drivers/usb/Kconfig

   1 #
   2 # USB device configuration
   3 #
   4
   5 menu "USB support"
   6
   7 # Host-side USB depends on having a host controller
   8 # NOTE:  dummy_hcd is always an option, but it's ignored here ...
   9 # NOTE:  SL-811 option should be board-specific ...
  10 config USB_ARCH_HAS_HCD
  11         boolean
  12         default y if USB_ARCH_HAS_OHCI
  13         default y if USB_ARCH_HAS_EHCI
  14         default y if ARM                                # SL-811
  15         default PCI
  16
  17 # many non-PCI SOC chips embed OHCI
  18 config USB_ARCH_HAS_OHCI
  19         boolean
  20         # ARM:
  21         default y if SA1111
  22         default y if ARCH_OMAP
  23         default y if ARCH_LH7A404
  24         default y if ARCH_S3C2410
  25         default y if PXA27x
  26         default y if ARCH_EP93XX
  27         default y if ARCH_AT91
  28         default y if ARCH_PNX4008
  29         # PPC:
  30         default y if STB03xxx
  31         default y if PPC_MPC52xx
  32         # MIPS:
  33         default y if SOC_AU1X00
  34         # more:
  35         default PCI
  36
  37 # some non-PCI hcds implement EHCI
  38 config USB_ARCH_HAS_EHCI
  39         boolean
  40         default y if PPC_83xx
  41         default y if SOC_AU1200
  42         default PCI
  43
  44 # ARM SA1111 chips have a non-PCI based "OHCI-compatible" USB host interface.
  45 config USB
  46         tristate "Support for Host-side USB"
  47         depends on USB_ARCH_HAS_HCD
  48         ---help---
  49           Universal Serial Bus (USB) is a specification for a serial bus
  50           subsystem which offers higher speeds and more features than the
  51           traditional PC serial port.  The bus supplies power to peripherals
  52           and allows for hot swapping.  Up to 127 USB peripherals can be
  53           connected to a single USB host in a tree structure.
  54
  55           The USB host is the root of the tree, the peripherals are the
  56           leaves and the inner nodes are special USB devices called hubs.
  57           Most PCs now have USB host ports, used to connect peripherals
  58           such as scanners, keyboards, mice, modems, cameras, disks,
  59           flash memory, network links, and printers to the PC.
  60
  61           Say Y here if your computer has a host-side USB port and you want
  62           to use USB devices.  You then need to say Y to at least one of the
  63           Host Controller Driver (HCD) options below.  Choose a USB 1.1
  64           controller, such as "UHCI HCD support" or "OHCI HCD support",
  65           and "EHCI HCD (USB 2.0) support" except for older systems that
  66           do not have USB 2.0 support.  It doesn't normally hurt to select
  67           them all if you are not certain.
  68
  69           If your system has a device-side USB port, used in the peripheral
  70           side of the USB protocol, see the "USB Gadget" framework instead.
  71
  72           After choosing your HCD, then select drivers for the USB peripherals
  73           you'll be using.  You may want to check out the information provided
  74           in <file:Documentation/usb/> and especially the links given in
  75           <file:Documentation/usb/usb-help.txt>.
  76
  77           To compile this driver as a module, choose M here: the
  78           module will be called usbcore.
  79
  80 source "drivers/usb/core/Kconfig"
  81
  82 source "drivers/usb/host/Kconfig"
  83
  84 source "drivers/usb/class/Kconfig"
  85
  86 source "drivers/usb/storage/Kconfig"
  87
  88 source "drivers/usb/input/Kconfig"
  89
  90 source "drivers/usb/image/Kconfig"
  91
  92 source "drivers/usb/net/Kconfig"
  93
  94 source "drivers/usb/mon/Kconfig"
  95
  96 comment "USB port drivers"
  97         depends on USB
  98
  99 config USB_USS720
 100         tristate "USS720 parport driver"
 101         depends on USB && PARPORT
 102         select PARPORT_NOT_PC
 103         ---help---
 104           This driver is for USB parallel port adapters that use the Lucent
 105           Technologies USS-720 chip. These cables are plugged into your USB
 106           port and provide USB compatibility to peripherals designed with
 107           parallel port interfaces.
 108
 109           The chip has two modes: automatic mode and manual mode. In automatic
 110           mode, it looks to the computer like a standard USB printer. Only
 111           printers may be connected to the USS-720 in this mode. The generic
 112           USB printer driver ("USB Printer support", above) may be used in
 113           that mode, and you can say N here if you want to use the chip only
 114           in this mode.
 115
 116           Manual mode is not limited to printers, any parallel port
 117           device should work. This driver utilizes manual mode.
 118           Note however that some operations are three orders of magnitude
 119           slower than on a PCI/ISA Parallel Port, so timing critical
 120           applications might not work.
 121
 122           Say Y here if you own an USS-720 USB->Parport cable and intend to
 123           connect anything other than a printer to it.
 124
 125           To compile this driver as a module, choose M here: the
 126           module will be called uss720.
 127
 128 source "drivers/usb/serial/Kconfig"
 129
 130 source "drivers/usb/misc/Kconfig"
 131
 132 source "drivers/usb/atm/Kconfig"
 133
 134 source "drivers/usb/gadget/Kconfig"
 135
 136 endmenu
 137