1 /* tc-xtensa.c -- Assemble Xtensa instructions.
2 Copyright (C) 2003-2017 Free Software Foundation, Inc.
4 This file is part of GAS, the GNU Assembler.
6 GAS is free software; you can redistribute it and/or modify
7 it under the terms of the GNU General Public License as published by
8 the Free Software Foundation; either version 3, or (at your option)
11 GAS is distributed in the hope that it will be useful,
12 but WITHOUT ANY WARRANTY; without even the implied warranty of
13 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 GNU General Public License for more details.
16 You should have received a copy of the GNU General Public License
17 along with GAS; see the file COPYING. If not, write to
18 the Free Software Foundation, 51 Franklin Street - Fifth Floor, Boston,
19 MA 02110-1301, USA. */
24 #include "safe-ctype.h"
25 #include "tc-xtensa.h"
27 #include "xtensa-relax.h"
28 #include "dwarf2dbg.h"
29 #include "xtensa-istack.h"
30 #include "struc-symbol.h"
31 #include "xtensa-config.h"
32 #include "elf/xtensa.h"
34 /* Provide default values for new configuration settings. */
40 #define uint32 unsigned int
43 #define int32 signed int
48 Naming conventions (used somewhat inconsistently):
49 The xtensa_ functions are exported
50 The xg_ functions are internal
52 We also have a couple of different extensibility mechanisms.
53 1) The idiom replacement:
54 This is used when a line is first parsed to
55 replace an instruction pattern with another instruction
56 It is currently limited to replacements of instructions
57 with constant operands.
58 2) The xtensa-relax.c mechanism that has stronger instruction
59 replacement patterns. When an instruction's immediate field
60 does not fit the next instruction sequence is attempted.
61 In addition, "narrow" opcodes are supported this way. */
64 /* Define characters with special meanings to GAS. */
65 const char comment_chars
[] = "#";
66 const char line_comment_chars
[] = "#";
67 const char line_separator_chars
[] = ";";
68 const char EXP_CHARS
[] = "eE";
69 const char FLT_CHARS
[] = "rRsSfFdDxXpP";
72 /* Flags to indicate whether the hardware supports the density and
73 absolute literals options. */
75 bfd_boolean density_supported
;
76 bfd_boolean absolute_literals_supported
;
78 static vliw_insn cur_vinsn
;
80 unsigned xtensa_num_pipe_stages
;
81 unsigned xtensa_fetch_width
;
83 static enum debug_info_type xt_saved_debug_type
= DEBUG_NONE
;
85 /* Some functions are only valid in the front end. This variable
86 allows us to assert that we haven't crossed over into the
88 static bfd_boolean past_xtensa_end
= FALSE
;
90 /* Flags for properties of the last instruction in a segment. */
91 #define FLAG_IS_A0_WRITER 0x1
92 #define FLAG_IS_BAD_LOOPEND 0x2
95 /* We define a special segment names ".literal" to place literals
96 into. The .fini and .init sections are special because they
97 contain code that is moved together by the linker. We give them
98 their own special .fini.literal and .init.literal sections. */
100 #define LITERAL_SECTION_NAME xtensa_section_rename (".literal")
101 #define LIT4_SECTION_NAME xtensa_section_rename (".lit4")
102 #define INIT_SECTION_NAME xtensa_section_rename (".init")
103 #define FINI_SECTION_NAME xtensa_section_rename (".fini")
106 /* This type is used for the directive_stack to keep track of the
107 state of the literal collection pools. If lit_prefix is set, it is
108 used to determine the literal section names; otherwise, the literal
109 sections are determined based on the current text section. The
110 lit_seg and lit4_seg fields cache these literal sections, with the
111 current_text_seg field used a tag to indicate whether the cached
114 typedef struct lit_state_struct
117 segT current_text_seg
;
122 static lit_state default_lit_sections
;
125 /* We keep a list of literal segments. The seg_list type is the node
126 for this list. The literal_head pointer is the head of the list,
127 with the literal_head_h dummy node at the start. */
129 typedef struct seg_list_struct
131 struct seg_list_struct
*next
;
135 static seg_list literal_head_h
;
136 static seg_list
*literal_head
= &literal_head_h
;
139 /* Lists of symbols. We keep a list of symbols that label the current
140 instruction, so that we can adjust the symbols when inserting alignment
141 for various instructions. We also keep a list of all the symbols on
142 literals, so that we can fix up those symbols when the literals are
143 later moved into the text sections. */
145 typedef struct sym_list_struct
147 struct sym_list_struct
*next
;
151 static sym_list
*insn_labels
= NULL
;
152 static sym_list
*free_insn_labels
= NULL
;
153 static sym_list
*saved_insn_labels
= NULL
;
155 static sym_list
*literal_syms
;
158 /* Flags to determine whether to prefer const16 or l32r
159 if both options are available. */
160 int prefer_const16
= 0;
163 /* Global flag to indicate when we are emitting literals. */
164 int generating_literals
= 0;
166 /* The following PROPERTY table definitions are copied from
167 <elf/xtensa.h> and must be kept in sync with the code there. */
169 /* Flags in the property tables to specify whether blocks of memory
170 are literals, instructions, data, or unreachable. For
171 instructions, blocks that begin loop targets and branch targets are
172 designated. Blocks that do not allow density, instruction
173 reordering or transformation are also specified. Finally, for
174 branch targets, branch target alignment priority is included.
175 Alignment of the next block is specified in the current block
176 and the size of the current block does not include any fill required
177 to align to the next block. */
179 #define XTENSA_PROP_LITERAL 0x00000001
180 #define XTENSA_PROP_INSN 0x00000002
181 #define XTENSA_PROP_DATA 0x00000004
182 #define XTENSA_PROP_UNREACHABLE 0x00000008
183 /* Instruction only properties at beginning of code. */
184 #define XTENSA_PROP_INSN_LOOP_TARGET 0x00000010
185 #define XTENSA_PROP_INSN_BRANCH_TARGET 0x00000020
186 /* Instruction only properties about code. */
187 #define XTENSA_PROP_INSN_NO_DENSITY 0x00000040
188 #define XTENSA_PROP_INSN_NO_REORDER 0x00000080
189 /* Historically, NO_TRANSFORM was a property of instructions,
190 but it should apply to literals under certain circumstances. */
191 #define XTENSA_PROP_NO_TRANSFORM 0x00000100
193 /* Branch target alignment information. This transmits information
194 to the linker optimization about the priority of aligning a
195 particular block for branch target alignment: None, low priority,
196 high priority, or required. These only need to be checked in
197 instruction blocks marked as XTENSA_PROP_INSN_BRANCH_TARGET.
200 switch (GET_XTENSA_PROP_BT_ALIGN (flags))
201 case XTENSA_PROP_BT_ALIGN_NONE:
202 case XTENSA_PROP_BT_ALIGN_LOW:
203 case XTENSA_PROP_BT_ALIGN_HIGH:
204 case XTENSA_PROP_BT_ALIGN_REQUIRE:
206 #define XTENSA_PROP_BT_ALIGN_MASK 0x00000600
208 /* No branch target alignment. */
209 #define XTENSA_PROP_BT_ALIGN_NONE 0x0
210 /* Low priority branch target alignment. */
211 #define XTENSA_PROP_BT_ALIGN_LOW 0x1
212 /* High priority branch target alignment. */
213 #define XTENSA_PROP_BT_ALIGN_HIGH 0x2
214 /* Required branch target alignment. */
215 #define XTENSA_PROP_BT_ALIGN_REQUIRE 0x3
217 #define SET_XTENSA_PROP_BT_ALIGN(flag, align) \
218 (((flag) & (~XTENSA_PROP_BT_ALIGN_MASK)) | \
219 (((align) << 9) & XTENSA_PROP_BT_ALIGN_MASK))
222 /* Alignment is specified in the block BEFORE the one that needs
223 alignment. Up to 5 bits. Use GET_XTENSA_PROP_ALIGNMENT(flags) to
224 get the required alignment specified as a power of 2. Use
225 SET_XTENSA_PROP_ALIGNMENT(flags, pow2) to set the required
226 alignment. Be careful of side effects since the SET will evaluate
227 flags twice. Also, note that the SIZE of a block in the property
228 table does not include the alignment size, so the alignment fill
229 must be calculated to determine if two blocks are contiguous.
230 TEXT_ALIGN is not currently implemented but is a placeholder for a
231 possible future implementation. */
233 #define XTENSA_PROP_ALIGN 0x00000800
235 #define XTENSA_PROP_ALIGNMENT_MASK 0x0001f000
237 #define SET_XTENSA_PROP_ALIGNMENT(flag, align) \
238 (((flag) & (~XTENSA_PROP_ALIGNMENT_MASK)) | \
239 (((align) << 12) & XTENSA_PROP_ALIGNMENT_MASK))
241 #define XTENSA_PROP_INSN_ABSLIT 0x00020000
244 /* Structure for saving instruction and alignment per-fragment data
245 that will be written to the object file. This structure is
246 equivalent to the actual data that will be written out to the file
247 but is easier to use. We provide a conversion to file flags
248 in frag_flags_to_number. */
250 typedef struct frag_flags_struct frag_flags
;
252 struct frag_flags_struct
254 /* is_literal should only be used after xtensa_move_literals.
255 If you need to check if you are generating a literal fragment,
256 then use the generating_literals global. */
258 unsigned is_literal
: 1;
259 unsigned is_insn
: 1;
260 unsigned is_data
: 1;
261 unsigned is_unreachable
: 1;
263 /* is_specific_opcode implies no_transform. */
264 unsigned is_no_transform
: 1;
268 unsigned is_loop_target
: 1;
269 unsigned is_branch_target
: 1; /* Branch targets have a priority. */
270 unsigned bt_align_priority
: 2;
272 unsigned is_no_density
: 1;
273 /* no_longcalls flag does not need to be placed in the object file. */
275 unsigned is_no_reorder
: 1;
277 /* Uses absolute literal addressing for l32r. */
278 unsigned is_abslit
: 1;
280 unsigned is_align
: 1;
281 unsigned alignment
: 5;
285 /* Structure for saving information about a block of property data
286 for frags that have the same flags. */
287 struct xtensa_block_info_struct
293 struct xtensa_block_info_struct
*next
;
297 /* Structure for saving the current state before emitting literals. */
298 typedef struct emit_state_struct
303 int generating_literals
;
307 /* Opcode placement information */
309 typedef unsigned long long bitfield
;
310 #define bit_is_set(bit, bf) ((bf) & (0x01ll << (bit)))
311 #define set_bit(bit, bf) ((bf) |= (0x01ll << (bit)))
312 #define clear_bit(bit, bf) ((bf) &= ~(0x01ll << (bit)))
314 #define MAX_FORMATS 32
316 typedef struct op_placement_info_struct
319 /* A number describing how restrictive the issue is for this
320 opcode. For example, an opcode that fits lots of different
321 formats has a high freedom, as does an opcode that fits
322 only one format but many slots in that format. The most
323 restrictive is the opcode that fits only one slot in one
326 xtensa_format narrowest
;
330 /* formats is a bitfield with the Nth bit set
331 if the opcode fits in the Nth xtensa_format. */
334 /* slots[N]'s Mth bit is set if the op fits in the
335 Mth slot of the Nth xtensa_format. */
336 bitfield slots
[MAX_FORMATS
];
338 /* A count of the number of slots in a given format
339 an op can fit (i.e., the bitcount of the slot field above). */
340 char slots_in_format
[MAX_FORMATS
];
342 } op_placement_info
, *op_placement_info_table
;
344 op_placement_info_table op_placement_table
;
347 /* Extra expression types. */
349 #define O_pltrel O_md1 /* like O_symbol but use a PLT reloc */
350 #define O_hi16 O_md2 /* use high 16 bits of symbolic value */
351 #define O_lo16 O_md3 /* use low 16 bits of symbolic value */
352 #define O_pcrel O_md4 /* value is a PC-relative offset */
353 #define O_tlsfunc O_md5 /* TLS_FUNC/TLSDESC_FN relocation */
354 #define O_tlsarg O_md6 /* TLS_ARG/TLSDESC_ARG relocation */
355 #define O_tlscall O_md7 /* TLS_CALL relocation */
356 #define O_tpoff O_md8 /* TPOFF relocation */
357 #define O_dtpoff O_md9 /* DTPOFF relocation */
359 struct suffix_reloc_map
363 bfd_reloc_code_real_type reloc
;
367 #define SUFFIX_MAP(str, reloc, op) { str, sizeof (str) - 1, reloc, op }
369 static struct suffix_reloc_map suffix_relocs
[] =
371 SUFFIX_MAP ("l", BFD_RELOC_LO16
, O_lo16
),
372 SUFFIX_MAP ("h", BFD_RELOC_HI16
, O_hi16
),
373 SUFFIX_MAP ("plt", BFD_RELOC_XTENSA_PLT
, O_pltrel
),
374 SUFFIX_MAP ("pcrel", BFD_RELOC_32_PCREL
, O_pcrel
),
375 SUFFIX_MAP ("tlsfunc", BFD_RELOC_XTENSA_TLS_FUNC
, O_tlsfunc
),
376 SUFFIX_MAP ("tlsarg", BFD_RELOC_XTENSA_TLS_ARG
, O_tlsarg
),
377 SUFFIX_MAP ("tlscall", BFD_RELOC_XTENSA_TLS_CALL
, O_tlscall
),
378 SUFFIX_MAP ("tpoff", BFD_RELOC_XTENSA_TLS_TPOFF
, O_tpoff
),
379 SUFFIX_MAP ("dtpoff", BFD_RELOC_XTENSA_TLS_DTPOFF
, O_dtpoff
),
393 directive_literal_prefix
,
395 directive_absolute_literals
,
396 directive_last_directive
402 bfd_boolean can_be_negated
;
405 const directive_infoS directive_info
[] =
408 { "literal", FALSE
},
410 { "transform", TRUE
},
411 { "freeregs", FALSE
},
412 { "longcalls", TRUE
},
413 { "literal_prefix", FALSE
},
414 { "schedule", TRUE
},
415 { "absolute-literals", TRUE
}
418 bfd_boolean directive_state
[] =
423 TRUE
, /* transform */
424 FALSE
, /* freeregs */
425 FALSE
, /* longcalls */
426 FALSE
, /* literal_prefix */
427 FALSE
, /* schedule */
428 FALSE
/* absolute_literals */
431 /* A circular list of all potential and actual literal pool locations
435 struct litpool_frag
*next
;
436 struct litpool_frag
*prev
;
439 short priority
; /* 1, 2, or 3 -- 1 is highest */
440 short original_priority
;
443 /* Map a segment to its litpool_frag list. */
446 struct litpool_seg
*next
;
448 struct litpool_frag frag_list
;
449 int frag_count
; /* since last litpool location */
452 static struct litpool_seg litpool_seg_list
;
455 /* Directive functions. */
457 static void xtensa_begin_directive (int);
458 static void xtensa_end_directive (int);
459 static void xtensa_literal_prefix (void);
460 static void xtensa_literal_position (int);
461 static void xtensa_literal_pseudo (int);
462 static void xtensa_frequency_pseudo (int);
463 static void xtensa_elf_cons (int);
464 static void xtensa_leb128 (int);
466 /* Parsing and Idiom Translation. */
468 static bfd_reloc_code_real_type
xtensa_elf_suffix (char **, expressionS
*);
470 /* Various Other Internal Functions. */
472 extern bfd_boolean
xg_is_single_relaxable_insn (TInsn
*, TInsn
*, bfd_boolean
);
473 static bfd_boolean
xg_build_to_insn (TInsn
*, TInsn
*, BuildInstr
*);
474 static void xtensa_mark_literal_pool_location (void);
475 static addressT
get_expanded_loop_offset (xtensa_opcode
);
476 static fragS
*get_literal_pool_location (segT
);
477 static void set_literal_pool_location (segT
, fragS
*);
478 static void xtensa_set_frag_assembly_state (fragS
*);
479 static void finish_vinsn (vliw_insn
*);
480 static bfd_boolean
emit_single_op (TInsn
*);
481 static int total_frag_text_expansion (fragS
*);
482 static bfd_boolean use_trampolines
= TRUE
;
483 static void xtensa_check_frag_count (void);
484 static void xtensa_create_trampoline_frag (bfd_boolean
);
485 static void xtensa_maybe_create_trampoline_frag (void);
486 struct trampoline_frag
;
487 static int init_trampoline_frag (fragS
*);
488 static fixS
*xg_append_jump (fragS
*fragP
, symbolS
*sym
, offsetT offset
);
489 static void xtensa_maybe_create_literal_pool_frag (bfd_boolean
, bfd_boolean
);
490 static bfd_boolean auto_litpools
= FALSE
;
491 static int auto_litpool_limit
= 10000;
493 /* Alignment Functions. */
495 static int get_text_align_power (unsigned);
496 static int get_text_align_max_fill_size (int, bfd_boolean
, bfd_boolean
);
497 static int branch_align_power (segT
);
499 /* Helpers for xtensa_relax_frag(). */
501 static long relax_frag_add_nop (fragS
*);
503 /* Accessors for additional per-subsegment information. */
505 static unsigned get_last_insn_flags (segT
, subsegT
);
506 static void set_last_insn_flags (segT
, subsegT
, unsigned, bfd_boolean
);
507 static float get_subseg_total_freq (segT
, subsegT
);
508 static float get_subseg_target_freq (segT
, subsegT
);
509 static void set_subseg_freq (segT
, subsegT
, float, float);
511 /* Segment list functions. */
513 static void xtensa_move_literals (void);
514 static void xtensa_reorder_segments (void);
515 static void xtensa_switch_to_literal_fragment (emit_state
*);
516 static void xtensa_switch_to_non_abs_literal_fragment (emit_state
*);
517 static void xtensa_switch_section_emit_state (emit_state
*, segT
, subsegT
);
518 static void xtensa_restore_emit_state (emit_state
*);
519 static segT
cache_literal_section (bfd_boolean
);
521 /* op_placement_info functions. */
523 static void init_op_placement_info_table (void);
524 extern bfd_boolean
opcode_fits_format_slot (xtensa_opcode
, xtensa_format
, int);
525 static int xg_get_single_size (xtensa_opcode
);
526 static xtensa_format
xg_get_single_format (xtensa_opcode
);
527 static int xg_get_single_slot (xtensa_opcode
);
529 /* TInsn and IStack functions. */
531 static bfd_boolean
tinsn_has_symbolic_operands (const TInsn
*);
532 static bfd_boolean
tinsn_has_invalid_symbolic_operands (const TInsn
*);
533 static bfd_boolean
tinsn_has_complex_operands (const TInsn
*);
534 static bfd_boolean
tinsn_to_insnbuf (TInsn
*, xtensa_insnbuf
);
535 static bfd_boolean
tinsn_check_arguments (const TInsn
*);
536 static void tinsn_from_chars (TInsn
*, char *, int);
537 static void tinsn_immed_from_frag (TInsn
*, fragS
*, int);
538 static int get_num_stack_text_bytes (IStack
*);
539 static int get_num_stack_literal_bytes (IStack
*);
540 static bfd_boolean
tinsn_to_slotbuf (xtensa_format
, int, TInsn
*, xtensa_insnbuf
);
542 /* vliw_insn functions. */
544 static void xg_init_vinsn (vliw_insn
*);
545 static void xg_copy_vinsn (vliw_insn
*, vliw_insn
*);
546 static void xg_clear_vinsn (vliw_insn
*);
547 static bfd_boolean
vinsn_has_specific_opcodes (vliw_insn
*);
548 static void xg_free_vinsn (vliw_insn
*);
549 static bfd_boolean vinsn_to_insnbuf
550 (vliw_insn
*, char *, fragS
*, bfd_boolean
);
551 static void vinsn_from_chars (vliw_insn
*, char *);
553 /* Expression Utilities. */
555 bfd_boolean
expr_is_const (const expressionS
*);
556 offsetT
get_expr_const (const expressionS
*);
557 void set_expr_const (expressionS
*, offsetT
);
558 bfd_boolean
expr_is_register (const expressionS
*);
559 offsetT
get_expr_register (const expressionS
*);
560 void set_expr_symbol_offset (expressionS
*, symbolS
*, offsetT
);
561 bfd_boolean
expr_is_equal (expressionS
*, expressionS
*);
562 static void copy_expr (expressionS
*, const expressionS
*);
564 /* Section renaming. */
566 static void build_section_rename (const char *);
569 /* ISA imported from bfd. */
570 extern xtensa_isa xtensa_default_isa
;
572 extern int target_big_endian
;
574 static xtensa_opcode xtensa_addi_opcode
;
575 static xtensa_opcode xtensa_addmi_opcode
;
576 static xtensa_opcode xtensa_call0_opcode
;
577 static xtensa_opcode xtensa_call4_opcode
;
578 static xtensa_opcode xtensa_call8_opcode
;
579 static xtensa_opcode xtensa_call12_opcode
;
580 static xtensa_opcode xtensa_callx0_opcode
;
581 static xtensa_opcode xtensa_callx4_opcode
;
582 static xtensa_opcode xtensa_callx8_opcode
;
583 static xtensa_opcode xtensa_callx12_opcode
;
584 static xtensa_opcode xtensa_const16_opcode
;
585 static xtensa_opcode xtensa_entry_opcode
;
586 static xtensa_opcode xtensa_extui_opcode
;
587 static xtensa_opcode xtensa_movi_opcode
;
588 static xtensa_opcode xtensa_movi_n_opcode
;
589 static xtensa_opcode xtensa_isync_opcode
;
590 static xtensa_opcode xtensa_j_opcode
;
591 static xtensa_opcode xtensa_jx_opcode
;
592 static xtensa_opcode xtensa_l32r_opcode
;
593 static xtensa_opcode xtensa_loop_opcode
;
594 static xtensa_opcode xtensa_loopnez_opcode
;
595 static xtensa_opcode xtensa_loopgtz_opcode
;
596 static xtensa_opcode xtensa_nop_opcode
;
597 static xtensa_opcode xtensa_nop_n_opcode
;
598 static xtensa_opcode xtensa_or_opcode
;
599 static xtensa_opcode xtensa_ret_opcode
;
600 static xtensa_opcode xtensa_ret_n_opcode
;
601 static xtensa_opcode xtensa_retw_opcode
;
602 static xtensa_opcode xtensa_retw_n_opcode
;
603 static xtensa_opcode xtensa_rsr_lcount_opcode
;
604 static xtensa_opcode xtensa_waiti_opcode
;
605 static int config_max_slots
= 0;
608 /* Command-line Options. */
610 bfd_boolean use_literal_section
= TRUE
;
611 enum flix_level produce_flix
= FLIX_ALL
;
612 static bfd_boolean align_targets
= TRUE
;
613 static bfd_boolean warn_unaligned_branch_targets
= FALSE
;
614 static bfd_boolean has_a0_b_retw
= FALSE
;
615 static bfd_boolean workaround_a0_b_retw
= FALSE
;
616 static bfd_boolean workaround_b_j_loop_end
= FALSE
;
617 static bfd_boolean workaround_short_loop
= FALSE
;
618 static bfd_boolean maybe_has_short_loop
= FALSE
;
619 static bfd_boolean workaround_close_loop_end
= FALSE
;
620 static bfd_boolean maybe_has_close_loop_end
= FALSE
;
621 static bfd_boolean enforce_three_byte_loop_align
= FALSE
;
623 /* When workaround_short_loops is TRUE, all loops with early exits must
624 have at least 3 instructions. workaround_all_short_loops is a modifier
625 to the workaround_short_loop flag. In addition to the
626 workaround_short_loop actions, all straightline loopgtz and loopnez
627 must have at least 3 instructions. */
629 static bfd_boolean workaround_all_short_loops
= FALSE
;
633 xtensa_setup_hw_workarounds (int earliest
, int latest
)
635 if (earliest
> latest
)
636 as_fatal (_("illegal range of target hardware versions"));
638 /* Enable all workarounds for pre-T1050.0 hardware. */
639 if (earliest
< 105000 || latest
< 105000)
641 workaround_a0_b_retw
|= TRUE
;
642 workaround_b_j_loop_end
|= TRUE
;
643 workaround_short_loop
|= TRUE
;
644 workaround_close_loop_end
|= TRUE
;
645 workaround_all_short_loops
|= TRUE
;
646 enforce_three_byte_loop_align
= TRUE
;
653 option_density
= OPTION_MD_BASE
,
657 option_no_generate_flix
,
664 option_no_link_relax
,
672 option_text_section_literals
,
673 option_no_text_section_literals
,
675 option_absolute_literals
,
676 option_no_absolute_literals
,
678 option_align_targets
,
679 option_no_align_targets
,
681 option_warn_unaligned_targets
,
686 option_workaround_a0_b_retw
,
687 option_no_workaround_a0_b_retw
,
689 option_workaround_b_j_loop_end
,
690 option_no_workaround_b_j_loop_end
,
692 option_workaround_short_loop
,
693 option_no_workaround_short_loop
,
695 option_workaround_all_short_loops
,
696 option_no_workaround_all_short_loops
,
698 option_workaround_close_loop_end
,
699 option_no_workaround_close_loop_end
,
701 option_no_workarounds
,
703 option_rename_section_name
,
706 option_prefer_const16
,
708 option_target_hardware
,
711 option_no_trampolines
,
713 option_auto_litpools
,
714 option_no_auto_litpools
,
715 option_auto_litpool_limit
,
718 const char *md_shortopts
= "";
720 struct option md_longopts
[] =
722 { "density", no_argument
, NULL
, option_density
},
723 { "no-density", no_argument
, NULL
, option_no_density
},
725 { "flix", no_argument
, NULL
, option_flix
},
726 { "no-generate-flix", no_argument
, NULL
, option_no_generate_flix
},
727 { "no-allow-flix", no_argument
, NULL
, option_no_flix
},
729 /* Both "relax" and "generics" are deprecated and treated as equivalent
730 to the "transform" option. */
731 { "relax", no_argument
, NULL
, option_relax
},
732 { "no-relax", no_argument
, NULL
, option_no_relax
},
733 { "generics", no_argument
, NULL
, option_generics
},
734 { "no-generics", no_argument
, NULL
, option_no_generics
},
736 { "transform", no_argument
, NULL
, option_transform
},
737 { "no-transform", no_argument
, NULL
, option_no_transform
},
738 { "text-section-literals", no_argument
, NULL
, option_text_section_literals
},
739 { "no-text-section-literals", no_argument
, NULL
,
740 option_no_text_section_literals
},
741 { "absolute-literals", no_argument
, NULL
, option_absolute_literals
},
742 { "no-absolute-literals", no_argument
, NULL
, option_no_absolute_literals
},
743 /* This option was changed from -align-target to -target-align
744 because it conflicted with the "-al" option. */
745 { "target-align", no_argument
, NULL
, option_align_targets
},
746 { "no-target-align", no_argument
, NULL
, option_no_align_targets
},
747 { "warn-unaligned-targets", no_argument
, NULL
,
748 option_warn_unaligned_targets
},
749 { "longcalls", no_argument
, NULL
, option_longcalls
},
750 { "no-longcalls", no_argument
, NULL
, option_no_longcalls
},
752 { "no-workaround-a0-b-retw", no_argument
, NULL
,
753 option_no_workaround_a0_b_retw
},
754 { "workaround-a0-b-retw", no_argument
, NULL
, option_workaround_a0_b_retw
},
756 { "no-workaround-b-j-loop-end", no_argument
, NULL
,
757 option_no_workaround_b_j_loop_end
},
758 { "workaround-b-j-loop-end", no_argument
, NULL
,
759 option_workaround_b_j_loop_end
},
761 { "no-workaround-short-loops", no_argument
, NULL
,
762 option_no_workaround_short_loop
},
763 { "workaround-short-loops", no_argument
, NULL
,
764 option_workaround_short_loop
},
766 { "no-workaround-all-short-loops", no_argument
, NULL
,
767 option_no_workaround_all_short_loops
},
768 { "workaround-all-short-loop", no_argument
, NULL
,
769 option_workaround_all_short_loops
},
771 { "prefer-l32r", no_argument
, NULL
, option_prefer_l32r
},
772 { "prefer-const16", no_argument
, NULL
, option_prefer_const16
},
774 { "no-workarounds", no_argument
, NULL
, option_no_workarounds
},
776 { "no-workaround-close-loop-end", no_argument
, NULL
,
777 option_no_workaround_close_loop_end
},
778 { "workaround-close-loop-end", no_argument
, NULL
,
779 option_workaround_close_loop_end
},
781 { "rename-section", required_argument
, NULL
, option_rename_section_name
},
783 { "link-relax", no_argument
, NULL
, option_link_relax
},
784 { "no-link-relax", no_argument
, NULL
, option_no_link_relax
},
786 { "target-hardware", required_argument
, NULL
, option_target_hardware
},
788 { "trampolines", no_argument
, NULL
, option_trampolines
},
789 { "no-trampolines", no_argument
, NULL
, option_no_trampolines
},
791 { "auto-litpools", no_argument
, NULL
, option_auto_litpools
},
792 { "no-auto-litpools", no_argument
, NULL
, option_no_auto_litpools
},
793 { "auto-litpool-limit", required_argument
, NULL
, option_auto_litpool_limit
},
795 { NULL
, no_argument
, NULL
, 0 }
798 size_t md_longopts_size
= sizeof md_longopts
;
802 md_parse_option (int c
, const char *arg
)
807 as_warn (_("--density option is ignored"));
809 case option_no_density
:
810 as_warn (_("--no-density option is ignored"));
812 case option_link_relax
:
815 case option_no_link_relax
:
819 produce_flix
= FLIX_ALL
;
821 case option_no_generate_flix
:
822 produce_flix
= FLIX_NO_GENERATE
;
825 produce_flix
= FLIX_NONE
;
827 case option_generics
:
828 as_warn (_("--generics is deprecated; use --transform instead"));
829 return md_parse_option (option_transform
, arg
);
830 case option_no_generics
:
831 as_warn (_("--no-generics is deprecated; use --no-transform instead"));
832 return md_parse_option (option_no_transform
, arg
);
834 as_warn (_("--relax is deprecated; use --transform instead"));
835 return md_parse_option (option_transform
, arg
);
836 case option_no_relax
:
837 as_warn (_("--no-relax is deprecated; use --no-transform instead"));
838 return md_parse_option (option_no_transform
, arg
);
839 case option_longcalls
:
840 directive_state
[directive_longcalls
] = TRUE
;
842 case option_no_longcalls
:
843 directive_state
[directive_longcalls
] = FALSE
;
845 case option_text_section_literals
:
846 use_literal_section
= FALSE
;
848 case option_no_text_section_literals
:
849 use_literal_section
= TRUE
;
851 case option_absolute_literals
:
852 if (!absolute_literals_supported
)
854 as_fatal (_("--absolute-literals option not supported in this Xtensa configuration"));
857 directive_state
[directive_absolute_literals
] = TRUE
;
859 case option_no_absolute_literals
:
860 directive_state
[directive_absolute_literals
] = FALSE
;
863 case option_workaround_a0_b_retw
:
864 workaround_a0_b_retw
= TRUE
;
866 case option_no_workaround_a0_b_retw
:
867 workaround_a0_b_retw
= FALSE
;
869 case option_workaround_b_j_loop_end
:
870 workaround_b_j_loop_end
= TRUE
;
872 case option_no_workaround_b_j_loop_end
:
873 workaround_b_j_loop_end
= FALSE
;
876 case option_workaround_short_loop
:
877 workaround_short_loop
= TRUE
;
879 case option_no_workaround_short_loop
:
880 workaround_short_loop
= FALSE
;
883 case option_workaround_all_short_loops
:
884 workaround_all_short_loops
= TRUE
;
886 case option_no_workaround_all_short_loops
:
887 workaround_all_short_loops
= FALSE
;
890 case option_workaround_close_loop_end
:
891 workaround_close_loop_end
= TRUE
;
893 case option_no_workaround_close_loop_end
:
894 workaround_close_loop_end
= FALSE
;
897 case option_no_workarounds
:
898 workaround_a0_b_retw
= FALSE
;
899 workaround_b_j_loop_end
= FALSE
;
900 workaround_short_loop
= FALSE
;
901 workaround_all_short_loops
= FALSE
;
902 workaround_close_loop_end
= FALSE
;
905 case option_align_targets
:
906 align_targets
= TRUE
;
908 case option_no_align_targets
:
909 align_targets
= FALSE
;
912 case option_warn_unaligned_targets
:
913 warn_unaligned_branch_targets
= TRUE
;
916 case option_rename_section_name
:
917 build_section_rename (arg
);
921 /* -Qy, -Qn: SVR4 arguments controlling whether a .comment section
922 should be emitted or not. FIXME: Not implemented. */
925 case option_prefer_l32r
:
927 as_fatal (_("prefer-l32r conflicts with prefer-const16"));
931 case option_prefer_const16
:
933 as_fatal (_("prefer-const16 conflicts with prefer-l32r"));
937 case option_target_hardware
:
939 int earliest
, latest
= 0;
941 if (*arg
== 0 || *arg
== '-')
942 as_fatal (_("invalid target hardware version"));
944 earliest
= strtol (arg
, &end
, 0);
948 else if (*end
== '-')
951 as_fatal (_("invalid target hardware version"));
952 latest
= strtol (end
, &end
, 0);
955 as_fatal (_("invalid target hardware version"));
957 xtensa_setup_hw_workarounds (earliest
, latest
);
961 case option_transform
:
962 /* This option has no affect other than to use the defaults,
963 which are already set. */
966 case option_no_transform
:
967 /* This option turns off all transformations of any kind.
968 However, because we want to preserve the state of other
969 directives, we only change its own field. Thus, before
970 you perform any transformation, always check if transform
971 is available. If you use the functions we provide for this
972 purpose, you will be ok. */
973 directive_state
[directive_transform
] = FALSE
;
976 case option_trampolines
:
977 use_trampolines
= TRUE
;
980 case option_no_trampolines
:
981 use_trampolines
= FALSE
;
984 case option_auto_litpools
:
985 auto_litpools
= TRUE
;
986 use_literal_section
= FALSE
;
989 case option_no_auto_litpools
:
990 auto_litpools
= FALSE
;
991 auto_litpool_limit
= -1;
994 case option_auto_litpool_limit
:
998 if (auto_litpool_limit
< 0)
999 as_fatal (_("no-auto-litpools is incompatible with auto-litpool-limit"));
1000 if (*arg
== 0 || *arg
== '-')
1001 as_fatal (_("invalid auto-litpool-limit argument"));
1002 value
= strtol (arg
, &end
, 10);
1004 as_fatal (_("invalid auto-litpool-limit argument"));
1005 if (value
< 100 || value
> 10000)
1006 as_fatal (_("invalid auto-litpool-limit argument (range is 100-10000)"));
1007 auto_litpool_limit
= value
;
1008 auto_litpools
= TRUE
;
1009 use_literal_section
= FALSE
;
1020 md_show_usage (FILE *stream
)
1024 --[no-]text-section-literals\n\
1025 [Do not] put literals in the text section\n\
1026 --[no-]absolute-literals\n\
1027 [Do not] default to use non-PC-relative literals\n\
1028 --[no-]target-align [Do not] try to align branch targets\n\
1029 --[no-]longcalls [Do not] emit 32-bit call sequences\n\
1030 --[no-]transform [Do not] transform instructions\n\
1031 --flix both allow hand-written and generate flix bundles\n\
1032 --no-generate-flix allow hand-written but do not generate\n\
1034 --no-allow-flix neither allow hand-written nor generate\n\
1036 --rename-section old=new Rename section 'old' to 'new'\n\
1037 --[no-]trampolines [Do not] generate trampolines (jumps to jumps)\n\
1038 when jumps do not reach their targets\n\
1039 --[no-]auto-litpools [Do not] automatically create literal pools\n\
1040 --auto-litpool-limit=<value>\n\
1041 (range 100-10000) Maximum number of blocks of\n\
1042 instructions to emit between literal pool\n\
1043 locations; implies --auto-litpools flag\n", stream
);
1047 /* Functions related to the list of current label symbols. */
1050 xtensa_add_insn_label (symbolS
*sym
)
1054 if (!free_insn_labels
)
1055 l
= XNEW (sym_list
);
1058 l
= free_insn_labels
;
1059 free_insn_labels
= l
->next
;
1063 l
->next
= insn_labels
;
1069 xtensa_clear_insn_labels (void)
1073 for (pl
= &free_insn_labels
; *pl
!= NULL
; pl
= &(*pl
)->next
)
1081 xtensa_move_labels (fragS
*new_frag
, valueT new_offset
)
1085 for (lit
= insn_labels
; lit
; lit
= lit
->next
)
1087 symbolS
*lit_sym
= lit
->sym
;
1088 S_SET_VALUE (lit_sym
, new_offset
);
1089 symbol_set_frag (lit_sym
, new_frag
);
1094 /* Directive data and functions. */
1096 typedef struct state_stackS_struct
1098 directiveE directive
;
1099 bfd_boolean negated
;
1100 bfd_boolean old_state
;
1104 struct state_stackS_struct
*prev
;
1107 state_stackS
*directive_state_stack
;
1109 const pseudo_typeS md_pseudo_table
[] =
1111 { "align", s_align_bytes
, 0 }, /* Defaulting is invalid (0). */
1112 { "literal_position", xtensa_literal_position
, 0 },
1113 { "frame", s_ignore
, 0 }, /* Formerly used for STABS debugging. */
1114 { "long", xtensa_elf_cons
, 4 },
1115 { "word", xtensa_elf_cons
, 4 },
1116 { "4byte", xtensa_elf_cons
, 4 },
1117 { "short", xtensa_elf_cons
, 2 },
1118 { "2byte", xtensa_elf_cons
, 2 },
1119 { "sleb128", xtensa_leb128
, 1},
1120 { "uleb128", xtensa_leb128
, 0},
1121 { "begin", xtensa_begin_directive
, 0 },
1122 { "end", xtensa_end_directive
, 0 },
1123 { "literal", xtensa_literal_pseudo
, 0 },
1124 { "frequency", xtensa_frequency_pseudo
, 0 },
1130 use_transform (void)
1132 /* After md_end, you should be checking frag by frag, rather
1133 than state directives. */
1134 gas_assert (!past_xtensa_end
);
1135 return directive_state
[directive_transform
];
1140 do_align_targets (void)
1142 /* Do not use this function after md_end; just look at align_targets
1143 instead. There is no target-align directive, so alignment is either
1144 enabled for all frags or not done at all. */
1145 gas_assert (!past_xtensa_end
);
1146 return align_targets
&& use_transform ();
1151 directive_push (directiveE directive
, bfd_boolean negated
, const void *datum
)
1155 state_stackS
*stack
= XNEW (state_stackS
);
1157 file
= as_where (&line
);
1159 stack
->directive
= directive
;
1160 stack
->negated
= negated
;
1161 stack
->old_state
= directive_state
[directive
];
1164 stack
->datum
= datum
;
1165 stack
->prev
= directive_state_stack
;
1166 directive_state_stack
= stack
;
1168 directive_state
[directive
] = !negated
;
1173 directive_pop (directiveE
*directive
,
1174 bfd_boolean
*negated
,
1179 state_stackS
*top
= directive_state_stack
;
1181 if (!directive_state_stack
)
1183 as_bad (_("unmatched .end directive"));
1184 *directive
= directive_none
;
1188 directive_state
[directive_state_stack
->directive
] = top
->old_state
;
1189 *directive
= top
->directive
;
1190 *negated
= top
->negated
;
1193 *datum
= top
->datum
;
1194 directive_state_stack
= top
->prev
;
1200 directive_balance (void)
1202 while (directive_state_stack
)
1204 directiveE directive
;
1205 bfd_boolean negated
;
1210 directive_pop (&directive
, &negated
, &file
, &line
, &datum
);
1211 as_warn_where ((char *) file
, line
,
1212 _(".begin directive with no matching .end directive"));
1218 inside_directive (directiveE dir
)
1220 state_stackS
*top
= directive_state_stack
;
1222 while (top
&& top
->directive
!= dir
)
1225 return (top
!= NULL
);
1230 get_directive (directiveE
*directive
, bfd_boolean
*negated
)
1234 const char *directive_string
;
1236 if (strncmp (input_line_pointer
, "no-", 3) != 0)
1241 input_line_pointer
+= 3;
1244 len
= strspn (input_line_pointer
,
1245 "abcdefghijklmnopqrstuvwxyz_-/0123456789.");
1247 /* This code is a hack to make .begin [no-][generics|relax] exactly
1248 equivalent to .begin [no-]transform. We should remove it when
1249 we stop accepting those options. */
1251 if (strncmp (input_line_pointer
, "generics", strlen ("generics")) == 0)
1253 as_warn (_("[no-]generics is deprecated; use [no-]transform instead"));
1254 directive_string
= "transform";
1256 else if (strncmp (input_line_pointer
, "relax", strlen ("relax")) == 0)
1258 as_warn (_("[no-]relax is deprecated; use [no-]transform instead"));
1259 directive_string
= "transform";
1262 directive_string
= input_line_pointer
;
1264 for (i
= 0; i
< sizeof (directive_info
) / sizeof (*directive_info
); ++i
)
1266 if (strncmp (directive_string
, directive_info
[i
].name
, len
) == 0)
1268 input_line_pointer
+= len
;
1269 *directive
= (directiveE
) i
;
1270 if (*negated
&& !directive_info
[i
].can_be_negated
)
1271 as_bad (_("directive %s cannot be negated"),
1272 directive_info
[i
].name
);
1277 as_bad (_("unknown directive"));
1278 *directive
= (directiveE
) XTENSA_UNDEFINED
;
1283 xtensa_begin_directive (int ignore ATTRIBUTE_UNUSED
)
1285 directiveE directive
;
1286 bfd_boolean negated
;
1290 get_directive (&directive
, &negated
);
1291 if (directive
== (directiveE
) XTENSA_UNDEFINED
)
1293 discard_rest_of_line ();
1297 if (cur_vinsn
.inside_bundle
)
1298 as_bad (_("directives are not valid inside bundles"));
1302 case directive_literal
:
1303 if (!inside_directive (directive_literal
))
1305 /* Previous labels go with whatever follows this directive, not with
1306 the literal, so save them now. */
1307 saved_insn_labels
= insn_labels
;
1310 as_warn (_(".begin literal is deprecated; use .literal instead"));
1311 state
= XNEW (emit_state
);
1312 xtensa_switch_to_literal_fragment (state
);
1313 directive_push (directive_literal
, negated
, state
);
1316 case directive_literal_prefix
:
1317 /* Have to flush pending output because a movi relaxed to an l32r
1318 might produce a literal. */
1319 md_flush_pending_output ();
1320 /* Check to see if the current fragment is a literal
1321 fragment. If it is, then this operation is not allowed. */
1322 if (generating_literals
)
1324 as_bad (_("cannot set literal_prefix inside literal fragment"));
1328 /* Allocate the literal state for this section and push
1329 onto the directive stack. */
1330 ls
= XNEW (lit_state
);
1333 *ls
= default_lit_sections
;
1334 directive_push (directive_literal_prefix
, negated
, ls
);
1336 /* Process the new prefix. */
1337 xtensa_literal_prefix ();
1340 case directive_freeregs
:
1341 /* This information is currently unused, but we'll accept the statement
1342 and just discard the rest of the line. This won't check the syntax,
1343 but it will accept every correct freeregs directive. */
1344 input_line_pointer
+= strcspn (input_line_pointer
, "\n");
1345 directive_push (directive_freeregs
, negated
, 0);
1348 case directive_schedule
:
1349 md_flush_pending_output ();
1350 frag_var (rs_fill
, 0, 0, frag_now
->fr_subtype
,
1351 frag_now
->fr_symbol
, frag_now
->fr_offset
, NULL
);
1352 directive_push (directive_schedule
, negated
, 0);
1353 xtensa_set_frag_assembly_state (frag_now
);
1356 case directive_density
:
1357 as_warn (_(".begin [no-]density is ignored"));
1360 case directive_absolute_literals
:
1361 md_flush_pending_output ();
1362 if (!absolute_literals_supported
&& !negated
)
1364 as_warn (_("Xtensa absolute literals option not supported; ignored"));
1367 xtensa_set_frag_assembly_state (frag_now
);
1368 directive_push (directive
, negated
, 0);
1372 md_flush_pending_output ();
1373 xtensa_set_frag_assembly_state (frag_now
);
1374 directive_push (directive
, negated
, 0);
1378 demand_empty_rest_of_line ();
1383 xtensa_end_directive (int ignore ATTRIBUTE_UNUSED
)
1385 directiveE begin_directive
, end_directive
;
1386 bfd_boolean begin_negated
, end_negated
;
1390 emit_state
**state_ptr
;
1393 if (cur_vinsn
.inside_bundle
)
1394 as_bad (_("directives are not valid inside bundles"));
1396 get_directive (&end_directive
, &end_negated
);
1398 md_flush_pending_output ();
1400 switch ((int) end_directive
)
1402 case XTENSA_UNDEFINED
:
1403 discard_rest_of_line ();
1406 case (int) directive_density
:
1407 as_warn (_(".end [no-]density is ignored"));
1408 demand_empty_rest_of_line ();
1411 case (int) directive_absolute_literals
:
1412 if (!absolute_literals_supported
&& !end_negated
)
1414 as_warn (_("Xtensa absolute literals option not supported; ignored"));
1415 demand_empty_rest_of_line ();
1424 state_ptr
= &state
; /* use state_ptr to avoid type-punning warning */
1425 directive_pop (&begin_directive
, &begin_negated
, &file
, &line
,
1426 (const void **) state_ptr
);
1428 if (begin_directive
!= directive_none
)
1430 if (begin_directive
!= end_directive
|| begin_negated
!= end_negated
)
1432 as_bad (_("does not match begin %s%s at %s:%d"),
1433 begin_negated
? "no-" : "",
1434 directive_info
[begin_directive
].name
, file
, line
);
1438 switch (end_directive
)
1440 case directive_literal
:
1441 frag_var (rs_fill
, 0, 0, 0, NULL
, 0, NULL
);
1442 xtensa_restore_emit_state (state
);
1443 xtensa_set_frag_assembly_state (frag_now
);
1445 if (!inside_directive (directive_literal
))
1447 /* Restore the list of current labels. */
1448 xtensa_clear_insn_labels ();
1449 insn_labels
= saved_insn_labels
;
1453 case directive_literal_prefix
:
1454 /* Restore the default collection sections from saved state. */
1455 s
= (lit_state
*) state
;
1457 default_lit_sections
= *s
;
1459 /* Free the state storage. */
1460 free (s
->lit_prefix
);
1464 case directive_schedule
:
1465 case directive_freeregs
:
1469 xtensa_set_frag_assembly_state (frag_now
);
1475 demand_empty_rest_of_line ();
1479 /* Place an aligned literal fragment at the current location. */
1482 xtensa_literal_position (int ignore ATTRIBUTE_UNUSED
)
1484 md_flush_pending_output ();
1486 if (inside_directive (directive_literal
))
1487 as_warn (_(".literal_position inside literal directive; ignoring"));
1488 xtensa_mark_literal_pool_location ();
1490 demand_empty_rest_of_line ();
1491 xtensa_clear_insn_labels ();
1495 /* Support .literal label, expr, ... */
1498 xtensa_literal_pseudo (int ignored ATTRIBUTE_UNUSED
)
1501 char *p
, *base_name
;
1505 if (inside_directive (directive_literal
))
1507 as_bad (_(".literal not allowed inside .begin literal region"));
1508 ignore_rest_of_line ();
1512 md_flush_pending_output ();
1514 /* Previous labels go with whatever follows this directive, not with
1515 the literal, so save them now. */
1516 saved_insn_labels
= insn_labels
;
1519 /* If we are using text-section literals, then this is the right value... */
1522 base_name
= input_line_pointer
;
1524 xtensa_switch_to_literal_fragment (&state
);
1526 /* ...but if we aren't using text-section-literals, then we
1527 need to put them in the section we just switched to. */
1528 if (use_literal_section
|| directive_state
[directive_absolute_literals
])
1531 /* FIXME, despite the previous comments, dest_seg is unused... */
1534 /* All literals are aligned to four-byte boundaries. */
1535 frag_align (2, 0, 0);
1536 record_alignment (now_seg
, 2);
1538 c
= get_symbol_name (&base_name
);
1539 /* Just after name is now '\0'. */
1540 p
= input_line_pointer
;
1542 SKIP_WHITESPACE_AFTER_NAME ();
1544 if (*input_line_pointer
!= ',' && *input_line_pointer
!= ':')
1546 as_bad (_("expected comma or colon after symbol name; "
1547 "rest of line ignored"));
1548 ignore_rest_of_line ();
1549 xtensa_restore_emit_state (&state
);
1557 input_line_pointer
++; /* skip ',' or ':' */
1559 xtensa_elf_cons (4);
1561 xtensa_restore_emit_state (&state
);
1563 /* Restore the list of current labels. */
1564 xtensa_clear_insn_labels ();
1565 insn_labels
= saved_insn_labels
;
1570 xtensa_literal_prefix (void)
1575 /* Parse the new prefix from the input_line_pointer. */
1577 len
= strspn (input_line_pointer
,
1578 "ABCDEFGHIJKLMNOPQRSTUVWXYZ"
1579 "abcdefghijklmnopqrstuvwxyz_/0123456789.$");
1581 /* Get a null-terminated copy of the name. */
1582 name
= xmemdup0 (input_line_pointer
, len
);
1584 /* Skip the name in the input line. */
1585 input_line_pointer
+= len
;
1587 default_lit_sections
.lit_prefix
= name
;
1589 /* Clear cached literal sections, since the prefix has changed. */
1590 default_lit_sections
.lit_seg
= NULL
;
1591 default_lit_sections
.lit4_seg
= NULL
;
1595 /* Support ".frequency branch_target_frequency fall_through_frequency". */
1598 xtensa_frequency_pseudo (int ignored ATTRIBUTE_UNUSED
)
1600 float fall_through_f
, target_f
;
1602 fall_through_f
= (float) strtod (input_line_pointer
, &input_line_pointer
);
1603 if (fall_through_f
< 0)
1605 as_bad (_("fall through frequency must be greater than 0"));
1606 ignore_rest_of_line ();
1610 target_f
= (float) strtod (input_line_pointer
, &input_line_pointer
);
1613 as_bad (_("branch target frequency must be greater than 0"));
1614 ignore_rest_of_line ();
1618 set_subseg_freq (now_seg
, now_subseg
, target_f
+ fall_through_f
, target_f
);
1620 demand_empty_rest_of_line ();
1624 /* Like normal .long/.short/.word, except support @plt, etc.
1625 Clobbers input_line_pointer, checks end-of-line. */
1628 xtensa_elf_cons (int nbytes
)
1631 bfd_reloc_code_real_type reloc
;
1633 md_flush_pending_output ();
1635 if (cur_vinsn
.inside_bundle
)
1636 as_bad (_("directives are not valid inside bundles"));
1638 if (is_it_end_of_statement ())
1640 demand_empty_rest_of_line ();
1647 if (exp
.X_op
== O_symbol
1648 && *input_line_pointer
== '@'
1649 && ((reloc
= xtensa_elf_suffix (&input_line_pointer
, &exp
))
1652 reloc_howto_type
*reloc_howto
=
1653 bfd_reloc_type_lookup (stdoutput
, reloc
);
1655 if (reloc
== BFD_RELOC_UNUSED
|| !reloc_howto
)
1656 as_bad (_("unsupported relocation"));
1657 else if ((reloc
>= BFD_RELOC_XTENSA_SLOT0_OP
1658 && reloc
<= BFD_RELOC_XTENSA_SLOT14_OP
)
1659 || (reloc
>= BFD_RELOC_XTENSA_SLOT0_ALT
1660 && reloc
<= BFD_RELOC_XTENSA_SLOT14_ALT
))
1661 as_bad (_("opcode-specific %s relocation used outside "
1662 "an instruction"), reloc_howto
->name
);
1663 else if (nbytes
!= (int) bfd_get_reloc_size (reloc_howto
))
1664 as_bad (ngettext ("%s relocations do not fit in %d byte",
1665 "%s relocations do not fit in %d bytes",
1667 reloc_howto
->name
, nbytes
);
1668 else if (reloc
== BFD_RELOC_XTENSA_TLS_FUNC
1669 || reloc
== BFD_RELOC_XTENSA_TLS_ARG
1670 || reloc
== BFD_RELOC_XTENSA_TLS_CALL
)
1671 as_bad (_("invalid use of %s relocation"), reloc_howto
->name
);
1674 char *p
= frag_more ((int) nbytes
);
1675 xtensa_set_frag_assembly_state (frag_now
);
1676 fix_new_exp (frag_now
, p
- frag_now
->fr_literal
,
1677 nbytes
, &exp
, reloc_howto
->pc_relative
, reloc
);
1682 xtensa_set_frag_assembly_state (frag_now
);
1683 emit_expr (&exp
, (unsigned int) nbytes
);
1686 while (*input_line_pointer
++ == ',');
1688 input_line_pointer
--; /* Put terminator back into stream. */
1689 demand_empty_rest_of_line ();
1692 static bfd_boolean is_leb128_expr
;
1695 xtensa_leb128 (int sign
)
1697 is_leb128_expr
= TRUE
;
1699 is_leb128_expr
= FALSE
;
1703 /* Parsing and Idiom Translation. */
1705 /* Parse @plt, etc. and return the desired relocation. */
1706 static bfd_reloc_code_real_type
1707 xtensa_elf_suffix (char **str_p
, expressionS
*exp_p
)
1717 return BFD_RELOC_NONE
;
1719 for (ch
= *str
, str2
= ident
;
1720 (str2
< ident
+ sizeof (ident
) - 1
1721 && (ISALNUM (ch
) || ch
== '@'));
1724 *str2
++ = (ISLOWER (ch
)) ? ch
: TOLOWER (ch
);
1731 for (i
= 0; i
< ARRAY_SIZE (suffix_relocs
); i
++)
1732 if (ch
== suffix_relocs
[i
].suffix
[0]
1733 && len
== suffix_relocs
[i
].length
1734 && memcmp (ident
, suffix_relocs
[i
].suffix
, suffix_relocs
[i
].length
) == 0)
1736 /* Now check for "identifier@suffix+constant". */
1737 if (*str
== '-' || *str
== '+')
1739 char *orig_line
= input_line_pointer
;
1740 expressionS new_exp
;
1742 input_line_pointer
= str
;
1743 expression (&new_exp
);
1744 if (new_exp
.X_op
== O_constant
)
1746 exp_p
->X_add_number
+= new_exp
.X_add_number
;
1747 str
= input_line_pointer
;
1750 if (&input_line_pointer
!= str_p
)
1751 input_line_pointer
= orig_line
;
1755 return suffix_relocs
[i
].reloc
;
1758 return BFD_RELOC_UNUSED
;
1762 /* Find the matching operator type. */
1764 map_suffix_reloc_to_operator (bfd_reloc_code_real_type reloc
)
1766 operatorT
operator = O_illegal
;
1769 for (i
= 0; i
< ARRAY_SIZE (suffix_relocs
); i
++)
1771 if (suffix_relocs
[i
].reloc
== reloc
)
1773 operator = suffix_relocs
[i
].operator;
1777 gas_assert (operator != O_illegal
);
1782 /* Find the matching reloc type. */
1783 static bfd_reloc_code_real_type
1784 map_operator_to_reloc (unsigned char operator, bfd_boolean is_literal
)
1787 bfd_reloc_code_real_type reloc
= BFD_RELOC_UNUSED
;
1789 for (i
= 0; i
< ARRAY_SIZE (suffix_relocs
); i
++)
1791 if (suffix_relocs
[i
].operator == operator)
1793 reloc
= suffix_relocs
[i
].reloc
;
1800 if (reloc
== BFD_RELOC_XTENSA_TLS_FUNC
)
1801 return BFD_RELOC_XTENSA_TLSDESC_FN
;
1802 else if (reloc
== BFD_RELOC_XTENSA_TLS_ARG
)
1803 return BFD_RELOC_XTENSA_TLSDESC_ARG
;
1806 if (reloc
== BFD_RELOC_UNUSED
)
1807 return BFD_RELOC_32
;
1814 expression_end (const char *name
)
1837 #define ERROR_REG_NUM ((unsigned) -1)
1840 tc_get_register (const char *prefix
)
1843 const char *next_expr
;
1844 const char *old_line_pointer
;
1847 old_line_pointer
= input_line_pointer
;
1849 if (*input_line_pointer
== '$')
1850 ++input_line_pointer
;
1852 /* Accept "sp" as a synonym for "a1". */
1853 if (input_line_pointer
[0] == 's' && input_line_pointer
[1] == 'p'
1854 && expression_end (input_line_pointer
+ 2))
1856 input_line_pointer
+= 2;
1857 return 1; /* AR[1] */
1860 while (*input_line_pointer
++ == *prefix
++)
1862 --input_line_pointer
;
1867 as_bad (_("bad register name: %s"), old_line_pointer
);
1868 return ERROR_REG_NUM
;
1871 if (!ISDIGIT ((unsigned char) *input_line_pointer
))
1873 as_bad (_("bad register number: %s"), input_line_pointer
);
1874 return ERROR_REG_NUM
;
1879 while (ISDIGIT ((int) *input_line_pointer
))
1880 reg
= reg
* 10 + *input_line_pointer
++ - '0';
1882 if (!(next_expr
= expression_end (input_line_pointer
)))
1884 as_bad (_("bad register name: %s"), old_line_pointer
);
1885 return ERROR_REG_NUM
;
1888 input_line_pointer
= (char *) next_expr
;
1895 expression_maybe_register (xtensa_opcode opc
, int opnd
, expressionS
*tok
)
1897 xtensa_isa isa
= xtensa_default_isa
;
1899 /* Check if this is an immediate operand. */
1900 if (xtensa_operand_is_register (isa
, opc
, opnd
) == 0)
1902 bfd_reloc_code_real_type reloc
;
1903 segT t
= expression (tok
);
1905 if (t
== absolute_section
1906 && xtensa_operand_is_PCrelative (isa
, opc
, opnd
) == 1)
1908 gas_assert (tok
->X_op
== O_constant
);
1909 tok
->X_op
= O_symbol
;
1910 tok
->X_add_symbol
= &abs_symbol
;
1913 if ((tok
->X_op
== O_constant
|| tok
->X_op
== O_symbol
)
1914 && ((reloc
= xtensa_elf_suffix (&input_line_pointer
, tok
))
1919 case BFD_RELOC_LO16
:
1920 if (tok
->X_op
== O_constant
)
1922 tok
->X_add_number
&= 0xffff;
1926 case BFD_RELOC_HI16
:
1927 if (tok
->X_op
== O_constant
)
1929 tok
->X_add_number
= ((unsigned) tok
->X_add_number
) >> 16;
1933 case BFD_RELOC_UNUSED
:
1934 as_bad (_("unsupported relocation"));
1936 case BFD_RELOC_32_PCREL
:
1937 as_bad (_("pcrel relocation not allowed in an instruction"));
1942 tok
->X_op
= map_suffix_reloc_to_operator (reloc
);
1947 xtensa_regfile opnd_rf
= xtensa_operand_regfile (isa
, opc
, opnd
);
1948 unsigned reg
= tc_get_register (xtensa_regfile_shortname (isa
, opnd_rf
));
1950 if (reg
!= ERROR_REG_NUM
) /* Already errored */
1953 if (xtensa_operand_encode (isa
, opc
, opnd
, &buf
))
1954 as_bad (_("register number out of range"));
1957 tok
->X_op
= O_register
;
1958 tok
->X_add_symbol
= 0;
1959 tok
->X_add_number
= reg
;
1964 /* Split up the arguments for an opcode or pseudo-op. */
1967 tokenize_arguments (char **args
, char *str
)
1969 char *old_input_line_pointer
;
1970 bfd_boolean saw_comma
= FALSE
;
1971 bfd_boolean saw_arg
= FALSE
;
1972 bfd_boolean saw_colon
= FALSE
;
1974 char *arg_end
, *arg
;
1977 /* Save and restore input_line_pointer around this function. */
1978 old_input_line_pointer
= input_line_pointer
;
1979 input_line_pointer
= str
;
1981 while (*input_line_pointer
)
1984 switch (*input_line_pointer
)
1991 input_line_pointer
++;
1992 if (saw_comma
|| saw_colon
|| !saw_arg
)
1998 input_line_pointer
++;
1999 if (saw_comma
|| saw_colon
|| !saw_arg
)
2005 if (!saw_comma
&& !saw_colon
&& saw_arg
)
2008 arg_end
= input_line_pointer
+ 1;
2009 while (!expression_end (arg_end
))
2012 arg_len
= arg_end
- input_line_pointer
;
2013 arg
= XNEWVEC (char, (saw_colon
? 1 : 0) + arg_len
+ 1);
2014 args
[num_args
] = arg
;
2018 strncpy (arg
, input_line_pointer
, arg_len
);
2019 arg
[arg_len
] = '\0';
2021 input_line_pointer
= arg_end
;
2031 if (saw_comma
|| saw_colon
)
2033 input_line_pointer
= old_input_line_pointer
;
2038 as_bad (_("extra comma"));
2040 as_bad (_("extra colon"));
2042 as_bad (_("missing argument"));
2044 as_bad (_("missing comma or colon"));
2045 input_line_pointer
= old_input_line_pointer
;
2050 /* Parse the arguments to an opcode. Return TRUE on error. */
2053 parse_arguments (TInsn
*insn
, int num_args
, char **arg_strings
)
2055 expressionS
*tok
, *last_tok
;
2056 xtensa_opcode opcode
= insn
->opcode
;
2057 bfd_boolean had_error
= TRUE
;
2058 xtensa_isa isa
= xtensa_default_isa
;
2059 int n
, num_regs
= 0;
2060 int opcode_operand_count
;
2061 int opnd_cnt
, last_opnd_cnt
;
2062 unsigned int next_reg
= 0;
2063 char *old_input_line_pointer
;
2065 if (insn
->insn_type
== ITYPE_LITERAL
)
2066 opcode_operand_count
= 1;
2068 opcode_operand_count
= xtensa_opcode_num_operands (isa
, opcode
);
2071 memset (tok
, 0, sizeof (*tok
) * MAX_INSN_ARGS
);
2073 /* Save and restore input_line_pointer around this function. */
2074 old_input_line_pointer
= input_line_pointer
;
2080 /* Skip invisible operands. */
2081 while (xtensa_operand_is_visible (isa
, opcode
, opnd_cnt
) == 0)
2087 for (n
= 0; n
< num_args
; n
++)
2089 input_line_pointer
= arg_strings
[n
];
2090 if (*input_line_pointer
== ':')
2092 xtensa_regfile opnd_rf
;
2093 input_line_pointer
++;
2096 gas_assert (opnd_cnt
> 0);
2098 opnd_rf
= xtensa_operand_regfile (isa
, opcode
, last_opnd_cnt
);
2100 != tc_get_register (xtensa_regfile_shortname (isa
, opnd_rf
)))
2101 as_warn (_("incorrect register number, ignoring"));
2106 if (opnd_cnt
>= opcode_operand_count
)
2108 as_warn (_("too many arguments"));
2111 gas_assert (opnd_cnt
< MAX_INSN_ARGS
);
2113 expression_maybe_register (opcode
, opnd_cnt
, tok
);
2114 next_reg
= tok
->X_add_number
+ 1;
2116 if (tok
->X_op
== O_illegal
|| tok
->X_op
== O_absent
)
2118 if (xtensa_operand_is_register (isa
, opcode
, opnd_cnt
) == 1)
2120 num_regs
= xtensa_operand_num_regs (isa
, opcode
, opnd_cnt
) - 1;
2121 /* minus 1 because we are seeing one right now */
2127 last_opnd_cnt
= opnd_cnt
;
2128 demand_empty_rest_of_line ();
2135 while (xtensa_operand_is_visible (isa
, opcode
, opnd_cnt
) == 0);
2139 if (num_regs
> 0 && ((int) next_reg
!= last_tok
->X_add_number
+ 1))
2142 insn
->ntok
= tok
- insn
->tok
;
2146 input_line_pointer
= old_input_line_pointer
;
2152 get_invisible_operands (TInsn
*insn
)
2154 xtensa_isa isa
= xtensa_default_isa
;
2155 static xtensa_insnbuf slotbuf
= NULL
;
2157 xtensa_opcode opc
= insn
->opcode
;
2158 int slot
, opnd
, fmt_found
;
2162 slotbuf
= xtensa_insnbuf_alloc (isa
);
2164 /* Find format/slot where this can be encoded. */
2167 for (fmt
= 0; fmt
< xtensa_isa_num_formats (isa
); fmt
++)
2169 for (slot
= 0; slot
< xtensa_format_num_slots (isa
, fmt
); slot
++)
2171 if (xtensa_opcode_encode (isa
, fmt
, slot
, slotbuf
, opc
) == 0)
2177 if (fmt_found
) break;
2182 as_bad (_("cannot encode opcode \"%s\""), xtensa_opcode_name (isa
, opc
));
2186 /* First encode all the visible operands
2187 (to deal with shared field operands). */
2188 for (opnd
= 0; opnd
< insn
->ntok
; opnd
++)
2190 if (xtensa_operand_is_visible (isa
, opc
, opnd
) == 1
2191 && (insn
->tok
[opnd
].X_op
== O_register
2192 || insn
->tok
[opnd
].X_op
== O_constant
))
2194 val
= insn
->tok
[opnd
].X_add_number
;
2195 xtensa_operand_encode (isa
, opc
, opnd
, &val
);
2196 xtensa_operand_set_field (isa
, opc
, opnd
, fmt
, slot
, slotbuf
, val
);
2200 /* Then pull out the values for the invisible ones. */
2201 for (opnd
= 0; opnd
< insn
->ntok
; opnd
++)
2203 if (xtensa_operand_is_visible (isa
, opc
, opnd
) == 0)
2205 xtensa_operand_get_field (isa
, opc
, opnd
, fmt
, slot
, slotbuf
, &val
);
2206 xtensa_operand_decode (isa
, opc
, opnd
, &val
);
2207 insn
->tok
[opnd
].X_add_number
= val
;
2208 if (xtensa_operand_is_register (isa
, opc
, opnd
) == 1)
2209 insn
->tok
[opnd
].X_op
= O_register
;
2211 insn
->tok
[opnd
].X_op
= O_constant
;
2220 xg_reverse_shift_count (char **cnt_argp
)
2222 char *cnt_arg
, *new_arg
;
2223 cnt_arg
= *cnt_argp
;
2225 /* replace the argument with "31-(argument)" */
2226 new_arg
= concat ("31-(", cnt_arg
, ")", (char *) NULL
);
2229 *cnt_argp
= new_arg
;
2233 /* If "arg" is a constant expression, return non-zero with the value
2237 xg_arg_is_constant (char *arg
, offsetT
*valp
)
2240 char *save_ptr
= input_line_pointer
;
2242 input_line_pointer
= arg
;
2244 input_line_pointer
= save_ptr
;
2246 if (exp
.X_op
== O_constant
)
2248 *valp
= exp
.X_add_number
;
2257 xg_replace_opname (char **popname
, const char *newop
)
2260 *popname
= xstrdup (newop
);
2265 xg_check_num_args (int *pnum_args
,
2270 int num_args
= *pnum_args
;
2272 if (num_args
< expected_num
)
2274 as_bad (_("not enough operands (%d) for '%s'; expected %d"),
2275 num_args
, opname
, expected_num
);
2279 if (num_args
> expected_num
)
2281 as_warn (_("too many operands (%d) for '%s'; expected %d"),
2282 num_args
, opname
, expected_num
);
2283 while (num_args
-- > expected_num
)
2285 free (arg_strings
[num_args
]);
2286 arg_strings
[num_args
] = 0;
2288 *pnum_args
= expected_num
;
2296 /* If the register is not specified as part of the opcode,
2297 then get it from the operand and move it to the opcode. */
2300 xg_translate_sysreg_op (char **popname
, int *pnum_args
, char **arg_strings
)
2302 xtensa_isa isa
= xtensa_default_isa
;
2304 char *opname
, *new_opname
;
2305 const char *sr_name
;
2306 int is_user
, is_write
;
2311 is_user
= (opname
[1] == 'u');
2312 is_write
= (opname
[0] == 'w');
2314 /* Opname == [rw]ur or [rwx]sr... */
2316 if (xg_check_num_args (pnum_args
, 2, opname
, arg_strings
))
2319 /* Check if the argument is a symbolic register name. */
2320 sr
= xtensa_sysreg_lookup_name (isa
, arg_strings
[1]);
2321 /* Handle WSR to "INTSET" as a special case. */
2322 if (sr
== XTENSA_UNDEFINED
&& is_write
&& !is_user
2323 && !strcasecmp (arg_strings
[1], "intset"))
2324 sr
= xtensa_sysreg_lookup_name (isa
, "interrupt");
2325 if (sr
== XTENSA_UNDEFINED
2326 || (xtensa_sysreg_is_user (isa
, sr
) == 1) != is_user
)
2328 /* Maybe it's a register number.... */
2330 if (!xg_arg_is_constant (arg_strings
[1], &val
))
2332 as_bad (_("invalid register '%s' for '%s' instruction"),
2333 arg_strings
[1], opname
);
2336 sr
= xtensa_sysreg_lookup (isa
, val
, is_user
);
2337 if (sr
== XTENSA_UNDEFINED
)
2339 as_bad (_("invalid register number (%ld) for '%s' instruction"),
2340 (long) val
, opname
);
2345 /* Remove the last argument, which is now part of the opcode. */
2346 free (arg_strings
[1]);
2350 /* Translate the opcode. */
2351 sr_name
= xtensa_sysreg_name (isa
, sr
);
2352 /* Another special case for "WSR.INTSET".... */
2353 if (is_write
&& !is_user
&& !strcasecmp ("interrupt", sr_name
))
2355 new_opname
= concat (*popname
, ".", sr_name
, (char *) NULL
);
2357 *popname
= new_opname
;
2364 xtensa_translate_old_userreg_ops (char **popname
)
2366 xtensa_isa isa
= xtensa_default_isa
;
2368 char *opname
, *new_opname
;
2369 const char *sr_name
;
2370 bfd_boolean has_underbar
= FALSE
;
2373 if (opname
[0] == '_')
2375 has_underbar
= TRUE
;
2379 sr
= xtensa_sysreg_lookup_name (isa
, opname
+ 1);
2380 if (sr
!= XTENSA_UNDEFINED
)
2382 /* The new default name ("nnn") is different from the old default
2383 name ("URnnn"). The old default is handled below, and we don't
2384 want to recognize [RW]nnn, so do nothing if the name is the (new)
2386 static char namebuf
[10];
2387 sprintf (namebuf
, "%d", xtensa_sysreg_number (isa
, sr
));
2388 if (strcmp (namebuf
, opname
+ 1) == 0)
2396 /* Only continue if the reg name is "URnnn". */
2397 if (opname
[1] != 'u' || opname
[2] != 'r')
2399 val
= strtoul (opname
+ 3, &end
, 10);
2403 sr
= xtensa_sysreg_lookup (isa
, val
, 1);
2404 if (sr
== XTENSA_UNDEFINED
)
2406 as_bad (_("invalid register number (%ld) for '%s'"),
2407 (long) val
, opname
);
2412 /* Translate the opcode. */
2413 sr_name
= xtensa_sysreg_name (isa
, sr
);
2414 new_opname
= XNEWVEC (char, strlen (sr_name
) + 6);
2415 sprintf (new_opname
, "%s%cur.%s", (has_underbar
? "_" : ""),
2416 opname
[0], sr_name
);
2418 *popname
= new_opname
;
2425 xtensa_translate_zero_immed (const char *old_op
,
2435 gas_assert (opname
[0] != '_');
2437 if (strcmp (opname
, old_op
) != 0)
2440 if (xg_check_num_args (pnum_args
, 3, opname
, arg_strings
))
2442 if (xg_arg_is_constant (arg_strings
[1], &val
) && val
== 0)
2444 xg_replace_opname (popname
, new_op
);
2445 free (arg_strings
[1]);
2446 arg_strings
[1] = arg_strings
[2];
2455 /* If the instruction is an idiom (i.e., a built-in macro), translate it.
2456 Returns non-zero if an error was found. */
2459 xg_translate_idioms (char **popname
, int *pnum_args
, char **arg_strings
)
2461 char *opname
= *popname
;
2462 bfd_boolean has_underbar
= FALSE
;
2466 has_underbar
= TRUE
;
2470 if (strcmp (opname
, "mov") == 0)
2472 if (use_transform () && !has_underbar
&& density_supported
)
2473 xg_replace_opname (popname
, "mov.n");
2476 if (xg_check_num_args (pnum_args
, 2, opname
, arg_strings
))
2478 xg_replace_opname (popname
, (has_underbar
? "_or" : "or"));
2479 arg_strings
[2] = xstrdup (arg_strings
[1]);
2485 if (strcmp (opname
, "bbsi.l") == 0)
2487 if (xg_check_num_args (pnum_args
, 3, opname
, arg_strings
))
2489 xg_replace_opname (popname
, (has_underbar
? "_bbsi" : "bbsi"));
2490 if (target_big_endian
)
2491 xg_reverse_shift_count (&arg_strings
[1]);
2495 if (strcmp (opname
, "bbci.l") == 0)
2497 if (xg_check_num_args (pnum_args
, 3, opname
, arg_strings
))
2499 xg_replace_opname (popname
, (has_underbar
? "_bbci" : "bbci"));
2500 if (target_big_endian
)
2501 xg_reverse_shift_count (&arg_strings
[1]);
2505 /* Don't do anything special with NOPs inside FLIX instructions. They
2506 are handled elsewhere. Real NOP instructions are always available
2507 in configurations with FLIX, so this should never be an issue but
2508 check for it anyway. */
2509 if (!cur_vinsn
.inside_bundle
&& xtensa_nop_opcode
== XTENSA_UNDEFINED
2510 && strcmp (opname
, "nop") == 0)
2512 if (use_transform () && !has_underbar
&& density_supported
)
2513 xg_replace_opname (popname
, "nop.n");
2516 if (xg_check_num_args (pnum_args
, 0, opname
, arg_strings
))
2518 xg_replace_opname (popname
, (has_underbar
? "_or" : "or"));
2519 arg_strings
[0] = xstrdup ("a1");
2520 arg_strings
[1] = xstrdup ("a1");
2521 arg_strings
[2] = xstrdup ("a1");
2527 /* Recognize [RW]UR and [RWX]SR. */
2528 if ((((opname
[0] == 'r' || opname
[0] == 'w')
2529 && (opname
[1] == 'u' || opname
[1] == 's'))
2530 || (opname
[0] == 'x' && opname
[1] == 's'))
2532 && opname
[3] == '\0')
2533 return xg_translate_sysreg_op (popname
, pnum_args
, arg_strings
);
2535 /* Backward compatibility for RUR and WUR: Recognize [RW]UR<nnn> and
2536 [RW]<name> if <name> is the non-default name of a user register. */
2537 if ((opname
[0] == 'r' || opname
[0] == 'w')
2538 && xtensa_opcode_lookup (xtensa_default_isa
, opname
) == XTENSA_UNDEFINED
)
2539 return xtensa_translate_old_userreg_ops (popname
);
2541 /* Relax branches that don't allow comparisons against an immediate value
2542 of zero to the corresponding branches with implicit zero immediates. */
2543 if (!has_underbar
&& use_transform ())
2545 if (xtensa_translate_zero_immed ("bnei", "bnez", popname
,
2546 pnum_args
, arg_strings
))
2549 if (xtensa_translate_zero_immed ("beqi", "beqz", popname
,
2550 pnum_args
, arg_strings
))
2553 if (xtensa_translate_zero_immed ("bgei", "bgez", popname
,
2554 pnum_args
, arg_strings
))
2557 if (xtensa_translate_zero_immed ("blti", "bltz", popname
,
2558 pnum_args
, arg_strings
))
2566 /* Functions for dealing with the Xtensa ISA. */
2568 /* Currently the assembler only allows us to use a single target per
2569 fragment. Because of this, only one operand for a given
2570 instruction may be symbolic. If there is a PC-relative operand,
2571 the last one is chosen. Otherwise, the result is the number of the
2572 last immediate operand, and if there are none of those, we fail and
2576 get_relaxable_immed (xtensa_opcode opcode
)
2578 int last_immed
= -1;
2581 if (opcode
== XTENSA_UNDEFINED
)
2584 noperands
= xtensa_opcode_num_operands (xtensa_default_isa
, opcode
);
2585 for (opi
= noperands
- 1; opi
>= 0; opi
--)
2587 if (xtensa_operand_is_visible (xtensa_default_isa
, opcode
, opi
) == 0)
2589 if (xtensa_operand_is_PCrelative (xtensa_default_isa
, opcode
, opi
) == 1)
2591 if (last_immed
== -1
2592 && xtensa_operand_is_register (xtensa_default_isa
, opcode
, opi
) == 0)
2599 static xtensa_opcode
2600 get_opcode_from_buf (const char *buf
, int slot
)
2602 static xtensa_insnbuf insnbuf
= NULL
;
2603 static xtensa_insnbuf slotbuf
= NULL
;
2604 xtensa_isa isa
= xtensa_default_isa
;
2609 insnbuf
= xtensa_insnbuf_alloc (isa
);
2610 slotbuf
= xtensa_insnbuf_alloc (isa
);
2613 xtensa_insnbuf_from_chars (isa
, insnbuf
, (const unsigned char *) buf
, 0);
2614 fmt
= xtensa_format_decode (isa
, insnbuf
);
2615 if (fmt
== XTENSA_UNDEFINED
)
2616 return XTENSA_UNDEFINED
;
2618 if (slot
>= xtensa_format_num_slots (isa
, fmt
))
2619 return XTENSA_UNDEFINED
;
2621 xtensa_format_get_slot (isa
, fmt
, slot
, insnbuf
, slotbuf
);
2622 return xtensa_opcode_decode (isa
, fmt
, slot
, slotbuf
);
2626 #ifdef TENSILICA_DEBUG
2628 /* For debugging, print out the mapping of opcode numbers to opcodes. */
2631 xtensa_print_insn_table (void)
2633 int num_opcodes
, num_operands
;
2634 xtensa_opcode opcode
;
2635 xtensa_isa isa
= xtensa_default_isa
;
2637 num_opcodes
= xtensa_isa_num_opcodes (xtensa_default_isa
);
2638 for (opcode
= 0; opcode
< num_opcodes
; opcode
++)
2641 fprintf (stderr
, "%d: %s: ", opcode
, xtensa_opcode_name (isa
, opcode
));
2642 num_operands
= xtensa_opcode_num_operands (isa
, opcode
);
2643 for (opn
= 0; opn
< num_operands
; opn
++)
2645 if (xtensa_operand_is_visible (isa
, opcode
, opn
) == 0)
2647 if (xtensa_operand_is_register (isa
, opcode
, opn
) == 1)
2649 xtensa_regfile opnd_rf
=
2650 xtensa_operand_regfile (isa
, opcode
, opn
);
2651 fprintf (stderr
, "%s ", xtensa_regfile_shortname (isa
, opnd_rf
));
2653 else if (xtensa_operand_is_PCrelative (isa
, opcode
, opn
) == 1)
2654 fputs ("[lLr] ", stderr
);
2656 fputs ("i ", stderr
);
2658 fprintf (stderr
, "\n");
2664 print_vliw_insn (xtensa_insnbuf vbuf
)
2666 xtensa_isa isa
= xtensa_default_isa
;
2667 xtensa_format f
= xtensa_format_decode (isa
, vbuf
);
2668 xtensa_insnbuf sbuf
= xtensa_insnbuf_alloc (isa
);
2671 fprintf (stderr
, "format = %d\n", f
);
2673 for (op
= 0; op
< xtensa_format_num_slots (isa
, f
); op
++)
2675 xtensa_opcode opcode
;
2679 xtensa_format_get_slot (isa
, f
, op
, vbuf
, sbuf
);
2680 opcode
= xtensa_opcode_decode (isa
, f
, op
, sbuf
);
2681 opname
= xtensa_opcode_name (isa
, opcode
);
2683 fprintf (stderr
, "op in slot %i is %s;\n", op
, opname
);
2684 fprintf (stderr
, " operands = ");
2686 operands
< xtensa_opcode_num_operands (isa
, opcode
);
2690 if (xtensa_operand_is_visible (isa
, opcode
, operands
) == 0)
2692 xtensa_operand_get_field (isa
, opcode
, operands
, f
, op
, sbuf
, &val
);
2693 xtensa_operand_decode (isa
, opcode
, operands
, &val
);
2694 fprintf (stderr
, "%d ", val
);
2696 fprintf (stderr
, "\n");
2698 xtensa_insnbuf_free (isa
, sbuf
);
2701 #endif /* TENSILICA_DEBUG */
2705 is_direct_call_opcode (xtensa_opcode opcode
)
2707 xtensa_isa isa
= xtensa_default_isa
;
2708 int n
, num_operands
;
2710 if (xtensa_opcode_is_call (isa
, opcode
) != 1)
2713 num_operands
= xtensa_opcode_num_operands (isa
, opcode
);
2714 for (n
= 0; n
< num_operands
; n
++)
2716 if (xtensa_operand_is_register (isa
, opcode
, n
) == 0
2717 && xtensa_operand_is_PCrelative (isa
, opcode
, n
) == 1)
2724 /* Convert from BFD relocation type code to slot and operand number.
2725 Returns non-zero on failure. */
2728 decode_reloc (bfd_reloc_code_real_type reloc
, int *slot
, bfd_boolean
*is_alt
)
2730 if (reloc
>= BFD_RELOC_XTENSA_SLOT0_OP
2731 && reloc
<= BFD_RELOC_XTENSA_SLOT14_OP
)
2733 *slot
= reloc
- BFD_RELOC_XTENSA_SLOT0_OP
;
2736 else if (reloc
>= BFD_RELOC_XTENSA_SLOT0_ALT
2737 && reloc
<= BFD_RELOC_XTENSA_SLOT14_ALT
)
2739 *slot
= reloc
- BFD_RELOC_XTENSA_SLOT0_ALT
;
2749 /* Convert from slot number to BFD relocation type code for the
2750 standard PC-relative relocations. Return BFD_RELOC_NONE on
2753 static bfd_reloc_code_real_type
2754 encode_reloc (int slot
)
2756 if (slot
< 0 || slot
> 14)
2757 return BFD_RELOC_NONE
;
2759 return BFD_RELOC_XTENSA_SLOT0_OP
+ slot
;
2763 /* Convert from slot numbers to BFD relocation type code for the
2764 "alternate" relocations. Return BFD_RELOC_NONE on failure. */
2766 static bfd_reloc_code_real_type
2767 encode_alt_reloc (int slot
)
2769 if (slot
< 0 || slot
> 14)
2770 return BFD_RELOC_NONE
;
2772 return BFD_RELOC_XTENSA_SLOT0_ALT
+ slot
;
2777 xtensa_insnbuf_set_operand (xtensa_insnbuf slotbuf
,
2780 xtensa_opcode opcode
,
2786 uint32 valbuf
= value
;
2788 if (xtensa_operand_encode (xtensa_default_isa
, opcode
, operand
, &valbuf
))
2790 if (xtensa_operand_is_PCrelative (xtensa_default_isa
, opcode
, operand
)
2792 as_bad_where ((char *) file
, line
,
2793 _("operand %d of '%s' has out of range value '%u'"),
2795 xtensa_opcode_name (xtensa_default_isa
, opcode
),
2798 as_bad_where ((char *) file
, line
,
2799 _("operand %d of '%s' has invalid value '%u'"),
2801 xtensa_opcode_name (xtensa_default_isa
, opcode
),
2806 xtensa_operand_set_field (xtensa_default_isa
, opcode
, operand
, fmt
, slot
,
2812 xtensa_insnbuf_get_operand (xtensa_insnbuf slotbuf
,
2815 xtensa_opcode opcode
,
2819 (void) xtensa_operand_get_field (xtensa_default_isa
, opcode
, opnum
,
2820 fmt
, slot
, slotbuf
, &val
);
2821 (void) xtensa_operand_decode (xtensa_default_isa
, opcode
, opnum
, &val
);
2826 /* Checks for rules from xtensa-relax tables. */
2828 /* The routine xg_instruction_matches_option_term must return TRUE
2829 when a given option term is true. The meaning of all of the option
2830 terms is given interpretation by this function. */
2833 xg_instruction_matches_option_term (TInsn
*insn
, const ReqOrOption
*option
)
2835 if (strcmp (option
->option_name
, "realnop") == 0
2836 || strncmp (option
->option_name
, "IsaUse", 6) == 0)
2838 /* These conditions were evaluated statically when building the
2839 relaxation table. There's no need to reevaluate them now. */
2842 else if (strcmp (option
->option_name
, "FREEREG") == 0)
2843 return insn
->extra_arg
.X_op
== O_register
;
2846 as_fatal (_("internal error: unknown option name '%s'"),
2847 option
->option_name
);
2853 xg_instruction_matches_or_options (TInsn
*insn
,
2854 const ReqOrOptionList
*or_option
)
2856 const ReqOrOption
*option
;
2857 /* Must match each of the AND terms. */
2858 for (option
= or_option
; option
!= NULL
; option
= option
->next
)
2860 if (xg_instruction_matches_option_term (insn
, option
))
2868 xg_instruction_matches_options (TInsn
*insn
, const ReqOptionList
*options
)
2870 const ReqOption
*req_options
;
2871 /* Must match each of the AND terms. */
2872 for (req_options
= options
;
2873 req_options
!= NULL
;
2874 req_options
= req_options
->next
)
2876 /* Must match one of the OR clauses. */
2877 if (!xg_instruction_matches_or_options (insn
,
2878 req_options
->or_option_terms
))
2885 /* Return the transition rule that matches or NULL if none matches. */
2888 xg_instruction_matches_rule (TInsn
*insn
, TransitionRule
*rule
)
2890 PreconditionList
*condition_l
;
2892 if (rule
->opcode
!= insn
->opcode
)
2895 for (condition_l
= rule
->conditions
;
2896 condition_l
!= NULL
;
2897 condition_l
= condition_l
->next
)
2901 Precondition
*cond
= condition_l
->precond
;
2906 /* The expression must be the constant. */
2907 gas_assert (cond
->op_num
< insn
->ntok
);
2908 exp1
= &insn
->tok
[cond
->op_num
];
2909 if (expr_is_const (exp1
))
2914 if (get_expr_const (exp1
) != cond
->op_data
)
2918 if (get_expr_const (exp1
) == cond
->op_data
)
2925 else if (expr_is_register (exp1
))
2930 if (get_expr_register (exp1
) != cond
->op_data
)
2934 if (get_expr_register (exp1
) == cond
->op_data
)
2946 gas_assert (cond
->op_num
< insn
->ntok
);
2947 gas_assert (cond
->op_data
< insn
->ntok
);
2948 exp1
= &insn
->tok
[cond
->op_num
];
2949 exp2
= &insn
->tok
[cond
->op_data
];
2954 if (!expr_is_equal (exp1
, exp2
))
2958 if (expr_is_equal (exp1
, exp2
))
2970 if (!xg_instruction_matches_options (insn
, rule
->options
))
2978 transition_rule_cmp (const TransitionRule
*a
, const TransitionRule
*b
)
2980 bfd_boolean a_greater
= FALSE
;
2981 bfd_boolean b_greater
= FALSE
;
2983 ReqOptionList
*l_a
= a
->options
;
2984 ReqOptionList
*l_b
= b
->options
;
2986 /* We only care if they both are the same except for
2987 a const16 vs. an l32r. */
2989 while (l_a
&& l_b
&& ((l_a
->next
== NULL
) == (l_b
->next
== NULL
)))
2991 ReqOrOptionList
*l_or_a
= l_a
->or_option_terms
;
2992 ReqOrOptionList
*l_or_b
= l_b
->or_option_terms
;
2993 while (l_or_a
&& l_or_b
&& ((l_a
->next
== NULL
) == (l_b
->next
== NULL
)))
2995 if (l_or_a
->is_true
!= l_or_b
->is_true
)
2997 if (strcmp (l_or_a
->option_name
, l_or_b
->option_name
) != 0)
2999 /* This is the case we care about. */
3000 if (strcmp (l_or_a
->option_name
, "IsaUseConst16") == 0
3001 && strcmp (l_or_b
->option_name
, "IsaUseL32R") == 0)
3008 else if (strcmp (l_or_a
->option_name
, "IsaUseL32R") == 0
3009 && strcmp (l_or_b
->option_name
, "IsaUseConst16") == 0)
3019 l_or_a
= l_or_a
->next
;
3020 l_or_b
= l_or_b
->next
;
3022 if (l_or_a
|| l_or_b
)
3031 /* Incomparable if the substitution was used differently in two cases. */
3032 if (a_greater
&& b_greater
)
3044 static TransitionRule
*
3045 xg_instruction_match (TInsn
*insn
)
3047 TransitionTable
*table
= xg_build_simplify_table (&transition_rule_cmp
);
3049 gas_assert (insn
->opcode
< table
->num_opcodes
);
3051 /* Walk through all of the possible transitions. */
3052 for (l
= table
->table
[insn
->opcode
]; l
!= NULL
; l
= l
->next
)
3054 TransitionRule
*rule
= l
->rule
;
3055 if (xg_instruction_matches_rule (insn
, rule
))
3062 /* Various Other Internal Functions. */
3065 is_unique_insn_expansion (TransitionRule
*r
)
3067 if (!r
->to_instr
|| r
->to_instr
->next
!= NULL
)
3069 if (r
->to_instr
->typ
!= INSTR_INSTR
)
3075 /* Check if there is exactly one relaxation for INSN that converts it to
3076 another instruction of equal or larger size. If so, and if TARG is
3077 non-null, go ahead and generate the relaxed instruction into TARG. If
3078 NARROW_ONLY is true, then only consider relaxations that widen a narrow
3079 instruction, i.e., ignore relaxations that convert to an instruction of
3080 equal size. In some contexts where this function is used, only
3081 a single widening is allowed and the NARROW_ONLY argument is used to
3082 exclude cases like ADDI being "widened" to an ADDMI, which may
3083 later be relaxed to an ADDMI/ADDI pair. */
3086 xg_is_single_relaxable_insn (TInsn
*insn
, TInsn
*targ
, bfd_boolean narrow_only
)
3088 TransitionTable
*table
= xg_build_widen_table (&transition_rule_cmp
);
3090 TransitionRule
*match
= 0;
3092 gas_assert (insn
->insn_type
== ITYPE_INSN
);
3093 gas_assert (insn
->opcode
< table
->num_opcodes
);
3095 for (l
= table
->table
[insn
->opcode
]; l
!= NULL
; l
= l
->next
)
3097 TransitionRule
*rule
= l
->rule
;
3099 if (xg_instruction_matches_rule (insn
, rule
)
3100 && is_unique_insn_expansion (rule
)
3101 && (xg_get_single_size (insn
->opcode
) + (narrow_only
? 1 : 0)
3102 <= xg_get_single_size (rule
->to_instr
->opcode
)))
3113 xg_build_to_insn (targ
, insn
, match
->to_instr
);
3118 /* Return the maximum number of bytes this opcode can expand to. */
3121 xg_get_max_insn_widen_size (xtensa_opcode opcode
)
3123 TransitionTable
*table
= xg_build_widen_table (&transition_rule_cmp
);
3125 int max_size
= xg_get_single_size (opcode
);
3127 gas_assert (opcode
< table
->num_opcodes
);
3129 for (l
= table
->table
[opcode
]; l
!= NULL
; l
= l
->next
)
3131 TransitionRule
*rule
= l
->rule
;
3132 BuildInstr
*build_list
;
3137 build_list
= rule
->to_instr
;
3138 if (is_unique_insn_expansion (rule
))
3140 gas_assert (build_list
->typ
== INSTR_INSTR
);
3141 this_size
= xg_get_max_insn_widen_size (build_list
->opcode
);
3144 for (; build_list
!= NULL
; build_list
= build_list
->next
)
3146 switch (build_list
->typ
)
3149 this_size
+= xg_get_single_size (build_list
->opcode
);
3151 case INSTR_LITERAL_DEF
:
3152 case INSTR_LABEL_DEF
:
3157 if (this_size
> max_size
)
3158 max_size
= this_size
;
3164 /* Return the maximum number of literal bytes this opcode can generate. */
3167 xg_get_max_insn_widen_literal_size (xtensa_opcode opcode
)
3169 TransitionTable
*table
= xg_build_widen_table (&transition_rule_cmp
);
3173 gas_assert (opcode
< table
->num_opcodes
);
3175 for (l
= table
->table
[opcode
]; l
!= NULL
; l
= l
->next
)
3177 TransitionRule
*rule
= l
->rule
;
3178 BuildInstr
*build_list
;
3183 build_list
= rule
->to_instr
;
3184 if (is_unique_insn_expansion (rule
))
3186 gas_assert (build_list
->typ
== INSTR_INSTR
);
3187 this_size
= xg_get_max_insn_widen_literal_size (build_list
->opcode
);
3190 for (; build_list
!= NULL
; build_list
= build_list
->next
)
3192 switch (build_list
->typ
)
3194 case INSTR_LITERAL_DEF
:
3195 /* Hard-coded 4-byte literal. */
3199 case INSTR_LABEL_DEF
:
3204 if (this_size
> max_size
)
3205 max_size
= this_size
;
3212 xg_is_relaxable_insn (TInsn
*insn
, int lateral_steps
)
3214 int steps_taken
= 0;
3215 TransitionTable
*table
= xg_build_widen_table (&transition_rule_cmp
);
3218 gas_assert (insn
->insn_type
== ITYPE_INSN
);
3219 gas_assert (insn
->opcode
< table
->num_opcodes
);
3221 for (l
= table
->table
[insn
->opcode
]; l
!= NULL
; l
= l
->next
)
3223 TransitionRule
*rule
= l
->rule
;
3225 if (xg_instruction_matches_rule (insn
, rule
))
3227 if (steps_taken
== lateral_steps
)
3237 get_special_literal_symbol (void)
3239 static symbolS
*sym
= NULL
;
3242 sym
= symbol_find_or_make ("SPECIAL_LITERAL0\001");
3248 get_special_label_symbol (void)
3250 static symbolS
*sym
= NULL
;
3253 sym
= symbol_find_or_make ("SPECIAL_LABEL0\001");
3259 xg_valid_literal_expression (const expressionS
*exp
)
3281 /* This will check to see if the value can be converted into the
3282 operand type. It will return TRUE if it does not fit. */
3285 xg_check_operand (int32 value
, xtensa_opcode opcode
, int operand
)
3287 uint32 valbuf
= value
;
3288 if (xtensa_operand_encode (xtensa_default_isa
, opcode
, operand
, &valbuf
))
3294 /* Assumes: All immeds are constants. Check that all constants fit
3295 into their immeds; return FALSE if not. */
3298 xg_immeds_fit (const TInsn
*insn
)
3300 xtensa_isa isa
= xtensa_default_isa
;
3304 gas_assert (insn
->insn_type
== ITYPE_INSN
);
3305 for (i
= 0; i
< n
; ++i
)
3307 const expressionS
*exp
= &insn
->tok
[i
];
3309 if (xtensa_operand_is_register (isa
, insn
->opcode
, i
) == 1)
3316 if (xg_check_operand (exp
->X_add_number
, insn
->opcode
, i
))
3321 /* The symbol should have a fixup associated with it. */
3330 /* This should only be called after we have an initial
3331 estimate of the addresses. */
3334 xg_symbolic_immeds_fit (const TInsn
*insn
,
3340 xtensa_isa isa
= xtensa_default_isa
;
3348 gas_assert (insn
->insn_type
== ITYPE_INSN
);
3350 for (i
= 0; i
< n
; ++i
)
3352 const expressionS
*exp
= &insn
->tok
[i
];
3354 if (xtensa_operand_is_register (isa
, insn
->opcode
, i
) == 1)
3361 if (xg_check_operand (exp
->X_add_number
, insn
->opcode
, i
))
3367 /* Check for the worst case. */
3368 if (xg_check_operand (0xffff, insn
->opcode
, i
))
3373 /* We only allow symbols for PC-relative references.
3374 If pc_frag == 0, then we don't have frag locations yet. */
3376 || xtensa_operand_is_PCrelative (isa
, insn
->opcode
, i
) == 0)
3379 /* If it is a weak symbol or a symbol in a different section,
3380 it cannot be known to fit at assembly time. */
3381 if (S_IS_WEAK (exp
->X_add_symbol
)
3382 || S_GET_SEGMENT (exp
->X_add_symbol
) != pc_seg
)
3384 /* For a direct call with --no-longcalls, be optimistic and
3385 assume it will be in range. If the symbol is weak and
3386 undefined, it may remain undefined at link-time, in which
3387 case it will have a zero value and almost certainly be out
3388 of range for a direct call; thus, relax for undefined weak
3389 symbols even if longcalls is not enabled. */
3390 if (is_direct_call_opcode (insn
->opcode
)
3391 && ! pc_frag
->tc_frag_data
.use_longcalls
3392 && (! S_IS_WEAK (exp
->X_add_symbol
)
3393 || S_IS_DEFINED (exp
->X_add_symbol
)))
3399 symbolP
= exp
->X_add_symbol
;
3400 sym_frag
= symbol_get_frag (symbolP
);
3401 target
= S_GET_VALUE (symbolP
) + exp
->X_add_number
;
3402 pc
= pc_frag
->fr_address
+ pc_offset
;
3404 /* If frag has yet to be reached on this pass, assume it
3405 will move by STRETCH just as we did. If this is not so,
3406 it will be because some frag between grows, and that will
3407 force another pass. Beware zero-length frags. There
3408 should be a faster way to do this. */
3411 && sym_frag
->relax_marker
!= pc_frag
->relax_marker
3412 && S_GET_SEGMENT (symbolP
) == pc_seg
)
3417 new_offset
= target
;
3418 xtensa_operand_do_reloc (isa
, insn
->opcode
, i
, &new_offset
, pc
);
3419 if (xg_check_operand (new_offset
, insn
->opcode
, i
))
3424 /* The symbol should have a fixup associated with it. */
3433 /* Return TRUE on success. */
3436 xg_build_to_insn (TInsn
*targ
, TInsn
*insn
, BuildInstr
*bi
)
3442 targ
->debug_line
= insn
->debug_line
;
3443 targ
->loc_directive_seen
= insn
->loc_directive_seen
;
3448 targ
->opcode
= bi
->opcode
;
3449 targ
->insn_type
= ITYPE_INSN
;
3450 targ
->is_specific_opcode
= FALSE
;
3452 for (; op
!= NULL
; op
= op
->next
)
3454 int op_num
= op
->op_num
;
3455 int op_data
= op
->op_data
;
3457 gas_assert (op
->op_num
< MAX_INSN_ARGS
);
3459 if (targ
->ntok
<= op_num
)
3460 targ
->ntok
= op_num
+ 1;
3465 set_expr_const (&targ
->tok
[op_num
], op_data
);
3468 gas_assert (op_data
< insn
->ntok
);
3469 copy_expr (&targ
->tok
[op_num
], &insn
->tok
[op_data
]);
3472 if (insn
->extra_arg
.X_op
!= O_register
)
3474 copy_expr (&targ
->tok
[op_num
], &insn
->extra_arg
);
3477 sym
= get_special_literal_symbol ();
3478 set_expr_symbol_offset (&targ
->tok
[op_num
], sym
, 0);
3479 if (insn
->tok
[op_data
].X_op
== O_tlsfunc
3480 || insn
->tok
[op_data
].X_op
== O_tlsarg
)
3481 copy_expr (&targ
->extra_arg
, &insn
->tok
[op_data
]);
3484 sym
= get_special_label_symbol ();
3485 set_expr_symbol_offset (&targ
->tok
[op_num
], sym
, 0);
3487 case OP_OPERAND_HI16U
:
3488 case OP_OPERAND_LOW16U
:
3489 gas_assert (op_data
< insn
->ntok
);
3490 if (expr_is_const (&insn
->tok
[op_data
]))
3493 copy_expr (&targ
->tok
[op_num
], &insn
->tok
[op_data
]);
3494 val
= xg_apply_userdef_op_fn (op
->typ
,
3497 targ
->tok
[op_num
].X_add_number
= val
;
3501 /* For const16 we can create relocations for these. */
3502 if (targ
->opcode
== XTENSA_UNDEFINED
3503 || (targ
->opcode
!= xtensa_const16_opcode
))
3505 gas_assert (op_data
< insn
->ntok
);
3506 /* Need to build a O_lo16 or O_hi16. */
3507 copy_expr (&targ
->tok
[op_num
], &insn
->tok
[op_data
]);
3508 if (targ
->tok
[op_num
].X_op
== O_symbol
)
3510 if (op
->typ
== OP_OPERAND_HI16U
)
3511 targ
->tok
[op_num
].X_op
= O_hi16
;
3512 else if (op
->typ
== OP_OPERAND_LOW16U
)
3513 targ
->tok
[op_num
].X_op
= O_lo16
;
3520 /* currently handles:
3523 OP_OPERAND_F32MINUS */
3524 if (xg_has_userdef_op_fn (op
->typ
))
3526 gas_assert (op_data
< insn
->ntok
);
3527 if (expr_is_const (&insn
->tok
[op_data
]))
3530 copy_expr (&targ
->tok
[op_num
], &insn
->tok
[op_data
]);
3531 val
= xg_apply_userdef_op_fn (op
->typ
,
3534 targ
->tok
[op_num
].X_add_number
= val
;
3537 return FALSE
; /* We cannot use a relocation for this. */
3546 case INSTR_LITERAL_DEF
:
3548 targ
->opcode
= XTENSA_UNDEFINED
;
3549 targ
->insn_type
= ITYPE_LITERAL
;
3550 targ
->is_specific_opcode
= FALSE
;
3551 for (; op
!= NULL
; op
= op
->next
)
3553 int op_num
= op
->op_num
;
3554 int op_data
= op
->op_data
;
3555 gas_assert (op
->op_num
< MAX_INSN_ARGS
);
3557 if (targ
->ntok
<= op_num
)
3558 targ
->ntok
= op_num
+ 1;
3563 gas_assert (op_data
< insn
->ntok
);
3564 /* We can only pass resolvable literals through. */
3565 if (!xg_valid_literal_expression (&insn
->tok
[op_data
]))
3567 copy_expr (&targ
->tok
[op_num
], &insn
->tok
[op_data
]);
3579 case INSTR_LABEL_DEF
:
3581 targ
->opcode
= XTENSA_UNDEFINED
;
3582 targ
->insn_type
= ITYPE_LABEL
;
3583 targ
->is_specific_opcode
= FALSE
;
3584 /* Literal with no ops is a label? */
3585 gas_assert (op
== NULL
);
3596 /* Return TRUE on success. */
3599 xg_build_to_stack (IStack
*istack
, TInsn
*insn
, BuildInstr
*bi
)
3601 for (; bi
!= NULL
; bi
= bi
->next
)
3603 TInsn
*next_insn
= istack_push_space (istack
);
3605 if (!xg_build_to_insn (next_insn
, insn
, bi
))
3612 /* Return TRUE on valid expansion. */
3615 xg_expand_to_stack (IStack
*istack
, TInsn
*insn
, int lateral_steps
)
3617 int stack_size
= istack
->ninsn
;
3618 int steps_taken
= 0;
3619 TransitionTable
*table
= xg_build_widen_table (&transition_rule_cmp
);
3622 gas_assert (insn
->insn_type
== ITYPE_INSN
);
3623 gas_assert (insn
->opcode
< table
->num_opcodes
);
3625 for (l
= table
->table
[insn
->opcode
]; l
!= NULL
; l
= l
->next
)
3627 TransitionRule
*rule
= l
->rule
;
3629 if (xg_instruction_matches_rule (insn
, rule
))
3631 if (lateral_steps
== steps_taken
)
3635 /* This is it. Expand the rule to the stack. */
3636 if (!xg_build_to_stack (istack
, insn
, rule
->to_instr
))
3639 /* Check to see if it fits. */
3640 for (i
= stack_size
; i
< istack
->ninsn
; i
++)
3642 TInsn
*tinsn
= &istack
->insn
[i
];
3644 if (tinsn
->insn_type
== ITYPE_INSN
3645 && !tinsn_has_symbolic_operands (tinsn
)
3646 && !xg_immeds_fit (tinsn
))
3648 istack
->ninsn
= stack_size
;
3661 /* Relax the assembly instruction at least "min_steps".
3662 Return the number of steps taken.
3664 For relaxation to correctly terminate, every relaxation chain must
3665 terminate in one of two ways:
3667 1. If the chain from one instruction to the next consists entirely of
3668 single instructions, then the chain *must* handle all possible
3669 immediates without failing. It must not ever fail because an
3670 immediate is out of range. The MOVI.N -> MOVI -> L32R relaxation
3671 chain is one example. L32R loads 32 bits, and there cannot be an
3672 immediate larger than 32 bits, so it satisfies this condition.
3673 Single instruction relaxation chains are as defined by
3674 xg_is_single_relaxable_instruction.
3676 2. Otherwise, the chain must end in a multi-instruction expansion: e.g.,
3677 BNEZ.N -> BNEZ -> BNEZ.W15 -> BENZ.N/J
3679 Strictly speaking, in most cases you can violate condition 1 and be OK
3680 -- in particular when the last two instructions have the same single
3681 size. But nevertheless, you should guarantee the above two conditions.
3683 We could fix this so that single-instruction expansions correctly
3684 terminate when they can't handle the range, but the error messages are
3685 worse, and it actually turns out that in every case but one (18-bit wide
3686 branches), you need a multi-instruction expansion to get the full range
3687 anyway. And because 18-bit branches are handled identically to 15-bit
3688 branches, there isn't any point in changing it. */
3691 xg_assembly_relax (IStack
*istack
,
3694 fragS
*pc_frag
, /* if pc_frag == 0, not pc-relative */
3695 offsetT pc_offset
, /* offset in fragment */
3696 int min_steps
, /* minimum conversion steps */
3697 long stretch
) /* number of bytes stretched so far */
3699 int steps_taken
= 0;
3701 /* Some of its immeds don't fit. Try to build a relaxed version.
3702 This may go through a couple of stages of single instruction
3703 transformations before we get there. */
3705 TInsn single_target
;
3707 int lateral_steps
= 0;
3708 int istack_size
= istack
->ninsn
;
3710 if (xg_symbolic_immeds_fit (insn
, pc_seg
, pc_frag
, pc_offset
, stretch
)
3711 && steps_taken
>= min_steps
)
3713 istack_push (istack
, insn
);
3716 current_insn
= *insn
;
3718 /* Walk through all of the single instruction expansions. */
3719 while (xg_is_single_relaxable_insn (¤t_insn
, &single_target
, FALSE
))
3722 if (xg_symbolic_immeds_fit (&single_target
, pc_seg
, pc_frag
, pc_offset
,
3725 if (steps_taken
>= min_steps
)
3727 istack_push (istack
, &single_target
);
3731 current_insn
= single_target
;
3734 /* Now check for a multi-instruction expansion. */
3735 while (xg_is_relaxable_insn (¤t_insn
, lateral_steps
))
3737 if (xg_symbolic_immeds_fit (¤t_insn
, pc_seg
, pc_frag
, pc_offset
,
3740 if (steps_taken
>= min_steps
)
3742 istack_push (istack
, ¤t_insn
);
3747 if (xg_expand_to_stack (istack
, ¤t_insn
, lateral_steps
))
3749 if (steps_taken
>= min_steps
)
3753 istack
->ninsn
= istack_size
;
3756 /* It's not going to work -- use the original. */
3757 istack_push (istack
, insn
);
3763 xg_finish_frag (char *last_insn
,
3764 enum xtensa_relax_statesE frag_state
,
3765 enum xtensa_relax_statesE slot0_state
,
3767 bfd_boolean is_insn
)
3769 /* Finish off this fragment so that it has at LEAST the desired
3770 max_growth. If it doesn't fit in this fragment, close this one
3771 and start a new one. In either case, return a pointer to the
3772 beginning of the growth area. */
3776 frag_grow (max_growth
);
3777 old_frag
= frag_now
;
3779 frag_now
->fr_opcode
= last_insn
;
3781 frag_now
->tc_frag_data
.is_insn
= TRUE
;
3783 frag_var (rs_machine_dependent
, max_growth
, max_growth
,
3784 frag_state
, frag_now
->fr_symbol
, frag_now
->fr_offset
, last_insn
);
3786 old_frag
->tc_frag_data
.slot_subtypes
[0] = slot0_state
;
3787 xtensa_set_frag_assembly_state (frag_now
);
3789 /* Just to make sure that we did not split it up. */
3790 gas_assert (old_frag
->fr_next
== frag_now
);
3794 /* Return TRUE if the target frag is one of the next non-empty frags. */
3797 is_next_frag_target (const fragS
*fragP
, const fragS
*target
)
3802 for (; fragP
; fragP
= fragP
->fr_next
)
3804 if (fragP
== target
)
3806 if (fragP
->fr_fix
!= 0)
3808 if (fragP
->fr_type
== rs_fill
&& fragP
->fr_offset
!= 0)
3810 if ((fragP
->fr_type
== rs_align
|| fragP
->fr_type
== rs_align_code
)
3811 && ((fragP
->fr_address
% (1 << fragP
->fr_offset
)) != 0))
3813 if (fragP
->fr_type
== rs_space
)
3821 is_branch_jmp_to_next (TInsn
*insn
, fragS
*fragP
)
3823 xtensa_isa isa
= xtensa_default_isa
;
3825 int num_ops
= xtensa_opcode_num_operands (isa
, insn
->opcode
);
3830 if (xtensa_opcode_is_branch (isa
, insn
->opcode
) != 1
3831 && xtensa_opcode_is_jump (isa
, insn
->opcode
) != 1)
3834 for (i
= 0; i
< num_ops
; i
++)
3836 if (xtensa_operand_is_PCrelative (isa
, insn
->opcode
, i
) == 1)
3842 if (target_op
== -1)
3845 if (insn
->ntok
<= target_op
)
3848 if (insn
->tok
[target_op
].X_op
!= O_symbol
)
3851 sym
= insn
->tok
[target_op
].X_add_symbol
;
3855 if (insn
->tok
[target_op
].X_add_number
!= 0)
3858 target_frag
= symbol_get_frag (sym
);
3859 if (target_frag
== NULL
)
3862 if (is_next_frag_target (fragP
->fr_next
, target_frag
)
3863 && S_GET_VALUE (sym
) == target_frag
->fr_address
)
3871 xg_add_branch_and_loop_targets (TInsn
*insn
)
3873 xtensa_isa isa
= xtensa_default_isa
;
3874 int num_ops
= xtensa_opcode_num_operands (isa
, insn
->opcode
);
3876 if (xtensa_opcode_is_loop (isa
, insn
->opcode
) == 1)
3879 if (xtensa_operand_is_PCrelative (isa
, insn
->opcode
, i
) == 1
3880 && insn
->tok
[i
].X_op
== O_symbol
)
3881 symbol_get_tc (insn
->tok
[i
].X_add_symbol
)->is_loop_target
= TRUE
;
3885 if (xtensa_opcode_is_branch (isa
, insn
->opcode
) == 1
3886 || xtensa_opcode_is_loop (isa
, insn
->opcode
) == 1)
3890 for (i
= 0; i
< insn
->ntok
&& i
< num_ops
; i
++)
3892 if (xtensa_operand_is_PCrelative (isa
, insn
->opcode
, i
) == 1
3893 && insn
->tok
[i
].X_op
== O_symbol
)
3895 symbolS
*sym
= insn
->tok
[i
].X_add_symbol
;
3896 symbol_get_tc (sym
)->is_branch_target
= TRUE
;
3897 if (S_IS_DEFINED (sym
))
3898 symbol_get_frag (sym
)->tc_frag_data
.is_branch_target
= TRUE
;
3905 /* Return FALSE if no error. */
3908 xg_build_token_insn (BuildInstr
*instr_spec
, TInsn
*old_insn
, TInsn
*new_insn
)
3913 switch (instr_spec
->typ
)
3916 new_insn
->insn_type
= ITYPE_INSN
;
3917 new_insn
->opcode
= instr_spec
->opcode
;
3919 case INSTR_LITERAL_DEF
:
3920 new_insn
->insn_type
= ITYPE_LITERAL
;
3921 new_insn
->opcode
= XTENSA_UNDEFINED
;
3923 case INSTR_LABEL_DEF
:
3926 new_insn
->is_specific_opcode
= FALSE
;
3927 new_insn
->debug_line
= old_insn
->debug_line
;
3928 new_insn
->loc_directive_seen
= old_insn
->loc_directive_seen
;
3930 for (b_op
= instr_spec
->ops
; b_op
!= NULL
; b_op
= b_op
->next
)
3933 const expressionS
*src_exp
;
3939 /* The expression must be the constant. */
3940 gas_assert (b_op
->op_num
< MAX_INSN_ARGS
);
3941 exp
= &new_insn
->tok
[b_op
->op_num
];
3942 set_expr_const (exp
, b_op
->op_data
);
3946 gas_assert (b_op
->op_num
< MAX_INSN_ARGS
);
3947 gas_assert (b_op
->op_data
< (unsigned) old_insn
->ntok
);
3948 src_exp
= &old_insn
->tok
[b_op
->op_data
];
3949 exp
= &new_insn
->tok
[b_op
->op_num
];
3950 copy_expr (exp
, src_exp
);
3955 as_bad (_("can't handle generation of literal/labels yet"));
3959 as_bad (_("can't handle undefined OP TYPE"));
3964 new_insn
->ntok
= num_ops
;
3969 /* Return TRUE if it was simplified. */
3972 xg_simplify_insn (TInsn
*old_insn
, TInsn
*new_insn
)
3974 TransitionRule
*rule
;
3975 BuildInstr
*insn_spec
;
3977 if (old_insn
->is_specific_opcode
|| !density_supported
)
3980 rule
= xg_instruction_match (old_insn
);
3984 insn_spec
= rule
->to_instr
;
3985 /* There should only be one. */
3986 gas_assert (insn_spec
!= NULL
);
3987 gas_assert (insn_spec
->next
== NULL
);
3988 if (insn_spec
->next
!= NULL
)
3991 xg_build_token_insn (insn_spec
, old_insn
, new_insn
);
3997 /* xg_expand_assembly_insn: (1) Simplify the instruction, i.e., l32i ->
3998 l32i.n. (2) Check the number of operands. (3) Place the instruction
3999 tokens into the stack or relax it and place multiple
4000 instructions/literals onto the stack. Return FALSE if no error. */
4003 xg_expand_assembly_insn (IStack
*istack
, TInsn
*orig_insn
)
4007 bfd_boolean do_expand
;
4009 tinsn_init (&new_insn
);
4011 /* Narrow it if we can. xg_simplify_insn now does all the
4012 appropriate checking (e.g., for the density option). */
4013 if (xg_simplify_insn (orig_insn
, &new_insn
))
4014 orig_insn
= &new_insn
;
4016 noperands
= xtensa_opcode_num_operands (xtensa_default_isa
,
4018 if (orig_insn
->ntok
< noperands
)
4020 as_bad (ngettext ("found %d operand for '%s': Expected %d",
4021 "found %d operands for '%s': Expected %d",
4024 xtensa_opcode_name (xtensa_default_isa
, orig_insn
->opcode
),
4028 if (orig_insn
->ntok
> noperands
)
4029 as_warn (ngettext ("found %d operand for '%s': Expected %d",
4030 "found %d operands for '%s': Expected %d",
4033 xtensa_opcode_name (xtensa_default_isa
, orig_insn
->opcode
),
4036 /* If there are not enough operands, we will assert above. If there
4037 are too many, just cut out the extras here. */
4038 orig_insn
->ntok
= noperands
;
4040 if (tinsn_has_invalid_symbolic_operands (orig_insn
))
4043 /* Special case for extui opcode which has constraints not handled
4044 by the ordinary operand encoding checks. The number of operands
4045 and related syntax issues have already been checked. */
4046 if (orig_insn
->opcode
== xtensa_extui_opcode
)
4048 int shiftimm
= orig_insn
->tok
[2].X_add_number
;
4049 int maskimm
= orig_insn
->tok
[3].X_add_number
;
4050 if (shiftimm
+ maskimm
> 32)
4052 as_bad (_("immediate operands sum to greater than 32"));
4057 /* If the instruction will definitely need to be relaxed, it is better
4058 to expand it now for better scheduling. Decide whether to expand
4060 do_expand
= (!orig_insn
->is_specific_opcode
&& use_transform ());
4062 /* Calls should be expanded to longcalls only in the backend relaxation
4063 so that the assembly scheduler will keep the L32R/CALLX instructions
4065 if (is_direct_call_opcode (orig_insn
->opcode
))
4068 if (tinsn_has_symbolic_operands (orig_insn
))
4070 /* The values of symbolic operands are not known yet, so only expand
4071 now if an operand is "complex" (e.g., difference of symbols) and
4072 will have to be stored as a literal regardless of the value. */
4073 if (!tinsn_has_complex_operands (orig_insn
))
4076 else if (xg_immeds_fit (orig_insn
))
4080 xg_assembly_relax (istack
, orig_insn
, 0, 0, 0, 0, 0);
4082 istack_push (istack
, orig_insn
);
4088 /* Return TRUE if the section flags are marked linkonce
4089 or the name is .gnu.linkonce.*. */
4091 static int linkonce_len
= sizeof (".gnu.linkonce.") - 1;
4094 get_is_linkonce_section (bfd
*abfd ATTRIBUTE_UNUSED
, segT sec
)
4096 flagword flags
, link_once_flags
;
4098 flags
= bfd_get_section_flags (abfd
, sec
);
4099 link_once_flags
= (flags
& SEC_LINK_ONCE
);
4101 /* Flags might not be set yet. */
4102 if (!link_once_flags
4103 && strncmp (segment_name (sec
), ".gnu.linkonce.", linkonce_len
) == 0)
4104 link_once_flags
= SEC_LINK_ONCE
;
4106 return (link_once_flags
!= 0);
4111 xtensa_add_literal_sym (symbolS
*sym
)
4115 l
= XNEW (sym_list
);
4117 l
->next
= literal_syms
;
4123 xtensa_create_literal_symbol (segT sec
, fragS
*frag
)
4125 static int lit_num
= 0;
4126 static char name
[256];
4129 sprintf (name
, ".L_lit_sym%d", lit_num
);
4131 /* Create a local symbol. If it is in a linkonce section, we have to
4132 be careful to make sure that if it is used in a relocation that the
4133 symbol will be in the output file. */
4134 if (get_is_linkonce_section (stdoutput
, sec
))
4136 symbolP
= symbol_new (name
, sec
, 0, frag
);
4137 S_CLEAR_EXTERNAL (symbolP
);
4138 /* symbolP->local = 1; */
4141 symbolP
= symbol_new (name
, sec
, 0, frag
);
4143 xtensa_add_literal_sym (symbolP
);
4150 /* Currently all literals that are generated here are 32-bit L32R targets. */
4153 xg_assemble_literal (/* const */ TInsn
*insn
)
4156 symbolS
*lit_sym
= NULL
;
4157 bfd_reloc_code_real_type reloc
;
4158 bfd_boolean pcrel
= FALSE
;
4161 /* size = 4 for L32R. It could easily be larger when we move to
4162 larger constants. Add a parameter later. */
4163 offsetT litsize
= 4;
4164 offsetT litalign
= 2; /* 2^2 = 4 */
4165 expressionS saved_loc
;
4166 expressionS
* emit_val
;
4168 set_expr_symbol_offset (&saved_loc
, frag_now
->fr_symbol
, frag_now_fix ());
4170 gas_assert (insn
->insn_type
== ITYPE_LITERAL
);
4171 gas_assert (insn
->ntok
== 1); /* must be only one token here */
4173 xtensa_switch_to_literal_fragment (&state
);
4175 emit_val
= &insn
->tok
[0];
4176 if (emit_val
->X_op
== O_big
)
4178 int size
= emit_val
->X_add_number
* CHARS_PER_LITTLENUM
;
4181 /* This happens when someone writes a "movi a2, big_number". */
4182 as_bad_where (frag_now
->fr_file
, frag_now
->fr_line
,
4183 _("invalid immediate"));
4184 xtensa_restore_emit_state (&state
);
4189 /* Force a 4-byte align here. Note that this opens a new frag, so all
4190 literals done with this function have a frag to themselves. That's
4191 important for the way text section literals work. */
4192 frag_align (litalign
, 0, 0);
4193 record_alignment (now_seg
, litalign
);
4195 switch (emit_val
->X_op
)
4205 p
= frag_more (litsize
);
4206 xtensa_set_frag_assembly_state (frag_now
);
4207 reloc
= map_operator_to_reloc (emit_val
->X_op
, TRUE
);
4208 if (emit_val
->X_add_symbol
)
4209 emit_val
->X_op
= O_symbol
;
4211 emit_val
->X_op
= O_constant
;
4212 fix_new_exp (frag_now
, p
- frag_now
->fr_literal
,
4213 litsize
, emit_val
, pcrel
, reloc
);
4217 emit_expr (emit_val
, litsize
);
4221 gas_assert (frag_now
->tc_frag_data
.literal_frag
== NULL
);
4222 frag_now
->tc_frag_data
.literal_frag
= get_literal_pool_location (now_seg
);
4223 frag_now
->fr_symbol
= xtensa_create_literal_symbol (now_seg
, frag_now
);
4224 lit_sym
= frag_now
->fr_symbol
;
4227 xtensa_restore_emit_state (&state
);
4233 xg_assemble_literal_space (/* const */ int size
, int slot
)
4236 /* We might have to do something about this alignment. It only
4237 takes effect if something is placed here. */
4238 offsetT litalign
= 2; /* 2^2 = 4 */
4239 fragS
*lit_saved_frag
;
4241 gas_assert (size
% 4 == 0);
4243 xtensa_switch_to_literal_fragment (&state
);
4245 /* Force a 4-byte align here. */
4246 frag_align (litalign
, 0, 0);
4247 record_alignment (now_seg
, litalign
);
4251 lit_saved_frag
= frag_now
;
4252 frag_now
->tc_frag_data
.literal_frag
= get_literal_pool_location (now_seg
);
4253 frag_now
->fr_symbol
= xtensa_create_literal_symbol (now_seg
, frag_now
);
4254 xg_finish_frag (0, RELAX_LITERAL
, 0, size
, FALSE
);
4257 xtensa_restore_emit_state (&state
);
4258 frag_now
->tc_frag_data
.literal_frags
[slot
] = lit_saved_frag
;
4262 /* Put in a fixup record based on the opcode.
4263 Return TRUE on success. */
4266 xg_add_opcode_fix (TInsn
*tinsn
,
4274 xtensa_opcode opcode
= tinsn
->opcode
;
4275 bfd_reloc_code_real_type reloc
;
4276 reloc_howto_type
*howto
;
4280 reloc
= BFD_RELOC_NONE
;
4282 /* First try the special cases for "alternate" relocs. */
4283 if (opcode
== xtensa_l32r_opcode
)
4285 if (fragP
->tc_frag_data
.use_absolute_literals
)
4286 reloc
= encode_alt_reloc (slot
);
4288 else if (opcode
== xtensa_const16_opcode
)
4290 if (exp
->X_op
== O_lo16
)
4292 reloc
= encode_reloc (slot
);
4293 exp
->X_op
= O_symbol
;
4295 else if (exp
->X_op
== O_hi16
)
4297 reloc
= encode_alt_reloc (slot
);
4298 exp
->X_op
= O_symbol
;
4302 if (opnum
!= get_relaxable_immed (opcode
))
4304 as_bad (_("invalid relocation for operand %i of '%s'"),
4305 opnum
+ 1, xtensa_opcode_name (xtensa_default_isa
, opcode
));
4309 /* Handle erroneous "@h" and "@l" expressions here before they propagate
4310 into the symbol table where the generic portions of the assembler
4311 won't know what to do with them. */
4312 if (exp
->X_op
== O_lo16
|| exp
->X_op
== O_hi16
)
4314 as_bad (_("invalid expression for operand %i of '%s'"),
4315 opnum
+ 1, xtensa_opcode_name (xtensa_default_isa
, opcode
));
4319 /* Next try the generic relocs. */
4320 if (reloc
== BFD_RELOC_NONE
)
4321 reloc
= encode_reloc (slot
);
4322 if (reloc
== BFD_RELOC_NONE
)
4324 as_bad (_("invalid relocation in instruction slot %i"), slot
);
4328 howto
= bfd_reloc_type_lookup (stdoutput
, reloc
);
4331 as_bad (_("undefined symbol for opcode \"%s\""),
4332 xtensa_opcode_name (xtensa_default_isa
, opcode
));
4336 fmt_length
= xtensa_format_length (xtensa_default_isa
, fmt
);
4337 the_fix
= fix_new_exp (fragP
, offset
, fmt_length
, exp
,
4338 howto
->pc_relative
, reloc
);
4339 the_fix
->fx_no_overflow
= 1;
4340 the_fix
->tc_fix_data
.X_add_symbol
= exp
->X_add_symbol
;
4341 the_fix
->tc_fix_data
.X_add_number
= exp
->X_add_number
;
4342 the_fix
->tc_fix_data
.slot
= slot
;
4349 xg_emit_insn_to_buf (TInsn
*tinsn
,
4353 bfd_boolean build_fix
)
4355 static xtensa_insnbuf insnbuf
= NULL
;
4356 bfd_boolean has_symbolic_immed
= FALSE
;
4357 bfd_boolean ok
= TRUE
;
4360 insnbuf
= xtensa_insnbuf_alloc (xtensa_default_isa
);
4362 has_symbolic_immed
= tinsn_to_insnbuf (tinsn
, insnbuf
);
4363 if (has_symbolic_immed
&& build_fix
)
4366 xtensa_format fmt
= xg_get_single_format (tinsn
->opcode
);
4367 int slot
= xg_get_single_slot (tinsn
->opcode
);
4368 int opnum
= get_relaxable_immed (tinsn
->opcode
);
4369 expressionS
*exp
= &tinsn
->tok
[opnum
];
4371 if (!xg_add_opcode_fix (tinsn
, opnum
, fmt
, slot
, exp
, fragP
, offset
))
4374 fragP
->tc_frag_data
.is_insn
= TRUE
;
4375 xtensa_insnbuf_to_chars (xtensa_default_isa
, insnbuf
,
4376 (unsigned char *) buf
, 0);
4382 xg_resolve_literals (TInsn
*insn
, symbolS
*lit_sym
)
4384 symbolS
*sym
= get_special_literal_symbol ();
4388 gas_assert (insn
->insn_type
== ITYPE_INSN
);
4389 for (i
= 0; i
< insn
->ntok
; i
++)
4390 if (insn
->tok
[i
].X_add_symbol
== sym
)
4391 insn
->tok
[i
].X_add_symbol
= lit_sym
;
4397 xg_resolve_labels (TInsn
*insn
, symbolS
*label_sym
)
4399 symbolS
*sym
= get_special_label_symbol ();
4401 for (i
= 0; i
< insn
->ntok
; i
++)
4402 if (insn
->tok
[i
].X_add_symbol
== sym
)
4403 insn
->tok
[i
].X_add_symbol
= label_sym
;
4408 /* Return TRUE if the instruction can write to the specified
4409 integer register. */
4412 is_register_writer (const TInsn
*insn
, const char *regset
, int regnum
)
4416 xtensa_isa isa
= xtensa_default_isa
;
4418 num_ops
= xtensa_opcode_num_operands (isa
, insn
->opcode
);
4420 for (i
= 0; i
< num_ops
; i
++)
4423 inout
= xtensa_operand_inout (isa
, insn
->opcode
, i
);
4424 if ((inout
== 'o' || inout
== 'm')
4425 && xtensa_operand_is_register (isa
, insn
->opcode
, i
) == 1)
4427 xtensa_regfile opnd_rf
=
4428 xtensa_operand_regfile (isa
, insn
->opcode
, i
);
4429 if (!strcmp (xtensa_regfile_shortname (isa
, opnd_rf
), regset
))
4431 if ((insn
->tok
[i
].X_op
== O_register
)
4432 && (insn
->tok
[i
].X_add_number
== regnum
))
4442 is_bad_loopend_opcode (const TInsn
*tinsn
)
4444 xtensa_opcode opcode
= tinsn
->opcode
;
4446 if (opcode
== XTENSA_UNDEFINED
)
4449 if (opcode
== xtensa_call0_opcode
4450 || opcode
== xtensa_callx0_opcode
4451 || opcode
== xtensa_call4_opcode
4452 || opcode
== xtensa_callx4_opcode
4453 || opcode
== xtensa_call8_opcode
4454 || opcode
== xtensa_callx8_opcode
4455 || opcode
== xtensa_call12_opcode
4456 || opcode
== xtensa_callx12_opcode
4457 || opcode
== xtensa_isync_opcode
4458 || opcode
== xtensa_ret_opcode
4459 || opcode
== xtensa_ret_n_opcode
4460 || opcode
== xtensa_retw_opcode
4461 || opcode
== xtensa_retw_n_opcode
4462 || opcode
== xtensa_waiti_opcode
4463 || opcode
== xtensa_rsr_lcount_opcode
)
4470 /* Labels that begin with ".Ln" or ".LM" are unaligned.
4471 This allows the debugger to add unaligned labels.
4472 Also, the assembler generates stabs labels that need
4473 not be aligned: FAKE_LABEL_NAME . {"F", "L", "endfunc"}. */
4476 is_unaligned_label (symbolS
*sym
)
4478 const char *name
= S_GET_NAME (sym
);
4479 static size_t fake_size
= 0;
4483 && name
[1] == 'L' && (name
[2] == 'n' || name
[2] == 'M'))
4486 /* FAKE_LABEL_NAME followed by "F", "L" or "endfunc" */
4488 fake_size
= strlen (FAKE_LABEL_NAME
);
4491 && strncmp (FAKE_LABEL_NAME
, name
, fake_size
) == 0
4492 && (name
[fake_size
] == 'F'
4493 || name
[fake_size
] == 'L'
4494 || (name
[fake_size
] == 'e'
4495 && strncmp ("endfunc", name
+fake_size
, 7) == 0)))
4503 next_non_empty_frag (const fragS
*fragP
)
4505 fragS
*next_fragP
= fragP
->fr_next
;
4507 /* Sometimes an empty will end up here due storage allocation issues.
4508 So we have to skip until we find something legit. */
4509 while (next_fragP
&& next_fragP
->fr_fix
== 0)
4510 next_fragP
= next_fragP
->fr_next
;
4512 if (next_fragP
== NULL
|| next_fragP
->fr_fix
== 0)
4520 next_frag_opcode_is_loop (const fragS
*fragP
, xtensa_opcode
*opcode
)
4522 xtensa_opcode out_opcode
;
4523 const fragS
*next_fragP
= next_non_empty_frag (fragP
);
4525 if (next_fragP
== NULL
)
4528 out_opcode
= get_opcode_from_buf (next_fragP
->fr_literal
, 0);
4529 if (xtensa_opcode_is_loop (xtensa_default_isa
, out_opcode
) == 1)
4531 *opcode
= out_opcode
;
4539 frag_format_size (const fragS
*fragP
)
4541 static xtensa_insnbuf insnbuf
= NULL
;
4542 xtensa_isa isa
= xtensa_default_isa
;
4547 insnbuf
= xtensa_insnbuf_alloc (isa
);
4550 return XTENSA_UNDEFINED
;
4552 xtensa_insnbuf_from_chars (isa
, insnbuf
,
4553 (unsigned char *) fragP
->fr_literal
, 0);
4555 fmt
= xtensa_format_decode (isa
, insnbuf
);
4556 if (fmt
== XTENSA_UNDEFINED
)
4557 return XTENSA_UNDEFINED
;
4558 fmt_size
= xtensa_format_length (isa
, fmt
);
4560 /* If the next format won't be changing due to relaxation, just
4561 return the length of the first format. */
4562 if (fragP
->fr_opcode
!= fragP
->fr_literal
)
4565 /* If during relaxation we have to pull an instruction out of a
4566 multi-slot instruction, we will return the more conservative
4567 number. This works because alignment on bigger instructions
4568 is more restrictive than alignment on smaller instructions.
4569 This is more conservative than we would like, but it happens
4572 if (xtensa_format_num_slots (xtensa_default_isa
, fmt
) > 1)
4575 /* If we aren't doing one of our own relaxations or it isn't
4576 slot-based, then the insn size won't change. */
4577 if (fragP
->fr_type
!= rs_machine_dependent
)
4579 if (fragP
->fr_subtype
!= RELAX_SLOTS
)
4582 /* If an instruction is about to grow, return the longer size. */
4583 if (fragP
->tc_frag_data
.slot_subtypes
[0] == RELAX_IMMED_STEP1
4584 || fragP
->tc_frag_data
.slot_subtypes
[0] == RELAX_IMMED_STEP2
4585 || fragP
->tc_frag_data
.slot_subtypes
[0] == RELAX_IMMED_STEP3
)
4587 /* For most frags at RELAX_IMMED_STEPX, with X > 0, the first
4588 instruction in the relaxed version is of length 3. (The case
4589 where we have to pull the instruction out of a FLIX bundle
4590 is handled conservatively above.) However, frags with opcodes
4591 that are expanding to wide branches end up having formats that
4592 are not determinable by the RELAX_IMMED_STEPX enumeration, and
4593 we can't tell directly what format the relaxer picked. This
4594 is a wart in the design of the relaxer that should someday be
4595 fixed, but would require major changes, or at least should
4596 be accompanied by major changes to make use of that data.
4598 In any event, we can tell that we are expanding from a single-slot
4599 format to a wider one with the logic below. */
4602 int relaxed_size
= fmt_size
+ fragP
->tc_frag_data
.text_expansion
[0];
4604 for (i
= 0; i
< xtensa_isa_num_formats (isa
); i
++)
4606 if (relaxed_size
== xtensa_format_length (isa
, i
))
4607 return relaxed_size
;
4613 if (fragP
->tc_frag_data
.slot_subtypes
[0] == RELAX_NARROW
)
4614 return 2 + fragP
->tc_frag_data
.text_expansion
[0];
4621 next_frag_format_size (const fragS
*fragP
)
4623 const fragS
*next_fragP
= next_non_empty_frag (fragP
);
4624 return frag_format_size (next_fragP
);
4628 /* In early Xtensa Processors, for reasons that are unclear, the ISA
4629 required two-byte instructions to be treated as three-byte instructions
4630 for loop instruction alignment. This restriction was removed beginning
4631 with Xtensa LX. Now the only requirement on loop instruction alignment
4632 is that the first instruction of the loop must appear at an address that
4633 does not cross a fetch boundary. */
4636 get_loop_align_size (int insn_size
)
4638 if (insn_size
== XTENSA_UNDEFINED
)
4639 return xtensa_fetch_width
;
4641 if (enforce_three_byte_loop_align
&& insn_size
== 2)
4648 /* If the next legit fragment is an end-of-loop marker,
4649 switch its state so it will instantiate a NOP. */
4652 update_next_frag_state (fragS
*fragP
)
4654 fragS
*next_fragP
= fragP
->fr_next
;
4655 fragS
*new_target
= NULL
;
4659 /* We are guaranteed there will be one of these... */
4660 while (!(next_fragP
->fr_type
== rs_machine_dependent
4661 && (next_fragP
->fr_subtype
== RELAX_MAYBE_UNREACHABLE
4662 || next_fragP
->fr_subtype
== RELAX_UNREACHABLE
)))
4663 next_fragP
= next_fragP
->fr_next
;
4665 gas_assert (next_fragP
->fr_type
== rs_machine_dependent
4666 && (next_fragP
->fr_subtype
== RELAX_MAYBE_UNREACHABLE
4667 || next_fragP
->fr_subtype
== RELAX_UNREACHABLE
));
4669 /* ...and one of these. */
4670 new_target
= next_fragP
->fr_next
;
4671 while (!(new_target
->fr_type
== rs_machine_dependent
4672 && (new_target
->fr_subtype
== RELAX_MAYBE_DESIRE_ALIGN
4673 || new_target
->fr_subtype
== RELAX_DESIRE_ALIGN
)))
4674 new_target
= new_target
->fr_next
;
4676 gas_assert (new_target
->fr_type
== rs_machine_dependent
4677 && (new_target
->fr_subtype
== RELAX_MAYBE_DESIRE_ALIGN
4678 || new_target
->fr_subtype
== RELAX_DESIRE_ALIGN
));
4681 while (next_fragP
&& next_fragP
->fr_fix
== 0)
4683 if (next_fragP
->fr_type
== rs_machine_dependent
4684 && next_fragP
->fr_subtype
== RELAX_LOOP_END
)
4686 next_fragP
->fr_subtype
= RELAX_LOOP_END_ADD_NOP
;
4690 next_fragP
= next_fragP
->fr_next
;
4696 next_frag_is_branch_target (const fragS
*fragP
)
4698 /* Sometimes an empty will end up here due to storage allocation issues,
4699 so we have to skip until we find something legit. */
4700 for (fragP
= fragP
->fr_next
; fragP
; fragP
= fragP
->fr_next
)
4702 if (fragP
->tc_frag_data
.is_branch_target
)
4704 if (fragP
->fr_fix
!= 0)
4712 next_frag_is_loop_target (const fragS
*fragP
)
4714 /* Sometimes an empty will end up here due storage allocation issues.
4715 So we have to skip until we find something legit. */
4716 for (fragP
= fragP
->fr_next
; fragP
; fragP
= fragP
->fr_next
)
4718 if (fragP
->tc_frag_data
.is_loop_target
)
4720 if (fragP
->fr_fix
!= 0)
4727 /* As specified in the relaxation table, when a loop instruction is
4728 relaxed, there are 24 bytes between the loop instruction itself and
4729 the first instruction in the loop. */
4731 #define RELAXED_LOOP_INSN_BYTES 24
4734 next_frag_pre_opcode_bytes (const fragS
*fragp
)
4736 const fragS
*next_fragp
= fragp
->fr_next
;
4737 xtensa_opcode next_opcode
;
4739 if (!next_frag_opcode_is_loop (fragp
, &next_opcode
))
4742 /* Sometimes an empty will end up here due to storage allocation issues,
4743 so we have to skip until we find something legit. */
4744 while (next_fragp
->fr_fix
== 0)
4745 next_fragp
= next_fragp
->fr_next
;
4747 if (next_fragp
->fr_type
!= rs_machine_dependent
)
4750 /* There is some implicit knowledge encoded in here.
4751 The LOOP instructions that are NOT RELAX_IMMED have
4752 been relaxed. Note that we can assume that the LOOP
4753 instruction is in slot 0 because loops aren't bundleable. */
4754 if (next_fragp
->tc_frag_data
.slot_subtypes
[0] > RELAX_IMMED
)
4755 return get_expanded_loop_offset (next_opcode
) + RELAXED_LOOP_INSN_BYTES
;
4761 /* Mark a location where we can later insert literal frags. Update
4762 the section's literal_pool_loc, so subsequent literals can be
4763 placed nearest to their use. */
4766 xtensa_mark_literal_pool_location (void)
4768 /* Any labels pointing to the current location need
4769 to be adjusted to after the literal pool. */
4771 fragS
*pool_location
;
4773 if (use_literal_section
)
4776 /* We stash info in these frags so we can later move the literal's
4777 fixes into this frchain's fix list. */
4778 pool_location
= frag_now
;
4779 frag_now
->tc_frag_data
.lit_frchain
= frchain_now
;
4780 frag_now
->tc_frag_data
.literal_frag
= frag_now
;
4781 /* Just record this frag. */
4782 xtensa_maybe_create_literal_pool_frag (FALSE
, FALSE
);
4783 frag_variant (rs_machine_dependent
, 0, 0,
4784 RELAX_LITERAL_POOL_BEGIN
, NULL
, 0, NULL
);
4785 xtensa_set_frag_assembly_state (frag_now
);
4786 frag_now
->tc_frag_data
.lit_seg
= now_seg
;
4787 frag_variant (rs_machine_dependent
, 0, 0,
4788 RELAX_LITERAL_POOL_END
, NULL
, 0, NULL
);
4789 xtensa_set_frag_assembly_state (frag_now
);
4791 /* Now put a frag into the literal pool that points to this location. */
4792 set_literal_pool_location (now_seg
, pool_location
);
4793 xtensa_switch_to_non_abs_literal_fragment (&s
);
4794 frag_align (2, 0, 0);
4795 record_alignment (now_seg
, 2);
4797 /* Close whatever frag is there. */
4798 frag_variant (rs_fill
, 0, 0, 0, NULL
, 0, NULL
);
4799 xtensa_set_frag_assembly_state (frag_now
);
4800 frag_now
->tc_frag_data
.literal_frag
= pool_location
;
4801 frag_variant (rs_fill
, 0, 0, 0, NULL
, 0, NULL
);
4802 xtensa_restore_emit_state (&s
);
4803 xtensa_set_frag_assembly_state (frag_now
);
4807 /* Build a nop of the correct size into tinsn. */
4810 build_nop (TInsn
*tinsn
, int size
)
4816 tinsn
->opcode
= xtensa_nop_n_opcode
;
4818 if (tinsn
->opcode
== XTENSA_UNDEFINED
)
4819 as_fatal (_("opcode 'NOP.N' unavailable in this configuration"));
4823 if (xtensa_nop_opcode
== XTENSA_UNDEFINED
)
4825 tinsn
->opcode
= xtensa_or_opcode
;
4826 set_expr_const (&tinsn
->tok
[0], 1);
4827 set_expr_const (&tinsn
->tok
[1], 1);
4828 set_expr_const (&tinsn
->tok
[2], 1);
4832 tinsn
->opcode
= xtensa_nop_opcode
;
4834 gas_assert (tinsn
->opcode
!= XTENSA_UNDEFINED
);
4839 /* Assemble a NOP of the requested size in the buffer. User must have
4840 allocated "buf" with at least "size" bytes. */
4843 assemble_nop (int size
, char *buf
)
4845 static xtensa_insnbuf insnbuf
= NULL
;
4848 build_nop (&tinsn
, size
);
4851 insnbuf
= xtensa_insnbuf_alloc (xtensa_default_isa
);
4853 tinsn_to_insnbuf (&tinsn
, insnbuf
);
4854 xtensa_insnbuf_to_chars (xtensa_default_isa
, insnbuf
,
4855 (unsigned char *) buf
, 0);
4859 /* Return the number of bytes for the offset of the expanded loop
4860 instruction. This should be incorporated into the relaxation
4861 specification but is hard-coded here. This is used to auto-align
4862 the loop instruction. It is invalid to call this function if the
4863 configuration does not have loops or if the opcode is not a loop
4867 get_expanded_loop_offset (xtensa_opcode opcode
)
4869 /* This is the OFFSET of the loop instruction in the expanded loop.
4870 This MUST correspond directly to the specification of the loop
4871 expansion. It will be validated on fragment conversion. */
4872 gas_assert (opcode
!= XTENSA_UNDEFINED
);
4873 if (opcode
== xtensa_loop_opcode
)
4875 if (opcode
== xtensa_loopnez_opcode
)
4877 if (opcode
== xtensa_loopgtz_opcode
)
4879 as_fatal (_("get_expanded_loop_offset: invalid opcode"));
4885 get_literal_pool_location (segT seg
)
4887 struct litpool_seg
*lps
= litpool_seg_list
.next
;
4888 struct litpool_frag
*lpf
;
4889 for ( ; lps
&& lps
->seg
->id
!= seg
->id
; lps
= lps
->next
)
4893 for (lpf
= lps
->frag_list
.prev
; lpf
->fragP
; lpf
= lpf
->prev
)
4894 { /* Skip "candidates" for now. */
4895 if (lpf
->fragP
->fr_subtype
== RELAX_LITERAL_POOL_BEGIN
&&
4899 /* Must convert a lower-priority pool. */
4900 for (lpf
= lps
->frag_list
.prev
; lpf
->fragP
; lpf
= lpf
->prev
)
4902 if (lpf
->fragP
->fr_subtype
== RELAX_LITERAL_POOL_BEGIN
)
4905 /* Still no match -- try for a low priority pool. */
4906 for (lpf
= lps
->frag_list
.prev
; lpf
->fragP
; lpf
= lpf
->prev
)
4908 if (lpf
->fragP
->fr_subtype
== RELAX_LITERAL_POOL_CANDIDATE_BEGIN
)
4912 return seg_info (seg
)->tc_segment_info_data
.literal_pool_loc
;
4917 set_literal_pool_location (segT seg
, fragS
*literal_pool_loc
)
4919 seg_info (seg
)->tc_segment_info_data
.literal_pool_loc
= literal_pool_loc
;
4923 /* Set frag assembly state should be called when a new frag is
4924 opened and after a frag has been closed. */
4927 xtensa_set_frag_assembly_state (fragS
*fragP
)
4929 if (!density_supported
)
4930 fragP
->tc_frag_data
.is_no_density
= TRUE
;
4932 /* This function is called from subsegs_finish, which is called
4933 after xtensa_end, so we can't use "use_transform" or
4934 "use_schedule" here. */
4935 if (!directive_state
[directive_transform
])
4936 fragP
->tc_frag_data
.is_no_transform
= TRUE
;
4937 if (directive_state
[directive_longcalls
])
4938 fragP
->tc_frag_data
.use_longcalls
= TRUE
;
4939 fragP
->tc_frag_data
.use_absolute_literals
=
4940 directive_state
[directive_absolute_literals
];
4941 fragP
->tc_frag_data
.is_assembly_state_set
= TRUE
;
4946 relaxable_section (asection
*sec
)
4948 return ((sec
->flags
& SEC_DEBUGGING
) == 0
4949 && strcmp (sec
->name
, ".eh_frame") != 0);
4954 xtensa_mark_frags_for_org (void)
4958 /* Walk over each fragment of all of the current segments. If we find
4959 a .org frag in any of the segments, mark all frags prior to it as
4960 "no transform", which will prevent linker optimizations from messing
4961 up the .org distance. This should be done after
4962 xtensa_find_unmarked_state_frags, because we don't want to worry here
4963 about that function trashing the data we save here. */
4965 for (seclist
= &stdoutput
->sections
;
4966 seclist
&& *seclist
;
4967 seclist
= &(*seclist
)->next
)
4969 segT sec
= *seclist
;
4970 segment_info_type
*seginfo
;
4973 flags
= bfd_get_section_flags (stdoutput
, sec
);
4974 if (flags
& SEC_DEBUGGING
)
4976 if (!(flags
& SEC_ALLOC
))
4979 seginfo
= seg_info (sec
);
4980 if (seginfo
&& seginfo
->frchainP
)
4982 fragS
*last_fragP
= seginfo
->frchainP
->frch_root
;
4983 for (fragP
= seginfo
->frchainP
->frch_root
; fragP
;
4984 fragP
= fragP
->fr_next
)
4986 /* cvt_frag_to_fill has changed the fr_type of org frags to
4987 rs_fill, so use the value as cached in rs_subtype here. */
4988 if (fragP
->fr_subtype
== RELAX_ORG
)
4990 while (last_fragP
!= fragP
->fr_next
)
4992 last_fragP
->tc_frag_data
.is_no_transform
= TRUE
;
4993 last_fragP
= last_fragP
->fr_next
;
5003 xtensa_find_unmarked_state_frags (void)
5007 /* Walk over each fragment of all of the current segments. For each
5008 unmarked fragment, mark it with the same info as the previous
5010 for (seclist
= &stdoutput
->sections
;
5011 seclist
&& *seclist
;
5012 seclist
= &(*seclist
)->next
)
5014 segT sec
= *seclist
;
5015 segment_info_type
*seginfo
;
5018 flags
= bfd_get_section_flags (stdoutput
, sec
);
5019 if (flags
& SEC_DEBUGGING
)
5021 if (!(flags
& SEC_ALLOC
))
5024 seginfo
= seg_info (sec
);
5025 if (seginfo
&& seginfo
->frchainP
)
5027 fragS
*last_fragP
= 0;
5028 for (fragP
= seginfo
->frchainP
->frch_root
; fragP
;
5029 fragP
= fragP
->fr_next
)
5031 if (fragP
->fr_fix
!= 0
5032 && !fragP
->tc_frag_data
.is_assembly_state_set
)
5034 if (last_fragP
== 0)
5036 as_warn_where (fragP
->fr_file
, fragP
->fr_line
,
5037 _("assembly state not set for first frag in section %s"),
5042 fragP
->tc_frag_data
.is_assembly_state_set
= TRUE
;
5043 fragP
->tc_frag_data
.is_no_density
=
5044 last_fragP
->tc_frag_data
.is_no_density
;
5045 fragP
->tc_frag_data
.is_no_transform
=
5046 last_fragP
->tc_frag_data
.is_no_transform
;
5047 fragP
->tc_frag_data
.use_longcalls
=
5048 last_fragP
->tc_frag_data
.use_longcalls
;
5049 fragP
->tc_frag_data
.use_absolute_literals
=
5050 last_fragP
->tc_frag_data
.use_absolute_literals
;
5053 if (fragP
->tc_frag_data
.is_assembly_state_set
)
5062 xtensa_find_unaligned_branch_targets (bfd
*abfd ATTRIBUTE_UNUSED
,
5064 void *unused ATTRIBUTE_UNUSED
)
5066 flagword flags
= bfd_get_section_flags (abfd
, sec
);
5067 segment_info_type
*seginfo
= seg_info (sec
);
5068 fragS
*frag
= seginfo
->frchainP
->frch_root
;
5070 if (flags
& SEC_CODE
)
5072 xtensa_isa isa
= xtensa_default_isa
;
5073 xtensa_insnbuf insnbuf
= xtensa_insnbuf_alloc (isa
);
5074 while (frag
!= NULL
)
5076 if (frag
->tc_frag_data
.is_branch_target
)
5079 addressT branch_align
, frag_addr
;
5082 xtensa_insnbuf_from_chars
5083 (isa
, insnbuf
, (unsigned char *) frag
->fr_literal
, 0);
5084 fmt
= xtensa_format_decode (isa
, insnbuf
);
5085 op_size
= xtensa_format_length (isa
, fmt
);
5086 branch_align
= 1 << branch_align_power (sec
);
5087 frag_addr
= frag
->fr_address
% branch_align
;
5088 if (frag_addr
+ op_size
> branch_align
)
5089 as_warn_where (frag
->fr_file
, frag
->fr_line
,
5090 _("unaligned branch target: %d bytes at 0x%lx"),
5091 op_size
, (long) frag
->fr_address
);
5093 frag
= frag
->fr_next
;
5095 xtensa_insnbuf_free (isa
, insnbuf
);
5101 xtensa_find_unaligned_loops (bfd
*abfd ATTRIBUTE_UNUSED
,
5103 void *unused ATTRIBUTE_UNUSED
)
5105 flagword flags
= bfd_get_section_flags (abfd
, sec
);
5106 segment_info_type
*seginfo
= seg_info (sec
);
5107 fragS
*frag
= seginfo
->frchainP
->frch_root
;
5108 xtensa_isa isa
= xtensa_default_isa
;
5110 if (flags
& SEC_CODE
)
5112 xtensa_insnbuf insnbuf
= xtensa_insnbuf_alloc (isa
);
5113 while (frag
!= NULL
)
5115 if (frag
->tc_frag_data
.is_first_loop_insn
)
5121 if (frag
->fr_fix
== 0)
5122 frag
= next_non_empty_frag (frag
);
5126 xtensa_insnbuf_from_chars
5127 (isa
, insnbuf
, (unsigned char *) frag
->fr_literal
, 0);
5128 fmt
= xtensa_format_decode (isa
, insnbuf
);
5129 op_size
= xtensa_format_length (isa
, fmt
);
5130 frag_addr
= frag
->fr_address
% xtensa_fetch_width
;
5132 if (frag_addr
+ op_size
> xtensa_fetch_width
)
5133 as_warn_where (frag
->fr_file
, frag
->fr_line
,
5134 _("unaligned loop: %d bytes at 0x%lx"),
5135 op_size
, (long) frag
->fr_address
);
5138 frag
= frag
->fr_next
;
5140 xtensa_insnbuf_free (isa
, insnbuf
);
5146 xg_apply_fix_value (fixS
*fixP
, valueT val
)
5148 xtensa_isa isa
= xtensa_default_isa
;
5149 static xtensa_insnbuf insnbuf
= NULL
;
5150 static xtensa_insnbuf slotbuf
= NULL
;
5153 bfd_boolean alt_reloc
;
5154 xtensa_opcode opcode
;
5155 char *const fixpos
= fixP
->fx_frag
->fr_literal
+ fixP
->fx_where
;
5157 if (decode_reloc (fixP
->fx_r_type
, &slot
, &alt_reloc
)
5159 as_fatal (_("unexpected fix"));
5163 insnbuf
= xtensa_insnbuf_alloc (isa
);
5164 slotbuf
= xtensa_insnbuf_alloc (isa
);
5167 xtensa_insnbuf_from_chars (isa
, insnbuf
, (unsigned char *) fixpos
, 0);
5168 fmt
= xtensa_format_decode (isa
, insnbuf
);
5169 if (fmt
== XTENSA_UNDEFINED
)
5170 as_fatal (_("undecodable fix"));
5171 xtensa_format_get_slot (isa
, fmt
, slot
, insnbuf
, slotbuf
);
5172 opcode
= xtensa_opcode_decode (isa
, fmt
, slot
, slotbuf
);
5173 if (opcode
== XTENSA_UNDEFINED
)
5174 as_fatal (_("undecodable fix"));
5176 /* CONST16 immediates are not PC-relative, despite the fact that we
5177 reuse the normal PC-relative operand relocations for the low part
5178 of a CONST16 operand. */
5179 if (opcode
== xtensa_const16_opcode
)
5182 xtensa_insnbuf_set_operand (slotbuf
, fmt
, slot
, opcode
,
5183 get_relaxable_immed (opcode
), val
,
5184 fixP
->fx_file
, fixP
->fx_line
);
5186 xtensa_format_set_slot (isa
, fmt
, slot
, insnbuf
, slotbuf
);
5187 xtensa_insnbuf_to_chars (isa
, insnbuf
, (unsigned char *) fixpos
, 0);
5193 /* External Functions and Other GAS Hooks. */
5196 xtensa_target_format (void)
5198 return (target_big_endian
? "elf32-xtensa-be" : "elf32-xtensa-le");
5203 xtensa_file_arch_init (bfd
*abfd
)
5205 bfd_set_private_flags (abfd
, 0x100 | 0x200);
5210 md_number_to_chars (char *buf
, valueT val
, int n
)
5212 if (target_big_endian
)
5213 number_to_chars_bigendian (buf
, val
, n
);
5215 number_to_chars_littleendian (buf
, val
, n
);
5219 xg_init_global_config (void)
5221 target_big_endian
= XCHAL_HAVE_BE
;
5223 density_supported
= XCHAL_HAVE_DENSITY
;
5224 absolute_literals_supported
= XSHAL_USE_ABSOLUTE_LITERALS
;
5225 xtensa_fetch_width
= XCHAL_INST_FETCH_WIDTH
;
5227 directive_state
[directive_density
] = XCHAL_HAVE_DENSITY
;
5228 directive_state
[directive_absolute_literals
] = XSHAL_USE_ABSOLUTE_LITERALS
;
5232 xtensa_init (int argc ATTRIBUTE_UNUSED
, char **argv ATTRIBUTE_UNUSED
)
5234 xg_init_global_config ();
5237 /* This function is called once, at assembler startup time. It should
5238 set up all the tables, etc. that the MD part of the assembler will
5244 segT current_section
= now_seg
;
5245 int current_subsec
= now_subseg
;
5249 xtensa_default_isa
= xtensa_isa_init (0, 0);
5250 isa
= xtensa_default_isa
;
5254 /* Set up the literal sections. */
5255 memset (&default_lit_sections
, 0, sizeof (default_lit_sections
));
5257 subseg_set (current_section
, current_subsec
);
5259 xtensa_addi_opcode
= xtensa_opcode_lookup (isa
, "addi");
5260 xtensa_addmi_opcode
= xtensa_opcode_lookup (isa
, "addmi");
5261 xtensa_call0_opcode
= xtensa_opcode_lookup (isa
, "call0");
5262 xtensa_call4_opcode
= xtensa_opcode_lookup (isa
, "call4");
5263 xtensa_call8_opcode
= xtensa_opcode_lookup (isa
, "call8");
5264 xtensa_call12_opcode
= xtensa_opcode_lookup (isa
, "call12");
5265 xtensa_callx0_opcode
= xtensa_opcode_lookup (isa
, "callx0");
5266 xtensa_callx4_opcode
= xtensa_opcode_lookup (isa
, "callx4");
5267 xtensa_callx8_opcode
= xtensa_opcode_lookup (isa
, "callx8");
5268 xtensa_callx12_opcode
= xtensa_opcode_lookup (isa
, "callx12");
5269 xtensa_const16_opcode
= xtensa_opcode_lookup (isa
, "const16");
5270 xtensa_entry_opcode
= xtensa_opcode_lookup (isa
, "entry");
5271 xtensa_extui_opcode
= xtensa_opcode_lookup (isa
, "extui");
5272 xtensa_movi_opcode
= xtensa_opcode_lookup (isa
, "movi");
5273 xtensa_movi_n_opcode
= xtensa_opcode_lookup (isa
, "movi.n");
5274 xtensa_isync_opcode
= xtensa_opcode_lookup (isa
, "isync");
5275 xtensa_j_opcode
= xtensa_opcode_lookup (isa
, "j");
5276 xtensa_jx_opcode
= xtensa_opcode_lookup (isa
, "jx");
5277 xtensa_l32r_opcode
= xtensa_opcode_lookup (isa
, "l32r");
5278 xtensa_loop_opcode
= xtensa_opcode_lookup (isa
, "loop");
5279 xtensa_loopnez_opcode
= xtensa_opcode_lookup (isa
, "loopnez");
5280 xtensa_loopgtz_opcode
= xtensa_opcode_lookup (isa
, "loopgtz");
5281 xtensa_nop_opcode
= xtensa_opcode_lookup (isa
, "nop");
5282 xtensa_nop_n_opcode
= xtensa_opcode_lookup (isa
, "nop.n");
5283 xtensa_or_opcode
= xtensa_opcode_lookup (isa
, "or");
5284 xtensa_ret_opcode
= xtensa_opcode_lookup (isa
, "ret");
5285 xtensa_ret_n_opcode
= xtensa_opcode_lookup (isa
, "ret.n");
5286 xtensa_retw_opcode
= xtensa_opcode_lookup (isa
, "retw");
5287 xtensa_retw_n_opcode
= xtensa_opcode_lookup (isa
, "retw.n");
5288 xtensa_rsr_lcount_opcode
= xtensa_opcode_lookup (isa
, "rsr.lcount");
5289 xtensa_waiti_opcode
= xtensa_opcode_lookup (isa
, "waiti");
5291 for (i
= 0; i
< xtensa_isa_num_formats (isa
); i
++)
5293 int format_slots
= xtensa_format_num_slots (isa
, i
);
5294 if (format_slots
> config_max_slots
)
5295 config_max_slots
= format_slots
;
5298 xg_init_vinsn (&cur_vinsn
);
5300 xtensa_num_pipe_stages
= xtensa_isa_num_pipe_stages (isa
);
5302 init_op_placement_info_table ();
5304 /* Set up the assembly state. */
5305 if (!frag_now
->tc_frag_data
.is_assembly_state_set
)
5306 xtensa_set_frag_assembly_state (frag_now
);
5310 /* TC_INIT_FIX_DATA hook */
5313 xtensa_init_fix_data (fixS
*x
)
5315 x
->tc_fix_data
.slot
= 0;
5316 x
->tc_fix_data
.X_add_symbol
= NULL
;
5317 x
->tc_fix_data
.X_add_number
= 0;
5321 /* tc_frob_label hook */
5324 xtensa_frob_label (symbolS
*sym
)
5328 if (cur_vinsn
.inside_bundle
)
5330 as_bad (_("labels are not valid inside bundles"));
5334 freq
= get_subseg_target_freq (now_seg
, now_subseg
);
5336 /* Since the label was already attached to a frag associated with the
5337 previous basic block, it now needs to be reset to the current frag. */
5338 symbol_set_frag (sym
, frag_now
);
5339 S_SET_VALUE (sym
, (valueT
) frag_now_fix ());
5341 if (generating_literals
)
5342 xtensa_add_literal_sym (sym
);
5344 xtensa_add_insn_label (sym
);
5346 if (symbol_get_tc (sym
)->is_loop_target
)
5348 if ((get_last_insn_flags (now_seg
, now_subseg
)
5349 & FLAG_IS_BAD_LOOPEND
) != 0)
5350 as_bad (_("invalid last instruction for a zero-overhead loop"));
5352 xtensa_set_frag_assembly_state (frag_now
);
5353 frag_var (rs_machine_dependent
, 4, 4, RELAX_LOOP_END
,
5354 frag_now
->fr_symbol
, frag_now
->fr_offset
, NULL
);
5356 xtensa_set_frag_assembly_state (frag_now
);
5357 xtensa_move_labels (frag_now
, 0);
5360 /* No target aligning in the absolute section. */
5361 if (now_seg
!= absolute_section
5362 && !is_unaligned_label (sym
)
5363 && !generating_literals
)
5365 xtensa_set_frag_assembly_state (frag_now
);
5367 if (do_align_targets ())
5368 frag_var (rs_machine_dependent
, 0, (int) freq
,
5369 RELAX_DESIRE_ALIGN_IF_TARGET
, frag_now
->fr_symbol
,
5370 frag_now
->fr_offset
, NULL
);
5372 frag_var (rs_fill
, 0, 0, frag_now
->fr_subtype
,
5373 frag_now
->fr_symbol
, frag_now
->fr_offset
, NULL
);
5374 xtensa_set_frag_assembly_state (frag_now
);
5375 xtensa_move_labels (frag_now
, 0);
5378 /* We need to mark the following properties even if we aren't aligning. */
5380 /* If the label is already known to be a branch target, i.e., a
5381 forward branch, mark the frag accordingly. Backward branches
5382 are handled by xg_add_branch_and_loop_targets. */
5383 if (symbol_get_tc (sym
)->is_branch_target
)
5384 symbol_get_frag (sym
)->tc_frag_data
.is_branch_target
= TRUE
;
5386 /* Loops only go forward, so they can be identified here. */
5387 if (symbol_get_tc (sym
)->is_loop_target
)
5388 symbol_get_frag (sym
)->tc_frag_data
.is_loop_target
= TRUE
;
5390 dwarf2_emit_label (sym
);
5394 /* tc_unrecognized_line hook */
5397 xtensa_unrecognized_line (int ch
)
5402 if (cur_vinsn
.inside_bundle
== 0)
5404 /* PR8110: Cannot emit line number info inside a FLIX bundle
5405 when using --gstabs. Temporarily disable debug info. */
5406 generate_lineno_debug ();
5407 if (debug_type
== DEBUG_STABS
)
5409 xt_saved_debug_type
= debug_type
;
5410 debug_type
= DEBUG_NONE
;
5413 cur_vinsn
.inside_bundle
= 1;
5417 as_bad (_("extra opening brace"));
5423 if (cur_vinsn
.inside_bundle
)
5424 finish_vinsn (&cur_vinsn
);
5427 as_bad (_("extra closing brace"));
5432 as_bad (_("syntax error"));
5439 /* md_flush_pending_output hook */
5442 xtensa_flush_pending_output (void)
5444 /* This line fixes a bug where automatically generated gstabs info
5445 separates a function label from its entry instruction, ending up
5446 with the literal position between the function label and the entry
5447 instruction and crashing code. It only happens with --gstabs and
5448 --text-section-literals, and when several other obscure relaxation
5449 conditions are met. */
5450 if (outputting_stabs_line_debug
)
5453 if (cur_vinsn
.inside_bundle
)
5454 as_bad (_("missing closing brace"));
5456 /* If there is a non-zero instruction fragment, close it. */
5457 if (frag_now_fix () != 0 && frag_now
->tc_frag_data
.is_insn
)
5459 frag_wane (frag_now
);
5461 xtensa_set_frag_assembly_state (frag_now
);
5463 frag_now
->tc_frag_data
.is_insn
= FALSE
;
5465 xtensa_clear_insn_labels ();
5469 /* We had an error while parsing an instruction. The string might look
5470 like this: "insn arg1, arg2 }". If so, we need to see the closing
5471 brace and reset some fields. Otherwise, the vinsn never gets closed
5472 and the num_slots field will grow past the end of the array of slots,
5473 and bad things happen. */
5476 error_reset_cur_vinsn (void)
5478 if (cur_vinsn
.inside_bundle
)
5480 if (*input_line_pointer
== '}'
5481 || *(input_line_pointer
- 1) == '}'
5482 || *(input_line_pointer
- 2) == '}')
5483 xg_clear_vinsn (&cur_vinsn
);
5489 md_assemble (char *str
)
5491 xtensa_isa isa
= xtensa_default_isa
;
5494 bfd_boolean has_underbar
= FALSE
;
5495 char *arg_strings
[MAX_INSN_ARGS
];
5497 TInsn orig_insn
; /* Original instruction from the input. */
5499 tinsn_init (&orig_insn
);
5501 /* Split off the opcode. */
5502 opnamelen
= strspn (str
, "abcdefghijklmnopqrstuvwxyz_/0123456789.");
5503 opname
= xstrndup (str
, opnamelen
);
5505 num_args
= tokenize_arguments (arg_strings
, str
+ opnamelen
);
5508 as_bad (_("syntax error"));
5512 if (xg_translate_idioms (&opname
, &num_args
, arg_strings
))
5515 /* Check for an underbar prefix. */
5518 has_underbar
= TRUE
;
5522 orig_insn
.insn_type
= ITYPE_INSN
;
5524 orig_insn
.is_specific_opcode
= (has_underbar
|| !use_transform ());
5525 orig_insn
.opcode
= xtensa_opcode_lookup (isa
, opname
);
5527 /* Special case: Check for "CALLXn.TLS" pseudo op. If found, grab its
5528 extra argument and set the opcode to "CALLXn". */
5529 if (orig_insn
.opcode
== XTENSA_UNDEFINED
5530 && strncasecmp (opname
, "callx", 5) == 0)
5532 unsigned long window_size
;
5535 window_size
= strtoul (opname
+ 5, &suffix
, 10);
5536 if (suffix
!= opname
+ 5
5537 && (window_size
== 0
5540 || window_size
== 12)
5541 && strcasecmp (suffix
, ".tls") == 0)
5543 switch (window_size
)
5545 case 0: orig_insn
.opcode
= xtensa_callx0_opcode
; break;
5546 case 4: orig_insn
.opcode
= xtensa_callx4_opcode
; break;
5547 case 8: orig_insn
.opcode
= xtensa_callx8_opcode
; break;
5548 case 12: orig_insn
.opcode
= xtensa_callx12_opcode
; break;
5552 as_bad (_("wrong number of operands for '%s'"), opname
);
5555 bfd_reloc_code_real_type reloc
;
5556 char *old_input_line_pointer
;
5557 expressionS
*tok
= &orig_insn
.extra_arg
;
5559 old_input_line_pointer
= input_line_pointer
;
5560 input_line_pointer
= arg_strings
[num_args
- 1];
5563 if (tok
->X_op
== O_symbol
5564 && ((reloc
= xtensa_elf_suffix (&input_line_pointer
, tok
))
5565 == BFD_RELOC_XTENSA_TLS_CALL
))
5566 tok
->X_op
= map_suffix_reloc_to_operator (reloc
);
5568 as_bad (_("bad relocation expression for '%s'"), opname
);
5570 input_line_pointer
= old_input_line_pointer
;
5576 /* Special case: Check for "j.l" pseudo op. */
5577 if (orig_insn
.opcode
== XTENSA_UNDEFINED
5578 && strncasecmp (opname
, "j.l", 3) == 0)
5581 as_bad (_("wrong number of operands for '%s'"), opname
);
5584 char *old_input_line_pointer
;
5585 expressionS
*tok
= &orig_insn
.extra_arg
;
5587 old_input_line_pointer
= input_line_pointer
;
5588 input_line_pointer
= arg_strings
[num_args
- 1];
5590 expression_maybe_register (xtensa_jx_opcode
, 0, tok
);
5591 input_line_pointer
= old_input_line_pointer
;
5594 orig_insn
.opcode
= xtensa_j_opcode
;
5598 if (orig_insn
.opcode
== XTENSA_UNDEFINED
)
5600 xtensa_format fmt
= xtensa_format_lookup (isa
, opname
);
5601 if (fmt
== XTENSA_UNDEFINED
)
5603 as_bad (_("unknown opcode or format name '%s'"), opname
);
5604 error_reset_cur_vinsn ();
5607 if (!cur_vinsn
.inside_bundle
)
5609 as_bad (_("format names only valid inside bundles"));
5610 error_reset_cur_vinsn ();
5613 if (cur_vinsn
.format
!= XTENSA_UNDEFINED
)
5614 as_warn (_("multiple formats specified for one bundle; using '%s'"),
5616 cur_vinsn
.format
= fmt
;
5617 free (has_underbar
? opname
- 1 : opname
);
5618 error_reset_cur_vinsn ();
5622 /* Parse the arguments. */
5623 if (parse_arguments (&orig_insn
, num_args
, arg_strings
))
5625 as_bad (_("syntax error"));
5626 error_reset_cur_vinsn ();
5630 /* Free the opcode and argument strings, now that they've been parsed. */
5631 free (has_underbar
? opname
- 1 : opname
);
5633 while (num_args
-- > 0)
5634 free (arg_strings
[num_args
]);
5636 /* Get expressions for invisible operands. */
5637 if (get_invisible_operands (&orig_insn
))
5639 error_reset_cur_vinsn ();
5643 /* Check for the right number and type of arguments. */
5644 if (tinsn_check_arguments (&orig_insn
))
5646 error_reset_cur_vinsn ();
5650 /* Record the line number for each TInsn, because a FLIX bundle may be
5651 spread across multiple input lines and individual instructions may be
5652 moved around in some cases. */
5653 orig_insn
.loc_directive_seen
= dwarf2_loc_directive_seen
;
5654 dwarf2_where (&orig_insn
.debug_line
);
5655 dwarf2_consume_line_info ();
5657 xg_add_branch_and_loop_targets (&orig_insn
);
5659 /* Check that immediate value for ENTRY is >= 16. */
5660 if (orig_insn
.opcode
== xtensa_entry_opcode
&& orig_insn
.ntok
>= 3)
5662 expressionS
*exp
= &orig_insn
.tok
[2];
5663 if (exp
->X_op
== O_constant
&& exp
->X_add_number
< 16)
5664 as_warn (_("entry instruction with stack decrement < 16"));
5668 assemble_tokens (opcode, tok, ntok);
5669 expand the tokens from the orig_insn into the
5670 stack of instructions that will not expand
5671 unless required at relaxation time. */
5673 if (!cur_vinsn
.inside_bundle
)
5674 emit_single_op (&orig_insn
);
5675 else /* We are inside a bundle. */
5677 cur_vinsn
.slots
[cur_vinsn
.num_slots
] = orig_insn
;
5678 cur_vinsn
.num_slots
++;
5679 if (*input_line_pointer
== '}'
5680 || *(input_line_pointer
- 1) == '}'
5681 || *(input_line_pointer
- 2) == '}')
5682 finish_vinsn (&cur_vinsn
);
5685 /* We've just emitted a new instruction so clear the list of labels. */
5686 xtensa_clear_insn_labels ();
5688 xtensa_check_frag_count ();
5692 /* HANDLE_ALIGN hook */
5694 /* For a .align directive, we mark the previous block with the alignment
5695 information. This will be placed in the object file in the
5696 property section corresponding to this section. */
5699 xtensa_handle_align (fragS
*fragP
)
5702 && ! fragP
->tc_frag_data
.is_literal
5703 && (fragP
->fr_type
== rs_align
5704 || fragP
->fr_type
== rs_align_code
)
5705 && fragP
->fr_offset
> 0
5706 && now_seg
!= bss_section
)
5708 fragP
->tc_frag_data
.is_align
= TRUE
;
5709 fragP
->tc_frag_data
.alignment
= fragP
->fr_offset
;
5712 if (fragP
->fr_type
== rs_align_test
)
5715 count
= fragP
->fr_next
->fr_address
- fragP
->fr_address
- fragP
->fr_fix
;
5717 as_bad_where (fragP
->fr_file
, fragP
->fr_line
,
5718 _("unaligned entry instruction"));
5721 if (linkrelax
&& fragP
->fr_type
== rs_org
)
5722 fragP
->fr_subtype
= RELAX_ORG
;
5726 /* TC_FRAG_INIT hook */
5729 xtensa_frag_init (fragS
*frag
)
5731 xtensa_set_frag_assembly_state (frag
);
5736 md_undefined_symbol (char *name ATTRIBUTE_UNUSED
)
5742 /* Round up a section size to the appropriate boundary. */
5745 md_section_align (segT segment ATTRIBUTE_UNUSED
, valueT size
)
5747 return size
; /* Byte alignment is fine. */
5752 md_pcrel_from (fixS
*fixP
)
5755 static xtensa_insnbuf insnbuf
= NULL
;
5756 static xtensa_insnbuf slotbuf
= NULL
;
5759 xtensa_opcode opcode
;
5762 xtensa_isa isa
= xtensa_default_isa
;
5763 valueT addr
= fixP
->fx_where
+ fixP
->fx_frag
->fr_address
;
5764 bfd_boolean alt_reloc
;
5766 if (fixP
->fx_r_type
== BFD_RELOC_XTENSA_ASM_EXPAND
)
5769 if (fixP
->fx_r_type
== BFD_RELOC_32_PCREL
)
5774 insnbuf
= xtensa_insnbuf_alloc (isa
);
5775 slotbuf
= xtensa_insnbuf_alloc (isa
);
5778 insn_p
= &fixP
->fx_frag
->fr_literal
[fixP
->fx_where
];
5779 xtensa_insnbuf_from_chars (isa
, insnbuf
, (unsigned char *) insn_p
, 0);
5780 fmt
= xtensa_format_decode (isa
, insnbuf
);
5782 if (fmt
== XTENSA_UNDEFINED
)
5783 as_fatal (_("bad instruction format"));
5785 if (decode_reloc (fixP
->fx_r_type
, &slot
, &alt_reloc
) != 0)
5786 as_fatal (_("invalid relocation"));
5788 xtensa_format_get_slot (isa
, fmt
, slot
, insnbuf
, slotbuf
);
5789 opcode
= xtensa_opcode_decode (isa
, fmt
, slot
, slotbuf
);
5791 /* Check for "alternate" relocations (operand not specified). None
5792 of the current uses for these are really PC-relative. */
5793 if (alt_reloc
|| opcode
== xtensa_const16_opcode
)
5795 if (opcode
!= xtensa_l32r_opcode
5796 && opcode
!= xtensa_const16_opcode
)
5797 as_fatal (_("invalid relocation for '%s' instruction"),
5798 xtensa_opcode_name (isa
, opcode
));
5802 opnum
= get_relaxable_immed (opcode
);
5804 if (xtensa_operand_is_PCrelative (isa
, opcode
, opnum
) != 1
5805 || xtensa_operand_do_reloc (isa
, opcode
, opnum
, &opnd_value
, addr
))
5807 as_bad_where (fixP
->fx_file
,
5809 _("invalid relocation for operand %d of '%s'"),
5810 opnum
, xtensa_opcode_name (isa
, opcode
));
5813 return 0 - opnd_value
;
5817 /* TC_FORCE_RELOCATION hook */
5820 xtensa_force_relocation (fixS
*fix
)
5822 switch (fix
->fx_r_type
)
5824 case BFD_RELOC_XTENSA_ASM_EXPAND
:
5825 case BFD_RELOC_XTENSA_SLOT0_ALT
:
5826 case BFD_RELOC_XTENSA_SLOT1_ALT
:
5827 case BFD_RELOC_XTENSA_SLOT2_ALT
:
5828 case BFD_RELOC_XTENSA_SLOT3_ALT
:
5829 case BFD_RELOC_XTENSA_SLOT4_ALT
:
5830 case BFD_RELOC_XTENSA_SLOT5_ALT
:
5831 case BFD_RELOC_XTENSA_SLOT6_ALT
:
5832 case BFD_RELOC_XTENSA_SLOT7_ALT
:
5833 case BFD_RELOC_XTENSA_SLOT8_ALT
:
5834 case BFD_RELOC_XTENSA_SLOT9_ALT
:
5835 case BFD_RELOC_XTENSA_SLOT10_ALT
:
5836 case BFD_RELOC_XTENSA_SLOT11_ALT
:
5837 case BFD_RELOC_XTENSA_SLOT12_ALT
:
5838 case BFD_RELOC_XTENSA_SLOT13_ALT
:
5839 case BFD_RELOC_XTENSA_SLOT14_ALT
:
5845 if (linkrelax
&& fix
->fx_addsy
5846 && relaxable_section (S_GET_SEGMENT (fix
->fx_addsy
)))
5849 return generic_force_reloc (fix
);
5853 /* TC_VALIDATE_FIX_SUB hook */
5856 xtensa_validate_fix_sub (fixS
*fix
)
5858 segT add_symbol_segment
, sub_symbol_segment
;
5860 /* The difference of two symbols should be resolved by the assembler when
5861 linkrelax is not set. If the linker may relax the section containing
5862 the symbols, then an Xtensa DIFF relocation must be generated so that
5863 the linker knows to adjust the difference value. */
5864 if (!linkrelax
|| fix
->fx_addsy
== NULL
)
5867 /* Make sure both symbols are in the same segment, and that segment is
5868 "normal" and relaxable. If the segment is not "normal", then the
5869 fix is not valid. If the segment is not "relaxable", then the fix
5870 should have been handled earlier. */
5871 add_symbol_segment
= S_GET_SEGMENT (fix
->fx_addsy
);
5872 if (! SEG_NORMAL (add_symbol_segment
) ||
5873 ! relaxable_section (add_symbol_segment
))
5875 sub_symbol_segment
= S_GET_SEGMENT (fix
->fx_subsy
);
5876 return (sub_symbol_segment
== add_symbol_segment
);
5880 /* NO_PSEUDO_DOT hook */
5882 /* This function has nothing to do with pseudo dots, but this is the
5883 nearest macro to where the check needs to take place. FIXME: This
5887 xtensa_check_inside_bundle (void)
5889 if (cur_vinsn
.inside_bundle
&& input_line_pointer
[-1] == '.')
5890 as_bad (_("directives are not valid inside bundles"));
5892 /* This function must always return FALSE because it is called via a
5893 macro that has nothing to do with bundling. */
5898 /* md_elf_section_change_hook */
5901 xtensa_elf_section_change_hook (void)
5903 /* Set up the assembly state. */
5904 if (!frag_now
->tc_frag_data
.is_assembly_state_set
)
5905 xtensa_set_frag_assembly_state (frag_now
);
5909 /* tc_fix_adjustable hook */
5912 xtensa_fix_adjustable (fixS
*fixP
)
5914 /* We need the symbol name for the VTABLE entries. */
5915 if (fixP
->fx_r_type
== BFD_RELOC_VTABLE_INHERIT
5916 || fixP
->fx_r_type
== BFD_RELOC_VTABLE_ENTRY
)
5923 /* tc_symbol_new_hook */
5925 symbolS
*expr_symbols
= NULL
;
5928 xtensa_symbol_new_hook (symbolS
*sym
)
5930 if (is_leb128_expr
&& S_GET_SEGMENT (sym
) == expr_section
)
5932 symbol_get_tc (sym
)->next_expr_symbol
= expr_symbols
;
5939 md_apply_fix (fixS
*fixP
, valueT
*valP
, segT seg
)
5941 char *const fixpos
= fixP
->fx_frag
->fr_literal
+ fixP
->fx_where
;
5944 /* Subtracted symbols are only allowed for a few relocation types, and
5945 unless linkrelax is enabled, they should not make it to this point. */
5946 if (fixP
->fx_subsy
&& !(linkrelax
&& (fixP
->fx_r_type
== BFD_RELOC_32
5947 || fixP
->fx_r_type
== BFD_RELOC_16
5948 || fixP
->fx_r_type
== BFD_RELOC_8
)))
5949 as_bad_where (fixP
->fx_file
, fixP
->fx_line
, _("expression too complex"));
5951 switch (fixP
->fx_r_type
)
5953 case BFD_RELOC_32_PCREL
:
5959 switch (fixP
->fx_r_type
)
5962 fixP
->fx_r_type
= BFD_RELOC_XTENSA_DIFF8
;
5963 fixP
->fx_signed
= 0;
5966 fixP
->fx_r_type
= BFD_RELOC_XTENSA_DIFF16
;
5967 fixP
->fx_signed
= 0;
5970 fixP
->fx_r_type
= BFD_RELOC_XTENSA_DIFF32
;
5971 fixP
->fx_signed
= 0;
5977 val
= (S_GET_VALUE (fixP
->fx_addsy
) + fixP
->fx_offset
5978 - S_GET_VALUE (fixP
->fx_subsy
));
5980 /* The difference value gets written out, and the DIFF reloc
5981 identifies the address of the subtracted symbol (i.e., the one
5982 with the lowest address). */
5984 fixP
->fx_offset
-= val
;
5985 fixP
->fx_subsy
= NULL
;
5987 else if (! fixP
->fx_addsy
)
5994 case BFD_RELOC_XTENSA_PLT
:
5995 md_number_to_chars (fixpos
, val
, fixP
->fx_size
);
5996 fixP
->fx_no_overflow
= 0; /* Use the standard overflow check. */
5999 case BFD_RELOC_XTENSA_TLSDESC_FN
:
6000 case BFD_RELOC_XTENSA_TLSDESC_ARG
:
6001 case BFD_RELOC_XTENSA_TLS_TPOFF
:
6002 case BFD_RELOC_XTENSA_TLS_DTPOFF
:
6003 S_SET_THREAD_LOCAL (fixP
->fx_addsy
);
6004 md_number_to_chars (fixpos
, 0, fixP
->fx_size
);
6005 fixP
->fx_no_overflow
= 0; /* Use the standard overflow check. */
6008 case BFD_RELOC_XTENSA_SLOT0_OP
:
6009 case BFD_RELOC_XTENSA_SLOT1_OP
:
6010 case BFD_RELOC_XTENSA_SLOT2_OP
:
6011 case BFD_RELOC_XTENSA_SLOT3_OP
:
6012 case BFD_RELOC_XTENSA_SLOT4_OP
:
6013 case BFD_RELOC_XTENSA_SLOT5_OP
:
6014 case BFD_RELOC_XTENSA_SLOT6_OP
:
6015 case BFD_RELOC_XTENSA_SLOT7_OP
:
6016 case BFD_RELOC_XTENSA_SLOT8_OP
:
6017 case BFD_RELOC_XTENSA_SLOT9_OP
:
6018 case BFD_RELOC_XTENSA_SLOT10_OP
:
6019 case BFD_RELOC_XTENSA_SLOT11_OP
:
6020 case BFD_RELOC_XTENSA_SLOT12_OP
:
6021 case BFD_RELOC_XTENSA_SLOT13_OP
:
6022 case BFD_RELOC_XTENSA_SLOT14_OP
:
6025 /* Write the tentative value of a PC-relative relocation to a
6026 local symbol into the instruction. The value will be ignored
6027 by the linker, and it makes the object file disassembly
6028 readable when all branch targets are encoded in relocations. */
6030 gas_assert (fixP
->fx_addsy
);
6031 if (S_GET_SEGMENT (fixP
->fx_addsy
) == seg
6032 && !S_FORCE_RELOC (fixP
->fx_addsy
, 1))
6034 val
= (S_GET_VALUE (fixP
->fx_addsy
) + fixP
->fx_offset
6035 - md_pcrel_from (fixP
));
6036 (void) xg_apply_fix_value (fixP
, val
);
6039 else if (! fixP
->fx_addsy
)
6042 if (xg_apply_fix_value (fixP
, val
))
6047 case BFD_RELOC_XTENSA_ASM_EXPAND
:
6048 case BFD_RELOC_XTENSA_TLS_FUNC
:
6049 case BFD_RELOC_XTENSA_TLS_ARG
:
6050 case BFD_RELOC_XTENSA_TLS_CALL
:
6051 case BFD_RELOC_XTENSA_SLOT0_ALT
:
6052 case BFD_RELOC_XTENSA_SLOT1_ALT
:
6053 case BFD_RELOC_XTENSA_SLOT2_ALT
:
6054 case BFD_RELOC_XTENSA_SLOT3_ALT
:
6055 case BFD_RELOC_XTENSA_SLOT4_ALT
:
6056 case BFD_RELOC_XTENSA_SLOT5_ALT
:
6057 case BFD_RELOC_XTENSA_SLOT6_ALT
:
6058 case BFD_RELOC_XTENSA_SLOT7_ALT
:
6059 case BFD_RELOC_XTENSA_SLOT8_ALT
:
6060 case BFD_RELOC_XTENSA_SLOT9_ALT
:
6061 case BFD_RELOC_XTENSA_SLOT10_ALT
:
6062 case BFD_RELOC_XTENSA_SLOT11_ALT
:
6063 case BFD_RELOC_XTENSA_SLOT12_ALT
:
6064 case BFD_RELOC_XTENSA_SLOT13_ALT
:
6065 case BFD_RELOC_XTENSA_SLOT14_ALT
:
6066 /* These all need to be resolved at link-time. Do nothing now. */
6069 case BFD_RELOC_VTABLE_INHERIT
:
6070 case BFD_RELOC_VTABLE_ENTRY
:
6075 as_bad (_("unhandled local relocation fix %s"),
6076 bfd_get_reloc_code_name (fixP
->fx_r_type
));
6082 md_atof (int type
, char *litP
, int *sizeP
)
6084 return ieee_md_atof (type
, litP
, sizeP
, target_big_endian
);
6089 md_estimate_size_before_relax (fragS
*fragP
, segT seg ATTRIBUTE_UNUSED
)
6091 return total_frag_text_expansion (fragP
);
6095 /* Translate internal representation of relocation info to BFD target
6099 tc_gen_reloc (asection
*section ATTRIBUTE_UNUSED
, fixS
*fixp
)
6103 reloc
= XNEW (arelent
);
6104 reloc
->sym_ptr_ptr
= XNEW (asymbol
*);
6105 *reloc
->sym_ptr_ptr
= symbol_get_bfdsym (fixp
->fx_addsy
);
6106 reloc
->address
= fixp
->fx_frag
->fr_address
+ fixp
->fx_where
;
6108 /* Make sure none of our internal relocations make it this far.
6109 They'd better have been fully resolved by this point. */
6110 gas_assert ((int) fixp
->fx_r_type
> 0);
6112 reloc
->addend
= fixp
->fx_offset
;
6114 reloc
->howto
= bfd_reloc_type_lookup (stdoutput
, fixp
->fx_r_type
);
6115 if (reloc
->howto
== NULL
)
6117 as_bad_where (fixp
->fx_file
, fixp
->fx_line
,
6118 _("cannot represent `%s' relocation in object file"),
6119 bfd_get_reloc_code_name (fixp
->fx_r_type
));
6120 free (reloc
->sym_ptr_ptr
);
6125 if (!fixp
->fx_pcrel
!= !reloc
->howto
->pc_relative
)
6126 as_fatal (_("internal error; cannot generate `%s' relocation"),
6127 bfd_get_reloc_code_name (fixp
->fx_r_type
));
6133 /* Checks for resource conflicts between instructions. */
6135 /* The func unit stuff could be implemented as bit-vectors rather
6136 than the iterative approach here. If it ends up being too
6137 slow, we will switch it. */
6140 new_resource_table (void *data
,
6143 unit_num_copies_func uncf
,
6144 opcode_num_units_func onuf
,
6145 opcode_funcUnit_use_unit_func ouuf
,
6146 opcode_funcUnit_use_stage_func ousf
)
6149 resource_table
*rt
= XNEW (resource_table
);
6151 rt
->cycles
= cycles
;
6152 rt
->allocated_cycles
= cycles
;
6154 rt
->unit_num_copies
= uncf
;
6155 rt
->opcode_num_units
= onuf
;
6156 rt
->opcode_unit_use
= ouuf
;
6157 rt
->opcode_unit_stage
= ousf
;
6159 rt
->units
= XCNEWVEC (unsigned char *, cycles
);
6160 for (i
= 0; i
< cycles
; i
++)
6161 rt
->units
[i
] = XCNEWVEC (unsigned char, nu
);
6168 clear_resource_table (resource_table
*rt
)
6171 for (i
= 0; i
< rt
->allocated_cycles
; i
++)
6172 for (j
= 0; j
< rt
->num_units
; j
++)
6173 rt
->units
[i
][j
] = 0;
6177 /* We never shrink it, just fake it into thinking so. */
6180 resize_resource_table (resource_table
*rt
, int cycles
)
6184 rt
->cycles
= cycles
;
6185 if (cycles
<= rt
->allocated_cycles
)
6188 old_cycles
= rt
->allocated_cycles
;
6189 rt
->allocated_cycles
= cycles
;
6191 rt
->units
= XRESIZEVEC (unsigned char *, rt
->units
, rt
->allocated_cycles
);
6192 for (i
= 0; i
< old_cycles
; i
++)
6193 rt
->units
[i
] = XRESIZEVEC (unsigned char, rt
->units
[i
], rt
->num_units
);
6194 for (i
= old_cycles
; i
< cycles
; i
++)
6195 rt
->units
[i
] = XCNEWVEC (unsigned char, rt
->num_units
);
6200 resources_available (resource_table
*rt
, xtensa_opcode opcode
, int cycle
)
6203 int uses
= (rt
->opcode_num_units
) (rt
->data
, opcode
);
6205 for (i
= 0; i
< uses
; i
++)
6207 xtensa_funcUnit unit
= (rt
->opcode_unit_use
) (rt
->data
, opcode
, i
);
6208 int stage
= (rt
->opcode_unit_stage
) (rt
->data
, opcode
, i
);
6209 int copies_in_use
= rt
->units
[stage
+ cycle
][unit
];
6210 int copies
= (rt
->unit_num_copies
) (rt
->data
, unit
);
6211 if (copies_in_use
>= copies
)
6219 reserve_resources (resource_table
*rt
, xtensa_opcode opcode
, int cycle
)
6222 int uses
= (rt
->opcode_num_units
) (rt
->data
, opcode
);
6224 for (i
= 0; i
< uses
; i
++)
6226 xtensa_funcUnit unit
= (rt
->opcode_unit_use
) (rt
->data
, opcode
, i
);
6227 int stage
= (rt
->opcode_unit_stage
) (rt
->data
, opcode
, i
);
6228 /* Note that this allows resources to be oversubscribed. That's
6229 essential to the way the optional scheduler works.
6230 resources_available reports when a resource is over-subscribed,
6231 so it's easy to tell. */
6232 rt
->units
[stage
+ cycle
][unit
]++;
6238 release_resources (resource_table
*rt
, xtensa_opcode opcode
, int cycle
)
6241 int uses
= (rt
->opcode_num_units
) (rt
->data
, opcode
);
6243 for (i
= 0; i
< uses
; i
++)
6245 xtensa_funcUnit unit
= (rt
->opcode_unit_use
) (rt
->data
, opcode
, i
);
6246 int stage
= (rt
->opcode_unit_stage
) (rt
->data
, opcode
, i
);
6247 gas_assert (rt
->units
[stage
+ cycle
][unit
] > 0);
6248 rt
->units
[stage
+ cycle
][unit
]--;
6253 /* Wrapper functions make parameterized resource reservation
6257 opcode_funcUnit_use_unit (void *data
, xtensa_opcode opcode
, int idx
)
6259 xtensa_funcUnit_use
*use
= xtensa_opcode_funcUnit_use (data
, opcode
, idx
);
6265 opcode_funcUnit_use_stage (void *data
, xtensa_opcode opcode
, int idx
)
6267 xtensa_funcUnit_use
*use
= xtensa_opcode_funcUnit_use (data
, opcode
, idx
);
6272 /* Note that this function does not check issue constraints, but
6273 solely whether the hardware is available to execute the given
6274 instructions together. It also doesn't check if the tinsns
6275 write the same state, or access the same tieports. That is
6276 checked by check_t1_t2_reads_and_writes. */
6279 resources_conflict (vliw_insn
*vinsn
)
6282 static resource_table
*rt
= NULL
;
6284 /* This is the most common case by far. Optimize it. */
6285 if (vinsn
->num_slots
== 1)
6290 xtensa_isa isa
= xtensa_default_isa
;
6291 rt
= new_resource_table
6292 (isa
, xtensa_num_pipe_stages
,
6293 xtensa_isa_num_funcUnits (isa
),
6294 (unit_num_copies_func
) xtensa_funcUnit_num_copies
,
6295 (opcode_num_units_func
) xtensa_opcode_num_funcUnit_uses
,
6296 opcode_funcUnit_use_unit
,
6297 opcode_funcUnit_use_stage
);
6300 clear_resource_table (rt
);
6302 for (i
= 0; i
< vinsn
->num_slots
; i
++)
6304 if (!resources_available (rt
, vinsn
->slots
[i
].opcode
, 0))
6306 reserve_resources (rt
, vinsn
->slots
[i
].opcode
, 0);
6313 /* finish_vinsn, emit_single_op and helper functions. */
6315 static bfd_boolean
find_vinsn_conflicts (vliw_insn
*);
6316 static xtensa_format
xg_find_narrowest_format (vliw_insn
*);
6317 static void xg_assemble_vliw_tokens (vliw_insn
*);
6320 /* We have reached the end of a bundle; emit into the frag. */
6323 finish_vinsn (vliw_insn
*vinsn
)
6329 if (find_vinsn_conflicts (vinsn
))
6331 xg_clear_vinsn (vinsn
);
6335 /* First, find a format that works. */
6336 if (vinsn
->format
== XTENSA_UNDEFINED
)
6337 vinsn
->format
= xg_find_narrowest_format (vinsn
);
6339 slots
= xtensa_format_num_slots (xtensa_default_isa
, vinsn
->format
);
6341 && produce_flix
== FLIX_NONE
)
6343 as_bad (_("The option \"--no-allow-flix\" prohibits multi-slot flix."));
6344 xg_clear_vinsn (vinsn
);
6348 if (vinsn
->format
== XTENSA_UNDEFINED
)
6350 as_bad (_("couldn't find a valid instruction format"));
6351 fprintf (stderr
, _(" ops were: "));
6352 for (i
= 0; i
< vinsn
->num_slots
; i
++)
6353 fprintf (stderr
, _(" %s;"),
6354 xtensa_opcode_name (xtensa_default_isa
,
6355 vinsn
->slots
[i
].opcode
));
6356 fprintf (stderr
, _("\n"));
6357 xg_clear_vinsn (vinsn
);
6361 if (vinsn
->num_slots
!= slots
)
6363 as_bad (_("mismatch for format '%s': #slots = %d, #opcodes = %d"),
6364 xtensa_format_name (xtensa_default_isa
, vinsn
->format
),
6365 slots
, vinsn
->num_slots
);
6366 xg_clear_vinsn (vinsn
);
6370 if (resources_conflict (vinsn
))
6372 as_bad (_("illegal resource usage in bundle"));
6373 fprintf (stderr
, " ops were: ");
6374 for (i
= 0; i
< vinsn
->num_slots
; i
++)
6375 fprintf (stderr
, " %s;",
6376 xtensa_opcode_name (xtensa_default_isa
,
6377 vinsn
->slots
[i
].opcode
));
6378 fprintf (stderr
, "\n");
6379 xg_clear_vinsn (vinsn
);
6383 for (i
= 0; i
< vinsn
->num_slots
; i
++)
6385 if (vinsn
->slots
[i
].opcode
!= XTENSA_UNDEFINED
)
6387 symbolS
*lit_sym
= NULL
;
6389 bfd_boolean e
= FALSE
;
6390 bfd_boolean saved_density
= density_supported
;
6392 /* We don't want to narrow ops inside multi-slot bundles. */
6393 if (vinsn
->num_slots
> 1)
6394 density_supported
= FALSE
;
6396 istack_init (&slotstack
);
6397 if (vinsn
->slots
[i
].opcode
== xtensa_nop_opcode
)
6399 vinsn
->slots
[i
].opcode
=
6400 xtensa_format_slot_nop_opcode (xtensa_default_isa
,
6402 vinsn
->slots
[i
].ntok
= 0;
6405 if (xg_expand_assembly_insn (&slotstack
, &vinsn
->slots
[i
]))
6411 density_supported
= saved_density
;
6415 xg_clear_vinsn (vinsn
);
6419 for (j
= 0; j
< slotstack
.ninsn
; j
++)
6421 TInsn
*insn
= &slotstack
.insn
[j
];
6422 if (insn
->insn_type
== ITYPE_LITERAL
)
6424 gas_assert (lit_sym
== NULL
);
6425 lit_sym
= xg_assemble_literal (insn
);
6429 gas_assert (insn
->insn_type
== ITYPE_INSN
);
6431 xg_resolve_literals (insn
, lit_sym
);
6432 if (j
!= slotstack
.ninsn
- 1)
6433 emit_single_op (insn
);
6437 if (vinsn
->num_slots
> 1)
6439 if (opcode_fits_format_slot
6440 (slotstack
.insn
[slotstack
.ninsn
- 1].opcode
,
6443 vinsn
->slots
[i
] = slotstack
.insn
[slotstack
.ninsn
- 1];
6447 emit_single_op (&slotstack
.insn
[slotstack
.ninsn
- 1]);
6448 if (vinsn
->format
== XTENSA_UNDEFINED
)
6449 vinsn
->slots
[i
].opcode
= xtensa_nop_opcode
;
6451 vinsn
->slots
[i
].opcode
6452 = xtensa_format_slot_nop_opcode (xtensa_default_isa
,
6455 vinsn
->slots
[i
].ntok
= 0;
6460 vinsn
->slots
[0] = slotstack
.insn
[slotstack
.ninsn
- 1];
6461 vinsn
->format
= XTENSA_UNDEFINED
;
6466 /* Now check resource conflicts on the modified bundle. */
6467 if (resources_conflict (vinsn
))
6469 as_bad (_("illegal resource usage in bundle"));
6470 fprintf (stderr
, " ops were: ");
6471 for (i
= 0; i
< vinsn
->num_slots
; i
++)
6472 fprintf (stderr
, " %s;",
6473 xtensa_opcode_name (xtensa_default_isa
,
6474 vinsn
->slots
[i
].opcode
));
6475 fprintf (stderr
, "\n");
6476 xg_clear_vinsn (vinsn
);
6480 /* First, find a format that works. */
6481 if (vinsn
->format
== XTENSA_UNDEFINED
)
6482 vinsn
->format
= xg_find_narrowest_format (vinsn
);
6484 xg_assemble_vliw_tokens (vinsn
);
6486 xg_clear_vinsn (vinsn
);
6488 xtensa_check_frag_count ();
6492 /* Given an vliw instruction, what conflicts are there in register
6493 usage and in writes to states and queues?
6495 This function does two things:
6496 1. Reports an error when a vinsn contains illegal combinations
6497 of writes to registers states or queues.
6498 2. Marks individual tinsns as not relaxable if the combination
6499 contains antidependencies.
6501 Job 2 handles things like swap semantics in instructions that need
6502 to be relaxed. For example,
6506 normally would be relaxed to
6511 _but_, if the above instruction is bundled with an a0 reader, e.g.,
6513 { addi a0, a1, 10000 ; add a2, a0, a4 ; }
6515 then we can't relax it into
6518 { add a0, a1, a0 ; add a2, a0, a4 ; }
6520 because the value of a0 is trashed before the second add can read it. */
6522 static char check_t1_t2_reads_and_writes (TInsn
*, TInsn
*);
6525 find_vinsn_conflicts (vliw_insn
*vinsn
)
6529 xtensa_isa isa
= xtensa_default_isa
;
6531 gas_assert (!past_xtensa_end
);
6533 for (i
= 0 ; i
< vinsn
->num_slots
; i
++)
6535 TInsn
*op1
= &vinsn
->slots
[i
];
6536 if (op1
->is_specific_opcode
)
6537 op1
->keep_wide
= TRUE
;
6539 op1
->keep_wide
= FALSE
;
6542 for (i
= 0 ; i
< vinsn
->num_slots
; i
++)
6544 TInsn
*op1
= &vinsn
->slots
[i
];
6546 if (xtensa_opcode_is_branch (isa
, op1
->opcode
) == 1)
6549 for (j
= 0; j
< vinsn
->num_slots
; j
++)
6553 TInsn
*op2
= &vinsn
->slots
[j
];
6554 char conflict_type
= check_t1_t2_reads_and_writes (op1
, op2
);
6555 switch (conflict_type
)
6558 as_bad (_("opcodes '%s' (slot %d) and '%s' (slot %d) write the same register"),
6559 xtensa_opcode_name (isa
, op1
->opcode
), i
,
6560 xtensa_opcode_name (isa
, op2
->opcode
), j
);
6563 as_bad (_("opcodes '%s' (slot %d) and '%s' (slot %d) write the same state"),
6564 xtensa_opcode_name (isa
, op1
->opcode
), i
,
6565 xtensa_opcode_name (isa
, op2
->opcode
), j
);
6568 as_bad (_("opcodes '%s' (slot %d) and '%s' (slot %d) write the same port"),
6569 xtensa_opcode_name (isa
, op1
->opcode
), i
,
6570 xtensa_opcode_name (isa
, op2
->opcode
), j
);
6573 as_bad (_("opcodes '%s' (slot %d) and '%s' (slot %d) both have volatile port accesses"),
6574 xtensa_opcode_name (isa
, op1
->opcode
), i
,
6575 xtensa_opcode_name (isa
, op2
->opcode
), j
);
6578 /* Everything is OK. */
6581 op2
->is_specific_opcode
= (op2
->is_specific_opcode
6582 || conflict_type
== 'a');
6589 as_bad (_("multiple branches or jumps in the same bundle"));
6597 /* Check how the state used by t1 and t2 relate.
6600 case A: t1 reads a register t2 writes (an antidependency within a bundle)
6601 case B: no relationship between what is read and written (both could
6602 read the same reg though)
6603 case C: t1 writes a register t2 writes (a register conflict within a
6605 case D: t1 writes a state that t2 also writes
6606 case E: t1 writes a tie queue that t2 also writes
6607 case F: two volatile queue accesses
6611 check_t1_t2_reads_and_writes (TInsn
*t1
, TInsn
*t2
)
6613 xtensa_isa isa
= xtensa_default_isa
;
6614 xtensa_regfile t1_regfile
, t2_regfile
;
6616 int t1_base_reg
, t1_last_reg
;
6617 int t2_base_reg
, t2_last_reg
;
6618 char t1_inout
, t2_inout
;
6620 char conflict
= 'b';
6625 bfd_boolean t1_volatile
= FALSE
;
6626 bfd_boolean t2_volatile
= FALSE
;
6628 /* Check registers. */
6629 for (j
= 0; j
< t2
->ntok
; j
++)
6631 if (xtensa_operand_is_register (isa
, t2
->opcode
, j
) != 1)
6634 t2_regfile
= xtensa_operand_regfile (isa
, t2
->opcode
, j
);
6635 t2_base_reg
= t2
->tok
[j
].X_add_number
;
6636 t2_last_reg
= t2_base_reg
+ xtensa_operand_num_regs (isa
, t2
->opcode
, j
);
6638 for (i
= 0; i
< t1
->ntok
; i
++)
6640 if (xtensa_operand_is_register (isa
, t1
->opcode
, i
) != 1)
6643 t1_regfile
= xtensa_operand_regfile (isa
, t1
->opcode
, i
);
6645 if (t1_regfile
!= t2_regfile
)
6648 t1_inout
= xtensa_operand_inout (isa
, t1
->opcode
, i
);
6649 t2_inout
= xtensa_operand_inout (isa
, t2
->opcode
, j
);
6651 if (xtensa_operand_is_known_reg (isa
, t1
->opcode
, i
) == 0
6652 || xtensa_operand_is_known_reg (isa
, t2
->opcode
, j
) == 0)
6654 if (t1_inout
== 'm' || t1_inout
== 'o'
6655 || t2_inout
== 'm' || t2_inout
== 'o')
6662 t1_base_reg
= t1
->tok
[i
].X_add_number
;
6663 t1_last_reg
= (t1_base_reg
6664 + xtensa_operand_num_regs (isa
, t1
->opcode
, i
));
6666 for (t1_reg
= t1_base_reg
; t1_reg
< t1_last_reg
; t1_reg
++)
6668 for (t2_reg
= t2_base_reg
; t2_reg
< t2_last_reg
; t2_reg
++)
6670 if (t1_reg
!= t2_reg
)
6673 if (t2_inout
== 'i' && (t1_inout
== 'm' || t1_inout
== 'o'))
6679 if (t1_inout
== 'i' && (t2_inout
== 'm' || t2_inout
== 'o'))
6685 if (t1_inout
!= 'i' && t2_inout
!= 'i')
6693 t1_states
= xtensa_opcode_num_stateOperands (isa
, t1
->opcode
);
6694 t2_states
= xtensa_opcode_num_stateOperands (isa
, t2
->opcode
);
6695 for (j
= 0; j
< t2_states
; j
++)
6697 xtensa_state t2_so
= xtensa_stateOperand_state (isa
, t2
->opcode
, j
);
6698 t2_inout
= xtensa_stateOperand_inout (isa
, t2
->opcode
, j
);
6699 for (i
= 0; i
< t1_states
; i
++)
6701 xtensa_state t1_so
= xtensa_stateOperand_state (isa
, t1
->opcode
, i
);
6702 t1_inout
= xtensa_stateOperand_inout (isa
, t1
->opcode
, i
);
6703 if (t1_so
!= t2_so
|| xtensa_state_is_shared_or (isa
, t1_so
) == 1)
6706 if (t2_inout
== 'i' && (t1_inout
== 'm' || t1_inout
== 'o'))
6712 if (t1_inout
== 'i' && (t2_inout
== 'm' || t2_inout
== 'o'))
6718 if (t1_inout
!= 'i' && t2_inout
!= 'i')
6723 /* Check tieports. */
6724 t1_interfaces
= xtensa_opcode_num_interfaceOperands (isa
, t1
->opcode
);
6725 t2_interfaces
= xtensa_opcode_num_interfaceOperands (isa
, t2
->opcode
);
6726 for (j
= 0; j
< t2_interfaces
; j
++)
6728 xtensa_interface t2_int
6729 = xtensa_interfaceOperand_interface (isa
, t2
->opcode
, j
);
6730 int t2_class
= xtensa_interface_class_id (isa
, t2_int
);
6732 t2_inout
= xtensa_interface_inout (isa
, t2_int
);
6733 if (xtensa_interface_has_side_effect (isa
, t2_int
) == 1)
6736 for (i
= 0; i
< t1_interfaces
; i
++)
6738 xtensa_interface t1_int
6739 = xtensa_interfaceOperand_interface (isa
, t1
->opcode
, j
);
6740 int t1_class
= xtensa_interface_class_id (isa
, t1_int
);
6742 t1_inout
= xtensa_interface_inout (isa
, t1_int
);
6743 if (xtensa_interface_has_side_effect (isa
, t1_int
) == 1)
6746 if (t1_volatile
&& t2_volatile
&& (t1_class
== t2_class
))
6749 if (t1_int
!= t2_int
)
6752 if (t2_inout
== 'i' && t1_inout
== 'o')
6758 if (t1_inout
== 'i' && t2_inout
== 'o')
6764 if (t1_inout
!= 'i' && t2_inout
!= 'i')
6773 static xtensa_format
6774 xg_find_narrowest_format (vliw_insn
*vinsn
)
6776 /* Right now we assume that the ops within the vinsn are properly
6777 ordered for the slots that the programmer wanted them in. In
6778 other words, we don't rearrange the ops in hopes of finding a
6779 better format. The scheduler handles that. */
6781 xtensa_isa isa
= xtensa_default_isa
;
6782 xtensa_format format
;
6783 xtensa_opcode nop_opcode
= xtensa_nop_opcode
;
6785 if (vinsn
->num_slots
== 1)
6786 return xg_get_single_format (vinsn
->slots
[0].opcode
);
6788 for (format
= 0; format
< xtensa_isa_num_formats (isa
); format
++)
6791 xg_copy_vinsn (&v_copy
, vinsn
);
6792 if (xtensa_format_num_slots (isa
, format
) == v_copy
.num_slots
)
6796 for (slot
= 0; slot
< v_copy
.num_slots
; slot
++)
6798 if (v_copy
.slots
[slot
].opcode
== nop_opcode
)
6800 v_copy
.slots
[slot
].opcode
=
6801 xtensa_format_slot_nop_opcode (isa
, format
, slot
);
6802 v_copy
.slots
[slot
].ntok
= 0;
6805 if (opcode_fits_format_slot (v_copy
.slots
[slot
].opcode
,
6808 else if (v_copy
.num_slots
> 1)
6811 /* Try the widened version. */
6812 if (!v_copy
.slots
[slot
].keep_wide
6813 && !v_copy
.slots
[slot
].is_specific_opcode
6814 && xg_is_single_relaxable_insn (&v_copy
.slots
[slot
],
6816 && opcode_fits_format_slot (widened
.opcode
,
6819 v_copy
.slots
[slot
] = widened
;
6824 if (fit
== v_copy
.num_slots
)
6826 xg_copy_vinsn (vinsn
, &v_copy
);
6827 xtensa_format_encode (isa
, format
, vinsn
->insnbuf
);
6828 vinsn
->format
= format
;
6834 if (format
== xtensa_isa_num_formats (isa
))
6835 return XTENSA_UNDEFINED
;
6841 /* Return the additional space needed in a frag
6842 for possible relaxations of any ops in a VLIW insn.
6843 Also fill out the relaxations that might be required of
6844 each tinsn in the vinsn. */
6847 relaxation_requirements (vliw_insn
*vinsn
, bfd_boolean
*pfinish_frag
)
6849 bfd_boolean finish_frag
= FALSE
;
6850 int extra_space
= 0;
6853 for (slot
= 0; slot
< vinsn
->num_slots
; slot
++)
6855 TInsn
*tinsn
= &vinsn
->slots
[slot
];
6856 if (!tinsn_has_symbolic_operands (tinsn
))
6858 /* A narrow instruction could be widened later to help
6859 alignment issues. */
6860 if (xg_is_single_relaxable_insn (tinsn
, 0, TRUE
)
6861 && !tinsn
->is_specific_opcode
6862 && vinsn
->num_slots
== 1)
6864 /* Difference in bytes between narrow and wide insns... */
6866 tinsn
->subtype
= RELAX_NARROW
;
6871 if (workaround_b_j_loop_end
6872 && tinsn
->opcode
== xtensa_jx_opcode
6873 && use_transform ())
6875 /* Add 2 of these. */
6876 extra_space
+= 3; /* for the nop size */
6877 tinsn
->subtype
= RELAX_ADD_NOP_IF_PRE_LOOP_END
;
6880 /* Need to assemble it with space for the relocation. */
6881 if (xg_is_relaxable_insn (tinsn
, 0)
6882 && !tinsn
->is_specific_opcode
)
6884 int max_size
= xg_get_max_insn_widen_size (tinsn
->opcode
);
6885 int max_literal_size
=
6886 xg_get_max_insn_widen_literal_size (tinsn
->opcode
);
6888 tinsn
->literal_space
= max_literal_size
;
6890 tinsn
->subtype
= RELAX_IMMED
;
6891 extra_space
+= max_size
;
6895 /* A fix record will be added for this instruction prior
6896 to relaxation, so make it end the frag. */
6901 *pfinish_frag
= finish_frag
;
6907 bundle_tinsn (TInsn
*tinsn
, vliw_insn
*vinsn
)
6909 xtensa_isa isa
= xtensa_default_isa
;
6910 int slot
, chosen_slot
;
6912 vinsn
->format
= xg_get_single_format (tinsn
->opcode
);
6913 gas_assert (vinsn
->format
!= XTENSA_UNDEFINED
);
6914 vinsn
->num_slots
= xtensa_format_num_slots (isa
, vinsn
->format
);
6916 chosen_slot
= xg_get_single_slot (tinsn
->opcode
);
6917 for (slot
= 0; slot
< vinsn
->num_slots
; slot
++)
6919 if (slot
== chosen_slot
)
6920 vinsn
->slots
[slot
] = *tinsn
;
6923 vinsn
->slots
[slot
].opcode
=
6924 xtensa_format_slot_nop_opcode (isa
, vinsn
->format
, slot
);
6925 vinsn
->slots
[slot
].ntok
= 0;
6926 vinsn
->slots
[slot
].insn_type
= ITYPE_INSN
;
6933 emit_single_op (TInsn
*orig_insn
)
6936 IStack istack
; /* put instructions into here */
6937 symbolS
*lit_sym
= NULL
;
6938 symbolS
*label_sym
= NULL
;
6940 istack_init (&istack
);
6942 /* Special-case for "movi aX, foo" which is guaranteed to need relaxing.
6943 Because the scheduling and bundling characteristics of movi and
6944 l32r or const16 are so different, we can do much better if we relax
6945 it prior to scheduling and bundling, rather than after. */
6946 if ((orig_insn
->opcode
== xtensa_movi_opcode
6947 || orig_insn
->opcode
== xtensa_movi_n_opcode
)
6948 && !cur_vinsn
.inside_bundle
6949 && (orig_insn
->tok
[1].X_op
== O_symbol
6950 || orig_insn
->tok
[1].X_op
== O_pltrel
6951 || orig_insn
->tok
[1].X_op
== O_tlsfunc
6952 || orig_insn
->tok
[1].X_op
== O_tlsarg
6953 || orig_insn
->tok
[1].X_op
== O_tpoff
6954 || orig_insn
->tok
[1].X_op
== O_dtpoff
)
6955 && !orig_insn
->is_specific_opcode
&& use_transform ())
6956 xg_assembly_relax (&istack
, orig_insn
, now_seg
, frag_now
, 0, 1, 0);
6958 if (xg_expand_assembly_insn (&istack
, orig_insn
))
6961 for (i
= 0; i
< istack
.ninsn
; i
++)
6963 TInsn
*insn
= &istack
.insn
[i
];
6964 switch (insn
->insn_type
)
6967 gas_assert (lit_sym
== NULL
);
6968 lit_sym
= xg_assemble_literal (insn
);
6972 static int relaxed_sym_idx
= 0;
6973 char *label
= XNEWVEC (char, strlen (FAKE_LABEL_NAME
) + 12);
6974 sprintf (label
, "%s_rl_%x", FAKE_LABEL_NAME
, relaxed_sym_idx
++);
6976 gas_assert (label_sym
== NULL
);
6977 label_sym
= symbol_find_or_make (label
);
6978 gas_assert (label_sym
);
6986 xg_resolve_literals (insn
, lit_sym
);
6988 xg_resolve_labels (insn
, label_sym
);
6990 bundle_tinsn (insn
, &v
);
7005 total_frag_text_expansion (fragS
*fragP
)
7008 int total_expansion
= 0;
7010 for (slot
= 0; slot
< config_max_slots
; slot
++)
7011 total_expansion
+= fragP
->tc_frag_data
.text_expansion
[slot
];
7013 return total_expansion
;
7017 /* Emit a vliw instruction to the current fragment. */
7020 xg_assemble_vliw_tokens (vliw_insn
*vinsn
)
7022 bfd_boolean finish_frag
;
7023 bfd_boolean is_jump
= FALSE
;
7024 bfd_boolean is_branch
= FALSE
;
7025 xtensa_isa isa
= xtensa_default_isa
;
7030 struct dwarf2_line_info debug_line
;
7031 bfd_boolean loc_directive_seen
= FALSE
;
7034 memset (&debug_line
, 0, sizeof (struct dwarf2_line_info
));
7036 if (generating_literals
)
7038 static int reported
= 0;
7040 as_bad_where (frag_now
->fr_file
, frag_now
->fr_line
,
7041 _("cannot assemble into a literal fragment"));
7048 if (frag_now_fix () != 0
7049 && (! frag_now
->tc_frag_data
.is_insn
7050 || (vinsn_has_specific_opcodes (vinsn
) && use_transform ())
7051 || (!use_transform ()) != frag_now
->tc_frag_data
.is_no_transform
7052 || (directive_state
[directive_longcalls
]
7053 != frag_now
->tc_frag_data
.use_longcalls
)
7054 || (directive_state
[directive_absolute_literals
]
7055 != frag_now
->tc_frag_data
.use_absolute_literals
)))
7057 frag_wane (frag_now
);
7059 xtensa_set_frag_assembly_state (frag_now
);
7062 if (workaround_a0_b_retw
7063 && vinsn
->num_slots
== 1
7064 && (get_last_insn_flags (now_seg
, now_subseg
) & FLAG_IS_A0_WRITER
) != 0
7065 && xtensa_opcode_is_branch (isa
, vinsn
->slots
[0].opcode
) == 1
7066 && use_transform ())
7068 has_a0_b_retw
= TRUE
;
7070 /* Mark this fragment with the special RELAX_ADD_NOP_IF_A0_B_RETW.
7071 After the first assembly pass we will check all of them and
7072 add a nop if needed. */
7073 frag_now
->tc_frag_data
.is_insn
= TRUE
;
7074 frag_var (rs_machine_dependent
, 4, 4,
7075 RELAX_ADD_NOP_IF_A0_B_RETW
,
7076 frag_now
->fr_symbol
,
7077 frag_now
->fr_offset
,
7079 xtensa_set_frag_assembly_state (frag_now
);
7080 frag_now
->tc_frag_data
.is_insn
= TRUE
;
7081 frag_var (rs_machine_dependent
, 4, 4,
7082 RELAX_ADD_NOP_IF_A0_B_RETW
,
7083 frag_now
->fr_symbol
,
7084 frag_now
->fr_offset
,
7086 xtensa_set_frag_assembly_state (frag_now
);
7089 for (slot
= 0; slot
< vinsn
->num_slots
; slot
++)
7091 tinsn
= &vinsn
->slots
[slot
];
7093 /* See if the instruction implies an aligned section. */
7094 if (xtensa_opcode_is_loop (isa
, tinsn
->opcode
) == 1)
7095 record_alignment (now_seg
, 2);
7097 /* Determine the best line number for debug info. */
7098 if ((tinsn
->loc_directive_seen
|| !loc_directive_seen
)
7099 && (tinsn
->debug_line
.filenum
!= debug_line
.filenum
7100 || tinsn
->debug_line
.line
< debug_line
.line
7101 || tinsn
->debug_line
.column
< debug_line
.column
))
7102 debug_line
= tinsn
->debug_line
;
7103 if (tinsn
->loc_directive_seen
)
7104 loc_directive_seen
= TRUE
;
7107 /* Special cases for instructions that force an alignment... */
7108 /* None of these opcodes are bundle-able. */
7109 if (xtensa_opcode_is_loop (isa
, vinsn
->slots
[0].opcode
) == 1)
7113 /* Remember the symbol that marks the end of the loop in the frag
7114 that marks the start of the loop. This way we can easily find
7115 the end of the loop at the beginning, without adding special code
7116 to mark the loop instructions themselves. */
7117 symbolS
*target_sym
= NULL
;
7118 if (vinsn
->slots
[0].tok
[1].X_op
== O_symbol
)
7119 target_sym
= vinsn
->slots
[0].tok
[1].X_add_symbol
;
7121 xtensa_set_frag_assembly_state (frag_now
);
7122 frag_now
->tc_frag_data
.is_insn
= TRUE
;
7124 max_fill
= get_text_align_max_fill_size
7125 (get_text_align_power (xtensa_fetch_width
),
7126 TRUE
, frag_now
->tc_frag_data
.is_no_density
);
7128 if (use_transform ())
7129 frag_var (rs_machine_dependent
, max_fill
, max_fill
,
7130 RELAX_ALIGN_NEXT_OPCODE
, target_sym
, 0, NULL
);
7132 frag_var (rs_machine_dependent
, 0, 0,
7133 RELAX_CHECK_ALIGN_NEXT_OPCODE
, target_sym
, 0, NULL
);
7134 xtensa_set_frag_assembly_state (frag_now
);
7137 if (vinsn
->slots
[0].opcode
== xtensa_entry_opcode
7138 && !vinsn
->slots
[0].is_specific_opcode
)
7140 xtensa_mark_literal_pool_location ();
7141 xtensa_move_labels (frag_now
, 0);
7142 frag_var (rs_align_test
, 1, 1, 0, NULL
, 2, NULL
);
7145 if (vinsn
->num_slots
== 1)
7147 if (workaround_a0_b_retw
&& use_transform ())
7148 set_last_insn_flags (now_seg
, now_subseg
, FLAG_IS_A0_WRITER
,
7149 is_register_writer (&vinsn
->slots
[0], "a", 0));
7151 set_last_insn_flags (now_seg
, now_subseg
, FLAG_IS_BAD_LOOPEND
,
7152 is_bad_loopend_opcode (&vinsn
->slots
[0]));
7155 set_last_insn_flags (now_seg
, now_subseg
, FLAG_IS_BAD_LOOPEND
, FALSE
);
7157 insn_size
= xtensa_format_length (isa
, vinsn
->format
);
7159 extra_space
= relaxation_requirements (vinsn
, &finish_frag
);
7161 /* vinsn_to_insnbuf will produce the error. */
7162 if (vinsn
->format
!= XTENSA_UNDEFINED
)
7164 f
= frag_more (insn_size
+ extra_space
);
7165 xtensa_set_frag_assembly_state (frag_now
);
7166 frag_now
->tc_frag_data
.is_insn
= TRUE
;
7169 vinsn_to_insnbuf (vinsn
, f
, frag_now
, FALSE
);
7170 if (vinsn
->format
== XTENSA_UNDEFINED
)
7173 xtensa_insnbuf_to_chars (isa
, vinsn
->insnbuf
, (unsigned char *) f
, 0);
7175 if (debug_type
== DEBUG_DWARF2
|| loc_directive_seen
)
7176 dwarf2_gen_line_info (frag_now_fix () - (insn_size
+ extra_space
),
7179 for (slot
= 0; slot
< vinsn
->num_slots
; slot
++)
7181 tinsn
= &vinsn
->slots
[slot
];
7182 frag_now
->tc_frag_data
.slot_subtypes
[slot
] = tinsn
->subtype
;
7183 frag_now
->tc_frag_data
.slot_symbols
[slot
] = tinsn
->symbol
;
7184 frag_now
->tc_frag_data
.slot_offsets
[slot
] = tinsn
->offset
;
7185 frag_now
->tc_frag_data
.literal_frags
[slot
] = tinsn
->literal_frag
;
7186 if (tinsn
->opcode
== xtensa_l32r_opcode
)
7188 frag_now
->tc_frag_data
.literal_frags
[slot
] =
7189 tinsn
->tok
[1].X_add_symbol
->sy_frag
;
7191 if (tinsn
->literal_space
!= 0)
7192 xg_assemble_literal_space (tinsn
->literal_space
, slot
);
7193 frag_now
->tc_frag_data
.free_reg
[slot
] = tinsn
->extra_arg
;
7195 if (tinsn
->subtype
== RELAX_NARROW
)
7196 gas_assert (vinsn
->num_slots
== 1);
7197 if (xtensa_opcode_is_jump (isa
, tinsn
->opcode
) == 1)
7199 if (xtensa_opcode_is_branch (isa
, tinsn
->opcode
) == 1)
7202 if (tinsn
->subtype
|| tinsn
->symbol
|| tinsn
->offset
7203 || tinsn
->literal_frag
|| is_jump
|| is_branch
)
7207 if (vinsn_has_specific_opcodes (vinsn
) && use_transform ())
7208 frag_now
->tc_frag_data
.is_specific_opcode
= TRUE
;
7212 frag_variant (rs_machine_dependent
,
7213 extra_space
, extra_space
, RELAX_SLOTS
,
7214 frag_now
->fr_symbol
, frag_now
->fr_offset
, f
);
7215 xtensa_set_frag_assembly_state (frag_now
);
7218 /* Special cases for loops:
7219 close_loop_end should be inserted AFTER short_loop.
7220 Make sure that CLOSE loops are processed BEFORE short_loops
7221 when converting them. */
7223 /* "short_loop": Add a NOP if the loop is < 4 bytes. */
7224 if (xtensa_opcode_is_loop (isa
, vinsn
->slots
[0].opcode
) == 1
7225 && !vinsn
->slots
[0].is_specific_opcode
)
7227 if (workaround_short_loop
&& use_transform ())
7229 maybe_has_short_loop
= TRUE
;
7230 frag_now
->tc_frag_data
.is_insn
= TRUE
;
7231 frag_var (rs_machine_dependent
, 4, 4,
7232 RELAX_ADD_NOP_IF_SHORT_LOOP
,
7233 frag_now
->fr_symbol
, frag_now
->fr_offset
, NULL
);
7234 frag_now
->tc_frag_data
.is_insn
= TRUE
;
7235 frag_var (rs_machine_dependent
, 4, 4,
7236 RELAX_ADD_NOP_IF_SHORT_LOOP
,
7237 frag_now
->fr_symbol
, frag_now
->fr_offset
, NULL
);
7240 /* "close_loop_end": Add up to 12 bytes of NOPs to keep a
7241 loop at least 12 bytes away from another loop's end. */
7242 if (workaround_close_loop_end
&& use_transform ())
7244 maybe_has_close_loop_end
= TRUE
;
7245 frag_now
->tc_frag_data
.is_insn
= TRUE
;
7246 frag_var (rs_machine_dependent
, 12, 12,
7247 RELAX_ADD_NOP_IF_CLOSE_LOOP_END
,
7248 frag_now
->fr_symbol
, frag_now
->fr_offset
, NULL
);
7252 if (use_transform ())
7256 gas_assert (finish_frag
);
7257 frag_var (rs_machine_dependent
,
7258 xtensa_fetch_width
, xtensa_fetch_width
,
7260 frag_now
->fr_symbol
, frag_now
->fr_offset
, NULL
);
7261 xtensa_set_frag_assembly_state (frag_now
);
7262 xtensa_maybe_create_trampoline_frag ();
7263 /* Always create one here. */
7264 xtensa_maybe_create_literal_pool_frag (TRUE
, FALSE
);
7266 else if (is_branch
&& do_align_targets ())
7268 gas_assert (finish_frag
);
7269 frag_var (rs_machine_dependent
,
7270 xtensa_fetch_width
, xtensa_fetch_width
,
7271 RELAX_MAYBE_UNREACHABLE
,
7272 frag_now
->fr_symbol
, frag_now
->fr_offset
, NULL
);
7273 xtensa_set_frag_assembly_state (frag_now
);
7274 frag_var (rs_machine_dependent
,
7276 RELAX_MAYBE_DESIRE_ALIGN
,
7277 frag_now
->fr_symbol
, frag_now
->fr_offset
, NULL
);
7278 xtensa_set_frag_assembly_state (frag_now
);
7282 /* Now, if the original opcode was a call... */
7283 if (do_align_targets ()
7284 && xtensa_opcode_is_call (isa
, vinsn
->slots
[0].opcode
) == 1)
7286 float freq
= get_subseg_total_freq (now_seg
, now_subseg
);
7287 frag_now
->tc_frag_data
.is_insn
= TRUE
;
7288 frag_var (rs_machine_dependent
, 4, (int) freq
, RELAX_DESIRE_ALIGN
,
7289 frag_now
->fr_symbol
, frag_now
->fr_offset
, NULL
);
7290 xtensa_set_frag_assembly_state (frag_now
);
7293 if (vinsn_has_specific_opcodes (vinsn
) && use_transform ())
7295 frag_wane (frag_now
);
7297 xtensa_set_frag_assembly_state (frag_now
);
7302 /* xtensa_end and helper functions. */
7304 static void xtensa_cleanup_align_frags (void);
7305 static void xtensa_fix_target_frags (void);
7306 static void xtensa_mark_narrow_branches (void);
7307 static void xtensa_mark_zcl_first_insns (void);
7308 static void xtensa_mark_difference_of_two_symbols (void);
7309 static void xtensa_fix_a0_b_retw_frags (void);
7310 static void xtensa_fix_b_j_loop_end_frags (void);
7311 static void xtensa_fix_close_loop_end_frags (void);
7312 static void xtensa_fix_short_loop_frags (void);
7313 static void xtensa_sanity_check (void);
7314 static void xtensa_add_config_info (void);
7319 directive_balance ();
7320 xtensa_flush_pending_output ();
7322 past_xtensa_end
= TRUE
;
7324 xtensa_move_literals ();
7326 xtensa_reorder_segments ();
7327 xtensa_cleanup_align_frags ();
7328 xtensa_fix_target_frags ();
7329 if (workaround_a0_b_retw
&& has_a0_b_retw
)
7330 xtensa_fix_a0_b_retw_frags ();
7331 if (workaround_b_j_loop_end
)
7332 xtensa_fix_b_j_loop_end_frags ();
7334 /* "close_loop_end" should be processed BEFORE "short_loop". */
7335 if (workaround_close_loop_end
&& maybe_has_close_loop_end
)
7336 xtensa_fix_close_loop_end_frags ();
7338 if (workaround_short_loop
&& maybe_has_short_loop
)
7339 xtensa_fix_short_loop_frags ();
7341 xtensa_mark_narrow_branches ();
7342 xtensa_mark_zcl_first_insns ();
7344 xtensa_sanity_check ();
7346 xtensa_add_config_info ();
7348 xtensa_check_frag_count ();
7351 struct trampoline_chain_entry
7357 /* Trampoline chain for a given (sym, offset) pair is a sorted array
7358 of locations of trampoline jumps leading there. Jumps are represented
7359 as pairs (sym, offset): trampoline frag symbol and offset of the jump
7361 struct trampoline_chain
7363 struct trampoline_chain_entry target
;
7364 struct trampoline_chain_entry
*entry
;
7367 bfd_boolean needs_sorting
;
7370 struct trampoline_chain_index
7372 struct trampoline_chain
*entry
;
7375 bfd_boolean needs_sorting
;
7378 struct trampoline_index
7385 struct trampoline_seg
7387 struct trampoline_seg
*next
;
7389 /* Trampolines ordered by their frag fr_address */
7390 struct trampoline_index index
;
7391 /* Known trampoline chains ordered by (sym, offset) pair */
7392 struct trampoline_chain_index chain_index
;
7395 static struct trampoline_seg trampoline_seg_list
;
7396 #define J_RANGE (128 * 1024)
7397 #define J_MARGIN 4096
7399 static int unreachable_count
= 0;
7403 xtensa_maybe_create_trampoline_frag (void)
7405 if (!use_trampolines
)
7408 /* We create an area for possible trampolines every 10 unreachable frags.
7409 These are preferred over the ones not preceded by an unreachable frag,
7410 because we don't have to jump around them. This function is called after
7411 each RELAX_UNREACHABLE frag is created. */
7413 if (++unreachable_count
> 10)
7415 xtensa_create_trampoline_frag (FALSE
);
7416 clear_frag_count ();
7417 unreachable_count
= 0;
7422 xtensa_check_frag_count (void)
7424 if (!use_trampolines
|| frag_now
->tc_frag_data
.is_no_transform
)
7427 /* We create an area for possible trampolines every 8000 frags or so. This
7428 is an estimate based on the max range of a "j" insn (+/-128K) divided
7429 by a typical frag byte count (16), minus a few for safety. This function
7430 is called after each source line is processed. */
7432 if (get_frag_count () > 8000)
7434 xtensa_create_trampoline_frag (TRUE
);
7435 clear_frag_count ();
7436 unreachable_count
= 0;
7439 /* We create an area for a possible literal pool every N (default 5000)
7441 xtensa_maybe_create_literal_pool_frag (TRUE
, TRUE
);
7444 static xtensa_insnbuf trampoline_buf
= NULL
;
7445 static xtensa_insnbuf trampoline_slotbuf
= NULL
;
7447 static xtensa_insnbuf litpool_buf
= NULL
;
7448 static xtensa_insnbuf litpool_slotbuf
= NULL
;
7450 #define TRAMPOLINE_FRAG_SIZE 3000
7452 static struct trampoline_seg
*
7453 find_trampoline_seg (asection
*seg
)
7455 struct trampoline_seg
*ts
= trampoline_seg_list
.next
;
7456 static struct trampoline_seg
*mr
;
7458 if (mr
&& mr
->seg
== seg
)
7461 for ( ; ts
; ts
= ts
->next
)
7473 static size_t xg_find_trampoline (const struct trampoline_index
*idx
,
7477 size_t b
= idx
->n_entries
;
7481 size_t c
= (a
+ b
) / 2;
7483 if (idx
->entry
[c
]->fr_address
<= addr
)
7491 static void xg_add_trampoline_to_index (struct trampoline_index
*idx
,
7494 if (idx
->n_entries
== idx
->n_max
)
7496 idx
->n_max
= (idx
->n_entries
+ 1) * 2;
7497 idx
->entry
= xrealloc (idx
->entry
,
7498 sizeof (*idx
->entry
) * idx
->n_max
);
7500 idx
->entry
[idx
->n_entries
] = fragP
;
7504 static void xg_remove_trampoline_from_index (struct trampoline_index
*idx
,
7507 gas_assert (i
< idx
->n_entries
);
7508 memmove (idx
->entry
+ i
, idx
->entry
+ i
+ 1,
7509 (idx
->n_entries
- i
- 1) * sizeof (*idx
->entry
));
7513 static void xg_add_trampoline_to_seg (struct trampoline_seg
*ts
,
7516 xg_add_trampoline_to_index (&ts
->index
, fragP
);
7520 xtensa_create_trampoline_frag (bfd_boolean needs_jump_around
)
7522 /* Emit a frag where we can place intermediate jump instructions,
7523 in case we need to jump farther than 128K bytes.
7524 Each jump instruction takes three bytes.
7525 We allocate enough for 1000 trampolines in each frag.
7526 If that's not enough, oh well. */
7528 struct trampoline_seg
*ts
= find_trampoline_seg (now_seg
);
7531 int size
= TRAMPOLINE_FRAG_SIZE
;
7535 ts
= XCNEW(struct trampoline_seg
);
7536 ts
->next
= trampoline_seg_list
.next
;
7537 trampoline_seg_list
.next
= ts
;
7541 frag_wane (frag_now
);
7543 xtensa_set_frag_assembly_state (frag_now
);
7544 varP
= frag_var (rs_machine_dependent
, size
, size
, RELAX_TRAMPOLINE
, NULL
, 0, NULL
);
7545 fragP
= (fragS
*)(varP
- SIZEOF_STRUCT_FRAG
);
7546 if (trampoline_buf
== NULL
)
7548 trampoline_buf
= xtensa_insnbuf_alloc (xtensa_default_isa
);
7549 trampoline_slotbuf
= xtensa_insnbuf_alloc (xtensa_default_isa
);
7551 fragP
->tc_frag_data
.needs_jump_around
= needs_jump_around
;
7552 xg_add_trampoline_to_seg (ts
, fragP
);
7555 static bfd_boolean
xg_is_trampoline_frag_full (const fragS
*fragP
)
7557 return fragP
->fr_var
< 3;
7560 static int xg_order_trampoline_chain_entry (const void *a
, const void *b
)
7562 const struct trampoline_chain_entry
*pa
= a
;
7563 const struct trampoline_chain_entry
*pb
= b
;
7565 if (pa
->sym
== pb
->sym
||
7566 S_GET_VALUE (pa
->sym
) == S_GET_VALUE (pb
->sym
))
7567 if (pa
->offset
== pb
->offset
)
7570 return pa
->offset
< pb
->offset
? -1 : 1;
7572 return S_GET_VALUE (pa
->sym
) < S_GET_VALUE (pb
->sym
) ? -1 : 1;
7575 static void xg_sort_trampoline_chain (struct trampoline_chain
*tc
)
7577 qsort (tc
->entry
, tc
->n_entries
, sizeof (*tc
->entry
),
7578 xg_order_trampoline_chain_entry
);
7579 tc
->needs_sorting
= FALSE
;
7582 /* Find entry index in the given chain with maximal address <= source. */
7583 static size_t xg_find_chain_entry (struct trampoline_chain
*tc
,
7587 size_t b
= tc
->n_entries
;
7589 if (tc
->needs_sorting
)
7590 xg_sort_trampoline_chain (tc
);
7594 size_t c
= (a
+ b
) / 2;
7595 struct trampoline_chain_entry
*e
= tc
->entry
+ c
;
7597 if (S_GET_VALUE(e
->sym
) + e
->offset
<= source
)
7605 /* Find the best jump target for the source in the given trampoline chain.
7606 The best jump target is the one that results in the shortest path to the
7607 final target, it's the location of the jump closest to the final target,
7608 but within the J_RANGE - J_MARGIN from the source. */
7609 static struct trampoline_chain_entry
*
7610 xg_get_best_chain_entry (struct trampoline_chain
*tc
, addressT source
)
7612 addressT target
= S_GET_VALUE(tc
->target
.sym
) + tc
->target
.offset
;
7613 size_t i
= xg_find_chain_entry (tc
, source
);
7614 struct trampoline_chain_entry
*e
= tc
->entry
+ i
;
7615 int step
= target
< source
? -1 : 1;
7616 addressT chained_target
;
7619 if (target
> source
&&
7620 S_GET_VALUE(e
->sym
) + e
->offset
<= source
&&
7621 i
+ 1 < tc
->n_entries
)
7624 while (i
+ step
< tc
->n_entries
)
7626 struct trampoline_chain_entry
*next
= tc
->entry
+ i
+ step
;
7628 chained_target
= S_GET_VALUE(next
->sym
) + next
->offset
;
7629 off
= source
- chained_target
;
7631 if (labs (off
) >= J_RANGE
- J_MARGIN
)
7638 chained_target
= S_GET_VALUE(e
->sym
) + e
->offset
;
7639 off
= source
- chained_target
;
7641 if (labs (off
) < J_MARGIN
||
7642 labs (off
) >= J_RANGE
- J_MARGIN
)
7644 return tc
->entry
+ i
;
7647 static int xg_order_trampoline_chain (const void *a
, const void *b
)
7649 const struct trampoline_chain
*_pa
= a
;
7650 const struct trampoline_chain
*_pb
= b
;
7651 const struct trampoline_chain_entry
*pa
= &_pa
->target
;
7652 const struct trampoline_chain_entry
*pb
= &_pb
->target
;
7653 symbolS
*s1
= pa
->sym
;
7654 symbolS
*s2
= pb
->sym
;
7656 if (s1
->sy_flags
.sy_local_symbol
7657 && local_symbol_converted_p ((struct local_symbol
*) s1
))
7658 s1
= local_symbol_get_real_symbol ((struct local_symbol
*) s1
);
7660 if (s2
->sy_flags
.sy_local_symbol
7661 && local_symbol_converted_p ((struct local_symbol
*) s2
))
7662 s2
= local_symbol_get_real_symbol ((struct local_symbol
*) s2
);
7665 if (pa
->offset
== pb
->offset
)
7668 return pa
->offset
< pb
->offset
? -1 : 1;
7670 return s1
< s2
? -1 : 1;
7673 static struct trampoline_chain
*
7674 xg_get_trampoline_chain (struct trampoline_seg
*ts
,
7678 struct trampoline_chain_index
*idx
= &ts
->chain_index
;
7679 struct trampoline_chain c
;
7681 if (idx
->needs_sorting
)
7683 qsort (idx
->entry
, idx
->n_entries
, sizeof (*idx
->entry
),
7684 xg_order_trampoline_chain
);
7685 idx
->needs_sorting
= FALSE
;
7688 c
.target
.offset
= offset
;
7689 return bsearch (&c
, idx
->entry
, idx
->n_entries
,
7690 sizeof (struct trampoline_chain
),
7691 xg_order_trampoline_chain
);
7694 /* Find trampoline chain in the given trampoline segment that is going
7695 to the *sym + *offset. If found, replace *sym and *offset with the
7696 best jump target in that chain. */
7697 static struct trampoline_chain
*
7698 xg_find_best_eq_target (struct trampoline_seg
*ts
,
7699 addressT source
, symbolS
**sym
,
7702 struct trampoline_chain
*tc
= xg_get_trampoline_chain (ts
, *sym
, *offset
);
7706 struct trampoline_chain_entry
*e
= xg_get_best_chain_entry (tc
, source
);
7709 *offset
= e
->offset
;
7714 static void xg_add_location_to_chain (struct trampoline_chain
*tc
,
7715 symbolS
*sym
, addressT offset
)
7717 struct trampoline_chain_entry
*e
;
7719 if (tc
->n_entries
== tc
->n_max
)
7721 tc
->n_max
= (tc
->n_max
+ 1) * 2;
7722 tc
->entry
= xrealloc (tc
->entry
, sizeof (*tc
->entry
) * tc
->n_max
);
7724 e
= tc
->entry
+ tc
->n_entries
;
7728 tc
->needs_sorting
= TRUE
;
7731 static struct trampoline_chain
*
7732 xg_create_trampoline_chain (struct trampoline_seg
*ts
,
7733 symbolS
*sym
, addressT offset
)
7735 struct trampoline_chain_index
*idx
= &ts
->chain_index
;
7736 struct trampoline_chain
*tc
;
7738 if (idx
->n_entries
== idx
->n_max
)
7740 idx
->n_max
= (idx
->n_max
+ 1) * 2;
7741 idx
->entry
= xrealloc (idx
->entry
,
7742 sizeof (*idx
->entry
) * idx
->n_max
);
7745 tc
= idx
->entry
+ idx
->n_entries
;
7746 tc
->target
.sym
= sym
;
7747 tc
->target
.offset
= offset
;
7751 xg_add_location_to_chain (tc
, sym
, offset
);
7754 idx
->needs_sorting
= TRUE
;
7759 void dump_trampolines (void);
7762 dump_trampolines (void)
7764 struct trampoline_seg
*ts
= trampoline_seg_list
.next
;
7766 for ( ; ts
; ts
= ts
->next
)
7769 asection
*seg
= ts
->seg
;
7773 fprintf(stderr
, "SECTION %s\n", seg
->name
);
7775 for (i
= 0; i
< ts
->index
.n_entries
; ++i
)
7777 fragS
*tf
= ts
->index
.entry
[i
];
7779 fprintf(stderr
, " 0x%08x: fix=%d, jump_around=%s\n",
7780 (int)tf
->fr_address
, (int)tf
->fr_fix
,
7781 tf
->tc_frag_data
.needs_jump_around
? "T" : "F");
7786 static void dump_litpools (void) __attribute__ ((unused
));
7789 dump_litpools (void)
7791 struct litpool_seg
*lps
= litpool_seg_list
.next
;
7792 struct litpool_frag
*lpf
;
7794 for ( ; lps
; lps
= lps
->next
)
7796 printf("litpool seg %s\n", lps
->seg
->name
);
7797 for ( lpf
= lps
->frag_list
.next
; lpf
->fragP
; lpf
= lpf
->next
)
7799 fragS
*litfrag
= lpf
->fragP
->fr_next
;
7801 while (litfrag
&& litfrag
->fr_subtype
!= RELAX_LITERAL_POOL_END
)
7803 if (litfrag
->fr_fix
== 4)
7805 litfrag
= litfrag
->fr_next
;
7807 printf(" %ld <%d:%d> (%d) [%d]: ",
7808 lpf
->addr
, lpf
->priority
, lpf
->original_priority
,
7809 lpf
->fragP
->fr_line
, count
);
7810 //dump_frag(lpf->fragP);
7816 xtensa_maybe_create_literal_pool_frag (bfd_boolean create
,
7817 bfd_boolean only_if_needed
)
7819 struct litpool_seg
*lps
= litpool_seg_list
.next
;
7821 struct litpool_frag
*lpf
;
7822 bfd_boolean needed
= FALSE
;
7824 if (use_literal_section
|| !auto_litpools
)
7827 for ( ; lps
; lps
= lps
->next
)
7829 if (lps
->seg
== now_seg
)
7835 lps
= XCNEW (struct litpool_seg
);
7836 lps
->next
= litpool_seg_list
.next
;
7837 litpool_seg_list
.next
= lps
;
7839 lps
->frag_list
.next
= &lps
->frag_list
;
7840 lps
->frag_list
.prev
= &lps
->frag_list
;
7841 /* Put candidate literal pool at the beginning of every section,
7842 so that even when section starts with literal load there's a
7843 literal pool available. */
7844 lps
->frag_count
= auto_litpool_limit
;
7853 if (past_xtensa_end
|| !use_transform() ||
7854 frag_now
->tc_frag_data
.is_no_transform
)
7858 if (auto_litpool_limit
<= 0)
7860 /* Don't create a litpool based only on frag count. */
7863 else if (lps
->frag_count
> auto_litpool_limit
)
7880 int size
= (only_if_needed
) ? 3 : 0; /* Space for a "j" insn. */
7881 /* Create a potential site for a literal pool. */
7882 frag_wane (frag_now
);
7884 xtensa_set_frag_assembly_state (frag_now
);
7886 fragP
->tc_frag_data
.lit_frchain
= frchain_now
;
7887 fragP
->tc_frag_data
.literal_frag
= fragP
;
7888 frag_var (rs_machine_dependent
, size
, size
,
7890 RELAX_LITERAL_POOL_CANDIDATE_BEGIN
:
7891 RELAX_LITERAL_POOL_BEGIN
,
7893 frag_now
->tc_frag_data
.lit_seg
= now_seg
;
7894 frag_variant (rs_machine_dependent
, 0, 0,
7895 RELAX_LITERAL_POOL_END
, NULL
, 0, NULL
);
7896 xtensa_set_frag_assembly_state (frag_now
);
7900 /* RELAX_LITERAL_POOL_BEGIN frag is being created;
7901 just record it here. */
7905 lpf
= XNEW (struct litpool_frag
);
7906 /* Insert at tail of circular list. */
7908 lps
->frag_list
.prev
->next
= lpf
;
7909 lpf
->next
= &lps
->frag_list
;
7910 lpf
->prev
= lps
->frag_list
.prev
;
7911 lps
->frag_list
.prev
= lpf
;
7913 lpf
->priority
= (needed
) ? (only_if_needed
) ? 3 : 2 : 1;
7914 lpf
->original_priority
= lpf
->priority
;
7916 lps
->frag_count
= 0;
7920 xtensa_cleanup_align_frags (void)
7925 for (s
= stdoutput
->sections
; s
; s
= s
->next
)
7926 for (frchP
= seg_info (s
)->frchainP
; frchP
; frchP
= frchP
->frch_next
)
7929 /* Walk over all of the fragments in a subsection. */
7930 for (fragP
= frchP
->frch_root
; fragP
; fragP
= fragP
->fr_next
)
7932 if ((fragP
->fr_type
== rs_align
7933 || fragP
->fr_type
== rs_align_code
7934 || (fragP
->fr_type
== rs_machine_dependent
7935 && (fragP
->fr_subtype
== RELAX_DESIRE_ALIGN
7936 || fragP
->fr_subtype
== RELAX_DESIRE_ALIGN_IF_TARGET
)))
7937 && fragP
->fr_fix
== 0)
7939 fragS
*next
= fragP
->fr_next
;
7942 && next
->fr_fix
== 0
7943 && next
->fr_type
== rs_machine_dependent
7944 && next
->fr_subtype
== RELAX_DESIRE_ALIGN_IF_TARGET
)
7947 next
= next
->fr_next
;
7950 /* If we don't widen branch targets, then they
7951 will be easier to align. */
7952 if (fragP
->tc_frag_data
.is_branch_target
7953 && fragP
->fr_opcode
== fragP
->fr_literal
7954 && fragP
->fr_type
== rs_machine_dependent
7955 && fragP
->fr_subtype
== RELAX_SLOTS
7956 && fragP
->tc_frag_data
.slot_subtypes
[0] == RELAX_NARROW
)
7958 if (fragP
->fr_type
== rs_machine_dependent
7959 && fragP
->fr_subtype
== RELAX_UNREACHABLE
)
7960 fragP
->tc_frag_data
.is_unreachable
= TRUE
;
7966 /* Re-process all of the fragments looking to convert all of the
7967 RELAX_DESIRE_ALIGN_IF_TARGET fragments. If there is a branch
7968 target in the next fragment, convert this to RELAX_DESIRE_ALIGN.
7969 Otherwise, convert to a .fill 0. */
7972 xtensa_fix_target_frags (void)
7977 /* When this routine is called, all of the subsections are still intact
7978 so we walk over subsections instead of sections. */
7979 for (s
= stdoutput
->sections
; s
; s
= s
->next
)
7980 for (frchP
= seg_info (s
)->frchainP
; frchP
; frchP
= frchP
->frch_next
)
7984 /* Walk over all of the fragments in a subsection. */
7985 for (fragP
= frchP
->frch_root
; fragP
; fragP
= fragP
->fr_next
)
7987 if (fragP
->fr_type
== rs_machine_dependent
7988 && fragP
->fr_subtype
== RELAX_DESIRE_ALIGN_IF_TARGET
)
7990 if (next_frag_is_branch_target (fragP
))
7991 fragP
->fr_subtype
= RELAX_DESIRE_ALIGN
;
8000 static bfd_boolean
is_narrow_branch_guaranteed_in_range (fragS
*, TInsn
*);
8003 xtensa_mark_narrow_branches (void)
8008 for (s
= stdoutput
->sections
; s
; s
= s
->next
)
8009 for (frchP
= seg_info (s
)->frchainP
; frchP
; frchP
= frchP
->frch_next
)
8012 /* Walk over all of the fragments in a subsection. */
8013 for (fragP
= frchP
->frch_root
; fragP
; fragP
= fragP
->fr_next
)
8015 if (fragP
->fr_type
== rs_machine_dependent
8016 && fragP
->fr_subtype
== RELAX_SLOTS
8017 && fragP
->tc_frag_data
.slot_subtypes
[0] == RELAX_IMMED
)
8021 vinsn_from_chars (&vinsn
, fragP
->fr_opcode
);
8022 tinsn_immed_from_frag (&vinsn
.slots
[0], fragP
, 0);
8024 if (vinsn
.num_slots
== 1
8025 && xtensa_opcode_is_branch (xtensa_default_isa
,
8026 vinsn
.slots
[0].opcode
) == 1
8027 && xg_get_single_size (vinsn
.slots
[0].opcode
) == 2
8028 && is_narrow_branch_guaranteed_in_range (fragP
,
8031 fragP
->fr_subtype
= RELAX_SLOTS
;
8032 fragP
->tc_frag_data
.slot_subtypes
[0] = RELAX_NARROW
;
8033 fragP
->tc_frag_data
.is_aligning_branch
= 1;
8041 /* A branch is typically widened only when its target is out of
8042 range. However, we would like to widen them to align a subsequent
8043 branch target when possible.
8045 Because the branch relaxation code is so convoluted, the optimal solution
8046 (combining the two cases) is difficult to get right in all circumstances.
8047 We therefore go with an "almost as good" solution, where we only
8048 use for alignment narrow branches that definitely will not expand to a
8049 jump and a branch. These functions find and mark these cases. */
8051 /* The range in bytes of BNEZ.N and BEQZ.N. The target operand is encoded
8052 as PC + 4 + imm6, where imm6 is a 6-bit immediate ranging from 0 to 63.
8053 We start counting beginning with the frag after the 2-byte branch, so the
8054 maximum offset is (4 - 2) + 63 = 65. */
8055 #define MAX_IMMED6 65
8057 static offsetT
unrelaxed_frag_max_size (fragS
*);
8060 is_narrow_branch_guaranteed_in_range (fragS
*fragP
, TInsn
*tinsn
)
8062 const expressionS
*exp
= &tinsn
->tok
[1];
8063 symbolS
*symbolP
= exp
->X_add_symbol
;
8064 offsetT max_distance
= exp
->X_add_number
;
8067 if (exp
->X_op
!= O_symbol
)
8070 target_frag
= symbol_get_frag (symbolP
);
8072 max_distance
+= (S_GET_VALUE (symbolP
) - target_frag
->fr_address
);
8073 if (is_branch_jmp_to_next (tinsn
, fragP
))
8076 /* The branch doesn't branch over it's own frag,
8077 but over the subsequent ones. */
8078 fragP
= fragP
->fr_next
;
8079 while (fragP
!= NULL
&& fragP
!= target_frag
&& max_distance
<= MAX_IMMED6
)
8081 max_distance
+= unrelaxed_frag_max_size (fragP
);
8082 fragP
= fragP
->fr_next
;
8084 if (max_distance
<= MAX_IMMED6
&& fragP
== target_frag
)
8091 xtensa_mark_zcl_first_insns (void)
8096 for (s
= stdoutput
->sections
; s
; s
= s
->next
)
8097 for (frchP
= seg_info (s
)->frchainP
; frchP
; frchP
= frchP
->frch_next
)
8100 /* Walk over all of the fragments in a subsection. */
8101 for (fragP
= frchP
->frch_root
; fragP
; fragP
= fragP
->fr_next
)
8103 if (fragP
->fr_type
== rs_machine_dependent
8104 && (fragP
->fr_subtype
== RELAX_ALIGN_NEXT_OPCODE
8105 || fragP
->fr_subtype
== RELAX_CHECK_ALIGN_NEXT_OPCODE
))
8107 /* Find the loop frag. */
8108 fragS
*loop_frag
= next_non_empty_frag (fragP
);
8109 /* Find the first insn frag. */
8110 fragS
*targ_frag
= next_non_empty_frag (loop_frag
);
8112 /* Handle a corner case that comes up in hardware
8113 diagnostics. The original assembly looks like this:
8116 <empty_frag>--not found by next_non_empty_frag
8119 Depending on the start address, the assembler may or
8120 may not change it to look something like this:
8123 nop--frag isn't empty anymore
8126 So set up to check the alignment of the nop if it
8128 while (loop_frag
!= targ_frag
)
8130 if (loop_frag
->fr_type
== rs_machine_dependent
8131 && (loop_frag
->fr_subtype
== RELAX_ALIGN_NEXT_OPCODE
8132 || loop_frag
->fr_subtype
8133 == RELAX_CHECK_ALIGN_NEXT_OPCODE
))
8134 targ_frag
= loop_frag
;
8136 loop_frag
= loop_frag
->fr_next
;
8139 /* Of course, sometimes (mostly for toy test cases) a
8140 zero-cost loop instruction is the last in a section. */
8143 targ_frag
->tc_frag_data
.is_first_loop_insn
= TRUE
;
8144 /* Do not widen a frag that is the first instruction of a
8145 zero-cost loop. It makes that loop harder to align. */
8146 if (targ_frag
->fr_type
== rs_machine_dependent
8147 && targ_frag
->fr_subtype
== RELAX_SLOTS
8148 && (targ_frag
->tc_frag_data
.slot_subtypes
[0]
8151 if (targ_frag
->tc_frag_data
.is_aligning_branch
)
8152 targ_frag
->tc_frag_data
.slot_subtypes
[0] = RELAX_IMMED
;
8155 frag_wane (targ_frag
);
8156 targ_frag
->tc_frag_data
.slot_subtypes
[0] = 0;
8160 if (fragP
->fr_subtype
== RELAX_CHECK_ALIGN_NEXT_OPCODE
)
8168 /* When a difference-of-symbols expression is encoded as a uleb128 or
8169 sleb128 value, the linker is unable to adjust that value to account for
8170 link-time relaxation. Mark all the code between such symbols so that
8171 its size cannot be changed by linker relaxation. */
8174 xtensa_mark_difference_of_two_symbols (void)
8178 for (expr_sym
= expr_symbols
; expr_sym
;
8179 expr_sym
= symbol_get_tc (expr_sym
)->next_expr_symbol
)
8181 expressionS
*exp
= symbol_get_value_expression (expr_sym
);
8183 if (exp
->X_op
== O_subtract
)
8185 symbolS
*left
= exp
->X_add_symbol
;
8186 symbolS
*right
= exp
->X_op_symbol
;
8188 /* Difference of two symbols not in the same section
8189 are handled with relocations in the linker. */
8190 if (S_GET_SEGMENT (left
) == S_GET_SEGMENT (right
))
8196 if (symbol_get_frag (left
)->fr_address
8197 <= symbol_get_frag (right
)->fr_address
)
8199 start
= symbol_get_frag (left
);
8200 end
= symbol_get_frag (right
);
8204 start
= symbol_get_frag (right
);
8205 end
= symbol_get_frag (left
);
8208 if (start
->tc_frag_data
.no_transform_end
!= NULL
)
8209 walk
= start
->tc_frag_data
.no_transform_end
;
8214 walk
->tc_frag_data
.is_no_transform
= 1;
8215 walk
= walk
->fr_next
;
8217 while (walk
&& walk
->fr_address
< end
->fr_address
);
8219 start
->tc_frag_data
.no_transform_end
= walk
;
8226 /* Re-process all of the fragments looking to convert all of the
8227 RELAX_ADD_NOP_IF_A0_B_RETW. If the next instruction is a
8228 conditional branch or a retw/retw.n, convert this frag to one that
8229 will generate a NOP. In any case close it off with a .fill 0. */
8231 static bfd_boolean
next_instrs_are_b_retw (fragS
*);
8234 xtensa_fix_a0_b_retw_frags (void)
8239 /* When this routine is called, all of the subsections are still intact
8240 so we walk over subsections instead of sections. */
8241 for (s
= stdoutput
->sections
; s
; s
= s
->next
)
8242 for (frchP
= seg_info (s
)->frchainP
; frchP
; frchP
= frchP
->frch_next
)
8246 /* Walk over all of the fragments in a subsection. */
8247 for (fragP
= frchP
->frch_root
; fragP
; fragP
= fragP
->fr_next
)
8249 if (fragP
->fr_type
== rs_machine_dependent
8250 && fragP
->fr_subtype
== RELAX_ADD_NOP_IF_A0_B_RETW
)
8252 if (next_instrs_are_b_retw (fragP
))
8254 if (fragP
->tc_frag_data
.is_no_transform
)
8255 as_bad (_("instruction sequence (write a0, branch, retw) may trigger hardware errata"));
8257 relax_frag_add_nop (fragP
);
8267 next_instrs_are_b_retw (fragS
*fragP
)
8269 xtensa_opcode opcode
;
8271 const fragS
*next_fragP
= next_non_empty_frag (fragP
);
8272 static xtensa_insnbuf insnbuf
= NULL
;
8273 static xtensa_insnbuf slotbuf
= NULL
;
8274 xtensa_isa isa
= xtensa_default_isa
;
8277 bfd_boolean branch_seen
= FALSE
;
8281 insnbuf
= xtensa_insnbuf_alloc (isa
);
8282 slotbuf
= xtensa_insnbuf_alloc (isa
);
8285 if (next_fragP
== NULL
)
8288 /* Check for the conditional branch. */
8289 xtensa_insnbuf_from_chars
8290 (isa
, insnbuf
, (unsigned char *) &next_fragP
->fr_literal
[offset
], 0);
8291 fmt
= xtensa_format_decode (isa
, insnbuf
);
8292 if (fmt
== XTENSA_UNDEFINED
)
8295 for (slot
= 0; slot
< xtensa_format_num_slots (isa
, fmt
); slot
++)
8297 xtensa_format_get_slot (isa
, fmt
, slot
, insnbuf
, slotbuf
);
8298 opcode
= xtensa_opcode_decode (isa
, fmt
, slot
, slotbuf
);
8300 branch_seen
= (branch_seen
8301 || xtensa_opcode_is_branch (isa
, opcode
) == 1);
8307 offset
+= xtensa_format_length (isa
, fmt
);
8308 if (offset
== next_fragP
->fr_fix
)
8310 next_fragP
= next_non_empty_frag (next_fragP
);
8314 if (next_fragP
== NULL
)
8317 /* Check for the retw/retw.n. */
8318 xtensa_insnbuf_from_chars
8319 (isa
, insnbuf
, (unsigned char *) &next_fragP
->fr_literal
[offset
], 0);
8320 fmt
= xtensa_format_decode (isa
, insnbuf
);
8322 /* Because RETW[.N] is not bundleable, a VLIW bundle here means that we
8323 have no problems. */
8324 if (fmt
== XTENSA_UNDEFINED
8325 || xtensa_format_num_slots (isa
, fmt
) != 1)
8328 xtensa_format_get_slot (isa
, fmt
, 0, insnbuf
, slotbuf
);
8329 opcode
= xtensa_opcode_decode (isa
, fmt
, 0, slotbuf
);
8331 if (opcode
== xtensa_retw_opcode
|| opcode
== xtensa_retw_n_opcode
)
8338 /* Re-process all of the fragments looking to convert all of the
8339 RELAX_ADD_NOP_IF_PRE_LOOP_END. If there is one instruction and a
8340 loop end label, convert this frag to one that will generate a NOP.
8341 In any case close it off with a .fill 0. */
8343 static bfd_boolean
next_instr_is_loop_end (fragS
*);
8346 xtensa_fix_b_j_loop_end_frags (void)
8351 /* When this routine is called, all of the subsections are still intact
8352 so we walk over subsections instead of sections. */
8353 for (s
= stdoutput
->sections
; s
; s
= s
->next
)
8354 for (frchP
= seg_info (s
)->frchainP
; frchP
; frchP
= frchP
->frch_next
)
8358 /* Walk over all of the fragments in a subsection. */
8359 for (fragP
= frchP
->frch_root
; fragP
; fragP
= fragP
->fr_next
)
8361 if (fragP
->fr_type
== rs_machine_dependent
8362 && fragP
->fr_subtype
== RELAX_ADD_NOP_IF_PRE_LOOP_END
)
8364 if (next_instr_is_loop_end (fragP
))
8366 if (fragP
->tc_frag_data
.is_no_transform
)
8367 as_bad (_("branching or jumping to a loop end may trigger hardware errata"));
8369 relax_frag_add_nop (fragP
);
8379 next_instr_is_loop_end (fragS
*fragP
)
8381 const fragS
*next_fragP
;
8383 if (next_frag_is_loop_target (fragP
))
8386 next_fragP
= next_non_empty_frag (fragP
);
8387 if (next_fragP
== NULL
)
8390 if (!next_frag_is_loop_target (next_fragP
))
8393 /* If the size is >= 3 then there is more than one instruction here.
8394 The hardware bug will not fire. */
8395 if (next_fragP
->fr_fix
> 3)
8402 /* Re-process all of the fragments looking to convert all of the
8403 RELAX_ADD_NOP_IF_CLOSE_LOOP_END. If there is an loop end that is
8404 not MY loop's loop end within 12 bytes, add enough nops here to
8405 make it at least 12 bytes away. In any case close it off with a
8408 static offsetT min_bytes_to_other_loop_end
8409 (fragS
*, fragS
*, offsetT
);
8412 xtensa_fix_close_loop_end_frags (void)
8417 /* When this routine is called, all of the subsections are still intact
8418 so we walk over subsections instead of sections. */
8419 for (s
= stdoutput
->sections
; s
; s
= s
->next
)
8420 for (frchP
= seg_info (s
)->frchainP
; frchP
; frchP
= frchP
->frch_next
)
8424 fragS
*current_target
= NULL
;
8426 /* Walk over all of the fragments in a subsection. */
8427 for (fragP
= frchP
->frch_root
; fragP
; fragP
= fragP
->fr_next
)
8429 if (fragP
->fr_type
== rs_machine_dependent
8430 && ((fragP
->fr_subtype
== RELAX_ALIGN_NEXT_OPCODE
)
8431 || (fragP
->fr_subtype
== RELAX_CHECK_ALIGN_NEXT_OPCODE
)))
8432 current_target
= symbol_get_frag (fragP
->fr_symbol
);
8435 && fragP
->fr_type
== rs_machine_dependent
8436 && fragP
->fr_subtype
== RELAX_ADD_NOP_IF_CLOSE_LOOP_END
)
8439 int bytes_added
= 0;
8441 #define REQUIRED_LOOP_DIVIDING_BYTES 12
8442 /* Max out at 12. */
8443 min_bytes
= min_bytes_to_other_loop_end
8444 (fragP
->fr_next
, current_target
, REQUIRED_LOOP_DIVIDING_BYTES
);
8446 if (min_bytes
< REQUIRED_LOOP_DIVIDING_BYTES
)
8448 if (fragP
->tc_frag_data
.is_no_transform
)
8449 as_bad (_("loop end too close to another loop end may trigger hardware errata"));
8452 while (min_bytes
+ bytes_added
8453 < REQUIRED_LOOP_DIVIDING_BYTES
)
8457 if (fragP
->fr_var
< length
)
8458 as_fatal (_("fr_var %lu < length %d"),
8459 (long) fragP
->fr_var
, length
);
8462 assemble_nop (length
,
8463 fragP
->fr_literal
+ fragP
->fr_fix
);
8464 fragP
->fr_fix
+= length
;
8465 fragP
->fr_var
-= length
;
8467 bytes_added
+= length
;
8473 gas_assert (fragP
->fr_type
!= rs_machine_dependent
8474 || fragP
->fr_subtype
!= RELAX_ADD_NOP_IF_CLOSE_LOOP_END
);
8480 static offsetT
unrelaxed_frag_min_size (fragS
*);
8483 min_bytes_to_other_loop_end (fragS
*fragP
,
8484 fragS
*current_target
,
8488 fragS
*current_fragP
;
8490 for (current_fragP
= fragP
;
8492 current_fragP
= current_fragP
->fr_next
)
8494 if (current_fragP
->tc_frag_data
.is_loop_target
8495 && current_fragP
!= current_target
)
8498 offset
+= unrelaxed_frag_min_size (current_fragP
);
8500 if (offset
>= max_size
)
8508 unrelaxed_frag_min_size (fragS
*fragP
)
8510 offsetT size
= fragP
->fr_fix
;
8512 /* Add fill size. */
8513 if (fragP
->fr_type
== rs_fill
)
8514 size
+= fragP
->fr_offset
;
8521 unrelaxed_frag_max_size (fragS
*fragP
)
8523 offsetT size
= fragP
->fr_fix
;
8524 switch (fragP
->fr_type
)
8527 /* Empty frags created by the obstack allocation scheme
8528 end up with type 0. */
8533 size
+= fragP
->fr_offset
;
8541 /* No further adjustments needed. */
8543 case rs_machine_dependent
:
8544 if (fragP
->fr_subtype
!= RELAX_DESIRE_ALIGN
)
8545 size
+= fragP
->fr_var
;
8548 /* We had darn well better know how big it is. */
8557 /* Re-process all of the fragments looking to convert all
8558 of the RELAX_ADD_NOP_IF_SHORT_LOOP. If:
8561 1) the instruction size count to the loop end label
8562 is too short (<= 2 instructions),
8563 2) loop has a jump or branch in it
8566 1) workaround_all_short_loops is TRUE
8567 2) The generating loop was a 'loopgtz' or 'loopnez'
8568 3) the instruction size count to the loop end label is too short
8570 then convert this frag (and maybe the next one) to generate a NOP.
8571 In any case close it off with a .fill 0. */
8573 static int count_insns_to_loop_end (fragS
*, bfd_boolean
, int);
8574 static bfd_boolean
branch_before_loop_end (fragS
*);
8577 xtensa_fix_short_loop_frags (void)
8582 /* When this routine is called, all of the subsections are still intact
8583 so we walk over subsections instead of sections. */
8584 for (s
= stdoutput
->sections
; s
; s
= s
->next
)
8585 for (frchP
= seg_info (s
)->frchainP
; frchP
; frchP
= frchP
->frch_next
)
8588 xtensa_opcode current_opcode
= XTENSA_UNDEFINED
;
8590 /* Walk over all of the fragments in a subsection. */
8591 for (fragP
= frchP
->frch_root
; fragP
; fragP
= fragP
->fr_next
)
8593 if (fragP
->fr_type
== rs_machine_dependent
8594 && ((fragP
->fr_subtype
== RELAX_ALIGN_NEXT_OPCODE
)
8595 || (fragP
->fr_subtype
== RELAX_CHECK_ALIGN_NEXT_OPCODE
)))
8598 fragS
*loop_frag
= next_non_empty_frag (fragP
);
8599 tinsn_from_chars (&t_insn
, loop_frag
->fr_opcode
, 0);
8600 current_opcode
= t_insn
.opcode
;
8601 gas_assert (xtensa_opcode_is_loop (xtensa_default_isa
,
8602 current_opcode
) == 1);
8605 if (fragP
->fr_type
== rs_machine_dependent
8606 && fragP
->fr_subtype
== RELAX_ADD_NOP_IF_SHORT_LOOP
)
8608 if (count_insns_to_loop_end (fragP
->fr_next
, TRUE
, 3) < 3
8609 && (branch_before_loop_end (fragP
->fr_next
)
8610 || (workaround_all_short_loops
8611 && current_opcode
!= XTENSA_UNDEFINED
8612 && current_opcode
!= xtensa_loop_opcode
)))
8614 if (fragP
->tc_frag_data
.is_no_transform
)
8615 as_bad (_("loop containing less than three instructions may trigger hardware errata"));
8617 relax_frag_add_nop (fragP
);
8626 static int unrelaxed_frag_min_insn_count (fragS
*);
8629 count_insns_to_loop_end (fragS
*base_fragP
,
8630 bfd_boolean count_relax_add
,
8633 fragS
*fragP
= NULL
;
8638 for (; fragP
&& !fragP
->tc_frag_data
.is_loop_target
; fragP
= fragP
->fr_next
)
8640 insn_count
+= unrelaxed_frag_min_insn_count (fragP
);
8641 if (insn_count
>= max_count
)
8644 if (count_relax_add
)
8646 if (fragP
->fr_type
== rs_machine_dependent
8647 && fragP
->fr_subtype
== RELAX_ADD_NOP_IF_SHORT_LOOP
)
8649 /* In order to add the appropriate number of
8650 NOPs, we count an instruction for downstream
8653 if (insn_count
>= max_count
)
8663 unrelaxed_frag_min_insn_count (fragS
*fragP
)
8665 xtensa_isa isa
= xtensa_default_isa
;
8666 static xtensa_insnbuf insnbuf
= NULL
;
8670 if (!fragP
->tc_frag_data
.is_insn
)
8674 insnbuf
= xtensa_insnbuf_alloc (isa
);
8676 /* Decode the fixed instructions. */
8677 while (offset
< fragP
->fr_fix
)
8681 xtensa_insnbuf_from_chars
8682 (isa
, insnbuf
, (unsigned char *) fragP
->fr_literal
+ offset
, 0);
8683 fmt
= xtensa_format_decode (isa
, insnbuf
);
8685 if (fmt
== XTENSA_UNDEFINED
)
8687 as_fatal (_("undecodable instruction in instruction frag"));
8690 offset
+= xtensa_format_length (isa
, fmt
);
8698 static bfd_boolean
unrelaxed_frag_has_b_j (fragS
*);
8701 branch_before_loop_end (fragS
*base_fragP
)
8705 for (fragP
= base_fragP
;
8706 fragP
&& !fragP
->tc_frag_data
.is_loop_target
;
8707 fragP
= fragP
->fr_next
)
8709 if (unrelaxed_frag_has_b_j (fragP
))
8717 unrelaxed_frag_has_b_j (fragS
*fragP
)
8719 static xtensa_insnbuf insnbuf
= NULL
;
8720 xtensa_isa isa
= xtensa_default_isa
;
8723 if (!fragP
->tc_frag_data
.is_insn
)
8727 insnbuf
= xtensa_insnbuf_alloc (isa
);
8729 /* Decode the fixed instructions. */
8730 while (offset
< fragP
->fr_fix
)
8735 xtensa_insnbuf_from_chars
8736 (isa
, insnbuf
, (unsigned char *) fragP
->fr_literal
+ offset
, 0);
8737 fmt
= xtensa_format_decode (isa
, insnbuf
);
8738 if (fmt
== XTENSA_UNDEFINED
)
8741 for (slot
= 0; slot
< xtensa_format_num_slots (isa
, fmt
); slot
++)
8743 xtensa_opcode opcode
=
8744 get_opcode_from_buf (fragP
->fr_literal
+ offset
, slot
);
8745 if (xtensa_opcode_is_branch (isa
, opcode
) == 1
8746 || xtensa_opcode_is_jump (isa
, opcode
) == 1)
8749 offset
+= xtensa_format_length (isa
, fmt
);
8755 /* Checks to be made after initial assembly but before relaxation. */
8757 static bfd_boolean
is_empty_loop (const TInsn
*, fragS
*);
8758 static bfd_boolean
is_local_forward_loop (const TInsn
*, fragS
*);
8761 xtensa_sanity_check (void)
8763 const char *file_name
;
8768 file_name
= as_where (&line
);
8769 for (s
= stdoutput
->sections
; s
; s
= s
->next
)
8770 for (frchP
= seg_info (s
)->frchainP
; frchP
; frchP
= frchP
->frch_next
)
8774 /* Walk over all of the fragments in a subsection. */
8775 for (fragP
= frchP
->frch_root
; fragP
; fragP
= fragP
->fr_next
)
8777 if (fragP
->fr_type
== rs_machine_dependent
8778 && fragP
->fr_subtype
== RELAX_SLOTS
8779 && fragP
->tc_frag_data
.slot_subtypes
[0] == RELAX_IMMED
)
8781 static xtensa_insnbuf insnbuf
= NULL
;
8784 if (fragP
->fr_opcode
!= NULL
)
8787 insnbuf
= xtensa_insnbuf_alloc (xtensa_default_isa
);
8788 tinsn_from_chars (&t_insn
, fragP
->fr_opcode
, 0);
8789 tinsn_immed_from_frag (&t_insn
, fragP
, 0);
8791 if (xtensa_opcode_is_loop (xtensa_default_isa
,
8792 t_insn
.opcode
) == 1)
8794 if (is_empty_loop (&t_insn
, fragP
))
8796 new_logical_line (fragP
->fr_file
, fragP
->fr_line
);
8797 as_bad (_("invalid empty loop"));
8799 if (!is_local_forward_loop (&t_insn
, fragP
))
8801 new_logical_line (fragP
->fr_file
, fragP
->fr_line
);
8802 as_bad (_("loop target does not follow "
8803 "loop instruction in section"));
8810 new_logical_line (file_name
, line
);
8814 #define LOOP_IMMED_OPN 1
8816 /* Return TRUE if the loop target is the next non-zero fragment. */
8819 is_empty_loop (const TInsn
*insn
, fragS
*fragP
)
8821 const expressionS
*exp
;
8825 if (insn
->insn_type
!= ITYPE_INSN
)
8828 if (xtensa_opcode_is_loop (xtensa_default_isa
, insn
->opcode
) != 1)
8831 if (insn
->ntok
<= LOOP_IMMED_OPN
)
8834 exp
= &insn
->tok
[LOOP_IMMED_OPN
];
8836 if (exp
->X_op
!= O_symbol
)
8839 symbolP
= exp
->X_add_symbol
;
8843 if (symbol_get_frag (symbolP
) == NULL
)
8846 if (S_GET_VALUE (symbolP
) != 0)
8849 /* Walk through the zero-size fragments from this one. If we find
8850 the target fragment, then this is a zero-size loop. */
8852 for (next_fragP
= fragP
->fr_next
;
8854 next_fragP
= next_fragP
->fr_next
)
8856 if (next_fragP
== symbol_get_frag (symbolP
))
8858 if (next_fragP
->fr_fix
!= 0)
8866 is_local_forward_loop (const TInsn
*insn
, fragS
*fragP
)
8868 const expressionS
*exp
;
8872 if (insn
->insn_type
!= ITYPE_INSN
)
8875 if (xtensa_opcode_is_loop (xtensa_default_isa
, insn
->opcode
) != 1)
8878 if (insn
->ntok
<= LOOP_IMMED_OPN
)
8881 exp
= &insn
->tok
[LOOP_IMMED_OPN
];
8883 if (exp
->X_op
!= O_symbol
)
8886 symbolP
= exp
->X_add_symbol
;
8890 if (symbol_get_frag (symbolP
) == NULL
)
8893 /* Walk through fragments until we find the target.
8894 If we do not find the target, then this is an invalid loop. */
8896 for (next_fragP
= fragP
->fr_next
;
8898 next_fragP
= next_fragP
->fr_next
)
8900 if (next_fragP
== symbol_get_frag (symbolP
))
8908 #define XTINFO_NAME "Xtensa_Info"
8909 #define XTINFO_NAMESZ 12
8910 #define XTINFO_TYPE 1
8913 xtensa_add_config_info (void)
8919 info_sec
= subseg_new (".xtensa.info", 0);
8920 bfd_set_section_flags (stdoutput
, info_sec
, SEC_HAS_CONTENTS
| SEC_READONLY
);
8922 data
= XNEWVEC (char, 100);
8923 sprintf (data
, "USE_ABSOLUTE_LITERALS=%d\nABI=%d\n",
8924 XSHAL_USE_ABSOLUTE_LITERALS
, XSHAL_ABI
);
8925 sz
= strlen (data
) + 1;
8927 /* Add enough null terminators to pad to a word boundary. */
8930 while ((sz
& 3) != 0);
8932 /* Follow the standard note section layout:
8933 First write the length of the name string. */
8935 md_number_to_chars (p
, (valueT
) XTINFO_NAMESZ
, 4);
8937 /* Next comes the length of the "descriptor", i.e., the actual data. */
8939 md_number_to_chars (p
, (valueT
) sz
, 4);
8941 /* Write the note type. */
8943 md_number_to_chars (p
, (valueT
) XTINFO_TYPE
, 4);
8945 /* Write the name field. */
8946 p
= frag_more (XTINFO_NAMESZ
);
8947 memcpy (p
, XTINFO_NAME
, XTINFO_NAMESZ
);
8949 /* Finally, write the descriptor. */
8951 memcpy (p
, data
, sz
);
8957 /* Alignment Functions. */
8960 get_text_align_power (unsigned target_size
)
8962 if (target_size
<= 4)
8965 if (target_size
<= 8)
8968 if (target_size
<= 16)
8971 if (target_size
<= 32)
8974 if (target_size
<= 64)
8977 if (target_size
<= 128)
8980 if (target_size
<= 256)
8983 if (target_size
<= 512)
8986 if (target_size
<= 1024)
8995 get_text_align_max_fill_size (int align_pow
,
8996 bfd_boolean use_nops
,
8997 bfd_boolean use_no_density
)
9000 return (1 << align_pow
);
9002 return 3 * (1 << align_pow
);
9004 return 1 + (1 << align_pow
);
9008 /* Calculate the minimum bytes of fill needed at "address" to align a
9009 target instruction of size "target_size" so that it does not cross a
9010 power-of-two boundary specified by "align_pow". If "use_nops" is FALSE,
9011 the fill can be an arbitrary number of bytes. Otherwise, the space must
9012 be filled by NOP instructions. */
9015 get_text_align_fill_size (addressT address
,
9018 bfd_boolean use_nops
,
9019 bfd_boolean use_no_density
)
9021 addressT alignment
, fill
, fill_limit
, fill_step
;
9022 bfd_boolean skip_one
= FALSE
;
9024 alignment
= (1 << align_pow
);
9025 gas_assert (target_size
> 0 && alignment
>= (addressT
) target_size
);
9029 fill_limit
= alignment
;
9032 else if (!use_no_density
)
9034 /* Combine 2- and 3-byte NOPs to fill anything larger than one. */
9035 fill_limit
= alignment
* 2;
9041 /* Fill with 3-byte NOPs -- can only fill multiples of 3. */
9042 fill_limit
= alignment
* 3;
9046 /* Try all fill sizes until finding one that works. */
9047 for (fill
= 0; fill
< fill_limit
; fill
+= fill_step
)
9049 if (skip_one
&& fill
== 1)
9051 if ((address
+ fill
) >> align_pow
9052 == (address
+ fill
+ target_size
- 1) >> align_pow
)
9061 branch_align_power (segT sec
)
9063 /* If the Xtensa processor has a fetch width of X, and
9064 the section is aligned to at least that boundary, then a branch
9065 target need only fit within that aligned block of memory to avoid
9066 a stall. Otherwise, try to fit branch targets within 4-byte
9067 aligned blocks (which may be insufficient, e.g., if the section
9068 has no alignment, but it's good enough). */
9069 int fetch_align
= get_text_align_power(xtensa_fetch_width
);
9070 int sec_align
= get_recorded_alignment (sec
);
9072 if (sec_align
>= fetch_align
)
9079 /* This will assert if it is not possible. */
9082 get_text_align_nop_count (offsetT fill_size
, bfd_boolean use_no_density
)
9088 gas_assert (fill_size
% 3 == 0);
9089 return (fill_size
/ 3);
9092 gas_assert (fill_size
!= 1); /* Bad argument. */
9094 while (fill_size
> 1)
9097 if (fill_size
== 2 || fill_size
== 4)
9099 fill_size
-= insn_size
;
9102 gas_assert (fill_size
!= 1); /* Bad algorithm. */
9108 get_text_align_nth_nop_size (offsetT fill_size
,
9110 bfd_boolean use_no_density
)
9117 gas_assert (fill_size
!= 1); /* Bad argument. */
9119 while (fill_size
> 1)
9122 if (fill_size
== 2 || fill_size
== 4)
9124 fill_size
-= insn_size
;
9134 /* For the given fragment, find the appropriate address
9135 for it to begin at if we are using NOPs to align it. */
9138 get_noop_aligned_address (fragS
*fragP
, addressT address
)
9140 /* The rule is: get next fragment's FIRST instruction. Find
9141 the smallest number of bytes that need to be added to
9142 ensure that the next fragment's FIRST instruction will fit
9145 E.G., 2 bytes : 0, 1, 2 mod 4
9148 If the FIRST instruction MIGHT be relaxed,
9149 assume that it will become a 3-byte instruction.
9151 Note again here that LOOP instructions are not bundleable,
9152 and this relaxation only applies to LOOP opcodes. */
9155 int first_insn_size
;
9157 addressT pre_opcode_bytes
;
9160 xtensa_opcode opcode
;
9161 bfd_boolean is_loop
;
9163 gas_assert (fragP
->fr_type
== rs_machine_dependent
);
9164 gas_assert (fragP
->fr_subtype
== RELAX_ALIGN_NEXT_OPCODE
);
9166 /* Find the loop frag. */
9167 first_insn
= next_non_empty_frag (fragP
);
9168 /* Now find the first insn frag. */
9169 first_insn
= next_non_empty_frag (first_insn
);
9171 is_loop
= next_frag_opcode_is_loop (fragP
, &opcode
);
9172 gas_assert (is_loop
);
9173 loop_insn_size
= xg_get_single_size (opcode
);
9175 pre_opcode_bytes
= next_frag_pre_opcode_bytes (fragP
);
9176 pre_opcode_bytes
+= loop_insn_size
;
9178 /* For loops, the alignment depends on the size of the
9179 instruction following the loop, not the LOOP instruction. */
9181 if (first_insn
== NULL
)
9182 first_insn_size
= xtensa_fetch_width
;
9184 first_insn_size
= get_loop_align_size (frag_format_size (first_insn
));
9186 /* If it was 8, then we'll need a larger alignment for the section. */
9187 align_power
= get_text_align_power (first_insn_size
);
9188 record_alignment (now_seg
, align_power
);
9190 fill_size
= get_text_align_fill_size
9191 (address
+ pre_opcode_bytes
, align_power
, first_insn_size
, TRUE
,
9192 fragP
->tc_frag_data
.is_no_density
);
9194 return address
+ fill_size
;
9198 /* 3 mechanisms for relaxing an alignment:
9200 Align to a power of 2.
9201 Align so the next fragment's instruction does not cross a word boundary.
9202 Align the current instruction so that if the next instruction
9203 were 3 bytes, it would not cross a word boundary.
9207 zeros - This is easy; always insert zeros.
9208 nops - 3-byte and 2-byte instructions
9212 >=5 : 3-byte instruction + fn (n-3)
9213 widening - widen previous instructions. */
9216 get_aligned_diff (fragS
*fragP
, addressT address
, offsetT
*max_diff
)
9218 addressT target_address
, loop_insn_offset
;
9220 xtensa_opcode loop_opcode
;
9221 bfd_boolean is_loop
;
9224 offsetT branch_align
;
9227 gas_assert (fragP
->fr_type
== rs_machine_dependent
);
9228 switch (fragP
->fr_subtype
)
9230 case RELAX_DESIRE_ALIGN
:
9231 target_size
= next_frag_format_size (fragP
);
9232 if (target_size
== XTENSA_UNDEFINED
)
9234 align_power
= branch_align_power (now_seg
);
9235 branch_align
= 1 << align_power
;
9236 /* Don't count on the section alignment being as large as the target. */
9237 if (target_size
> branch_align
)
9238 target_size
= branch_align
;
9239 opt_diff
= get_text_align_fill_size (address
, align_power
,
9240 target_size
, FALSE
, FALSE
);
9242 *max_diff
= (opt_diff
+ branch_align
9243 - (target_size
+ ((address
+ opt_diff
) % branch_align
)));
9244 gas_assert (*max_diff
>= opt_diff
);
9247 case RELAX_ALIGN_NEXT_OPCODE
:
9248 /* The next non-empty frag after this one holds the LOOP instruction
9249 that needs to be aligned. The required alignment depends on the
9250 size of the next non-empty frag after the loop frag, i.e., the
9251 first instruction in the loop. */
9252 loop_frag
= next_non_empty_frag (fragP
);
9253 target_size
= get_loop_align_size (next_frag_format_size (loop_frag
));
9254 loop_insn_offset
= 0;
9255 is_loop
= next_frag_opcode_is_loop (fragP
, &loop_opcode
);
9256 gas_assert (is_loop
);
9258 /* If the loop has been expanded then the LOOP instruction
9259 could be at an offset from this fragment. */
9260 if (loop_frag
->tc_frag_data
.slot_subtypes
[0] != RELAX_IMMED
)
9261 loop_insn_offset
= get_expanded_loop_offset (loop_opcode
);
9263 /* In an ideal world, which is what we are shooting for here,
9264 we wouldn't need to use any NOPs immediately prior to the
9265 LOOP instruction. If this approach fails, relax_frag_loop_align
9266 will call get_noop_aligned_address. */
9268 address
+ loop_insn_offset
+ xg_get_single_size (loop_opcode
);
9269 align_power
= get_text_align_power (target_size
);
9270 opt_diff
= get_text_align_fill_size (target_address
, align_power
,
9271 target_size
, FALSE
, FALSE
);
9273 *max_diff
= xtensa_fetch_width
9274 - ((target_address
+ opt_diff
) % xtensa_fetch_width
)
9275 - target_size
+ opt_diff
;
9276 gas_assert (*max_diff
>= opt_diff
);
9287 /* md_relax_frag Hook and Helper Functions. */
9289 static long relax_frag_loop_align (fragS
*, long);
9290 static long relax_frag_for_align (fragS
*, long);
9291 static long relax_frag_immed
9292 (segT
, fragS
*, long, int, xtensa_format
, int, int *, bfd_boolean
);
9294 /* Get projected address for the first fulcrum on a path from source to
9296 static addressT
xg_get_fulcrum (addressT source
, addressT target
)
9298 offsetT delta
= target
- source
;
9301 n
= (labs (delta
) + J_RANGE
- J_MARGIN
- 1) / (J_RANGE
- J_MARGIN
);
9302 return source
+ delta
/ n
;
9305 /* Given trampoline index, source and target of a jump find the best
9306 candidate trampoline for the first fulcrum. The best trampoline is
9307 the one in the reach of "j' instruction from the source, closest to
9308 the projected fulcrum address, and preferrably w/o a jump around or
9309 with already initialized jump around. */
9310 static size_t xg_find_best_trampoline (struct trampoline_index
*idx
,
9311 addressT source
, addressT target
)
9313 addressT fulcrum
= xg_get_fulcrum (source
, target
);
9316 size_t base_tr
= xg_find_trampoline (idx
, fulcrum
);
9319 /* Check trampoline frags around the base_tr to find the best. */
9320 for (dist
= 0; checked
; ++dist
)
9323 size_t tr
= base_tr
- dist
;
9327 /* Trampolines are checked in the following order:
9328 base_tr, base_tr + 1, base_tr - 1, base_tr + 2, base_tr - 2 */
9329 for (i
= 0; i
< 2; ++i
, tr
= base_tr
+ dist
+ 1)
9330 if (tr
< idx
->n_entries
)
9332 fragS
*trampoline_frag
= idx
->entry
[tr
];
9335 /* Don't check trampolines outside source - target interval. */
9336 if ((trampoline_frag
->fr_address
< source
&&
9337 trampoline_frag
->fr_address
< target
) ||
9338 (trampoline_frag
->fr_address
> source
&&
9339 trampoline_frag
->fr_address
> target
))
9342 off
= trampoline_frag
->fr_address
- fulcrum
;
9343 /* Stop if some trampoline is found and the search is more than
9344 J_RANGE / 4 from the projected fulcrum. A trampoline w/o jump
9345 around is nice, but it shouldn't have much overhead. */
9346 if (best
< idx
->n_entries
&& labs (off
) > J_RANGE
/ 4)
9349 off
= trampoline_frag
->fr_address
- source
;
9350 if (labs (off
) < J_RANGE
- J_MARGIN
)
9353 /* Stop if a trampoline w/o jump around is found or initialized
9354 trampoline with jump around is found. */
9355 if (!trampoline_frag
->tc_frag_data
.needs_jump_around
||
9356 trampoline_frag
->fr_fix
)
9358 else if (best
>= idx
->n_entries
)
9364 if (best
< idx
->n_entries
)
9367 as_fatal (_("cannot find suitable trampoline"));
9370 static fixS
*xg_relax_fixup (struct trampoline_index
*idx
, fixS
*fixP
)
9372 symbolS
*s
= fixP
->fx_addsy
;
9373 addressT source
= fixP
->fx_frag
->fr_address
;
9374 addressT target
= S_GET_VALUE (s
) + fixP
->fx_offset
;
9375 size_t tr
= xg_find_best_trampoline (idx
, source
, target
);
9376 fragS
*trampoline_frag
= idx
->entry
[tr
];
9379 init_trampoline_frag (trampoline_frag
);
9380 newfixP
= xg_append_jump (trampoline_frag
,
9381 fixP
->fx_addsy
, fixP
->fx_offset
);
9383 /* Adjust the fixup for the original "j" instruction to
9384 point to the newly added jump. */
9385 fixP
->fx_addsy
= trampoline_frag
->fr_symbol
;
9386 fixP
->fx_offset
= trampoline_frag
->fr_fix
- 3;
9387 fixP
->tc_fix_data
.X_add_symbol
= trampoline_frag
->fr_symbol
;
9388 fixP
->tc_fix_data
.X_add_number
= trampoline_frag
->fr_fix
- 3;
9390 trampoline_frag
->tc_frag_data
.relax_seen
= FALSE
;
9392 if (xg_is_trampoline_frag_full (trampoline_frag
))
9393 xg_remove_trampoline_from_index (idx
, tr
);
9398 static bfd_boolean
xg_is_relaxable_fixup (fixS
*fixP
)
9400 xtensa_isa isa
= xtensa_default_isa
;
9401 addressT addr
= fixP
->fx_frag
->fr_address
;
9404 symbolS
*s
= fixP
->fx_addsy
;
9407 xtensa_opcode opcode
;
9409 if (fixP
->fx_r_type
< BFD_RELOC_XTENSA_SLOT0_OP
||
9410 fixP
->fx_r_type
> BFD_RELOC_XTENSA_SLOT14_OP
)
9413 target
= S_GET_VALUE (s
) + fixP
->fx_offset
;
9414 delta
= target
- addr
;
9416 if (labs (delta
) < J_RANGE
- J_MARGIN
)
9419 xtensa_insnbuf_from_chars (isa
, trampoline_buf
,
9420 (unsigned char *) fixP
->fx_frag
->fr_literal
+
9422 fmt
= xtensa_format_decode (isa
, trampoline_buf
);
9423 gas_assert (fmt
!= XTENSA_UNDEFINED
);
9424 slot
= fixP
->tc_fix_data
.slot
;
9425 xtensa_format_get_slot (isa
, fmt
, slot
, trampoline_buf
, trampoline_slotbuf
);
9426 opcode
= xtensa_opcode_decode (isa
, fmt
, slot
, trampoline_slotbuf
);
9427 return opcode
== xtensa_j_opcode
;
9430 static void xg_relax_fixups (struct trampoline_seg
*ts
)
9432 struct trampoline_index
*idx
= &ts
->index
;
9433 segment_info_type
*seginfo
= seg_info (now_seg
);
9436 for (fx
= seginfo
->fix_root
; fx
; fx
= fx
->fx_next
)
9439 struct trampoline_chain
*tc
= NULL
;
9441 if (xg_is_relaxable_fixup (fixP
))
9443 tc
= xg_find_best_eq_target (ts
, fixP
->fx_frag
->fr_address
,
9444 &fixP
->fx_addsy
, &fixP
->fx_offset
);
9446 tc
= xg_create_trampoline_chain (ts
, fixP
->fx_addsy
,
9451 while (xg_is_relaxable_fixup (fixP
))
9453 fixP
= xg_relax_fixup (idx
, fixP
);
9454 xg_add_location_to_chain (tc
, fixP
->fx_frag
->fr_symbol
,
9460 /* Given a trampoline frag relax all jumps that might want to use this
9461 trampoline. Only do real work once per relaxation cycle, when
9462 xg_relax_trampoline is called for the first trampoline in the now_seg.
9463 Don't use stretch, don't update new_stretch: place fulcrums with a
9464 slack to tolerate code movement. In the worst case if a jump between
9465 two trampolines wouldn't reach the next relaxation pass will fix it. */
9466 static void xg_relax_trampoline (fragS
*fragP
, long stretch ATTRIBUTE_UNUSED
,
9467 long *new_stretch ATTRIBUTE_UNUSED
)
9469 struct trampoline_seg
*ts
= find_trampoline_seg (now_seg
);
9471 if (ts
->index
.n_entries
&& ts
->index
.entry
[0] == fragP
)
9472 xg_relax_fixups (ts
);
9475 /* Return the number of bytes added to this fragment, given that the
9476 input has been stretched already by "stretch". */
9479 xtensa_relax_frag (fragS
*fragP
, long stretch
, int *stretched_p
)
9481 xtensa_isa isa
= xtensa_default_isa
;
9482 int unreported
= fragP
->tc_frag_data
.unreported_expansion
;
9483 long new_stretch
= 0;
9484 const char *file_name
;
9487 static xtensa_insnbuf vbuf
= NULL
;
9488 int slot
, num_slots
;
9491 file_name
= as_where (&line
);
9492 new_logical_line (fragP
->fr_file
, fragP
->fr_line
);
9494 fragP
->tc_frag_data
.unreported_expansion
= 0;
9496 switch (fragP
->fr_subtype
)
9498 case RELAX_ALIGN_NEXT_OPCODE
:
9499 /* Always convert. */
9500 if (fragP
->tc_frag_data
.relax_seen
)
9501 new_stretch
= relax_frag_loop_align (fragP
, stretch
);
9504 case RELAX_LOOP_END
:
9508 case RELAX_LOOP_END_ADD_NOP
:
9509 /* Add a NOP and switch to .fill 0. */
9510 new_stretch
= relax_frag_add_nop (fragP
);
9514 case RELAX_DESIRE_ALIGN
:
9515 /* Do nothing. The narrowing before this frag will either align
9520 case RELAX_LITERAL_FINAL
:
9523 case RELAX_LITERAL_NR
:
9525 fragP
->fr_subtype
= RELAX_LITERAL_FINAL
;
9526 gas_assert (unreported
== lit_size
);
9527 memset (&fragP
->fr_literal
[fragP
->fr_fix
], 0, 4);
9528 fragP
->fr_var
-= lit_size
;
9529 fragP
->fr_fix
+= lit_size
;
9535 vbuf
= xtensa_insnbuf_alloc (isa
);
9537 xtensa_insnbuf_from_chars
9538 (isa
, vbuf
, (unsigned char *) fragP
->fr_opcode
, 0);
9539 fmt
= xtensa_format_decode (isa
, vbuf
);
9540 num_slots
= xtensa_format_num_slots (isa
, fmt
);
9542 for (slot
= 0; slot
< num_slots
; slot
++)
9544 switch (fragP
->tc_frag_data
.slot_subtypes
[slot
])
9547 if (fragP
->tc_frag_data
.relax_seen
)
9548 new_stretch
+= relax_frag_for_align (fragP
, stretch
);
9552 case RELAX_IMMED_STEP1
:
9553 case RELAX_IMMED_STEP2
:
9554 case RELAX_IMMED_STEP3
:
9555 /* Place the immediate. */
9556 new_stretch
+= relax_frag_immed
9557 (now_seg
, fragP
, stretch
,
9558 fragP
->tc_frag_data
.slot_subtypes
[slot
] - RELAX_IMMED
,
9559 fmt
, slot
, stretched_p
, FALSE
);
9563 /* This is OK; see the note in xg_assemble_vliw_tokens. */
9569 case RELAX_LITERAL_POOL_BEGIN
:
9570 if (fragP
->fr_var
!= 0)
9572 /* We have a converted "candidate" literal pool;
9573 assemble a jump around it. */
9575 if (!litpool_slotbuf
)
9577 litpool_buf
= xtensa_insnbuf_alloc (isa
);
9578 litpool_slotbuf
= xtensa_insnbuf_alloc (isa
);
9581 fragP
->tc_frag_data
.relax_seen
= FALSE
; /* Need another pass. */
9582 fragP
->tc_frag_data
.is_insn
= TRUE
;
9584 insn
.insn_type
= ITYPE_INSN
;
9585 insn
.opcode
= xtensa_j_opcode
;
9587 set_expr_symbol_offset (&insn
.tok
[0], fragP
->fr_symbol
,
9589 fmt
= xg_get_single_format (xtensa_j_opcode
);
9590 tinsn_to_slotbuf (fmt
, 0, &insn
, litpool_slotbuf
);
9591 xtensa_format_set_slot (isa
, fmt
, 0, litpool_buf
, litpool_slotbuf
);
9592 xtensa_insnbuf_to_chars (isa
, litpool_buf
,
9593 (unsigned char *)fragP
->fr_literal
+
9598 fix_new (fragP
, 0, 3, fragP
->fr_symbol
, 0, TRUE
,
9599 BFD_RELOC_XTENSA_SLOT0_OP
);
9603 case RELAX_LITERAL_POOL_END
:
9604 case RELAX_LITERAL_POOL_CANDIDATE_BEGIN
:
9605 case RELAX_MAYBE_UNREACHABLE
:
9606 case RELAX_MAYBE_DESIRE_ALIGN
:
9607 /* No relaxation required. */
9610 case RELAX_FILL_NOP
:
9611 case RELAX_UNREACHABLE
:
9612 if (fragP
->tc_frag_data
.relax_seen
)
9613 new_stretch
+= relax_frag_for_align (fragP
, stretch
);
9616 case RELAX_TRAMPOLINE
:
9617 if (fragP
->tc_frag_data
.relax_seen
)
9618 xg_relax_trampoline (fragP
, stretch
, &new_stretch
);
9622 as_bad (_("bad relaxation state"));
9625 /* Tell gas we need another relaxation pass. */
9626 if (! fragP
->tc_frag_data
.relax_seen
)
9628 fragP
->tc_frag_data
.relax_seen
= TRUE
;
9632 new_logical_line (file_name
, line
);
9638 relax_frag_loop_align (fragS
*fragP
, long stretch
)
9640 addressT old_address
, old_next_address
, old_size
;
9641 addressT new_address
, new_next_address
, new_size
;
9644 /* All the frags with relax_frag_for_alignment prior to this one in the
9645 section have been done, hopefully eliminating the need for a NOP here.
9646 But, this will put it in if necessary. */
9648 /* Calculate the old address of this fragment and the next fragment. */
9649 old_address
= fragP
->fr_address
- stretch
;
9650 old_next_address
= (fragP
->fr_address
- stretch
+ fragP
->fr_fix
+
9651 fragP
->tc_frag_data
.text_expansion
[0]);
9652 old_size
= old_next_address
- old_address
;
9654 /* Calculate the new address of this fragment and the next fragment. */
9655 new_address
= fragP
->fr_address
;
9657 get_noop_aligned_address (fragP
, fragP
->fr_address
+ fragP
->fr_fix
);
9658 new_size
= new_next_address
- new_address
;
9660 growth
= new_size
- old_size
;
9662 /* Fix up the text_expansion field and return the new growth. */
9663 fragP
->tc_frag_data
.text_expansion
[0] += growth
;
9668 /* Add a NOP instruction. */
9671 relax_frag_add_nop (fragS
*fragP
)
9673 char *nop_buf
= fragP
->fr_literal
+ fragP
->fr_fix
;
9674 int length
= fragP
->tc_frag_data
.is_no_density
? 3 : 2;
9675 assemble_nop (length
, nop_buf
);
9676 fragP
->tc_frag_data
.is_insn
= TRUE
;
9678 if (fragP
->fr_var
< length
)
9680 as_fatal (_("fr_var (%ld) < length (%d)"), (long) fragP
->fr_var
, length
);
9684 fragP
->fr_fix
+= length
;
9685 fragP
->fr_var
-= length
;
9690 static long future_alignment_required (fragS
*, long);
9693 relax_frag_for_align (fragS
*fragP
, long stretch
)
9695 /* Overview of the relaxation procedure for alignment:
9696 We can widen with NOPs or by widening instructions or by filling
9697 bytes after jump instructions. Find the opportune places and widen
9698 them if necessary. */
9703 gas_assert (fragP
->fr_subtype
== RELAX_FILL_NOP
9704 || fragP
->fr_subtype
== RELAX_UNREACHABLE
9705 || (fragP
->fr_subtype
== RELAX_SLOTS
9706 && fragP
->tc_frag_data
.slot_subtypes
[0] == RELAX_NARROW
));
9708 stretch_me
= future_alignment_required (fragP
, stretch
);
9709 diff
= stretch_me
- fragP
->tc_frag_data
.text_expansion
[0];
9715 /* We expanded on a previous pass. Can we shrink now? */
9716 long shrink
= fragP
->tc_frag_data
.text_expansion
[0] - stretch_me
;
9717 if (shrink
<= stretch
&& stretch
> 0)
9719 fragP
->tc_frag_data
.text_expansion
[0] = stretch_me
;
9725 /* Below here, diff > 0. */
9726 fragP
->tc_frag_data
.text_expansion
[0] = stretch_me
;
9732 /* Return the address of the next frag that should be aligned.
9734 By "address" we mean the address it _would_ be at if there
9735 is no action taken to align it between here and the target frag.
9736 In other words, if no narrows and no fill nops are used between
9737 here and the frag to align, _even_if_ some of the frags we use
9738 to align targets have already expanded on a previous relaxation
9741 Also, count each frag that may be used to help align the target.
9743 Return 0 if there are no frags left in the chain that need to be
9747 find_address_of_next_align_frag (fragS
**fragPP
,
9751 bfd_boolean
*paddable
)
9753 fragS
*fragP
= *fragPP
;
9754 addressT address
= fragP
->fr_address
;
9756 /* Do not reset the counts to 0. */
9760 /* Limit this to a small search. */
9761 if (*widens
>= (int) xtensa_fetch_width
)
9766 address
+= fragP
->fr_fix
;
9768 if (fragP
->fr_type
== rs_fill
)
9769 address
+= fragP
->fr_offset
* fragP
->fr_var
;
9770 else if (fragP
->fr_type
== rs_machine_dependent
)
9772 switch (fragP
->fr_subtype
)
9774 case RELAX_UNREACHABLE
:
9778 case RELAX_FILL_NOP
:
9780 if (!fragP
->tc_frag_data
.is_no_density
)
9785 if (fragP
->tc_frag_data
.slot_subtypes
[0] == RELAX_NARROW
)
9790 address
+= total_frag_text_expansion (fragP
);
9794 address
+= fragP
->tc_frag_data
.text_expansion
[0];
9797 case RELAX_ALIGN_NEXT_OPCODE
:
9798 case RELAX_DESIRE_ALIGN
:
9802 case RELAX_MAYBE_UNREACHABLE
:
9803 case RELAX_MAYBE_DESIRE_ALIGN
:
9808 /* Just punt if we don't know the type. */
9815 /* Just punt if we don't know the type. */
9819 fragP
= fragP
->fr_next
;
9827 static long bytes_to_stretch (fragS
*, int, int, int, int);
9830 future_alignment_required (fragS
*fragP
, long stretch ATTRIBUTE_UNUSED
)
9832 fragS
*this_frag
= fragP
;
9836 int narrow_nops
= 0;
9837 bfd_boolean paddable
= FALSE
;
9838 offsetT local_opt_diff
;
9841 int stretch_amount
= 0;
9842 int local_stretch_amount
;
9843 int global_stretch_amount
;
9845 address
= find_address_of_next_align_frag
9846 (&fragP
, &wide_nops
, &narrow_nops
, &num_widens
, &paddable
);
9850 if (this_frag
->tc_frag_data
.is_aligning_branch
)
9851 this_frag
->tc_frag_data
.slot_subtypes
[0] = RELAX_IMMED
;
9853 frag_wane (this_frag
);
9857 local_opt_diff
= get_aligned_diff (fragP
, address
, &max_diff
);
9858 opt_diff
= local_opt_diff
;
9859 gas_assert (opt_diff
>= 0);
9860 gas_assert (max_diff
>= opt_diff
);
9865 fragP
= fragP
->fr_next
;
9867 while (fragP
&& opt_diff
< max_diff
&& address
)
9869 /* We only use these to determine if we can exit early
9870 because there will be plenty of ways to align future
9872 int glob_widens
= 0;
9875 bfd_boolean glob_pad
= 0;
9876 address
= find_address_of_next_align_frag
9877 (&fragP
, &glob_widens
, &dnn
, &dw
, &glob_pad
);
9878 /* If there is a padable portion, then skip. */
9879 if (glob_pad
|| glob_widens
>= (1 << branch_align_power (now_seg
)))
9884 offsetT next_m_diff
;
9885 offsetT next_o_diff
;
9887 /* Downrange frags haven't had stretch added to them yet. */
9890 /* The address also includes any text expansion from this
9891 frag in a previous pass, but we don't want that. */
9892 address
-= this_frag
->tc_frag_data
.text_expansion
[0];
9894 /* Assume we are going to move at least opt_diff. In
9895 reality, we might not be able to, but assuming that
9896 we will helps catch cases where moving opt_diff pushes
9897 the next target from aligned to unaligned. */
9898 address
+= opt_diff
;
9900 next_o_diff
= get_aligned_diff (fragP
, address
, &next_m_diff
);
9902 /* Now cleanup for the adjustments to address. */
9903 next_o_diff
+= opt_diff
;
9904 next_m_diff
+= opt_diff
;
9905 if (next_o_diff
<= max_diff
&& next_o_diff
> opt_diff
)
9906 opt_diff
= next_o_diff
;
9907 if (next_m_diff
< max_diff
)
9908 max_diff
= next_m_diff
;
9909 fragP
= fragP
->fr_next
;
9913 /* If there are enough wideners in between, do it. */
9916 if (this_frag
->fr_subtype
== RELAX_UNREACHABLE
)
9918 gas_assert (opt_diff
<= (signed) xtensa_fetch_width
);
9923 local_stretch_amount
9924 = bytes_to_stretch (this_frag
, wide_nops
, narrow_nops
,
9925 num_widens
, local_opt_diff
);
9926 global_stretch_amount
9927 = bytes_to_stretch (this_frag
, wide_nops
, narrow_nops
,
9928 num_widens
, opt_diff
);
9929 /* If the condition below is true, then the frag couldn't
9930 stretch the correct amount for the global case, so we just
9931 optimize locally. We'll rely on the subsequent frags to get
9932 the correct alignment in the global case. */
9933 if (global_stretch_amount
< local_stretch_amount
)
9934 stretch_amount
= local_stretch_amount
;
9936 stretch_amount
= global_stretch_amount
;
9938 if (this_frag
->fr_subtype
== RELAX_SLOTS
9939 && this_frag
->tc_frag_data
.slot_subtypes
[0] == RELAX_NARROW
)
9940 gas_assert (stretch_amount
<= 1);
9941 else if (this_frag
->fr_subtype
== RELAX_FILL_NOP
)
9943 if (this_frag
->tc_frag_data
.is_no_density
)
9944 gas_assert (stretch_amount
== 3 || stretch_amount
== 0);
9946 gas_assert (stretch_amount
<= 3);
9949 return stretch_amount
;
9953 /* The idea: widen everything you can to get a target or loop aligned,
9954 then start using NOPs.
9956 wide_nops = the number of wide NOPs available for aligning
9957 narrow_nops = the number of narrow NOPs available for aligning
9958 (a subset of wide_nops)
9959 widens = the number of narrow instructions that should be widened
9964 bytes_to_stretch (fragS
*this_frag
,
9973 int bytes_short
= desired_diff
- num_widens
;
9975 gas_assert (desired_diff
>= 0
9976 && desired_diff
< (signed) xtensa_fetch_width
);
9977 if (desired_diff
== 0)
9980 gas_assert (wide_nops
> 0 || num_widens
> 0);
9982 /* Always prefer widening to NOP-filling. */
9983 if (bytes_short
< 0)
9985 /* There are enough RELAX_NARROW frags after this one
9986 to align the target without widening this frag in any way. */
9990 if (bytes_short
== 0)
9992 /* Widen every narrow between here and the align target
9993 and the align target will be properly aligned. */
9994 if (this_frag
->fr_subtype
== RELAX_FILL_NOP
)
10000 /* From here we will need at least one NOP to get an alignment.
10001 However, we may not be able to align at all, in which case,
10003 nops_needed
= desired_diff
/ 3;
10005 /* If there aren't enough nops, don't widen. */
10006 if (nops_needed
> wide_nops
)
10009 /* First try it with all wide nops. */
10010 nop_bytes
= nops_needed
* 3;
10011 extra_bytes
= desired_diff
- nop_bytes
;
10013 if (nop_bytes
+ num_widens
>= desired_diff
)
10015 if (this_frag
->fr_subtype
== RELAX_FILL_NOP
)
10017 else if (num_widens
== extra_bytes
)
10022 /* Add a narrow nop. */
10026 if (narrow_nops
== 0 || nops_needed
> wide_nops
)
10029 if (nop_bytes
+ num_widens
>= desired_diff
&& extra_bytes
>= 0)
10031 if (this_frag
->fr_subtype
== RELAX_FILL_NOP
)
10032 return !this_frag
->tc_frag_data
.is_no_density
? 2 : 3;
10033 else if (num_widens
== extra_bytes
)
10038 /* Replace a wide nop with a narrow nop--we can get here if
10039 extra_bytes was negative in the previous conditional. */
10040 if (narrow_nops
== 1)
10044 if (nop_bytes
+ num_widens
>= desired_diff
)
10046 if (this_frag
->fr_subtype
== RELAX_FILL_NOP
)
10047 return !this_frag
->tc_frag_data
.is_no_density
? 2 : 3;
10048 else if (num_widens
== extra_bytes
)
10053 /* If we can't satisfy any of the above cases, then we can't align
10054 using padding or fill nops. */
10060 xg_find_best_trampoline_for_tinsn (TInsn
*tinsn
, fragS
*fragP
)
10062 symbolS
*sym
= tinsn
->tok
[0].X_add_symbol
;
10063 addressT source
= fragP
->fr_address
;
10064 addressT target
= S_GET_VALUE (sym
) + tinsn
->tok
[0].X_add_number
;
10065 struct trampoline_seg
*ts
= find_trampoline_seg (now_seg
);
10068 if (!ts
|| !ts
->index
.n_entries
)
10071 i
= xg_find_best_trampoline (&ts
->index
, source
, target
);
10073 return ts
->index
.entry
[i
];
10077 /* Append jump to sym + offset to the end of the trampoline frag fragP.
10078 Adjust fragP's jump around if it's present. Adjust fragP's fr_fix/fr_var
10079 and finish the frag if it's full (but don't remove it from the trampoline
10080 frag index). Return fixup for the newly created jump. */
10081 static fixS
*xg_append_jump (fragS
*fragP
, symbolS
*sym
, offsetT offset
)
10086 xtensa_isa isa
= xtensa_default_isa
;
10088 gas_assert (fragP
->fr_var
>= 3);
10089 tinsn_init (&insn
);
10090 insn
.insn_type
= ITYPE_INSN
;
10091 insn
.opcode
= xtensa_j_opcode
;
10093 set_expr_symbol_offset (&insn
.tok
[0], sym
, offset
);
10094 fmt
= xg_get_single_format (xtensa_j_opcode
);
10095 tinsn_to_slotbuf (fmt
, 0, &insn
, trampoline_slotbuf
);
10096 xtensa_format_set_slot (isa
, fmt
, 0, trampoline_buf
, trampoline_slotbuf
);
10097 xtensa_insnbuf_to_chars (isa
, trampoline_buf
,
10098 (unsigned char *)fragP
->fr_literal
+ fragP
->fr_fix
, 3);
10099 fixP
= fix_new (fragP
, fragP
->fr_fix
, 3, sym
, offset
, TRUE
,
10100 BFD_RELOC_XTENSA_SLOT0_OP
);
10101 fixP
->tc_fix_data
.slot
= 0;
10103 fragP
->fr_fix
+= 3;
10104 fragP
->fr_var
-= 3;
10106 /* Adjust the jump around this trampoline (if present). */
10107 if (fragP
->tc_frag_data
.jump_around_fix
)
10108 fragP
->tc_frag_data
.jump_around_fix
->fx_offset
+= 3;
10110 /* Do we have room for more? */
10111 if (xg_is_trampoline_frag_full (fragP
))
10114 fragP
->fr_subtype
= 0;
10122 init_trampoline_frag (fragS
*fp
)
10126 if (fp
->fr_fix
== 0)
10129 char label
[10 + 2 * sizeof(fp
)];
10131 sprintf (label
, ".L0_TR_%p", fp
);
10132 lsym
= (symbolS
*)local_symbol_make (label
, now_seg
, 0, fp
);
10133 fp
->fr_symbol
= lsym
;
10134 if (fp
->tc_frag_data
.needs_jump_around
)
10136 fp
->tc_frag_data
.jump_around_fix
= xg_append_jump (fp
, lsym
, 3);
10144 xg_get_single_symbol_slot (fragS
*fragP
)
10149 for (i
= 0; i
< MAX_SLOTS
; ++i
)
10150 if (fragP
->tc_frag_data
.slot_symbols
[i
])
10152 gas_assert (slot
== -1);
10156 gas_assert (slot
>= 0 && slot
< MAX_SLOTS
);
10162 add_jump_to_trampoline (fragS
*tramp
, fragS
*origfrag
)
10164 int slot
= xg_get_single_symbol_slot (origfrag
);
10167 /* Assemble a jump to the target label in the trampoline frag. */
10168 fixP
= xg_append_jump (tramp
,
10169 origfrag
->tc_frag_data
.slot_symbols
[slot
],
10170 origfrag
->tc_frag_data
.slot_offsets
[slot
]);
10172 /* Modify the original j to point here. */
10173 origfrag
->tc_frag_data
.slot_symbols
[slot
] = tramp
->fr_symbol
;
10174 origfrag
->tc_frag_data
.slot_offsets
[slot
] = tramp
->fr_fix
- 3;
10176 /* If trampoline is full, remove it from the list. */
10177 if (xg_is_trampoline_frag_full (tramp
))
10179 struct trampoline_seg
*ts
= find_trampoline_seg (now_seg
);
10180 size_t tr
= xg_find_trampoline (&ts
->index
, tramp
->fr_address
);
10182 gas_assert (ts
->index
.entry
[tr
] == tramp
);
10183 xg_remove_trampoline_from_index (&ts
->index
, tr
);
10191 relax_frag_immed (segT segP
,
10198 bfd_boolean estimate_only
)
10202 bfd_boolean negatable_branch
= FALSE
;
10203 bfd_boolean branch_jmp_to_next
= FALSE
;
10204 bfd_boolean from_wide_insn
= FALSE
;
10205 xtensa_isa isa
= xtensa_default_isa
;
10207 offsetT frag_offset
;
10209 int num_text_bytes
, num_literal_bytes
;
10210 int literal_diff
, total_text_diff
, this_text_diff
;
10212 gas_assert (fragP
->fr_opcode
!= NULL
);
10214 xg_clear_vinsn (&cur_vinsn
);
10215 vinsn_from_chars (&cur_vinsn
, fragP
->fr_opcode
);
10216 if (cur_vinsn
.num_slots
> 1)
10217 from_wide_insn
= TRUE
;
10219 tinsn
= cur_vinsn
.slots
[slot
];
10220 tinsn_immed_from_frag (&tinsn
, fragP
, slot
);
10222 if (estimate_only
&& xtensa_opcode_is_loop (isa
, tinsn
.opcode
) == 1)
10225 if (workaround_b_j_loop_end
&& ! fragP
->tc_frag_data
.is_no_transform
)
10226 branch_jmp_to_next
= is_branch_jmp_to_next (&tinsn
, fragP
);
10228 negatable_branch
= (xtensa_opcode_is_branch (isa
, tinsn
.opcode
) == 1);
10230 old_size
= xtensa_format_length (isa
, fmt
);
10232 /* Special case: replace a branch to the next instruction with a NOP.
10233 This is required to work around a hardware bug in T1040.0 and also
10234 serves as an optimization. */
10236 if (branch_jmp_to_next
10237 && ((old_size
== 2) || (old_size
== 3))
10238 && !next_frag_is_loop_target (fragP
))
10241 /* Here is the fun stuff: Get the immediate field from this
10242 instruction. If it fits, we are done. If not, find the next
10243 instruction sequence that fits. */
10245 frag_offset
= fragP
->fr_opcode
- fragP
->fr_literal
;
10246 istack_init (&istack
);
10247 num_steps
= xg_assembly_relax (&istack
, &tinsn
, segP
, fragP
, frag_offset
,
10248 min_steps
, stretch
);
10249 gas_assert (num_steps
>= min_steps
&& num_steps
<= RELAX_IMMED_MAXSTEPS
);
10251 fragP
->tc_frag_data
.slot_subtypes
[slot
] = (int) RELAX_IMMED
+ num_steps
;
10253 /* Figure out the number of bytes needed. */
10254 num_literal_bytes
= get_num_stack_literal_bytes (&istack
);
10256 = num_literal_bytes
- fragP
->tc_frag_data
.literal_expansion
[slot
];
10257 num_text_bytes
= get_num_stack_text_bytes (&istack
);
10259 if (from_wide_insn
)
10262 while (istack
.insn
[first
].opcode
== XTENSA_UNDEFINED
)
10265 num_text_bytes
+= old_size
;
10266 if (opcode_fits_format_slot (istack
.insn
[first
].opcode
, fmt
, slot
))
10267 num_text_bytes
-= xg_get_single_size (istack
.insn
[first
].opcode
);
10270 /* The first instruction in the relaxed sequence will go after
10271 the current wide instruction, and thus its symbolic immediates
10274 istack_init (&istack
);
10275 num_steps
= xg_assembly_relax (&istack
, &tinsn
, segP
, fragP
,
10276 frag_offset
+ old_size
,
10277 min_steps
, stretch
+ old_size
);
10278 gas_assert (num_steps
>= min_steps
&& num_steps
<= RELAX_IMMED_MAXSTEPS
);
10280 fragP
->tc_frag_data
.slot_subtypes
[slot
]
10281 = (int) RELAX_IMMED
+ num_steps
;
10283 num_literal_bytes
= get_num_stack_literal_bytes (&istack
);
10285 = num_literal_bytes
- fragP
->tc_frag_data
.literal_expansion
[slot
];
10287 num_text_bytes
= get_num_stack_text_bytes (&istack
) + old_size
;
10291 total_text_diff
= num_text_bytes
- old_size
;
10292 this_text_diff
= total_text_diff
- fragP
->tc_frag_data
.text_expansion
[slot
];
10294 /* It MUST get larger. If not, we could get an infinite loop. */
10295 gas_assert (num_text_bytes
>= 0);
10296 gas_assert (literal_diff
>= 0);
10297 gas_assert (total_text_diff
>= 0);
10299 fragP
->tc_frag_data
.text_expansion
[slot
] = total_text_diff
;
10300 fragP
->tc_frag_data
.literal_expansion
[slot
] = num_literal_bytes
;
10301 gas_assert (fragP
->tc_frag_data
.text_expansion
[slot
] >= 0);
10302 gas_assert (fragP
->tc_frag_data
.literal_expansion
[slot
] >= 0);
10304 /* Find the associated expandable literal for this. */
10305 if (literal_diff
!= 0)
10307 fragS
*lit_fragP
= fragP
->tc_frag_data
.literal_frags
[slot
];
10310 gas_assert (literal_diff
== 4);
10311 lit_fragP
->tc_frag_data
.unreported_expansion
+= literal_diff
;
10313 /* We expect that the literal section state has NOT been
10315 gas_assert (lit_fragP
->fr_type
== rs_machine_dependent
10316 && lit_fragP
->fr_subtype
== RELAX_LITERAL
);
10317 lit_fragP
->fr_subtype
= RELAX_LITERAL_NR
;
10319 /* We need to mark this section for another iteration
10325 if (negatable_branch
&& istack
.ninsn
> 1)
10326 update_next_frag_state (fragP
);
10328 /* If last insn is a jump, and it cannot reach its target, try to find a trampoline. */
10329 if (istack
.ninsn
> 2 &&
10330 istack
.insn
[istack
.ninsn
- 1].insn_type
== ITYPE_LABEL
&&
10331 istack
.insn
[istack
.ninsn
- 2].insn_type
== ITYPE_INSN
&&
10332 istack
.insn
[istack
.ninsn
- 2].opcode
== xtensa_j_opcode
)
10334 TInsn
*jinsn
= &istack
.insn
[istack
.ninsn
- 2];
10335 struct trampoline_seg
*ts
= find_trampoline_seg (segP
);
10336 struct trampoline_chain
*tc
= NULL
;
10339 !xg_symbolic_immeds_fit (jinsn
, segP
, fragP
, fragP
->fr_offset
,
10342 int s
= xg_get_single_symbol_slot (fragP
);
10343 addressT offset
= fragP
->tc_frag_data
.slot_offsets
[s
];
10345 tc
= xg_find_best_eq_target (ts
, fragP
->fr_address
,
10346 &fragP
->tc_frag_data
.slot_symbols
[s
],
10350 tc
= xg_create_trampoline_chain (ts
,
10351 fragP
->tc_frag_data
.slot_symbols
[s
],
10353 fragP
->tc_frag_data
.slot_offsets
[s
] = offset
;
10354 tinsn_immed_from_frag (jinsn
, fragP
, s
);
10357 if (!xg_symbolic_immeds_fit (jinsn
, segP
, fragP
, fragP
->fr_offset
,
10360 fragS
*tf
= xg_find_best_trampoline_for_tinsn (jinsn
, fragP
);
10366 this_text_diff
+= init_trampoline_frag (tf
) + 3;
10367 fixP
= add_jump_to_trampoline (tf
, fragP
);
10368 xg_add_location_to_chain (tc
, fixP
->fx_frag
->fr_symbol
,
10370 fragP
->tc_frag_data
.relax_seen
= FALSE
;
10374 /* If target symbol is undefined, assume it will reach once linked. */
10375 expressionS
*exp
= &istack
.insn
[istack
.ninsn
- 2].tok
[0];
10377 if (exp
->X_op
== O_symbol
&& S_IS_DEFINED (exp
->X_add_symbol
))
10379 as_bad_where (fragP
->fr_file
, fragP
->fr_line
,
10380 _("jump target out of range; no usable trampoline found"));
10386 return this_text_diff
;
10390 /* md_convert_frag Hook and Helper Functions. */
10392 static void convert_frag_align_next_opcode (fragS
*);
10393 static void convert_frag_narrow (segT
, fragS
*, xtensa_format
, int);
10394 static void convert_frag_fill_nop (fragS
*);
10395 static void convert_frag_immed (segT
, fragS
*, int, xtensa_format
, int);
10398 md_convert_frag (bfd
*abfd ATTRIBUTE_UNUSED
, segT sec
, fragS
*fragp
)
10400 static xtensa_insnbuf vbuf
= NULL
;
10401 xtensa_isa isa
= xtensa_default_isa
;
10405 const char *file_name
;
10408 file_name
= as_where (&line
);
10409 new_logical_line (fragp
->fr_file
, fragp
->fr_line
);
10411 switch (fragp
->fr_subtype
)
10413 case RELAX_ALIGN_NEXT_OPCODE
:
10414 /* Always convert. */
10415 convert_frag_align_next_opcode (fragp
);
10418 case RELAX_DESIRE_ALIGN
:
10419 /* Do nothing. If not aligned already, too bad. */
10422 case RELAX_LITERAL
:
10423 case RELAX_LITERAL_FINAL
:
10428 vbuf
= xtensa_insnbuf_alloc (isa
);
10430 xtensa_insnbuf_from_chars
10431 (isa
, vbuf
, (unsigned char *) fragp
->fr_opcode
, 0);
10432 fmt
= xtensa_format_decode (isa
, vbuf
);
10433 num_slots
= xtensa_format_num_slots (isa
, fmt
);
10435 for (slot
= 0; slot
< num_slots
; slot
++)
10437 switch (fragp
->tc_frag_data
.slot_subtypes
[slot
])
10440 convert_frag_narrow (sec
, fragp
, fmt
, slot
);
10444 case RELAX_IMMED_STEP1
:
10445 case RELAX_IMMED_STEP2
:
10446 case RELAX_IMMED_STEP3
:
10447 /* Place the immediate. */
10450 fragp
->tc_frag_data
.slot_subtypes
[slot
] - RELAX_IMMED
,
10455 /* This is OK because some slots could have
10456 relaxations and others have none. */
10462 case RELAX_UNREACHABLE
:
10463 memset (&fragp
->fr_literal
[fragp
->fr_fix
], 0, fragp
->fr_var
);
10464 fragp
->fr_fix
+= fragp
->tc_frag_data
.text_expansion
[0];
10465 fragp
->fr_var
-= fragp
->tc_frag_data
.text_expansion
[0];
10469 case RELAX_MAYBE_UNREACHABLE
:
10470 case RELAX_MAYBE_DESIRE_ALIGN
:
10474 case RELAX_FILL_NOP
:
10475 convert_frag_fill_nop (fragp
);
10478 case RELAX_LITERAL_NR
:
10479 if (use_literal_section
)
10481 /* This should have been handled during relaxation. When
10482 relaxing a code segment, literals sometimes need to be
10483 added to the corresponding literal segment. If that
10484 literal segment has already been relaxed, then we end up
10485 in this situation. Marking the literal segments as data
10486 would make this happen less often (since GAS always relaxes
10487 code before data), but we could still get into trouble if
10488 there are instructions in a segment that is not marked as
10489 containing code. Until we can implement a better solution,
10490 cheat and adjust the addresses of all the following frags.
10491 This could break subsequent alignments, but the linker's
10492 literal coalescing will do that anyway. */
10495 fragp
->fr_subtype
= RELAX_LITERAL_FINAL
;
10496 gas_assert (fragp
->tc_frag_data
.unreported_expansion
== 4);
10497 memset (&fragp
->fr_literal
[fragp
->fr_fix
], 0, 4);
10498 fragp
->fr_var
-= 4;
10499 fragp
->fr_fix
+= 4;
10500 for (f
= fragp
->fr_next
; f
; f
= f
->fr_next
)
10501 f
->fr_address
+= 4;
10504 as_bad (_("invalid relaxation fragment result"));
10507 case RELAX_TRAMPOLINE
:
10512 new_logical_line (file_name
, line
);
10517 convert_frag_align_next_opcode (fragS
*fragp
)
10519 char *nop_buf
; /* Location for Writing. */
10520 bfd_boolean use_no_density
= fragp
->tc_frag_data
.is_no_density
;
10521 addressT aligned_address
;
10523 int nop
, nop_count
;
10525 aligned_address
= get_noop_aligned_address (fragp
, fragp
->fr_address
+
10527 fill_size
= aligned_address
- (fragp
->fr_address
+ fragp
->fr_fix
);
10528 nop_count
= get_text_align_nop_count (fill_size
, use_no_density
);
10529 nop_buf
= fragp
->fr_literal
+ fragp
->fr_fix
;
10531 for (nop
= 0; nop
< nop_count
; nop
++)
10534 nop_size
= get_text_align_nth_nop_size (fill_size
, nop
, use_no_density
);
10536 assemble_nop (nop_size
, nop_buf
);
10537 nop_buf
+= nop_size
;
10540 fragp
->fr_fix
+= fill_size
;
10541 fragp
->fr_var
-= fill_size
;
10546 convert_frag_narrow (segT segP
, fragS
*fragP
, xtensa_format fmt
, int slot
)
10548 TInsn tinsn
, single_target
;
10549 int size
, old_size
, diff
;
10550 offsetT frag_offset
;
10552 gas_assert (slot
== 0);
10553 tinsn_from_chars (&tinsn
, fragP
->fr_opcode
, 0);
10555 if (fragP
->tc_frag_data
.is_aligning_branch
== 1)
10557 gas_assert (fragP
->tc_frag_data
.text_expansion
[0] == 1
10558 || fragP
->tc_frag_data
.text_expansion
[0] == 0);
10559 convert_frag_immed (segP
, fragP
, fragP
->tc_frag_data
.text_expansion
[0],
10564 if (fragP
->tc_frag_data
.text_expansion
[0] == 0)
10566 /* No conversion. */
10571 gas_assert (fragP
->fr_opcode
!= NULL
);
10573 /* Frags in this relaxation state should only contain
10574 single instruction bundles. */
10575 tinsn_immed_from_frag (&tinsn
, fragP
, 0);
10577 /* Just convert it to a wide form.... */
10579 old_size
= xg_get_single_size (tinsn
.opcode
);
10581 tinsn_init (&single_target
);
10582 frag_offset
= fragP
->fr_opcode
- fragP
->fr_literal
;
10584 if (! xg_is_single_relaxable_insn (&tinsn
, &single_target
, FALSE
))
10586 as_bad (_("unable to widen instruction"));
10590 size
= xg_get_single_size (single_target
.opcode
);
10591 xg_emit_insn_to_buf (&single_target
, fragP
->fr_opcode
, fragP
,
10592 frag_offset
, TRUE
);
10594 diff
= size
- old_size
;
10595 gas_assert (diff
>= 0);
10596 gas_assert (diff
<= fragP
->fr_var
);
10597 fragP
->fr_var
-= diff
;
10598 fragP
->fr_fix
+= diff
;
10606 convert_frag_fill_nop (fragS
*fragP
)
10608 char *loc
= &fragP
->fr_literal
[fragP
->fr_fix
];
10609 int size
= fragP
->tc_frag_data
.text_expansion
[0];
10610 gas_assert ((unsigned) size
== (fragP
->fr_next
->fr_address
10611 - fragP
->fr_address
- fragP
->fr_fix
));
10614 /* No conversion. */
10618 assemble_nop (size
, loc
);
10619 fragP
->tc_frag_data
.is_insn
= TRUE
;
10620 fragP
->fr_var
-= size
;
10621 fragP
->fr_fix
+= size
;
10626 static fixS
*fix_new_exp_in_seg
10627 (segT
, subsegT
, fragS
*, int, int, expressionS
*, int,
10628 bfd_reloc_code_real_type
);
10629 static void convert_frag_immed_finish_loop (segT
, fragS
*, TInsn
*);
10632 convert_frag_immed (segT segP
,
10638 char *immed_instr
= fragP
->fr_opcode
;
10640 bfd_boolean expanded
= FALSE
;
10641 bfd_boolean branch_jmp_to_next
= FALSE
;
10642 char *fr_opcode
= fragP
->fr_opcode
;
10643 xtensa_isa isa
= xtensa_default_isa
;
10644 bfd_boolean from_wide_insn
= FALSE
;
10646 bfd_boolean is_loop
;
10648 gas_assert (fr_opcode
!= NULL
);
10650 xg_clear_vinsn (&cur_vinsn
);
10652 vinsn_from_chars (&cur_vinsn
, fr_opcode
);
10653 if (cur_vinsn
.num_slots
> 1)
10654 from_wide_insn
= TRUE
;
10656 orig_tinsn
= cur_vinsn
.slots
[slot
];
10657 tinsn_immed_from_frag (&orig_tinsn
, fragP
, slot
);
10659 is_loop
= xtensa_opcode_is_loop (xtensa_default_isa
, orig_tinsn
.opcode
) == 1;
10661 if (workaround_b_j_loop_end
&& ! fragP
->tc_frag_data
.is_no_transform
)
10662 branch_jmp_to_next
= is_branch_jmp_to_next (&orig_tinsn
, fragP
);
10664 if (branch_jmp_to_next
&& !next_frag_is_loop_target (fragP
))
10666 /* Conversion just inserts a NOP and marks the fix as completed. */
10667 bytes
= xtensa_format_length (isa
, fmt
);
10670 cur_vinsn
.slots
[slot
].opcode
=
10671 xtensa_format_slot_nop_opcode (isa
, cur_vinsn
.format
, slot
);
10672 cur_vinsn
.slots
[slot
].ntok
= 0;
10676 bytes
+= fragP
->tc_frag_data
.text_expansion
[0];
10677 gas_assert (bytes
== 2 || bytes
== 3);
10678 build_nop (&cur_vinsn
.slots
[0], bytes
);
10679 fragP
->fr_fix
+= fragP
->tc_frag_data
.text_expansion
[0];
10681 vinsn_to_insnbuf (&cur_vinsn
, fr_opcode
, frag_now
, TRUE
);
10682 xtensa_insnbuf_to_chars
10683 (isa
, cur_vinsn
.insnbuf
, (unsigned char *) fr_opcode
, 0);
10688 /* Here is the fun stuff: Get the immediate field from this
10689 instruction. If it fits, we're done. If not, find the next
10690 instruction sequence that fits. */
10694 symbolS
*lit_sym
= NULL
;
10695 int total_size
= 0;
10696 int target_offset
= 0;
10699 symbolS
*gen_label
= NULL
;
10700 offsetT frag_offset
;
10701 bfd_boolean first
= TRUE
;
10703 /* It does not fit. Find something that does and
10704 convert immediately. */
10705 frag_offset
= fr_opcode
- fragP
->fr_literal
;
10706 istack_init (&istack
);
10707 xg_assembly_relax (&istack
, &orig_tinsn
,
10708 segP
, fragP
, frag_offset
, min_steps
, 0);
10710 old_size
= xtensa_format_length (isa
, fmt
);
10712 /* Assemble this right inline. */
10714 /* First, create the mapping from a label name to the REAL label. */
10716 for (i
= 0; i
< istack
.ninsn
; i
++)
10718 TInsn
*tinsn
= &istack
.insn
[i
];
10721 switch (tinsn
->insn_type
)
10723 case ITYPE_LITERAL
:
10724 if (lit_sym
!= NULL
)
10725 as_bad (_("multiple literals in expansion"));
10726 /* First find the appropriate space in the literal pool. */
10727 lit_frag
= fragP
->tc_frag_data
.literal_frags
[slot
];
10728 if (lit_frag
== NULL
)
10729 as_bad (_("no registered fragment for literal"));
10730 if (tinsn
->ntok
!= 1)
10731 as_bad (_("number of literal tokens != 1"));
10733 /* Set the literal symbol and add a fixup. */
10734 lit_sym
= lit_frag
->fr_symbol
;
10738 if (align_targets
&& !is_loop
)
10740 fragS
*unreach
= fragP
->fr_next
;
10741 while (!(unreach
->fr_type
== rs_machine_dependent
10742 && (unreach
->fr_subtype
== RELAX_MAYBE_UNREACHABLE
10743 || unreach
->fr_subtype
== RELAX_UNREACHABLE
)))
10745 unreach
= unreach
->fr_next
;
10748 gas_assert (unreach
->fr_type
== rs_machine_dependent
10749 && (unreach
->fr_subtype
== RELAX_MAYBE_UNREACHABLE
10750 || unreach
->fr_subtype
== RELAX_UNREACHABLE
));
10752 target_offset
+= unreach
->tc_frag_data
.text_expansion
[0];
10754 gas_assert (gen_label
== NULL
);
10755 gen_label
= symbol_new (FAKE_LABEL_NAME
, now_seg
,
10756 fr_opcode
- fragP
->fr_literal
10757 + target_offset
, fragP
);
10761 if (first
&& from_wide_insn
)
10763 target_offset
+= xtensa_format_length (isa
, fmt
);
10765 if (!opcode_fits_format_slot (tinsn
->opcode
, fmt
, slot
))
10766 target_offset
+= xg_get_single_size (tinsn
->opcode
);
10769 target_offset
+= xg_get_single_size (tinsn
->opcode
);
10776 for (i
= 0; i
< istack
.ninsn
; i
++)
10778 TInsn
*tinsn
= &istack
.insn
[i
];
10782 bfd_reloc_code_real_type reloc_type
;
10784 switch (tinsn
->insn_type
)
10786 case ITYPE_LITERAL
:
10787 lit_frag
= fragP
->tc_frag_data
.literal_frags
[slot
];
10788 /* Already checked. */
10789 gas_assert (lit_frag
!= NULL
);
10790 gas_assert (lit_sym
!= NULL
);
10791 gas_assert (tinsn
->ntok
== 1);
10793 target_seg
= S_GET_SEGMENT (lit_sym
);
10794 gas_assert (target_seg
);
10795 reloc_type
= map_operator_to_reloc (tinsn
->tok
[0].X_op
, TRUE
);
10796 fix_new_exp_in_seg (target_seg
, 0, lit_frag
, 0, 4,
10797 &tinsn
->tok
[0], FALSE
, reloc_type
);
10804 xg_resolve_labels (tinsn
, gen_label
);
10805 xg_resolve_literals (tinsn
, lit_sym
);
10806 if (from_wide_insn
&& first
)
10809 if (opcode_fits_format_slot (tinsn
->opcode
, fmt
, slot
))
10811 cur_vinsn
.slots
[slot
] = *tinsn
;
10815 cur_vinsn
.slots
[slot
].opcode
=
10816 xtensa_format_slot_nop_opcode (isa
, fmt
, slot
);
10817 cur_vinsn
.slots
[slot
].ntok
= 0;
10819 vinsn_to_insnbuf (&cur_vinsn
, immed_instr
, fragP
, TRUE
);
10820 xtensa_insnbuf_to_chars (isa
, cur_vinsn
.insnbuf
,
10821 (unsigned char *) immed_instr
, 0);
10822 fragP
->tc_frag_data
.is_insn
= TRUE
;
10823 size
= xtensa_format_length (isa
, fmt
);
10824 if (!opcode_fits_format_slot (tinsn
->opcode
, fmt
, slot
))
10826 xg_emit_insn_to_buf
10827 (tinsn
, immed_instr
+ size
, fragP
,
10828 immed_instr
- fragP
->fr_literal
+ size
, TRUE
);
10829 size
+= xg_get_single_size (tinsn
->opcode
);
10834 size
= xg_get_single_size (tinsn
->opcode
);
10835 xg_emit_insn_to_buf (tinsn
, immed_instr
, fragP
,
10836 immed_instr
- fragP
->fr_literal
, TRUE
);
10838 immed_instr
+= size
;
10839 total_size
+= size
;
10844 diff
= total_size
- old_size
;
10845 gas_assert (diff
>= 0);
10848 gas_assert (diff
<= fragP
->fr_var
);
10849 fragP
->fr_var
-= diff
;
10850 fragP
->fr_fix
+= diff
;
10853 /* Check for undefined immediates in LOOP instructions. */
10857 sym
= orig_tinsn
.tok
[1].X_add_symbol
;
10858 if (sym
!= NULL
&& !S_IS_DEFINED (sym
))
10860 as_bad (_("unresolved loop target symbol: %s"), S_GET_NAME (sym
));
10863 sym
= orig_tinsn
.tok
[1].X_op_symbol
;
10864 if (sym
!= NULL
&& !S_IS_DEFINED (sym
))
10866 as_bad (_("unresolved loop target symbol: %s"), S_GET_NAME (sym
));
10871 if (expanded
&& xtensa_opcode_is_loop (isa
, orig_tinsn
.opcode
) == 1)
10872 convert_frag_immed_finish_loop (segP
, fragP
, &orig_tinsn
);
10874 if (expanded
&& is_direct_call_opcode (orig_tinsn
.opcode
))
10876 /* Add an expansion note on the expanded instruction. */
10877 fix_new_exp_in_seg (now_seg
, 0, fragP
, fr_opcode
- fragP
->fr_literal
, 4,
10878 &orig_tinsn
.tok
[0], TRUE
,
10879 BFD_RELOC_XTENSA_ASM_EXPAND
);
10884 /* Add a new fix expression into the desired segment. We have to
10885 switch to that segment to do this. */
10888 fix_new_exp_in_seg (segT new_seg
,
10889 subsegT new_subseg
,
10895 bfd_reloc_code_real_type r_type
)
10898 segT seg
= now_seg
;
10899 subsegT subseg
= now_subseg
;
10901 gas_assert (new_seg
!= 0);
10902 subseg_set (new_seg
, new_subseg
);
10904 new_fix
= fix_new_exp (frag
, where
, size
, exp
, pcrel
, r_type
);
10905 subseg_set (seg
, subseg
);
10910 /* Relax a loop instruction so that it can span loop >256 bytes.
10916 addi as, as, lo8 (label-.L1)
10917 addmi as, as, mid8 (label-.L1)
10928 convert_frag_immed_finish_loop (segT segP
, fragS
*fragP
, TInsn
*tinsn
)
10933 unsigned long target
;
10934 static xtensa_insnbuf insnbuf
= NULL
;
10935 unsigned int loop_length
, loop_length_hi
, loop_length_lo
;
10936 xtensa_isa isa
= xtensa_default_isa
;
10937 addressT loop_offset
;
10938 addressT addi_offset
= 9;
10939 addressT addmi_offset
= 12;
10944 insnbuf
= xtensa_insnbuf_alloc (isa
);
10946 /* Get the loop offset. */
10947 loop_offset
= get_expanded_loop_offset (tinsn
->opcode
);
10949 /* Validate that there really is a LOOP at the loop_offset. Because
10950 loops are not bundleable, we can assume that the instruction will be
10952 tinsn_from_chars (&loop_insn
, fragP
->fr_opcode
+ loop_offset
, 0);
10953 tinsn_immed_from_frag (&loop_insn
, fragP
, 0);
10955 gas_assert (xtensa_opcode_is_loop (isa
, loop_insn
.opcode
) == 1);
10956 addi_offset
+= loop_offset
;
10957 addmi_offset
+= loop_offset
;
10959 gas_assert (tinsn
->ntok
== 2);
10960 if (tinsn
->tok
[1].X_op
== O_constant
)
10961 target
= tinsn
->tok
[1].X_add_number
;
10962 else if (tinsn
->tok
[1].X_op
== O_symbol
)
10964 /* Find the fragment. */
10965 symbolS
*sym
= tinsn
->tok
[1].X_add_symbol
;
10966 gas_assert (S_GET_SEGMENT (sym
) == segP
10967 || S_GET_SEGMENT (sym
) == absolute_section
);
10968 target
= (S_GET_VALUE (sym
) + tinsn
->tok
[1].X_add_number
);
10972 as_bad (_("invalid expression evaluation type %d"), tinsn
->tok
[1].X_op
);
10976 loop_length
= target
- (fragP
->fr_address
+ fragP
->fr_fix
);
10977 loop_length_hi
= loop_length
& ~0x0ff;
10978 loop_length_lo
= loop_length
& 0x0ff;
10979 if (loop_length_lo
>= 128)
10981 loop_length_lo
-= 256;
10982 loop_length_hi
+= 256;
10985 /* Because addmi sign-extends the immediate, 'loop_length_hi' can be at most
10986 32512. If the loop is larger than that, then we just fail. */
10987 if (loop_length_hi
> 32512)
10988 as_bad_where (fragP
->fr_file
, fragP
->fr_line
,
10989 _("loop too long for LOOP instruction"));
10991 tinsn_from_chars (&addi_insn
, fragP
->fr_opcode
+ addi_offset
, 0);
10992 gas_assert (addi_insn
.opcode
== xtensa_addi_opcode
);
10994 tinsn_from_chars (&addmi_insn
, fragP
->fr_opcode
+ addmi_offset
, 0);
10995 gas_assert (addmi_insn
.opcode
== xtensa_addmi_opcode
);
10997 set_expr_const (&addi_insn
.tok
[2], loop_length_lo
);
10998 tinsn_to_insnbuf (&addi_insn
, insnbuf
);
11000 fragP
->tc_frag_data
.is_insn
= TRUE
;
11001 xtensa_insnbuf_to_chars
11002 (isa
, insnbuf
, (unsigned char *) fragP
->fr_opcode
+ addi_offset
, 0);
11004 set_expr_const (&addmi_insn
.tok
[2], loop_length_hi
);
11005 tinsn_to_insnbuf (&addmi_insn
, insnbuf
);
11006 xtensa_insnbuf_to_chars
11007 (isa
, insnbuf
, (unsigned char *) fragP
->fr_opcode
+ addmi_offset
, 0);
11009 /* Walk through all of the frags from here to the loop end
11010 and mark them as no_transform to keep them from being modified
11011 by the linker. If we ever have a relocation for the
11012 addi/addmi of the difference of two symbols we can remove this. */
11015 for (next_fragP
= fragP
; next_fragP
!= NULL
;
11016 next_fragP
= next_fragP
->fr_next
)
11018 next_fragP
->tc_frag_data
.is_no_transform
= TRUE
;
11019 if (next_fragP
->tc_frag_data
.is_loop_target
)
11021 if (target_count
== 2)
11027 /* A map that keeps information on a per-subsegment basis. This is
11028 maintained during initial assembly, but is invalid once the
11029 subsegments are smashed together. I.E., it cannot be used during
11032 typedef struct subseg_map_struct
11040 float total_freq
; /* fall-through + branch target frequency */
11041 float target_freq
; /* branch target frequency alone */
11043 struct subseg_map_struct
*next
;
11047 static subseg_map
*sseg_map
= NULL
;
11049 static subseg_map
*
11050 get_subseg_info (segT seg
, subsegT subseg
)
11052 subseg_map
*subseg_e
;
11054 for (subseg_e
= sseg_map
; subseg_e
; subseg_e
= subseg_e
->next
)
11056 if (seg
== subseg_e
->seg
&& subseg
== subseg_e
->subseg
)
11063 static subseg_map
*
11064 add_subseg_info (segT seg
, subsegT subseg
)
11066 subseg_map
*subseg_e
= XNEW (subseg_map
);
11067 memset (subseg_e
, 0, sizeof (subseg_map
));
11068 subseg_e
->seg
= seg
;
11069 subseg_e
->subseg
= subseg
;
11070 subseg_e
->flags
= 0;
11071 /* Start off considering every branch target very important. */
11072 subseg_e
->target_freq
= 1.0;
11073 subseg_e
->total_freq
= 1.0;
11074 subseg_e
->next
= sseg_map
;
11075 sseg_map
= subseg_e
;
11081 get_last_insn_flags (segT seg
, subsegT subseg
)
11083 subseg_map
*subseg_e
= get_subseg_info (seg
, subseg
);
11085 return subseg_e
->flags
;
11091 set_last_insn_flags (segT seg
,
11096 subseg_map
*subseg_e
= get_subseg_info (seg
, subseg
);
11098 subseg_e
= add_subseg_info (seg
, subseg
);
11100 subseg_e
->flags
|= fl
;
11102 subseg_e
->flags
&= ~fl
;
11107 get_subseg_total_freq (segT seg
, subsegT subseg
)
11109 subseg_map
*subseg_e
= get_subseg_info (seg
, subseg
);
11111 return subseg_e
->total_freq
;
11117 get_subseg_target_freq (segT seg
, subsegT subseg
)
11119 subseg_map
*subseg_e
= get_subseg_info (seg
, subseg
);
11121 return subseg_e
->target_freq
;
11127 set_subseg_freq (segT seg
, subsegT subseg
, float total_f
, float target_f
)
11129 subseg_map
*subseg_e
= get_subseg_info (seg
, subseg
);
11131 subseg_e
= add_subseg_info (seg
, subseg
);
11132 subseg_e
->total_freq
= total_f
;
11133 subseg_e
->target_freq
= target_f
;
11137 /* Segment Lists and emit_state Stuff. */
11140 xtensa_move_seg_list_to_beginning (seg_list
*head
)
11145 segT literal_section
= head
->seg
;
11147 /* Move the literal section to the front of the section list. */
11148 gas_assert (literal_section
);
11149 if (literal_section
!= stdoutput
->sections
)
11151 bfd_section_list_remove (stdoutput
, literal_section
);
11152 bfd_section_list_prepend (stdoutput
, literal_section
);
11159 static void mark_literal_frags (seg_list
*);
11162 xg_promote_candidate_litpool (struct litpool_seg
*lps
,
11163 struct litpool_frag
*lp
)
11168 char label
[10 + 2 * sizeof (fragS
*)];
11170 poolbeg
= lp
->fragP
;
11172 poolbeg
->fr_subtype
= RELAX_LITERAL_POOL_BEGIN
;
11173 poolend
= poolbeg
->fr_next
;
11174 gas_assert (poolend
->fr_type
== rs_machine_dependent
&&
11175 poolend
->fr_subtype
== RELAX_LITERAL_POOL_END
);
11176 /* Create a local symbol pointing to the
11177 end of the pool. */
11178 sprintf (label
, ".L0_LT_%p", poolbeg
);
11179 lsym
= (symbolS
*)local_symbol_make (label
, lps
->seg
,
11181 poolbeg
->fr_symbol
= lsym
;
11182 /* Rest is done in xtensa_relax_frag. */
11186 xtensa_move_literals (void)
11189 frchainS
*frchain_from
, *frchain_to
;
11190 fragS
*search_frag
, *next_frag
, *literal_pool
, *insert_after
;
11191 fragS
**frag_splice
;
11194 fixS
*fix
, *next_fix
, **fix_splice
;
11196 struct litpool_seg
*lps
;
11197 const char *init_name
= INIT_SECTION_NAME
;
11198 const char *fini_name
= FINI_SECTION_NAME
;
11199 int init_name_len
= strlen(init_name
);
11200 int fini_name_len
= strlen(fini_name
);
11202 mark_literal_frags (literal_head
->next
);
11204 if (use_literal_section
)
11207 /* Assign addresses (rough estimates) to the potential literal pool locations
11208 and create new ones if the gaps are too large. */
11210 for (lps
= litpool_seg_list
.next
; lps
; lps
= lps
->next
)
11212 frchainS
*frchP
= seg_info (lps
->seg
)->frchainP
;
11213 struct litpool_frag
*lpf
= lps
->frag_list
.next
;
11216 for ( ; frchP
; frchP
= frchP
->frch_next
)
11219 for (fragP
= frchP
->frch_root
; fragP
; fragP
= fragP
->fr_next
)
11221 if (lpf
&& fragP
== lpf
->fragP
)
11223 gas_assert(fragP
->fr_type
== rs_machine_dependent
&&
11224 (fragP
->fr_subtype
== RELAX_LITERAL_POOL_BEGIN
||
11225 fragP
->fr_subtype
== RELAX_LITERAL_POOL_CANDIDATE_BEGIN
));
11226 /* Found a litpool location. */
11230 if (fragP
->fr_type
== rs_machine_dependent
&&
11231 fragP
->fr_subtype
== RELAX_SLOTS
)
11234 for (slot
= 0; slot
< MAX_SLOTS
; slot
++)
11236 if (fragP
->tc_frag_data
.literal_frags
[slot
])
11238 /* L32R; point its literal to the nearest litpool
11239 preferring non-"candidate" positions to avoid
11240 the jump-around. */
11241 fragS
*litfrag
= fragP
->tc_frag_data
.literal_frags
[slot
];
11242 struct litpool_frag
*lp
= lpf
->prev
;
11247 while (lp
->fragP
->fr_subtype
==
11248 RELAX_LITERAL_POOL_CANDIDATE_BEGIN
)
11251 if (lp
->fragP
== NULL
)
11253 /* End of list; have to bite the bullet.
11254 Take the nearest. */
11258 /* Does it (conservatively) reach? */
11259 if (addr
- lp
->addr
<= 128 * 1024)
11261 if (lp
->fragP
->fr_subtype
== RELAX_LITERAL_POOL_BEGIN
)
11263 /* Found a good one. */
11266 else if (lp
->prev
->fragP
&&
11267 addr
- lp
->prev
->addr
> 128 * 1024)
11269 /* This is still a "candidate" but the next one
11270 will be too far away, so revert to the nearest
11271 one, convert it and add the jump around. */
11278 /* Convert candidate and add the jump around. */
11279 if (lp
->fragP
->fr_subtype
==
11280 RELAX_LITERAL_POOL_CANDIDATE_BEGIN
)
11281 xg_promote_candidate_litpool (lps
, lp
);
11283 if (! litfrag
->tc_frag_data
.literal_frag
)
11285 /* Take earliest use of this literal to avoid
11287 litfrag
->tc_frag_data
.literal_frag
= lp
->fragP
;
11292 addr
+= fragP
->fr_fix
;
11293 if (fragP
->fr_type
== rs_fill
)
11294 addr
+= fragP
->fr_offset
;
11299 for (segment
= literal_head
->next
; segment
; segment
= segment
->next
)
11301 const char *seg_name
= segment_name (segment
->seg
);
11303 /* Keep the literals for .init and .fini in separate sections. */
11304 if ((!memcmp (seg_name
, init_name
, init_name_len
) &&
11305 !strcmp (seg_name
+ init_name_len
, ".literal")) ||
11306 (!memcmp (seg_name
, fini_name
, fini_name_len
) &&
11307 !strcmp (seg_name
+ fini_name_len
, ".literal")))
11310 frchain_from
= seg_info (segment
->seg
)->frchainP
;
11311 search_frag
= frchain_from
->frch_root
;
11312 literal_pool
= NULL
;
11314 frag_splice
= &(frchain_from
->frch_root
);
11316 while (search_frag
&& !search_frag
->tc_frag_data
.literal_frag
)
11318 gas_assert (search_frag
->fr_fix
== 0
11319 || search_frag
->fr_type
== rs_align
);
11320 search_frag
= search_frag
->fr_next
;
11325 search_frag
= frchain_from
->frch_root
;
11326 as_bad_where (search_frag
->fr_file
, search_frag
->fr_line
,
11327 _("literal pool location required for text-section-literals; specify with .literal_position"));
11331 gas_assert (search_frag
->tc_frag_data
.literal_frag
->fr_subtype
11332 == RELAX_LITERAL_POOL_BEGIN
);
11333 xtensa_switch_section_emit_state (&state
, segment
->seg
, 0);
11335 /* Make sure that all the frags in this series are closed, and
11336 that there is at least one left over of zero-size. This
11337 prevents us from making a segment with an frchain without any
11339 frag_variant (rs_fill
, 0, 0, 0, NULL
, 0, NULL
);
11340 xtensa_set_frag_assembly_state (frag_now
);
11341 frag_variant (rs_fill
, 0, 0, 0, NULL
, 0, NULL
);
11342 xtensa_set_frag_assembly_state (frag_now
);
11344 while (search_frag
!= frag_now
)
11346 next_frag
= search_frag
->fr_next
;
11347 if (search_frag
->tc_frag_data
.literal_frag
)
11349 literal_pool
= search_frag
->tc_frag_data
.literal_frag
;
11350 gas_assert (literal_pool
->fr_subtype
== RELAX_LITERAL_POOL_BEGIN
);
11351 frchain_to
= literal_pool
->tc_frag_data
.lit_frchain
;
11352 gas_assert (frchain_to
);
11355 if (search_frag
->fr_type
== rs_fill
&& search_frag
->fr_fix
== 0)
11357 /* Skip empty fill frags. */
11358 *frag_splice
= next_frag
;
11359 search_frag
= next_frag
;
11363 if (search_frag
->fr_type
== rs_align
)
11365 /* Skip alignment frags, because the pool as a whole will be
11366 aligned if used, and we don't want to force alignment if the
11368 *frag_splice
= next_frag
;
11369 search_frag
= next_frag
;
11373 /* First, move the frag out of the literal section and
11374 to the appropriate place. */
11376 /* Insert an alignment frag at start of pool. */
11377 if (literal_pool
->fr_next
->fr_type
== rs_machine_dependent
&&
11378 literal_pool
->fr_next
->fr_subtype
== RELAX_LITERAL_POOL_END
)
11380 segT pool_seg
= literal_pool
->fr_next
->tc_frag_data
.lit_seg
;
11381 emit_state prev_state
;
11384 xtensa_switch_section_emit_state (&prev_state
, pool_seg
, 0);
11385 prev_frag
= frag_now
;
11386 frag_variant (rs_fill
, 0, 0, 0, NULL
, 0, NULL
);
11387 align_frag
= frag_now
;
11388 frag_align (2, 0, 0);
11389 /* Splice it into the right place. */
11390 prev_frag
->fr_next
= align_frag
->fr_next
;
11391 align_frag
->fr_next
= literal_pool
->fr_next
;
11392 literal_pool
->fr_next
= align_frag
;
11393 /* Insert after this one. */
11394 literal_pool
->tc_frag_data
.literal_frag
= align_frag
;
11395 xtensa_restore_emit_state (&prev_state
);
11397 insert_after
= literal_pool
->tc_frag_data
.literal_frag
;
11398 dest_seg
= insert_after
->fr_next
->tc_frag_data
.lit_seg
;
11399 /* Skip align frag. */
11400 if (insert_after
->fr_next
->fr_type
== rs_align
)
11402 insert_after
= insert_after
->fr_next
;
11405 *frag_splice
= next_frag
;
11406 search_frag
->fr_next
= insert_after
->fr_next
;
11407 insert_after
->fr_next
= search_frag
;
11408 search_frag
->tc_frag_data
.lit_seg
= dest_seg
;
11409 literal_pool
->tc_frag_data
.literal_frag
= search_frag
;
11411 /* Now move any fixups associated with this frag to the
11413 fix
= frchain_from
->fix_root
;
11414 fix_splice
= &(frchain_from
->fix_root
);
11417 next_fix
= fix
->fx_next
;
11418 if (fix
->fx_frag
== search_frag
)
11420 *fix_splice
= next_fix
;
11421 fix
->fx_next
= frchain_to
->fix_root
;
11422 frchain_to
->fix_root
= fix
;
11423 if (frchain_to
->fix_tail
== NULL
)
11424 frchain_to
->fix_tail
= fix
;
11427 fix_splice
= &(fix
->fx_next
);
11430 search_frag
= next_frag
;
11433 if (frchain_from
->fix_root
!= NULL
)
11435 frchain_from
= seg_info (segment
->seg
)->frchainP
;
11436 as_warn (_("fixes not all moved from %s"), segment
->seg
->name
);
11438 gas_assert (frchain_from
->fix_root
== NULL
);
11440 frchain_from
->fix_tail
= NULL
;
11441 xtensa_restore_emit_state (&state
);
11444 /* Now fix up the SEGMENT value for all the literal symbols. */
11445 for (lit
= literal_syms
; lit
; lit
= lit
->next
)
11447 symbolS
*lit_sym
= lit
->sym
;
11448 segT dseg
= symbol_get_frag (lit_sym
)->tc_frag_data
.lit_seg
;
11450 S_SET_SEGMENT (lit_sym
, dseg
);
11455 /* Walk over all the frags for segments in a list and mark them as
11456 containing literals. As clunky as this is, we can't rely on frag_var
11457 and frag_variant to get called in all situations. */
11460 mark_literal_frags (seg_list
*segment
)
11462 frchainS
*frchain_from
;
11463 fragS
*search_frag
;
11467 frchain_from
= seg_info (segment
->seg
)->frchainP
;
11468 search_frag
= frchain_from
->frch_root
;
11469 while (search_frag
)
11471 search_frag
->tc_frag_data
.is_literal
= TRUE
;
11472 search_frag
= search_frag
->fr_next
;
11474 segment
= segment
->next
;
11480 xtensa_reorder_seg_list (seg_list
*head
, segT after
)
11482 /* Move all of the sections in the section list to come
11483 after "after" in the gnu segment list. */
11488 segT literal_section
= head
->seg
;
11490 /* Move the literal section after "after". */
11491 gas_assert (literal_section
);
11492 if (literal_section
!= after
)
11494 bfd_section_list_remove (stdoutput
, literal_section
);
11495 bfd_section_list_insert_after (stdoutput
, after
, literal_section
);
11503 /* Push all the literal segments to the end of the gnu list. */
11506 xtensa_reorder_segments (void)
11513 for (sec
= stdoutput
->sections
; sec
!= NULL
; sec
= sec
->next
)
11519 /* Now that we have the last section, push all the literal
11520 sections to the end. */
11521 xtensa_reorder_seg_list (literal_head
, last_sec
);
11523 /* Now perform the final error check. */
11524 for (sec
= stdoutput
->sections
; sec
!= NULL
; sec
= sec
->next
)
11526 gas_assert (new_count
== old_count
);
11530 /* Change the emit state (seg, subseg, and frag related stuff) to the
11531 correct location. Return a emit_state which can be passed to
11532 xtensa_restore_emit_state to return to current fragment. */
11535 xtensa_switch_to_literal_fragment (emit_state
*result
)
11537 if (directive_state
[directive_absolute_literals
])
11539 segT lit4_seg
= cache_literal_section (TRUE
);
11540 xtensa_switch_section_emit_state (result
, lit4_seg
, 0);
11543 xtensa_switch_to_non_abs_literal_fragment (result
);
11545 /* Do a 4-byte align here. */
11546 frag_align (2, 0, 0);
11547 record_alignment (now_seg
, 2);
11552 xtensa_switch_to_non_abs_literal_fragment (emit_state
*result
)
11554 fragS
*pool_location
= get_literal_pool_location (now_seg
);
11556 bfd_boolean is_init
=
11557 (now_seg
&& !strcmp (segment_name (now_seg
), INIT_SECTION_NAME
));
11558 bfd_boolean is_fini
=
11559 (now_seg
&& !strcmp (segment_name (now_seg
), FINI_SECTION_NAME
));
11561 if (pool_location
== NULL
11562 && !use_literal_section
11563 && !is_init
&& ! is_fini
)
11565 if (!auto_litpools
)
11567 as_bad (_("literal pool location required for text-section-literals; specify with .literal_position"));
11569 xtensa_maybe_create_literal_pool_frag (TRUE
, TRUE
);
11570 pool_location
= get_literal_pool_location (now_seg
);
11573 lit_seg
= cache_literal_section (FALSE
);
11574 xtensa_switch_section_emit_state (result
, lit_seg
, 0);
11576 if (!use_literal_section
11577 && !is_init
&& !is_fini
11578 && get_literal_pool_location (now_seg
) != pool_location
)
11580 /* Close whatever frag is there. */
11581 frag_variant (rs_fill
, 0, 0, 0, NULL
, 0, NULL
);
11582 xtensa_set_frag_assembly_state (frag_now
);
11583 frag_now
->tc_frag_data
.literal_frag
= pool_location
;
11584 frag_variant (rs_fill
, 0, 0, 0, NULL
, 0, NULL
);
11585 xtensa_set_frag_assembly_state (frag_now
);
11590 /* Call this function before emitting data into the literal section.
11591 This is a helper function for xtensa_switch_to_literal_fragment.
11592 This is similar to a .section new_now_seg subseg. */
11595 xtensa_switch_section_emit_state (emit_state
*state
,
11597 subsegT new_now_subseg
)
11599 state
->name
= now_seg
->name
;
11600 state
->now_seg
= now_seg
;
11601 state
->now_subseg
= now_subseg
;
11602 state
->generating_literals
= generating_literals
;
11603 generating_literals
++;
11604 subseg_set (new_now_seg
, new_now_subseg
);
11608 /* Use to restore the emitting into the normal place. */
11611 xtensa_restore_emit_state (emit_state
*state
)
11613 generating_literals
= state
->generating_literals
;
11614 subseg_set (state
->now_seg
, state
->now_subseg
);
11618 /* Predicate function used to look up a section in a particular group. */
11621 match_section_group (bfd
*abfd ATTRIBUTE_UNUSED
, asection
*sec
, void *inf
)
11623 const char *gname
= inf
;
11624 const char *group_name
= elf_group_name (sec
);
11626 return (group_name
== gname
11627 || (group_name
!= NULL
11629 && strcmp (group_name
, gname
) == 0));
11633 /* Get the literal section to be used for the current text section.
11634 The result may be cached in the default_lit_sections structure. */
11637 cache_literal_section (bfd_boolean use_abs_literals
)
11639 const char *text_name
, *group_name
= 0;
11640 const char *base_name
, *suffix
;
11643 segT seg
, current_section
;
11644 int current_subsec
;
11645 bfd_boolean linkonce
= FALSE
;
11647 /* Save the current section/subsection. */
11648 current_section
= now_seg
;
11649 current_subsec
= now_subseg
;
11651 /* Clear the cached values if they are no longer valid. */
11652 if (now_seg
!= default_lit_sections
.current_text_seg
)
11654 default_lit_sections
.current_text_seg
= now_seg
;
11655 default_lit_sections
.lit_seg
= NULL
;
11656 default_lit_sections
.lit4_seg
= NULL
;
11659 /* Check if the literal section is already cached. */
11660 if (use_abs_literals
)
11661 pcached
= &default_lit_sections
.lit4_seg
;
11663 pcached
= &default_lit_sections
.lit_seg
;
11668 text_name
= default_lit_sections
.lit_prefix
;
11669 if (! text_name
|| ! *text_name
)
11671 text_name
= segment_name (current_section
);
11672 group_name
= elf_group_name (current_section
);
11673 linkonce
= (current_section
->flags
& SEC_LINK_ONCE
) != 0;
11676 base_name
= use_abs_literals
? ".lit4" : ".literal";
11679 name
= concat (base_name
, ".", group_name
, (char *) NULL
);
11681 else if (strncmp (text_name
, ".gnu.linkonce.", linkonce_len
) == 0)
11683 suffix
= strchr (text_name
+ linkonce_len
, '.');
11685 name
= concat (".gnu.linkonce", base_name
, suffix
? suffix
: "",
11691 /* If the section name begins or ends with ".text", then replace
11692 that portion instead of appending an additional suffix. */
11693 size_t len
= strlen (text_name
);
11695 && (strcmp (text_name
+ len
- 5, ".text") == 0
11696 || strncmp (text_name
, ".text", 5) == 0))
11699 name
= XNEWVEC (char, len
+ strlen (base_name
) + 1);
11700 if (strncmp (text_name
, ".text", 5) == 0)
11702 strcpy (name
, base_name
);
11703 strcat (name
, text_name
+ 5);
11707 strcpy (name
, text_name
);
11708 strcpy (name
+ len
, base_name
);
11712 /* Canonicalize section names to allow renaming literal sections.
11713 The group name, if any, came from the current text section and
11714 has already been canonicalized. */
11715 name
= tc_canonicalize_symbol_name (name
);
11717 seg
= bfd_get_section_by_name_if (stdoutput
, name
, match_section_group
,
11718 (void *) group_name
);
11723 seg
= subseg_force_new (name
, 0);
11725 if (! use_abs_literals
)
11727 /* Add the newly created literal segment to the list. */
11728 seg_list
*n
= XNEW (seg_list
);
11730 n
->next
= literal_head
->next
;
11731 literal_head
->next
= n
;
11734 flags
= (SEC_HAS_CONTENTS
| SEC_READONLY
| SEC_ALLOC
| SEC_LOAD
11735 | (linkonce
? (SEC_LINK_ONCE
| SEC_LINK_DUPLICATES_DISCARD
) : 0)
11736 | (use_abs_literals
? SEC_DATA
: SEC_CODE
));
11738 elf_group_name (seg
) = group_name
;
11740 bfd_set_section_flags (stdoutput
, seg
, flags
);
11741 bfd_set_section_alignment (stdoutput
, seg
, 2);
11745 subseg_set (current_section
, current_subsec
);
11750 /* Property Tables Stuff. */
11752 #define XTENSA_INSN_SEC_NAME ".xt.insn"
11753 #define XTENSA_LIT_SEC_NAME ".xt.lit"
11754 #define XTENSA_PROP_SEC_NAME ".xt.prop"
11756 typedef bfd_boolean (*frag_predicate
) (const fragS
*);
11757 typedef void (*frag_flags_fn
) (const fragS
*, frag_flags
*);
11759 static bfd_boolean
get_frag_is_literal (const fragS
*);
11760 static void xtensa_create_property_segments
11761 (frag_predicate
, frag_predicate
, const char *, xt_section_type
);
11762 static void xtensa_create_xproperty_segments
11763 (frag_flags_fn
, const char *, xt_section_type
);
11764 static bfd_boolean
exclude_section_from_property_tables (segT
);
11765 static bfd_boolean
section_has_property (segT
, frag_predicate
);
11766 static bfd_boolean
section_has_xproperty (segT
, frag_flags_fn
);
11767 static void add_xt_block_frags
11768 (segT
, xtensa_block_info
**, frag_predicate
, frag_predicate
);
11769 static bfd_boolean
xtensa_frag_flags_is_empty (const frag_flags
*);
11770 static void xtensa_frag_flags_init (frag_flags
*);
11771 static void get_frag_property_flags (const fragS
*, frag_flags
*);
11772 static flagword
frag_flags_to_number (const frag_flags
*);
11773 static void add_xt_prop_frags (segT
, xtensa_block_info
**, frag_flags_fn
);
11775 /* Set up property tables after relaxation. */
11778 xtensa_post_relax_hook (void)
11780 xtensa_move_seg_list_to_beginning (literal_head
);
11782 xtensa_find_unmarked_state_frags ();
11783 xtensa_mark_frags_for_org ();
11784 xtensa_mark_difference_of_two_symbols ();
11786 xtensa_create_property_segments (get_frag_is_literal
,
11788 XTENSA_LIT_SEC_NAME
,
11790 xtensa_create_xproperty_segments (get_frag_property_flags
,
11791 XTENSA_PROP_SEC_NAME
,
11794 if (warn_unaligned_branch_targets
)
11795 bfd_map_over_sections (stdoutput
, xtensa_find_unaligned_branch_targets
, 0);
11796 bfd_map_over_sections (stdoutput
, xtensa_find_unaligned_loops
, 0);
11800 /* This function is only meaningful after xtensa_move_literals. */
11803 get_frag_is_literal (const fragS
*fragP
)
11805 gas_assert (fragP
!= NULL
);
11806 return fragP
->tc_frag_data
.is_literal
;
11811 xtensa_create_property_segments (frag_predicate property_function
,
11812 frag_predicate end_property_function
,
11813 const char *section_name_base
,
11814 xt_section_type sec_type
)
11818 /* Walk over all of the current segments.
11819 Walk over each fragment
11820 For each non-empty fragment,
11821 Build a property record (append where possible). */
11823 for (seclist
= &stdoutput
->sections
;
11824 seclist
&& *seclist
;
11825 seclist
= &(*seclist
)->next
)
11827 segT sec
= *seclist
;
11829 if (exclude_section_from_property_tables (sec
))
11832 if (section_has_property (sec
, property_function
))
11834 segment_info_type
*xt_seg_info
;
11835 xtensa_block_info
**xt_blocks
;
11836 segT prop_sec
= xtensa_make_property_section (sec
, section_name_base
);
11838 prop_sec
->output_section
= prop_sec
;
11839 subseg_set (prop_sec
, 0);
11840 xt_seg_info
= seg_info (prop_sec
);
11841 xt_blocks
= &xt_seg_info
->tc_segment_info_data
.blocks
[sec_type
];
11843 /* Walk over all of the frchains here and add new sections. */
11844 add_xt_block_frags (sec
, xt_blocks
, property_function
,
11845 end_property_function
);
11849 /* Now we fill them out.... */
11851 for (seclist
= &stdoutput
->sections
;
11852 seclist
&& *seclist
;
11853 seclist
= &(*seclist
)->next
)
11855 segment_info_type
*seginfo
;
11856 xtensa_block_info
*block
;
11857 segT sec
= *seclist
;
11859 seginfo
= seg_info (sec
);
11860 block
= seginfo
->tc_segment_info_data
.blocks
[sec_type
];
11864 xtensa_block_info
*cur_block
;
11866 bfd_size_type rec_size
;
11868 for (cur_block
= block
; cur_block
; cur_block
= cur_block
->next
)
11871 rec_size
= num_recs
* 8;
11872 bfd_set_section_size (stdoutput
, sec
, rec_size
);
11879 subseg_set (sec
, 0);
11880 frag_data
= frag_more (rec_size
);
11882 for (i
= 0; i
< num_recs
; i
++)
11886 /* Write the fixup. */
11887 gas_assert (cur_block
);
11888 fix
= fix_new (frag_now
, i
* 8, 4,
11889 section_symbol (cur_block
->sec
),
11891 FALSE
, BFD_RELOC_32
);
11892 fix
->fx_file
= "<internal>";
11895 /* Write the length. */
11896 md_number_to_chars (&frag_data
[4 + i
* 8],
11897 cur_block
->size
, 4);
11898 cur_block
= cur_block
->next
;
11900 frag_wane (frag_now
);
11902 frag_wane (frag_now
);
11910 xtensa_create_xproperty_segments (frag_flags_fn flag_fn
,
11911 const char *section_name_base
,
11912 xt_section_type sec_type
)
11916 /* Walk over all of the current segments.
11917 Walk over each fragment.
11918 For each fragment that has instructions,
11919 build an instruction record (append where possible). */
11921 for (seclist
= &stdoutput
->sections
;
11922 seclist
&& *seclist
;
11923 seclist
= &(*seclist
)->next
)
11925 segT sec
= *seclist
;
11927 if (exclude_section_from_property_tables (sec
))
11930 if (section_has_xproperty (sec
, flag_fn
))
11932 segment_info_type
*xt_seg_info
;
11933 xtensa_block_info
**xt_blocks
;
11934 segT prop_sec
= xtensa_make_property_section (sec
, section_name_base
);
11936 prop_sec
->output_section
= prop_sec
;
11937 subseg_set (prop_sec
, 0);
11938 xt_seg_info
= seg_info (prop_sec
);
11939 xt_blocks
= &xt_seg_info
->tc_segment_info_data
.blocks
[sec_type
];
11941 /* Walk over all of the frchains here and add new sections. */
11942 add_xt_prop_frags (sec
, xt_blocks
, flag_fn
);
11946 /* Now we fill them out.... */
11948 for (seclist
= &stdoutput
->sections
;
11949 seclist
&& *seclist
;
11950 seclist
= &(*seclist
)->next
)
11952 segment_info_type
*seginfo
;
11953 xtensa_block_info
*block
;
11954 segT sec
= *seclist
;
11956 seginfo
= seg_info (sec
);
11957 block
= seginfo
->tc_segment_info_data
.blocks
[sec_type
];
11961 xtensa_block_info
*cur_block
;
11963 bfd_size_type rec_size
;
11965 for (cur_block
= block
; cur_block
; cur_block
= cur_block
->next
)
11968 rec_size
= num_recs
* (8 + 4);
11969 bfd_set_section_size (stdoutput
, sec
, rec_size
);
11970 /* elf_section_data (sec)->this_hdr.sh_entsize = 12; */
11977 subseg_set (sec
, 0);
11978 frag_data
= frag_more (rec_size
);
11980 for (i
= 0; i
< num_recs
; i
++)
11984 /* Write the fixup. */
11985 gas_assert (cur_block
);
11986 fix
= fix_new (frag_now
, i
* 12, 4,
11987 section_symbol (cur_block
->sec
),
11989 FALSE
, BFD_RELOC_32
);
11990 fix
->fx_file
= "<internal>";
11993 /* Write the length. */
11994 md_number_to_chars (&frag_data
[4 + i
* 12],
11995 cur_block
->size
, 4);
11996 md_number_to_chars (&frag_data
[8 + i
* 12],
11997 frag_flags_to_number (&cur_block
->flags
),
11998 sizeof (flagword
));
11999 cur_block
= cur_block
->next
;
12001 frag_wane (frag_now
);
12003 frag_wane (frag_now
);
12011 exclude_section_from_property_tables (segT sec
)
12013 flagword flags
= bfd_get_section_flags (stdoutput
, sec
);
12015 /* Sections that don't contribute to the memory footprint are excluded. */
12016 if ((flags
& SEC_DEBUGGING
)
12017 || !(flags
& SEC_ALLOC
)
12018 || (flags
& SEC_MERGE
))
12021 /* Linker cie and fde optimizations mess up property entries for
12022 eh_frame sections, but there is nothing inside them relevant to
12023 property tables anyway. */
12024 if (strcmp (sec
->name
, ".eh_frame") == 0)
12032 section_has_property (segT sec
, frag_predicate property_function
)
12034 segment_info_type
*seginfo
= seg_info (sec
);
12037 if (seginfo
&& seginfo
->frchainP
)
12039 for (fragP
= seginfo
->frchainP
->frch_root
; fragP
; fragP
= fragP
->fr_next
)
12041 if (property_function (fragP
)
12042 && (fragP
->fr_type
!= rs_fill
|| fragP
->fr_fix
!= 0))
12051 section_has_xproperty (segT sec
, frag_flags_fn property_function
)
12053 segment_info_type
*seginfo
= seg_info (sec
);
12056 if (seginfo
&& seginfo
->frchainP
)
12058 for (fragP
= seginfo
->frchainP
->frch_root
; fragP
; fragP
= fragP
->fr_next
)
12060 frag_flags prop_flags
;
12061 property_function (fragP
, &prop_flags
);
12062 if (!xtensa_frag_flags_is_empty (&prop_flags
))
12070 /* Two types of block sections exist right now: literal and insns. */
12073 add_xt_block_frags (segT sec
,
12074 xtensa_block_info
**xt_block
,
12075 frag_predicate property_function
,
12076 frag_predicate end_property_function
)
12080 /* Build it if needed. */
12081 while (*xt_block
!= NULL
)
12082 xt_block
= &(*xt_block
)->next
;
12083 /* We are either at NULL at the beginning or at the end. */
12085 /* Walk through the frags. */
12086 if (seg_info (sec
)->frchainP
)
12088 for (fragP
= seg_info (sec
)->frchainP
->frch_root
;
12090 fragP
= fragP
->fr_next
)
12092 if (property_function (fragP
)
12093 && (fragP
->fr_type
!= rs_fill
|| fragP
->fr_fix
!= 0))
12095 if (*xt_block
!= NULL
)
12097 if ((*xt_block
)->offset
+ (*xt_block
)->size
12098 == fragP
->fr_address
)
12099 (*xt_block
)->size
+= fragP
->fr_fix
;
12101 xt_block
= &((*xt_block
)->next
);
12103 if (*xt_block
== NULL
)
12105 xtensa_block_info
*new_block
= XNEW (xtensa_block_info
);
12106 new_block
->sec
= sec
;
12107 new_block
->offset
= fragP
->fr_address
;
12108 new_block
->size
= fragP
->fr_fix
;
12109 new_block
->next
= NULL
;
12110 xtensa_frag_flags_init (&new_block
->flags
);
12111 *xt_block
= new_block
;
12113 if (end_property_function
12114 && end_property_function (fragP
))
12116 xt_block
= &((*xt_block
)->next
);
12124 /* Break the encapsulation of add_xt_prop_frags here. */
12127 xtensa_frag_flags_is_empty (const frag_flags
*prop_flags
)
12129 if (prop_flags
->is_literal
12130 || prop_flags
->is_insn
12131 || prop_flags
->is_data
12132 || prop_flags
->is_unreachable
)
12139 xtensa_frag_flags_init (frag_flags
*prop_flags
)
12141 memset (prop_flags
, 0, sizeof (frag_flags
));
12146 get_frag_property_flags (const fragS
*fragP
, frag_flags
*prop_flags
)
12148 xtensa_frag_flags_init (prop_flags
);
12149 if (fragP
->tc_frag_data
.is_literal
)
12150 prop_flags
->is_literal
= TRUE
;
12151 if (fragP
->tc_frag_data
.is_specific_opcode
12152 || fragP
->tc_frag_data
.is_no_transform
)
12154 prop_flags
->is_no_transform
= TRUE
;
12155 if (xtensa_frag_flags_is_empty (prop_flags
))
12156 prop_flags
->is_data
= TRUE
;
12158 if (fragP
->tc_frag_data
.is_unreachable
)
12159 prop_flags
->is_unreachable
= TRUE
;
12160 else if (fragP
->tc_frag_data
.is_insn
)
12162 prop_flags
->is_insn
= TRUE
;
12163 if (fragP
->tc_frag_data
.is_loop_target
)
12164 prop_flags
->insn
.is_loop_target
= TRUE
;
12165 if (fragP
->tc_frag_data
.is_branch_target
)
12166 prop_flags
->insn
.is_branch_target
= TRUE
;
12167 if (fragP
->tc_frag_data
.is_no_density
)
12168 prop_flags
->insn
.is_no_density
= TRUE
;
12169 if (fragP
->tc_frag_data
.use_absolute_literals
)
12170 prop_flags
->insn
.is_abslit
= TRUE
;
12172 if (fragP
->tc_frag_data
.is_align
)
12174 prop_flags
->is_align
= TRUE
;
12175 prop_flags
->alignment
= fragP
->tc_frag_data
.alignment
;
12176 if (xtensa_frag_flags_is_empty (prop_flags
))
12177 prop_flags
->is_data
= TRUE
;
12183 frag_flags_to_number (const frag_flags
*prop_flags
)
12186 if (prop_flags
->is_literal
)
12187 num
|= XTENSA_PROP_LITERAL
;
12188 if (prop_flags
->is_insn
)
12189 num
|= XTENSA_PROP_INSN
;
12190 if (prop_flags
->is_data
)
12191 num
|= XTENSA_PROP_DATA
;
12192 if (prop_flags
->is_unreachable
)
12193 num
|= XTENSA_PROP_UNREACHABLE
;
12194 if (prop_flags
->insn
.is_loop_target
)
12195 num
|= XTENSA_PROP_INSN_LOOP_TARGET
;
12196 if (prop_flags
->insn
.is_branch_target
)
12198 num
|= XTENSA_PROP_INSN_BRANCH_TARGET
;
12199 num
= SET_XTENSA_PROP_BT_ALIGN (num
, prop_flags
->insn
.bt_align_priority
);
12202 if (prop_flags
->insn
.is_no_density
)
12203 num
|= XTENSA_PROP_INSN_NO_DENSITY
;
12204 if (prop_flags
->is_no_transform
)
12205 num
|= XTENSA_PROP_NO_TRANSFORM
;
12206 if (prop_flags
->insn
.is_no_reorder
)
12207 num
|= XTENSA_PROP_INSN_NO_REORDER
;
12208 if (prop_flags
->insn
.is_abslit
)
12209 num
|= XTENSA_PROP_INSN_ABSLIT
;
12211 if (prop_flags
->is_align
)
12213 num
|= XTENSA_PROP_ALIGN
;
12214 num
= SET_XTENSA_PROP_ALIGNMENT (num
, prop_flags
->alignment
);
12222 xtensa_frag_flags_combinable (const frag_flags
*prop_flags_1
,
12223 const frag_flags
*prop_flags_2
)
12225 /* Cannot combine with an end marker. */
12227 if (prop_flags_1
->is_literal
!= prop_flags_2
->is_literal
)
12229 if (prop_flags_1
->is_insn
!= prop_flags_2
->is_insn
)
12231 if (prop_flags_1
->is_data
!= prop_flags_2
->is_data
)
12234 if (prop_flags_1
->is_insn
)
12236 /* Properties of the beginning of the frag. */
12237 if (prop_flags_2
->insn
.is_loop_target
)
12239 if (prop_flags_2
->insn
.is_branch_target
)
12241 if (prop_flags_1
->insn
.is_no_density
!=
12242 prop_flags_2
->insn
.is_no_density
)
12244 if (prop_flags_1
->is_no_transform
!=
12245 prop_flags_2
->is_no_transform
)
12247 if (prop_flags_1
->insn
.is_no_reorder
!=
12248 prop_flags_2
->insn
.is_no_reorder
)
12250 if (prop_flags_1
->insn
.is_abslit
!=
12251 prop_flags_2
->insn
.is_abslit
)
12255 if (prop_flags_1
->is_align
)
12263 xt_block_aligned_size (const xtensa_block_info
*xt_block
)
12266 unsigned align_bits
;
12268 if (!xt_block
->flags
.is_align
)
12269 return xt_block
->size
;
12271 end_addr
= xt_block
->offset
+ xt_block
->size
;
12272 align_bits
= xt_block
->flags
.alignment
;
12273 end_addr
= ((end_addr
+ ((1 << align_bits
) -1)) >> align_bits
) << align_bits
;
12274 return end_addr
- xt_block
->offset
;
12279 xtensa_xt_block_combine (xtensa_block_info
*xt_block
,
12280 const xtensa_block_info
*xt_block_2
)
12282 if (xt_block
->sec
!= xt_block_2
->sec
)
12284 if (xt_block
->offset
+ xt_block_aligned_size (xt_block
)
12285 != xt_block_2
->offset
)
12288 if (xt_block_2
->size
== 0
12289 && (!xt_block_2
->flags
.is_unreachable
12290 || xt_block
->flags
.is_unreachable
))
12292 if (xt_block_2
->flags
.is_align
12293 && xt_block
->flags
.is_align
)
12295 /* Nothing needed. */
12296 if (xt_block
->flags
.alignment
>= xt_block_2
->flags
.alignment
)
12301 if (xt_block_2
->flags
.is_align
)
12303 /* Push alignment to previous entry. */
12304 xt_block
->flags
.is_align
= xt_block_2
->flags
.is_align
;
12305 xt_block
->flags
.alignment
= xt_block_2
->flags
.alignment
;
12310 if (!xtensa_frag_flags_combinable (&xt_block
->flags
,
12311 &xt_block_2
->flags
))
12314 xt_block
->size
+= xt_block_2
->size
;
12316 if (xt_block_2
->flags
.is_align
)
12318 xt_block
->flags
.is_align
= TRUE
;
12319 xt_block
->flags
.alignment
= xt_block_2
->flags
.alignment
;
12327 add_xt_prop_frags (segT sec
,
12328 xtensa_block_info
**xt_block
,
12329 frag_flags_fn property_function
)
12333 /* Build it if needed. */
12334 while (*xt_block
!= NULL
)
12336 xt_block
= &(*xt_block
)->next
;
12338 /* We are either at NULL at the beginning or at the end. */
12340 /* Walk through the frags. */
12341 if (seg_info (sec
)->frchainP
)
12343 for (fragP
= seg_info (sec
)->frchainP
->frch_root
; fragP
;
12344 fragP
= fragP
->fr_next
)
12346 xtensa_block_info tmp_block
;
12347 tmp_block
.sec
= sec
;
12348 tmp_block
.offset
= fragP
->fr_address
;
12349 tmp_block
.size
= fragP
->fr_fix
;
12350 tmp_block
.next
= NULL
;
12351 property_function (fragP
, &tmp_block
.flags
);
12353 if (!xtensa_frag_flags_is_empty (&tmp_block
.flags
))
12354 /* && fragP->fr_fix != 0) */
12356 if ((*xt_block
) == NULL
12357 || !xtensa_xt_block_combine (*xt_block
, &tmp_block
))
12359 xtensa_block_info
*new_block
;
12360 if ((*xt_block
) != NULL
)
12361 xt_block
= &(*xt_block
)->next
;
12362 new_block
= XNEW (xtensa_block_info
);
12363 *new_block
= tmp_block
;
12364 *xt_block
= new_block
;
12372 /* op_placement_info_table */
12374 /* op_placement_info makes it easier to determine which
12375 ops can go in which slots. */
12378 init_op_placement_info_table (void)
12380 xtensa_isa isa
= xtensa_default_isa
;
12381 xtensa_insnbuf ibuf
= xtensa_insnbuf_alloc (isa
);
12382 xtensa_opcode opcode
;
12385 int num_opcodes
= xtensa_isa_num_opcodes (isa
);
12387 op_placement_table
= XNEWVEC (op_placement_info
, num_opcodes
);
12388 gas_assert (xtensa_isa_num_formats (isa
) < MAX_FORMATS
);
12390 for (opcode
= 0; opcode
< num_opcodes
; opcode
++)
12392 op_placement_info
*opi
= &op_placement_table
[opcode
];
12393 /* FIXME: Make tinsn allocation dynamic. */
12394 if (xtensa_opcode_num_operands (isa
, opcode
) > MAX_INSN_ARGS
)
12395 as_fatal (_("too many operands in instruction"));
12396 opi
->narrowest
= XTENSA_UNDEFINED
;
12397 opi
->narrowest_size
= 0x7F;
12398 opi
->narrowest_slot
= 0;
12400 opi
->num_formats
= 0;
12402 for (fmt
= 0; fmt
< xtensa_isa_num_formats (isa
); fmt
++)
12404 opi
->slots
[fmt
] = 0;
12405 for (slot
= 0; slot
< xtensa_format_num_slots (isa
, fmt
); slot
++)
12407 if (xtensa_opcode_encode (isa
, fmt
, slot
, ibuf
, opcode
) == 0)
12409 int fmt_length
= xtensa_format_length (isa
, fmt
);
12411 set_bit (fmt
, opi
->formats
);
12412 set_bit (slot
, opi
->slots
[fmt
]);
12413 if (fmt_length
< opi
->narrowest_size
12414 || (fmt_length
== opi
->narrowest_size
12415 && (xtensa_format_num_slots (isa
, fmt
)
12416 < xtensa_format_num_slots (isa
,
12419 opi
->narrowest
= fmt
;
12420 opi
->narrowest_size
= fmt_length
;
12421 opi
->narrowest_slot
= slot
;
12426 opi
->num_formats
++;
12429 xtensa_insnbuf_free (isa
, ibuf
);
12434 opcode_fits_format_slot (xtensa_opcode opcode
, xtensa_format fmt
, int slot
)
12436 return bit_is_set (slot
, op_placement_table
[opcode
].slots
[fmt
]);
12440 /* If the opcode is available in a single slot format, return its size. */
12443 xg_get_single_size (xtensa_opcode opcode
)
12445 return op_placement_table
[opcode
].narrowest_size
;
12449 static xtensa_format
12450 xg_get_single_format (xtensa_opcode opcode
)
12452 return op_placement_table
[opcode
].narrowest
;
12457 xg_get_single_slot (xtensa_opcode opcode
)
12459 return op_placement_table
[opcode
].narrowest_slot
;
12463 /* Instruction Stack Functions (from "xtensa-istack.h"). */
12466 istack_init (IStack
*stack
)
12473 istack_empty (IStack
*stack
)
12475 return (stack
->ninsn
== 0);
12480 istack_full (IStack
*stack
)
12482 return (stack
->ninsn
== MAX_ISTACK
);
12486 /* Return a pointer to the top IStack entry.
12487 It is an error to call this if istack_empty () is TRUE. */
12490 istack_top (IStack
*stack
)
12492 int rec
= stack
->ninsn
- 1;
12493 gas_assert (!istack_empty (stack
));
12494 return &stack
->insn
[rec
];
12498 /* Add a new TInsn to an IStack.
12499 It is an error to call this if istack_full () is TRUE. */
12502 istack_push (IStack
*stack
, TInsn
*insn
)
12504 int rec
= stack
->ninsn
;
12505 gas_assert (!istack_full (stack
));
12506 stack
->insn
[rec
] = *insn
;
12511 /* Clear space for the next TInsn on the IStack and return a pointer
12512 to it. It is an error to call this if istack_full () is TRUE. */
12515 istack_push_space (IStack
*stack
)
12517 int rec
= stack
->ninsn
;
12519 gas_assert (!istack_full (stack
));
12520 insn
= &stack
->insn
[rec
];
12527 /* Remove the last pushed instruction. It is an error to call this if
12528 istack_empty () returns TRUE. */
12531 istack_pop (IStack
*stack
)
12533 int rec
= stack
->ninsn
- 1;
12534 gas_assert (!istack_empty (stack
));
12536 tinsn_init (&stack
->insn
[rec
]);
12540 /* TInsn functions. */
12543 tinsn_init (TInsn
*dst
)
12545 memset (dst
, 0, sizeof (TInsn
));
12549 /* Return TRUE if ANY of the operands in the insn are symbolic. */
12552 tinsn_has_symbolic_operands (const TInsn
*insn
)
12555 int n
= insn
->ntok
;
12557 gas_assert (insn
->insn_type
== ITYPE_INSN
);
12559 for (i
= 0; i
< n
; ++i
)
12561 switch (insn
->tok
[i
].X_op
)
12575 tinsn_has_invalid_symbolic_operands (const TInsn
*insn
)
12577 xtensa_isa isa
= xtensa_default_isa
;
12579 int n
= insn
->ntok
;
12581 gas_assert (insn
->insn_type
== ITYPE_INSN
);
12583 for (i
= 0; i
< n
; ++i
)
12585 switch (insn
->tok
[i
].X_op
)
12593 /* Errors for these types are caught later. */
12598 /* Symbolic immediates are only allowed on the last immediate
12599 operand. At this time, CONST16 is the only opcode where we
12600 support non-PC-relative relocations. */
12601 if (i
!= get_relaxable_immed (insn
->opcode
)
12602 || (xtensa_operand_is_PCrelative (isa
, insn
->opcode
, i
) != 1
12603 && insn
->opcode
!= xtensa_const16_opcode
))
12605 as_bad (_("invalid symbolic operand"));
12614 /* For assembly code with complex expressions (e.g. subtraction),
12615 we have to build them in the literal pool so that
12616 their results are calculated correctly after relaxation.
12617 The relaxation only handles expressions that
12618 boil down to SYMBOL + OFFSET. */
12621 tinsn_has_complex_operands (const TInsn
*insn
)
12624 int n
= insn
->ntok
;
12625 gas_assert (insn
->insn_type
== ITYPE_INSN
);
12626 for (i
= 0; i
< n
; ++i
)
12628 switch (insn
->tok
[i
].X_op
)
12644 /* Encode a TInsn opcode and its constant operands into slotbuf.
12645 Return TRUE if there is a symbol in the immediate field. This
12646 function assumes that:
12647 1) The number of operands are correct.
12648 2) The insn_type is ITYPE_INSN.
12649 3) The opcode can be encoded in the specified format and slot.
12650 4) Operands are either O_constant or O_symbol, and all constants fit. */
12653 tinsn_to_slotbuf (xtensa_format fmt
,
12656 xtensa_insnbuf slotbuf
)
12658 xtensa_isa isa
= xtensa_default_isa
;
12659 xtensa_opcode opcode
= tinsn
->opcode
;
12660 bfd_boolean has_fixup
= FALSE
;
12661 int noperands
= xtensa_opcode_num_operands (isa
, opcode
);
12664 gas_assert (tinsn
->insn_type
== ITYPE_INSN
);
12665 if (noperands
!= tinsn
->ntok
)
12666 as_fatal (_("operand number mismatch"));
12668 if (xtensa_opcode_encode (isa
, fmt
, slot
, slotbuf
, opcode
))
12670 as_bad (_("cannot encode opcode \"%s\" in the given format \"%s\""),
12671 xtensa_opcode_name (isa
, opcode
), xtensa_format_name (isa
, fmt
));
12675 for (i
= 0; i
< noperands
; i
++)
12677 expressionS
*exp
= &tinsn
->tok
[i
];
12680 const char *file_name
;
12686 if (xtensa_operand_is_visible (isa
, opcode
, i
) == 0)
12688 /* The register number has already been checked in
12689 expression_maybe_register, so we don't need to check here. */
12690 opnd_value
= exp
->X_add_number
;
12691 (void) xtensa_operand_encode (isa
, opcode
, i
, &opnd_value
);
12692 rc
= xtensa_operand_set_field (isa
, opcode
, i
, fmt
, slot
, slotbuf
,
12695 as_warn (_("xtensa-isa failure: %s"), xtensa_isa_error_msg (isa
));
12699 if (xtensa_operand_is_visible (isa
, opcode
, i
) == 0)
12701 file_name
= as_where (&line
);
12702 /* It is a constant and we called this function
12703 then we have to try to fit it. */
12704 xtensa_insnbuf_set_operand (slotbuf
, fmt
, slot
, opcode
, i
,
12705 exp
->X_add_number
, file_name
, line
);
12718 /* Encode a single TInsn into an insnbuf. If the opcode can only be encoded
12719 into a multi-slot instruction, fill the other slots with NOPs.
12720 Return TRUE if there is a symbol in the immediate field. See also the
12721 assumptions listed for tinsn_to_slotbuf. */
12724 tinsn_to_insnbuf (TInsn
*tinsn
, xtensa_insnbuf insnbuf
)
12726 static xtensa_insnbuf slotbuf
= 0;
12727 static vliw_insn vinsn
;
12728 xtensa_isa isa
= xtensa_default_isa
;
12729 bfd_boolean has_fixup
= FALSE
;
12734 slotbuf
= xtensa_insnbuf_alloc (isa
);
12735 xg_init_vinsn (&vinsn
);
12738 xg_clear_vinsn (&vinsn
);
12740 bundle_tinsn (tinsn
, &vinsn
);
12742 xtensa_format_encode (isa
, vinsn
.format
, insnbuf
);
12744 for (i
= 0; i
< vinsn
.num_slots
; i
++)
12746 /* Only one slot may have a fix-up because the rest contains NOPs. */
12748 tinsn_to_slotbuf (vinsn
.format
, i
, &vinsn
.slots
[i
], vinsn
.slotbuf
[i
]);
12749 xtensa_format_set_slot (isa
, vinsn
.format
, i
, insnbuf
, vinsn
.slotbuf
[i
]);
12756 /* Check the instruction arguments. Return TRUE on failure. */
12759 tinsn_check_arguments (const TInsn
*insn
)
12761 xtensa_isa isa
= xtensa_default_isa
;
12762 xtensa_opcode opcode
= insn
->opcode
;
12763 xtensa_regfile t1_regfile
, t2_regfile
;
12764 int t1_reg
, t2_reg
;
12765 int t1_base_reg
, t1_last_reg
;
12766 int t2_base_reg
, t2_last_reg
;
12767 char t1_inout
, t2_inout
;
12770 if (opcode
== XTENSA_UNDEFINED
)
12772 as_bad (_("invalid opcode"));
12776 if (xtensa_opcode_num_operands (isa
, opcode
) > insn
->ntok
)
12778 as_bad (_("too few operands"));
12782 if (xtensa_opcode_num_operands (isa
, opcode
) < insn
->ntok
)
12784 as_bad (_("too many operands"));
12788 /* Check registers. */
12789 for (j
= 0; j
< insn
->ntok
; j
++)
12791 if (xtensa_operand_is_register (isa
, insn
->opcode
, j
) != 1)
12794 t2_regfile
= xtensa_operand_regfile (isa
, insn
->opcode
, j
);
12795 t2_base_reg
= insn
->tok
[j
].X_add_number
;
12797 = t2_base_reg
+ xtensa_operand_num_regs (isa
, insn
->opcode
, j
);
12799 for (i
= 0; i
< insn
->ntok
; i
++)
12804 if (xtensa_operand_is_register (isa
, insn
->opcode
, i
) != 1)
12807 t1_regfile
= xtensa_operand_regfile (isa
, insn
->opcode
, i
);
12809 if (t1_regfile
!= t2_regfile
)
12812 t1_inout
= xtensa_operand_inout (isa
, insn
->opcode
, i
);
12813 t2_inout
= xtensa_operand_inout (isa
, insn
->opcode
, j
);
12815 t1_base_reg
= insn
->tok
[i
].X_add_number
;
12816 t1_last_reg
= (t1_base_reg
12817 + xtensa_operand_num_regs (isa
, insn
->opcode
, i
));
12819 for (t1_reg
= t1_base_reg
; t1_reg
< t1_last_reg
; t1_reg
++)
12821 for (t2_reg
= t2_base_reg
; t2_reg
< t2_last_reg
; t2_reg
++)
12823 if (t1_reg
!= t2_reg
)
12826 if (t1_inout
!= 'i' && t2_inout
!= 'i')
12828 as_bad (_("multiple writes to the same register"));
12839 /* Load an instruction from its encoded form. */
12842 tinsn_from_chars (TInsn
*tinsn
, char *f
, int slot
)
12846 xg_init_vinsn (&vinsn
);
12847 vinsn_from_chars (&vinsn
, f
);
12849 *tinsn
= vinsn
.slots
[slot
];
12850 xg_free_vinsn (&vinsn
);
12855 tinsn_from_insnbuf (TInsn
*tinsn
,
12856 xtensa_insnbuf slotbuf
,
12861 xtensa_isa isa
= xtensa_default_isa
;
12863 /* Find the immed. */
12864 tinsn_init (tinsn
);
12865 tinsn
->insn_type
= ITYPE_INSN
;
12866 tinsn
->is_specific_opcode
= FALSE
; /* must not be specific */
12867 tinsn
->opcode
= xtensa_opcode_decode (isa
, fmt
, slot
, slotbuf
);
12868 tinsn
->ntok
= xtensa_opcode_num_operands (isa
, tinsn
->opcode
);
12869 for (i
= 0; i
< tinsn
->ntok
; i
++)
12871 set_expr_const (&tinsn
->tok
[i
],
12872 xtensa_insnbuf_get_operand (slotbuf
, fmt
, slot
,
12873 tinsn
->opcode
, i
));
12878 /* Read the value of the relaxable immed from the fr_symbol and fr_offset. */
12881 tinsn_immed_from_frag (TInsn
*tinsn
, fragS
*fragP
, int slot
)
12883 xtensa_opcode opcode
= tinsn
->opcode
;
12886 if (fragP
->tc_frag_data
.slot_symbols
[slot
])
12888 opnum
= get_relaxable_immed (opcode
);
12889 gas_assert (opnum
>= 0);
12890 set_expr_symbol_offset (&tinsn
->tok
[opnum
],
12891 fragP
->tc_frag_data
.slot_symbols
[slot
],
12892 fragP
->tc_frag_data
.slot_offsets
[slot
]);
12894 tinsn
->extra_arg
= fragP
->tc_frag_data
.free_reg
[slot
];
12899 get_num_stack_text_bytes (IStack
*istack
)
12902 int text_bytes
= 0;
12904 for (i
= 0; i
< istack
->ninsn
; i
++)
12906 TInsn
*tinsn
= &istack
->insn
[i
];
12907 if (tinsn
->insn_type
== ITYPE_INSN
)
12908 text_bytes
+= xg_get_single_size (tinsn
->opcode
);
12915 get_num_stack_literal_bytes (IStack
*istack
)
12920 for (i
= 0; i
< istack
->ninsn
; i
++)
12922 TInsn
*tinsn
= &istack
->insn
[i
];
12923 if (tinsn
->insn_type
== ITYPE_LITERAL
&& tinsn
->ntok
== 1)
12930 /* vliw_insn functions. */
12933 xg_init_vinsn (vliw_insn
*v
)
12936 xtensa_isa isa
= xtensa_default_isa
;
12938 xg_clear_vinsn (v
);
12940 v
->insnbuf
= xtensa_insnbuf_alloc (isa
);
12941 if (v
->insnbuf
== NULL
)
12942 as_fatal (_("out of memory"));
12944 for (i
= 0; i
< config_max_slots
; i
++)
12946 v
->slotbuf
[i
] = xtensa_insnbuf_alloc (isa
);
12947 if (v
->slotbuf
[i
] == NULL
)
12948 as_fatal (_("out of memory"));
12954 xg_clear_vinsn (vliw_insn
*v
)
12958 memset (v
, 0, offsetof (vliw_insn
, slots
)
12959 + sizeof(TInsn
) * config_max_slots
);
12961 v
->format
= XTENSA_UNDEFINED
;
12963 v
->inside_bundle
= FALSE
;
12965 if (xt_saved_debug_type
!= DEBUG_NONE
)
12966 debug_type
= xt_saved_debug_type
;
12968 for (i
= 0; i
< config_max_slots
; i
++)
12969 v
->slots
[i
].opcode
= XTENSA_UNDEFINED
;
12974 xg_copy_vinsn (vliw_insn
*dst
, vliw_insn
*src
)
12977 offsetof(vliw_insn
, slots
) + src
->num_slots
* sizeof(TInsn
));
12978 dst
->insnbuf
= src
->insnbuf
;
12979 memcpy (dst
->slotbuf
, src
->slotbuf
, src
->num_slots
* sizeof(xtensa_insnbuf
));
12984 vinsn_has_specific_opcodes (vliw_insn
*v
)
12988 for (i
= 0; i
< v
->num_slots
; i
++)
12990 if (v
->slots
[i
].is_specific_opcode
)
12998 xg_free_vinsn (vliw_insn
*v
)
13001 xtensa_insnbuf_free (xtensa_default_isa
, v
->insnbuf
);
13002 for (i
= 0; i
< config_max_slots
; i
++)
13003 xtensa_insnbuf_free (xtensa_default_isa
, v
->slotbuf
[i
]);
13007 /* Encode a vliw_insn into an insnbuf. Return TRUE if there are any symbolic
13008 operands. See also the assumptions listed for tinsn_to_slotbuf. */
13011 vinsn_to_insnbuf (vliw_insn
*vinsn
,
13014 bfd_boolean record_fixup
)
13016 xtensa_isa isa
= xtensa_default_isa
;
13017 xtensa_format fmt
= vinsn
->format
;
13018 xtensa_insnbuf insnbuf
= vinsn
->insnbuf
;
13020 bfd_boolean has_fixup
= FALSE
;
13022 xtensa_format_encode (isa
, fmt
, insnbuf
);
13024 for (slot
= 0; slot
< vinsn
->num_slots
; slot
++)
13026 TInsn
*tinsn
= &vinsn
->slots
[slot
];
13027 expressionS
*extra_arg
= &tinsn
->extra_arg
;
13028 bfd_boolean tinsn_has_fixup
=
13029 tinsn_to_slotbuf (vinsn
->format
, slot
, tinsn
,
13030 vinsn
->slotbuf
[slot
]);
13032 xtensa_format_set_slot (isa
, fmt
, slot
,
13033 insnbuf
, vinsn
->slotbuf
[slot
]);
13034 if (extra_arg
->X_op
!= O_illegal
&& extra_arg
->X_op
!= O_register
)
13036 if (vinsn
->num_slots
!= 1)
13037 as_bad (_("TLS relocation not allowed in FLIX bundle"));
13038 else if (record_fixup
)
13039 /* Instructions that generate TLS relocations should always be
13040 relaxed in the front-end. If "record_fixup" is set, then this
13041 function is being called during back-end relaxation, so flag
13042 the unexpected behavior as an error. */
13043 as_bad (_("unexpected TLS relocation"));
13045 fix_new (fragP
, frag_offset
- fragP
->fr_literal
,
13046 xtensa_format_length (isa
, fmt
),
13047 extra_arg
->X_add_symbol
, extra_arg
->X_add_number
,
13048 FALSE
, map_operator_to_reloc (extra_arg
->X_op
, FALSE
));
13050 if (tinsn_has_fixup
)
13053 xtensa_opcode opcode
= tinsn
->opcode
;
13054 int noperands
= xtensa_opcode_num_operands (isa
, opcode
);
13057 for (i
= 0; i
< noperands
; i
++)
13059 expressionS
* exp
= &tinsn
->tok
[i
];
13065 if (get_relaxable_immed (opcode
) == i
)
13067 /* Add a fix record for the instruction, except if this
13068 function is being called prior to relaxation, i.e.,
13069 if record_fixup is false, and the instruction might
13070 be relaxed later. */
13072 || tinsn
->is_specific_opcode
13073 || !xg_is_relaxable_insn (tinsn
, 0))
13075 xg_add_opcode_fix (tinsn
, i
, fmt
, slot
, exp
, fragP
,
13076 frag_offset
- fragP
->fr_literal
);
13080 if (exp
->X_op
!= O_symbol
)
13081 as_bad (_("invalid operand"));
13082 tinsn
->symbol
= exp
->X_add_symbol
;
13083 tinsn
->offset
= exp
->X_add_number
;
13087 as_bad (_("symbolic operand not allowed"));
13095 as_bad (_("expression too complex"));
13107 vinsn_from_chars (vliw_insn
*vinsn
, char *f
)
13109 static xtensa_insnbuf insnbuf
= NULL
;
13110 static xtensa_insnbuf slotbuf
= NULL
;
13113 xtensa_isa isa
= xtensa_default_isa
;
13117 insnbuf
= xtensa_insnbuf_alloc (isa
);
13118 slotbuf
= xtensa_insnbuf_alloc (isa
);
13121 xtensa_insnbuf_from_chars (isa
, insnbuf
, (unsigned char *) f
, 0);
13122 fmt
= xtensa_format_decode (isa
, insnbuf
);
13123 if (fmt
== XTENSA_UNDEFINED
)
13124 as_fatal (_("cannot decode instruction format"));
13125 vinsn
->format
= fmt
;
13126 vinsn
->num_slots
= xtensa_format_num_slots (isa
, fmt
);
13128 for (i
= 0; i
< vinsn
->num_slots
; i
++)
13130 TInsn
*tinsn
= &vinsn
->slots
[i
];
13131 xtensa_format_get_slot (isa
, fmt
, i
, insnbuf
, slotbuf
);
13132 tinsn_from_insnbuf (tinsn
, slotbuf
, fmt
, i
);
13137 /* Expression utilities. */
13139 /* Return TRUE if the expression is an integer constant. */
13142 expr_is_const (const expressionS
*s
)
13144 return (s
->X_op
== O_constant
);
13148 /* Get the expression constant.
13149 Calling this is illegal if expr_is_const () returns TRUE. */
13152 get_expr_const (const expressionS
*s
)
13154 gas_assert (expr_is_const (s
));
13155 return s
->X_add_number
;
13159 /* Set the expression to a constant value. */
13162 set_expr_const (expressionS
*s
, offsetT val
)
13164 s
->X_op
= O_constant
;
13165 s
->X_add_number
= val
;
13166 s
->X_add_symbol
= NULL
;
13167 s
->X_op_symbol
= NULL
;
13172 expr_is_register (const expressionS
*s
)
13174 return (s
->X_op
== O_register
);
13178 /* Get the expression constant.
13179 Calling this is illegal if expr_is_const () returns TRUE. */
13182 get_expr_register (const expressionS
*s
)
13184 gas_assert (expr_is_register (s
));
13185 return s
->X_add_number
;
13189 /* Set the expression to a symbol + constant offset. */
13192 set_expr_symbol_offset (expressionS
*s
, symbolS
*sym
, offsetT offset
)
13194 s
->X_op
= O_symbol
;
13195 s
->X_add_symbol
= sym
;
13196 s
->X_op_symbol
= NULL
; /* unused */
13197 s
->X_add_number
= offset
;
13201 /* Return TRUE if the two expressions are equal. */
13204 expr_is_equal (expressionS
*s1
, expressionS
*s2
)
13206 if (s1
->X_op
!= s2
->X_op
)
13208 if (s1
->X_add_symbol
!= s2
->X_add_symbol
)
13210 if (s1
->X_op_symbol
!= s2
->X_op_symbol
)
13212 if (s1
->X_add_number
!= s2
->X_add_number
)
13219 copy_expr (expressionS
*dst
, const expressionS
*src
)
13221 memcpy (dst
, src
, sizeof (expressionS
));
13225 /* Support for the "--rename-section" option. */
13227 struct rename_section_struct
13229 const char *old_name
;
13231 struct rename_section_struct
*next
;
13234 static struct rename_section_struct
*section_rename
;
13237 /* Parse the string "oldname=new_name(:oldname2=new_name2)*" and add
13238 entries to the section_rename list. Note: Specifying multiple
13239 renamings separated by colons is not documented and is retained only
13240 for backward compatibility. */
13243 build_section_rename (const char *arg
)
13245 struct rename_section_struct
*r
;
13246 char *this_arg
= NULL
;
13247 char *next_arg
= NULL
;
13249 for (this_arg
= xstrdup (arg
); this_arg
!= NULL
; this_arg
= next_arg
)
13251 char *old_name
, *new_name
;
13255 next_arg
= strchr (this_arg
, ':');
13263 old_name
= this_arg
;
13264 new_name
= strchr (this_arg
, '=');
13266 if (*old_name
== '\0')
13268 as_warn (_("ignoring extra '-rename-section' delimiter ':'"));
13271 if (!new_name
|| new_name
[1] == '\0')
13273 as_warn (_("ignoring invalid '-rename-section' specification: '%s'"),
13280 /* Check for invalid section renaming. */
13281 for (r
= section_rename
; r
!= NULL
; r
= r
->next
)
13283 if (strcmp (r
->old_name
, old_name
) == 0)
13284 as_bad (_("section %s renamed multiple times"), old_name
);
13285 if (strcmp (r
->new_name
, new_name
) == 0)
13286 as_bad (_("multiple sections remapped to output section %s"),
13291 r
= XNEW (struct rename_section_struct
);
13292 r
->old_name
= xstrdup (old_name
);
13293 r
->new_name
= xstrdup (new_name
);
13294 r
->next
= section_rename
;
13295 section_rename
= r
;
13301 xtensa_section_rename (const char *name
)
13303 struct rename_section_struct
*r
= section_rename
;
13305 for (r
= section_rename
; r
!= NULL
; r
= r
->next
)
13307 if (strcmp (r
->old_name
, name
) == 0)
13308 return r
->new_name
;
13311 return (char *) name
;