drivers/usb/gadget/atmel_usba_udc.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Register definition for Atmel USBA high speed USB device controller
   4  * [Original from Linux kernel: drivers/usb/gadget/atmel_usba_udc.h]
   5  *
   6  * Copyright (C) 2005-2013 Atmel Corporation
   7  *                         Bo Shen <voice.shen@atmel.com>
   8  */
   9
  10 #ifndef __LINUX_USB_GADGET_USBA_UDC_H__
  11 #define __LINUX_USB_GADGET_USBA_UDC_H__
  12
  13 /* USB register offsets */
  14 #define USBA_CTRL                               0x0000
  15 #define USBA_FNUM                               0x0004
  16 #define USBA_INT_ENB                            0x0010
  17 #define USBA_INT_STA                            0x0014
  18 #define USBA_INT_CLR                            0x0018
  19 #define USBA_EPT_RST                            0x001c
  20 #define USBA_TST                                0x00e0
  21
  22 /* USB endpoint register offsets */
  23 #define USBA_EPT_CFG                            0x0000
  24 #define USBA_EPT_CTL_ENB                        0x0004
  25 #define USBA_EPT_CTL_DIS                        0x0008
  26 #define USBA_EPT_CTL                            0x000c
  27 #define USBA_EPT_SET_STA                        0x0014
  28 #define USBA_EPT_CLR_STA                        0x0018
  29 #define USBA_EPT_STA                            0x001c
  30
  31 /* USB DMA register offsets */
  32 #define USBA_DMA_NXT_DSC                        0x0000
  33 #define USBA_DMA_ADDRESS                        0x0004
  34 #define USBA_DMA_CONTROL                        0x0008
  35 #define USBA_DMA_STATUS                         0x000c
  36
  37 /* Bitfields in CTRL */
  38 #define USBA_DEV_ADDR_OFFSET                    0
  39 #define USBA_DEV_ADDR_SIZE                      7
  40 #define USBA_FADDR_EN                           (1 <<  7)
  41 #define USBA_EN_USBA                            (1 <<  8)
  42 #define USBA_DETACH                             (1 <<  9)
  43 #define USBA_REMOTE_WAKE_UP                     (1 << 10)
  44 #define USBA_PULLD_DIS                          (1 << 11)
  45
  46 #define USBA_ENABLE_MASK                        (USBA_EN_USBA | USBA_PULLD_DIS)
  47 #define USBA_DISABLE_MASK                       USBA_DETACH
  48
  49 /* Bitfields in FNUM */
  50 #define USBA_MICRO_FRAME_NUM_OFFSET             0
  51 #define USBA_MICRO_FRAME_NUM_SIZE               3
  52 #define USBA_FRAME_NUMBER_OFFSET                3
  53 #define USBA_FRAME_NUMBER_SIZE                  11
  54 #define USBA_FRAME_NUM_ERROR                    (1 << 31)
  55
  56 /* Bitfields in INT_ENB/INT_STA/INT_CLR */
  57 #define USBA_HIGH_SPEED                         (1 <<  0)
  58 #define USBA_DET_SUSPEND                        (1 <<  1)
  59 #define USBA_MICRO_SOF                          (1 <<  2)
  60 #define USBA_SOF                                (1 <<  3)
  61 #define USBA_END_OF_RESET                       (1 <<  4)
  62 #define USBA_WAKE_UP                            (1 <<  5)
  63 #define USBA_END_OF_RESUME                      (1 <<  6)
  64 #define USBA_UPSTREAM_RESUME                    (1 <<  7)
  65 #define USBA_EPT_INT_OFFSET                     8
  66 #define USBA_EPT_INT_SIZE                       16
  67 #define USBA_DMA_INT_OFFSET                     24
  68 #define USBA_DMA_INT_SIZE                       8
  69
  70 /* Bitfields in EPT_RST */
  71 #define USBA_RST_OFFSET                         0
  72 #define USBA_RST_SIZE                           16
  73
  74 /* Bitfields in USBA_TST */
  75 #define USBA_SPEED_CFG_OFFSET                   0
  76 #define USBA_SPEED_CFG_SIZE                     2
  77 #define USBA_TST_J_MODE                         (1 <<  2)
  78 #define USBA_TST_K_MODE                         (1 <<  3)
  79 #define USBA_TST_PKT_MODE                       (1 <<  4)
  80 #define USBA_OPMODE2                            (1 <<  5)
  81
  82 /* Bitfields in EPT_CFG */
  83 #define USBA_EPT_SIZE_OFFSET                    0
  84 #define USBA_EPT_SIZE_SIZE                      3
  85 #define USBA_EPT_DIR_IN                         (1 <<  3)
  86 #define USBA_EPT_TYPE_OFFSET                    4
  87 #define USBA_EPT_TYPE_SIZE                      2
  88 #define USBA_BK_NUMBER_OFFSET                   6
  89 #define USBA_BK_NUMBER_SIZE                     2
  90 #define USBA_NB_TRANS_OFFSET                    8
  91 #define USBA_NB_TRANS_SIZE                      2
  92 #define USBA_EPT_MAPPED                         (1 << 31)
  93
  94 /* Bitfields in EPT_CTL/EPT_CTL_ENB/EPT_CTL_DIS */
  95 #define USBA_EPT_ENABLE                         (1 <<  0)
  96 #define USBA_AUTO_VALID                         (1 <<  1)
  97 #define USBA_INTDIS_DMA                         (1 <<  3)
  98 #define USBA_NYET_DIS                           (1 <<  4)
  99 #define USBA_DATAX_RX                           (1 <<  6)
 100 #define USBA_MDATA_RX                           (1 <<  7)
 101 /* Bits 8-15 and 31 enable interrupts for respective bits in EPT_STA */
 102 #define USBA_BUSY_BANK_IE                       (1 << 18)
 103
 104 /* Bitfields in EPT_SET_STA/EPT_CLR_STA/EPT_STA */
 105 #define USBA_FORCE_STALL                        (1 <<  5)
 106 #define USBA_TOGGLE_CLR                         (1 <<  6)
 107 #define USBA_TOGGLE_SEQ_OFFSET                  6
 108 #define USBA_TOGGLE_SEQ_SIZE                    2
 109 #define USBA_ERR_OVFLW                          (1 <<  8)
 110 #define USBA_RX_BK_RDY                          (1 <<  9)
 111 #define USBA_KILL_BANK                          (1 <<  9)
 112 #define USBA_TX_COMPLETE                        (1 << 10)
 113 #define USBA_TX_PK_RDY                          (1 << 11)
 114 #define USBA_ISO_ERR_TRANS                      (1 << 11)
 115 #define USBA_RX_SETUP                           (1 << 12)
 116 #define USBA_ISO_ERR_FLOW                       (1 << 12)
 117 #define USBA_STALL_SENT                         (1 << 13)
 118 #define USBA_ISO_ERR_CRC                        (1 << 13)
 119 #define USBA_ISO_ERR_NBTRANS                    (1 << 13)
 120 #define USBA_NAK_IN                             (1 << 14)
 121 #define USBA_ISO_ERR_FLUSH                      (1 << 14)
 122 #define USBA_NAK_OUT                            (1 << 15)
 123 #define USBA_CURRENT_BANK_OFFSET                16
 124 #define USBA_CURRENT_BANK_SIZE                  2
 125 #define USBA_BUSY_BANKS_OFFSET                  18
 126 #define USBA_BUSY_BANKS_SIZE                    2
 127 #define USBA_BYTE_COUNT_OFFSET                  20
 128 #define USBA_BYTE_COUNT_SIZE                    11
 129 #define USBA_SHORT_PACKET                       (1 << 31)
 130
 131 /* Bitfields in DMA_CONTROL */
 132 #define USBA_DMA_CH_EN                          (1 <<  0)
 133 #define USBA_DMA_LINK                           (1 <<  1)
 134 #define USBA_DMA_END_TR_EN                      (1 <<  2)
 135 #define USBA_DMA_END_BUF_EN                     (1 <<  3)
 136 #define USBA_DMA_END_TR_IE                      (1 <<  4)
 137 #define USBA_DMA_END_BUF_IE                     (1 <<  5)
 138 #define USBA_DMA_DESC_LOAD_IE                   (1 <<  6)
 139 #define USBA_DMA_BURST_LOCK                     (1 <<  7)
 140 #define USBA_DMA_BUF_LEN_OFFSET                 16
 141 #define USBA_DMA_BUF_LEN_SIZE                   16
 142
 143 /* Bitfields in DMA_STATUS */
 144 #define USBA_DMA_CH_ACTIVE                      (1 <<  1)
 145 #define USBA_DMA_END_TR_ST                      (1 <<  4)
 146 #define USBA_DMA_END_BUF_ST                     (1 <<  5)
 147 #define USBA_DMA_DESC_LOAD_ST                   (1 <<  6)
 148
 149 /* Constants for SPEED_CFG */
 150 #define USBA_SPEED_CFG_NORMAL                   0
 151 #define USBA_SPEED_CFG_FORCE_HIGH               2
 152 #define USBA_SPEED_CFG_FORCE_FULL               3
 153
 154 /* Constants for EPT_SIZE */
 155 #define USBA_EPT_SIZE_8                         0
 156 #define USBA_EPT_SIZE_16                        1
 157 #define USBA_EPT_SIZE_32                        2
 158 #define USBA_EPT_SIZE_64                        3
 159 #define USBA_EPT_SIZE_128                       4
 160 #define USBA_EPT_SIZE_256                       5
 161 #define USBA_EPT_SIZE_512                       6
 162 #define USBA_EPT_SIZE_1024                      7
 163
 164 /* Constants for EPT_TYPE */
 165 #define USBA_EPT_TYPE_CONTROL                   0
 166 #define USBA_EPT_TYPE_ISO                       1
 167 #define USBA_EPT_TYPE_BULK                      2
 168 #define USBA_EPT_TYPE_INT                       3
 169
 170 /* Constants for BK_NUMBER */
 171 #define USBA_BK_NUMBER_ZERO                     0
 172 #define USBA_BK_NUMBER_ONE                      1
 173 #define USBA_BK_NUMBER_DOUBLE                   2
 174 #define USBA_BK_NUMBER_TRIPLE                   3
 175
 176 /* Bit manipulation macros */
 177 #define USBA_BF(name, value)                                    \
 178         (((value) & ((1 << USBA_##name##_SIZE) - 1))            \
 179          << USBA_##name##_OFFSET)
 180 #define USBA_BFEXT(name, value)                                 \
 181         (((value) >> USBA_##name##_OFFSET)                      \
 182          & ((1 << USBA_##name##_SIZE) - 1))
 183 #define USBA_BFINS(name, value, old)                            \
 184         (((old) & ~(((1 << USBA_##name##_SIZE) - 1)             \
 185                     << USBA_##name##_OFFSET))                   \
 186          | USBA_BF(name, value))
 187
 188 /* Register access macros */
 189 #define usba_readl(udc, reg)                                    \
 190         __raw_readl((udc)->regs + USBA_##reg)
 191 #define usba_writel(udc, reg, value)                            \
 192         __raw_writel((value), (udc)->regs + USBA_##reg)
 193 #define usba_ep_readl(ep, reg)                                  \
 194         __raw_readl((ep)->ep_regs + USBA_EPT_##reg)
 195 #define usba_ep_writel(ep, reg, value)                          \
 196         __raw_writel((value), (ep)->ep_regs + USBA_EPT_##reg)
 197 #define usba_dma_readl(ep, reg)                                 \
 198         __raw_readl((ep)->dma_regs + USBA_DMA_##reg)
 199 #define usba_dma_writel(ep, reg, value)                         \
 200         __raw_writel((value), (ep)->dma_regs + USBA_DMA_##reg)
 201
 202 /* Calculate base address for a given endpoint or DMA controller */
 203 #define USBA_EPT_BASE(x)        (0x100 + (x) * 0x20)
 204 #define USBA_DMA_BASE(x)        (0x300 + (x) * 0x10)
 205 #define USBA_FIFO_BASE(x)       ((x) << 16)
 206
 207 /* Synth parameters */
 208 #define USBA_NR_ENDPOINTS       7
 209
 210 #define EP0_FIFO_SIZE           64
 211 #define EP0_EPT_SIZE            USBA_EPT_SIZE_64
 212 #define EP0_NR_BANKS            1
 213
 214 #define DBG_ERR         0x0001  /* report all error returns */
 215 #define DBG_HW          0x0002  /* debug hardware initialization */
 216 #define DBG_GADGET      0x0004  /* calls to/from gadget driver */
 217 #define DBG_INT         0x0008  /* interrupts */
 218 #define DBG_BUS         0x0010  /* report changes in bus state */
 219 #define DBG_QUEUE       0x0020  /* debug request queue processing */
 220 #define DBG_FIFO        0x0040  /* debug FIFO contents */
 221 #define DBG_DMA         0x0080  /* debug DMA handling */
 222 #define DBG_REQ         0x0100  /* print out queued request length */
 223 #define DBG_ALL         0xffff
 224 #define DBG_NONE        0x0000
 225
 226 #define DEBUG_LEVEL     (DBG_ERR)
 227
 228 #define DBG(level, fmt, ...)                                    \
 229         do {                                                    \
 230                 if ((level) & DEBUG_LEVEL)                      \
 231                         debug("udc: " fmt, ## __VA_ARGS__);     \
 232         } while (0)
 233
 234 enum usba_ctrl_state {
 235         WAIT_FOR_SETUP,
 236         DATA_STAGE_IN,
 237         DATA_STAGE_OUT,
 238         STATUS_STAGE_IN,
 239         STATUS_STAGE_OUT,
 240         STATUS_STAGE_ADDR,
 241         STATUS_STAGE_TEST,
 242 };
 243
 244 struct usba_dma_desc {
 245         dma_addr_t next;
 246         dma_addr_t addr;
 247         u32 ctrl;
 248 };
 249
 250 struct usba_ep {
 251         int                                     state;
 252         void                                    *ep_regs;
 253         void                                    *dma_regs;
 254         void                                    *fifo;
 255         struct usb_ep                           ep;
 256         struct usba_udc                         *udc;
 257
 258         struct list_head                        queue;
 259
 260         u16                                     fifo_size;
 261         u8                                      nr_banks;
 262         u8                                      index;
 263         unsigned int                            can_dma:1;
 264         unsigned int                            can_isoc:1;
 265         unsigned int                            is_isoc:1;
 266         unsigned int                            is_in:1;
 267
 268         const struct usb_endpoint_descriptor    *desc;
 269 };
 270
 271 struct usba_request {
 272         struct usb_request                      req;
 273         struct list_head                        queue;
 274
 275         u32                                     ctrl;
 276
 277         unsigned int                            submitted:1;
 278         unsigned int                            last_transaction:1;
 279         unsigned int                            using_dma:1;
 280         unsigned int                            mapped:1;
 281 };
 282
 283 struct usba_udc {
 284         void *regs;
 285         void *fifo;
 286
 287         struct usb_gadget gadget;
 288         struct usb_gadget_driver *driver;
 289         struct platform_device *pdev;
 290         int irq;
 291         int vbus_pin;
 292         int vbus_pin_inverted;
 293         int num_ep;
 294         struct usba_ep *usba_ep;
 295
 296         u16 devstatus;
 297
 298         u16 test_mode;
 299         int vbus_prev;
 300 };
 301
 302 static inline struct usba_ep *to_usba_ep(struct usb_ep *ep)
 303 {
 304         return container_of(ep, struct usba_ep, ep);
 305 }
 306
 307 static inline struct usba_request *to_usba_req(struct usb_request *req)
 308 {
 309         return container_of(req, struct usba_request, req);
 310 }
 311
 312 static inline struct usba_udc *to_usba_udc(struct usb_gadget *gadget)
 313 {
 314         return container_of(gadget, struct usba_udc, gadget);
 315 }
 316
 317 #define ep_is_control(ep)       ((ep)->index == 0)
 318 #define ep_is_idle(ep)          ((ep)->state == EP_STATE_IDLE)
 319
 320 #endif /* __LINUX_USB_GADGET_USBA_UDC_H */