Merge git://git.denx.de/u-boot-mmc

[people/ms/u-boot.git] / drivers / usb / host / xhci.c

/*
 * USB HOST XHCI Controller stack
 *
 * Based on xHCI host controller driver in linux-kernel
 * by Sarah Sharp.
 *
 * Copyright (C) 2008 Intel Corp.
 * Author: Sarah Sharp
 *
 * Copyright (C) 2013 Samsung Electronics Co.Ltd
 * Authors: Vivek Gautam <gautam.vivek@samsung.com>
 *          Vikas Sajjan <vikas.sajjan@samsung.com>
 *
 * SPDX-License-Identifier:     GPL-2.0+
 */

/**
 * This file gives the xhci stack for usb3.0 looking into
 * xhci specification Rev1.0 (5/21/10).
 * The quirk devices support hasn't been given yet.
 */

#include <common.h>
#include <dm.h>
#include <asm/byteorder.h>
#include <usb.h>
#include <malloc.h>
#include <watchdog.h>
#include <asm/cache.h>
#include <asm/unaligned.h>
#include <linux/errno.h>
#include "xhci.h"

#ifndef CONFIG_USB_MAX_CONTROLLER_COUNT
#define CONFIG_USB_MAX_CONTROLLER_COUNT 1
#endif

static struct descriptor {
        struct usb_hub_descriptor hub;
        struct usb_device_descriptor device;
        struct usb_config_descriptor config;
        struct usb_interface_descriptor interface;
        struct usb_endpoint_descriptor endpoint;
        struct usb_ss_ep_comp_descriptor ep_companion;
} __attribute__ ((packed)) descriptor = {
        {
                0xc,            /* bDescLength */
                0x2a,           /* bDescriptorType: hub descriptor */
                2,              /* bNrPorts -- runtime modified */
                cpu_to_le16(0x8), /* wHubCharacteristics */
                10,             /* bPwrOn2PwrGood */
                0,              /* bHubCntrCurrent */
                {               /* Device removable */
                }               /* at most 7 ports! XXX */
        },
        {
                0x12,           /* bLength */
                1,              /* bDescriptorType: UDESC_DEVICE */
                cpu_to_le16(0x0300), /* bcdUSB: v3.0 */
                9,              /* bDeviceClass: UDCLASS_HUB */
                0,              /* bDeviceSubClass: UDSUBCLASS_HUB */
                3,              /* bDeviceProtocol: UDPROTO_SSHUBSTT */
                9,              /* bMaxPacketSize: 512 bytes  2^9 */
                0x0000,         /* idVendor */
                0x0000,         /* idProduct */
                cpu_to_le16(0x0100), /* bcdDevice */
                1,              /* iManufacturer */
                2,              /* iProduct */
                0,              /* iSerialNumber */
                1               /* bNumConfigurations: 1 */
        },
        {
                0x9,
                2,              /* bDescriptorType: UDESC_CONFIG */
                cpu_to_le16(0x1f), /* includes SS endpoint descriptor */
                1,              /* bNumInterface */
                1,              /* bConfigurationValue */
                0,              /* iConfiguration */
                0x40,           /* bmAttributes: UC_SELF_POWER */
                0               /* bMaxPower */
        },
        {
                0x9,            /* bLength */
                4,              /* bDescriptorType: UDESC_INTERFACE */
                0,              /* bInterfaceNumber */
                0,              /* bAlternateSetting */
                1,              /* bNumEndpoints */
                9,              /* bInterfaceClass: UICLASS_HUB */
                0,              /* bInterfaceSubClass: UISUBCLASS_HUB */
                0,              /* bInterfaceProtocol: UIPROTO_HSHUBSTT */
                0               /* iInterface */
        },
        {
                0x7,            /* bLength */
                5,              /* bDescriptorType: UDESC_ENDPOINT */
                0x81,           /* bEndpointAddress: IN endpoint 1 */
                3,              /* bmAttributes: UE_INTERRUPT */
                8,              /* wMaxPacketSize */
                255             /* bInterval */
        },
        {
                0x06,           /* ss_bLength */
                0x30,           /* ss_bDescriptorType: SS EP Companion */
                0x00,           /* ss_bMaxBurst: allows 1 TX between ACKs */
                /* ss_bmAttributes: 1 packet per service interval */
                0x00,
                /* ss_wBytesPerInterval: 15 bits for max 15 ports */
                cpu_to_le16(0x02),
        },
};

#ifndef CONFIG_DM_USB
static struct xhci_ctrl xhcic[CONFIG_USB_MAX_CONTROLLER_COUNT];
#endif

struct xhci_ctrl *xhci_get_ctrl(struct usb_device *udev)
{
#ifdef CONFIG_DM_USB
        struct udevice *dev;

        /* Find the USB controller */
        for (dev = udev->dev;
             device_get_uclass_id(dev) != UCLASS_USB;
             dev = dev->parent)
                ;
        return dev_get_priv(dev);
#else
        return udev->controller;
#endif
}

/**
 * Waits for as per specified amount of time
 * for the "result" to match with "done"
 *
 * @param ptr   pointer to the register to be read
 * @param mask  mask for the value read
 * @param done  value to be campared with result
 * @param usec  time to wait till
 * @return 0 if handshake is success else < 0 on failure
 */
static int handshake(uint32_t volatile *ptr, uint32_t mask,
                                        uint32_t done, int usec)
{
        uint32_t result;

        do {
                result = xhci_readl(ptr);
                if (result == ~(uint32_t)0)
                        return -ENODEV;
                result &= mask;
                if (result == done)
                        return 0;
                usec--;
                udelay(1);
        } while (usec > 0);

        return -ETIMEDOUT;
}

/**
 * Set the run bit and wait for the host to be running.
 *
 * @param hcor  pointer to host controller operation registers
 * @return status of the Handshake
 */
static int xhci_start(struct xhci_hcor *hcor)
{
        u32 temp;
        int ret;

        puts("Starting the controller\n");
        temp = xhci_readl(&hcor->or_usbcmd);
        temp |= (CMD_RUN);
        xhci_writel(&hcor->or_usbcmd, temp);

        /*
         * Wait for the HCHalted Status bit to be 0 to indicate the host is
         * running.
         */
        ret = handshake(&hcor->or_usbsts, STS_HALT, 0, XHCI_MAX_HALT_USEC);
        if (ret)
                debug("Host took too long to start, "
                                "waited %u microseconds.\n",
                                XHCI_MAX_HALT_USEC);
        return ret;
}

/**
 * Resets the XHCI Controller
 *
 * @param hcor  pointer to host controller operation registers
 * @return -EBUSY if XHCI Controller is not halted else status of handshake
 */
static int xhci_reset(struct xhci_hcor *hcor)
{
        u32 cmd;
        u32 state;
        int ret;

        /* Halting the Host first */
        debug("// Halt the HC: %p\n", hcor);
        state = xhci_readl(&hcor->or_usbsts) & STS_HALT;
        if (!state) {
                cmd = xhci_readl(&hcor->or_usbcmd);
                cmd &= ~CMD_RUN;
                xhci_writel(&hcor->or_usbcmd, cmd);
        }

        ret = handshake(&hcor->or_usbsts,
                        STS_HALT, STS_HALT, XHCI_MAX_HALT_USEC);
        if (ret) {
                printf("Host not halted after %u microseconds.\n",
                                XHCI_MAX_HALT_USEC);
                return -EBUSY;
        }

        debug("// Reset the HC\n");
        cmd = xhci_readl(&hcor->or_usbcmd);
        cmd |= CMD_RESET;
        xhci_writel(&hcor->or_usbcmd, cmd);

        ret = handshake(&hcor->or_usbcmd, CMD_RESET, 0, XHCI_MAX_RESET_USEC);
        if (ret)
                return ret;

        /*
         * xHCI cannot write to any doorbells or operational registers other
         * than status until the "Controller Not Ready" flag is cleared.
         */
        return handshake(&hcor->or_usbsts, STS_CNR, 0, XHCI_MAX_RESET_USEC);
}

/**
 * Used for passing endpoint bitmasks between the core and HCDs.
 * Find the index for an endpoint given its descriptor.
 * Use the return value to right shift 1 for the bitmask.
 *
 * Index  = (epnum * 2) + direction - 1,
 * where direction = 0 for OUT, 1 for IN.
 * For control endpoints, the IN index is used (OUT index is unused), so
 * index = (epnum * 2) + direction - 1 = (epnum * 2) + 1 - 1 = (epnum * 2)
 *
 * @param desc  USB enpdoint Descriptor
 * @return index of the Endpoint
 */
static unsigned int xhci_get_ep_index(struct usb_endpoint_descriptor *desc)
{
        unsigned int index;

        if (usb_endpoint_xfer_control(desc))
                index = (unsigned int)(usb_endpoint_num(desc) * 2);
        else
                index = (unsigned int)((usb_endpoint_num(desc) * 2) -
                                (usb_endpoint_dir_in(desc) ? 0 : 1));

        return index;
}

/*
 * Convert bInterval expressed in microframes (in 1-255 range) to exponent of
 * microframes, rounded down to nearest power of 2.
 */
static unsigned int xhci_microframes_to_exponent(unsigned int desc_interval,
                                                 unsigned int min_exponent,
                                                 unsigned int max_exponent)
{
        unsigned int interval;

        interval = fls(desc_interval) - 1;
        interval = clamp_val(interval, min_exponent, max_exponent);
        if ((1 << interval) != desc_interval)
                debug("rounding interval to %d microframes, "\
                      "ep desc says %d microframes\n",
                      1 << interval, desc_interval);

        return interval;
}

static unsigned int xhci_parse_microframe_interval(struct usb_device *udev,
        struct usb_endpoint_descriptor *endpt_desc)
{
        if (endpt_desc->bInterval == 0)
                return 0;

        return xhci_microframes_to_exponent(endpt_desc->bInterval, 0, 15);
}

static unsigned int xhci_parse_frame_interval(struct usb_device *udev,
        struct usb_endpoint_descriptor *endpt_desc)
{
        return xhci_microframes_to_exponent(endpt_desc->bInterval * 8, 3, 10);
}

/*
 * Convert interval expressed as 2^(bInterval - 1) == interval into
 * straight exponent value 2^n == interval.
 */
static unsigned int xhci_parse_exponent_interval(struct usb_device *udev,
        struct usb_endpoint_descriptor *endpt_desc)
{
        unsigned int interval;

        interval = clamp_val(endpt_desc->bInterval, 1, 16) - 1;
        if (interval != endpt_desc->bInterval - 1)
                debug("ep %#x - rounding interval to %d %sframes\n",
                      endpt_desc->bEndpointAddress, 1 << interval,
                      udev->speed == USB_SPEED_FULL ? "" : "micro");

        if (udev->speed == USB_SPEED_FULL) {
                /*
                 * Full speed isoc endpoints specify interval in frames,
                 * not microframes. We are using microframes everywhere,
                 * so adjust accordingly.
                 */
                interval += 3;  /* 1 frame = 2^3 uframes */
        }

        return interval;
}

/*
 * Return the polling or NAK interval.
 *
 * The polling interval is expressed in "microframes". If xHCI's Interval field
 * is set to N, it will service the endpoint every 2^(Interval)*125us.
 *
 * The NAK interval is one NAK per 1 to 255 microframes, or no NAKs if interval
 * is set to 0.
 */
static unsigned int xhci_get_endpoint_interval(struct usb_device *udev,
        struct usb_endpoint_descriptor *endpt_desc)
{
        unsigned int interval = 0;

        switch (udev->speed) {
        case USB_SPEED_HIGH:
                /* Max NAK rate */
                if (usb_endpoint_xfer_control(endpt_desc) ||
                    usb_endpoint_xfer_bulk(endpt_desc)) {
                        interval = xhci_parse_microframe_interval(udev,
                                                                  endpt_desc);
                        break;
                }
                /* Fall through - SS and HS isoc/int have same decoding */

        case USB_SPEED_SUPER:
                if (usb_endpoint_xfer_int(endpt_desc) ||
                    usb_endpoint_xfer_isoc(endpt_desc)) {
                        interval = xhci_parse_exponent_interval(udev,
                                                                endpt_desc);
                }
                break;

        case USB_SPEED_FULL:
                if (usb_endpoint_xfer_isoc(endpt_desc)) {
                        interval = xhci_parse_exponent_interval(udev,
                                                                endpt_desc);
                        break;
                }
                /*
                 * Fall through for interrupt endpoint interval decoding
                 * since it uses the same rules as low speed interrupt
                 * endpoints.
                 */

        case USB_SPEED_LOW:
                if (usb_endpoint_xfer_int(endpt_desc) ||
                    usb_endpoint_xfer_isoc(endpt_desc)) {
                        interval = xhci_parse_frame_interval(udev, endpt_desc);
                }
                break;

        default:
                BUG();
        }

        return interval;
}

/*
 * The "Mult" field in the endpoint context is only set for SuperSpeed isoc eps.
 * High speed endpoint descriptors can define "the number of additional
 * transaction opportunities per microframe", but that goes in the Max Burst
 * endpoint context field.
 */
static u32 xhci_get_endpoint_mult(struct usb_device *udev,
        struct usb_endpoint_descriptor *endpt_desc,
        struct usb_ss_ep_comp_descriptor *ss_ep_comp_desc)
{
        if (udev->speed < USB_SPEED_SUPER ||
            !usb_endpoint_xfer_isoc(endpt_desc))
                return 0;

        return ss_ep_comp_desc->bmAttributes;
}

static u32 xhci_get_endpoint_max_burst(struct usb_device *udev,
        struct usb_endpoint_descriptor *endpt_desc,
        struct usb_ss_ep_comp_descriptor *ss_ep_comp_desc)
{
        /* Super speed and Plus have max burst in ep companion desc */
        if (udev->speed >= USB_SPEED_SUPER)
                return ss_ep_comp_desc->bMaxBurst;

        if (udev->speed == USB_SPEED_HIGH &&
            (usb_endpoint_xfer_isoc(endpt_desc) ||
             usb_endpoint_xfer_int(endpt_desc)))
                return usb_endpoint_maxp_mult(endpt_desc) - 1;

        return 0;
}

/*
 * Return the maximum endpoint service interval time (ESIT) payload.
 * Basically, this is the maxpacket size, multiplied by the burst size
 * and mult size.
 */
static u32 xhci_get_max_esit_payload(struct usb_device *udev,
        struct usb_endpoint_descriptor *endpt_desc,
        struct usb_ss_ep_comp_descriptor *ss_ep_comp_desc)
{
        int max_burst;
        int max_packet;

        /* Only applies for interrupt or isochronous endpoints */
        if (usb_endpoint_xfer_control(endpt_desc) ||
            usb_endpoint_xfer_bulk(endpt_desc))
                return 0;

        /* SuperSpeed Isoc ep with less than 48k per esit */
        if (udev->speed >= USB_SPEED_SUPER)
                return le16_to_cpu(ss_ep_comp_desc->wBytesPerInterval);

        max_packet = usb_endpoint_maxp(endpt_desc);
        max_burst = usb_endpoint_maxp_mult(endpt_desc);

        /* A 0 in max burst means 1 transfer per ESIT */
        return max_packet * max_burst;
}

/**
 * Issue a configure endpoint command or evaluate context command
 * and wait for it to finish.
 *
 * @param udev  pointer to the Device Data Structure
 * @param ctx_change    flag to indicate the Context has changed or NOT
 * @return 0 on success, -1 on failure
 */
static int xhci_configure_endpoints(struct usb_device *udev, bool ctx_change)
{
        struct xhci_container_ctx *in_ctx;
        struct xhci_virt_device *virt_dev;
        struct xhci_ctrl *ctrl = xhci_get_ctrl(udev);
        union xhci_trb *event;

        virt_dev = ctrl->devs[udev->slot_id];
        in_ctx = virt_dev->in_ctx;

        xhci_flush_cache((uintptr_t)in_ctx->bytes, in_ctx->size);
        xhci_queue_command(ctrl, in_ctx->bytes, udev->slot_id, 0,
                           ctx_change ? TRB_EVAL_CONTEXT : TRB_CONFIG_EP);
        event = xhci_wait_for_event(ctrl, TRB_COMPLETION);
        BUG_ON(TRB_TO_SLOT_ID(le32_to_cpu(event->event_cmd.flags))
                != udev->slot_id);

        switch (GET_COMP_CODE(le32_to_cpu(event->event_cmd.status))) {
        case COMP_SUCCESS:
                debug("Successful %s command\n",
                        ctx_change ? "Evaluate Context" : "Configure Endpoint");
                break;
        default:
                printf("ERROR: %s command returned completion code %d.\n",
                        ctx_change ? "Evaluate Context" : "Configure Endpoint",
                        GET_COMP_CODE(le32_to_cpu(event->event_cmd.status)));
                return -EINVAL;
        }

        xhci_acknowledge_event(ctrl);

        return 0;
}

/**
 * Configure the endpoint, programming the device contexts.
 *
 * @param udev  pointer to the USB device structure
 * @return returns the status of the xhci_configure_endpoints
 */
static int xhci_set_configuration(struct usb_device *udev)
{
        struct xhci_container_ctx *in_ctx;
        struct xhci_container_ctx *out_ctx;
        struct xhci_input_control_ctx *ctrl_ctx;
        struct xhci_slot_ctx *slot_ctx;
        struct xhci_ep_ctx *ep_ctx[MAX_EP_CTX_NUM];
        int cur_ep;
        int max_ep_flag = 0;
        int ep_index;
        unsigned int dir;
        unsigned int ep_type;
        struct xhci_ctrl *ctrl = xhci_get_ctrl(udev);
        int num_of_ep;
        int ep_flag = 0;
        u64 trb_64 = 0;
        int slot_id = udev->slot_id;
        struct xhci_virt_device *virt_dev = ctrl->devs[slot_id];
        struct usb_interface *ifdesc;
        u32 max_esit_payload;
        unsigned int interval;
        unsigned int mult;
        unsigned int max_burst;
        unsigned int avg_trb_len;
        unsigned int err_count = 0;

        out_ctx = virt_dev->out_ctx;
        in_ctx = virt_dev->in_ctx;

        num_of_ep = udev->config.if_desc[0].no_of_ep;
        ifdesc = &udev->config.if_desc[0];

        ctrl_ctx = xhci_get_input_control_ctx(in_ctx);
        /* Initialize the input context control */
        ctrl_ctx->add_flags = cpu_to_le32(SLOT_FLAG);
        ctrl_ctx->drop_flags = 0;

        /* EP_FLAG gives values 1 & 4 for EP1OUT and EP2IN */
        for (cur_ep = 0; cur_ep < num_of_ep; cur_ep++) {
                ep_flag = xhci_get_ep_index(&ifdesc->ep_desc[cur_ep]);
                ctrl_ctx->add_flags |= cpu_to_le32(1 << (ep_flag + 1));
                if (max_ep_flag < ep_flag)
                        max_ep_flag = ep_flag;
        }

        xhci_inval_cache((uintptr_t)out_ctx->bytes, out_ctx->size);

        /* slot context */
        xhci_slot_copy(ctrl, in_ctx, out_ctx);
        slot_ctx = xhci_get_slot_ctx(ctrl, in_ctx);
        slot_ctx->dev_info &= ~(LAST_CTX_MASK);
        slot_ctx->dev_info |= cpu_to_le32(LAST_CTX(max_ep_flag + 1) | 0);

        xhci_endpoint_copy(ctrl, in_ctx, out_ctx, 0);

        /* filling up ep contexts */
        for (cur_ep = 0; cur_ep < num_of_ep; cur_ep++) {
                struct usb_endpoint_descriptor *endpt_desc = NULL;
                struct usb_ss_ep_comp_descriptor *ss_ep_comp_desc = NULL;

                endpt_desc = &ifdesc->ep_desc[cur_ep];
                ss_ep_comp_desc = &ifdesc->ss_ep_comp_desc[cur_ep];
                trb_64 = 0;

                /*
                 * Get values to fill the endpoint context, mostly from ep
                 * descriptor. The average TRB buffer lengt for bulk endpoints
                 * is unclear as we have no clue on scatter gather list entry
                 * size. For Isoc and Int, set it to max available.
                 * See xHCI 1.1 spec 4.14.1.1 for details.
                 */
                max_esit_payload = xhci_get_max_esit_payload(udev, endpt_desc,
                                                             ss_ep_comp_desc);
                interval = xhci_get_endpoint_interval(udev, endpt_desc);
                mult = xhci_get_endpoint_mult(udev, endpt_desc,
                                              ss_ep_comp_desc);
                max_burst = xhci_get_endpoint_max_burst(udev, endpt_desc,
                                                        ss_ep_comp_desc);
                avg_trb_len = max_esit_payload;

                ep_index = xhci_get_ep_index(endpt_desc);
                ep_ctx[ep_index] = xhci_get_ep_ctx(ctrl, in_ctx, ep_index);

                /* Allocate the ep rings */
                virt_dev->eps[ep_index].ring = xhci_ring_alloc(1, true);
                if (!virt_dev->eps[ep_index].ring)
                        return -ENOMEM;

                /*NOTE: ep_desc[0] actually represents EP1 and so on */
                dir = (((endpt_desc->bEndpointAddress) & (0x80)) >> 7);
                ep_type = (((endpt_desc->bmAttributes) & (0x3)) | (dir << 2));

                ep_ctx[ep_index]->ep_info =
                        cpu_to_le32(EP_MAX_ESIT_PAYLOAD_HI(max_esit_payload) |
                        EP_INTERVAL(interval) | EP_MULT(mult));

                ep_ctx[ep_index]->ep_info2 =
                        cpu_to_le32(ep_type << EP_TYPE_SHIFT);
                ep_ctx[ep_index]->ep_info2 |=
                        cpu_to_le32(MAX_PACKET
                        (get_unaligned(&endpt_desc->wMaxPacketSize)));

                /* Allow 3 retries for everything but isoc, set CErr = 3 */
                if (!usb_endpoint_xfer_isoc(endpt_desc))
                        err_count = 3;
                ep_ctx[ep_index]->ep_info2 |=
                        cpu_to_le32(MAX_BURST(max_burst) |
                        ERROR_COUNT(err_count));

                trb_64 = (uintptr_t)
                                virt_dev->eps[ep_index].ring->enqueue;
                ep_ctx[ep_index]->deq = cpu_to_le64(trb_64 |
                                virt_dev->eps[ep_index].ring->cycle_state);

                /*
                 * xHCI spec 6.2.3:
                 * 'Average TRB Length' should be 8 for control endpoints.
                 */
                if (usb_endpoint_xfer_control(endpt_desc))
                        avg_trb_len = 8;
                ep_ctx[ep_index]->tx_info =
                        cpu_to_le32(EP_MAX_ESIT_PAYLOAD_LO(max_esit_payload) |
                        EP_AVG_TRB_LENGTH(avg_trb_len));
        }

        return xhci_configure_endpoints(udev, false);
}

/**
 * Issue an Address Device command (which will issue a SetAddress request to
 * the device).
 *
 * @param udev pointer to the Device Data Structure
 * @return 0 if successful else error code on failure
 */
static int xhci_address_device(struct usb_device *udev, int root_portnr)
{
        int ret = 0;
        struct xhci_ctrl *ctrl = xhci_get_ctrl(udev);
        struct xhci_slot_ctx *slot_ctx;
        struct xhci_input_control_ctx *ctrl_ctx;
        struct xhci_virt_device *virt_dev;
        int slot_id = udev->slot_id;
        union xhci_trb *event;

        virt_dev = ctrl->devs[slot_id];

        /*
         * This is the first Set Address since device plug-in
         * so setting up the slot context.
         */
        debug("Setting up addressable devices %p\n", ctrl->dcbaa);
        xhci_setup_addressable_virt_dev(ctrl, udev, root_portnr);

        ctrl_ctx = xhci_get_input_control_ctx(virt_dev->in_ctx);
        ctrl_ctx->add_flags = cpu_to_le32(SLOT_FLAG | EP0_FLAG);
        ctrl_ctx->drop_flags = 0;

        xhci_queue_command(ctrl, (void *)ctrl_ctx, slot_id, 0, TRB_ADDR_DEV);
        event = xhci_wait_for_event(ctrl, TRB_COMPLETION);
        BUG_ON(TRB_TO_SLOT_ID(le32_to_cpu(event->event_cmd.flags)) != slot_id);

        switch (GET_COMP_CODE(le32_to_cpu(event->event_cmd.status))) {
        case COMP_CTX_STATE:
        case COMP_EBADSLT:
                printf("Setup ERROR: address device command for slot %d.\n",
                                                                slot_id);
                ret = -EINVAL;
                break;
        case COMP_TX_ERR:
                puts("Device not responding to set address.\n");
                ret = -EPROTO;
                break;
        case COMP_DEV_ERR:
                puts("ERROR: Incompatible device"
                                        "for address device command.\n");
                ret = -ENODEV;
                break;
        case COMP_SUCCESS:
                debug("Successful Address Device command\n");
                udev->status = 0;
                break;
        default:
                printf("ERROR: unexpected command completion code 0x%x.\n",
                        GET_COMP_CODE(le32_to_cpu(event->event_cmd.status)));
                ret = -EINVAL;
                break;
        }

        xhci_acknowledge_event(ctrl);

        if (ret < 0)
                /*
                 * TODO: Unsuccessful Address Device command shall leave the
                 * slot in default state. So, issue Disable Slot command now.
                 */
                return ret;

        xhci_inval_cache((uintptr_t)virt_dev->out_ctx->bytes,
                         virt_dev->out_ctx->size);
        slot_ctx = xhci_get_slot_ctx(ctrl, virt_dev->out_ctx);

        debug("xHC internal address is: %d\n",
                le32_to_cpu(slot_ctx->dev_state) & DEV_ADDR_MASK);

        return 0;
}

/**
 * Issue Enable slot command to the controller to allocate
 * device slot and assign the slot id. It fails if the xHC
 * ran out of device slots, the Enable Slot command timed out,
 * or allocating memory failed.
 *
 * @param udev  pointer to the Device Data Structure
 * @return Returns 0 on succes else return error code on failure
 */
static int _xhci_alloc_device(struct usb_device *udev)
{
        struct xhci_ctrl *ctrl = xhci_get_ctrl(udev);
        union xhci_trb *event;
        int ret;

        /*
         * Root hub will be first device to be initailized.
         * If this device is root-hub, don't do any xHC related
         * stuff.
         */
        if (ctrl->rootdev == 0) {
                udev->speed = USB_SPEED_SUPER;
                return 0;
        }

        xhci_queue_command(ctrl, NULL, 0, 0, TRB_ENABLE_SLOT);
        event = xhci_wait_for_event(ctrl, TRB_COMPLETION);
        BUG_ON(GET_COMP_CODE(le32_to_cpu(event->event_cmd.status))
                != COMP_SUCCESS);

        udev->slot_id = TRB_TO_SLOT_ID(le32_to_cpu(event->event_cmd.flags));

        xhci_acknowledge_event(ctrl);

        ret = xhci_alloc_virt_device(ctrl, udev->slot_id);
        if (ret < 0) {
                /*
                 * TODO: Unsuccessful Address Device command shall leave
                 * the slot in default. So, issue Disable Slot command now.
                 */
                puts("Could not allocate xHCI USB device data structures\n");
                return ret;
        }

        return 0;
}

#ifndef CONFIG_DM_USB
int usb_alloc_device(struct usb_device *udev)
{
        return _xhci_alloc_device(udev);
}
#endif

/*
 * Full speed devices may have a max packet size greater than 8 bytes, but the
 * USB core doesn't know that until it reads the first 8 bytes of the
 * descriptor.  If the usb_device's max packet size changes after that point,
 * we need to issue an evaluate context command and wait on it.
 *
 * @param udev  pointer to the Device Data Structure
 * @return returns the status of the xhci_configure_endpoints
 */
int xhci_check_maxpacket(struct usb_device *udev)
{
        struct xhci_ctrl *ctrl = xhci_get_ctrl(udev);
        unsigned int slot_id = udev->slot_id;
        int ep_index = 0;       /* control endpoint */
        struct xhci_container_ctx *in_ctx;
        struct xhci_container_ctx *out_ctx;
        struct xhci_input_control_ctx *ctrl_ctx;
        struct xhci_ep_ctx *ep_ctx;
        int max_packet_size;
        int hw_max_packet_size;
        int ret = 0;

        out_ctx = ctrl->devs[slot_id]->out_ctx;
        xhci_inval_cache((uintptr_t)out_ctx->bytes, out_ctx->size);

        ep_ctx = xhci_get_ep_ctx(ctrl, out_ctx, ep_index);
        hw_max_packet_size = MAX_PACKET_DECODED(le32_to_cpu(ep_ctx->ep_info2));
        max_packet_size = udev->epmaxpacketin[0];
        if (hw_max_packet_size != max_packet_size) {
                debug("Max Packet Size for ep 0 changed.\n");
                debug("Max packet size in usb_device = %d\n", max_packet_size);
                debug("Max packet size in xHCI HW = %d\n", hw_max_packet_size);
                debug("Issuing evaluate context command.\n");

                /* Set up the modified control endpoint 0 */
                xhci_endpoint_copy(ctrl, ctrl->devs[slot_id]->in_ctx,
                                ctrl->devs[slot_id]->out_ctx, ep_index);
                in_ctx = ctrl->devs[slot_id]->in_ctx;
                ep_ctx = xhci_get_ep_ctx(ctrl, in_ctx, ep_index);
                ep_ctx->ep_info2 &= cpu_to_le32(~((0xffff & MAX_PACKET_MASK)
                                                << MAX_PACKET_SHIFT));
                ep_ctx->ep_info2 |= cpu_to_le32(MAX_PACKET(max_packet_size));

                /*
                 * Set up the input context flags for the command
                 * FIXME: This won't work if a non-default control endpoint
                 * changes max packet sizes.
                 */
                ctrl_ctx = xhci_get_input_control_ctx(in_ctx);
                ctrl_ctx->add_flags = cpu_to_le32(EP0_FLAG);
                ctrl_ctx->drop_flags = 0;

                ret = xhci_configure_endpoints(udev, true);
        }
        return ret;
}

/**
 * Clears the Change bits of the Port Status Register
 *
 * @param wValue        request value
 * @param wIndex        request index
 * @param addr          address of posrt status register
 * @param port_status   state of port status register
 * @return none
 */
static void xhci_clear_port_change_bit(u16 wValue,
                u16 wIndex, volatile uint32_t *addr, u32 port_status)
{
        char *port_change_bit;
        u32 status;

        switch (wValue) {
        case USB_PORT_FEAT_C_RESET:
                status = PORT_RC;
                port_change_bit = "reset";
                break;
        case USB_PORT_FEAT_C_CONNECTION:
                status = PORT_CSC;
                port_change_bit = "connect";
                break;
        case USB_PORT_FEAT_C_OVER_CURRENT:
                status = PORT_OCC;
                port_change_bit = "over-current";
                break;
        case USB_PORT_FEAT_C_ENABLE:
                status = PORT_PEC;
                port_change_bit = "enable/disable";
                break;
        case USB_PORT_FEAT_C_SUSPEND:
                status = PORT_PLC;
                port_change_bit = "suspend/resume";
                break;
        default:
                /* Should never happen */
                return;
        }

        /* Change bits are all write 1 to clear */
        xhci_writel(addr, port_status | status);

        port_status = xhci_readl(addr);
        debug("clear port %s change, actual port %d status  = 0x%x\n",
                        port_change_bit, wIndex, port_status);
}

/**
 * Save Read Only (RO) bits and save read/write bits where
 * writing a 0 clears the bit and writing a 1 sets the bit (RWS).
 * For all other types (RW1S, RW1CS, RW, and RZ), writing a '0' has no effect.
 *
 * @param state state of the Port Status and Control Regsiter
 * @return a value that would result in the port being in the
 *         same state, if the value was written to the port
 *         status control register.
 */
static u32 xhci_port_state_to_neutral(u32 state)
{
        /* Save read-only status and port state */
        return (state & XHCI_PORT_RO) | (state & XHCI_PORT_RWS);
}

/**
 * Submits the Requests to the XHCI Host Controller
 *
 * @param udev pointer to the USB device structure
 * @param pipe contains the DIR_IN or OUT , devnum
 * @param buffer buffer to be read/written based on the request
 * @return returns 0 if successful else -1 on failure
 */
static int xhci_submit_root(struct usb_device *udev, unsigned long pipe,
                        void *buffer, struct devrequest *req)
{
        uint8_t tmpbuf[4];
        u16 typeReq;
        void *srcptr = NULL;
        int len, srclen;
        uint32_t reg;
        volatile uint32_t *status_reg;
        struct xhci_ctrl *ctrl = xhci_get_ctrl(udev);
        struct xhci_hccr *hccr = ctrl->hccr;
        struct xhci_hcor *hcor = ctrl->hcor;
        int max_ports = HCS_MAX_PORTS(xhci_readl(&hccr->cr_hcsparams1));

        if ((req->requesttype & USB_RT_PORT) &&
            le16_to_cpu(req->index) > max_ports) {
                printf("The request port(%d) exceeds maximum port number\n",
                       le16_to_cpu(req->index) - 1);
                return -EINVAL;
        }

        status_reg = (volatile uint32_t *)
                     (&hcor->portregs[le16_to_cpu(req->index) - 1].or_portsc);
        srclen = 0;

        typeReq = req->request | req->requesttype << 8;

        switch (typeReq) {
        case DeviceRequest | USB_REQ_GET_DESCRIPTOR:
                switch (le16_to_cpu(req->value) >> 8) {
                case USB_DT_DEVICE:
                        debug("USB_DT_DEVICE request\n");
                        srcptr = &descriptor.device;
                        srclen = 0x12;
                        break;
                case USB_DT_CONFIG:
                        debug("USB_DT_CONFIG config\n");
                        srcptr = &descriptor.config;
                        srclen = 0x19;
                        break;
                case USB_DT_STRING:
                        debug("USB_DT_STRING config\n");
                        switch (le16_to_cpu(req->value) & 0xff) {
                        case 0: /* Language */
                                srcptr = "\4\3\11\4";
                                srclen = 4;
                                break;
                        case 1: /* Vendor String  */
                                srcptr = "\16\3U\0-\0B\0o\0o\0t\0";
                                srclen = 14;
                                break;
                        case 2: /* Product Name */
                                srcptr = "\52\3X\0H\0C\0I\0 "
                                         "\0H\0o\0s\0t\0 "
                                         "\0C\0o\0n\0t\0r\0o\0l\0l\0e\0r\0";
                                srclen = 42;
                                break;
                        default:
                                printf("unknown value DT_STRING %x\n",
                                        le16_to_cpu(req->value));
                                goto unknown;
                        }
                        break;
                default:
                        printf("unknown value %x\n", le16_to_cpu(req->value));
                        goto unknown;
                }
                break;
        case USB_REQ_GET_DESCRIPTOR | ((USB_DIR_IN | USB_RT_HUB) << 8):
                switch (le16_to_cpu(req->value) >> 8) {
                case USB_DT_HUB:
                case USB_DT_SS_HUB:
                        debug("USB_DT_HUB config\n");
                        srcptr = &descriptor.hub;
                        srclen = 0x8;
                        break;
                default:
                        printf("unknown value %x\n", le16_to_cpu(req->value));
                        goto unknown;
                }
                break;
        case USB_REQ_SET_ADDRESS | (USB_RECIP_DEVICE << 8):
                debug("USB_REQ_SET_ADDRESS\n");
                ctrl->rootdev = le16_to_cpu(req->value);
                break;
        case DeviceOutRequest | USB_REQ_SET_CONFIGURATION:
                /* Do nothing */
                break;
        case USB_REQ_GET_STATUS | ((USB_DIR_IN | USB_RT_HUB) << 8):
                tmpbuf[0] = 1;  /* USB_STATUS_SELFPOWERED */
                tmpbuf[1] = 0;
                srcptr = tmpbuf;
                srclen = 2;
                break;
        case USB_REQ_GET_STATUS | ((USB_RT_PORT | USB_DIR_IN) << 8):
                memset(tmpbuf, 0, 4);
                reg = xhci_readl(status_reg);
                if (reg & PORT_CONNECT) {
                        tmpbuf[0] |= USB_PORT_STAT_CONNECTION;
                        switch (reg & DEV_SPEED_MASK) {
                        case XDEV_FS:
                                debug("SPEED = FULLSPEED\n");
                                break;
                        case XDEV_LS:
                                debug("SPEED = LOWSPEED\n");
                                tmpbuf[1] |= USB_PORT_STAT_LOW_SPEED >> 8;
                                break;
                        case XDEV_HS:
                                debug("SPEED = HIGHSPEED\n");
                                tmpbuf[1] |= USB_PORT_STAT_HIGH_SPEED >> 8;
                                break;
                        case XDEV_SS:
                                debug("SPEED = SUPERSPEED\n");
                                tmpbuf[1] |= USB_PORT_STAT_SUPER_SPEED >> 8;
                                break;
                        }
                }
                if (reg & PORT_PE)
                        tmpbuf[0] |= USB_PORT_STAT_ENABLE;
                if ((reg & PORT_PLS_MASK) == XDEV_U3)
                        tmpbuf[0] |= USB_PORT_STAT_SUSPEND;
                if (reg & PORT_OC)
                        tmpbuf[0] |= USB_PORT_STAT_OVERCURRENT;
                if (reg & PORT_RESET)
                        tmpbuf[0] |= USB_PORT_STAT_RESET;
                if (reg & PORT_POWER)
                        /*
                         * XXX: This Port power bit (for USB 3.0 hub)
                         * we are faking in USB 2.0 hub port status;
                         * since there's a change in bit positions in
                         * two:
                         * USB 2.0 port status PP is at position[8]
                         * USB 3.0 port status PP is at position[9]
                         * So, we are still keeping it at position [8]
                         */
                        tmpbuf[1] |= USB_PORT_STAT_POWER >> 8;
                if (reg & PORT_CSC)
                        tmpbuf[2] |= USB_PORT_STAT_C_CONNECTION;
                if (reg & PORT_PEC)
                        tmpbuf[2] |= USB_PORT_STAT_C_ENABLE;
                if (reg & PORT_OCC)
                        tmpbuf[2] |= USB_PORT_STAT_C_OVERCURRENT;
                if (reg & PORT_RC)
                        tmpbuf[2] |= USB_PORT_STAT_C_RESET;

                srcptr = tmpbuf;
                srclen = 4;
                break;
        case USB_REQ_SET_FEATURE | ((USB_DIR_OUT | USB_RT_PORT) << 8):
                reg = xhci_readl(status_reg);
                reg = xhci_port_state_to_neutral(reg);
                switch (le16_to_cpu(req->value)) {
                case USB_PORT_FEAT_ENABLE:
                        reg |= PORT_PE;
                        xhci_writel(status_reg, reg);
                        break;
                case USB_PORT_FEAT_POWER:
                        reg |= PORT_POWER;
                        xhci_writel(status_reg, reg);
                        break;
                case USB_PORT_FEAT_RESET:
                        reg |= PORT_RESET;
                        xhci_writel(status_reg, reg);
                        break;
                default:
                        printf("unknown feature %x\n", le16_to_cpu(req->value));
                        goto unknown;
                }
                break;
        case USB_REQ_CLEAR_FEATURE | ((USB_DIR_OUT | USB_RT_PORT) << 8):
                reg = xhci_readl(status_reg);
                reg = xhci_port_state_to_neutral(reg);
                switch (le16_to_cpu(req->value)) {
                case USB_PORT_FEAT_ENABLE:
                        reg &= ~PORT_PE;
                        break;
                case USB_PORT_FEAT_POWER:
                        reg &= ~PORT_POWER;
                        break;
                case USB_PORT_FEAT_C_RESET:
                case USB_PORT_FEAT_C_CONNECTION:
                case USB_PORT_FEAT_C_OVER_CURRENT:
                case USB_PORT_FEAT_C_ENABLE:
                        xhci_clear_port_change_bit((le16_to_cpu(req->value)),
                                                        le16_to_cpu(req->index),
                                                        status_reg, reg);
                        break;
                default:
                        printf("unknown feature %x\n", le16_to_cpu(req->value));
                        goto unknown;
                }
                xhci_writel(status_reg, reg);
                break;
        default:
                puts("Unknown request\n");
                goto unknown;
        }

        debug("scrlen = %d\n req->length = %d\n",
                srclen, le16_to_cpu(req->length));

        len = min(srclen, (int)le16_to_cpu(req->length));

        if (srcptr != NULL && len > 0)
                memcpy(buffer, srcptr, len);
        else
                debug("Len is 0\n");

        udev->act_len = len;
        udev->status = 0;

        return 0;

unknown:
        udev->act_len = 0;
        udev->status = USB_ST_STALLED;

        return -ENODEV;
}

/**
 * Submits the INT request to XHCI Host cotroller
 *
 * @param udev  pointer to the USB device
 * @param pipe          contains the DIR_IN or OUT , devnum
 * @param buffer        buffer to be read/written based on the request
 * @param length        length of the buffer
 * @param interval      interval of the interrupt
 * @return 0
 */
static int _xhci_submit_int_msg(struct usb_device *udev, unsigned long pipe,
                                void *buffer, int length, int interval)
{
        if (usb_pipetype(pipe) != PIPE_INTERRUPT) {
                printf("non-interrupt pipe (type=%lu)", usb_pipetype(pipe));
                return -EINVAL;
        }

        /*
         * xHCI uses normal TRBs for both bulk and interrupt. When the
         * interrupt endpoint is to be serviced, the xHC will consume
         * (at most) one TD. A TD (comprised of sg list entries) can
         * take several service intervals to transmit.
         */
        return xhci_bulk_tx(udev, pipe, length, buffer);
}

/**
 * submit the BULK type of request to the USB Device
 *
 * @param udev  pointer to the USB device
 * @param pipe          contains the DIR_IN or OUT , devnum
 * @param buffer        buffer to be read/written based on the request
 * @param length        length of the buffer
 * @return returns 0 if successful else -1 on failure
 */
static int _xhci_submit_bulk_msg(struct usb_device *udev, unsigned long pipe,
                                 void *buffer, int length)
{
        if (usb_pipetype(pipe) != PIPE_BULK) {
                printf("non-bulk pipe (type=%lu)", usb_pipetype(pipe));
                return -EINVAL;
        }

        return xhci_bulk_tx(udev, pipe, length, buffer);
}

/**
 * submit the control type of request to the Root hub/Device based on the devnum
 *
 * @param udev  pointer to the USB device
 * @param pipe          contains the DIR_IN or OUT , devnum
 * @param buffer        buffer to be read/written based on the request
 * @param length        length of the buffer
 * @param setup         Request type
 * @param root_portnr   Root port number that this device is on
 * @return returns 0 if successful else -1 on failure
 */
static int _xhci_submit_control_msg(struct usb_device *udev, unsigned long pipe,
                                    void *buffer, int length,
                                    struct devrequest *setup, int root_portnr)
{
        struct xhci_ctrl *ctrl = xhci_get_ctrl(udev);
        int ret = 0;

        if (usb_pipetype(pipe) != PIPE_CONTROL) {
                printf("non-control pipe (type=%lu)", usb_pipetype(pipe));
                return -EINVAL;
        }

        if (usb_pipedevice(pipe) == ctrl->rootdev)
                return xhci_submit_root(udev, pipe, buffer, setup);

        if (setup->request == USB_REQ_SET_ADDRESS &&
           (setup->requesttype & USB_TYPE_MASK) == USB_TYPE_STANDARD)
                return xhci_address_device(udev, root_portnr);

        if (setup->request == USB_REQ_SET_CONFIGURATION &&
           (setup->requesttype & USB_TYPE_MASK) == USB_TYPE_STANDARD) {
                ret = xhci_set_configuration(udev);
                if (ret) {
                        puts("Failed to configure xHCI endpoint\n");
                        return ret;
                }
        }

        return xhci_ctrl_tx(udev, pipe, setup, length, buffer);
}

static int xhci_lowlevel_init(struct xhci_ctrl *ctrl)
{
        struct xhci_hccr *hccr;
        struct xhci_hcor *hcor;
        uint32_t val;
        uint32_t val2;
        uint32_t reg;

        hccr = ctrl->hccr;
        hcor = ctrl->hcor;
        /*
         * Program the Number of Device Slots Enabled field in the CONFIG
         * register with the max value of slots the HC can handle.
         */
        val = (xhci_readl(&hccr->cr_hcsparams1) & HCS_SLOTS_MASK);
        val2 = xhci_readl(&hcor->or_config);
        val |= (val2 & ~HCS_SLOTS_MASK);
        xhci_writel(&hcor->or_config, val);

        /* initializing xhci data structures */
        if (xhci_mem_init(ctrl, hccr, hcor) < 0)
                return -ENOMEM;

        reg = xhci_readl(&hccr->cr_hcsparams1);
        descriptor.hub.bNbrPorts = ((reg & HCS_MAX_PORTS_MASK) >>
                                                HCS_MAX_PORTS_SHIFT);
        printf("Register %x NbrPorts %d\n", reg, descriptor.hub.bNbrPorts);

        /* Port Indicators */
        reg = xhci_readl(&hccr->cr_hccparams);
        if (HCS_INDICATOR(reg))
                put_unaligned(get_unaligned(&descriptor.hub.wHubCharacteristics)
                                | 0x80, &descriptor.hub.wHubCharacteristics);

        /* Port Power Control */
        if (HCC_PPC(reg))
                put_unaligned(get_unaligned(&descriptor.hub.wHubCharacteristics)
                                | 0x01, &descriptor.hub.wHubCharacteristics);

        if (xhci_start(hcor)) {
                xhci_reset(hcor);
                return -ENODEV;
        }

        /* Zero'ing IRQ control register and IRQ pending register */
        xhci_writel(&ctrl->ir_set->irq_control, 0x0);
        xhci_writel(&ctrl->ir_set->irq_pending, 0x0);

        reg = HC_VERSION(xhci_readl(&hccr->cr_capbase));
        printf("USB XHCI %x.%02x\n", reg >> 8, reg & 0xff);

        return 0;
}

static int xhci_lowlevel_stop(struct xhci_ctrl *ctrl)
{
        u32 temp;

        xhci_reset(ctrl->hcor);

        debug("// Disabling event ring interrupts\n");
        temp = xhci_readl(&ctrl->hcor->or_usbsts);
        xhci_writel(&ctrl->hcor->or_usbsts, temp & ~STS_EINT);
        temp = xhci_readl(&ctrl->ir_set->irq_pending);
        xhci_writel(&ctrl->ir_set->irq_pending, ER_IRQ_DISABLE(temp));

        return 0;
}

#ifndef CONFIG_DM_USB
int submit_control_msg(struct usb_device *udev, unsigned long pipe,
                       void *buffer, int length, struct devrequest *setup)
{
        struct usb_device *hop = udev;

        if (hop->parent)
                while (hop->parent->parent)
                        hop = hop->parent;

        return _xhci_submit_control_msg(udev, pipe, buffer, length, setup,
                                        hop->portnr);
}

int submit_bulk_msg(struct usb_device *udev, unsigned long pipe, void *buffer,
                    int length)
{
        return _xhci_submit_bulk_msg(udev, pipe, buffer, length);
}

int submit_int_msg(struct usb_device *udev, unsigned long pipe, void *buffer,
                   int length, int interval)
{
        return _xhci_submit_int_msg(udev, pipe, buffer, length, interval);
}

/**
 * Intialises the XHCI host controller
 * and allocates the necessary data structures
 *
 * @param index index to the host controller data structure
 * @return pointer to the intialised controller
 */
int usb_lowlevel_init(int index, enum usb_init_type init, void **controller)
{
        struct xhci_hccr *hccr;
        struct xhci_hcor *hcor;
        struct xhci_ctrl *ctrl;
        int ret;

        *controller = NULL;

        if (xhci_hcd_init(index, &hccr, (struct xhci_hcor **)&hcor) != 0)
                return -ENODEV;

        if (xhci_reset(hcor) != 0)
                return -ENODEV;

        ctrl = &xhcic[index];

        ctrl->hccr = hccr;
        ctrl->hcor = hcor;

        ret = xhci_lowlevel_init(ctrl);

        if (ret) {
                ctrl->hccr = NULL;
                ctrl->hcor = NULL;
        } else {
                *controller = &xhcic[index];
        }

        return ret;
}

/**
 * Stops the XHCI host controller
 * and cleans up all the related data structures
 *
 * @param index index to the host controller data structure
 * @return none
 */
int usb_lowlevel_stop(int index)
{
        struct xhci_ctrl *ctrl = (xhcic + index);

        if (ctrl->hcor) {
                xhci_lowlevel_stop(ctrl);
                xhci_hcd_stop(index);
                xhci_cleanup(ctrl);
        }

        return 0;
}
#endif /* CONFIG_DM_USB */

#ifdef CONFIG_DM_USB

static int xhci_submit_control_msg(struct udevice *dev, struct usb_device *udev,
                                   unsigned long pipe, void *buffer, int length,
                                   struct devrequest *setup)
{
        struct usb_device *uhop;
        struct udevice *hub;
        int root_portnr = 0;

        debug("%s: dev='%s', udev=%p, udev->dev='%s', portnr=%d\n", __func__,
              dev->name, udev, udev->dev->name, udev->portnr);
        hub = udev->dev;
        if (device_get_uclass_id(hub) == UCLASS_USB_HUB) {
                /* Figure out our port number on the root hub */
                if (usb_hub_is_root_hub(hub)) {
                        root_portnr = udev->portnr;
                } else {
                        while (!usb_hub_is_root_hub(hub->parent))
                                hub = hub->parent;
                        uhop = dev_get_parent_priv(hub);
                        root_portnr = uhop->portnr;
                }
        }
/*
        struct usb_device *hop = udev;

        if (hop->parent)
                while (hop->parent->parent)
                        hop = hop->parent;
*/
        return _xhci_submit_control_msg(udev, pipe, buffer, length, setup,
                                        root_portnr);
}

static int xhci_submit_bulk_msg(struct udevice *dev, struct usb_device *udev,
                                unsigned long pipe, void *buffer, int length)
{
        debug("%s: dev='%s', udev=%p\n", __func__, dev->name, udev);
        return _xhci_submit_bulk_msg(udev, pipe, buffer, length);
}

static int xhci_submit_int_msg(struct udevice *dev, struct usb_device *udev,
                               unsigned long pipe, void *buffer, int length,
                               int interval)
{
        debug("%s: dev='%s', udev=%p\n", __func__, dev->name, udev);
        return _xhci_submit_int_msg(udev, pipe, buffer, length, interval);
}

static int xhci_alloc_device(struct udevice *dev, struct usb_device *udev)
{
        debug("%s: dev='%s', udev=%p\n", __func__, dev->name, udev);
        return _xhci_alloc_device(udev);
}

static int xhci_update_hub_device(struct udevice *dev, struct usb_device *udev)
{
        struct xhci_ctrl *ctrl = dev_get_priv(dev);
        struct usb_hub_device *hub = dev_get_uclass_priv(udev->dev);
        struct xhci_virt_device *virt_dev;
        struct xhci_input_control_ctx *ctrl_ctx;
        struct xhci_container_ctx *out_ctx;
        struct xhci_container_ctx *in_ctx;
        struct xhci_slot_ctx *slot_ctx;
        int slot_id = udev->slot_id;
        unsigned think_time;

        debug("%s: dev='%s', udev=%p\n", __func__, dev->name, udev);

        /* Ignore root hubs */
        if (usb_hub_is_root_hub(udev->dev))
                return 0;

        virt_dev = ctrl->devs[slot_id];
        BUG_ON(!virt_dev);

        out_ctx = virt_dev->out_ctx;
        in_ctx = virt_dev->in_ctx;

        ctrl_ctx = xhci_get_input_control_ctx(in_ctx);
        /* Initialize the input context control */
        ctrl_ctx->add_flags |= cpu_to_le32(SLOT_FLAG);
        ctrl_ctx->drop_flags = 0;

        xhci_inval_cache((uintptr_t)out_ctx->bytes, out_ctx->size);

        /* slot context */
        xhci_slot_copy(ctrl, in_ctx, out_ctx);
        slot_ctx = xhci_get_slot_ctx(ctrl, in_ctx);

        /* Update hub related fields */
        slot_ctx->dev_info |= cpu_to_le32(DEV_HUB);
        if (hub->tt.multi && udev->speed == USB_SPEED_HIGH)
                slot_ctx->dev_info |= cpu_to_le32(DEV_MTT);
        slot_ctx->dev_info2 |= cpu_to_le32(XHCI_MAX_PORTS(udev->maxchild));
        /*
         * Set TT think time - convert from ns to FS bit times.
         * Note 8 FS bit times == (8 bits / 12000000 bps) ~= 666ns
         *
         * 0 =  8 FS bit times, 1 = 16 FS bit times,
         * 2 = 24 FS bit times, 3 = 32 FS bit times.
         *
         * This field shall be 0 if the device is not a high-spped hub.
         */
        think_time = hub->tt.think_time;
        if (think_time != 0)
                think_time = (think_time / 666) - 1;
        if (udev->speed == USB_SPEED_HIGH)
                slot_ctx->tt_info |= cpu_to_le32(TT_THINK_TIME(think_time));

        return xhci_configure_endpoints(udev, false);
}

static int xhci_get_max_xfer_size(struct udevice *dev, size_t *size)
{
        /*
         * xHCD allocates one segment which includes 64 TRBs for each endpoint
         * and the last TRB in this segment is configured as a link TRB to form
         * a TRB ring. Each TRB can transfer up to 64K bytes, however data
         * buffers referenced by transfer TRBs shall not span 64KB boundaries.
         * Hence the maximum number of TRBs we can use in one transfer is 62.
         */
        *size = (TRBS_PER_SEGMENT - 2) * TRB_MAX_BUFF_SIZE;

        return 0;
}

int xhci_register(struct udevice *dev, struct xhci_hccr *hccr,
                  struct xhci_hcor *hcor)
{
        struct xhci_ctrl *ctrl = dev_get_priv(dev);
        struct usb_bus_priv *priv = dev_get_uclass_priv(dev);
        int ret;

        debug("%s: dev='%s', ctrl=%p, hccr=%p, hcor=%p\n", __func__, dev->name,
              ctrl, hccr, hcor);

        ctrl->dev = dev;

        /*
         * XHCI needs to issue a Address device command to setup
         * proper device context structures, before it can interact
         * with the device. So a get_descriptor will fail before any
         * of that is done for XHCI unlike EHCI.
         */
        priv->desc_before_addr = false;

        ret = xhci_reset(hcor);
        if (ret)
                goto err;

        ctrl->hccr = hccr;
        ctrl->hcor = hcor;
        ret = xhci_lowlevel_init(ctrl);
        if (ret)
                goto err;

        return 0;
err:
        free(ctrl);
        debug("%s: failed, ret=%d\n", __func__, ret);
        return ret;
}

int xhci_deregister(struct udevice *dev)
{
        struct xhci_ctrl *ctrl = dev_get_priv(dev);

        xhci_lowlevel_stop(ctrl);
        xhci_cleanup(ctrl);

        return 0;
}

struct dm_usb_ops xhci_usb_ops = {
        .control = xhci_submit_control_msg,
        .bulk = xhci_submit_bulk_msg,
        .interrupt = xhci_submit_int_msg,
        .alloc_device = xhci_alloc_device,
        .update_hub_device = xhci_update_hub_device,
        .get_max_xfer_size  = xhci_get_max_xfer_size,
};

#endif