1 // SPDX-License-Identifier: GPL-2.0
3 * High-level sync()-related operations
6 #include <linux/blkdev.h>
7 #include <linux/kernel.h>
8 #include <linux/file.h>
10 #include <linux/slab.h>
11 #include <linux/export.h>
12 #include <linux/namei.h>
13 #include <linux/sched.h>
14 #include <linux/writeback.h>
15 #include <linux/syscalls.h>
16 #include <linux/linkage.h>
17 #include <linux/pagemap.h>
18 #include <linux/quotaops.h>
19 #include <linux/backing-dev.h>
22 #define VALID_FLAGS (SYNC_FILE_RANGE_WAIT_BEFORE|SYNC_FILE_RANGE_WRITE| \
23 SYNC_FILE_RANGE_WAIT_AFTER)
26 * Write out and wait upon all dirty data associated with this
27 * superblock. Filesystem data as well as the underlying block
28 * device. Takes the superblock lock.
30 int sync_filesystem(struct super_block
*sb
)
35 * We need to be protected against the filesystem going from
36 * r/o to r/w or vice versa.
38 WARN_ON(!rwsem_is_locked(&sb
->s_umount
));
41 * No point in syncing out anything if the filesystem is read-only.
47 * Do the filesystem syncing work. For simple filesystems
48 * writeback_inodes_sb(sb) just dirties buffers with inodes so we have
49 * to submit I/O for these buffers via sync_blockdev(). This also
50 * speeds up the wait == 1 case since in that case write_inode()
51 * methods call sync_dirty_buffer() and thus effectively write one block
54 writeback_inodes_sb(sb
, WB_REASON_SYNC
);
55 if (sb
->s_op
->sync_fs
) {
56 ret
= sb
->s_op
->sync_fs(sb
, 0);
60 ret
= sync_blockdev_nowait(sb
->s_bdev
);
65 if (sb
->s_op
->sync_fs
) {
66 ret
= sb
->s_op
->sync_fs(sb
, 1);
70 return sync_blockdev(sb
->s_bdev
);
72 EXPORT_SYMBOL(sync_filesystem
);
74 static void sync_inodes_one_sb(struct super_block
*sb
, void *arg
)
80 static void sync_fs_one_sb(struct super_block
*sb
, void *arg
)
82 if (!sb_rdonly(sb
) && !(sb
->s_iflags
& SB_I_SKIP_SYNC
) &&
84 sb
->s_op
->sync_fs(sb
, *(int *)arg
);
88 * Sync everything. We start by waking flusher threads so that most of
89 * writeback runs on all devices in parallel. Then we sync all inodes reliably
90 * which effectively also waits for all flusher threads to finish doing
91 * writeback. At this point all data is on disk so metadata should be stable
92 * and we tell filesystems to sync their metadata via ->sync_fs() calls.
93 * Finally, we writeout all block devices because some filesystems (e.g. ext2)
94 * just write metadata (such as inodes or bitmaps) to block device page cache
95 * and do not sync it on their own in ->sync_fs().
99 int nowait
= 0, wait
= 1;
101 wakeup_flusher_threads(WB_REASON_SYNC
);
102 iterate_supers(sync_inodes_one_sb
, NULL
);
103 iterate_supers(sync_fs_one_sb
, &nowait
);
104 iterate_supers(sync_fs_one_sb
, &wait
);
107 if (unlikely(laptop_mode
))
108 laptop_sync_completion();
111 SYSCALL_DEFINE0(sync
)
117 static void do_sync_work(struct work_struct
*work
)
122 * Sync twice to reduce the possibility we skipped some inodes / pages
123 * because they were temporarily locked
125 iterate_supers(sync_inodes_one_sb
, &nowait
);
126 iterate_supers(sync_fs_one_sb
, &nowait
);
128 iterate_supers(sync_inodes_one_sb
, &nowait
);
129 iterate_supers(sync_fs_one_sb
, &nowait
);
131 printk("Emergency Sync complete\n");
135 void emergency_sync(void)
137 struct work_struct
*work
;
139 work
= kmalloc(sizeof(*work
), GFP_ATOMIC
);
141 INIT_WORK(work
, do_sync_work
);
147 * sync a single super
149 SYSCALL_DEFINE1(syncfs
, int, fd
)
151 struct fd f
= fdget(fd
);
152 struct super_block
*sb
;
157 sb
= f
.file
->f_path
.dentry
->d_sb
;
159 down_read(&sb
->s_umount
);
160 ret
= sync_filesystem(sb
);
161 up_read(&sb
->s_umount
);
163 ret2
= errseq_check_and_advance(&sb
->s_wb_err
, &f
.file
->f_sb_err
);
166 return ret
? ret
: ret2
;
170 * vfs_fsync_range - helper to sync a range of data & metadata to disk
171 * @file: file to sync
172 * @start: offset in bytes of the beginning of data range to sync
173 * @end: offset in bytes of the end of data range (inclusive)
174 * @datasync: perform only datasync
176 * Write back data in range @start..@end and metadata for @file to disk. If
177 * @datasync is set only metadata needed to access modified file data is
180 int vfs_fsync_range(struct file
*file
, loff_t start
, loff_t end
, int datasync
)
182 struct inode
*inode
= file
->f_mapping
->host
;
184 if (!file
->f_op
->fsync
)
186 if (!datasync
&& (inode
->i_state
& I_DIRTY_TIME
))
187 mark_inode_dirty_sync(inode
);
188 return file
->f_op
->fsync(file
, start
, end
, datasync
);
190 EXPORT_SYMBOL(vfs_fsync_range
);
193 * vfs_fsync - perform a fsync or fdatasync on a file
194 * @file: file to sync
195 * @datasync: only perform a fdatasync operation
197 * Write back data and metadata for @file to disk. If @datasync is
198 * set only metadata needed to access modified file data is written.
200 int vfs_fsync(struct file
*file
, int datasync
)
202 return vfs_fsync_range(file
, 0, LLONG_MAX
, datasync
);
204 EXPORT_SYMBOL(vfs_fsync
);
206 static int do_fsync(unsigned int fd
, int datasync
)
208 struct fd f
= fdget(fd
);
212 ret
= vfs_fsync(f
.file
, datasync
);
218 SYSCALL_DEFINE1(fsync
, unsigned int, fd
)
220 return do_fsync(fd
, 0);
223 SYSCALL_DEFINE1(fdatasync
, unsigned int, fd
)
225 return do_fsync(fd
, 1);
228 int sync_file_range(struct file
*file
, loff_t offset
, loff_t nbytes
,
232 struct address_space
*mapping
;
233 loff_t endbyte
; /* inclusive */
237 if (flags
& ~VALID_FLAGS
)
240 endbyte
= offset
+ nbytes
;
244 if ((s64
)endbyte
< 0)
246 if (endbyte
< offset
)
249 if (sizeof(pgoff_t
) == 4) {
250 if (offset
>= (0x100000000ULL
<< PAGE_SHIFT
)) {
252 * The range starts outside a 32 bit machine's
253 * pagecache addressing capabilities. Let it "succeed"
258 if (endbyte
>= (0x100000000ULL
<< PAGE_SHIFT
)) {
269 endbyte
--; /* inclusive */
271 i_mode
= file_inode(file
)->i_mode
;
273 if (!S_ISREG(i_mode
) && !S_ISBLK(i_mode
) && !S_ISDIR(i_mode
) &&
277 mapping
= file
->f_mapping
;
279 if (flags
& SYNC_FILE_RANGE_WAIT_BEFORE
) {
280 ret
= file_fdatawait_range(file
, offset
, endbyte
);
285 if (flags
& SYNC_FILE_RANGE_WRITE
) {
286 int sync_mode
= WB_SYNC_NONE
;
288 if ((flags
& SYNC_FILE_RANGE_WRITE_AND_WAIT
) ==
289 SYNC_FILE_RANGE_WRITE_AND_WAIT
)
290 sync_mode
= WB_SYNC_ALL
;
292 ret
= __filemap_fdatawrite_range(mapping
, offset
, endbyte
,
298 if (flags
& SYNC_FILE_RANGE_WAIT_AFTER
)
299 ret
= file_fdatawait_range(file
, offset
, endbyte
);
306 * ksys_sync_file_range() permits finely controlled syncing over a segment of
307 * a file in the range offset .. (offset+nbytes-1) inclusive. If nbytes is
308 * zero then ksys_sync_file_range() will operate from offset out to EOF.
312 * SYNC_FILE_RANGE_WAIT_BEFORE: wait upon writeout of all pages in the range
313 * before performing the write.
315 * SYNC_FILE_RANGE_WRITE: initiate writeout of all those dirty pages in the
316 * range which are not presently under writeback. Note that this may block for
317 * significant periods due to exhaustion of disk request structures.
319 * SYNC_FILE_RANGE_WAIT_AFTER: wait upon writeout of all pages in the range
320 * after performing the write.
322 * Useful combinations of the flag bits are:
324 * SYNC_FILE_RANGE_WAIT_BEFORE|SYNC_FILE_RANGE_WRITE: ensures that all pages
325 * in the range which were dirty on entry to ksys_sync_file_range() are placed
326 * under writeout. This is a start-write-for-data-integrity operation.
328 * SYNC_FILE_RANGE_WRITE: start writeout of all dirty pages in the range which
329 * are not presently under writeout. This is an asynchronous flush-to-disk
330 * operation. Not suitable for data integrity operations.
332 * SYNC_FILE_RANGE_WAIT_BEFORE (or SYNC_FILE_RANGE_WAIT_AFTER): wait for
333 * completion of writeout of all pages in the range. This will be used after an
334 * earlier SYNC_FILE_RANGE_WAIT_BEFORE|SYNC_FILE_RANGE_WRITE operation to wait
335 * for that operation to complete and to return the result.
337 * SYNC_FILE_RANGE_WAIT_BEFORE|SYNC_FILE_RANGE_WRITE|SYNC_FILE_RANGE_WAIT_AFTER
338 * (a.k.a. SYNC_FILE_RANGE_WRITE_AND_WAIT):
339 * a traditional sync() operation. This is a write-for-data-integrity operation
340 * which will ensure that all pages in the range which were dirty on entry to
341 * ksys_sync_file_range() are written to disk. It should be noted that disk
342 * caches are not flushed by this call, so there are no guarantees here that the
343 * data will be available on disk after a crash.
346 * SYNC_FILE_RANGE_WAIT_BEFORE and SYNC_FILE_RANGE_WAIT_AFTER will detect any
347 * I/O errors or ENOSPC conditions and will return those to the caller, after
348 * clearing the EIO and ENOSPC flags in the address_space.
350 * It should be noted that none of these operations write out the file's
351 * metadata. So unless the application is strictly performing overwrites of
352 * already-instantiated disk blocks, there are no guarantees here that the data
353 * will be available after a crash.
355 int ksys_sync_file_range(int fd
, loff_t offset
, loff_t nbytes
,
364 ret
= sync_file_range(f
.file
, offset
, nbytes
, flags
);
370 SYSCALL_DEFINE4(sync_file_range
, int, fd
, loff_t
, offset
, loff_t
, nbytes
,
373 return ksys_sync_file_range(fd
, offset
, nbytes
, flags
);
376 #if defined(CONFIG_COMPAT) && defined(__ARCH_WANT_COMPAT_SYNC_FILE_RANGE)
377 COMPAT_SYSCALL_DEFINE6(sync_file_range
, int, fd
, compat_arg_u64_dual(offset
),
378 compat_arg_u64_dual(nbytes
), unsigned int, flags
)
380 return ksys_sync_file_range(fd
, compat_arg_u64_glue(offset
),
381 compat_arg_u64_glue(nbytes
), flags
);
385 /* It would be nice if people remember that not all the world's an i386
386 when they introduce new system calls */
387 SYSCALL_DEFINE4(sync_file_range2
, int, fd
, unsigned int, flags
,
388 loff_t
, offset
, loff_t
, nbytes
)
390 return ksys_sync_file_range(fd
, offset
, nbytes
, flags
);