examples/standalone/smc91111_eeprom.c

   1 /*
   2  * (C) Copyright 2004
   3  * Robin Getz rgetz@blacfin.uclinux.org
   4  *
   5  * SPDX-License-Identifier:     GPL-2.0+
   6  *
   7  * Heavily borrowed from the following peoples GPL'ed software:
   8  *  - Wolfgang Denk, DENX Software Engineering, wd@denx.de
   9  *       Das U-boot
  10  *  - Ladislav Michl ladis@linux-mips.org
  11  *       A rejected patch on the U-Boot mailing list
  12  */
  13
  14 #include <common.h>
  15 #include <exports.h>
  16 #include "../drivers/net/smc91111.h"
  17
  18 #ifndef SMC91111_EEPROM_INIT
  19 # define SMC91111_EEPROM_INIT()
  20 #endif
  21
  22 #define SMC_BASE_ADDRESS CONFIG_SMC91111_BASE
  23 #define EEPROM          0x1
  24 #define MAC             0x2
  25 #define UNKNOWN         0x4
  26
  27 void dump_reg (struct eth_device *dev);
  28 void dump_eeprom (struct eth_device *dev);
  29 int write_eeprom_reg (struct eth_device *dev, int value, int reg);
  30 void copy_from_eeprom (struct eth_device *dev);
  31 void print_MAC (struct eth_device *dev);
  32 int read_eeprom_reg (struct eth_device *dev, int reg);
  33 void print_macaddr (struct eth_device *dev);
  34
  35 int smc91111_eeprom (int argc, char * const argv[])
  36 {
  37         int c, i, j, done, line, reg, value, start, what;
  38         char input[50];
  39
  40         struct eth_device dev;
  41         dev.iobase = CONFIG_SMC91111_BASE;
  42
  43         /* Print the ABI version */
  44         app_startup (argv);
  45         if (XF_VERSION != (int) get_version ()) {
  46                 printf ("Expects ABI version %d\n", XF_VERSION);
  47                 printf ("Actual U-Boot ABI version %d\n",
  48                         (int) get_version ());
  49                 printf ("Can't run\n\n");
  50                 return (0);
  51         }
  52
  53         SMC91111_EEPROM_INIT();
  54
  55         if ((SMC_inw (&dev, BANK_SELECT) & 0xFF00) != 0x3300) {
  56                 printf ("Can't find SMSC91111\n");
  57                 return (0);
  58         }
  59
  60         done = 0;
  61         what = UNKNOWN;
  62         printf ("\n");
  63         while (!done) {
  64                 /* print the prompt */
  65                 printf ("SMC91111> ");
  66                 line = 0;
  67                 i = 0;
  68                 start = 1;
  69                 while (!line) {
  70                         /* Wait for a keystroke */
  71                         while (!tstc ());
  72
  73                         c = getc ();
  74                         /* Make Uppercase */
  75                         if (c >= 'Z')
  76                                 c -= ('a' - 'A');
  77                         /* printf(" |%02x| ",c); */
  78
  79                         switch (c) {
  80                         case '\r':      /* Enter                */
  81                         case '\n':
  82                                 input[i] = 0;
  83                                 puts ("\r\n");
  84                                 line = 1;
  85                                 break;
  86                         case '\0':      /* nul                  */
  87                                 continue;
  88
  89                         case 0x03:      /* ^C - break           */
  90                                 input[0] = 0;
  91                                 i = 0;
  92                                 line = 1;
  93                                 done = 1;
  94                                 break;
  95
  96                         case 0x5F:
  97                         case 0x08:      /* ^H  - backspace      */
  98                         case 0x7F:      /* DEL - backspace      */
  99                                 if (i > 0) {
 100                                         puts ("\b \b");
 101                                         i--;
 102                                 }
 103                                 break;
 104                         default:
 105                                 if (start) {
 106                                         if ((c == 'W') || (c == 'D')
 107                                             || (c == 'M') || (c == 'C')
 108                                             || (c == 'P')) {
 109                                                 putc (c);
 110                                                 input[i] = c;
 111                                                 if (i <= 45)
 112                                                         i++;
 113                                                 start = 0;
 114                                         }
 115                                 } else {
 116                                         if ((c >= '0' && c <= '9')
 117                                             || (c >= 'A' && c <= 'F')
 118                                             || (c == 'E') || (c == 'M')
 119                                             || (c == ' ')) {
 120                                                 putc (c);
 121                                                 input[i] = c;
 122                                                 if (i <= 45)
 123                                                         i++;
 124                                                 break;
 125                                         }
 126                                 }
 127                                 break;
 128                         }
 129                 }
 130
 131                 for (; i < 49; i++)
 132                         input[i] = 0;
 133
 134                 switch (input[0]) {
 135                 case ('W'):
 136                         /* Line should be w reg value */
 137                         i = 0;
 138                         reg = 0;
 139                         value = 0;
 140                         /* Skip to the next space or end) */
 141                         while ((input[i] != ' ') && (input[i] != 0))
 142                                 i++;
 143
 144                         if (input[i] != 0)
 145                                 i++;
 146
 147                         /* Are we writing to EEPROM or MAC */
 148                         switch (input[i]) {
 149                         case ('E'):
 150                                 what = EEPROM;
 151                                 break;
 152                         case ('M'):
 153                                 what = MAC;
 154                                 break;
 155                         default:
 156                                 what = UNKNOWN;
 157                                 break;
 158                         }
 159
 160                         /* skip to the next space or end */
 161                         while ((input[i] != ' ') && (input[i] != 0))
 162                                 i++;
 163                         if (input[i] != 0)
 164                                 i++;
 165
 166                         /* Find register to write into */
 167                         j = 0;
 168                         while ((input[i] != ' ') && (input[i] != 0)) {
 169                                 j = input[i] - 0x30;
 170                                 if (j >= 0xA) {
 171                                         j -= 0x07;
 172                                 }
 173                                 reg = (reg * 0x10) + j;
 174                                 i++;
 175                         }
 176
 177                         while ((input[i] != ' ') && (input[i] != 0))
 178                                 i++;
 179
 180                         if (input[i] != 0)
 181                                 i++;
 182                         else
 183                                 what = UNKNOWN;
 184
 185                         /* Get the value to write */
 186                         j = 0;
 187                         while ((input[i] != ' ') && (input[i] != 0)) {
 188                                 j = input[i] - 0x30;
 189                                 if (j >= 0xA) {
 190                                         j -= 0x07;
 191                                 }
 192                                 value = (value * 0x10) + j;
 193                                 i++;
 194                         }
 195
 196                         switch (what) {
 197                         case 1:
 198                                 printf ("Writing EEPROM register %02x with %04x\n", reg, value);
 199                                 write_eeprom_reg (&dev, value, reg);
 200                                 break;
 201                         case 2:
 202                                 printf ("Writing MAC register bank %i, reg %02x with %04x\n", reg >> 4, reg & 0xE, value);
 203                                 SMC_SELECT_BANK (&dev, reg >> 4);
 204                                 SMC_outw (&dev, value, reg & 0xE);
 205                                 break;
 206                         default:
 207                                 printf ("Wrong\n");
 208                                 break;
 209                         }
 210                         break;
 211                 case ('D'):
 212                         dump_eeprom (&dev);
 213                         break;
 214                 case ('M'):
 215                         dump_reg (&dev);
 216                         break;
 217                 case ('C'):
 218                         copy_from_eeprom (&dev);
 219                         break;
 220                 case ('P'):
 221                         print_macaddr (&dev);
 222                         break;
 223                 default:
 224                         break;
 225                 }
 226
 227         }
 228
 229         return (0);
 230 }
 231
 232 void copy_from_eeprom (struct eth_device *dev)
 233 {
 234         int i;
 235
 236         SMC_SELECT_BANK (dev, 1);
 237         SMC_outw (dev, (SMC_inw (dev, CTL_REG) & !CTL_EEPROM_SELECT) |
 238                 CTL_RELOAD, CTL_REG);
 239         i = 100;
 240         while ((SMC_inw (dev, CTL_REG) & CTL_RELOAD) && --i)
 241                 udelay (100);
 242         if (i == 0) {
 243                 printf ("Timeout Refreshing EEPROM registers\n");
 244         } else {
 245                 printf ("EEPROM contents copied to MAC\n");
 246         }
 247
 248 }
 249
 250 void print_macaddr (struct eth_device *dev)
 251 {
 252         int i, j, k, mac[6];
 253
 254         printf ("Current MAC Address in SMSC91111 ");
 255         SMC_SELECT_BANK (dev, 1);
 256         for (i = 0; i < 5; i++) {
 257                 printf ("%02x:", SMC_inb (dev, ADDR0_REG + i));
 258         }
 259
 260         printf ("%02x\n", SMC_inb (dev, ADDR0_REG + 5));
 261
 262         i = 0;
 263         for (j = 0x20; j < 0x23; j++) {
 264                 k = read_eeprom_reg (dev, j);
 265                 mac[i] = k & 0xFF;
 266                 i++;
 267                 mac[i] = k >> 8;
 268                 i++;
 269         }
 270
 271         printf ("Current MAC Address in EEPROM    ");
 272         for (i = 0; i < 5; i++)
 273                 printf ("%02x:", mac[i]);
 274         printf ("%02x\n", mac[5]);
 275
 276 }
 277 void dump_eeprom (struct eth_device *dev)
 278 {
 279         int j, k;
 280
 281         printf ("IOS2-0    ");
 282         for (j = 0; j < 8; j++) {
 283                 printf ("%03x     ", j);
 284         }
 285         printf ("\n");
 286
 287         for (k = 0; k < 4; k++) {
 288                 if (k == 0)
 289                         printf ("CONFIG ");
 290                 if (k == 1)
 291                         printf ("BASE   ");
 292                 if ((k == 2) || (k == 3))
 293                         printf ("       ");
 294                 for (j = 0; j < 0x20; j += 4) {
 295                         printf ("%02x:%04x ", j + k,
 296                                 read_eeprom_reg (dev, j + k));
 297                 }
 298                 printf ("\n");
 299         }
 300
 301         for (j = 0x20; j < 0x40; j++) {
 302                 if ((j & 0x07) == 0)
 303                         printf ("\n");
 304                 printf ("%02x:%04x ", j, read_eeprom_reg (dev, j));
 305         }
 306         printf ("\n");
 307
 308 }
 309
 310 int read_eeprom_reg (struct eth_device *dev, int reg)
 311 {
 312         int timeout;
 313
 314         SMC_SELECT_BANK (dev, 2);
 315         SMC_outw (dev, reg, PTR_REG);
 316
 317         SMC_SELECT_BANK (dev, 1);
 318         SMC_outw (dev, SMC_inw (dev, CTL_REG) | CTL_EEPROM_SELECT |
 319                 CTL_RELOAD, CTL_REG);
 320         timeout = 100;
 321         while ((SMC_inw (dev, CTL_REG) & CTL_RELOAD) && --timeout)
 322                 udelay (100);
 323         if (timeout == 0) {
 324                 printf ("Timeout Reading EEPROM register %02x\n", reg);
 325                 return 0;
 326         }
 327
 328         return SMC_inw (dev, GP_REG);
 329
 330 }
 331
 332 int write_eeprom_reg (struct eth_device *dev, int value, int reg)
 333 {
 334         int timeout;
 335
 336         SMC_SELECT_BANK (dev, 2);
 337         SMC_outw (dev, reg, PTR_REG);
 338
 339         SMC_SELECT_BANK (dev, 1);
 340         SMC_outw (dev, value, GP_REG);
 341         SMC_outw (dev, SMC_inw (dev, CTL_REG) | CTL_EEPROM_SELECT |
 342                 CTL_STORE, CTL_REG);
 343         timeout = 100;
 344         while ((SMC_inw (dev, CTL_REG) & CTL_STORE) && --timeout)
 345                 udelay (100);
 346         if (timeout == 0) {
 347                 printf ("Timeout Writing EEPROM register %02x\n", reg);
 348                 return 0;
 349         }
 350
 351         return 1;
 352
 353 }
 354
 355 void dump_reg (struct eth_device *dev)
 356 {
 357         int i, j;
 358
 359         printf ("    ");
 360         for (j = 0; j < 4; j++) {
 361                 printf ("Bank%i ", j);
 362         }
 363         printf ("\n");
 364         for (i = 0; i < 0xF; i += 2) {
 365                 printf ("%02x  ", i);
 366                 for (j = 0; j < 4; j++) {
 367                         SMC_SELECT_BANK (dev, j);
 368                         printf ("%04x  ", SMC_inw (dev, i));
 369                 }
 370                 printf ("\n");
 371         }
 372 }