The Board of Trustees of The Leland Stanford
3 * Junior University. All Rights Reserved.
5 * Permission to use, copy, modify, and distribute this
6 * software and its documentation for any purpose and without
7 * fee is hereby granted, provided that the above copyright
8 * notice appear in all copies. Stanford University
9 * makes no representations about the suitability of this
10 * software for any purpose. It is provided "as is" without
11 * express or implied warranty.
13 * strip.c This module implements Starmode Radio IP (STRIP)
14 * for kernel-based devices like TTY. It interfaces between a
15 * raw TTY, and the kernel's INET protocol layers (via DDI).
17 * Version: @(#)strip.c 1.3 July 1997
19 * Author: Stuart Cheshire <cheshire@cs.stanford.edu>
21 * Fixes: v0.9 12th Feb 1996 (SC)
22 * New byte stuffing (2+6 run-length encoding)
23 * New watchdog timer task
24 * New Protocol key (SIP0)
26 * v0.9.1 3rd March 1996 (SC)
27 * Changed to dynamic device allocation -- no more compile
28 * time (or boot time) limit on the number of STRIP devices.
30 * v0.9.2 13th March 1996 (SC)
31 * Uses arp cache lookups (but doesn't send arp packets yet)
33 * v0.9.3 17th April 1996 (SC)
34 * Fixed bug where STR_ERROR flag was getting set unneccessarily
35 * (causing otherwise good packets to be unneccessarily dropped)
37 * v0.9.4 27th April 1996 (SC)
38 * First attempt at using "&COMMAND" Starmode AT commands
40 * v0.9.5 29th May 1996 (SC)
41 * First attempt at sending (unicast) ARP packets
43 * v0.9.6 5th June 1996 (Elliot)
44 * Put "message level" tags in every "printk" statement
46 * v0.9.7 13th June 1996 (laik)
47 * Added support for the /proc fs
49 * v0.9.8 July 1996 (Mema)
50 * Added packet logging
52 * v1.0 November 1996 (SC)
53 * Fixed (severe) memory leaks in the /proc fs code
54 * Fixed race conditions in the logging code
56 * v1.1 January 1997 (SC)
57 * Deleted packet logging (use tcpdump instead)
58 * Added support for Metricom Firmware v204 features
59 * (like message checksums)
61 * v1.2 January 1997 (SC)
62 * Put portables list back in
65 * Made STRIP driver set the radio's baud rate automatically.
66 * It is no longer necessarily to manually set the radio's
67 * rate permanently to 115200 -- the driver handles setting
68 * the rate automatically.
72 static const char StripVersion
[] = "1.3A-STUART.CHESHIRE-MODULAR";
74 static const char StripVersion
[] = "1.3A-STUART.CHESHIRE";
77 #define TICKLE_TIMERS 0
78 #define EXT_COUNTERS 1
81 /************************************************************************/
84 #include <linux/kernel.h>
85 #include <linux/module.h>
86 #include <linux/init.h>
87 #include <linux/bitops.h>
88 #include <asm/system.h>
89 #include <asm/uaccess.h>
91 # include <linux/ctype.h>
92 #include <linux/string.h>
94 #include <linux/interrupt.h>
96 #include <linux/tty.h>
97 #include <linux/errno.h>
98 #include <linux/netdevice.h>
99 #include <linux/inetdevice.h>
100 #include <linux/etherdevice.h>
101 #include <linux/skbuff.h>
102 #include <linux/if_arp.h>
103 #include <linux/if_strip.h>
104 #include <linux/proc_fs.h>
105 #include <linux/seq_file.h>
106 #include <linux/serial.h>
107 #include <linux/serialP.h>
108 #include <linux/rcupdate.h>
109 #include <linux/compat.h>
110 #include <linux/slab.h>
112 #include <net/net_namespace.h>
114 #include <linux/ip.h>
115 #include <linux/tcp.h>
116 #include <linux/time.h>
117 #include <linux/jiffies.h>
119 /************************************************************************/
120 /* Useful structures and definitions */
123 * A MetricomKey identifies the protocol being carried inside a Metricom
133 * An IP address can be viewed as four bytes in memory (which is what it is) or as
134 * a single 32-bit long (which is convenient for assignment, equality testing etc.)
143 * A MetricomAddressString is used to hold a printable representation of
144 * a Metricom address.
149 } MetricomAddressString
;
151 /* Encapsulation can expand packet of size x to 65/64x + 1
152 * Sent packet looks like "<CR>*<address>*<key><encaps payload><CR>"
154 * eg. <CR>*0000-1234*SIP0<encaps payload><CR>
155 * We allow 31 bytes for the stars, the key, the address and the <CR>s
157 #define STRIP_ENCAP_SIZE(X) (32 + (X)*65L/64L)
160 * A STRIP_Header is never really sent over the radio, but making a dummy
161 * header for internal use within the kernel that looks like an Ethernet
162 * header makes certain other software happier. For example, tcpdump
163 * already understands Ethernet headers.
167 MetricomAddress dst_addr
; /* Destination address, e.g. "0000-1234" */
168 MetricomAddress src_addr
; /* Source address, e.g. "0000-5678" */
169 unsigned short protocol
; /* The protocol type, using Ethernet codes */
176 #define NODE_TABLE_SIZE 32
178 struct timeval timestamp
;
180 MetricomNode node
[NODE_TABLE_SIZE
];
183 enum { FALSE
= 0, TRUE
= 1 };
186 * Holds the radio's firmware version.
193 * Holds the radio's serial number.
200 * Holds the radio's battery voltage.
211 NoStructure
= 0, /* Really old firmware */
212 StructuredMessages
= 1, /* Parsable AT response msgs */
213 ChecksummedMessages
= 2 /* Parsable AT response msgs with checksums */
219 * These are pointers to the malloc()ed frame buffers.
222 unsigned char *rx_buff
; /* buffer for received IP packet */
223 unsigned char *sx_buff
; /* buffer for received serial data */
224 int sx_count
; /* received serial data counter */
225 int sx_size
; /* Serial buffer size */
226 unsigned char *tx_buff
; /* transmitter buffer */
227 unsigned char *tx_head
; /* pointer to next byte to XMIT */
228 int tx_left
; /* bytes left in XMIT queue */
229 int tx_size
; /* Serial buffer size */
232 * STRIP interface statistics.
235 unsigned long rx_packets
; /* inbound frames counter */
236 unsigned long tx_packets
; /* outbound frames counter */
237 unsigned long rx_errors
; /* Parity, etc. errors */
238 unsigned long tx_errors
; /* Planned stuff */
239 unsigned long rx_dropped
; /* No memory for skb */
240 unsigned long tx_dropped
; /* When MTU change */
241 unsigned long rx_over_errors
; /* Frame bigger than STRIP buf. */
243 unsigned long pps_timer
; /* Timer to determine pps */
244 unsigned long rx_pps_count
; /* Counter to determine pps */
245 unsigned long tx_pps_count
; /* Counter to determine pps */
246 unsigned long sx_pps_count
; /* Counter to determine pps */
247 unsigned long rx_average_pps
; /* rx packets per second * 8 */
248 unsigned long tx_average_pps
; /* tx packets per second * 8 */
249 unsigned long sx_average_pps
; /* sent packets per second * 8 */
252 unsigned long rx_bytes
; /* total received bytes */
253 unsigned long tx_bytes
; /* total received bytes */
254 unsigned long rx_rbytes
; /* bytes thru radio i/f */
255 unsigned long tx_rbytes
; /* bytes thru radio i/f */
256 unsigned long rx_sbytes
; /* tot bytes thru serial i/f */
257 unsigned long tx_sbytes
; /* tot bytes thru serial i/f */
258 unsigned long rx_ebytes
; /* tot stat/err bytes */
259 unsigned long tx_ebytes
; /* tot stat/err bytes */
263 * Internal variables.
266 struct list_head list
; /* Linked list of devices */
268 int discard
; /* Set if serial error */
269 int working
; /* Is radio working correctly? */
270 int firmware_level
; /* Message structuring level */
271 int next_command
; /* Next periodic command */
272 unsigned int user_baud
; /* The user-selected baud rate */
273 int mtu
; /* Our mtu (to spot changes!) */
274 long watchdog_doprobe
; /* Next time to test the radio */
275 long watchdog_doreset
; /* Time to do next reset */
276 long gratuitous_arp
; /* Time to send next ARP refresh */
277 long arp_interval
; /* Next ARP interval */
278 struct timer_list idle_timer
; /* For periodic wakeup calls */
279 MetricomAddress true_dev_addr
; /* True address of radio */
280 int manual_dev_addr
; /* Hack: See note below */
282 FirmwareVersion firmware_version
; /* The radio's firmware version */
283 SerialNumber serial_number
; /* The radio's serial number */
284 BatteryVoltage battery_voltage
; /* The radio's battery voltage */
287 * Other useful structures.
290 struct tty_struct
*tty
; /* ptr to TTY structure */
291 struct net_device
*dev
; /* Our device structure */
294 * Neighbour radio records
297 MetricomNodeTable portables
;
298 MetricomNodeTable poletops
;
302 * Note: manual_dev_addr hack
304 * It is not possible to change the hardware address of a Metricom radio,
305 * or to send packets with a user-specified hardware source address, thus
306 * trying to manually set a hardware source address is a questionable
307 * thing to do. However, if the user *does* manually set the hardware
308 * source address of a STRIP interface, then the kernel will believe it,
309 * and use it in certain places. For example, the hardware address listed
310 * by ifconfig will be the manual address, not the true one.
311 * (Both addresses are listed in /proc/net/strip.)
312 * Also, ARP packets will be sent out giving the user-specified address as
313 * the source address, not the real address. This is dangerous, because
314 * it means you won't receive any replies -- the ARP replies will go to
315 * the specified address, which will be some other radio. The case where
316 * this is useful is when that other radio is also connected to the same
317 * machine. This allows you to connect a pair of radios to one machine,
318 * and to use one exclusively for inbound traffic, and the other
319 * exclusively for outbound traffic. Pretty neat, huh?
321 * Here's the full procedure to set this up:
323 * 1. "slattach" two interfaces, e.g. st0 for outgoing packets,
324 * and st1 for incoming packets
326 * 2. "ifconfig" st0 (outbound radio) to have the hardware address
327 * which is the real hardware address of st1 (inbound radio).
328 * Now when it sends out packets, it will masquerade as st1, and
329 * replies will be sent to that radio, which is exactly what we want.
331 * 3. Set the route table entry ("route add default ..." or
332 * "route add -net ...", as appropriate) to send packets via the st0
333 * interface (outbound radio). Do not add any route which sends packets
334 * out via the st1 interface -- that radio is for inbound traffic only.
336 * 4. "ifconfig" st1 (inbound radio) to have hardware address zero.
337 * This tells the STRIP driver to "shut down" that interface and not
338 * send any packets through it. In particular, it stops sending the
339 * periodic gratuitous ARP packets that a STRIP interface normally sends.
340 * Also, when packets arrive on that interface, it will search the
341 * interface list to see if there is another interface who's manual
342 * hardware address matches its own real address (i.e. st0 in this
343 * example) and if so it will transfer ownership of the skbuff to
344 * that interface, so that it looks to the kernel as if the packet
345 * arrived on that interface. This is necessary because when the
346 * kernel sends an ARP packet on st0, it expects to get a reply on
347 * st0, and if it sees the reply come from st1 then it will ignore
348 * it (to be accurate, it puts the entry in the ARP table, but
349 * labelled in such a way that st0 can't use it).
351 * Thanks to Petros Maniatis for coming up with the idea of splitting
352 * inbound and outbound traffic between two interfaces, which turned
353 * out to be really easy to implement, even if it is a bit of a hack.
355 * Having set a manual address on an interface, you can restore it
356 * to automatic operation (where the address is automatically kept
357 * consistent with the real address of the radio) by setting a manual
358 * address of all ones, e.g. "ifconfig st0 hw strip FFFFFFFFFFFF"
359 * This 'turns off' manual override mode for the device address.
361 * Note: The IEEE 802 headers reported in tcpdump will show the *real*
362 * radio addresses the packets were sent and received from, so that you
363 * can see what is really going on with packets, and which interfaces
364 * they are really going through.
368 /************************************************************************/
372 * CommandString1 works on all radios
373 * Other CommandStrings are only used with firmware that provides structured responses.
375 * ats319=1 Enables Info message for node additions and deletions
376 * ats319=2 Enables Info message for a new best node
377 * ats319=4 Enables checksums
378 * ats319=8 Enables ACK messages
381 static const int MaxCommandStringLength
= 32;
382 static const int CompatibilityCommand
= 1;
384 static const char CommandString0
[] = "*&COMMAND*ATS319=7"; /* Turn on checksums & info messages */
385 static const char CommandString1
[] = "*&COMMAND*ATS305?"; /* Query radio name */
386 static const char CommandString2
[] = "*&COMMAND*ATS325?"; /* Query battery voltage */
387 static const char CommandString3
[] = "*&COMMAND*ATS300?"; /* Query version information */
388 static const char CommandString4
[] = "*&COMMAND*ATS311?"; /* Query poletop list */
389 static const char CommandString5
[] = "*&COMMAND*AT~LA"; /* Query portables list */
395 static const StringDescriptor CommandString
[] = {
396 {CommandString0
, sizeof(CommandString0
) - 1},
397 {CommandString1
, sizeof(CommandString1
) - 1},
398 {CommandString2
, sizeof(CommandString2
) - 1},
399 {CommandString3
, sizeof(CommandString3
) - 1},
400 {CommandString4
, sizeof(CommandString4
) - 1},
401 {CommandString5
, sizeof(CommandString5
) - 1}
404 #define GOT_ALL_RADIO_INFO(S) \
405 ((S)->firmware_version.c[0] && \
406 (S)->battery_voltage.c[0] && \
407 memcmp(&(S)->true_dev_addr, zero_address.c, sizeof(zero_address)))
409 static const char hextable
[16] = "0123456789ABCDEF";
411 static const MetricomAddress zero_address
;
412 static const MetricomAddress broadcast_address
=
413 { {0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF} };
415 static const MetricomKey SIP0Key
= { "SIP0" };
416 static const MetricomKey ARP0Key
= { "ARP0" };
417 static const MetricomKey ATR_Key
= { "ATR " };
418 static const MetricomKey ACK_Key
= { "ACK_" };
419 static const MetricomKey INF_Key
= { "INF_" };
420 static const MetricomKey ERR_Key
= { "ERR_" };
422 static const long MaxARPInterval
= 60 * HZ
; /* One minute */
425 * Maximum Starmode packet length is 1183 bytes. Allowing 4 bytes for
426 * protocol key, 4 bytes for checksum, one byte for CR, and 65/64 expansion
427 * for STRIP encoding, that translates to a maximum payload MTU of 1155.
428 * Note: A standard NFS 1K data packet is a total of 0x480 (1152) bytes
429 * long, including IP header, UDP header, and NFS header. Setting the STRIP
430 * MTU to 1152 allows us to send default sized NFS packets without fragmentation.
432 static const unsigned short MAX_SEND_MTU
= 1152;
433 static const unsigned short MAX_RECV_MTU
= 1500; /* Hoping for Ethernet sized packets in the future! */
434 static const unsigned short DEFAULT_STRIP_MTU
= 1152;
435 static const int STRIP_MAGIC
= 0x5303;
436 static const long LongTime
= 0x7FFFFFFF;
438 /************************************************************************/
439 /* Global variables */
441 static LIST_HEAD(strip_list
);
442 static DEFINE_SPINLOCK(strip_lock
);
444 /************************************************************************/
447 /* Returns TRUE if text T begins with prefix P */
448 #define has_prefix(T,L,P) (((L) >= sizeof(P)-1) && !strncmp((T), (P), sizeof(P)-1))
450 /* Returns TRUE if text T of length L is equal to string S */
451 #define text_equal(T,L,S) (((L) == sizeof(S)-1) && !strncmp((T), (S), sizeof(S)-1))
453 #define READHEX(X) ((X)>='0' && (X)<='9' ? (X)-'0' : \
454 (X)>='a' && (X)<='f' ? (X)-'a'+10 : \
455 (X)>='A' && (X)<='F' ? (X)-'A'+10 : 0 )
457 #define READHEX16(X) ((__u16)(READHEX(X)))
459 #define READDEC(X) ((X)>='0' && (X)<='9' ? (X)-'0' : 0)
461 #define ARRAY_END(X) (&((X)[ARRAY_SIZE(X)]))
463 #define JIFFIE_TO_SEC(X) ((X) / HZ)
466 /************************************************************************/
467 /* Utility routines */
469 static int arp_query(unsigned char *haddr
, u32 paddr
,
470 struct net_device
*dev
)
472 struct neighbour
*neighbor_entry
;
475 neighbor_entry
= neigh_lookup(&arp_tbl
, &paddr
, dev
);
477 if (neighbor_entry
!= NULL
) {
478 neighbor_entry
->used
= jiffies
;
479 if (neighbor_entry
->nud_state
& NUD_VALID
) {
480 memcpy(haddr
, neighbor_entry
->ha
, dev
->addr_len
);
483 neigh_release(neighbor_entry
);
488 static void DumpData(char *msg
, struct strip
*strip_info
, __u8
* ptr
,
491 static const int MAX_DumpData
= 80;
492 __u8 pkt_text
[MAX_DumpData
], *p
= pkt_text
;
496 while (ptr
< end
&& p
< &pkt_text
[MAX_DumpData
- 4]) {
501 if (*ptr
>= 32 && *ptr
<= 126) {
504 sprintf(p
, "\\%02X", *ptr
);
515 printk(KERN_INFO
"%s: %-13s%s\n", strip_info
->dev
->name
, msg
, pkt_text
);
519 /************************************************************************/
520 /* Byte stuffing/unstuffing routines */
523 * 00 Unused (reserved character)
524 * 01-3F Run of 2-64 different characters
525 * 40-7F Run of 1-64 different characters plus a single zero at the end
526 * 80-BF Run of 1-64 of the same character
527 * C0-FF Run of 1-64 zeroes (ASCII 0)
532 Stuff_DiffZero
= 0x40,
535 Stuff_NoCode
= 0xFF, /* Special code, meaning no code selected */
537 Stuff_CodeMask
= 0xC0,
538 Stuff_CountMask
= 0x3F,
539 Stuff_MaxCount
= 0x3F,
540 Stuff_Magic
= 0x0D /* The value we are eliminating */
543 /* StuffData encodes the data starting at "src" for "length" bytes.
544 * It writes it to the buffer pointed to by "dst" (which must be at least
545 * as long as 1 + 65/64 of the input length). The output may be up to 1.6%
546 * larger than the input for pathological input, but will usually be smaller.
547 * StuffData returns the new value of the dst pointer as its result.
548 * "code_ptr_ptr" points to a "__u8 *" which is used to hold encoding state
549 * between calls, allowing an encoded packet to be incrementally built up
550 * from small parts. On the first call, the "__u8 *" pointed to should be
551 * initialized to NULL; between subsequent calls the calling routine should
552 * leave the value alone and simply pass it back unchanged so that the
553 * encoder can recover its current state.
556 #define StuffData_FinishBlock(X) \
557 (*code_ptr = (X) ^ Stuff_Magic, code = Stuff_NoCode)
559 static __u8
*StuffData(__u8
* src
, __u32 length
, __u8
* dst
,
560 __u8
** code_ptr_ptr
)
562 __u8
*end
= src
+ length
;
563 __u8
*code_ptr
= *code_ptr_ptr
;
564 __u8 code
= Stuff_NoCode
, count
= 0;
571 * Recover state from last call, if applicable
573 code
= (*code_ptr
^ Stuff_Magic
) & Stuff_CodeMask
;
574 count
= (*code_ptr
^ Stuff_Magic
) & Stuff_CountMask
;
579 /* Stuff_NoCode: If no current code, select one */
581 /* Record where we're going to put this code */
583 count
= 0; /* Reset the count (zero means one instance) */
584 /* Tentatively start a new block */
590 *dst
++ = *src
++ ^ Stuff_Magic
;
592 /* Note: We optimistically assume run of same -- */
593 /* which will be fixed later in Stuff_Same */
594 /* if it turns out not to be true. */
597 /* Stuff_Zero: We already have at least one zero encoded */
599 /* If another zero, count it, else finish this code block */
604 StuffData_FinishBlock(Stuff_Zero
+ count
);
608 /* Stuff_Same: We already have at least one byte encoded */
610 /* If another one the same, count it */
611 if ((*src
^ Stuff_Magic
) == code_ptr
[1]) {
616 /* else, this byte does not match this block. */
617 /* If we already have two or more bytes encoded, finish this code block */
619 StuffData_FinishBlock(Stuff_Same
+ count
);
622 /* else, we only have one so far, so switch to Stuff_Diff code */
624 /* and fall through to Stuff_Diff case below
625 * Note cunning cleverness here: case Stuff_Diff compares
626 * the current character with the previous two to see if it
627 * has a run of three the same. Won't this be an error if
628 * there aren't two previous characters stored to compare with?
629 * No. Because we know the current character is *not* the same
630 * as the previous one, the first test below will necessarily
631 * fail and the send half of the "if" won't be executed.
634 /* Stuff_Diff: We have at least two *different* bytes encoded */
636 /* If this is a zero, must encode a Stuff_DiffZero, and begin a new block */
638 StuffData_FinishBlock(Stuff_DiffZero
+
641 /* else, if we have three in a row, it is worth starting a Stuff_Same block */
642 else if ((*src
^ Stuff_Magic
) == dst
[-1]
643 && dst
[-1] == dst
[-2]) {
644 /* Back off the last two characters we encoded */
646 /* Note: "Stuff_Diff + 0" is an illegal code */
647 if (code
== Stuff_Diff
+ 0) {
648 code
= Stuff_Same
+ 0;
650 StuffData_FinishBlock(code
);
652 /* dst[-1] already holds the correct value */
653 count
= 2; /* 2 means three bytes encoded */
656 /* else, another different byte, so add it to the block */
658 *dst
++ = *src
^ Stuff_Magic
;
661 src
++; /* Consume the byte */
664 if (count
== Stuff_MaxCount
) {
665 StuffData_FinishBlock(code
+ count
);
668 if (code
== Stuff_NoCode
) {
669 *code_ptr_ptr
= NULL
;
671 *code_ptr_ptr
= code_ptr
;
672 StuffData_FinishBlock(code
+ count
);
678 * UnStuffData decodes the data at "src", up to (but not including) "end".
679 * It writes the decoded data into the buffer pointed to by "dst", up to a
680 * maximum of "dst_length", and returns the new value of "src" so that a
681 * follow-on call can read more data, continuing from where the first left off.
683 * There are three types of results:
684 * 1. The source data runs out before extracting "dst_length" bytes:
685 * UnStuffData returns NULL to indicate failure.
686 * 2. The source data produces exactly "dst_length" bytes:
687 * UnStuffData returns new_src = end to indicate that all bytes were consumed.
688 * 3. "dst_length" bytes are extracted, with more remaining.
689 * UnStuffData returns new_src < end to indicate that there are more bytes
692 * Note: The decoding may be destructive, in that it may alter the source
693 * data in the process of decoding it (this is necessary to allow a follow-on
694 * call to resume correctly).
697 static __u8
*UnStuffData(__u8
* src
, __u8
* end
, __u8
* dst
,
700 __u8
*dst_end
= dst
+ dst_length
;
702 if (!src
|| !end
|| !dst
|| !dst_length
)
704 while (src
< end
&& dst
< dst_end
) {
705 int count
= (*src
^ Stuff_Magic
) & Stuff_CountMask
;
706 switch ((*src
^ Stuff_Magic
) & Stuff_CodeMask
) {
708 if (src
+ 1 + count
>= end
)
711 *dst
++ = *++src
^ Stuff_Magic
;
713 while (--count
>= 0 && dst
< dst_end
);
718 *src
= Stuff_Same
^ Stuff_Magic
;
722 count
) ^ Stuff_Magic
;
726 if (src
+ 1 + count
>= end
)
729 *dst
++ = *++src
^ Stuff_Magic
;
731 while (--count
>= 0 && dst
< dst_end
);
733 *src
= Stuff_Zero
^ Stuff_Magic
;
736 (Stuff_DiffZero
+ count
) ^ Stuff_Magic
;
742 *dst
++ = src
[1] ^ Stuff_Magic
;
744 while (--count
>= 0 && dst
< dst_end
);
748 *src
= (Stuff_Same
+ count
) ^ Stuff_Magic
;
754 while (--count
>= 0 && dst
< dst_end
);
758 *src
= (Stuff_Zero
+ count
) ^ Stuff_Magic
;
769 /************************************************************************/
770 /* General routines for STRIP */
773 * set_baud sets the baud rate to the rate defined by baudcode
775 static void set_baud(struct tty_struct
*tty
, speed_t baudrate
)
777 struct ktermios old_termios
;
779 mutex_lock(&tty
->termios_mutex
);
780 old_termios
=*(tty
->termios
);
781 tty_encode_baud_rate(tty
, baudrate
, baudrate
);
782 tty
->ops
->set_termios(tty
, &old_termios
);
783 mutex_unlock(&tty
->termios_mutex
);
787 * Convert a string to a Metricom Address.
790 #define IS_RADIO_ADDRESS(p) ( \
791 isdigit((p)[0]) && isdigit((p)[1]) && isdigit((p)[2]) && isdigit((p)[3]) && \
793 isdigit((p)[5]) && isdigit((p)[6]) && isdigit((p)[7]) && isdigit((p)[8]) )
795 static int string_to_radio_address(MetricomAddress
* addr
, __u8
* p
)
797 if (!IS_RADIO_ADDRESS(p
))
801 addr
->c
[2] = READHEX(p
[0]) << 4 | READHEX(p
[1]);
802 addr
->c
[3] = READHEX(p
[2]) << 4 | READHEX(p
[3]);
803 addr
->c
[4] = READHEX(p
[5]) << 4 | READHEX(p
[6]);
804 addr
->c
[5] = READHEX(p
[7]) << 4 | READHEX(p
[8]);
809 * Convert a Metricom Address to a string.
812 static __u8
*radio_address_to_string(const MetricomAddress
* addr
,
813 MetricomAddressString
* p
)
815 sprintf(p
->c
, "%02X%02X-%02X%02X", addr
->c
[2], addr
->c
[3],
816 addr
->c
[4], addr
->c
[5]);
821 * Note: Must make sure sx_size is big enough to receive a stuffed
822 * MAX_RECV_MTU packet. Additionally, we also want to ensure that it's
823 * big enough to receive a large radio neighbour list (currently 4K).
826 static int allocate_buffers(struct strip
*strip_info
, int mtu
)
828 struct net_device
*dev
= strip_info
->dev
;
829 int sx_size
= max_t(int, STRIP_ENCAP_SIZE(MAX_RECV_MTU
), 4096);
830 int tx_size
= STRIP_ENCAP_SIZE(mtu
) + MaxCommandStringLength
;
831 __u8
*r
= kmalloc(MAX_RECV_MTU
, GFP_ATOMIC
);
832 __u8
*s
= kmalloc(sx_size
, GFP_ATOMIC
);
833 __u8
*t
= kmalloc(tx_size
, GFP_ATOMIC
);
835 strip_info
->rx_buff
= r
;
836 strip_info
->sx_buff
= s
;
837 strip_info
->tx_buff
= t
;
838 strip_info
->sx_size
= sx_size
;
839 strip_info
->tx_size
= tx_size
;
840 strip_info
->mtu
= dev
->mtu
= mtu
;
850 * MTU has been changed by the IP layer.
852 * an upcall from the tty driver, or in an ip packet queue.
854 static int strip_change_mtu(struct net_device
*dev
, int new_mtu
)
856 struct strip
*strip_info
= netdev_priv(dev
);
857 int old_mtu
= strip_info
->mtu
;
858 unsigned char *orbuff
= strip_info
->rx_buff
;
859 unsigned char *osbuff
= strip_info
->sx_buff
;
860 unsigned char *otbuff
= strip_info
->tx_buff
;
862 if (new_mtu
> MAX_SEND_MTU
) {
864 "%s: MTU exceeds maximum allowable (%d), MTU change cancelled.\n",
865 strip_info
->dev
->name
, MAX_SEND_MTU
);
869 spin_lock_bh(&strip_lock
);
870 if (!allocate_buffers(strip_info
, new_mtu
)) {
871 printk(KERN_ERR
"%s: unable to grow strip buffers, MTU change cancelled.\n",
872 strip_info
->dev
->name
);
873 spin_unlock_bh(&strip_lock
);
877 if (strip_info
->sx_count
) {
878 if (strip_info
->sx_count
<= strip_info
->sx_size
)
879 memcpy(strip_info
->sx_buff
, osbuff
,
880 strip_info
->sx_count
);
882 strip_info
->discard
= strip_info
->sx_count
;
883 strip_info
->rx_over_errors
++;
887 if (strip_info
->tx_left
) {
888 if (strip_info
->tx_left
<= strip_info
->tx_size
)
889 memcpy(strip_info
->tx_buff
, strip_info
->tx_head
,
890 strip_info
->tx_left
);
892 strip_info
->tx_left
= 0;
893 strip_info
->tx_dropped
++;
896 strip_info
->tx_head
= strip_info
->tx_buff
;
897 spin_unlock_bh(&strip_lock
);
899 printk(KERN_NOTICE
"%s: strip MTU changed fom %d to %d.\n",
900 strip_info
->dev
->name
, old_mtu
, strip_info
->mtu
);
908 static void strip_unlock(struct strip
*strip_info
)
911 * Set the timer to go off in one second.
913 strip_info
->idle_timer
.expires
= jiffies
+ 1 * HZ
;
914 add_timer(&strip_info
->idle_timer
);
915 netif_wake_queue(strip_info
->dev
);
921 * If the time is in the near future, time_delta prints the number of
922 * seconds to go into the buffer and returns the address of the buffer.
923 * If the time is not in the near future, it returns the address of the
924 * string "Not scheduled" The buffer must be long enough to contain the
925 * ascii representation of the number plus 9 charactes for the " seconds"
926 * and the null character.
928 #ifdef CONFIG_PROC_FS
929 static char *time_delta(char buffer
[], long time
)
932 if (time
> LongTime
/ 2)
933 return ("Not scheduled");
935 time
= 0; /* Don't print negative times */
936 sprintf(buffer
, "%ld seconds", time
/ HZ
);
940 /* get Nth element of the linked list */
941 static struct strip
*strip_get_idx(loff_t pos
)
946 list_for_each_entry_rcu(str
, &strip_list
, list
) {
954 static void *strip_seq_start(struct seq_file
*seq
, loff_t
*pos
)
958 return *pos
? strip_get_idx(*pos
- 1) : SEQ_START_TOKEN
;
961 static void *strip_seq_next(struct seq_file
*seq
, void *v
, loff_t
*pos
)
967 if (v
== SEQ_START_TOKEN
)
968 return strip_get_idx(1);
972 list_for_each_continue_rcu(l
, &strip_list
) {
973 return list_entry(l
, struct strip
, list
);
978 static void strip_seq_stop(struct seq_file
*seq
, void *v
)
984 static void strip_seq_neighbours(struct seq_file
*seq
,
985 const MetricomNodeTable
* table
,
988 /* We wrap this in a do/while loop, so if the table changes */
989 /* while we're reading it, we just go around and try again. */
994 t
= table
->timestamp
;
995 if (table
->num_nodes
)
996 seq_printf(seq
, "\n %s\n", title
);
997 for (i
= 0; i
< table
->num_nodes
; i
++) {
1000 spin_lock_bh(&strip_lock
);
1001 node
= table
->node
[i
];
1002 spin_unlock_bh(&strip_lock
);
1003 seq_printf(seq
, " %s\n", node
.c
);
1005 } while (table
->timestamp
.tv_sec
!= t
.tv_sec
1006 || table
->timestamp
.tv_usec
!= t
.tv_usec
);
1010 * This function prints radio status information via the seq_file
1011 * interface. The interface takes care of buffer size and over
1014 * The buffer in seq_file is PAGESIZE (4K)
1015 * so this routine should never print more or it will get truncated.
1016 * With the maximum of 32 portables and 32 poletops
1017 * reported, the routine outputs 3107 bytes into the buffer.
1019 static void strip_seq_status_info(struct seq_file
*seq
,
1020 const struct strip
*strip_info
)
1023 MetricomAddressString addr_string
;
1025 /* First, we must copy all of our data to a safe place, */
1026 /* in case a serial interrupt comes in and changes it. */
1027 int tx_left
= strip_info
->tx_left
;
1028 unsigned long rx_average_pps
= strip_info
->rx_average_pps
;
1029 unsigned long tx_average_pps
= strip_info
->tx_average_pps
;
1030 unsigned long sx_average_pps
= strip_info
->sx_average_pps
;
1031 int working
= strip_info
->working
;
1032 int firmware_level
= strip_info
->firmware_level
;
1033 long watchdog_doprobe
= strip_info
->watchdog_doprobe
;
1034 long watchdog_doreset
= strip_info
->watchdog_doreset
;
1035 long gratuitous_arp
= strip_info
->gratuitous_arp
;
1036 long arp_interval
= strip_info
->arp_interval
;
1037 FirmwareVersion firmware_version
= strip_info
->firmware_version
;
1038 SerialNumber serial_number
= strip_info
->serial_number
;
1039 BatteryVoltage battery_voltage
= strip_info
->battery_voltage
;
1040 char *if_name
= strip_info
->dev
->name
;
1041 MetricomAddress true_dev_addr
= strip_info
->true_dev_addr
;
1042 MetricomAddress dev_dev_addr
=
1043 *(MetricomAddress
*) strip_info
->dev
->dev_addr
;
1044 int manual_dev_addr
= strip_info
->manual_dev_addr
;
1046 unsigned long rx_bytes
= strip_info
->rx_bytes
;
1047 unsigned long tx_bytes
= strip_info
->tx_bytes
;
1048 unsigned long rx_rbytes
= strip_info
->rx_rbytes
;
1049 unsigned long tx_rbytes
= strip_info
->tx_rbytes
;
1050 unsigned long rx_sbytes
= strip_info
->rx_sbytes
;
1051 unsigned long tx_sbytes
= strip_info
->tx_sbytes
;
1052 unsigned long rx_ebytes
= strip_info
->rx_ebytes
;
1053 unsigned long tx_ebytes
= strip_info
->tx_ebytes
;
1056 seq_printf(seq
, "\nInterface name\t\t%s\n", if_name
);
1057 seq_printf(seq
, " Radio working:\t\t%s\n", working
? "Yes" : "No");
1058 radio_address_to_string(&true_dev_addr
, &addr_string
);
1059 seq_printf(seq
, " Radio address:\t\t%s\n", addr_string
.c
);
1060 if (manual_dev_addr
) {
1061 radio_address_to_string(&dev_dev_addr
, &addr_string
);
1062 seq_printf(seq
, " Device address:\t%s\n", addr_string
.c
);
1064 seq_printf(seq
, " Firmware version:\t%s", !working
? "Unknown" :
1065 !firmware_level
? "Should be upgraded" :
1066 firmware_version
.c
);
1067 if (firmware_level
>= ChecksummedMessages
)
1068 seq_printf(seq
, " (Checksums Enabled)");
1069 seq_printf(seq
, "\n");
1070 seq_printf(seq
, " Serial number:\t\t%s\n", serial_number
.c
);
1071 seq_printf(seq
, " Battery voltage:\t%s\n", battery_voltage
.c
);
1072 seq_printf(seq
, " Transmit queue (bytes):%d\n", tx_left
);
1073 seq_printf(seq
, " Receive packet rate: %ld packets per second\n",
1074 rx_average_pps
/ 8);
1075 seq_printf(seq
, " Transmit packet rate: %ld packets per second\n",
1076 tx_average_pps
/ 8);
1077 seq_printf(seq
, " Sent packet rate: %ld packets per second\n",
1078 sx_average_pps
/ 8);
1079 seq_printf(seq
, " Next watchdog probe:\t%s\n",
1080 time_delta(temp
, watchdog_doprobe
));
1081 seq_printf(seq
, " Next watchdog reset:\t%s\n",
1082 time_delta(temp
, watchdog_doreset
));
1083 seq_printf(seq
, " Next gratuitous ARP:\t");
1086 (strip_info
->dev
->dev_addr
, zero_address
.c
,
1087 sizeof(zero_address
)))
1088 seq_printf(seq
, "Disabled\n");
1090 seq_printf(seq
, "%s\n", time_delta(temp
, gratuitous_arp
));
1091 seq_printf(seq
, " Next ARP interval:\t%ld seconds\n",
1092 JIFFIE_TO_SEC(arp_interval
));
1097 seq_printf(seq
, "\n");
1099 " Total bytes: \trx:\t%lu\ttx:\t%lu\n",
1100 rx_bytes
, tx_bytes
);
1102 " thru radio: \trx:\t%lu\ttx:\t%lu\n",
1103 rx_rbytes
, tx_rbytes
);
1105 " thru serial port: \trx:\t%lu\ttx:\t%lu\n",
1106 rx_sbytes
, tx_sbytes
);
1108 " Total stat/err bytes:\trx:\t%lu\ttx:\t%lu\n",
1109 rx_ebytes
, tx_ebytes
);
1111 strip_seq_neighbours(seq
, &strip_info
->poletops
,
1113 strip_seq_neighbours(seq
, &strip_info
->portables
,
1119 * This function is exports status information from the STRIP driver through
1120 * the /proc file system.
1122 static int strip_seq_show(struct seq_file
*seq
, void *v
)
1124 if (v
== SEQ_START_TOKEN
)
1125 seq_printf(seq
, "strip_version: %s\n", StripVersion
);
1127 strip_seq_status_info(seq
, (const struct strip
*)v
);
1132 static const struct seq_operations strip_seq_ops
= {
1133 .start
= strip_seq_start
,
1134 .next
= strip_seq_next
,
1135 .stop
= strip_seq_stop
,
1136 .show
= strip_seq_show
,
1139 static int strip_seq_open(struct inode
*inode
, struct file
*file
)
1141 return seq_open(file
, &strip_seq_ops
);
1144 static const struct file_operations strip_seq_fops
= {
1145 .owner
= THIS_MODULE
,
1146 .open
= strip_seq_open
,
1148 .llseek
= seq_lseek
,
1149 .release
= seq_release
,
1155 /************************************************************************/
1156 /* Sending routines */
1158 static void ResetRadio(struct strip
*strip_info
)
1160 struct tty_struct
*tty
= strip_info
->tty
;
1161 static const char init
[] = "ate0q1dt**starmode\r**";
1162 StringDescriptor s
= { init
, sizeof(init
) - 1 };
1165 * If the radio isn't working anymore,
1166 * we should clear the old status information.
1168 if (strip_info
->working
) {
1169 printk(KERN_INFO
"%s: No response: Resetting radio.\n",
1170 strip_info
->dev
->name
);
1171 strip_info
->firmware_version
.c
[0] = '\0';
1172 strip_info
->serial_number
.c
[0] = '\0';
1173 strip_info
->battery_voltage
.c
[0] = '\0';
1174 strip_info
->portables
.num_nodes
= 0;
1175 do_gettimeofday(&strip_info
->portables
.timestamp
);
1176 strip_info
->poletops
.num_nodes
= 0;
1177 do_gettimeofday(&strip_info
->poletops
.timestamp
);
1180 strip_info
->pps_timer
= jiffies
;
1181 strip_info
->rx_pps_count
= 0;
1182 strip_info
->tx_pps_count
= 0;
1183 strip_info
->sx_pps_count
= 0;
1184 strip_info
->rx_average_pps
= 0;
1185 strip_info
->tx_average_pps
= 0;
1186 strip_info
->sx_average_pps
= 0;
1188 /* Mark radio address as unknown */
1189 *(MetricomAddress
*) & strip_info
->true_dev_addr
= zero_address
;
1190 if (!strip_info
->manual_dev_addr
)
1191 *(MetricomAddress
*) strip_info
->dev
->dev_addr
=
1193 strip_info
->working
= FALSE
;
1194 strip_info
->firmware_level
= NoStructure
;
1195 strip_info
->next_command
= CompatibilityCommand
;
1196 strip_info
->watchdog_doprobe
= jiffies
+ 10 * HZ
;
1197 strip_info
->watchdog_doreset
= jiffies
+ 1 * HZ
;
1199 /* If the user has selected a baud rate above 38.4 see what magic we have to do */
1200 if (strip_info
->user_baud
> 38400) {
1202 * Subtle stuff: Pay attention :-)
1203 * If the serial port is currently at the user's selected (>38.4) rate,
1204 * then we temporarily switch to 19.2 and issue the ATS304 command
1205 * to tell the radio to switch to the user's selected rate.
1206 * If the serial port is not currently at that rate, that means we just
1207 * issued the ATS304 command last time through, so this time we restore
1208 * the user's selected rate and issue the normal starmode reset string.
1210 if (strip_info
->user_baud
== tty_get_baud_rate(tty
)) {
1211 static const char b0
[] = "ate0q1s304=57600\r";
1212 static const char b1
[] = "ate0q1s304=115200\r";
1213 static const StringDescriptor baudstring
[2] =
1214 { {b0
, sizeof(b0
) - 1}
1215 , {b1
, sizeof(b1
) - 1}
1217 set_baud(tty
, 19200);
1218 if (strip_info
->user_baud
== 57600)
1220 else if (strip_info
->user_baud
== 115200)
1223 s
= baudstring
[1]; /* For now */
1225 set_baud(tty
, strip_info
->user_baud
);
1228 tty
->ops
->write(tty
, s
.string
, s
.length
);
1230 strip_info
->tx_ebytes
+= s
.length
;
1235 * Called by the driver when there's room for more data. If we have
1236 * more packets to send, we send them here.
1239 static void strip_write_some_more(struct tty_struct
*tty
)
1241 struct strip
*strip_info
= tty
->disc_data
;
1243 /* First make sure we're connected. */
1244 if (!strip_info
|| strip_info
->magic
!= STRIP_MAGIC
||
1245 !netif_running(strip_info
->dev
))
1248 if (strip_info
->tx_left
> 0) {
1250 tty
->ops
->write(tty
, strip_info
->tx_head
,
1251 strip_info
->tx_left
);
1252 strip_info
->tx_left
-= num_written
;
1253 strip_info
->tx_head
+= num_written
;
1255 strip_info
->tx_sbytes
+= num_written
;
1257 } else { /* Else start transmission of another packet */
1259 clear_bit(TTY_DO_WRITE_WAKEUP
, &tty
->flags
);
1260 strip_unlock(strip_info
);
1264 static __u8
*add_checksum(__u8
* buffer
, __u8
* end
)
1270 end
[3] = hextable
[sum
& 0xF];
1272 end
[2] = hextable
[sum
& 0xF];
1274 end
[1] = hextable
[sum
& 0xF];
1276 end
[0] = hextable
[sum
& 0xF];
1280 static unsigned char *strip_make_packet(unsigned char *buffer
,
1281 struct strip
*strip_info
,
1282 struct sk_buff
*skb
)
1285 __u8
*stuffstate
= NULL
;
1286 STRIP_Header
*header
= (STRIP_Header
*) skb
->data
;
1287 MetricomAddress haddr
= header
->dst_addr
;
1288 int len
= skb
->len
- sizeof(STRIP_Header
);
1291 /*HexDump("strip_make_packet", strip_info, skb->data, skb->data + skb->len); */
1293 if (header
->protocol
== htons(ETH_P_IP
))
1295 else if (header
->protocol
== htons(ETH_P_ARP
))
1299 "%s: strip_make_packet: Unknown packet type 0x%04X\n",
1300 strip_info
->dev
->name
, ntohs(header
->protocol
));
1304 if (len
> strip_info
->mtu
) {
1306 "%s: Dropping oversized transmit packet: %d bytes\n",
1307 strip_info
->dev
->name
, len
);
1312 * If we're sending to ourselves, discard the packet.
1313 * (Metricom radios choke if they try to send a packet to their own address.)
1315 if (!memcmp(haddr
.c
, strip_info
->true_dev_addr
.c
, sizeof(haddr
))) {
1316 printk(KERN_ERR
"%s: Dropping packet addressed to self\n",
1317 strip_info
->dev
->name
);
1322 * If this is a broadcast packet, send it to our designated Metricom
1323 * 'broadcast hub' radio (First byte of address being 0xFF means broadcast)
1325 if (haddr
.c
[0] == 0xFF) {
1327 struct in_device
*in_dev
;
1330 in_dev
= __in_dev_get_rcu(strip_info
->dev
);
1331 if (in_dev
== NULL
) {
1335 if (in_dev
->ifa_list
)
1336 brd
= in_dev
->ifa_list
->ifa_broadcast
;
1339 /* arp_query returns 1 if it succeeds in looking up the address, 0 if it fails */
1340 if (!arp_query(haddr
.c
, brd
, strip_info
->dev
)) {
1342 "%s: Unable to send packet (no broadcast hub configured)\n",
1343 strip_info
->dev
->name
);
1347 * If we are the broadcast hub, don't bother sending to ourselves.
1348 * (Metricom radios choke if they try to send a packet to their own address.)
1351 (haddr
.c
, strip_info
->true_dev_addr
.c
, sizeof(haddr
)))
1357 *ptr
++ = hextable
[haddr
.c
[2] >> 4];
1358 *ptr
++ = hextable
[haddr
.c
[2] & 0xF];
1359 *ptr
++ = hextable
[haddr
.c
[3] >> 4];
1360 *ptr
++ = hextable
[haddr
.c
[3] & 0xF];
1362 *ptr
++ = hextable
[haddr
.c
[4] >> 4];
1363 *ptr
++ = hextable
[haddr
.c
[4] & 0xF];
1364 *ptr
++ = hextable
[haddr
.c
[5] >> 4];
1365 *ptr
++ = hextable
[haddr
.c
[5] & 0xF];
1373 StuffData(skb
->data
+ sizeof(STRIP_Header
), len
, ptr
,
1376 if (strip_info
->firmware_level
>= ChecksummedMessages
)
1377 ptr
= add_checksum(buffer
+ 1, ptr
);
1383 static void strip_send(struct strip
*strip_info
, struct sk_buff
*skb
)
1385 MetricomAddress haddr
;
1386 unsigned char *ptr
= strip_info
->tx_buff
;
1387 int doreset
= (long) jiffies
- strip_info
->watchdog_doreset
>= 0;
1388 int doprobe
= (long) jiffies
- strip_info
->watchdog_doprobe
>= 0
1393 * 1. If we have a packet, encapsulate it and put it in the buffer
1396 char *newptr
= strip_make_packet(ptr
, strip_info
, skb
);
1397 strip_info
->tx_pps_count
++;
1399 strip_info
->tx_dropped
++;
1402 strip_info
->sx_pps_count
++;
1403 strip_info
->tx_packets
++; /* Count another successful packet */
1405 strip_info
->tx_bytes
+= skb
->len
;
1406 strip_info
->tx_rbytes
+= ptr
- strip_info
->tx_buff
;
1408 /*DumpData("Sending:", strip_info, strip_info->tx_buff, ptr); */
1409 /*HexDump("Sending", strip_info, strip_info->tx_buff, ptr); */
1414 * 2. If it is time for another tickle, tack it on, after the packet
1417 StringDescriptor ts
= CommandString
[strip_info
->next_command
];
1421 do_gettimeofday(&tv
);
1422 printk(KERN_INFO
"**** Sending tickle string %d at %02d.%06d\n",
1423 strip_info
->next_command
, tv
.tv_sec
% 100,
1427 if (ptr
== strip_info
->tx_buff
)
1430 *ptr
++ = '*'; /* First send "**" to provoke an error message */
1433 /* Then add the command */
1434 memcpy(ptr
, ts
.string
, ts
.length
);
1436 /* Add a checksum ? */
1437 if (strip_info
->firmware_level
< ChecksummedMessages
)
1440 ptr
= add_checksum(ptr
, ptr
+ ts
.length
);
1442 *ptr
++ = 0x0D; /* Terminate the command with a <CR> */
1444 /* Cycle to next periodic command? */
1445 if (strip_info
->firmware_level
>= StructuredMessages
)
1446 if (++strip_info
->next_command
>=
1447 ARRAY_SIZE(CommandString
))
1448 strip_info
->next_command
= 0;
1450 strip_info
->tx_ebytes
+= ts
.length
;
1452 strip_info
->watchdog_doprobe
= jiffies
+ 10 * HZ
;
1453 strip_info
->watchdog_doreset
= jiffies
+ 1 * HZ
;
1454 /*printk(KERN_INFO "%s: Routine radio test.\n", strip_info->dev->name); */
1458 * 3. Set up the strip_info ready to send the data (if any).
1460 strip_info
->tx_head
= strip_info
->tx_buff
;
1461 strip_info
->tx_left
= ptr
- strip_info
->tx_buff
;
1462 set_bit(TTY_DO_WRITE_WAKEUP
, &strip_info
->tty
->flags
);
1464 * 4. Debugging check to make sure we're not overflowing the buffer.
1466 if (strip_info
->tx_size
- strip_info
->tx_left
< 20)
1467 printk(KERN_ERR
"%s: Sending%5d bytes;%5d bytes free.\n",
1468 strip_info
->dev
->name
, strip_info
->tx_left
,
1469 strip_info
->tx_size
- strip_info
->tx_left
);
1472 * 5. If watchdog has expired, reset the radio. Note: if there's data waiting in
1473 * the buffer, strip_write_some_more will send it after the reset has finished
1476 ResetRadio(strip_info
);
1481 struct in_device
*in_dev
;
1485 in_dev
= __in_dev_get_rcu(strip_info
->dev
);
1487 if (in_dev
->ifa_list
) {
1488 brd
= in_dev
->ifa_list
->ifa_broadcast
;
1489 addr
= in_dev
->ifa_list
->ifa_local
;
1497 * 6. If it is time for a periodic ARP, queue one up to be sent.
1498 * We only do this if:
1499 * 1. The radio is working
1500 * 2. It's time to send another periodic ARP
1501 * 3. We really know what our address is (and it is not manually set to zero)
1502 * 4. We have a designated broadcast address configured
1503 * If we queue up an ARP packet when we don't have a designated broadcast
1504 * address configured, then the packet will just have to be discarded in
1505 * strip_make_packet. This is not fatal, but it causes misleading information
1506 * to be displayed in tcpdump. tcpdump will report that periodic APRs are
1507 * being sent, when in fact they are not, because they are all being dropped
1508 * in the strip_make_packet routine.
1510 if (strip_info
->working
1511 && (long) jiffies
- strip_info
->gratuitous_arp
>= 0
1512 && memcmp(strip_info
->dev
->dev_addr
, zero_address
.c
,
1513 sizeof(zero_address
))
1514 && arp_query(haddr
.c
, brd
, strip_info
->dev
)) {
1515 /*printk(KERN_INFO "%s: Sending gratuitous ARP with interval %ld\n",
1516 strip_info->dev->name, strip_info->arp_interval / HZ); */
1517 strip_info
->gratuitous_arp
=
1518 jiffies
+ strip_info
->arp_interval
;
1519 strip_info
->arp_interval
*= 2;
1520 if (strip_info
->arp_interval
> MaxARPInterval
)
1521 strip_info
->arp_interval
= MaxARPInterval
;
1523 arp_send(ARPOP_REPLY
, ETH_P_ARP
, addr
, /* Target address of ARP packet is our address */
1524 strip_info
->dev
, /* Device to send packet on */
1525 addr
, /* Source IP address this ARP packet comes from */
1526 NULL
, /* Destination HW address is NULL (broadcast it) */
1527 strip_info
->dev
->dev_addr
, /* Source HW address is our HW address */
1528 strip_info
->dev
->dev_addr
); /* Target HW address is our HW address (redundant) */
1532 * 7. All ready. Start the transmission
1534 strip_write_some_more(strip_info
->tty
);
1537 /* Encapsulate a datagram and kick it into a TTY queue. */
1538 static netdev_tx_t
strip_xmit(struct sk_buff
*skb
, struct net_device
*dev
)
1540 struct strip
*strip_info
= netdev_priv(dev
);
1542 if (!netif_running(dev
)) {
1543 printk(KERN_ERR
"%s: xmit call when iface is down\n",
1545 return NETDEV_TX_BUSY
;
1548 netif_stop_queue(dev
);
1550 del_timer(&strip_info
->idle_timer
);
1553 if (time_after(jiffies
, strip_info
->pps_timer
+ HZ
)) {
1554 unsigned long t
= jiffies
- strip_info
->pps_timer
;
1555 unsigned long rx_pps_count
=
1556 DIV_ROUND_CLOSEST(strip_info
->rx_pps_count
*HZ
*8, t
);
1557 unsigned long tx_pps_count
=
1558 DIV_ROUND_CLOSEST(strip_info
->tx_pps_count
*HZ
*8, t
);
1559 unsigned long sx_pps_count
=
1560 DIV_ROUND_CLOSEST(strip_info
->sx_pps_count
*HZ
*8, t
);
1562 strip_info
->pps_timer
= jiffies
;
1563 strip_info
->rx_pps_count
= 0;
1564 strip_info
->tx_pps_count
= 0;
1565 strip_info
->sx_pps_count
= 0;
1567 strip_info
->rx_average_pps
= (strip_info
->rx_average_pps
+ rx_pps_count
+ 1) / 2;
1568 strip_info
->tx_average_pps
= (strip_info
->tx_average_pps
+ tx_pps_count
+ 1) / 2;
1569 strip_info
->sx_average_pps
= (strip_info
->sx_average_pps
+ sx_pps_count
+ 1) / 2;
1571 if (rx_pps_count
/ 8 >= 10)
1572 printk(KERN_INFO
"%s: WARNING: Receiving %ld packets per second.\n",
1573 strip_info
->dev
->name
, rx_pps_count
/ 8);
1574 if (tx_pps_count
/ 8 >= 10)
1575 printk(KERN_INFO
"%s: WARNING: Tx %ld packets per second.\n",
1576 strip_info
->dev
->name
, tx_pps_count
/ 8);
1577 if (sx_pps_count
/ 8 >= 10)
1578 printk(KERN_INFO
"%s: WARNING: Sending %ld packets per second.\n",
1579 strip_info
->dev
->name
, sx_pps_count
/ 8);
1582 spin_lock_bh(&strip_lock
);
1584 strip_send(strip_info
, skb
);
1586 spin_unlock_bh(&strip_lock
);
1590 return NETDEV_TX_OK
;
1594 * IdleTask periodically calls strip_xmit, so even when we have no IP packets
1595 * to send for an extended period of time, the watchdog processing still gets
1596 * done to ensure that the radio stays in Starmode
1599 static void strip_IdleTask(unsigned long parameter
)
1601 strip_xmit(NULL
, (struct net_device
*) parameter
);
1605 * Create the MAC header for an arbitrary protocol layer
1607 * saddr!=NULL means use this specific address (n/a for Metricom)
1608 * saddr==NULL means use default device source address
1609 * daddr!=NULL means use this destination address
1610 * daddr==NULL means leave destination address alone
1611 * (e.g. unresolved arp -- kernel will call
1612 * rebuild_header later to fill in the address)
1615 static int strip_header(struct sk_buff
*skb
, struct net_device
*dev
,
1616 unsigned short type
, const void *daddr
,
1617 const void *saddr
, unsigned len
)
1619 struct strip
*strip_info
= netdev_priv(dev
);
1620 STRIP_Header
*header
= (STRIP_Header
*) skb_push(skb
, sizeof(STRIP_Header
));
1622 /*printk(KERN_INFO "%s: strip_header 0x%04X %s\n", dev->name, type,
1623 type == ETH_P_IP ? "IP" : type == ETH_P_ARP ? "ARP" : ""); */
1625 header
->src_addr
= strip_info
->true_dev_addr
;
1626 header
->protocol
= htons(type
);
1628 /*HexDump("strip_header", netdev_priv(dev), skb->data, skb->data + skb->len); */
1631 return (-dev
->hard_header_len
);
1633 header
->dst_addr
= *(MetricomAddress
*) daddr
;
1634 return (dev
->hard_header_len
);
1638 * Rebuild the MAC header. This is called after an ARP
1639 * (or in future other address resolution) has completed on this
1640 * sk_buff. We now let ARP fill in the other fields.
1641 * I think this should return zero if packet is ready to send,
1642 * or non-zero if it needs more time to do an address lookup
1645 static int strip_rebuild_header(struct sk_buff
*skb
)
1648 STRIP_Header
*header
= (STRIP_Header
*) skb
->data
;
1650 /* Arp find returns zero if if knows the address, */
1651 /* or if it doesn't know the address it sends an ARP packet and returns non-zero */
1652 return arp_find(header
->dst_addr
.c
, skb
) ? 1 : 0;
1659 /************************************************************************/
1660 /* Receiving routines */
1663 * This function parses the response to the ATS300? command,
1664 * extracting the radio version and serial number.
1666 static void get_radio_version(struct strip
*strip_info
, __u8
* ptr
, __u8
* end
)
1668 __u8
*p
, *value_begin
, *value_end
;
1671 /* Determine the beginning of the second line of the payload */
1673 while (p
< end
&& *p
!= 10)
1680 /* Determine the end of line */
1681 while (p
< end
&& *p
!= 10)
1688 len
= value_end
- value_begin
;
1689 len
= min_t(int, len
, sizeof(FirmwareVersion
) - 1);
1690 if (strip_info
->firmware_version
.c
[0] == 0)
1691 printk(KERN_INFO
"%s: Radio Firmware: %.*s\n",
1692 strip_info
->dev
->name
, len
, value_begin
);
1693 sprintf(strip_info
->firmware_version
.c
, "%.*s", len
, value_begin
);
1695 /* Look for the first colon */
1696 while (p
< end
&& *p
!= ':')
1700 /* Skip over the space */
1702 len
= sizeof(SerialNumber
) - 1;
1703 if (p
+ len
<= end
) {
1704 sprintf(strip_info
->serial_number
.c
, "%.*s", len
, p
);
1707 "STRIP: radio serial number shorter (%zd) than expected (%d)\n",
1713 * This function parses the response to the ATS325? command,
1714 * extracting the radio battery voltage.
1716 static void get_radio_voltage(struct strip
*strip_info
, __u8
* ptr
, __u8
* end
)
1720 len
= sizeof(BatteryVoltage
) - 1;
1721 if (ptr
+ len
<= end
) {
1722 sprintf(strip_info
->battery_voltage
.c
, "%.*s", len
, ptr
);
1725 "STRIP: radio voltage string shorter (%zd) than expected (%d)\n",
1731 * This function parses the responses to the AT~LA and ATS311 commands,
1732 * which list the radio's neighbours.
1734 static void get_radio_neighbours(MetricomNodeTable
* table
, __u8
* ptr
, __u8
* end
)
1736 table
->num_nodes
= 0;
1737 while (ptr
< end
&& table
->num_nodes
< NODE_TABLE_SIZE
) {
1738 MetricomNode
*node
= &table
->node
[table
->num_nodes
++];
1739 char *dst
= node
->c
, *limit
= dst
+ sizeof(*node
) - 1;
1740 while (ptr
< end
&& *ptr
<= 32)
1742 while (ptr
< end
&& dst
< limit
&& *ptr
!= 10)
1745 while (ptr
< end
&& ptr
[-1] != 10)
1748 do_gettimeofday(&table
->timestamp
);
1751 static int get_radio_address(struct strip
*strip_info
, __u8
* p
)
1753 MetricomAddress addr
;
1755 if (string_to_radio_address(&addr
, p
))
1758 /* See if our radio address has changed */
1759 if (memcmp(strip_info
->true_dev_addr
.c
, addr
.c
, sizeof(addr
))) {
1760 MetricomAddressString addr_string
;
1761 radio_address_to_string(&addr
, &addr_string
);
1762 printk(KERN_INFO
"%s: Radio address = %s\n",
1763 strip_info
->dev
->name
, addr_string
.c
);
1764 strip_info
->true_dev_addr
= addr
;
1765 if (!strip_info
->manual_dev_addr
)
1766 *(MetricomAddress
*) strip_info
->dev
->dev_addr
=
1768 /* Give the radio a few seconds to get its head straight, then send an arp */
1769 strip_info
->gratuitous_arp
= jiffies
+ 15 * HZ
;
1770 strip_info
->arp_interval
= 1 * HZ
;
1775 static int verify_checksum(struct strip
*strip_info
)
1777 __u8
*p
= strip_info
->sx_buff
;
1778 __u8
*end
= strip_info
->sx_buff
+ strip_info
->sx_count
- 4;
1780 (READHEX16(end
[0]) << 12) | (READHEX16(end
[1]) << 8) |
1781 (READHEX16(end
[2]) << 4) | (READHEX16(end
[3]));
1784 if (sum
== 0 && strip_info
->firmware_level
== StructuredMessages
) {
1785 strip_info
->firmware_level
= ChecksummedMessages
;
1786 printk(KERN_INFO
"%s: Radio provides message checksums\n",
1787 strip_info
->dev
->name
);
1792 static void RecvErr(char *msg
, struct strip
*strip_info
)
1794 __u8
*ptr
= strip_info
->sx_buff
;
1795 __u8
*end
= strip_info
->sx_buff
+ strip_info
->sx_count
;
1796 DumpData(msg
, strip_info
, ptr
, end
);
1797 strip_info
->rx_errors
++;
1800 static void RecvErr_Message(struct strip
*strip_info
, __u8
* sendername
,
1801 const __u8
* msg
, u_long len
)
1803 if (has_prefix(msg
, len
, "001")) { /* Not in StarMode! */
1804 RecvErr("Error Msg:", strip_info
);
1805 printk(KERN_INFO
"%s: Radio %s is not in StarMode\n",
1806 strip_info
->dev
->name
, sendername
);
1809 else if (has_prefix(msg
, len
, "002")) { /* Remap handle */
1810 /* We ignore "Remap handle" messages for now */
1813 else if (has_prefix(msg
, len
, "003")) { /* Can't resolve name */
1814 RecvErr("Error Msg:", strip_info
);
1815 printk(KERN_INFO
"%s: Destination radio name is unknown\n",
1816 strip_info
->dev
->name
);
1819 else if (has_prefix(msg
, len
, "004")) { /* Name too small or missing */
1820 strip_info
->watchdog_doreset
= jiffies
+ LongTime
;
1824 do_gettimeofday(&tv
);
1826 "**** Got ERR_004 response at %02d.%06d\n",
1827 tv
.tv_sec
% 100, tv
.tv_usec
);
1830 if (!strip_info
->working
) {
1831 strip_info
->working
= TRUE
;
1832 printk(KERN_INFO
"%s: Radio now in starmode\n",
1833 strip_info
->dev
->name
);
1835 * If the radio has just entered a working state, we should do our first
1836 * probe ASAP, so that we find out our radio address etc. without delay.
1838 strip_info
->watchdog_doprobe
= jiffies
;
1840 if (strip_info
->firmware_level
== NoStructure
&& sendername
) {
1841 strip_info
->firmware_level
= StructuredMessages
;
1842 strip_info
->next_command
= 0; /* Try to enable checksums ASAP */
1844 "%s: Radio provides structured messages\n",
1845 strip_info
->dev
->name
);
1847 if (strip_info
->firmware_level
>= StructuredMessages
) {
1849 * If this message has a valid checksum on the end, then the call to verify_checksum
1850 * will elevate the firmware_level to ChecksummedMessages for us. (The actual return
1851 * code from verify_checksum is ignored here.)
1853 verify_checksum(strip_info
);
1855 * If the radio has structured messages but we don't yet have all our information about it,
1856 * we should do probes without delay, until we have gathered all the information
1858 if (!GOT_ALL_RADIO_INFO(strip_info
))
1859 strip_info
->watchdog_doprobe
= jiffies
;
1863 else if (has_prefix(msg
, len
, "005")) /* Bad count specification */
1864 RecvErr("Error Msg:", strip_info
);
1866 else if (has_prefix(msg
, len
, "006")) /* Header too big */
1867 RecvErr("Error Msg:", strip_info
);
1869 else if (has_prefix(msg
, len
, "007")) { /* Body too big */
1870 RecvErr("Error Msg:", strip_info
);
1872 "%s: Error! Packet size too big for radio.\n",
1873 strip_info
->dev
->name
);
1876 else if (has_prefix(msg
, len
, "008")) { /* Bad character in name */
1877 RecvErr("Error Msg:", strip_info
);
1879 "%s: Radio name contains illegal character\n",
1880 strip_info
->dev
->name
);
1883 else if (has_prefix(msg
, len
, "009")) /* No count or line terminator */
1884 RecvErr("Error Msg:", strip_info
);
1886 else if (has_prefix(msg
, len
, "010")) /* Invalid checksum */
1887 RecvErr("Error Msg:", strip_info
);
1889 else if (has_prefix(msg
, len
, "011")) /* Checksum didn't match */
1890 RecvErr("Error Msg:", strip_info
);
1892 else if (has_prefix(msg
, len
, "012")) /* Failed to transmit packet */
1893 RecvErr("Error Msg:", strip_info
);
1896 RecvErr("Error Msg:", strip_info
);
1899 static void process_AT_response(struct strip
*strip_info
, __u8
* ptr
,
1904 while (p
< end
&& p
[-1] != 10)
1905 p
++; /* Skip past first newline character */
1906 /* Now ptr points to the AT command, and p points to the text of the response. */
1912 do_gettimeofday(&tv
);
1913 printk(KERN_INFO
"**** Got AT response %.7s at %02d.%06d\n",
1914 ptr
, tv
.tv_sec
% 100, tv
.tv_usec
);
1918 if (has_prefix(ptr
, len
, "ATS300?"))
1919 get_radio_version(strip_info
, p
, end
);
1920 else if (has_prefix(ptr
, len
, "ATS305?"))
1921 get_radio_address(strip_info
, p
);
1922 else if (has_prefix(ptr
, len
, "ATS311?"))
1923 get_radio_neighbours(&strip_info
->poletops
, p
, end
);
1924 else if (has_prefix(ptr
, len
, "ATS319=7"))
1925 verify_checksum(strip_info
);
1926 else if (has_prefix(ptr
, len
, "ATS325?"))
1927 get_radio_voltage(strip_info
, p
, end
);
1928 else if (has_prefix(ptr
, len
, "AT~LA"))
1929 get_radio_neighbours(&strip_info
->portables
, p
, end
);
1931 RecvErr("Unknown AT Response:", strip_info
);
1934 static void process_ACK(struct strip
*strip_info
, __u8
* ptr
, __u8
* end
)
1936 /* Currently we don't do anything with ACKs from the radio */
1939 static void process_Info(struct strip
*strip_info
, __u8
* ptr
, __u8
* end
)
1942 RecvErr("Bad Info Msg:", strip_info
);
1945 static struct net_device
*get_strip_dev(struct strip
*strip_info
)
1947 /* If our hardware address is *manually set* to zero, and we know our */
1948 /* real radio hardware address, try to find another strip device that has been */
1949 /* manually set to that address that we can 'transfer ownership' of this packet to */
1950 if (strip_info
->manual_dev_addr
&&
1951 !memcmp(strip_info
->dev
->dev_addr
, zero_address
.c
,
1952 sizeof(zero_address
))
1953 && memcmp(&strip_info
->true_dev_addr
, zero_address
.c
,
1954 sizeof(zero_address
))) {
1955 struct net_device
*dev
;
1956 read_lock_bh(&dev_base_lock
);
1957 for_each_netdev(&init_net
, dev
) {
1958 if (dev
->type
== strip_info
->dev
->type
&&
1959 !memcmp(dev
->dev_addr
,
1960 &strip_info
->true_dev_addr
,
1961 sizeof(MetricomAddress
))) {
1963 "%s: Transferred packet ownership to %s.\n",
1964 strip_info
->dev
->name
, dev
->name
);
1965 read_unlock_bh(&dev_base_lock
);
1969 read_unlock_bh(&dev_base_lock
);
1971 return (strip_info
->dev
);
1975 * Send one completely decapsulated datagram to the next layer.
1978 static void deliver_packet(struct strip
*strip_info
, STRIP_Header
* header
,
1981 struct sk_buff
*skb
= dev_alloc_skb(sizeof(STRIP_Header
) + packetlen
);
1983 printk(KERN_ERR
"%s: memory squeeze, dropping packet.\n",
1984 strip_info
->dev
->name
);
1985 strip_info
->rx_dropped
++;
1987 memcpy(skb_put(skb
, sizeof(STRIP_Header
)), header
,
1988 sizeof(STRIP_Header
));
1989 memcpy(skb_put(skb
, packetlen
), strip_info
->rx_buff
,
1991 skb
->dev
= get_strip_dev(strip_info
);
1992 skb
->protocol
= header
->protocol
;
1993 skb_reset_mac_header(skb
);
1995 /* Having put a fake header on the front of the sk_buff for the */
1996 /* benefit of tools like tcpdump, skb_pull now 'consumes' that */
1997 /* fake header before we hand the packet up to the next layer. */
1998 skb_pull(skb
, sizeof(STRIP_Header
));
2000 /* Finally, hand the packet up to the next layer (e.g. IP or ARP, etc.) */
2001 strip_info
->rx_packets
++;
2002 strip_info
->rx_pps_count
++;
2004 strip_info
->rx_bytes
+= packetlen
;
2010 static void process_IP_packet(struct strip
*strip_info
,
2011 STRIP_Header
* header
, __u8
* ptr
,
2016 /* Decode start of the IP packet header */
2017 ptr
= UnStuffData(ptr
, end
, strip_info
->rx_buff
, 4);
2019 RecvErr("IP Packet too short", strip_info
);
2023 packetlen
= ((__u16
) strip_info
->rx_buff
[2] << 8) | strip_info
->rx_buff
[3];
2025 if (packetlen
> MAX_RECV_MTU
) {
2026 printk(KERN_INFO
"%s: Dropping oversized received IP packet: %d bytes\n",
2027 strip_info
->dev
->name
, packetlen
);
2028 strip_info
->rx_dropped
++;
2032 /*printk(KERN_INFO "%s: Got %d byte IP packet\n", strip_info->dev->name, packetlen); */
2034 /* Decode remainder of the IP packet */
2036 UnStuffData(ptr
, end
, strip_info
->rx_buff
+ 4, packetlen
- 4);
2038 RecvErr("IP Packet too short", strip_info
);
2043 RecvErr("IP Packet too long", strip_info
);
2047 header
->protocol
= htons(ETH_P_IP
);
2049 deliver_packet(strip_info
, header
, packetlen
);
2052 static void process_ARP_packet(struct strip
*strip_info
,
2053 STRIP_Header
* header
, __u8
* ptr
,
2057 struct arphdr
*arphdr
= (struct arphdr
*) strip_info
->rx_buff
;
2059 /* Decode start of the ARP packet */
2060 ptr
= UnStuffData(ptr
, end
, strip_info
->rx_buff
, 8);
2062 RecvErr("ARP Packet too short", strip_info
);
2066 packetlen
= 8 + (arphdr
->ar_hln
+ arphdr
->ar_pln
) * 2;
2068 if (packetlen
> MAX_RECV_MTU
) {
2070 "%s: Dropping oversized received ARP packet: %d bytes\n",
2071 strip_info
->dev
->name
, packetlen
);
2072 strip_info
->rx_dropped
++;
2076 /*printk(KERN_INFO "%s: Got %d byte ARP %s\n",
2077 strip_info->dev->name, packetlen,
2078 ntohs(arphdr->ar_op) == ARPOP_REQUEST ? "request" : "reply"); */
2080 /* Decode remainder of the ARP packet */
2082 UnStuffData(ptr
, end
, strip_info
->rx_buff
+ 8, packetlen
- 8);
2084 RecvErr("ARP Packet too short", strip_info
);
2089 RecvErr("ARP Packet too long", strip_info
);
2093 header
->protocol
= htons(ETH_P_ARP
);
2095 deliver_packet(strip_info
, header
, packetlen
);
2099 * process_text_message processes a <CR>-terminated block of data received
2100 * from the radio that doesn't begin with a '*' character. All normal
2101 * Starmode communication messages with the radio begin with a '*',
2102 * so any text that does not indicates a serial port error, a radio that
2103 * is in Hayes command mode instead of Starmode, or a radio with really
2104 * old firmware that doesn't frame its Starmode responses properly.
2106 static void process_text_message(struct strip
*strip_info
)
2108 __u8
*msg
= strip_info
->sx_buff
;
2109 int len
= strip_info
->sx_count
;
2111 /* Check for anything that looks like it might be our radio name */
2112 /* (This is here for backwards compatibility with old firmware) */
2113 if (len
== 9 && get_radio_address(strip_info
, msg
) == 0)
2116 if (text_equal(msg
, len
, "OK"))
2117 return; /* Ignore 'OK' responses from prior commands */
2118 if (text_equal(msg
, len
, "ERROR"))
2119 return; /* Ignore 'ERROR' messages */
2120 if (has_prefix(msg
, len
, "ate0q1"))
2121 return; /* Ignore character echo back from the radio */
2123 /* Catch other error messages */
2124 /* (This is here for backwards compatibility with old firmware) */
2125 if (has_prefix(msg
, len
, "ERR_")) {
2126 RecvErr_Message(strip_info
, NULL
, &msg
[4], len
- 4);
2130 RecvErr("No initial *", strip_info
);
2134 * process_message processes a <CR>-terminated block of data received
2135 * from the radio. If the radio is not in Starmode or has old firmware,
2136 * it may be a line of text in response to an AT command. Ideally, with
2137 * a current radio that's properly in Starmode, all data received should
2138 * be properly framed and checksummed radio message blocks, containing
2139 * either a starmode packet, or a other communication from the radio
2140 * firmware, like "INF_" Info messages and &COMMAND responses.
2142 static void process_message(struct strip
*strip_info
)
2144 STRIP_Header header
= { zero_address
, zero_address
, 0 };
2145 __u8
*ptr
= strip_info
->sx_buff
;
2146 __u8
*end
= strip_info
->sx_buff
+ strip_info
->sx_count
;
2147 __u8 sendername
[32], *sptr
= sendername
;
2150 /*HexDump("Receiving", strip_info, ptr, end); */
2152 /* Check for start of address marker, and then skip over it */
2156 process_text_message(strip_info
);
2160 /* Copy out the return address */
2161 while (ptr
< end
&& *ptr
!= '*'
2162 && sptr
< ARRAY_END(sendername
) - 1)
2164 *sptr
= 0; /* Null terminate the sender name */
2166 /* Check for end of address marker, and skip over it */
2167 if (ptr
>= end
|| *ptr
!= '*') {
2168 RecvErr("No second *", strip_info
);
2171 ptr
++; /* Skip the second '*' */
2173 /* If the sender name is "&COMMAND", ignore this 'packet' */
2174 /* (This is here for backwards compatibility with old firmware) */
2175 if (!strcmp(sendername
, "&COMMAND")) {
2176 strip_info
->firmware_level
= NoStructure
;
2177 strip_info
->next_command
= CompatibilityCommand
;
2181 if (ptr
+ 4 > end
) {
2182 RecvErr("No proto key", strip_info
);
2186 /* Get the protocol key out of the buffer */
2192 /* If we're using checksums, verify the checksum at the end of the packet */
2193 if (strip_info
->firmware_level
>= ChecksummedMessages
) {
2194 end
-= 4; /* Chop the last four bytes off the packet (they're the checksum) */
2196 RecvErr("Missing Checksum", strip_info
);
2199 if (!verify_checksum(strip_info
)) {
2200 RecvErr("Bad Checksum", strip_info
);
2205 /*printk(KERN_INFO "%s: Got packet from \"%s\".\n", strip_info->dev->name, sendername); */
2208 * Fill in (pseudo) source and destination addresses in the packet.
2209 * We assume that the destination address was our address (the radio does not
2210 * tell us this). If the radio supplies a source address, then we use it.
2212 header
.dst_addr
= strip_info
->true_dev_addr
;
2213 string_to_radio_address(&header
.src_addr
, sendername
);
2216 if (key
.l
== SIP0Key
.l
) {
2217 strip_info
->rx_rbytes
+= (end
- ptr
);
2218 process_IP_packet(strip_info
, &header
, ptr
, end
);
2219 } else if (key
.l
== ARP0Key
.l
) {
2220 strip_info
->rx_rbytes
+= (end
- ptr
);
2221 process_ARP_packet(strip_info
, &header
, ptr
, end
);
2222 } else if (key
.l
== ATR_Key
.l
) {
2223 strip_info
->rx_ebytes
+= (end
- ptr
);
2224 process_AT_response(strip_info
, ptr
, end
);
2225 } else if (key
.l
== ACK_Key
.l
) {
2226 strip_info
->rx_ebytes
+= (end
- ptr
);
2227 process_ACK(strip_info
, ptr
, end
);
2228 } else if (key
.l
== INF_Key
.l
) {
2229 strip_info
->rx_ebytes
+= (end
- ptr
);
2230 process_Info(strip_info
, ptr
, end
);
2231 } else if (key
.l
== ERR_Key
.l
) {
2232 strip_info
->rx_ebytes
+= (end
- ptr
);
2233 RecvErr_Message(strip_info
, sendername
, ptr
, end
- ptr
);
2235 RecvErr("Unrecognized protocol key", strip_info
);
2237 if (key
.l
== SIP0Key
.l
)
2238 process_IP_packet(strip_info
, &header
, ptr
, end
);
2239 else if (key
.l
== ARP0Key
.l
)
2240 process_ARP_packet(strip_info
, &header
, ptr
, end
);
2241 else if (key
.l
== ATR_Key
.l
)
2242 process_AT_response(strip_info
, ptr
, end
);
2243 else if (key
.l
== ACK_Key
.l
)
2244 process_ACK(strip_info
, ptr
, end
);
2245 else if (key
.l
== INF_Key
.l
)
2246 process_Info(strip_info
, ptr
, end
);
2247 else if (key
.l
== ERR_Key
.l
)
2248 RecvErr_Message(strip_info
, sendername
, ptr
, end
- ptr
);
2250 RecvErr("Unrecognized protocol key", strip_info
);
2254 #define TTYERROR(X) ((X) == TTY_BREAK ? "Break" : \
2255 (X) == TTY_FRAME ? "Framing Error" : \
2256 (X) == TTY_PARITY ? "Parity Error" : \
2257 (X) == TTY_OVERRUN ? "Hardware Overrun" : "Unknown Error")
2260 * Handle the 'receiver data ready' interrupt.
2261 * This function is called by the 'tty_io' module in the kernel when
2262 * a block of STRIP data has been received, which can now be decapsulated
2263 * and sent on to some IP layer for further processing.
2266 static void strip_receive_buf(struct tty_struct
*tty
, const unsigned char *cp
,
2267 char *fp
, int count
)
2269 struct strip
*strip_info
= tty
->disc_data
;
2270 const unsigned char *end
= cp
+ count
;
2272 if (!strip_info
|| strip_info
->magic
!= STRIP_MAGIC
2273 || !netif_running(strip_info
->dev
))
2276 spin_lock_bh(&strip_lock
);
2280 do_gettimeofday(&tv
);
2282 "**** strip_receive_buf: %3d bytes at %02d.%06d\n",
2283 count
, tv
.tv_sec
% 100, tv
.tv_usec
);
2288 strip_info
->rx_sbytes
+= count
;
2291 /* Read the characters out of the buffer */
2294 printk(KERN_INFO
"%s: %s on serial port\n",
2295 strip_info
->dev
->name
, TTYERROR(*fp
));
2296 if (fp
&& *fp
++ && !strip_info
->discard
) { /* If there's a serial error, record it */
2297 /* If we have some characters in the buffer, discard them */
2298 strip_info
->discard
= strip_info
->sx_count
;
2299 strip_info
->rx_errors
++;
2302 /* Leading control characters (CR, NL, Tab, etc.) are ignored */
2303 if (strip_info
->sx_count
> 0 || *cp
>= ' ') {
2304 if (*cp
== 0x0D) { /* If end of packet, decide what to do with it */
2305 if (strip_info
->sx_count
> 3000)
2307 "%s: Cut a %d byte packet (%zd bytes remaining)%s\n",
2308 strip_info
->dev
->name
,
2309 strip_info
->sx_count
,
2312 discard
? " (discarded)" :
2314 if (strip_info
->sx_count
>
2315 strip_info
->sx_size
) {
2316 strip_info
->rx_over_errors
++;
2318 "%s: sx_buff overflow (%d bytes total)\n",
2319 strip_info
->dev
->name
,
2320 strip_info
->sx_count
);
2321 } else if (strip_info
->discard
)
2323 "%s: Discarding bad packet (%d/%d)\n",
2324 strip_info
->dev
->name
,
2325 strip_info
->discard
,
2326 strip_info
->sx_count
);
2328 process_message(strip_info
);
2329 strip_info
->discard
= 0;
2330 strip_info
->sx_count
= 0;
2332 /* Make sure we have space in the buffer */
2333 if (strip_info
->sx_count
<
2334 strip_info
->sx_size
)
2335 strip_info
->sx_buff
[strip_info
->
2338 strip_info
->sx_count
++;
2343 spin_unlock_bh(&strip_lock
);
2347 /************************************************************************/
2348 /* General control routines */
2350 static int set_mac_address(struct strip
*strip_info
,
2351 MetricomAddress
* addr
)
2354 * We're using a manually specified address if the address is set
2355 * to anything other than all ones. Setting the address to all ones
2356 * disables manual mode and goes back to automatic address determination
2357 * (tracking the true address that the radio has).
2359 strip_info
->manual_dev_addr
=
2360 memcmp(addr
->c
, broadcast_address
.c
,
2361 sizeof(broadcast_address
));
2362 if (strip_info
->manual_dev_addr
)
2363 *(MetricomAddress
*) strip_info
->dev
->dev_addr
= *addr
;
2365 *(MetricomAddress
*) strip_info
->dev
->dev_addr
=
2366 strip_info
->true_dev_addr
;
2370 static int strip_set_mac_address(struct net_device
*dev
, void *addr
)
2372 struct strip
*strip_info
= netdev_priv(dev
);
2373 struct sockaddr
*sa
= addr
;
2374 printk(KERN_INFO
"%s: strip_set_dev_mac_address called\n", dev
->name
);
2375 set_mac_address(strip_info
, (MetricomAddress
*) sa
->sa_data
);
2379 static struct net_device_stats
*strip_get_stats(struct net_device
*dev
)
2381 struct strip
*strip_info
= netdev_priv(dev
);
2382 static struct net_device_stats stats
;
2384 memset(&stats
, 0, sizeof(struct net_device_stats
));
2386 stats
.rx_packets
= strip_info
->rx_packets
;
2387 stats
.tx_packets
= strip_info
->tx_packets
;
2388 stats
.rx_dropped
= strip_info
->rx_dropped
;
2389 stats
.tx_dropped
= strip_info
->tx_dropped
;
2390 stats
.tx_errors
= strip_info
->tx_errors
;
2391 stats
.rx_errors
= strip_info
->rx_errors
;
2392 stats
.rx_over_errors
= strip_info
->rx_over_errors
;
2397 /************************************************************************/
2398 /* Opening and closing */
2401 * Here's the order things happen:
2402 * When the user runs "slattach -p strip ..."
2403 * 1. The TTY module calls strip_open;;
2404 * 2. strip_open calls strip_alloc
2405 * 3. strip_alloc calls register_netdev
2406 * 4. register_netdev calls strip_dev_init
2407 * 5. then strip_open finishes setting up the strip_info
2409 * When the user runs "ifconfig st<x> up address netmask ..."
2410 * 6. strip_open_low gets called
2412 * When the user runs "ifconfig st<x> down"
2413 * 7. strip_close_low gets called
2415 * When the user kills the slattach process
2416 * 8. strip_close gets called
2417 * 9. strip_close calls dev_close
2418 * 10. if the device is still up, then dev_close calls strip_close_low
2419 * 11. strip_close calls strip_free
2422 /* Open the low-level part of the STRIP channel. Easy! */
2424 static int strip_open_low(struct net_device
*dev
)
2426 struct strip
*strip_info
= netdev_priv(dev
);
2428 if (strip_info
->tty
== NULL
)
2431 if (!allocate_buffers(strip_info
, dev
->mtu
))
2434 strip_info
->sx_count
= 0;
2435 strip_info
->tx_left
= 0;
2437 strip_info
->discard
= 0;
2438 strip_info
->working
= FALSE
;
2439 strip_info
->firmware_level
= NoStructure
;
2440 strip_info
->next_command
= CompatibilityCommand
;
2441 strip_info
->user_baud
= tty_get_baud_rate(strip_info
->tty
);
2443 printk(KERN_INFO
"%s: Initializing Radio.\n",
2444 strip_info
->dev
->name
);
2445 ResetRadio(strip_info
);
2446 strip_info
->idle_timer
.expires
= jiffies
+ 1 * HZ
;
2447 add_timer(&strip_info
->idle_timer
);
2448 netif_wake_queue(dev
);
2454 * Close the low-level part of the STRIP channel. Easy!
2457 static int strip_close_low(struct net_device
*dev
)
2459 struct strip
*strip_info
= netdev_priv(dev
);
2461 if (strip_info
->tty
== NULL
)
2463 clear_bit(TTY_DO_WRITE_WAKEUP
, &strip_info
->tty
->flags
);
2464 netif_stop_queue(dev
);
2467 * Free all STRIP frame buffers.
2469 kfree(strip_info
->rx_buff
);
2470 strip_info
->rx_buff
= NULL
;
2471 kfree(strip_info
->sx_buff
);
2472 strip_info
->sx_buff
= NULL
;
2473 kfree(strip_info
->tx_buff
);
2474 strip_info
->tx_buff
= NULL
;
2476 del_timer(&strip_info
->idle_timer
);
2480 static const struct header_ops strip_header_ops
= {
2481 .create
= strip_header
,
2482 .rebuild
= strip_rebuild_header
,
2486 static const struct net_device_ops strip_netdev_ops
= {
2487 .ndo_open
= strip_open_low
,
2488 .ndo_stop
= strip_close_low
,
2489 .ndo_start_xmit
= strip_xmit
,
2490 .ndo_set_mac_address
= strip_set_mac_address
,
2491 .ndo_get_stats
= strip_get_stats
,
2492 .ndo_change_mtu
= strip_change_mtu
,
2496 * This routine is called by DDI when the
2497 * (dynamically assigned) device is registered
2500 static void strip_dev_setup(struct net_device
*dev
)
2503 * Finish setting up the DEVICE info.
2506 dev
->trans_start
= 0;
2507 dev
->tx_queue_len
= 30; /* Drop after 30 frames queued */
2510 dev
->mtu
= DEFAULT_STRIP_MTU
;
2511 dev
->type
= ARPHRD_METRICOM
; /* dtang */
2512 dev
->hard_header_len
= sizeof(STRIP_Header
);
2514 * netdev_priv(dev) Already holds a pointer to our struct strip
2517 *(MetricomAddress
*)dev
->broadcast
= broadcast_address
;
2518 dev
->dev_addr
[0] = 0;
2519 dev
->addr_len
= sizeof(MetricomAddress
);
2521 dev
->header_ops
= &strip_header_ops
,
2522 dev
->netdev_ops
= &strip_netdev_ops
;
2526 * Free a STRIP channel.
2529 static void strip_free(struct strip
*strip_info
)
2531 spin_lock_bh(&strip_lock
);
2532 list_del_rcu(&strip_info
->list
);
2533 spin_unlock_bh(&strip_lock
);
2535 strip_info
->magic
= 0;
2537 free_netdev(strip_info
->dev
);
2542 * Allocate a new free STRIP channel
2544 static struct strip
*strip_alloc(void)
2546 struct list_head
*n
;
2547 struct net_device
*dev
;
2548 struct strip
*strip_info
;
2550 dev
= alloc_netdev(sizeof(struct strip
), "st%d",
2554 return NULL
; /* If no more memory, return */
2557 strip_info
= netdev_priv(dev
);
2558 strip_info
->dev
= dev
;
2560 strip_info
->magic
= STRIP_MAGIC
;
2561 strip_info
->tty
= NULL
;
2563 strip_info
->gratuitous_arp
= jiffies
+ LongTime
;
2564 strip_info
->arp_interval
= 0;
2565 init_timer(&strip_info
->idle_timer
);
2566 strip_info
->idle_timer
.data
= (long) dev
;
2567 strip_info
->idle_timer
.function
= strip_IdleTask
;
2570 spin_lock_bh(&strip_lock
);
2573 * Search the list to find where to put our new entry
2574 * (and in the process decide what channel number it is
2577 list_for_each(n
, &strip_list
) {
2578 struct strip
*s
= hlist_entry(n
, struct strip
, list
);
2580 if (s
->dev
->base_addr
== dev
->base_addr
) {
2586 sprintf(dev
->name
, "st%ld", dev
->base_addr
);
2588 list_add_tail_rcu(&strip_info
->list
, &strip_list
);
2589 spin_unlock_bh(&strip_lock
);
2595 * Open the high-level part of the STRIP channel.
2596 * This function is called by the TTY module when the
2597 * STRIP line discipline is called for. Because we are
2598 * sure the tty line exists, we only have to link it to
2599 * a free STRIP channel...
2602 static int strip_open(struct tty_struct
*tty
)
2604 struct strip
*strip_info
= tty
->disc_data
;
2607 * First make sure we're not already connected.
2610 if (strip_info
&& strip_info
->magic
== STRIP_MAGIC
)
2614 * We need a write method.
2617 if (tty
->ops
->write
== NULL
|| tty
->ops
->set_termios
== NULL
)
2621 * OK. Find a free STRIP channel to use.
2623 if ((strip_info
= strip_alloc()) == NULL
)
2627 * Register our newly created device so it can be ifconfig'd
2628 * strip_dev_init() will be called as a side-effect
2631 if (register_netdev(strip_info
->dev
) != 0) {
2632 printk(KERN_ERR
"strip: register_netdev() failed.\n");
2633 strip_free(strip_info
);
2637 strip_info
->tty
= tty
;
2638 tty
->disc_data
= strip_info
;
2639 tty
->receive_room
= 65536;
2641 tty_driver_flush_buffer(tty
);
2644 * Restore default settings
2647 strip_info
->dev
->type
= ARPHRD_METRICOM
; /* dtang */
2653 tty
->termios
->c_iflag
|= IGNBRK
| IGNPAR
; /* Ignore breaks and parity errors. */
2654 tty
->termios
->c_cflag
|= CLOCAL
; /* Ignore modem control signals. */
2655 tty
->termios
->c_cflag
&= ~HUPCL
; /* Don't close on hup */
2657 printk(KERN_INFO
"STRIP: device \"%s\" activated\n",
2658 strip_info
->dev
->name
);
2661 * Done. We have linked the TTY line to a channel.
2663 return (strip_info
->dev
->base_addr
);
2667 * Close down a STRIP channel.
2668 * This means flushing out any pending queues, and then restoring the
2669 * TTY line discipline to what it was before it got hooked to STRIP
2670 * (which usually is TTY again).
2673 static void strip_close(struct tty_struct
*tty
)
2675 struct strip
*strip_info
= tty
->disc_data
;
2678 * First make sure we're connected.
2681 if (!strip_info
|| strip_info
->magic
!= STRIP_MAGIC
)
2684 unregister_netdev(strip_info
->dev
);
2686 tty
->disc_data
= NULL
;
2687 strip_info
->tty
= NULL
;
2688 printk(KERN_INFO
"STRIP: device \"%s\" closed down\n",
2689 strip_info
->dev
->name
);
2690 strip_free(strip_info
);
2691 tty
->disc_data
= NULL
;
2695 /************************************************************************/
2696 /* Perform I/O control calls on an active STRIP channel. */
2698 static int strip_ioctl(struct tty_struct
*tty
, struct file
*file
,
2699 unsigned int cmd
, unsigned long arg
)
2701 struct strip
*strip_info
= tty
->disc_data
;
2704 * First make sure we're connected.
2707 if (!strip_info
|| strip_info
->magic
!= STRIP_MAGIC
)
2712 if(copy_to_user((void __user
*) arg
, strip_info
->dev
->name
, strlen(strip_info
->dev
->name
) + 1))
2717 MetricomAddress addr
;
2718 //printk(KERN_INFO "%s: SIOCSIFHWADDR\n", strip_info->dev->name);
2719 if(copy_from_user(&addr
, (void __user
*) arg
, sizeof(MetricomAddress
)))
2721 return set_mac_address(strip_info
, &addr
);
2724 return tty_mode_ioctl(tty
, file
, cmd
, arg
);
2730 #ifdef CONFIG_COMPAT
2731 static long strip_compat_ioctl(struct tty_struct
*tty
, struct file
*file
,
2732 unsigned int cmd
, unsigned long arg
)
2737 return strip_ioctl(tty
, file
, cmd
,
2738 (unsigned long)compat_ptr(arg
));
2740 return -ENOIOCTLCMD
;
2744 /************************************************************************/
2745 /* Initialization */
2747 static struct tty_ldisc_ops strip_ldisc
= {
2748 .magic
= TTY_LDISC_MAGIC
,
2750 .owner
= THIS_MODULE
,
2752 .close
= strip_close
,
2753 .ioctl
= strip_ioctl
,
2754 #ifdef CONFIG_COMPAT
2755 .compat_ioctl
= strip_compat_ioctl
,
2757 .receive_buf
= strip_receive_buf
,
2758 .write_wakeup
= strip_write_some_more
,
2762 * Initialize the STRIP driver.
2763 * This routine is called at boot time, to bootstrap the multi-channel
2767 static char signon
[] __initdata
=
2768 KERN_INFO
"STRIP: Version %s (unlimited channels)\n";
2770 static int __init
strip_init_driver(void)
2774 printk(signon
, StripVersion
);
2778 * Fill in our line protocol discipline, and register it
2780 if ((status
= tty_register_ldisc(N_STRIP
, &strip_ldisc
)))
2781 printk(KERN_ERR
"STRIP: can't register line discipline (err = %d)\n",
2785 * Register the status file with /proc
2787 proc_net_fops_create(&init_net
, "strip", S_IFREG
| S_IRUGO
, &strip_seq_fops
);
2792 module_init(strip_init_driver
);
2794 static const char signoff
[] __exitdata
=
2795 KERN_INFO
"STRIP: Module Unloaded\n";
2797 static void __exit
strip_exit_driver(void)
2800 struct list_head
*p
,*n
;
2802 /* module ref count rules assure that all entries are unregistered */
2803 list_for_each_safe(p
, n
, &strip_list
) {
2804 struct strip
*s
= list_entry(p
, struct strip
, list
);
2808 /* Unregister with the /proc/net file here. */
2809 proc_net_remove(&init_net
, "strip");
2811 if ((i
= tty_unregister_ldisc(N_STRIP
)))
2812 printk(KERN_ERR
"STRIP: can't unregister line discipline (err = %d)\n", i
);
2817 module_exit(strip_exit_driver
);
2819 MODULE_AUTHOR("Stuart Cheshire <cheshire@cs.stanford.edu>");
2820 MODULE_DESCRIPTION("Starmode Radio IP (STRIP) Device Driver");
2821 MODULE_LICENSE("Dual BSD/GPL");
2823 MODULE_SUPPORTED_DEVICE("Starmode Radio IP (STRIP) modem");