drivers/usb/phy/Kconfig

   1 #
   2 # Physical Layer USB driver configuration
   3 #
   4 menu "USB Physical Layer drivers"
   5
   6 config USB_PHY
   7         def_bool n
   8
   9 #
  10 # USB Transceiver Drivers
  11 #
  12 config AB8500_USB
  13         tristate "AB8500 USB Transceiver Driver"
  14         depends on AB8500_CORE
  15         select USB_PHY
  16         help
  17           Enable this to support the USB OTG transceiver in AB8500 chip.
  18           This transceiver supports high and full speed devices plus,
  19           in host mode, low speed.
  20
  21 config FSL_USB2_OTG
  22         bool "Freescale USB OTG Transceiver Driver"
  23         depends on USB_EHCI_FSL && USB_FSL_USB2 && PM_RUNTIME
  24         select USB_OTG
  25         select USB_PHY
  26         help
  27           Enable this to support Freescale USB OTG transceiver.
  28
  29 config ISP1301_OMAP
  30         tristate "Philips ISP1301 with OMAP OTG"
  31         depends on I2C && ARCH_OMAP_OTG
  32         select USB_PHY
  33         help
  34           If you say yes here you get support for the Philips ISP1301
  35           USB-On-The-Go transceiver working with the OMAP OTG controller.
  36           The ISP1301 is a full speed USB  transceiver which is used in
  37           products including H2, H3, and H4 development boards for Texas
  38           Instruments OMAP processors.
  39
  40           This driver can also be built as a module.  If so, the module
  41           will be called isp1301_omap.
  42
  43 config MV_U3D_PHY
  44         bool "Marvell USB 3.0 PHY controller Driver"
  45         depends on CPU_MMP3
  46         select USB_PHY
  47         help
  48           Enable this to support Marvell USB 3.0 phy controller for Marvell
  49           SoC.
  50
  51 config NOP_USB_XCEIV
  52         tristate "NOP USB Transceiver Driver"
  53         select USB_PHY
  54         help
  55           This driver is to be used by all the usb transceiver which are either
  56           built-in with usb ip or which are autonomous and doesn't require any
  57           phy programming such as ISP1x04 etc.
  58
  59 config OMAP_CONTROL_USB
  60         tristate "OMAP CONTROL USB Driver"
  61         help
  62           Enable this to add support for the USB part present in the control
  63           module. This driver has API to power on the USB2 PHY and to write to
  64           the mailbox. The mailbox is present only in omap4 and the register to
  65           power on the USB2 PHY is present in OMAP4 and OMAP5. OMAP5 has an
  66           additional register to power on USB3 PHY.
  67
  68 config OMAP_USB2
  69         tristate "OMAP USB2 PHY Driver"
  70         depends on ARCH_OMAP2PLUS
  71         select OMAP_CONTROL_USB
  72         select USB_PHY
  73         help
  74           Enable this to support the transceiver that is part of SOC. This
  75           driver takes care of all the PHY functionality apart from comparator.
  76           The USB OTG controller communicates with the comparator using this
  77           driver.
  78
  79 config OMAP_USB3
  80         tristate "OMAP USB3 PHY Driver"
  81         select OMAP_CONTROL_USB
  82         select USB_PHY
  83         help
  84           Enable this to support the USB3 PHY that is part of SOC. This
  85           driver takes care of all the PHY functionality apart from comparator.
  86           This driver interacts with the "OMAP Control USB Driver" to power
  87           on/off the PHY.
  88
  89 config AM335X_CONTROL_USB
  90         tristate
  91
  92 config AM335X_PHY_USB
  93         tristate "AM335x USB PHY Driver"
  94         select USB_PHY
  95         select AM335X_CONTROL_USB
  96         select NOP_USB_XCEIV
  97         help
  98           This driver provides PHY support for that phy which part for the
  99           AM335x SoC.
 100
 101 config SAMSUNG_USBPHY
 102         tristate
 103         help
 104           Enable this to support Samsung USB phy helper driver for Samsung SoCs.
 105           This driver provides common interface to interact, for Samsung USB 2.0 PHY
 106           driver and later for Samsung USB 3.0 PHY driver.
 107
 108 config SAMSUNG_USB2PHY
 109         tristate "Samsung USB 2.0 PHY controller Driver"
 110         select SAMSUNG_USBPHY
 111         select USB_PHY
 112         help
 113           Enable this to support Samsung USB 2.0 (High Speed) PHY controller
 114           driver for Samsung SoCs.
 115
 116 config SAMSUNG_USB3PHY
 117         tristate "Samsung USB 3.0 PHY controller Driver"
 118         select SAMSUNG_USBPHY
 119         select USB_PHY
 120         help
 121           Enable this to support Samsung USB 3.0 (Super Speed) phy controller
 122           for samsung SoCs.
 123
 124 config TWL4030_USB
 125         tristate "TWL4030 USB Transceiver Driver"
 126         depends on TWL4030_CORE && REGULATOR_TWL4030 && USB_MUSB_OMAP2PLUS
 127         select USB_PHY
 128         help
 129           Enable this to support the USB OTG transceiver on TWL4030
 130           family chips (including the TWL5030 and TPS659x0 devices).
 131           This transceiver supports high and full speed devices plus,
 132           in host mode, low speed.
 133
 134 config TWL6030_USB
 135         tristate "TWL6030 USB Transceiver Driver"
 136         depends on TWL4030_CORE && OMAP_USB2 && USB_MUSB_OMAP2PLUS
 137         help
 138           Enable this to support the USB OTG transceiver on TWL6030
 139           family chips. This TWL6030 transceiver has the VBUS and ID GND
 140           and OTG SRP events capabilities. For all other transceiver functionality
 141           UTMI PHY is embedded in OMAP4430. The internal PHY configurations APIs
 142           are hooked to this driver through platform_data structure.
 143           The definition of internal PHY APIs are in the mach-omap2 layer.
 144
 145 config USB_GPIO_VBUS
 146         tristate "GPIO based peripheral-only VBUS sensing 'transceiver'"
 147         depends on GPIOLIB
 148         select USB_PHY
 149         help
 150           Provides simple GPIO VBUS sensing for controllers with an
 151           internal transceiver via the usb_phy interface, and
 152           optionally control of a D+ pullup GPIO as well as a VBUS
 153           current limit regulator.
 154
 155 config USB_ISP1301
 156         tristate "NXP ISP1301 USB transceiver support"
 157         depends on USB || USB_GADGET
 158         depends on I2C
 159         select USB_PHY
 160         help
 161           Say Y here to add support for the NXP ISP1301 USB transceiver driver.
 162           This chip is typically used as USB transceiver for USB host, gadget
 163           and OTG drivers (to be selected separately).
 164
 165           To compile this driver as a module, choose M here: the
 166           module will be called isp1301.
 167
 168 config USB_MSM_OTG
 169         tristate "OTG support for Qualcomm on-chip USB controller"
 170         depends on (USB || USB_GADGET) && ARCH_MSM
 171         select USB_PHY
 172         help
 173           Enable this to support the USB OTG transceiver on MSM chips. It
 174           handles PHY initialization, clock management, and workarounds
 175           required after resetting the hardware and power management.
 176           This driver is required even for peripheral only or host only
 177           mode configurations.
 178           This driver is not supported on boards like trout which
 179           has an external PHY.
 180
 181 config USB_MV_OTG
 182         tristate "Marvell USB OTG support"
 183         depends on USB_EHCI_MV && USB_MV_UDC && PM_RUNTIME
 184         select USB_OTG
 185         select USB_PHY
 186         help
 187           Say Y here if you want to build Marvell USB OTG transciever
 188           driver in kernel (including PXA and MMP series). This driver
 189           implements role switch between EHCI host driver and gadget driver.
 190
 191           To compile this driver as a module, choose M here.
 192
 193 config USB_MXS_PHY
 194         tristate "Freescale MXS USB PHY support"
 195         depends on ARCH_MXC || ARCH_MXS
 196         select STMP_DEVICE
 197         select USB_PHY
 198         help
 199           Enable this to support the Freescale MXS USB PHY.
 200
 201           MXS Phy is used by some of the i.MX SoCs, for example imx23/28/6x.
 202
 203 config USB_RCAR_PHY
 204         tristate "Renesas R-Car USB PHY support"
 205         depends on USB || USB_GADGET
 206         select USB_PHY
 207         help
 208           Say Y here to add support for the Renesas R-Car USB common PHY driver.
 209           This chip is typically used as USB PHY for USB host, gadget.
 210           This driver supports R8A7778 and R8A7779.
 211
 212           To compile this driver as a module, choose M here: the
 213           module will be called phy-rcar-usb.
 214
 215 config USB_ULPI
 216         bool "Generic ULPI Transceiver Driver"
 217         depends on ARM
 218         help
 219           Enable this to support ULPI connected USB OTG transceivers which
 220           are likely found on embedded boards.
 221
 222 config USB_ULPI_VIEWPORT
 223         bool
 224         depends on USB_ULPI
 225         help
 226           Provides read/write operations to the ULPI phy register set for
 227           controllers with a viewport register (e.g. Chipidea/ARC controllers).
 228
 229 endmenu