]> git.ipfire.org Git - thirdparty/kernel/stable.git/blob - drivers/watchdog/sa1100_wdt.c
Merge tag 'spdx-5.2-rc2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh...
[thirdparty/kernel/stable.git] / drivers / watchdog / sa1100_wdt.c
1 /*
2 * Watchdog driver for the SA11x0/PXA2xx
3 *
4 * (c) Copyright 2000 Oleg Drokin <green@crimea.edu>
5 * Based on SoftDog driver by Alan Cox <alan@lxorguk.ukuu.org.uk>
6 *
7 * This program is free software; you can redistribute it and/or
8 * modify it under the terms of the GNU General Public License
9 * as published by the Free Software Foundation; either version
10 * 2 of the License, or (at your option) any later version.
11 *
12 * Neither Oleg Drokin nor iXcelerator.com admit liability nor provide
13 * warranty for any of this software. This material is provided
14 * "AS-IS" and at no charge.
15 *
16 * (c) Copyright 2000 Oleg Drokin <green@crimea.edu>
17 *
18 * 27/11/2000 Initial release
19 */
20
21 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
22
23 #include <linux/module.h>
24 #include <linux/moduleparam.h>
25 #include <linux/clk.h>
26 #include <linux/types.h>
27 #include <linux/kernel.h>
28 #include <linux/fs.h>
29 #include <linux/miscdevice.h>
30 #include <linux/watchdog.h>
31 #include <linux/init.h>
32 #include <linux/io.h>
33 #include <linux/bitops.h>
34 #include <linux/uaccess.h>
35 #include <linux/timex.h>
36
37 #ifdef CONFIG_ARCH_PXA
38 #include <mach/regs-ost.h>
39 #endif
40
41 #include <mach/reset.h>
42 #include <mach/hardware.h>
43
44 static unsigned long oscr_freq;
45 static unsigned long sa1100wdt_users;
46 static unsigned int pre_margin;
47 static int boot_status;
48
49 /*
50 * Allow only one person to hold it open
51 */
52 static int sa1100dog_open(struct inode *inode, struct file *file)
53 {
54 if (test_and_set_bit(1, &sa1100wdt_users))
55 return -EBUSY;
56
57 /* Activate SA1100 Watchdog timer */
58 writel_relaxed(readl_relaxed(OSCR) + pre_margin, OSMR3);
59 writel_relaxed(OSSR_M3, OSSR);
60 writel_relaxed(OWER_WME, OWER);
61 writel_relaxed(readl_relaxed(OIER) | OIER_E3, OIER);
62 return stream_open(inode, file);
63 }
64
65 /*
66 * The watchdog cannot be disabled.
67 *
68 * Previous comments suggested that turning off the interrupt by
69 * clearing OIER[E3] would prevent the watchdog timing out but this
70 * does not appear to be true (at least on the PXA255).
71 */
72 static int sa1100dog_release(struct inode *inode, struct file *file)
73 {
74 pr_crit("Device closed - timer will not stop\n");
75 clear_bit(1, &sa1100wdt_users);
76 return 0;
77 }
78
79 static ssize_t sa1100dog_write(struct file *file, const char __user *data,
80 size_t len, loff_t *ppos)
81 {
82 if (len)
83 /* Refresh OSMR3 timer. */
84 writel_relaxed(readl_relaxed(OSCR) + pre_margin, OSMR3);
85 return len;
86 }
87
88 static const struct watchdog_info ident = {
89 .options = WDIOF_CARDRESET | WDIOF_SETTIMEOUT
90 | WDIOF_KEEPALIVEPING,
91 .identity = "SA1100/PXA255 Watchdog",
92 .firmware_version = 1,
93 };
94
95 static long sa1100dog_ioctl(struct file *file, unsigned int cmd,
96 unsigned long arg)
97 {
98 int ret = -ENOTTY;
99 int time;
100 void __user *argp = (void __user *)arg;
101 int __user *p = argp;
102
103 switch (cmd) {
104 case WDIOC_GETSUPPORT:
105 ret = copy_to_user(argp, &ident,
106 sizeof(ident)) ? -EFAULT : 0;
107 break;
108
109 case WDIOC_GETSTATUS:
110 ret = put_user(0, p);
111 break;
112
113 case WDIOC_GETBOOTSTATUS:
114 ret = put_user(boot_status, p);
115 break;
116
117 case WDIOC_KEEPALIVE:
118 writel_relaxed(readl_relaxed(OSCR) + pre_margin, OSMR3);
119 ret = 0;
120 break;
121
122 case WDIOC_SETTIMEOUT:
123 ret = get_user(time, p);
124 if (ret)
125 break;
126
127 if (time <= 0 || (oscr_freq * (long long)time >= 0xffffffff)) {
128 ret = -EINVAL;
129 break;
130 }
131
132 pre_margin = oscr_freq * time;
133 writel_relaxed(readl_relaxed(OSCR) + pre_margin, OSMR3);
134 /*fall through*/
135
136 case WDIOC_GETTIMEOUT:
137 ret = put_user(pre_margin / oscr_freq, p);
138 break;
139 }
140 return ret;
141 }
142
143 static const struct file_operations sa1100dog_fops = {
144 .owner = THIS_MODULE,
145 .llseek = no_llseek,
146 .write = sa1100dog_write,
147 .unlocked_ioctl = sa1100dog_ioctl,
148 .open = sa1100dog_open,
149 .release = sa1100dog_release,
150 };
151
152 static struct miscdevice sa1100dog_miscdev = {
153 .minor = WATCHDOG_MINOR,
154 .name = "watchdog",
155 .fops = &sa1100dog_fops,
156 };
157
158 static int margin __initdata = 60; /* (secs) Default is 1 minute */
159 static struct clk *clk;
160
161 static int __init sa1100dog_init(void)
162 {
163 int ret;
164
165 clk = clk_get(NULL, "OSTIMER0");
166 if (IS_ERR(clk)) {
167 pr_err("SA1100/PXA2xx Watchdog Timer: clock not found: %d\n",
168 (int) PTR_ERR(clk));
169 return PTR_ERR(clk);
170 }
171
172 ret = clk_prepare_enable(clk);
173 if (ret) {
174 pr_err("SA1100/PXA2xx Watchdog Timer: clock failed to prepare+enable: %d\n",
175 ret);
176 goto err;
177 }
178
179 oscr_freq = clk_get_rate(clk);
180
181 /*
182 * Read the reset status, and save it for later. If
183 * we suspend, RCSR will be cleared, and the watchdog
184 * reset reason will be lost.
185 */
186 boot_status = (reset_status & RESET_STATUS_WATCHDOG) ?
187 WDIOF_CARDRESET : 0;
188 pre_margin = oscr_freq * margin;
189
190 ret = misc_register(&sa1100dog_miscdev);
191 if (ret == 0) {
192 pr_info("SA1100/PXA2xx Watchdog Timer: timer margin %d sec\n",
193 margin);
194 return 0;
195 }
196
197 clk_disable_unprepare(clk);
198 err:
199 clk_put(clk);
200 return ret;
201 }
202
203 static void __exit sa1100dog_exit(void)
204 {
205 misc_deregister(&sa1100dog_miscdev);
206 clk_disable_unprepare(clk);
207 clk_put(clk);
208 }
209
210 module_init(sa1100dog_init);
211 module_exit(sa1100dog_exit);
212
213 MODULE_AUTHOR("Oleg Drokin <green@crimea.edu>");
214 MODULE_DESCRIPTION("SA1100/PXA2xx Watchdog");
215
216 module_param(margin, int, 0);
217 MODULE_PARM_DESC(margin, "Watchdog margin in seconds (default 60s)");
218
219 MODULE_LICENSE("GPL");