1 # Makefile for GNU C compiler.
2 # Copyright (C) 1987, 88, 90-98, 1999 Free Software Foundation, Inc.
4 #This file is part of GNU CC.
6 #GNU CC is free software; you can redistribute it and/or modify
7 #it under the terms of the GNU General Public License as published by
8 #the Free Software Foundation; either version 2, or (at your option)
11 #GNU CC is distributed in the hope that it will be useful,
12 #but WITHOUT ANY WARRANTY; without even the implied warranty of
13 #MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 #GNU General Public License for more details.
16 #You should have received a copy of the GNU General Public License
17 #along with GNU CC; see the file COPYING. If not, write to
18 #the Free Software Foundation, 59 Temple Place - Suite 330,
19 #Boston MA 02111-1307, USA.
21 # The targets for external use include:
22 # all, doc, proto, install, install-cross, install-cross-rest,
23 # uninstall, TAGS, mostlyclean, clean, distclean, maintainer-clean,
24 # stage1, stage2, stage3, stage4.
26 # Suppress smart makes who think they know how to automake Yacc files
29 # Directory where sources are, from where we are.
33 # Variables that exist for you to override.
34 # See below for how to change them for certain systems.
36 # List of language subdirectories.
37 # This is overridden by configure.
40 # Selection of languages to be made.
41 # This is overridden by configure.
42 CONFIG_LANGUAGES
= @all_languages@
43 LANGUAGES
= c proto gcov
$(exeext
) $(CONFIG_LANGUAGES
)
45 # Languages should create dependencies of $(INTL_TARGETS) on generated
46 # sources in Make-lang.in. Example:
47 # $(INTL_TARGETS): $(srcdir)/cp/parse.c
48 INTL_TARGETS
= intl.
all intl.
install intl.distdir
50 # Selection of languages to be made during stage1 build.
51 # This is overridden by configure.
52 BOOT_LANGUAGES
= c @all_boot_languages@
58 # Various ways of specifying flags for compilations:
59 # CFLAGS is for the user to override to, e.g., do a bootstrap with -O2.
60 # BOOT_CFLAGS is the value of CFLAGS to pass
61 # to the stage2 and stage3 compilations
62 # WARN_CFLAGS are the warning flags to pass to stage2 and stage3.
63 # (And for stage 1 if the native compiler is GCC.) It is
64 # separate from BOOT_CFLAGS because people tend to override optimization
65 # flags and we'd like them to still have warnings turned on. They are free
66 # to explicitly turn warnings off if they wish.
67 # XCFLAGS is used for most compilations but not when using the GCC just built.
68 # TCFLAGS is used for compilations with the GCC just built.
71 CFLAGS
= -g @stage1_warn_cflags@
72 BOOT_CFLAGS
= -O2
$(CFLAGS
)
73 WARN_CFLAGS
= -W
-Wall
74 # These exists to be overridden by the x-* and t-* files, respectively.
83 # srcdir might be a relative pathname which won't be valid in a subdirectory,
84 # so we must use objdir/srcdir instead to make it safe. objdir is always
86 BISON
= `if [ -f $(objdir)/../bison/bison ] ; then case $(srcdir) in \
87 /*) echo $(objdir)/../bison/bison -L $(srcdir)/../bison/ ;; \
88 *) echo $(objdir)/../bison/bison -L $(objdir)/$(srcdir)/../bison/ ;; \
89 esac; else echo bison ; fi`
91 LEX
= `if [ -f $(objdir)/../flex/flex ] ; then echo $(objdir)/../flex/flex ; else echo flex ; fi`
98 # on sysV, define this as cp.
100 # Some systems may be missing symbolic links, regular links, or both.
101 # Allow configure to check this and use "ln -s", "ln", or "cp" as appropriate.
104 # These permit overriding just for certain files.
105 INSTALL_PROGRAM
= @INSTALL_PROGRAM@
106 INSTALL_DATA
= @INSTALL_DATA@
107 MAKEINFO
= `if [ -f $(objdir)/../texinfo/makeinfo/Makefile ] ; \
108 then echo $(objdir)/../texinfo/makeinfo/makeinfo ; \
109 else echo makeinfo ; fi`
112 # For GNUmake: let us decide what gets passed to recursive makes.
116 # Define this as & to perform parallel make on a Sequent.
117 # Note that this has some bugs, and it seems currently necessary
118 # to compile all the gen* files first by hand to avoid erroneous results.
121 # How to invoke ranlib.
123 # Test to use to see whether ranlib exists on the system.
126 ||
[ -f
/usr
/bin
/ranlib
-o
-f
/bin
/ranlib
]
128 # Compiler to use for compiling libgcc1.a.
129 # OLDCC should not be the GNU C compiler,
130 # since that would compile typical libgcc1.a functions such as mulsi3
131 # into infinite recursions.
134 # CFLAGS for use with OLDCC, for compiling libgcc1.a.
135 # NOTE: -O does not work on some Unix systems!
138 # Version of ar to use when compiling libgcc1.a.
142 # Target to use when installing include directory. Either
143 # install-headers-tar or install-headers-cpio.
144 INSTALL_HEADERS_DIR
= @build_install_headers_dir@
146 # Header files that are made available under the same name
147 # to programs compiled with GCC.
148 USER_H
= $(srcdir)/ginclude
/stdarg.h
$(srcdir)/ginclude
/stddef.h \
149 $(srcdir)/ginclude
/varargs.h
$(srcdir)/ginclude
/va-alpha.h \
150 $(srcdir)/ginclude
/va-h8300.h
$(srcdir)/ginclude
/va-i860.h \
151 $(srcdir)/ginclude
/va-i960.h
$(srcdir)/ginclude
/va-mips.h \
152 $(srcdir)/ginclude
/va-m88k.h
$(srcdir)/ginclude
/va-mn10200.h \
153 $(srcdir)/ginclude
/va-mn10300.h
$(srcdir)/ginclude
/va-pa.h \
154 $(srcdir)/ginclude
/va-pyr.h
$(srcdir)/ginclude
/va-sparc.h \
155 $(srcdir)/ginclude
/va-clipper.h
$(srcdir)/ginclude
/va-spur.h \
156 $(srcdir)/ginclude
/va-m32r.h
$(srcdir)/ginclude
/va-sh.h \
157 $(srcdir)/ginclude
/va-v850.h
$(srcdir)/ginclude
/va-arc.h \
158 $(srcdir)/ginclude
/iso646.h
$(srcdir)/ginclude
/va-ppc.h \
159 $(srcdir)/ginclude
/va-c4x.h
$(EXTRA_HEADERS
) $(LANG_EXTRA_HEADERS
) \
160 $(srcdir)/ginclude
/proto.h
$(srcdir)/ginclude
/stdbool.h
162 # Target to use whe installing assert.h. Some systems may
163 # want to set this empty.
164 INSTALL_ASSERT_H
= install-assert-h
166 # The GCC to use for compiling libgcc2.a, enquire, and libgcc1-test.
167 # Usually the one we just built.
168 # Don't use this as a dependency--use $(GCC_PASSES) or $(GCC_PARTS).
169 GCC_FOR_TARGET
= .
/xgcc
-B.
/ -B
$(build_tooldir
)/bin
/
171 # This is used instead of ALL_CFLAGS when compiling with GCC_FOR_TARGET.
172 # It omits XCFLAGS, and specifies -B./.
173 # It also specifies -I./include to find, e.g., stddef.h.
174 GCC_CFLAGS
=$(INTERNAL_CFLAGS
) $(X_CFLAGS
) $(T_CFLAGS
) $(CFLAGS
) -I.
/include $(TCFLAGS
)
176 # Sed command to transform gcc to installed name. Overwritten by configure.
177 program_transform_name
= @program_transform_name@
178 program_transform_cross_name
= s
,^
,$(target_alias
)-,
180 build_canonical
= @build_canonical@
181 host_canonical
= @host_canonical@
183 # Tools to use when building a cross-compiler.
184 # These are used because `configure' appends `cross-make'
185 # to the makefile when making a cross-compiler.
187 # Use the tools from the build tree, if they are available.
189 # objdir is set by configure.
193 if [ -f $(objdir)/../binutils/ar ] ; then \
194 echo $(objdir)/../binutils/ar ; \
196 if [ "$(host_canonical)" = "$(target)" ] ; then \
199 t='$(program_transform_name)'; echo ar | sed -e $$t ; \
202 AR_FLAGS_FOR_TARGET
= rc
203 RANLIB_FOR_TARGET
= ` \
204 if [ -f $(objdir)/../binutils/ranlib ] ; then \
205 echo $(objdir)/../binutils/ranlib ; \
207 if [ "$(host_canonical)" = "$(target)" ] ; then \
210 t='$(program_transform_name)'; echo ranlib | sed -e $$t ; \
213 RANLIB_TEST_FOR_TARGET
= \
214 [ -f
$(RANLIB_FOR_TARGET
) ] \
215 ||
( [ "$(host_canonical)" = "$(target)" ] \
216 && [ -f
/usr
/bin
/ranlib
-o
-f
/bin
/ranlib
] )
218 # Dir to search for system headers. Overridden by cross-make.
219 SYSTEM_HEADER_DIR
= /usr
/include
221 # Control whether to run fixproto.
222 STMP_FIXPROTO
= stmp-fixproto
224 # Test to see whether <limits.h> exists in the system header files.
225 LIMITS_H_TEST
= [ -f
$(SYSTEM_HEADER_DIR
)/limits.h
]
227 # There may be a premade insn-attrtab.c for this machine.
228 # (You could rebuild it with genattrtab as usual, but it takes a long time.)
229 # PREMADE_ATTRTAB is the file name of the file to use.
230 # PREMADE_ATTRTAB_MD is the md file it corresponds to.
231 PREMADE_ATTRTAB_MD
= Makefile
# Guaranteed not to cmp equal to md.
235 target_alias
=@target_alias@
236 xmake_file
=@dep_host_xmake_file@
237 tmake_file
=@dep_tmake_file@
238 out_file
=$(srcdir)/config
/@out_file@
239 out_object_file
=@out_object_file@
240 md_file
=$(srcdir)/config
/@md_file@
241 tm_file
=@tm_file_list@
242 build_xm_file
=@build_xm_file_list@
243 host_xm_file
=@host_xm_file_list@
244 lang_specs_files
=@lang_specs_files@
245 lang_options_files
=@lang_options_files@
246 lang_tree_files
=@lang_tree_files@
247 GCC_THREAD_FILE
=@thread_file@
248 OBJC_BOEHM_GC
=@objc_boehm_gc@
250 GTHREAD_FLAGS
=@gthread_flags@
251 # Be prepared for gcc2 merges.
252 gcc_version
=@gcc_version@
253 gcc_version_trigger
=@gcc_version_trigger@
254 version
=$(gcc_version
)
255 mainversion
=`sed -e 's/.*\"\([0-9]*\.[0-9]*\).*/\1/' < $(srcdir)/version.c`
257 # Common prefix for installation directories.
258 # NOTE: This directory must exist when you start installation.
260 # Directory in which to put localized header files. On the systems with
261 # gcc as the native cc, `local_prefix' may not be `prefix' which is
263 # NOTE: local_prefix *should not* default from prefix.
264 local_prefix
= @local_prefix@
265 # Directory in which to put host dependent programs and libraries
266 exec_prefix = @
exec_prefix@
267 # Directory in which to put the executable for the command `gcc'
269 # Directory in which to put the directories used by the compiler.
271 # Directory in which the compiler finds executables, libraries, etc.
272 libsubdir
= $(libdir)/gcc-lib
/$(target_alias
)/$(version
)
273 # Used to produce a relative $(gcc_tooldir) in gcc.o
274 unlibsubdir
= ..
/..
/..
275 # Directory in which to find other cross-compilation tools and headers.
277 # Used in install-cross.
278 gcc_tooldir
= @gcc_tooldir@
279 # Since tooldir does not exist at build-time, use -B$(build_tooldir)/bin/
280 build_tooldir
= $(exec_prefix)/$(target_alias
)
281 # Directory in which the compiler finds g++ includes.
282 gcc_gxx_include_dir
= @gcc_gxx_include_dir@
283 # Directory to search for site-specific includes.
284 includedir = $(local_prefix
)/include
285 # assertdir is overridden in cross-make.
286 # (But this currently agrees with what is in cross-make.)
287 assertdir
= $(gcc_tooldir
)/include
288 # where the info files go
290 # Where cpp should go besides $prefix/bin if necessary
291 cpp_install_dir
= @cpp_install_dir@
292 # where the locale files go
293 datadir = $(prefix)/@DATADIRNAME@
294 localedir
= $(datadir)/locale
295 # Extension (if any) to put in installed man-page filename.
298 exeext
= @host_exeext@
299 build_exeext
= @build_exeext@
301 # Directory in which to put man pages.
303 man1dir = $(mandir)/man1
304 # Dir for temp files.
307 # Top build directory, relative to here.
310 # Whether we were configured with NLS.
313 # Internationalization library.
314 INTLLIBS
= @INTLLIBS@
316 # List of internationalization subdirectories.
318 INTL_SUBDIRS
= intl
$(POSUB
)
320 # Additional system libraries to link with.
323 # Change this to a null string if obstacks are installed in the
327 # Configure will set these if you need vfprintf and possibly _doprnt support.
331 # Specify the rule for actually making libgcc.a,
333 # and the rule for installing it.
334 INSTALL_LIBGCC
= install-libgcc
336 # Specify the rule for actually making libgcc1.a.
337 # The value may be empty; that means to do absolutely nothing
338 # with or for libgcc1.a.
341 # Specify the rule for making libgcc1.a for a cross-compiler.
342 # The default rule assumes that libgcc1.a is supplied by the user.
343 CROSS_LIBGCC1
= libgcc1.cross
345 # Specify the rule for actually making libgcc2.a.
348 # Options to use when compiling libgcc2.a.
349 # -g1 causes output of debug info only for file-scope entities.
350 # we use this here because that should be enough, and also
351 # so that -g1 will be tested.
353 LIBGCC2_DEBUG_CFLAGS
= -g1
354 LIBGCC2_CFLAGS
= -O2
$(LIBGCC2_INCLUDES
) $(GCC_CFLAGS
) $(TARGET_LIBGCC2_CFLAGS
) $(LIBGCC2_DEBUG_CFLAGS
) $(GTHREAD_FLAGS
) -DIN_LIBGCC2
-D__GCC_FLOAT_NOT_NEEDED @inhibit_libc@
356 # Additional options to use when compiling libgcc2.a.
357 # Some targets override this to -Iinclude
360 # Additional target-dependent options for compiling libgcc2.a.
361 TARGET_LIBGCC2_CFLAGS
=
363 # Things which must be built before building libgcc2.a.
364 # Some targets override this to stmp-int-hdrs
367 # libgcc1-test target (must also be overridable for a target)
368 LIBGCC1_TEST
= libgcc1-test
370 # List of extra executables that should be compiled for this target machine
371 # that are used for compiling from source code to object code.
372 # The rules for compiling them should be in the t-* file for the machine.
373 EXTRA_PASSES
=@extra_passes@
375 # Like EXTRA_PASSES, but these are used when linking.
376 EXTRA_PROGRAMS
= @extra_programs@
378 # List of extra object files that should be compiled for this target machine.
379 # The rules for compiling them should be in the t-* file for the machine.
380 EXTRA_PARTS
= @extra_parts@
382 # List of extra object files that should be compiled and linked with
383 # compiler proper (cc1, cc1obj, cc1plus).
384 EXTRA_OBJS
= @extra_objs@
386 # List of extra object files that should be compiled and linked with
388 EXTRA_GCC_OBJS
=@host_extra_gcc_objs@
390 # List of additional header files to install.
391 # Often this is edited directly by `configure'.
392 EXTRA_HEADERS
=@extra_headers_list@
394 # Set this to `collect2' to enable use of collect2.
395 USE_COLLECT2
= @will_use_collect2@
396 MAYBE_USE_COLLECT2
= @maybe_use_collect2@
397 # It is convenient for configure to add the assignment at the beginning,
398 # so don't override it here.
399 USE_COLLECT2
= collect2
$(exeext
)
401 # List of extra C and assembler files to add to libgcc1.a.
402 # Assembler files should have names ending in `.asm'.
405 # List of extra C and assembler files to add to libgcc2.a.
406 # Assembler files should have names ending in `.asm'.
409 # Handle cpp installation.
413 # We do not try to build float.h anymore. Let configure select the
414 # appropriate pre-built float.h file for the target.
415 FLOAT_H
=@float_h_file@
417 # Program to convert libraries.
420 # Control whether header files are installed.
421 INSTALL_HEADERS
=install-headers
423 # Options for tar when copying trees. So HPUX can override it.
426 # Additional directories of header files to run fixincludes on.
427 # These should be directories searched automatically by default
428 # just as /usr/include is.
429 # *Do not* use this for directories that happen to contain
430 # header files, but are not searched automatically by default.
431 # On most systems, this is empty.
432 OTHER_FIXINCLUDES_DIRS
=
434 # A list of all the language-specific executables.
435 # This is overridden by configure.
436 COMPILERS
= cc1
$(exeext
) @all_compilers@
438 # List of things which should already be built whenever we try to use xgcc
439 # to compile anything (without linking).
440 GCC_PASSES
=xgcc
$(exeext
) cc1
$(exeext
) cpp$(exeext
) $(EXTRA_PASSES
)
442 # List of things which should already be built whenever we try to use xgcc
444 GCC_PARTS
=$(GCC_PASSES
) $(LIBGCC
) $(EXTRA_PROGRAMS
) $(USE_COLLECT2
) $(EXTRA_PARTS
)
446 # Directory to link to, when using the target `maketest'.
449 # Guaranteed to not exist when not passing md through cpp.
450 # This value is overridden directly by configure.
451 MD_FILE
= md-cpp-not-used
453 # Flags to use when cross-building GCC.
454 # Prefix to apply to names of object files when using them
455 # to run on the machine we are compiling on.
457 # Prefix to apply to names of object files when compiling them
458 # to run on the machine we are compiling on.
459 # The default for this variable is chosen to keep these rules
460 # out of the way of the other rules for compiling the same source files.
463 HOST_CFLAGS
=$(ALL_CFLAGS
)
465 HOST_INTLLIBS
=$(INTLLIBS
)
466 HOST_LDFLAGS
=$(LDFLAGS
)
467 HOST_CPPFLAGS
=$(ALL_CPPFLAGS
)
468 HOST_ALLOCA
=$(ALLOCA
)
469 HOST_MALLOC
=$(MALLOC
)
470 HOST_OBSTACK
=$(OBSTACK
)
471 HOST_VFPRINTF
=$(VFPRINTF
)
472 HOST_DOPRINT
=$(DOPRINT
)
474 # Actual name to use when installing a native compiler.
475 GCC_INSTALL_NAME
= `t='$(program_transform_name)'; echo gcc | sed -e $$t`
476 CPP_INSTALL_NAME
= `t='$(program_transform_name)'; echo cpp | sed -e $$t`
477 PROTOIZE_INSTALL_NAME
= `t='$(program_transform_name)'; echo protoize | sed -e $$t`
478 UNPROTOIZE_INSTALL_NAME
= `t='$(program_transform_name)'; echo unprotoize | sed -e $$t`
479 GCOV_INSTALL_NAME
= `t='$(program_transform_name)'; echo gcov | sed -e $$t`
481 # Actual name to use when installing a cross-compiler.
482 GCC_CROSS_NAME
= `t='$(program_transform_cross_name)'; echo gcc | sed -e $$t`
483 PROTOIZE_CROSS_NAME
= `t='$(program_transform_cross_name)'; echo protoize | sed -e $$t`
484 UNPROTOIZE_CROSS_NAME
= `t='$(program_transform_cross_name)'; echo unprotoize | sed -e $$t`
486 # Choose the real default target.
489 # Choose the real install target.
490 INSTALL_TARGET
=install-normal
492 # Setup the testing framework, if you have one
493 EXPECT
= `if [ -f $${rootme}/../expect/expect ] ; then \
494 echo $${rootme}/../expect/expect ; \
495 else echo expect ; fi`
497 RUNTEST
= `if [ -f $${srcdir}/../dejagnu/runtest ] ; then \
498 echo $${srcdir}/../dejagnu/runtest ; \
499 else echo runtest; fi`
502 # Extra symbols for fixproto to define when parsing headers.
505 # Extra flags to use when compiling crt{begin,end}.o.
508 # Extra flags to use when compiling [m]crt0.o.
511 # "t" or nothing, for building multilibbed versions of, say, crtbegin.o.
514 # End of variables for you to override.
516 # Definition of `all' is here so that new rules inserted by sed
517 # do not specify the default target.
518 # The real definition is under `all.internal' (for native compilers)
519 # or `all.cross' (for cross compilers).
522 # This tells GNU Make version 3 not to put all variables in the environment.
525 # sed inserts variable overrides after the following line.
539 # Now figure out from those variables how to compile and link.
543 # IN_GCC tells various files that system.h, toplev.c, etc are available.
544 INTERNAL_CFLAGS
= $(CROSS
) -DIN_GCC
$(SCHED_CFLAGS
) @extra_c_flags@
546 # This is the variable actually used when we compile.
547 # If you change this line, you probably also need to change the definition
548 # of HOST_CFLAGS in build-make to match.
549 ALL_CFLAGS
= $(INTERNAL_CFLAGS
) $(X_CFLAGS
) $(T_CFLAGS
) $(CFLAGS
) $(XCFLAGS
) \
553 ALL_CPPFLAGS
= $(CPPFLAGS
) $(X_CPPFLAGS
) $(T_CPPFLAGS
)
555 # Even if ALLOCA is set, don't use it if compiling with GCC.
556 USE_ALLOCA
= ${ALLOCA}
557 USE_HOST_ALLOCA
= ` case "${HOST_ALLOCA}" in ?*) echo ${HOST_PREFIX}${HOST_ALLOCA} ;; esac `
558 USE_HOST_MALLOC
= ` case "${HOST_MALLOC}" in ?*) echo ${HOST_PREFIX}${HOST_MALLOC} ;; esac `
559 USE_HOST_OBSTACK
= ` case "${HOST_OBSTACK}" in ?*) echo ${HOST_PREFIX}${HOST_OBSTACK} ;; esac `
560 USE_HOST_VFPRINTF
= ` case "${HOST_VFPRINTF}" in ?*) echo ${HOST_PREFIX}${HOST_VFPRINTF} ;; esac `
561 USE_HOST_DOPRINT
= ` case "${HOST_DOPRINT}" in ?*) echo ${HOST_PREFIX}${HOST_DOPRINT} ;; esac `
563 # Dependency on obstack, alloca, malloc or whatever library facilities
564 # are not installed in the system libraries.
565 # We don't use USE_ALLOCA because backquote expansion doesn't work in deps.
566 LIBDEPS
= $(INTLLIBS
) $(OBSTACK
) $(ALLOCA
) $(MALLOC
) $(VFPRINTF
) $(DOPRINT
)
568 # Likewise, for use in the tools that must run on this machine
569 # even if we are cross-building GCC.
570 # We don't use USE_ALLOCA because backquote expansion doesn't work in deps.
571 HOST_LIBDEPS
= $(HOST_PREFIX
)$(HOST_INTLLIBS
) $(HOST_PREFIX
)$(HOST_OBSTACK
) $(HOST_PREFIX
)$(HOST_ALLOCA
) $(HOST_PREFIX
)$(HOST_MALLOC
) $(HOST_PREFIX
)$(HOST_VFPRINTF
) $(HOST_PREFIX
)$(HOST_DOPRINT
)
573 # How to link with both our special library facilities
574 # and the system's installed libraries.
575 LIBS
= $(OBSTACK
) $(USE_ALLOCA
) $(MALLOC
) $(INTLLIBS
) @LIBS@
$(VFPRINTF
) $(DOPRINT
) $(CLIB
) ..
/libiberty
/libiberty.a
577 # Likewise, for use in the tools that must run on this machine
578 # even if we are cross-building GCC.
579 HOST_LIBS
= $(USE_HOST_OBSTACK
) $(USE_HOST_ALLOCA
) $(USE_HOST_MALLOC
) \
580 $(HOST_INTLLIBS
) $(USE_HOST_VFPRINTF
) $(USE_HOST_DOPRINT
) \
583 HOST_RTL
= $(HOST_PREFIX
)rtl.o
$(HOST_PREFIX
)bitmap.o
584 HOST_RTLANAL
= $(HOST_PREFIX
)rtlanal.o
585 HOST_PRINT
= $(HOST_PREFIX
)print-rtl.o
587 # Specify the directories to be searched for header files.
588 # Both . and srcdir are used, in that order,
589 # so that tm.h and config.h will be found in the compilation
590 # subdirectory rather than in the source directory.
591 INCLUDES
= -I.
-I
$(srcdir) -I
$(srcdir)/config
-I
$(srcdir)/..
/include
593 # Always use -I$(srcdir)/config when compiling.
595 $(CC
) -c
$(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) $<
597 # This tells GNU make version 3 not to export all the variables
598 # defined in this file into the environment.
601 # Support for additional languages (other than c and objc).
602 # ??? objc can be supported this way too (leave for later).
604 # These next lines are overridden by configure.
605 LANG_MAKEFILES
= @all_lang_makefiles@
606 LANG_STAGESTUFF
= @all_stagestuff@
607 LANG_DIFF_EXCLUDES
= @all_diff_excludes@
608 LANG_LIB2FUNCS
= @all_lib2funcs@
609 LANG_EXTRA_HEADERS
= @all_headers@
611 # Flags to pass to recursive makes.
612 # CC is set by configure. Hosts without symlinks need special handling
613 # because we need CC="stage1/xgcc -Bstage1/" to work in the language
615 # ??? The choices here will need some experimenting with.
617 "AR_FLAGS_FOR_TARGET=$(AR_FLAGS_FOR_TARGET)" \
618 "AR_FOR_TARGET=$(AR_FOR_TARGET)" \
620 "BISONFLAGS=$(BISONFLAGS)" \
621 "CC=@cc_set_by_configure@" \
624 "GCC_FOR_TARGET=$(GCC_FOR_TARGET)" \
625 "LDFLAGS=$(LDFLAGS)" \
627 "LEXFLAGS=$(LEXFLAGS)" \
630 "MAKEINFO=$(MAKEINFO)" \
631 "MAKEINFOFLAGS=$(MAKEINFOFLAGS)" \
632 "RANLIB_FOR_TARGET=$(RANLIB_FOR_TARGET)" \
633 "RANLIB_TEST_FOR_TARGET=$(RANLIB_TEST_FOR_TARGET)" \
635 "STAGE_PREFIX=@stage_prefix_set_by_configure@" \
637 "build_exeext=$(build_exeext)" \
639 "exec_prefix=$(exec_prefix)" \
641 "local_prefix=$(local_prefix)" \
642 "gxx_include_dir=$(gcc_gxx_include_dir)" \
643 "tooldir=$(tooldir)" \
644 "gcc_tooldir=$(gcc_tooldir)" \
646 "libsubdir=$(libsubdir)" \
647 "datadir=$(datadir)" \
648 "distdir=../tmp/\$$(subdir)" \
649 "localedir=$(localedir)"
651 PREPEND_DOTDOT_TO_RELATIVE_PATHS
= sed \
652 -e
's|^ *[^ /][^ /]*/|%&|' \
654 -e
's|% *[^- /]|%&|g' \
657 SUBDIR_FLAGS_TO_PASS
= $(ORDINARY_FLAGS_TO_PASS
) \
658 "CC=`echo @cc_set_by_configure@ | $(PREPEND_DOTDOT_TO_RELATIVE_PATHS)`"
659 "CC=`echo @quoted_cc_set_by_configure@ | $(PREPEND_DOTDOT_TO_RELATIVE_PATHS)`"
661 # Lists of files for various purposes.
663 # Language-specific object files for C and Objective C.
664 C_AND_OBJC_OBJS
= c-lex.o c-pragma.o c-decl.o c-typeck.o c-convert.o \
665 c-aux-info.o c-common.o c-iterate.o @extra_c_objs@
667 # Language-specific object files for C.
668 C_OBJS
= c-parse.o c-lang.o
$(C_AND_OBJC_OBJS
)
670 SCHED_PREFIX
= @sched_prefix@
671 SCHED_CFLAGS
= @sched_cflags@
673 # Language-independent object files.
674 OBJS
= toplev.o version.o tree.o print-tree.o stor-layout.o fold-const.o \
675 function.o stmt.o except.o expr.o calls.o expmed.o explow.o optabs.o \
676 intl.o varasm.o rtl.o print-rtl.o rtlanal.o emit-rtl.o genrtl.o real.o \
677 dbxout.o sdbout.o dwarfout.o dwarf2out.o xcoffout.o bitmap.o alias.o gcse.o \
678 integrate.o jump.o cse.o loop.o unroll.o flow.o stupid.o combine.o varray.o \
679 regclass.o regmove.o local-alloc.o global.o reload.o reload1.o caller-save.o \
680 insn-peep.o reorg.o
$(SCHED_PREFIX
)sched.o final.o recog.o reg-stack.o \
681 insn-opinit.o insn-recog.o insn-extract.o insn-output.o insn-emit.o lcm.o \
682 profile.o insn-attrtab.o
$(out_object_file
) getpwd.o
$(EXTRA_OBJS
) convert.o \
683 mbchar.o dyn-string.o splay-tree.o graph.o sbitmap.o resource.o hash.o
685 # GEN files are listed separately, so they can be built before doing parallel
686 # makes for cc1 or cc1plus. Otherwise sequent parallel make attempts to load
687 # them before rtl.o is compiled.
688 GEN
= genemit genoutput genrecog genextract genflags gencodes genconfig \
689 genpeep gengenrtl gencheck
693 # Files to be copied away after each stage in building.
694 STAGESTUFF
= *$(objext
) insn-flags.h insn-config.h insn-codes.h \
695 insn-output.c insn-recog.c insn-emit.c insn-extract.c insn-peep.c \
696 insn-attr.h insn-attrtab.c insn-opinit.c tree-check.h \
697 s-flags s-config s-codes s-mlib s-under\
698 s-output s-recog s-emit s-extract s-peep s-check \
699 s-attr s-attrtab s-opinit s-crt s-crtS s-crt0 \
700 genemit
$(build_exeext
) genoutput
$(build_exeext
) genrecog
$(build_exeext
) \
701 genextract
$(build_exeext
) genflags
$(build_exeext
) gencodes
$(build_exeext
) \
702 genconfig
$(build_exeext
) genpeep
$(build_exeext
) genattrtab
$(build_exeext
) \
703 genattr
$(build_exeext
) genopinit
$(build_exeext
) gengenrtl
$(build_exeext
) \
704 gencheck
$(build_exeext
) \
705 xgcc
$(exeext
) xcpp
$(exeext
) cc1
$(exeext
) cpp$(exeext
) $(EXTRA_PASSES
) \
706 $(EXTRA_PARTS
) $(EXTRA_PROGRAMS
) gcc-cross
$(exeext
) \
707 $(CCCP
)$(exeext
) cc1obj
$(exeext
) enquire
$(exeext
) \
708 protoize
$(exeext
) unprotoize
$(exeext
) \
709 specs collect2
$(exeext
) $(USE_COLLECT2
) underscore.c \
711 *.greg
*.lreg
*.combine
*.flow
*.cse
*.jump
*.rtl
*.tree
*.loop \
712 *.dbr
*.jump2
*.sched
*.cse2
*.sched2
*.stack
*.gcse
*.flow2 \
716 # Members of libgcc1.a.
717 LIB1FUNCS
= _mulsi3 _udivsi3 _divsi3 _umodsi3 _modsi3 \
718 _lshrsi3 _ashrsi3 _ashlsi3 \
719 _divdf3 _muldf3 _negdf2 _adddf3 _subdf3 \
720 _fixdfsi _fixsfsi _floatsidf _floatsisf _truncdfsf2 _extendsfdf2 \
721 _addsf3 _negsf2 _subsf3 _mulsf3 _divsf3 \
722 _eqdf2 _nedf2 _gtdf2 _gedf2 _ltdf2 _ledf2 \
723 _eqsf2 _nesf2 _gtsf2 _gesf2 _ltsf2 _lesf2
725 # Library members defined in libgcc2.c.
726 LIB2FUNCS
= _muldi3 _divdi3 _moddi3 _udivdi3 _umoddi3 _negdi2 \
727 _lshrdi3 _ashldi3 _ashrdi3 _ffsdi2 \
728 _udiv_w_sdiv _udivmoddi4 _cmpdi2 _ucmpdi2 _floatdidf _floatdisf \
729 _fixunsdfsi _fixunssfsi _fixunsdfdi _fixdfdi _fixunssfdi _fixsfdi \
730 _fixxfdi _fixunsxfdi _floatdixf _fixunsxfsi \
731 _fixtfdi _fixunstfdi _floatditf \
732 __gcc_bcmp _varargs __dummy _eprintf \
733 _bb _shtab _clear_cache _trampoline __main _exit \
738 FPBIT_FUNCS
= _pack_sf _unpack_sf _addsub_sf _mul_sf _div_sf \
739 _fpcmp_parts_sf _compare_sf _eq_sf _ne_sf _gt_sf _ge_sf \
740 _lt_sf _le_sf _si_to_sf _sf_to_si _negate_sf _make_sf \
743 DPBIT_FUNCS
= _pack_df _unpack_df _addsub_df _mul_df _div_df \
744 _fpcmp_parts_df _compare_df _eq_df _ne_df _gt_df _ge_df \
745 _lt_df _le_df _si_to_df _df_to_si _negate_df _make_df \
748 # The files that "belong" in CONFIG_H are deliberately omitted
749 # because having them there would not be useful in actual practice.
750 # All they would do is cause complete recompilation every time
751 # one of the machine description files is edited.
752 # That may or may not be what one wants to do.
753 # If it is, rm *.o is an easy way to do it.
754 # CONFIG_H = $(host_xm_file) $(tm_file)
756 RTL_BASE_H
= rtl.h rtl.def machmode.h machmode.def
757 RTL_H
= $(RTL_BASE_H
) genrtl.h
758 TREE_H
= tree.h real.h tree.def machmode.h machmode.def tree-check.h
759 BASIC_BLOCK_H
= basic-block.h bitmap.h sbitmap.h
760 DEMANGLE_H
= $(srcdir)/..
/include/demangle.h
762 EXPR_H
= expr.h insn-codes.h
763 REGS_H
= regs.h varray.h machmode.h machmode.def
765 # Language makefile fragments.
767 # The following targets define the interface between us and the languages.
769 # all.build, all.cross, start.encap, rest.encap,
771 # install-normal, install-common, install-info, install-man,
772 # uninstall, distdir,
773 # mostlyclean, clean, distclean, extraclean, maintainer-clean,
774 # stage1, stage2, stage3, stage4
776 # Each language is linked in with a series of hooks (since we can't use `::'
777 # targets). The name of each hooked is "lang.${target_name}" (eg: lang.info).
778 # Configure computes and adds these here.
783 # sed inserts language fragments after the following line.
784 ####language fragments
787 # End of language makefile fragments.
789 # The only suffixes we want for implicit rules are .c and .o, so clear
790 # the list and add them. This speeds up GNU Make, and allows -r to work.
794 Makefile
: $(srcdir)/Makefile.in config.status
$(srcdir)/version.c \
795 $(xmake_file
) $(tmake_file
) $(LANG_MAKEFILES
)
796 $(SHELL
) $(srcdir)/configure.frag
$(srcdir) "$(SUBDIRS)" \
797 "$(xmake_file)" "$(tmake_file)"
798 cp config.status config.run
799 LANGUAGES
="$(CONFIG_LANGUAGES)" $(SHELL
) config.run
802 $(srcdir)/configure
: $(srcdir)/configure.in
803 cd
$(srcdir); autoconf
805 # cstamp-h.in controls rebuilding of config.in.
806 # It is named cstamp-h.in and not stamp-h.in so the mostlyclean rule doesn't
807 # delete it. A stamp file is needed as autoheader won't update the file if
808 # nothing has changed.
809 # It remains in the source directory and is part of the distribution.
810 # This follows what is done in shellutils, fileutils, etc.
811 # "echo timestamp" is used instead of touch to be consistent with other
812 # packages that use autoconf (??? perhaps also to avoid problems with patch?).
813 # ??? Newer versions have a maintainer mode that may be useful here.
814 $(srcdir)/config.in
: $(srcdir)/cstamp-h.in
815 $(srcdir)/cstamp-h.in
: $(srcdir)/configure.in
$(srcdir)/acconfig.h
816 cd
$(srcdir) && autoheader
817 @
rm -f
$(srcdir)/cstamp-h.in
818 echo timestamp
> $(srcdir)/cstamp-h.in
819 auto-host.h
: cstamp-h
; @true
820 cstamp-h
: config.in config.status
821 CONFIG_HEADERS
=auto-host.h
:config.in LANGUAGES
="$(CONFIG_LANGUAGES)" $(SHELL
) config.status
823 # Really, really stupid make features, such as SUN's KEEP_STATE, may force
824 # a target to build even if it is up-to-date. So we must verify that
825 # config.status does not exist before failing.
826 config.status
: configure version.c
827 @if
[ ! -f config.status
] ; then \
828 echo You must configure gcc. Look at the INSTALL file for details.
; \
831 LANGUAGES
="$(CONFIG_LANGUAGES)" $(SHELL
) config.status
--recheck
; \
834 all.internal
: start.encap rest.encap doc
835 # This is what to compile if making a cross-compiler.
836 # Note that we can compile enquire using the cross-compiler just built,
837 # although we can't run it on this machine.
838 all.cross
: native gcc-cross specs stmp-headers
$(STMP_FIXPROTO
) $(LIBGCC
) \
839 $(LIBGCC1_TEST
) $(EXTRA_PARTS
) lang.
all.cross doc
840 # This is what to compile if making gcc with a cross-compiler.
841 all.build
: native xgcc
$(exeext
) xcpp
$(exeext
) $(EXTRA_PARTS
) lang.
all.build
842 # This is what must be made before installing GCC and converting libraries.
843 start.encap
: native xgcc
$(exeext
) xcpp
$(exeext
) specs
$(LIBGCC1
) \
844 xlimits.h lang.start.encap
845 # These can't be made until after GCC can run.
846 rest.encap
: stmp-headers
$(STMP_FIXPROTO
) $(LIBGCC
) $(EXTRA_PARTS
) lang.rest.encap
847 # This is what is made with the host's compiler
848 # whether making a cross compiler or not.
849 native
: config.status auto-host.h
cpp$(exeext
) intl.
all $(LANGUAGES
) \
850 $(EXTRA_PASSES
) $(EXTRA_PROGRAMS
) $(USE_COLLECT2
)
852 # Define the names for selecting languages in LANGUAGES.
856 # Tell GNU make these are phony targets.
857 .PHONY
: C c PROTO proto
859 # On the target machine, finish building a cross compiler.
860 # This does the things that can't be done on the host machine.
861 rest.cross
: $(LIBGCC
) specs
863 # Verify that it works to compile and link libgcc1-test.
864 # If it does, then there are sufficient replacements for libgcc1.a.
865 libgcc1-test
: libgcc1-test.o native
$(GCC_PARTS
)
866 @echo
"Testing libgcc1. Ignore linker warning messages."
867 $(GCC_FOR_TARGET
) $(GCC_CFLAGS
) libgcc1-test.o
-o libgcc1-test \
868 -nostartfiles
-nostdlib
`$(GCC_FOR_TARGET) --print-libgcc-file-name`
869 libgcc1-test.o
: libgcc1-test.c native xgcc
$(exeext
)
870 $(GCC_FOR_TARGET
) $(GCC_CFLAGS
) $(ALL_CPPFLAGS
) -c
$(srcdir)/libgcc1-test.c
872 # Recompile all the language-independent object files.
873 # This is used only if the user explicitly asks for it.
874 compilations
: ${OBJS}
876 # Create a list of the language-independent object files so the language
877 # subdirectories needn't mention their names explicitly.
878 stamp-objlist
: $(OBJS
)
879 echo
" $(OBJS)" | sed
-e
's, \([a-z0-9]\), ../\1,g' -e
's/\.o/$(objext)/g' >stamp-objlist
881 # We call this executable `xgcc' rather than `gcc'
882 # to avoid confusion if the current directory is in the path
883 # and CC is `gcc'. It is renamed to `gcc' when it is installed.
884 xgcc
$(exeext
): gcc.o gccspec.o version.o intl.o
prefix.o \
885 version.o
$(LIBDEPS
) $(EXTRA_GCC_OBJS
)
886 $(CC
) $(ALL_CFLAGS
) $(LDFLAGS
) -o
$@ gcc.o gccspec.o intl.o \
887 prefix.o version.o
$(EXTRA_GCC_OBJS
) $(LIBS
)
889 # We call this executable `xcpp' rather than `cpp'
890 # since the real preprocessor is named `cpp'. It too is renamed
891 # when it is installed.
892 # The only difference from xgcc is that it's linked with cppspec.o
893 # instead of gccspec.o.
894 xcpp
$(exeext
): gcc.o cppspec.o version.o intl.o
prefix.o \
895 version.o
$(LIBDEPS
) $(EXTRA_GCC_OBJS
)
896 $(CC
) $(ALL_CFLAGS
) $(LDFLAGS
) -o
$@ gcc.o cppspec.o intl.o \
897 prefix.o version.o
$(EXTRA_GCC_OBJS
) $(LIBS
)
899 # Dump a specs file to make -B./ read these specs over installed ones.
901 $(GCC_FOR_TARGET
) -dumpspecs
> tmp-specs
904 # We do want to create an executable named `xgcc', so we can use it to
906 # Also create gcc-cross, so that install-common will install properly.
907 gcc-cross
: xgcc
$(exeext
)
908 cp xgcc
$(exeext
) gcc-cross
$(exeext
)
910 cc1
$(exeext
): $(P
) $(OBJS
) $(C_OBJS
) $(LIBDEPS
)
911 $(CC
) $(ALL_CFLAGS
) $(LDFLAGS
) -o
$@
$(OBJS
) $(C_OBJS
) $(LIBS
)
913 # Build the version of limits.h that we will install.
914 xlimits.h
: glimits.h limitx.h limity.h
915 if
$(LIMITS_H_TEST
) ; then \
916 cat
$(srcdir)/limitx.h
$(srcdir)/glimits.h
$(srcdir)/limity.h
> tmp-xlimits.h
; \
918 cat
$(srcdir)/glimits.h
> tmp-xlimits.h
; \
920 mv tmp-xlimits.h xlimits.h
923 # This is done in two parts because some functions, in libgcc1.c,
924 # must be compiled with something other than GCC,
925 # while the rest, in libgcc2.c, must be compiled with xgcc.
926 # That means we can't do libgcc2.c until after xgcc, cc1, etc.
928 # Use this as value of LIBGCC1 to cause conversion to GNU library format.
929 # LIBCONVERT should put its output in libgcc1.conv.
930 libgcc1.conv
: libgcc1.a
931 $(LIBCONVERT
) libgcc1.a libgcc1.conv
933 # Use this as value of LIBGCC1 to inhibit use of libgcc1.c entirely.
934 # Make an empty file instead.
935 libgcc1.null
: $(GCC_PASSES
)
936 echo
"void __foo () {}" > dummy.c
937 $(GCC_FOR_TARGET
) $(GCC_CFLAGS
) -c dummy.c
938 $(AR_FOR_TARGET
) $(AR_FLAGS_FOR_TARGET
) libgcc1.null dummy
$(objext
)
939 rm -f dummy
$(objext
) dummy.c
941 # This is $(LIBGCC1) for a cross-compiler.
942 # We have no automatic way of building libgcc1.a,
943 # so it's up to the installer to find a way to do that.
944 # This rule deliberately does not depend on libgcc1.a
945 # so that it will fail if the installer hasn't provided it.
947 mv libgcc1.a libgcc1.cross ||
(echo You must find a way to make libgcc1.a
; false
)
949 # Compile the library of arithmetic subroutines with the native compiler.
950 # Don't compile it with GCC!
951 # (That would cause most arithmetic functions to call themselves.)
953 # NOTE: If you modify these rules substantially, please be sure to
954 # check at least config/i386/t-sco5 and possibly other makefile
956 libgcc1.a
: libgcc1.c
$(CONFIG_H
) $(LIB1FUNCS_EXTRA
) config.status
958 # Actually build it in tmplibgcc1.a, then rename at end,
959 # so that libgcc1.a itself remains nonexistent if compilation is aborted.
960 # -e causes any failing command to make this rule fail.
961 # -e doesn't work in certain shells, so we test $$? as well.
962 # lynx has a broken ar, it always complains when the initial library is
963 # empty, thus this command works only if we don't do -e
964 # There is a trailing backslash (\) deleted from the following line.
966 for name in
$(LIB1FUNCS
); \
969 rm -f
$${name}$(objext
); \
970 $(OLDCC
) -DIN_LIBGCC1
$(CCLIBFLAGS
) $(INCLUDES
) -c
-DL
$${name} $(srcdir)/libgcc1.c
; \
971 if
[ $$?
-eq
0 ] ; then true
; else exit
1; fi
; \
972 mv libgcc1
$(objext
) $${name}$(objext
); \
973 $(OLDAR
) $(OLDAR_FLAGS
) tmplibgcc1.a
$${name}$(objext
); \
974 rm -f
$${name}$(objext
); \
976 # Some shells crash when a loop has no items.
977 # So make sure there is always at least one--`..'.
979 # We don't use -e here because there are if statements
980 # that should not make the command give up when the if condition is false.
981 # Instead, we test for failure after each command where it matters.
982 for file in ..
$(LIB1FUNCS_EXTRA
); \
984 if
[ x
$${file} != x..
]; then \
985 name
=`echo $${file} | sed -e 's/[.][cS]$$//' -e 's/[.]asm$$//'`; \
987 if
[ $${name}.asm
= $${file} ]; then \
988 cp
$${file} $${name}.s || exit
1; file
=$${name}.s
; \
990 $(OLDCC
) -DIN_LIBGCC1
$(CCLIBFLAGS
) $(INCLUDES
) -c
$${file}; \
991 if
[ $$?
-eq
0 ] ; then true
; else exit
1; fi
; \
992 $(OLDAR
) $(OLDAR_FLAGS
) tmplibgcc1.a
$${name}$(objext
); \
993 if
[ $$?
-eq
0 ] ; then true
; else exit
1; fi
; \
994 rm -f
$${name}.s
$${name}$(objext
); \
998 -if
$(RANLIB_TEST_FOR_TARGET
) ; then \
999 $(RANLIB_FOR_TARGET
) tmplibgcc1.a
; \
1001 mv tmplibgcc1.a libgcc1.a
1003 # Build libgcc1.a from assembler source. LIB1ASMFUNCS is the list of
1004 # functions. LIB1ASMSRC is the name of the source file in the config
1006 libgcc1-asm.a
: libgcc2.ready config.status
$(srcdir)/config
/$(LIB1ASMSRC
)
1007 -rm -f tmplibgcc1.a libgcc1.S
1008 cp
$(srcdir)/config
/$(LIB1ASMSRC
) libgcc1.S
1009 # Actually build it in tmplibgcc1.a, then rename at end,
1010 # so that libgcc1-asm.a itself remains nonexistent if compilation is aborted.
1011 # -e causes any failing command to make this rule fail.
1012 # -e doesn't work in certain shells, so we test $$? as well.
1013 # lynx has a broken ar, it always complains when the initial library is
1014 # empty, thus this command works only if we don't do -e
1015 # There is a trailing backslash (\) deleted from the following line.
1017 for name in
$(LIB1ASMFUNCS
); \
1020 $(GCC_FOR_TARGET
) $(LIBGCC2_CFLAGS
) $(INCLUDES
) -c
-DL
$${name} libgcc1.S
; \
1021 if
[ $$?
-eq
0 ] ; then true
; else exit
1; fi
; \
1022 mv libgcc1
$(objext
) $${name}$(objext
); \
1023 $(AR_FOR_TARGET
) $(AR_FLAGS_FOR_TARGET
) tmplibgcc1.a
$${name}$(objext
); \
1024 rm -f
$${name}$(objext
); \
1027 mv tmplibgcc1.a libgcc1-asm.a
1029 # Generate assembly versions of the functions required for libgcc1.
1030 # You'll still need to massage the code by hand (possibly hacking
1031 # underscores and local labels) but this will get you started.
1032 libgcc1.S
: libgcc1.c
$(CONFIG_H
) config.status
1035 for name in
$(LIB1FUNCS
); \
1038 $(OLDCC
) -DIN_LIBGCC1
$(CCLIBFLAGS
) $(INCLUDES
) -S
-DL
$${name} $(srcdir)/libgcc1.c
; \
1039 if
[ $$?
-eq
0 ] ; then true
; else exit
1; fi
; \
1040 echo
'#ifdef ' L
$${name} >> libgcc1.S
; \
1041 cat libgcc1.s
>> libgcc1.S
; \
1042 echo
'#endif /*' L
$${name} '*/' >> libgcc1.S
; \
1043 echo
"" >> libgcc1.S
; \
1046 # Compiling libgcc2.a requires making sure that cc1, etc. have been compiled.
1047 # But recompiling cc1 should not force recompilation of libgcc2.a.
1048 # If you want to force recompilation, delete libgcc2.a.
1049 libgcc2.ready
: $(GCC_PASSES
) $(LIBGCC2_DEPS
) stmp-int-hdrs
$(STMP_FIXPROTO
)
1050 -if
[ -f libgcc2.ready
] ; then \
1053 touch libgcc2.ready
; \
1056 LIB2ADD
= $(srcdir)/frame.c
$(LIB2FUNCS_EXTRA
) $(LANG_LIB2FUNCS
)
1057 libgcc2.a
: libgcc2.c libgcc2.ready
$(CONFIG_H
) $(FPBIT
) $(DPBIT
) $(LIB2ADD
) \
1058 machmode.h longlong.h frame.h gbl-ctors.h config.status
1059 # Actually build it in tmplibgcc2.a, then rename at end,
1060 # so that libgcc2.a itself remains nonexistent if compilation is aborted.
1062 # -e causes any failing command to make this rule fail.
1063 # -e doesn't work in certain shells, so we test $$? as well.
1064 # lynx has a broken ar, it always complains when the initial library is
1065 # empty, thus this command works only if we don't do -e
1066 # There is a trailing backslash (\) deleted from the following line.
1068 for name in
$(LIB2FUNCS
); \
1071 $(GCC_FOR_TARGET
) $(LIBGCC2_CFLAGS
) $(INCLUDES
) -c
-DL
$${name} \
1072 $(srcdir)/libgcc2.c
-o
$${name}$(objext
); \
1073 if
[ $$?
-eq
0 ] ; then true
; else exit
1; fi
; \
1074 $(AR_FOR_TARGET
) $(AR_FLAGS_FOR_TARGET
) tmplibgcc2.a
$${name}$(objext
); \
1075 rm -f
$${name}$(objext
); \
1077 for name in
$(LIB2FUNCS_EH
); \
1080 $(GCC_FOR_TARGET
) $(LIBGCC2_CFLAGS
) -fexceptions
$(INCLUDES
) -c \
1081 -DL
$${name} $(srcdir)/libgcc2.c
-o
$${name}$(objext
); \
1082 if
[ $$?
-eq
0 ] ; then true
; else exit
1; fi
; \
1083 $(AR_FOR_TARGET
) $(AR_FLAGS_FOR_TARGET
) tmplibgcc2.a
$${name}$(objext
); \
1084 rm -f
$${name}$(objext
); \
1086 if
[ x
$(FPBIT
) != x
]; then \
1087 for name in
$(FPBIT_FUNCS
); \
1090 $(GCC_FOR_TARGET
) $(LIBGCC2_CFLAGS
) $(INCLUDES
) -c
-DL
$${name} \
1091 -DFINE_GRAINED_LIBRARIES
$(FPBIT
) -o
$${name}$(objext
); \
1092 if
[ $$?
-eq
0 ] ; then true
; else exit
1; fi
; \
1093 $(AR_FOR_TARGET
) $(AR_FLAGS_FOR_TARGET
) tmplibgcc2.a
$${name}$(objext
); \
1094 rm -f
$${name}$(objext
); \
1097 if
[ x
$(DPBIT
) != x
]; then \
1098 for name in
$(DPBIT_FUNCS
); \
1101 $(GCC_FOR_TARGET
) $(LIBGCC2_CFLAGS
) $(INCLUDES
) -c
-DL
$${name} \
1102 -DFINE_GRAINED_LIBRARIES
$(DPBIT
) -o
$${name}$(objext
); \
1103 if
[ $$?
-eq
0 ] ; then true
; else exit
1; fi
; \
1104 $(AR_FOR_TARGET
) $(AR_FLAGS_FOR_TARGET
) tmplibgcc2.a
$${name}$(objext
); \
1105 rm -f
$${name}$(objext
); \
1108 # Some shells crash when a loop has no items.
1109 # So make sure there is always at least one--`..'.
1111 # We don't use -e here because there are if statements
1112 # that should not make the command give up when the if condition is false.
1113 # Instead, we test for failure after each command where it matters.
1114 for file in
$(LIB2ADD
); do \
1115 name
=`echo $${file} | sed -e 's/[.][cSo]$$//' -e 's/[.]asm$$//' -e 's/[.]txt$$//'`; \
1116 oname
=` echo $${name} | sed -e 's,.*/,,'`; \
1117 if
[ $${name}.txt
= $${file} ]; then \
1118 for f in ..
`cat $${file}`; do if
[ x
$${f} != x..
]; then \
1119 $(MAKE
) GCC_FOR_TARGET
="$(GCC_FOR_TARGET)" \
1120 AR_FOR_TARGET
="$(AR_FOR_TARGET)" \
1121 AR_FLAGS_FOR_TARGET
="$(AR_FLAGS_FOR_TARGET)" CC
="$(CC)" \
1122 CFLAGS
="$(CFLAGS)" HOST_PREFIX
="$(HOST_PREFIX)" \
1123 HOST_PREFIX_1
="$(HOST_PREFIX_1)" \
1124 LANGUAGES
="$(LANGUAGES)" \
1125 LIBGCC2_CFLAGS
="$(LIBGCC2_CFLAGS)" $${f}; \
1126 if
[ $$?
-eq
0 ] ; then true
; else exit
1; fi
; \
1127 $(AR_FOR_TARGET
) $(AR_FLAGS_FOR_TARGET
) tmplibgcc2.a
$${f}; \
1133 if
[ $${name}.asm
= $${file} ]; then \
1134 cp
$${file} $${name}.s || exit
1; file
=$${name}.s
; \
1136 $(GCC_FOR_TARGET
) $(LIBGCC2_CFLAGS
) $(INCLUDES
) -c
$${file}; \
1137 if
[ $$?
-eq
0 ] ; then true
; else exit
1; fi
; \
1138 $(AR_FOR_TARGET
) $(AR_FLAGS_FOR_TARGET
) tmplibgcc2.a
$${oname}$(objext
); \
1139 rm -f
$${name}.s
$${oname}$(objext
); \
1142 mv tmplibgcc2.a libgcc2.a
1143 # These lines were deleted from above the mv command
1144 # because ranlibing libgcc.a itself should suffice.
1145 # -if [ x${HPUX_GAS} = x ] ; then \
1146 # if $(RANLIB_TEST_FOR_TARGET) ; then \
1147 # $(RANLIB_FOR_TARGET) tmplibgcc2.a;
1151 # Combine the various libraries into a single library, libgcc.a.
1152 libgcc.a
: $(LIBGCC1
) $(LIBGCC2
)
1153 -rm -rf tmplibgcc.a libgcc.a tmpcopy
1155 -if
[ x
$(LIBGCC1
) != x
]; \
1156 then
(cd tmpcopy
; $(AR_FOR_TARGET
) x ..
/$(LIBGCC1
)); \
1159 # Some versions of ar (specifically the one in RISC/os 5.x), create an
1160 # unwritable table of contents file, and then print an error message when
1161 # the second ar command tries to overwrite this file. To avoid the error
1162 # message from ar, we make sure all files are writable.
1163 -(cd tmpcopy
; chmod
+w
* > /dev
/null
2>&1)
1164 (cd tmpcopy
; $(AR_FOR_TARGET
) x ..
/$(LIBGCC2
))
1165 (cd tmpcopy
; $(AR_FOR_TARGET
) $(AR_FLAGS_FOR_TARGET
) ..
/tmplibgcc.a
*$(objext
))
1167 -if
$(RANLIB_TEST_FOR_TARGET
) ; then \
1168 $(RANLIB_FOR_TARGET
) tmplibgcc.a
; \
1170 # Actually build it in tmplibgcc.a, then rename at end,
1171 # so that libgcc.a itself remains nonexistent if compilation is aborted.
1172 mv tmplibgcc.a libgcc.a
1174 # Use the genmultilib shell script to generate the information the gcc
1175 # driver program needs to select the library directory based on the
1177 multilib.h
: s-mlib
; @true
1178 s-mlib
: $(srcdir)/genmultilib Makefile
1179 $(SHELL
) $(srcdir)/genmultilib \
1180 "$(MULTILIB_OPTIONS)" \
1181 "$(MULTILIB_DIRNAMES)" \
1182 "$(MULTILIB_MATCHES)" \
1183 "$(MULTILIB_EXCEPTIONS)" \
1184 "$(MULTILIB_EXTRA_OPTS)" > tmp-mlib.h
1185 $(srcdir)/move-if-change tmp-mlib.h multilib.h
1188 # Build multiple copies of libgcc.a, one for each target switch.
1189 stmp-multilib
: $(LIBGCC1
) libgcc2.c libgcc2.ready
$(CONFIG_H
) \
1191 $(LIB2ADD
) machmode.h longlong.h gbl-ctors.h config.status
1192 for i in
`$(GCC_FOR_TARGET) --print-multi-lib`; do \
1193 dir=`echo $$i | sed -e 's/;.*$$//'`; \
1194 flags
=`echo $$i | sed -e 's/^[^;]*;//' -e 's/@/ -/g'`; \
1195 $(MAKE
) GCC_FOR_TARGET
="$(GCC_FOR_TARGET)" \
1196 AR_FOR_TARGET
="$(AR_FOR_TARGET)" \
1197 AR_FLAGS_FOR_TARGET
="$(AR_FLAGS_FOR_TARGET)" \
1198 CC
="$(CC)" CFLAGS
="$(CFLAGS)" \
1199 RANLIB_FOR_TARGET
="$(RANLIB_FOR_TARGET)" \
1200 RANLIB_TEST_FOR_TARGET
="$(RANLIB_TEST_FOR_TARGET)" \
1201 LANGUAGES
="$(LANGUAGES)" \
1202 HOST_PREFIX
="$(HOST_PREFIX)" HOST_PREFIX_1
="$(HOST_PREFIX_1)" \
1203 LIBGCC2_CFLAGS
="$(LIBGCC2_CFLAGS) $${flags}" \
1204 MULTILIB_CFLAGS
="$${flags}" \
1205 LIBGCC1
="$(LIBGCC1)" LIBGCC2
="$(LIBGCC2)" \
1206 dir="$${dir}" stmp-multilib-sub
; \
1207 if
[ $$?
-eq
0 ] ; then true
; else exit
1; fi
; \
1211 # Subroutine of stmp-multilib so make -n works.
1214 if
[ -d
$(dir) ]; then \
1216 rm -f libgcc.a
$(EXTRA_MULTILIB_PARTS
); \
1219 $(MAKE
) GCC_FOR_TARGET
="$(GCC_FOR_TARGET)" \
1220 AR_FOR_TARGET
="$(AR_FOR_TARGET)" \
1221 AR_FLAGS_FOR_TARGET
="$(AR_FLAGS_FOR_TARGET)" \
1222 CC
="$(CC)" CFLAGS
="$(CFLAGS)" \
1223 HOST_PREFIX
="$(HOST_PREFIX)" HOST_PREFIX_1
="$(HOST_PREFIX_1)" \
1224 LANGUAGES
="$(LANGUAGES)" \
1225 LIBGCC2_CFLAGS
="$(LIBGCC2_CFLAGS)" $(LIBGCC2
)
1226 if
[ x
$(LIBGCC1
) != xlibgcc1-asm.a
]; \
1228 else rm -f
$(LIBGCC1
); \
1230 if
[ x
$(LIBGCC1
) != xlibgcc1-asm.a
]; \
1233 $(MAKE
) GCC_FOR_TARGET
="$(GCC_FOR_TARGET)" \
1234 AR_FOR_TARGET
="$(AR_FOR_TARGET)" \
1235 AR_FLAGS_FOR_TARGET
="$(AR_FLAGS_FOR_TARGET)" \
1236 CC
="$(CC)" CFLAGS
="$(CFLAGS)" \
1237 HOST_PREFIX
="$(HOST_PREFIX)" HOST_PREFIX_1
="$(HOST_PREFIX_1)" \
1238 LANGUAGES
="$(LANGUAGES)" \
1239 LIBGCC2_CFLAGS
="$(LIBGCC2_CFLAGS)" $(LIBGCC1
); \
1241 rm -rf tmplibgcc.a tmpcopy
1243 if
[ x
$(LIBGCC1
) != x
]; \
1244 then
(cd tmpcopy
; $(AR_FOR_TARGET
) x ..
/$(LIBGCC1
)); \
1247 (cd tmpcopy
; $(AR_FOR_TARGET
) x ..
/$(LIBGCC2
))
1248 (cd tmpcopy
; $(AR_FOR_TARGET
) $(AR_FLAGS_FOR_TARGET
) ..
/tmplibgcc.a
*$(objext
))
1249 rm -rf libgcc2.a tmpcopy
1250 if
$(RANLIB_TEST_FOR_TARGET
) ; then \
1251 $(RANLIB_FOR_TARGET
) tmplibgcc.a
; \
1253 if
[ -d
$(dir) ]; then true
; else mkdir
$(dir); fi
1254 mv tmplibgcc.a
$(dir)/libgcc.a
1255 for f in ..
$(EXTRA_MULTILIB_PARTS
); do if
[ x
$${f} != x..
]; then \
1256 $(MAKE
) GCC_FOR_TARGET
="$(GCC_FOR_TARGET)" \
1257 AR_FOR_TARGET
="$(AR_FOR_TARGET)" \
1258 AR_FLAGS_FOR_TARGET
="$(AR_FLAGS_FOR_TARGET)" \
1259 CC
="$(CC)" CFLAGS
="$(CFLAGS)" \
1260 HOST_PREFIX
="$(HOST_PREFIX)" HOST_PREFIX_1
="$(HOST_PREFIX_1)" \
1261 LANGUAGES
="$(LANGUAGES)" \
1262 MULTILIB_CFLAGS
="$(MULTILIB_CFLAGS)" T
="t" t
$${f}; \
1263 mv t
$${f} $(dir)/$${f}; \
1267 # Compile two additional files that are linked with every program
1268 # linked using GCC on systems using COFF or ELF, for the sake of C++
1270 $(T
)crtbegin.o
: crtstuff.c
$(GCC_PASSES
) $(CONFIG_H
) \
1271 defaults.h frame.h gbl-ctors.h
1272 $(GCC_FOR_TARGET
) $(GCC_CFLAGS
) $(INCLUDES
) $(MULTILIB_CFLAGS
) -g0 \
1273 -finhibit-size-directive
-fno-inline-functions
-fno-exceptions
$(CRTSTUFF_T_CFLAGS
) \
1274 -c
$(srcdir)/crtstuff.c
-DCRT_BEGIN
-o
$(T
)crtbegin
$(objext
)
1276 $(T
)crtend.o
: crtstuff.c
$(GCC_PASSES
) $(CONFIG_H
) \
1277 defaults.h frame.h gbl-ctors.h
1278 $(GCC_FOR_TARGET
) $(GCC_CFLAGS
) $(INCLUDES
) $(MULTILIB_CFLAGS
) -g0 \
1279 -finhibit-size-directive
-fno-inline-functions
-fno-exceptions
$(CRTSTUFF_T_CFLAGS
) \
1280 -c
$(srcdir)/crtstuff.c
-DCRT_END
-o
$(T
)crtend
$(objext
)
1282 # On some systems we also want to install versions of these files
1283 # compiled using PIC for use in shared libraries.
1284 crtbeginS.o crtendS.o
: s-crtS
; @true
1286 s-crtS
: crtstuff.c
$(GCC_PASSES
) $(CONFIG_H
) \
1287 defaults.h frame.h gbl-ctors.h
1288 $(GCC_FOR_TARGET
) $(GCC_CFLAGS
) $(INCLUDES
) $(CRTSTUFF_T_CFLAGS_S
) \
1289 -DCRT_BEGIN
-DCRTSTUFFS_O
-finhibit-size-directive
-fno-inline-functions \
1290 -fno-exceptions
-g0
-c
$(srcdir)/crtstuff.c
1291 mv crtstuff
$(objext
) crtbeginS
$(objext
)
1292 $(GCC_FOR_TARGET
) $(GCC_CFLAGS
) $(INCLUDES
) $(CRTSTUFF_T_CFLAGS_S
) \
1293 -DCRT_END
-DCRTSTUFFS_O
-finhibit-size-directive
-fno-inline-functions \
1294 -fno-exceptions
-g0
-c
$(srcdir)/crtstuff.c
-o crtendS
$(objext
)
1297 # Compile the start modules crt0.o and mcrt0.o that are linked with every program
1298 crt0.o
: s-crt0
; @true
1299 mcrt0.o
: s-crt0
; @true
1301 s-crt0
: $(CRT0_S
) $(MCRT0_S
) $(GCC_PASSES
) $(CONFIG_H
)
1302 $(GCC_FOR_TARGET
) $(GCC_CFLAGS
) $(CRT0STUFF_T_CFLAGS
) \
1303 -o crt0.o
-c
$(CRT0_S
)
1304 $(GCC_FOR_TARGET
) $(GCC_CFLAGS
) $(CRT0STUFF_T_CFLAGS
) \
1305 -o mcrt0.o
-c
$(MCRT0_S
)
1308 # Compiling object files from source files.
1310 # Note that dependencies on obstack.h are not written
1311 # because that file is not part of GCC.
1313 # C language specific files.
1315 c-parse.o
: $(srcdir)/c-parse.c
$(CONFIG_H
) $(TREE_H
) c-lex.h \
1316 $(srcdir)/c-parse.h c-tree.h input.h flags.h system.h toplev.h
1317 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) -c
$(srcdir)/c-parse.c
1318 $(srcdir)/c-parse.h
: $(srcdir)/c-parse.c
1319 $(srcdir)/c-parse.c
: $(srcdir)/c-parse.y
1320 cd
$(srcdir); $(BISON
) $(BISONFLAGS
) -d c-parse.y
-o c-parse.c
1321 $(srcdir)/c-parse.y
: c-parse.in
1322 echo
'/*WARNING: This file is automatically generated!*/' >tmp-c-parse.y
1323 sed
-e
"/^ifobjc$$/,/^end ifobjc$$/d" \
1324 -e
"/^ifc$$/d" -e
"/^end ifc$$/d" \
1325 $(srcdir)/c-parse.in
>>tmp-c-parse.y
1326 $(srcdir)/move-if-change tmp-c-parse.y
$(srcdir)/c-parse.y
1328 $(srcdir)/c-gperf.h
: c-parse.gperf
1329 gperf
-L C
-F
', 0, 0' -p
-j1
-i
1 -g
-o
-t
-G
-N is_reserved_word \
1330 -k1
,3,$$ $(srcdir)/c-parse.gperf
>tmp-gperf.h
1331 $(srcdir)/move-if-change tmp-gperf.h
$(srcdir)/c-gperf.h
1333 c-decl.o
: c-decl.c
$(CONFIG_H
) system.h
$(TREE_H
) c-tree.h c-lex.h flags.h \
1335 c-typeck.o
: c-typeck.c
$(CONFIG_H
) system.h
$(TREE_H
) c-tree.h flags.h \
1336 intl.h output.h
$(EXPR_H
) $(RTL_H
) toplev.h
1337 c-lang.o
: c-lang.c
$(CONFIG_H
) system.h
$(TREE_H
) c-tree.h c-lex.h toplev.h \
1339 c-lex.o
: c-lex.c
$(CONFIG_H
) system.h
$(TREE_H
) $(RTL_H
) c-lex.h c-tree.h \
1340 $(srcdir)/c-parse.h input.h intl.h flags.h
$(srcdir)/c-gperf.h c-pragma.h \
1341 toplev.h output.h mbchar.h
1342 c-aux-info.o
: c-aux-info.c
$(CONFIG_H
) system.h
$(TREE_H
) c-tree.h flags.h
1343 c-convert.o
: c-convert.c
$(CONFIG_H
) system.h
$(TREE_H
) flags.h toplev.h
1344 c-pragma.o
: c-pragma.c
$(CONFIG_H
) system.h
$(RTL_H
) $(TREE_H
) except.h \
1345 function.h defaults.h c-pragma.h toplev.h
1346 c-iterate.o
: c-iterate.c
$(CONFIG_H
) system.h
$(TREE_H
) $(RTL_H
) c-tree.h \
1347 flags.h toplev.h
$(EXPR_H
)
1348 mbchar.o
: mbchar.c
$(CONFIG_H
) system.h mbchar.h
1349 graph.o
: graph.c
$(CONFIG_H
) system.h toplev.h flags.h output.h
$(RTL_H
) \
1350 hard-reg-set.h
$(BASIC_BLOCK_H
)
1351 sbitmap.o
: sbitmap.c
$(CONFIG_H
) system.h
$(RTL_H
) flags.h
$(BASIC_BLOCK_H
)
1353 COLLECT2_OBJS
= collect2.o tlink.o hash.o intl.o underscore.o version.o
1354 collect2
$(exeext
): $(COLLECT2_OBJS
) $(LIBDEPS
)
1355 # Don't try modifying collect2 (aka ld) in place--it might be linking this.
1356 -rm -f collect2
$(exeext
)
1357 $(CC
) $(ALL_CFLAGS
) $(LDFLAGS
) -o
$@
$(COLLECT2_OBJS
) $(LIBS
)
1359 collect2.o
: collect2.c
$(CONFIG_H
) system.h gstab.h intl.h \
1360 $(srcdir)/..
/include/obstack.h
$(DEMANGLE_H
) collect2.h
1361 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) \
1362 -DTARGET_MACHINE
=\"$(target_alias
)\" $(MAYBE_USE_COLLECT2
) \
1363 -c
`echo $(srcdir)/collect2.c | sed 's,^\./,,'`
1365 tlink.o
: tlink.c
$(DEMANGLE_H
) hash.h
$(CONFIG_H
) system.h toplev.h collect2.h
1366 hash.o
: hash.c hash.h system.h toplev.h
1368 vfprintf.o
: $(srcdir)/..
/libiberty
/vfprintf.c
$(CONFIG_H
) system.h
1370 $(LN_S
) $(srcdir)/..
/libiberty
/vfprintf.c vfprintf.c
1371 $(CC
) -c
$(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) vfprintf.c
1373 splay-tree.o
: $(srcdir)/..
/libiberty
/splay-tree.c \
1374 $(srcdir)/..
/include/splay-tree.h
$(srcdir)/..
/include/libiberty.h
1376 $(LN_S
) $(srcdir)/..
/libiberty
/splay-tree.c splay-tree.c
1377 $(CC
) -c
$(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) splay-tree.c
1379 underscore.c
: s-under
; @true
1381 s-under
: $(GCC_PASSES
)
1382 echo
"int xxy_us_dummy;" >tmp-dum.c
1383 $(GCC_FOR_TARGET
) -S tmp-dum.c
1384 echo
'/*WARNING: This file is automatically generated!*/' >tmp-under.c
1385 if grep _xxy_us_dummy tmp-dum.s
> /dev
/null
; then \
1386 echo
"int prepends_underscore = 1;" >>tmp-under.c
; \
1388 echo
"int prepends_underscore = 0;" >>tmp-under.c
; \
1390 $(srcdir)/move-if-change tmp-under.c underscore.c
1391 -rm -f tmp-dum.c tmp-dum.s
1394 # A file used by all variants of C.
1396 c-common.o
: c-common.c
$(CONFIG_H
) system.h
$(TREE_H
) c-tree.h c-lex.h \
1397 flags.h toplev.h output.h c-pragma.h
$(RTL_H
)
1399 # Language-independent files.
1402 -DSTANDARD_STARTFILE_PREFIX
=\"$(libdir)/\" \
1403 -DSTANDARD_EXEC_PREFIX
=\"$(libdir)/gcc-lib
/\" \
1404 -DDEFAULT_TARGET_VERSION
=\"$(version
)\" \
1405 -DDEFAULT_TARGET_MACHINE
=\"$(target_alias
)\" \
1406 -DTOOLDIR_BASE_PREFIX
=\"$(exec_prefix)/\"
1407 gcc.o
: gcc.c
$(CONFIG_H
) system.h intl.h multilib.h \
1408 Makefile
$(lang_specs_files
) prefix.h
1409 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) \
1411 -c
`echo $(srcdir)/gcc.c | sed 's,^\./,,'`
1413 gccspec.o
: gccspec.c
$(CONFIG_H
) system.h
1414 cppspec.o
: cppspec.c
$(CONFIG_H
) system.h
1416 tree-check.h
: s-check
; @true
1417 s-check
: gencheck
$(srcdir)/move-if-change
1418 .
/gencheck
> tmp-check.h
1419 $(srcdir)/move-if-change tmp-check.h tree-check.h
1422 gencheck
: gencheck.o
$(lang_tree_files
) $(HOST_LIBDEPS
)
1423 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1424 gencheck.o
$(HOST_LIBS
)
1426 gencheck.o
: gencheck.c tree.def
$(CONFIG_H
) hconfig.h system.h
1427 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) \
1428 $(srcdir)/gencheck.c
1430 dumpvers
: dumpvers.c
1432 version.o
: version.c
1433 obstack.o
: $(srcdir)/..
/libiberty
/obstack.c
$(CONFIG_H
)
1435 $(LN_S
) $(srcdir)/..
/libiberty
/obstack.c obstack.c
1436 $(CC
) -c
$(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) obstack.c
1438 prefix.o
: prefix.c
$(CONFIG_H
) system.h Makefile
prefix.h
1439 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) \
1440 -DPREFIX
=\"$(prefix)\" \
1441 -c
`echo $(srcdir)/prefix.c | sed 's,^\./,,'`
1443 convert.o
: convert.c
$(CONFIG_H
) $(TREE_H
) flags.h convert.h toplev.h
1445 tree.o
: tree.c
$(CONFIG_H
) system.h
$(TREE_H
) flags.h function.h toplev.h except.h
1446 print-tree.o
: print-tree.c
$(CONFIG_H
) system.h
$(TREE_H
)
1447 stor-layout.o
: stor-layout.c
$(CONFIG_H
) system.h
$(TREE_H
) flags.h \
1448 function.h
$(EXPR_H
) $(RTL_H
) toplev.h except.h
1449 fold-const.o
: fold-const.c
$(CONFIG_H
) system.h
$(TREE_H
) flags.h toplev.h \
1451 toplev.o
: toplev.c
$(CONFIG_H
) system.h
$(TREE_H
) $(RTL_H
) \
1452 flags.h input.h insn-attr.h xcoffout.h defaults.h output.h \
1453 insn-codes.h insn-config.h intl.h
$(RECOG_H
) Makefile toplev.h dwarfout.h \
1454 dwarf2out.h sdbout.h dbxout.h
$(EXPR_H
) $(BASIC_BLOCK_H
) \
1455 $(lang_options_files
)
1456 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) $(MAYBE_USE_COLLECT2
) \
1457 -DTARGET_NAME
=\"$(target_alias
)\" \
1458 -c
`echo $(srcdir)/toplev.c | sed 's,^\./,,'`
1460 rtl.o
: rtl.c
$(CONFIG_H
) system.h
$(RTL_H
) bitmap.h
1462 print-rtl.o
: print-rtl.c
$(CONFIG_H
) system.h
$(RTL_H
) bitmap.h basic-block.h
1463 rtlanal.o
: rtlanal.c
$(CONFIG_H
) system.h
$(RTL_H
)
1465 varasm.o
: varasm.c
$(CONFIG_H
) system.h
$(TREE_H
) $(RTL_H
) flags.h \
1466 function.h defaults.h
$(EXPR_H
) hard-reg-set.h
$(REGS_H
) \
1467 xcoffout.h output.h c-pragma.h toplev.h except.h dbxout.h sdbout.h
1468 function.o
: function.c
$(CONFIG_H
) system.h
$(RTL_H
) $(TREE_H
) flags.h \
1469 function.h insn-flags.h insn-codes.h
$(EXPR_H
) $(REGS_H
) hard-reg-set.h \
1470 insn-config.h
$(RECOG_H
) output.h toplev.h except.h hash.h
1471 stmt.o
: stmt.c
$(CONFIG_H
) system.h
$(RTL_H
) $(TREE_H
) flags.h function.h \
1472 insn-flags.h insn-config.h insn-codes.h hard-reg-set.h
$(EXPR_H
) except.h \
1473 loop.h
$(RECOG_H
) toplev.h output.h varray.h
1474 except.o
: except.c
$(CONFIG_H
) system.h
$(RTL_H
) $(TREE_H
) flags.h \
1475 function.h insn-flags.h
$(EXPR_H
) $(REGS_H
) hard-reg-set.h \
1476 insn-config.h
$(RECOG_H
) output.h except.h toplev.h
1477 expr.o
: expr.c
$(CONFIG_H
) system.h
$(RTL_H
) $(TREE_H
) flags.h function.h \
1478 $(REGS_H
) insn-flags.h insn-codes.h
$(EXPR_H
) insn-config.h
$(RECOG_H
) output.h \
1479 typeclass.h hard-reg-set.h toplev.h hard-reg-set.h except.h
1480 calls.o
: calls.c
$(CONFIG_H
) system.h
$(RTL_H
) $(TREE_H
) flags.h
$(EXPR_H
) \
1481 insn-flags.h
$(REGS_H
) toplev.h output.h
1482 expmed.o
: expmed.c
$(CONFIG_H
) system.h
$(RTL_H
) $(TREE_H
) flags.h \
1483 insn-flags.h insn-config.h insn-codes.h
$(EXPR_H
) $(RECOG_H
) real.h
1484 explow.o
: explow.c
$(CONFIG_H
) system.h
$(RTL_H
) $(TREE_H
) flags.h \
1485 hard-reg-set.h insn-config.h
$(EXPR_H
) $(RECOG_H
) insn-flags.h insn-codes.h
1486 optabs.o
: optabs.c
$(CONFIG_H
) system.h
$(RTL_H
) $(TREE_H
) flags.h \
1487 insn-flags.h insn-config.h insn-codes.h
$(EXPR_H
) $(RECOG_H
) reload.h
1488 dbxout.o
: dbxout.c
$(CONFIG_H
) system.h
$(TREE_H
) $(RTL_H
) flags.h
$(REGS_H
) \
1489 insn-config.h reload.h gstab.h xcoffout.h defaults.h output.h dbxout.h \
1491 sdbout.o
: sdbout.c
$(CONFIG_H
) system.h
$(TREE_H
) $(RTL_H
) flags.h except.h \
1492 function.h
$(EXPR_H
) output.h hard-reg-set.h
$(REGS_H
) defaults.h real.h \
1493 insn-config.h
$(srcdir)/..
/include/obstack.h xcoffout.h c-pragma.h \
1495 dwarfout.o
: dwarfout.c
$(CONFIG_H
) system.h
$(TREE_H
) $(RTL_H
) dwarf.h \
1496 flags.h insn-config.h reload.h output.h defaults.h toplev.h dwarfout.h
1497 dwarf2out.o
: dwarf2out.c
$(CONFIG_H
) system.h
$(TREE_H
) $(RTL_H
) dwarf2.h \
1498 flags.h insn-config.h reload.h output.h defaults.h \
1499 hard-reg-set.h
$(REGS_H
) $(EXPR_H
) toplev.h dwarf2out.h dyn-string.h
1500 xcoffout.o
: xcoffout.c
$(CONFIG_H
) system.h
$(TREE_H
) $(RTL_H
) xcoffout.h \
1501 flags.h toplev.h output.h dbxout.h
1502 emit-rtl.o
: emit-rtl.c
$(CONFIG_H
) system.h
$(RTL_H
) $(TREE_H
) flags.h \
1503 except.h function.h
$(REGS_H
) insn-config.h
$(RECOG_H
) real.h \
1504 $(EXPR_H
) $(srcdir)/..
/include/obstack.h hard-reg-set.h bitmap.h
1505 real.o
: real.c
$(CONFIG_H
) system.h
$(TREE_H
) toplev.h
1506 getpwd.o
: getpwd.c
$(CONFIG_H
) system.h
1508 integrate.o
: integrate.c
$(CONFIG_H
) system.h
$(RTL_H
) $(TREE_H
) flags.h \
1509 integrate.h insn-flags.h insn-config.h
$(EXPR_H
) real.h
$(REGS_H
) \
1510 intl.h function.h output.h
$(RECOG_H
) except.h toplev.h
1512 jump.o
: jump.c
$(CONFIG_H
) system.h
$(RTL_H
) flags.h hard-reg-set.h
$(REGS_H
) \
1513 insn-config.h insn-flags.h
$(RECOG_H
) $(EXPR_H
) real.h except.h \
1514 toplev.h insn-attr.h
1515 stupid.o
: stupid.c
$(CONFIG_H
) system.h
$(RTL_H
) $(REGS_H
) hard-reg-set.h \
1516 $(BASIC_BLOCK_H
) insn-config.h reload.h flags.h toplev.h
1518 cse.o
: cse.c
$(CONFIG_H
) system.h
$(RTL_H
) $(REGS_H
) hard-reg-set.h flags.h \
1519 real.h insn-config.h
$(RECOG_H
) $(EXPR_H
) toplev.h output.h \
1520 $(srcdir)/..
/include/splay-tree.h
1521 gcse.o
: gcse.c
$(CONFIG_H
) system.h
$(RTL_H
) $(REGS_H
) hard-reg-set.h flags.h \
1522 real.h insn-config.h
$(RECOG_H
) $(EXPR_H
) $(BASIC_BLOCK_H
) output.h
1523 resource.o
: resource.c
$(CONFIG_H
) $(RTL_H
) hard-reg-set.h system.h \
1524 $(BASIC_BLOCK_H
) $(REGS_H
) flags.h output.h resource.h
1525 lcm.o
: lcm.c
$(CONFIG_H
) system.h
$(RTL_H
) $(REGS_H
) hard-reg-set.h flags.h \
1526 real.h insn-config.h
$(RECOG_H
) $(EXPR_H
) $(BASIC_BLOCK_H
)
1527 profile.o
: profile.c
$(CONFIG_H
) system.h
$(RTL_H
) flags.h insn-flags.h \
1528 gcov-io.h
$(TREE_H
) output.h
$(REGS_H
) toplev.h insn-config.h
1529 loop.o
: loop.c
$(CONFIG_H
) system.h
$(RTL_H
) flags.h loop.h insn-config.h \
1530 insn-flags.h
$(REGS_H
) hard-reg-set.h
$(RECOG_H
) $(EXPR_H
) real.h \
1532 unroll.o
: unroll.c
$(CONFIG_H
) system.h
$(RTL_H
) insn-config.h \
1533 integrate.h
$(REGS_H
) $(RECOG_H
) flags.h
$(EXPR_H
) loop.h toplev.h varray.h
1534 flow.o
: flow.c
$(CONFIG_H
) system.h
$(RTL_H
) flags.h insn-config.h \
1535 $(BASIC_BLOCK_H
) $(REGS_H
) hard-reg-set.h output.h toplev.h recog.h \
1537 combine.o
: combine.c
$(CONFIG_H
) system.h
$(RTL_H
) flags.h \
1538 insn-config.h insn-flags.h insn-codes.h insn-attr.h
$(REGS_H
) $(EXPR_H
) \
1539 $(BASIC_BLOCK_H
) $(RECOG_H
) real.h hard-reg-set.h toplev.h
1540 regclass.o
: regclass.c
$(CONFIG_H
) system.h
$(RTL_H
) hard-reg-set.h flags.h \
1541 $(BASIC_BLOCK_H
) $(REGS_H
) insn-config.h
$(RECOG_H
) reload.h real.h toplev.h \
1543 local-alloc.o
: local-alloc.c
$(CONFIG_H
) system.h
$(RTL_H
) flags.h \
1544 $(BASIC_BLOCK_H
) $(REGS_H
) hard-reg-set.h insn-config.h
$(RECOG_H
) output.h \
1545 insn-attr.h toplev.h
1546 bitmap.o
: bitmap.c
$(CONFIG_H
) system.h
$(RTL_H
) flags.h
$(BASIC_BLOCK_H
) \
1548 global.o
: global.c
$(CONFIG_H
) system.h
$(RTL_H
) flags.h reload.h \
1549 $(BASIC_BLOCK_H
) $(REGS_H
) hard-reg-set.h insn-config.h output.h toplev.h
1550 varray.o
: varray.c
$(CONFIG_H
) system.h varray.h
$(RTL_H
) $(TREE_H
) bitmap.h
1552 reload.o
: reload.c
$(CONFIG_H
) system.h
$(RTL_H
) flags.h output.h
$(EXPR_H
) \
1553 reload.h
$(RECOG_H
) hard-reg-set.h insn-config.h insn-codes.h
$(REGS_H
) \
1555 reload1.o
: reload1.c
$(CONFIG_H
) system.h
$(RTL_H
) real.h flags.h
$(EXPR_H
) \
1556 reload.h
$(REGS_H
) hard-reg-set.h insn-config.h insn-flags.h insn-codes.h \
1557 $(BASIC_BLOCK_H
) $(RECOG_H
) output.h toplev.h
1558 caller-save.o
: caller-save.c
$(CONFIG_H
) system.h
$(RTL_H
) flags.h \
1559 $(REGS_H
) hard-reg-set.h insn-config.h
$(BASIC_BLOCK_H
) \
1560 $(RECOG_H
) reload.h
$(EXPR_H
) toplev.h
1561 reorg.o
: reorg.c
$(CONFIG_H
) system.h
$(RTL_H
) conditions.h hard-reg-set.h \
1562 $(BASIC_BLOCK_H
) $(REGS_H
) insn-config.h insn-attr.h \
1563 insn-flags.h
$(RECOG_H
) flags.h output.h
$(EXPR_H
)
1564 alias.o
: alias.c
$(CONFIG_H
) system.h
$(RTL_H
) flags.h hard-reg-set.h \
1565 $(REGS_H
) toplev.h output.h
$(EXPR_H
)
1566 regmove.o
: regmove.c
$(CONFIG_H
) system.h
$(RTL_H
) insn-config.h \
1567 $(RECOG_H
) output.h reload.h
$(REGS_H
) hard-reg-set.h flags.h \
1568 $(EXPR_H
) insn-flags.h
$(BASIC_BLOCK_H
) toplev.h
1569 $(SCHED_PREFIX
)sched.o
: $(SCHED_PREFIX
)sched.c
$(CONFIG_H
) system.h
$(RTL_H
) \
1570 $(BASIC_BLOCK_H
) $(REGS_H
) hard-reg-set.h flags.h insn-config.h \
1571 insn-attr.h toplev.h recog.h
1572 final.o
: final.c
$(CONFIG_H
) system.h
$(RTL_H
) $(TREE_H
) flags.h intl.h \
1573 $(REGS_H
) $(RECOG_H
) conditions.h insn-config.h insn-attr.h except.h real.h \
1574 output.h hard-reg-set.h insn-flags.h insn-codes.h gstab.h xcoffout.h \
1575 defaults.h toplev.h reload.h dwarfout.h dwarf2out.h sdbout.h dbxout.h
1576 recog.o
: recog.c
$(CONFIG_H
) system.h
$(RTL_H
) \
1577 $(REGS_H
) $(RECOG_H
) hard-reg-set.h flags.h insn-config.h insn-attr.h \
1578 insn-flags.h insn-codes.h real.h toplev.h
1579 reg-stack.o
: reg-stack.c
$(CONFIG_H
) system.h
$(RTL_H
) $(TREE_H
) recog.h \
1580 $(REGS_H
) hard-reg-set.h flags.h insn-config.h insn-flags.h toplev.h
1581 dyn-string.o
: dyn-string.c dyn-string.h
$(CONFIG_H
) system.h
1583 $(out_object_file
): $(out_file
) $(CONFIG_H
) $(TREE_H
) \
1584 $(RTL_H
) $(REGS_H
) hard-reg-set.h real.h insn-config.h conditions.h \
1585 insn-flags.h output.h insn-attr.h insn-codes.h system.h toplev.h
1586 $(CC
) -c
$(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) $(out_file
)
1588 # Build auxiliary files that support ecoff format.
1589 mips-tfile
: mips-tfile.o version.o
$(LIBDEPS
)
1590 $(CC
) $(CFLAGS
) $(LDFLAGS
) -o
$@ mips-tfile.o version.o
$(LIBS
)
1592 mips-tfile.o
: mips-tfile.c
$(CONFIG_H
) $(RTL_H
) system.h machmode.h
1594 mips-tdump
: mips-tdump.o version.o
$(LIBDEPS
)
1595 $(CC
) $(CFLAGS
) $(LDFLAGS
) -o
$@ mips-tdump.o version.o
$(LIBS
)
1597 mips-tdump.o
: mips-tdump.c
$(CONFIG_H
) $(RTL_H
) system.h
1599 # Build file to support OSF/rose half-pic format.
1600 halfpic.o
: halfpic.c
$(CONFIG_H
) $(RTL_H
) $(TREE_H
) system.h
1602 # Normally this target is not used; but it is used if you
1603 # define ALLOCA=alloca.o. In that case, you must get a suitable alloca.c
1604 # from the GNU Emacs distribution.
1605 alloca.o
: $(srcdir)/..
/libiberty
/alloca.c
1607 $(LN_S
) $(srcdir)/..
/libiberty
/alloca.c alloca.c
1608 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) $(ALLOCA_FLAGS
) \
1609 -c
`echo alloca.c | sed 's,^\./,,'`
1612 # Generate header and source files from the machine description,
1615 .PRECIOUS
: insn-config.h insn-flags.h insn-codes.h \
1616 insn-emit.c insn-recog.c insn-extract.c insn-output.c insn-peep.c \
1617 insn-attr.h insn-attrtab.c
1619 # The following pair of rules has this effect:
1620 # genconfig is run only if the md has changed since genconfig was last run;
1621 # but the file insn-config.h is touched only when its contents actually change.
1623 # Each of the other insn-* files is handled by a similar pair of rules.
1625 # This causes an anomaly in the results of make -n
1626 # because insn-* is older than s-*
1627 # and thus make -n thinks that insn-* will be updated
1628 # and force recompilation of things that depend on it.
1629 # We use move-if-change precisely to avoid such recompilation.
1630 # But there is no way to teach make -n that it will be avoided.
1632 # Each of the insn-*.[ch] rules has a semicolon at the end,
1633 # for otherwise the system Make on SunOS 4.1 never tries
1634 # to recompile insn-*.o. To avoid problems and extra noise from
1635 # versions of make which don't like empty commands (nothing after the
1636 # trailing `;'), we call true for each.
1638 insn-config.h
: s-config
; @true
1639 s-config
: $(md_file
) genconfig
$(srcdir)/move-if-change
1640 .
/genconfig
$(md_file
) > tmp-config.h
1641 $(srcdir)/move-if-change tmp-config.h insn-config.h
1644 insn-flags.h
: s-flags
; @true
1645 s-flags
: $(md_file
) genflags
$(srcdir)/move-if-change
1646 .
/genflags
$(md_file
) > tmp-flags.h
1647 $(srcdir)/move-if-change tmp-flags.h insn-flags.h
1650 insn-codes.h
: s-codes
; @true
1651 s-codes
: $(md_file
) gencodes
$(srcdir)/move-if-change
1652 .
/gencodes
$(md_file
) > tmp-codes.h
1653 $(srcdir)/move-if-change tmp-codes.h insn-codes.h
1656 insn-emit.o
: insn-emit.c
$(CONFIG_H
) $(RTL_H
) $(EXPR_H
) real.h output.h \
1657 insn-config.h insn-flags.h insn-codes.h system.h reload.h recog.h
1658 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) -c insn-emit.c
1660 insn-emit.c
: s-emit
; @true
1661 s-emit
: $(md_file
) genemit
$(srcdir)/move-if-change
1662 .
/genemit
$(md_file
) > tmp-emit.c
1663 $(srcdir)/move-if-change tmp-emit.c insn-emit.c
1666 insn-recog.o
: insn-recog.c
$(CONFIG_H
) $(RTL_H
) insn-config.h
$(RECOG_H
) \
1667 real.h output.h flags.h system.h
1668 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) -c insn-recog.c
1670 insn-recog.c
: s-recog
; @true
1671 s-recog
: $(md_file
) genrecog
$(srcdir)/move-if-change
1672 .
/genrecog
$(md_file
) > tmp-recog.c
1673 $(srcdir)/move-if-change tmp-recog.c insn-recog.c
1676 insn-opinit.o
: insn-opinit.c
$(CONFIG_H
) $(RTL_H
) insn-codes.h insn-flags.h \
1677 insn-config.h flags.h
$(RECOG_H
) $(EXPR_H
) reload.h system.h
1678 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) -c insn-opinit.c
1680 insn-opinit.c
: s-opinit
; @true
1681 s-opinit
: $(md_file
) genopinit
$(srcdir)/move-if-change
1682 .
/genopinit
$(md_file
) > tmp-opinit.c
1683 $(srcdir)/move-if-change tmp-opinit.c insn-opinit.c
1686 insn-extract.o
: insn-extract.c
$(CONFIG_H
) $(RTL_H
) system.h toplev.h \
1687 insn-config.h recog.h
1688 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) -c insn-extract.c
1690 insn-extract.c
: s-extract
; @true
1691 s-extract
: $(md_file
) genextract
$(srcdir)/move-if-change
1692 .
/genextract
$(md_file
) > tmp-extract.c
1693 $(srcdir)/move-if-change tmp-extract.c insn-extract.c
1696 insn-peep.o
: insn-peep.c
$(CONFIG_H
) $(RTL_H
) $(REGS_H
) output.h real.h \
1697 system.h insn-config.h recog.h
1698 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) -c insn-peep.c
1700 insn-peep.c
: s-peep
; @true
1701 s-peep
: $(md_file
) genpeep
$(srcdir)/move-if-change
1702 .
/genpeep
$(md_file
) > tmp-peep.c
1703 $(srcdir)/move-if-change tmp-peep.c insn-peep.c
1706 insn-attrtab.o
: insn-attrtab.c
$(CONFIG_H
) $(RTL_H
) $(REGS_H
) real.h \
1707 output.h insn-attr.h insn-config.h system.h toplev.h
1708 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) -c insn-attrtab.c
1710 insn-attr.h
: s-attr
; @true
1711 s-attr
: $(md_file
) genattr
$(srcdir)/move-if-change
1712 .
/genattr
$(md_file
) > tmp-attr.h
1713 $(srcdir)/move-if-change tmp-attr.h insn-attr.h
1716 insn-attrtab.c
: s-attrtab
; @true
1717 s-attrtab
: $(md_file
) genattrtab
$(srcdir)/move-if-change
1718 if cmp
-s
$(PREMADE_ATTRTAB_MD
) $(md_file
); \
1720 echo Using
$(PREMADE_ATTRTAB
); \
1721 cp
$(PREMADE_ATTRTAB
) tmp-attrtab.c
; \
1723 .
/genattrtab
$(md_file
) > tmp-attrtab.c
; \
1725 $(srcdir)/move-if-change tmp-attrtab.c insn-attrtab.c
1728 insn-output.o
: insn-output.c
$(CONFIG_H
) $(RTL_H
) $(REGS_H
) real.h conditions.h \
1729 hard-reg-set.h insn-config.h insn-flags.h insn-attr.h output.h
$(RECOG_H
) \
1730 insn-codes.h system.h
1731 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) -c insn-output.c
1733 insn-output.c
: s-output
; @true
1734 s-output
: $(md_file
) genoutput
$(srcdir)/move-if-change
1735 .
/genoutput
$(md_file
) > tmp-output.c
1736 $(srcdir)/move-if-change tmp-output.c insn-output.c
1739 genrtl.o
: genrtl.c
$(CONFIG_H
) $(RTL_H
) system.h
1740 genrtl.c genrtl.h
: s-genrtl
1741 @true
# force gnu make to recheck modification times.
1743 s-genrtl
: gengenrtl
$(srcdir)/move-if-change
$(RTL_BASE_H
)
1744 .
/gengenrtl tmp-genrtl.h tmp-genrtl.c
1745 $(srcdir)/move-if-change tmp-genrtl.h genrtl.h
1746 $(srcdir)/move-if-change tmp-genrtl.c genrtl.c
1750 # Compile the programs that generate insn-* from the machine description.
1751 # They are compiled with $(HOST_CC), and associated libraries,
1752 # since they need to run on this machine
1753 # even if GCC is being compiled to run on some other machine.
1755 # $(CONFIG_H) is omitted from the deps of the gen*.o
1756 # because these programs don't really depend on anything
1757 # about the target machine. They do depend on config.h itself,
1758 # since that describes the host machine.
1760 # Pass the md file through cpp if the target requests it.
1761 $(MD_FILE
): $(MD_DEPS
)
1763 $(MD_CPP
) $(MD_CPPFLAGS
) $(md_file
) | sed
's/^# /; /g' > tmp-
$@
1766 genconfig
: genconfig.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_LIBDEPS
)
1767 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1768 genconfig.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_LIBS
)
1770 genconfig.o
: genconfig.c
$(RTL_H
) $(build_xm_file
) system.h
1771 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/genconfig.c
1773 genflags
: genflags.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_LIBDEPS
)
1774 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1775 genflags.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_LIBS
)
1777 genflags.o
: genflags.c
$(RTL_H
) $(build_xm_file
) system.h
1778 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/genflags.c
1780 gencodes
: gencodes.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_LIBDEPS
)
1781 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1782 gencodes.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_LIBS
)
1784 gencodes.o
: gencodes.c
$(RTL_H
) $(build_xm_file
) system.h
1785 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/gencodes.c
1787 genemit
: genemit.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_LIBDEPS
)
1788 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1789 genemit.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_LIBS
)
1791 genemit.o
: genemit.c
$(RTL_H
) $(build_xm_file
) system.h
1792 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/genemit.c
1794 genopinit
: genopinit.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_LIBDEPS
)
1795 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1796 genopinit.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_LIBS
)
1798 genopinit.o
: genopinit.c
$(RTL_H
) $(build_xm_file
) system.h
1799 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/genopinit.c
1801 genrecog
: genrecog.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_LIBDEPS
)
1802 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1803 genrecog.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_LIBS
)
1805 genrecog.o
: genrecog.c
$(RTL_H
) $(build_xm_file
) system.h
1806 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/genrecog.c
1808 genextract
: genextract.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_LIBDEPS
)
1809 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1810 genextract.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_LIBS
)
1812 genextract.o
: genextract.c
$(RTL_H
) $(build_xm_file
) system.h insn-config.h
1813 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/genextract.c
1815 genpeep
: genpeep.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_LIBDEPS
)
1816 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1817 genpeep.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_LIBS
)
1819 genpeep.o
: genpeep.c
$(RTL_H
) $(build_xm_file
) system.h
1820 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/genpeep.c
1822 genattr
: genattr.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_LIBDEPS
)
1823 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1824 genattr.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_LIBS
)
1826 genattr.o
: genattr.c
$(RTL_H
) $(build_xm_file
) system.h
1827 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/genattr.c
1829 genattrtab
: genattrtab.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_RTLANAL
) $(HOST_LIBDEPS
)
1830 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1831 genattrtab.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_RTLANAL
) $(HOST_LIBS
)
1833 genattrtab.o
: genattrtab.c
$(RTL_H
) $(build_xm_file
) system.h insn-config.h
1834 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/genattrtab.c
1836 genoutput
: genoutput.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_LIBDEPS
)
1837 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1838 genoutput.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_LIBS
)
1840 genoutput.o
: genoutput.c
$(RTL_H
) $(build_xm_file
) system.h
1841 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/genoutput.c
1843 gengenrtl
: gengenrtl.o
$(HOST_LIBDEPS
)
1844 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1845 gengenrtl.o
$(HOST_LIBS
)
1847 gengenrtl.o
: gengenrtl.c
$(RTL_BASE_H
) system.h
1848 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/gengenrtl.c
1851 # Compile the libraries to be used by gen*.
1852 # If we are not cross-building, gen* use the same .o's that cc1 will use,
1853 # and HOST_PREFIX_1 is `foobar', just to ensure these rules don't conflict
1854 # with the rules for rtl.o, alloca.o, etc.
1855 $(HOST_PREFIX_1
)rtl.o
: $(srcdir)/rtl.c
$(CONFIG_H
) system.h
$(RTL_H
) bitmap.h
1856 rm -f
$(HOST_PREFIX
)rtl.c
1857 sed
-e
's/config[.]h/hconfig.h/' $(srcdir)/rtl.c
> $(HOST_PREFIX
)rtl.c
1858 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(HOST_PREFIX
)rtl.c
1860 $(HOST_PREFIX_1
)print-rtl.o
: $(srcdir)/print-rtl.c
$(CONFIG_H
) $(RTL_H
) \
1861 bitmap.h basic-block.h
1862 rm -f
$(HOST_PREFIX
)print-rtl.c
1863 sed
-e
's/config[.]h/hconfig.h/' $(srcdir)/print-rtl.c
> $(HOST_PREFIX
)print-rtl.c
1864 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(HOST_PREFIX
)print-rtl.c
1866 $(HOST_PREFIX_1
)bitmap.o
: $(srcdir)/bitmap.c
$(CONFIG_H
) system.h
$(RTL_H
) \
1867 flags.h
$(BASIC_BLOCK_H
) $(REGS_H
)
1868 rm -f
$(HOST_PREFIX
)bitmap.c
1869 sed
-e
's/config[.]h/hconfig.h/' $(srcdir)/bitmap.c
> $(HOST_PREFIX
)bitmap.c
1870 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(HOST_PREFIX
)bitmap.c
1872 $(HOST_PREFIX_1
)rtlanal.o
: $(srcdir)/rtlanal.c
$(CONFIG_H
) $(RTL_H
)
1873 rm -f
$(HOST_PREFIX
)rtlanal.c
1874 sed
-e
's/config[.]h/hconfig.h/' $(srcdir)/rtlanal.c
> $(HOST_PREFIX
)rtlanal.c
1875 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(HOST_PREFIX
)rtlanal.c
1877 $(HOST_PREFIX_1
)alloca.o
: $(srcdir)/..
/libiberty
/alloca.c
1878 rm -f
$(HOST_PREFIX
)alloca.c
1879 $(LN_S
) $(srcdir)/..
/libiberty
/alloca.c
$(HOST_PREFIX
)alloca.c
1880 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(HOST_PREFIX
)alloca.c
1882 $(HOST_PREFIX_1
)obstack.o
: $(srcdir)/..
/libiberty
/obstack.c
1883 rm -f
$(HOST_PREFIX
)obstack.c
1884 sed
-e
's/config[.]h/hconfig.h/' $(srcdir)/..
/libiberty
/obstack.c
> $(HOST_PREFIX
)obstack.c
1885 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(HOST_PREFIX
)obstack.c
1887 $(HOST_PREFIX_1
)vfprintf.o
: $(srcdir)/..
/libiberty
/vfprintf.c
1888 rm -f
$(HOST_PREFIX
)vfprintf.c
1889 sed
-e
's/config[.]h/hconfig.h/' $(srcdir)/..
/libiberty
/vfprintf.c
> $(HOST_PREFIX
)vfprintf.c
1890 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(HOST_PREFIX
)vfprintf.c
1892 $(HOST_PREFIX_1
)doprint.o
: doprint.c
1893 rm -f
$(HOST_PREFIX
)doprint.c
1894 sed
-e
's/config[.]h/hconfig.h/' $(srcdir)/doprint.c
> $(HOST_PREFIX
)doprint.c
1895 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(HOST_PREFIX
)doprint.c
1897 $(HOST_PREFIX_1
)malloc.o
: malloc.c
1898 rm -f
$(HOST_PREFIX
)malloc.c
1899 sed
-e
's/config[.]h/hconfig.h/' $(srcdir)/malloc.c
> $(HOST_PREFIX
)malloc.c
1900 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(HOST_PREFIX
)malloc.c
1902 # This satisfies the dependency that we get if you cross-compile a compiler
1903 # that does not need to compile alloca, malloc or whatever.
1905 touch
$(HOST_PREFIX_1
)
1909 # Remake internationalization support.
1911 intl.o
: intl.c intl.h gansidecl.h Makefile
1912 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) \
1913 -DLOCALEDIR
=\"$(localedir
)\" \
1914 -c
`echo $(srcdir)/intl.c | sed 's,^\./,,'`
1916 # This is needed to when doing a partial build after a `make clean'.
1917 # libintl.a does not depend on intl.all,
1918 # as that would force a lot of recompiling.
1919 $(top_builddir
)/intl
/libintl.a
:
1920 @echo
"$(MAKE) intl.all"
1921 @
$(MAKE
) $(FLAGS_TO_PASS
) intl.
all
1923 # Make sure all the headers are there for xgettext to scan.
1924 $(INTL_TARGETS
): $(srcdir)/c-gperf.h \
1925 $(srcdir)/c-parse.c
$(srcdir)/c-parse.h
$(srcdir)/cexp.c
1927 intl.
all intl.
install intl.
uninstall intl.distdir \
1928 intl.
mostlyclean intl.
clean intl.
distclean intl.maintainer-clean
:
1929 @for d in
$(INTL_SUBDIRS
); do \
1930 target
=`expr $@ : 'intl.\(.*\)'` && \
1931 echo
"(cd $$d && $(MAKE) $$target)" && \
1932 (cd
$$d && AWK
='$(AWK)' $(MAKE
) $(SUBDIR_FLAGS_TO_PASS
) $$target); \
1935 # intl.distdir doesn't copy the intl makefiles (since they aren't distributed),
1936 # but we need them for the `make extraclean' in distdir-finish.
1938 for d in
$(INTL_SUBDIRS
); do \
1939 ln
$$d/Makefile tmp
/$$d || cp
$$d/Makefile tmp
/$$d || exit
; \
1942 # Remake cpp and protoize.
1944 # Making the preprocessor
1945 cpp$(exeext
): $(CCCP
)$(exeext
)
1947 $(LN
) $(CCCP
)$(exeext
) cpp$(exeext
)
1948 CCCP_OBJS
= cccp.o cexp.o intl.o
prefix.o version.o @extra_cpp_objs@ mbchar.o
1949 cccp
$(exeext
): $(CCCP_OBJS
) $(LIBDEPS
)
1950 $(CC
) $(ALL_CFLAGS
) $(LDFLAGS
) -o
$@
$(CCCP_OBJS
) $(LIBS
)
1951 cexp.o
: $(srcdir)/cexp.c
$(CONFIG_H
) system.h
1952 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) -c
$(srcdir)/cexp.c
1953 $(srcdir)/cexp.c
: $(srcdir)/cexp.y
1954 cd
$(srcdir); $(BISON
) -o cexp.c cexp.y
1956 # We use $(libsubdir)/$(unlibsubdir) to match the
1957 # -iprefix argument which gcc will pass if GCC_EXEC_PREFIX is used.
1958 cccp.o
: cccp.c
$(CONFIG_H
) intl.h pcp.h version.c config.status system.h \
1959 mbchar.h
prefix.h Makefile.in
1960 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) \
1961 -DGCC_INCLUDE_DIR
=\"$(libsubdir
)/include\" \
1962 -DGPLUSPLUS_INCLUDE_DIR
=\"$(gcc_gxx_include_dir
)\" \
1963 -DLOCAL_INCLUDE_DIR
=\"$(includedir)\" \
1964 -DCROSS_INCLUDE_DIR
=\"$(gcc_tooldir
)/sys-include
\" \
1965 -DTOOL_INCLUDE_DIR
=\"$(gcc_tooldir
)/include\" \
1966 -c
`echo $(srcdir)/cccp.c | sed 's,^\./,,'`
1968 LIBCPP_OBJS
= cpplib.o cpphash.o cppalloc.o cpperror.o cppexp.o cppfiles.o \
1969 cppinit.o cppulp.o
prefix.o version.o mbchar.o @extra_cpp_objs@
1971 # All the other archives built/used by this makefile are for targets. This
1972 # one is strictly for the host.
1974 libcpp.a
: $(LIBCPP_OBJS
)
1975 $(AR
) $(AR_FLAGS
) libcpp.a
$(LIBCPP_OBJS
)
1976 if
$(RANLIB_TEST
) ; then
$(RANLIB
) libcpp.a
; else true
; fi
1978 cppmain
$(exeext
): cppmain.o intl.o libcpp.a
$(LIBDEPS
)
1979 $(CC
) $(ALL_CFLAGS
) $(LDFLAGS
) -o cppmain
$(exeext
) cppmain.o \
1980 intl.o libcpp.a
$(LIBS
)
1982 cppmain.o
: cppmain.c
$(CONFIG_H
) cpplib.h intl.h system.h
1984 cppulp.o
: cppulp.c
$(CONFIG_H
) system.h output.h
1985 cpplib.o
: cpplib.c
$(CONFIG_H
) cpplib.h intl.h system.h cpphash.h
1986 cpphash.o
: cpphash.c
$(CONFIG_H
) cpplib.h intl.h system.h cpphash.h
1987 cppalloc.o
: cppalloc.c
$(CONFIG_H
) cpplib.h intl.h system.h
1988 cpperror.o
: cpperror.c
$(CONFIG_H
) cpplib.h intl.h system.h
1989 cppexp.o
: cppexp.c
$(CONFIG_H
) cpplib.h intl.h system.h
1990 cppfiles.o
: cppfiles.c
$(CONFIG_H
) cpplib.h intl.h system.h
1992 cppinit.o
: cppalloc.c
$(CONFIG_H
) cpplib.h intl.h system.h \
1993 cpphash.h
prefix.h output.h Makefile
1994 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) \
1995 -DGCC_INCLUDE_DIR
=\"$(libsubdir
)/include\" \
1996 -DGPLUSPLUS_INCLUDE_DIR
=\"$(gcc_gxx_include_dir
)\" \
1997 -DLOCAL_INCLUDE_DIR
=\"$(includedir)\" \
1998 -DCROSS_INCLUDE_DIR
=\"$(gcc_tooldir
)/sys-include
\" \
1999 -DTOOL_INCLUDE_DIR
=\"$(gcc_tooldir
)/include\" \
2000 -c
`echo $(srcdir)/cppinit.c | sed 's,^\./,,'`
2002 # Note for the stamp targets, we run the program `true' instead of
2003 # having an empty command (nothing following the semicolon).
2005 proto
: config.status protoize
$(exeext
) unprotoize
$(exeext
) SYSCALLS.c.X
2007 PROTO_OBJS
= getpwd.o intl.o version.o
2009 protoize
$(exeext
): protoize.o
$(PROTO_OBJS
) $(LIBDEPS
)
2010 $(CC
) $(ALL_CFLAGS
) $(LDFLAGS
) -o
$@ protoize.o
$(PROTO_OBJS
) $(LIBS
)
2012 unprotoize
$(exeext
): unprotoize.o
$(PROTO_OBJS
) $(LIBDEPS
)
2013 $(CC
) $(ALL_CFLAGS
) $(LDFLAGS
) -o
$@ unprotoize.o
$(PROTO_OBJS
) $(LIBS
)
2015 protoize.o
: protoize.c
$(srcdir)/..
/include/getopt.h
$(CONFIG_H
) system.h \
2017 $(CC
) -c
$(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) \
2018 -DGCC_INCLUDE_DIR
=\"$(libsubdir
)/include\" \
2019 -DGPLUSPLUS_INCLUDE_DIR
=\"$(gcc_gxx_include_dir
)\" \
2020 -DCROSS_INCLUDE_DIR
=\"$(gcc_tooldir
)/sys-include
\" \
2021 -DTOOL_INCLUDE_DIR
=\"$(gcc_tooldir
)/include\" \
2022 -DLOCAL_INCLUDE_DIR
=\"$(includedir)\" \
2023 -DSTD_PROTO_DIR
=\"$(libsubdir
)\" \
2024 $(srcdir)/protoize.c
2026 unprotoize.o
: unprotoize.c protoize.c
$(srcdir)/..
/include/getopt.h \
2027 $(CONFIG_H
) system.h Makefile
2028 $(CC
) -c
$(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) \
2029 -DGCC_INCLUDE_DIR
=\"$(libsubdir
)/include\" \
2030 -DGPLUSPLUS_INCLUDE_DIR
=\"$(gcc_gxx_include_dir
)\" \
2031 -DCROSS_INCLUDE_DIR
=\"$(gcc_tooldir
)/sys-include
\" \
2032 -DTOOL_INCLUDE_DIR
=\"$(gcc_tooldir
)/include\" \
2033 -DLOCAL_INCLUDE_DIR
=\"$(includedir)\" \
2034 -DSTD_PROTO_DIR
=\"$(libsubdir
)\" \
2035 $(srcdir)/unprotoize.c
2037 # This info describes the target machine, so compile with GCC just built.
2038 SYSCALLS.c.X
: $(srcdir)/sys-types.h
$(srcdir)/sys-protos.h
$(GCC_PASSES
) \
2040 -rm -f SYSCALLS.c tmp-SYSCALLS.s
2041 cat
$(srcdir)/sys-types.h
$(srcdir)/sys-protos.h
> SYSCALLS.c
2042 $(GCC_FOR_TARGET
) $(GCC_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) \
2043 -aux-info
$@
-S
-o tmp-SYSCALLS.s SYSCALLS.c
2044 -rm -f SYSCALLS.c tmp-SYSCALLS.s
2047 test-protoize-simple
: .
/protoize .
/unprotoize
$(GCC_PASSES
)
2048 -rm -f tmp-proto.
[cso
]
2049 cp
$(srcdir)/protoize.c tmp-proto.c
2050 chmod u
+w tmp-proto.c
2051 .
/protoize
-N
-B .
/ -x getopt.h
-c
"-B./ -Wall -Wwrite-strings \
2052 $(CFLAGS) $(INCLUDES) \
2053 -DGCC_INCLUDE_DIR=0 \
2054 -DGPLUSPLUS_INCLUDE_DIR=0 \
2055 -DCROSS_INCLUDE_DIR=0 \
2056 -DTOOL_INCLUDE_DIR=0 \
2057 -DSTD_PROTO_DIR=0" tmp-proto.c
2058 @echo
'**********' Expect
400 lines of differences.
2059 -diff
$(srcdir)/protoize.c tmp-proto.c
> tmp-proto.diff
2060 -wc
-l tmp-proto.diff
2061 .
/unprotoize
-N
-x getopt.h
-c
"-B./ -Wall -Wwrite-strings \
2062 $(CFLAGS) $(INCLUDES) \
2063 -DGCC_INCLUDE_DIR=0 \
2064 -DGPLUSPLUS_INCLUDE_DIR=0 \
2065 -DCROSS_INCLUDE_DIR=0 \
2066 -DTOOL_INCLUDE_DIR=0 \
2067 -DSTD_PROTO_DIR=0" tmp-proto.c
2068 @echo Expect zero differences.
2069 diff
$(srcdir)/protoize.c tmp-proto.c | cat
2070 -rm -f tmp-proto.
[cs
] tmp-proto
$(objext
)
2072 gcov.o
: gcov.c gcov-io.h intl.h system.h
2074 # Only one of 'gcov' or 'gcov.exe' is actually built, depending
2075 # upon whether $(exeext) is empty or not.
2076 GCOV_OBJS
= gcov.o intl.o
2077 gcov
$(exeext
): $(GCOV_OBJS
) $(LIBDEPS
)
2078 $(CC
) $(ALL_CFLAGS
) $(LDFLAGS
) $(GCOV_OBJS
) $(LIBS
) -o
$@
2080 # Build the include directory. The stamp files are stmp-* rather than
2081 # s-* so that mostlyclean does not force the include directory to
2084 # Build the include directory including float.h (which no longer depends upon
2086 stmp-int-hdrs
: stmp-fixinc
$(USER_H
) xlimits.h
2087 # Copy in the headers provided with gcc.
2088 # The sed command gets just the last file name component;
2089 # this is necessary because VPATH could add a dirname.
2090 # Using basename would be simpler, but some systems don't have it.
2091 # The touch command is here to workaround an AIX/Linux NFS bug.
2092 for file in ..
$(USER_H
); do \
2093 if
[ X
$$file != X..
]; then \
2094 realfile
=`echo $$file | sed -e 's|.*/\([^/]*\)$$|\1|'`; \
2095 touch
include/$$realfile; \
2096 rm -f
include/$$realfile; \
2097 cp
$$file include; \
2098 chmod a
+r
include/$$realfile; \
2101 rm -f
include/limits.h
2102 cp xlimits.h
include/limits.h
2103 chmod a
+r
include/limits.h
2104 rm -f
include/float.h
2105 if
[ x
$(FLOAT_H
) != xMakefile.in
]; then \
2106 cp
$(srcdir)/config
/$(FLOAT_H
) include/float.h
&& \
2107 chmod a
+r
include/float.h
; \
2109 # Install the README
2110 rm -f
include/README
2111 cp
$(srcdir)/README-fixinc
include/README
2112 chmod a
+r
include/README
2115 # Now that float.h no longer depends upon enquire, this is actually a no-op.
2119 fixinc.sh
: $(srcdir)/fixinc
/mkfixinc.sh
2120 MAKE
="$(MAKE)"; srcdir=`cd $(srcdir)/fixinc; pwd` ; \
2121 export MAKE
srcdir ; \
2122 cd .
/fixinc
; $(SHELL
) $${srcdir}/mkfixinc.sh
$(target
)
2124 ##stmp-fixinc: $(FIXINCLUDES) gsyslimits.h
2127 ## if [ x$(FIXINCLUDES) != xMakefile.in ]; \
2129 ## for dir in $(SYSTEM_HEADER_DIR) $(OTHER_FIXINCLUDES_DIRS); do \
2130 ## if [ -d $$dir ]; \
2132 ## $(SHELL) $(srcdir)/$(FIXINCLUDES) include $$dir; \
2135 ## if [ x$(INSTALL_ASSERT_H) != x ] ; \
2137 ## rm -f include/assert.h; \
2138 ## cp $(srcdir)/assert.h include/assert.h; \
2139 ## chmod a+r include/assert.h; \
2144 # Build fixed copies of system files.
2145 stmp-fixinc
: fixinc.sh gsyslimits.h
2146 rm -rf
include; mkdir
include
2147 TARGET_MACHINE
=$(target
); srcdir=`cd $(srcdir); pwd`; \
2148 INSTALL_ASSERT_H
=$(INSTALL_ASSERT_H
); \
2149 export TARGET_MACHINE
srcdir INSTALL_ASSERT_H
; \
2150 $(SHELL
) .
/fixinc.sh
`pwd`/include $(SYSTEM_HEADER_DIR
) $(OTHER_FIXINCLUDES_DIRS
)
2151 rm -f
include/syslimits.h
2152 if
[ -f
include/limits.h
]; then \
2153 mv
include/limits.h
include/syslimits.h
; \
2155 cp
$(srcdir)/gsyslimits.h
include/syslimits.h
; \
2157 chmod a
+r
include/syslimits.h
2158 # If $(SYSTEM_HEADER_DIR) is $(tooldir)/sys-include, and
2159 # that directory exists, then make sure that $(libsubdir) exists.
2160 # This is because cpp is compiled to find $(tooldir)/include via
2161 # $(libsubdir)/$(unlibsubdir), which will only work if $(libsubdir)
2163 # We deliberately use tooldir instead of gcc_tooldir here. gcc_tooldir
2164 # won't work because libsubdir doesn't exist yet.
2165 if
[ "$(SYSTEM_HEADER_DIR)" = "$(tooldir)/sys-include" ] \
2166 && [ -d
$(tooldir
)/sys-include
]; then \
2167 if
[ -d
$(libdir) ] ; then true
; else mkdir
$(libdir) ; fi
; \
2168 if
[ -d
$(libdir)/gcc-lib
] ; then true
; else mkdir
$(libdir)/gcc-lib
; fi
; \
2169 if
[ -d
$(libdir)/gcc-lib
/$(target_alias
) ] ; then true
; else mkdir
$(libdir)/gcc-lib
/$(target_alias
) ; fi
; \
2170 if
[ -d
$(libdir)/gcc-lib
/$(target_alias
)/$(version
) ] ; then true
; else mkdir
$(libdir)/gcc-lib
/$(target_alias
)/$(version
) ; fi
; \
2175 # Files related to the fixproto script.
2177 deduced.h
: $(GCC_PASSES
) $(srcdir)/scan-types.sh stmp-int-hdrs
2178 if
[ -d
$(SYSTEM_HEADER_DIR
) ]; \
2180 CC
="$(GCC_FOR_TARGET) $(GCC_CFLAGS) $(ALL_CPPFLAGS) -I. -I$(srcdir) -Iinclude -I${SYSTEM_HEADER_DIR}"; \
2182 $(SHELL
) $(srcdir)/scan-types.sh
"$(srcdir)" >tmp-deduced.h
; \
2183 mv tmp-deduced.h deduced.h
; \
2188 GEN_PROTOS_OBJS
= gen-protos.o scan.o libcpp.a
2189 gen-protos
: $(GEN_PROTOS_OBJS
) $(HOST_LIBDEPS
)
2190 ${HOST_CC} $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o gen-protos \
2191 $(GEN_PROTOS_OBJS
) $(HOST_LIBS
)
2193 gen-protos.o
: gen-protos.c scan.h
$(build_xm_file
) system.h
2194 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/gen-protos.c
2196 scan.o
: scan.c scan.h
$(build_xm_file
) system.h
2197 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/scan.c
2199 xsys-protos.h
: $(GCC_PASSES
) $(srcdir)/sys-protos.h deduced.h gen-protos Makefile
2200 cat deduced.h
$(srcdir)/sys-protos.h
> tmp-fixtmp.c
2201 mv tmp-fixtmp.c fixtmp.c
2202 $(GCC_FOR_TARGET
) fixtmp.c
-w
-U__SIZE_TYPE__
-U__PTRDIFF_TYPE__
-U__WCHAR_TYPE__
-E \
2203 | sed
-e
's/ / /g' -e
's/ *(/ (/g' -e
's/ [ ]*/ /g' -e
's/( )/()/' \
2204 | .
/gen-protos
>xsys-protos.hT
2205 mv xsys-protos.hT xsys-protos.h
2208 fix-header
: fix-header.o scan-decls.o scan.o xsys-protos.h
$(HOST_LIBDEPS
) \
2210 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ fix-header.o \
2211 scan-decls.o scan.o libcpp.a
$(HOST_LIBS
)
2213 fix-header.o
: fix-header.c
$(srcdir)/..
/include/obstack.h scan.h \
2214 xsys-protos.h
$(build_xm_file
) system.h cpplib.h cpphash.h
2215 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/fix-header.c
2217 scan-decls.o
: scan-decls.c scan.h cpplib.h
$(build_xm_file
) system.h
2218 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/scan-decls.c
2220 # stmp-fixproto depends on this, not on fix-header directly.
2221 # The idea is to make sure fix-header gets built,
2222 # but not rerun fixproto after each stage
2223 # just because fix-header's mtime has changed.
2224 fixhdr.ready
: fix-header
2225 -if
[ -f fixhdr.ready
] ; then \
2228 touch fixhdr.ready
; \
2231 # stmp-headers is to make sure fixincludes has already finished.
2232 # The if statement is so that we don't run fixproto a second time
2233 # if it has already been run on the files in `include'.
2234 stmp-fixproto
: fixhdr.ready fixproto stmp-headers
2235 @echo
"Various warnings and error messages from fixproto are normal"
2236 -if
[ -d
include ] ; then true
; else mkdir
include; fi
2237 -if
[ -f
include/fixed
] ; then true
; \
2239 : This line works around a
'make' bug in BSDI
1.1.
; \
2240 FIXPROTO_DEFINES
="$(FIXPROTO_DEFINES)"; export FIXPROTO_DEFINES
; \
2241 if
[ -d
$(SYSTEM_HEADER_DIR
) ] ; then \
2242 $(SHELL
) ${srcdir}/fixproto
include include $(SYSTEM_HEADER_DIR
); \
2244 touch
include/fixed
; \
2248 # Remake the info files.
2251 info: cpp.
info gcc.
info lang.
info
2253 cpp.
info: $(srcdir)/cpp.texi
2254 $(MAKEINFO
) $(MAKEINFOFLAGS
) -I
$(srcdir) -o
cpp.
info $(srcdir)/cpp.texi
2256 gcc.
info: $(srcdir)/gcc.texi
$(srcdir)/extend.texi
$(srcdir)/install.texi \
2257 $(srcdir)/invoke.texi
$(srcdir)/md.texi
$(srcdir)/rtl.texi \
2258 $(srcdir)/tm.texi
$(srcdir)/gcov.texi
2259 $(MAKEINFO
) $(MAKEINFOFLAGS
) -I
$(srcdir) -o gcc.
info $(srcdir)/gcc.texi
2261 dvi: gcc.
dvi cpp.
dvi lang.
dvi
2263 # This works with GNU Make's default rule.
2264 gcc.
dvi: $(srcdir)/gcc.texi
$(srcdir)/extend.texi
$(srcdir)/install.texi \
2265 $(srcdir)/invoke.texi
$(srcdir)/md.texi
$(srcdir)/rtl.texi \
2266 $(srcdir)/tm.texi
$(srcdir)/gcov.texi
2267 TEXINPUTS
=${texidir}:$(srcdir):$$TEXINPUTS tex gcc.texi
2269 TEXINPUTS
=${texidir}:$(srcdir):$$TEXINPUTS tex gcc.texi
2271 cpp.
dvi: $(srcdir)/cpp.texi
2272 TEXINPUTS
=${texidir}:$(srcdir):$$TEXINPUTS tex cpp.texi
2274 TEXINPUTS
=${texidir}:$(srcdir):$$TEXINPUTS tex cpp.texi
2277 INSTALL
: $(srcdir)/install1.texi
$(srcdir)/install.texi
2278 cd
$(srcdir); $(MAKEINFO
) -D INSTALLONLY \
2279 --no-split
-o INSTALL install1.texi
2281 # Deletion of files made during compilation.
2282 # There are four levels of this:
2283 # `mostlyclean', `clean', `distclean' and `maintainer-clean'.
2284 # `mostlyclean' is useful while working on a particular type of machine.
2285 # It deletes most, but not all, of the files made by compilation.
2286 # It does not delete libgcc.a or its parts, so it won't have to be recompiled.
2287 # `clean' deletes everything made by running `make all'.
2288 # `distclean' also deletes the files made by config.
2289 # `maintainer-clean' also deletes everything that could be regenerated
2290 # automatically, except for `configure'.
2291 # We remove as much from the language subdirectories as we can
2292 # (less duplicated code).
2295 mostlyclean: intl.
mostlyclean lang.
mostlyclean
2296 -rm -f
$(STAGESTUFF
)
2297 # Delete the temporary source copies for cross compilation.
2298 -rm -f
$(HOST_PREFIX_1
)rtl.c
$(HOST_PREFIX_1
)rtlanal.c
2299 -rm -f
$(HOST_PREFIX_1
)alloca.c
$(HOST_PREFIX_1
)malloc.c
2300 -rm -f
$(HOST_PREFIX_1
)obstack.c
2301 # Delete the temp files made in the course of building libgcc.a.
2302 -rm -f tmplibgcc
* tmpcopy xlimits.h libgcc1-test
2303 for name in
$(LIB1FUNCS
); do
rm -f
$${name}.c
; done
2304 # Delete other built files.
2305 -rm -f t-float.h-cross xsys-protos.hT fp-bit.c dp-bit.c
2306 # Delete the stamp and temporary files.
2307 -rm -f s-
* tmp-
* stamp-
* stmp-
*
2308 -rm -f
*/stamp-
* */tmp-
*
2309 # Delete debugging dump files.
2310 -rm -f
*.greg
*.lreg
*.combine
*.flow
*.cse
*.jump
*.rtl
*.tree
*.loop
2311 -rm -f
*.dbr
*.jump2
*.sched
*.cse2
*.sched2
*.stack
*.addressof
2312 -rm -f
*.regmove
*.mach
*.bp
*.gcse
*.flow2
2313 -rm -f
*/*.greg
*/*.lreg
*/*.combine
*/*.flow
*/*.cse
*/*.jump
*/*.rtl
2314 -rm -f
*/*.tree
*/*.loop
*/*.dbr
*/*.jump2
*/*.sched
*/*.cse2
2315 -rm -f
*/*.sched2
*/*.stack
*/*.regmove
*/*.gcse
*/*.flow2
2316 # Delete some files made during installation.
2317 -rm -f specs float.h-
* enquire SYSCALLS.c.X SYSCALLS.c
2318 -rm -f collect collect2 mips-tfile mips-tdump alloca.s
2319 # Delete files generated for fixproto
2320 -rm -rf fix-header xsys-protos.h deduced.h tmp-deduced.h \
2321 gen-protos fixproto.list fixtmp.
* fixhdr.ready
2322 # Delete unwanted output files from TeX.
2323 -rm -f
*.toc
*.log
*.vr
*.fn
*.cp
*.tp
*.ky
*.pg
2324 -rm -f
*/*.toc
*/*.log
*/*.vr
*/*.fn
*/*.cp
*/*.tp
*/*.ky
*/*.pg
2325 # Delete sorted indices we don't actually use.
2326 -rm -f gcc.vrs gcc.kys gcc.tps gcc.pgs gcc.fns
2327 # Delete core dumps.
2331 # Delete all files made by compilation
2332 # that don't exist in the distribution.
2333 clean: mostlyclean intl.
clean lang.
clean
2334 # It may not be quite desirable to delete unprotoize.c here,
2335 # but the spec for `make clean' requires it.
2336 # Using unprotoize.c is not quite right in the first place,
2337 # but what better way is there?
2338 -rm -f libgcc.a libgcc1.a libgcc1-asm.a libgcc2.a libgcc2.ready
2342 -if
[ -f md.pre-cpp
]; then \
2345 # Delete the include directory.
2347 # Delete files used by the "multilib" facility (including libgcc subdirs).
2348 -rm -f multilib.h tmpmultilib
*
2349 -if
[ "x$(MULTILIB_DIRNAMES)" != x
] ; then \
2350 rm -rf
$(MULTILIB_DIRNAMES
); \
2351 else if
[ "x$(MULTILIB_OPTIONS)" != x
] ; then \
2352 rm -rf
`echo $(MULTILIB_OPTIONS) | sed -e 's/\// /g'`; \
2354 -rm -fr stage1 stage2 stage3 stage4
2356 # Delete all files that users would normally create
2357 # while building and installing GCC.
2358 INTL_DISTCLEAN
= intl.
distclean
2359 distclean: clean $(INTL_DISTCLEAN
) lang.
distclean
2360 -rm -f tm.h config.h auto-host.h auto-build.h tconfig.h hconfig.h
2362 -rm -f config.status config.run config.cache config.bak
2363 -rm -f Make-lang Make-hooks Make-host Make-target
2364 -rm -f Makefile specs.h options.h gencheck.h
*.oaux
2365 -rm -f gthr-default.h
2366 -rm -f
*/stage1
*/stage2
*/stage3
*/stage4
*/include
2367 -rm -f c-parse.output
2370 -rm -f site.exp site.bak testsuite
/site.exp testsuite
/site.bak
2371 -rm -f testsuite
/{gcc
,g
++}.
{log
,sum
}
2372 -rm -f intl
/libintl.h libintl.h
2374 # Delete anything likely to be found in the source directory
2375 # that shouldn't be in the distribution.
2376 extraclean
: distclean lang.extraclean
2377 -rm -rf
=* .
/"#"* *~
* config
/=* config
/"#"* config
/*~
*
2378 -rm -f patch
* *.orig
*.rej config
/patch
* config
/*.orig config
/*.rej
2379 -rm -f config
/*/=* config
/*/"#"* config
/*/*~
*
2380 -rm -f config
/*/*.orig config
/*/*.rej
2381 -rm -f
*.
dvi *.ps
*.oaux
*.d
*.
[zZ
] *.gz
2382 -rm -f
*.
tar *.xtar
*diff
*.diff.
* *.
tar.
* *.xtar.
* *diffs
2383 -rm -f
*lose config
/*lose config
/*/*lose
2384 -rm -f
*.s
*.s
[0-9] *.i config
/ChangeLog
2385 -rm -f y.tab.c
yacc.
*
2386 -rm -f
*/=* */"#"* */*~
*
2387 -rm -f
*/patch
* */*.orig
*/*.rej
2388 -rm -f
*/*.
dvi */*.oaux
*/*.d
*/*.
[zZ
] */*.gz
2389 -rm -f
*/*.
tar */*.xtar
*/*diff
*/*.diff.
* */*.
tar.
* */*.xtar.
* */*diffs
2390 -rm -f
*/*lose
*/*.s
*/*.s
[0-9] */*.i
2392 # Get rid of every file that's generated from some other file, except for `configure'.
2393 # Most of these files ARE PRESENT in the GCC distribution.
2394 # We define INTL_DISTCLEAN to be empty in the submake, so that
2395 # we don't descend into intl after its makefile has been removed.
2397 @echo
'This command is intended for maintainers to use; it'
2398 @echo
'deletes files that may need special tools to rebuild.'
2399 $(MAKE
) INTL_DISTCLEAN
= distclean \
2400 intl.maintainer-clean lang.maintainer-clean
2401 -rm -f c-parse.y c-gperf.h
2402 -rm -f c-parse.c c-parse.h c-parse.output
2403 -rm -f cexp.c cexp.output TAGS
2404 -rm -f
cpp.
info* cpp.??s
cpp.
*aux
2405 -rm -f gcc.
info* gcc.??s gcc.
*aux
2407 # Entry points `install' and `uninstall'.
2408 # Also use `install-collect2' to install collect2 when the config files don't.
2410 # The semicolon is to prevent the install.sh -> install default rule
2411 # from doing anything. Having it run true helps avoid problems and
2412 # noise from versions of make which don't like to have null commands.
2413 install: $(INSTALL_TARGET
) ; @true
2415 # Copy the compiler files into directories where they will be run.
2416 # Install the driver last so that the window when things are
2418 install-normal
: install-common
$(INSTALL_HEADERS
) $(INSTALL_LIBGCC
) \
2419 $(INSTALL_CPP
) install-man install-info intl.
install lang.install-normal \
2422 # Do nothing while making gcc with a cross-compiler. The person who
2423 # makes gcc for the target machine has to know how to put a complete
2424 # gcc together by hand.
2425 install-build
: force
2426 @echo You have to
install gcc on your target machine by hand.
2428 # Run this on the target machine
2429 # to finish installation of cross compiler.
2430 # This is not used anymore now that float.h does not depend on enquire.
2431 install-cross-rest
: install-float-h-cross
2433 # Handle cpp installation.
2434 install-cpp
: xcpp
$(exeext
)
2435 -rm -f
$(bindir)/$(CPP_INSTALL_NAME
)$(exeext
)
2436 $(INSTALL_PROGRAM
) -m
755 xcpp
$(exeext
) $(bindir)/$(CPP_INSTALL_NAME
)$(exeext
)
2437 if
[ x
$(cpp_install_dir
) != x
]; then \
2438 rm -f
$(prefix)/$(cpp_install_dir
)/$(CPP_INSTALL_NAME
)$(exeext
); \
2439 $(INSTALL_PROGRAM
) -m
755 xcpp
$(exeext
) $(prefix)/$(cpp_install_dir
)/$(CPP_INSTALL_NAME
)$(exeext
); \
2443 -rm -f
$(bindir)/cpp
2444 -if
[ x
$(cpp_install_dir
) != x
]; then \
2445 rm -f
$(prefix)/$(cpp_install_dir
)/cpp; \
2448 # Install float.h for cross compiler.
2449 # Run this on the target machine!
2450 # This is not used anymore now that float.h does not depend on enquire.
2451 install-float-h-cross
: installdirs
2452 # if [ -f enquire ] ; then true; else false; fi
2453 # Note: don't use -. We should fail right away if enquire was not made.
2454 .
/enquire
-f
> $(tmpdir
)/float.h
2455 -rm -f
$(libsubdir
)/include/float.h
2456 $(INSTALL_DATA
) $(tmpdir
)/float.h
$(libsubdir
)/include/float.h
2457 -rm -f
$(tmpdir
)/float.h
2458 chmod a-x
$(libsubdir
)/include/float.h
2460 # Create the installation directories.
2462 -if
[ -d
$(prefix) ] ; then true
; else mkdir
$(prefix) ; chmod a
+rx
$(prefix) ; fi
2463 -if
[ -d
$(exec_prefix) ] ; then true
; else mkdir
$(exec_prefix) ; chmod a
+rx
$(exec_prefix) ; fi
2464 -if
[ -d
$(libdir) ] ; then true
; else mkdir
$(libdir) ; chmod a
+rx
$(libdir) ; fi
2465 -if
[ -d
$(libdir)/gcc-lib
] ; then true
; else mkdir
$(libdir)/gcc-lib
; chmod a
+rx
$(libdir)/gcc-lib
; fi
2466 # This dir isn't currently searched by cpp.
2467 # -if [ -d $(libdir)/gcc-lib/include ] ; then true ; else mkdir $(libdir)/gcc-lib/include ; chmod a+rx $(libdir)/gcc-lib/include ; fi
2468 -fdir
= ; for
dir in
`echo $(libsubdir) | tr '/' ' '`; do \
2469 fdir
=$${fdir}/$${dir}; \
2470 if
[ -d
$${fdir} ] ; then true
; else mkdir
$${fdir}; chmod a
+rx
$${fdir}; fi
; \
2472 -if
[ -d
$(bindir) ] ; then true
; else mkdir
$(bindir) ; chmod a
+rx
$(bindir) ; fi
2473 -if
[ -d
$(includedir) ] ; then true
; else mkdir
$(includedir) ; chmod a
+rx
$(includedir) ; fi
2474 -if
[ -d
$(gcc_tooldir
) ] ; then true
; else mkdir
$(gcc_tooldir
) ; chmod a
+rx
$(gcc_tooldir
) ; fi
2475 -if
[ -d
$(assertdir
) ] ; then true
; else mkdir
$(assertdir
) ; chmod a
+rx
$(assertdir
) ; fi
2476 -if
[ -d
$(infodir) ] ; then true
; else mkdir
$(infodir) ; chmod a
+rx
$(infodir) ; fi
2477 # We don't use mkdir -p to create the parents of man1dir,
2478 # because some systems don't support it.
2479 # Instead, we use this technique to create the immediate parent of man1dir.
2480 -parent
=`echo $(man1dir)|sed -e 's@/[^/]*$$@@'`; \
2481 if
[ -d
$$parent ] ; then true
; else mkdir
$$parent ; chmod a
+rx
$$parent ; fi
2482 -if
[ -d
$(man1dir) ] ; then true
; else mkdir
$(man1dir) ; chmod a
+rx
$(man1dir) ; fi
2484 # Install the compiler executables built during cross compilation.
2485 install-common
: native
installdirs $(EXTRA_PARTS
) lang.install-common
2486 for file in
$(COMPILERS
); do \
2487 if
[ -f
$$file ] ; then \
2488 rm -f
$(libsubdir
)/$$file; \
2489 $(INSTALL_PROGRAM
) $$file $(libsubdir
)/$$file; \
2493 for file in
$(EXTRA_PASSES
) $(EXTRA_PROGRAMS
) $(USE_COLLECT2
) ..
; do \
2494 if
[ x
"$$file" != x..
]; then \
2495 rm -f
$(libsubdir
)/$$file; \
2496 $(INSTALL_PROGRAM
) $$file $(libsubdir
)/$$file; \
2499 for file in
$(EXTRA_PARTS
) ..
; do \
2500 if
[ x
"$$file" != x..
]; then \
2501 rm -f
$(libsubdir
)/$$file; \
2502 $(INSTALL_DATA
) $$file $(libsubdir
)/$$file; \
2503 chmod a-x
$(libsubdir
)/$$file; \
2506 # Don't mess with specs if it doesn't exist yet.
2507 -if
[ -f specs
] ; then \
2508 rm -f
$(libsubdir
)/specs
; \
2509 $(INSTALL_DATA
) specs
$(libsubdir
)/specs
; \
2510 chmod a-x
$(libsubdir
)/specs
; \
2512 # Install protoize if it was compiled.
2513 -if
[ -f protoize
$(exeext
) ]; \
2515 if
[ -f gcc-cross
$(exeext
) ] ; then \
2516 rm -f
$(bindir)/$(PROTOIZE_CROSS_NAME
)$(exeext
); \
2517 $(INSTALL_PROGRAM
) protoize
$(exeext
) $(bindir)/$(PROTOIZE_CROSS_NAME
)$(exeext
); \
2518 rm -f
$(bindir)/$(UNPROTOIZE_CROSS_NAME
)$(exeext
); \
2519 $(INSTALL_PROGRAM
) unprotoize
$(exeext
) $(bindir)/$(UNPROTOIZE_CROSS_NAME
)$(exeext
); \
2521 rm -f
$(bindir)/$(PROTOIZE_INSTALL_NAME
)$(exeext
); \
2522 $(INSTALL_PROGRAM
) protoize
$(exeext
) $(bindir)/$(PROTOIZE_INSTALL_NAME
)$(exeext
); \
2523 rm -f
$(bindir)/$(UNPROTOIZE_INSTALL_NAME
)$(exeext
); \
2524 $(INSTALL_PROGRAM
) unprotoize
$(exeext
) $(bindir)/$(UNPROTOIZE_INSTALL_NAME
)$(exeext
); \
2526 rm -f
$(libsubdir
)/SYSCALLS.c.X
; \
2527 $(INSTALL_DATA
) SYSCALLS.c.X
$(libsubdir
)/SYSCALLS.c.X
; \
2528 chmod a-x
$(libsubdir
)/SYSCALLS.c.X
; \
2530 -rm -f
$(libsubdir
)/cpp$(exeext
)
2531 $(INSTALL_PROGRAM
) cpp$(exeext
) $(libsubdir
)/cpp$(exeext
)
2532 # Install gcov if it was compiled.
2533 -if
[ -f gcov
$(exeext
) ]; \
2535 rm -f
$(bindir)/gcov
$(exeext
); \
2536 $(INSTALL_PROGRAM
) gcov
$(exeext
) $(bindir)/$(GCOV_INSTALL_NAME
)$(exeext
); \
2539 # Install the driver program as $(target_alias)-gcc
2540 # and also as either gcc (if native) or $(gcc_tooldir)/bin/gcc.
2541 install-driver
: xgcc
$(exeext
)
2542 -if
[ -f gcc-cross
$(exeext
) ] ; then \
2543 rm -f
$(bindir)/$(GCC_CROSS_NAME
)$(exeext
); \
2544 $(INSTALL_PROGRAM
) gcc-cross
$(exeext
) $(bindir)/$(GCC_CROSS_NAME
)$(exeext
); \
2545 if
[ -d
$(gcc_tooldir
)/bin
/.
] ; then \
2546 rm -f
$(gcc_tooldir
)/bin
/gcc
$(exeext
); \
2547 $(INSTALL_PROGRAM
) gcc-cross
$(exeext
) $(gcc_tooldir
)/bin
/gcc
$(exeext
); \
2550 rm -f
$(bindir)/$(GCC_INSTALL_NAME
)$(exeext
); \
2551 $(INSTALL_PROGRAM
) xgcc
$(exeext
) $(bindir)/$(GCC_INSTALL_NAME
)$(exeext
); \
2552 rm -f
$(bindir)/$(target_alias
)-gcc-1
$(exeext
); \
2553 $(LN
) $(bindir)/$(GCC_INSTALL_NAME
)$(exeext
) $(bindir)/$(target_alias
)-gcc-1
$(exeext
); \
2554 mv
$(bindir)/$(target_alias
)-gcc-1
$(exeext
) $(bindir)/$(target_alias
)-gcc
$(exeext
); \
2557 # Install the info files.
2558 # $(INSTALL_DATA) might be a relative pathname, so we can't cd into srcdir
2559 # to do the install.
2560 install-info
: doc
installdirs lang.install-info
2561 -rm -f
$(infodir)/cpp.
info* $(infodir)/gcc.
info*
2562 for f in
cpp.
info* gcc.
info*; do \
2563 $(INSTALL_DATA
) $$f $(infodir)/$$f; \
2565 -if
$(SHELL
) -c
'install-info --version' >/dev
/null
2>&1; then \
2566 if
[ -f
$(infodir)/dir ] ; then \
2567 for f in
cpp.
info gcc.
info; do \
2568 install-info
--dir-file
=$(infodir)/dir $(infodir)/$$f; \
2572 -chmod a-x
$(infodir)/cpp.
info* $(infodir)/gcc.
info*
2574 # Install the man pages.
2575 install-man
: installdirs $(srcdir)/gcc
.1 $(srcdir)/cccp
.1 lang.install-man
2576 -if
[ -f gcc-cross
$(exeext
) ] ; then \
2577 rm -f
$(man1dir)/$(GCC_CROSS_NAME
)$(manext); \
2578 $(INSTALL_DATA
) $(srcdir)/gcc
.1 $(man1dir)/$(GCC_CROSS_NAME
)$(manext); \
2579 chmod a-x
$(man1dir)/$(GCC_CROSS_NAME
)$(manext); \
2581 rm -f
$(man1dir)/$(GCC_INSTALL_NAME
)$(manext); \
2582 $(INSTALL_DATA
) $(srcdir)/gcc
.1 $(man1dir)/$(GCC_INSTALL_NAME
)$(manext); \
2583 chmod a-x
$(man1dir)/$(GCC_INSTALL_NAME
)$(manext); \
2585 -rm -f
$(man1dir)/cccp
$(manext)
2586 -$(INSTALL_DATA
) $(srcdir)/cccp
.1 $(man1dir)/cccp
$(manext)
2587 -chmod a-x
$(man1dir)/cccp
$(manext)
2589 # Install the library.
2590 install-libgcc
: libgcc.a
installdirs
2591 -if
[ -f libgcc.a
] ; then \
2592 rm -f
$(libsubdir
)/libgcc.a
; \
2593 $(INSTALL_DATA
) libgcc.a
$(libsubdir
)/libgcc.a
; \
2594 if
$(RANLIB_TEST_FOR_TARGET
) ; then \
2595 (cd
$(libsubdir
); $(RANLIB_FOR_TARGET
) libgcc.a
); else true
; fi
; \
2596 chmod a-x
$(libsubdir
)/libgcc.a
; \
2599 # Install multiple versions of libgcc.a.
2600 install-multilib
: stmp-multilib
installdirs
2601 for i in
`$(GCC_FOR_TARGET) --print-multi-lib`; do \
2602 dir=`echo $$i | sed -e 's/;.*$$//'`; \
2603 if
[ -d
$(libsubdir
)/$${dir} ]; then true
; else mkdir
$(libsubdir
)/$${dir}; fi
; \
2604 for f in libgcc.a
$(EXTRA_MULTILIB_PARTS
); do \
2605 rm -f
$(libsubdir
)/$${dir}/$${f}; \
2606 $(INSTALL_DATA
) $${dir}/$${f} $(libsubdir
)/$${dir}/$${f}; \
2608 if
$(RANLIB_TEST_FOR_TARGET
); then \
2609 (cd
$(libsubdir
)/$${dir}; $(RANLIB_FOR_TARGET
) libgcc.a
); \
2611 chmod a-x
$(libsubdir
)/$${dir}/libgcc.a
; \
2614 # Install all the header files built in the include subdirectory.
2615 install-headers
: install-include-dir
$(INSTALL_HEADERS_DIR
) $(INSTALL_ASSERT_H
)
2616 # Fix symlinks to absolute paths in the installed include directory to
2617 # point to the installed directory, not the build directory.
2618 # Don't need to use LN_S here since we really do need ln -s and no substitutes.
2619 -files
=`cd $(libsubdir)/include; find . -type l -print 2>/dev/null`; \
2620 if
[ $$?
-eq
0 ]; then \
2621 dir=`cd include; pwd`; \
2622 for i in
$$files; do \
2623 dest
=`ls -ld $(libsubdir)/include/$$i | sed -n 's/.*-> //p'`; \
2624 if expr
"$$dest" : "$$dir.*" > /dev
/null
; then \
2625 rm -f
$(libsubdir
)/include/$$i; \
2626 ln
-s
`echo $$i | sed "s|/[^/]*|/..|g" | sed 's|/..$$||'``echo "$$dest" | sed "s|$$dir||"` $(libsubdir
)/include/$$i; \
2631 # Create or recreate the gcc private include file directory.
2632 install-include-dir
: installdirs
2633 -rm -rf
$(libsubdir
)/include
2634 mkdir
$(libsubdir
)/include
2635 -chmod a
+rx
$(libsubdir
)/include
2637 # Install the include directory using tar.
2638 install-headers-tar
: stmp-headers
$(STMP_FIXPROTO
) install-include-dir
2639 # We use `pwd`/include instead of just include to problems with CDPATH
2640 # Unless a full pathname is provided, some shells would print the new CWD,
2641 # found in CDPATH, corrupting the output. We could just redirect the
2642 # output of `cd', but some shells lose on redirection within `()'s
2643 (cd
`pwd`/include ; \
2644 tar -cf
- .
; exit
0) |
(cd
$(libsubdir
)/include; tar $(TAROUTOPTS
) - )
2645 # /bin/sh on some systems returns the status of the first tar,
2646 # and that can lose with GNU tar which always writes a full block.
2647 # So use `exit 0' to ignore its exit status.
2649 # Install the include directory using cpio.
2650 install-headers-cpio
: stmp-headers
$(STMP_FIXPROTO
) install-include-dir
2651 # See discussion about the use of `pwd` above
2652 cd
`pwd`/include ; \
2653 find .
-print | cpio
-pdum
$(libsubdir
)/include
2655 # Put assert.h where it won't override GNU libc's assert.h.
2656 # It goes in a dir that is searched after GNU libc's headers;
2657 # thus, the following conditionals are no longer needed.
2658 # But it's not worth deleting them now.
2659 ## Don't replace the assert.h already there if it is not from GCC.
2660 ## This code would be simpler if it tested for -f ... && ! grep ...
2661 ## but supposedly the ! operator is missing in sh on some systems.
2662 install-assert-h
: assert.h
installdirs
2663 if
[ -f
$(assertdir
)/assert.h
]; \
2665 if grep
"__eprintf" $(assertdir
)/assert.h
>/dev
/null
; \
2667 rm -f
$(assertdir
)/assert.h
; \
2668 $(INSTALL_DATA
) $(srcdir)/assert.h
$(assertdir
)/assert.h
; \
2669 chmod a-x
$(assertdir
)/assert.h
; \
2673 rm -f
$(assertdir
)/assert.h
; \
2674 $(INSTALL_DATA
) $(srcdir)/assert.h
$(assertdir
)/assert.h
; \
2675 chmod a-x
$(assertdir
)/assert.h
; \
2678 # Use this target to install the program `collect2' under the name `collect2'.
2679 install-collect2
: collect2
installdirs
2680 $(INSTALL_PROGRAM
) collect2
$(exeext
) $(libsubdir
)/collect2
$(exeext
)
2681 # Install the driver program as $(libsubdir)/gcc for collect2.
2682 $(INSTALL_PROGRAM
) xgcc
$(exeext
) $(libsubdir
)/gcc
$(exeext
)
2684 # Cancel installation by deleting the installed files.
2685 uninstall: intl.
uninstall lang.
uninstall $(UNINSTALL_CPP
)
2686 -rm -rf
$(libsubdir
)
2687 -rm -rf
$(bindir)/$(GCC_INSTALL_NAME
)$(exeext
)
2688 -rm -rf
$(bindir)/$(GCC_CROSS_NAME
)$(exeext
)
2689 -rm -rf
$(bindir)/$(PROTOIZE_INSTALL_NAME
)$(exeext
)
2690 -rm -rf
$(bindir)/$(PROTOIZE_CROSS_NAME
)$(exeext
)
2691 -rm -rf
$(bindir)/$(UNPROTOIZE_INSTALL_NAME
)$(exeext
)
2692 -rm -rf
$(bindir)/$(UNPROTOIZE_CROSS_NAME
)$(exeext
)
2693 -rm -rf
$(bindir)/$(GCOV_INSTALL_NAME
)$(exeext
)
2694 -rm -rf
$(man1dir)/$(GCC_INSTALL_NAME
)$(manext)
2695 -rm -rf
$(man1dir)/$(GCC_CROSS_NAME
)$(manext)
2696 -rm -rf
$(man1dir)/cccp
$(manext)
2697 -rm -rf
$(man1dir)/protoize
$(manext)
2698 -rm -rf
$(man1dir)/unprotoize
$(manext)
2699 -rm -f
$(infodir)/cpp.
info* $(infodir)/gcc.
info*
2701 # These targets are for the dejagnu testsuites. The file site.exp
2702 # contains global variables that all the testsuites will use.
2704 # Set to $(target_alias)/ for cross.
2705 target_subdir
= @target_subdir@
2707 site.exp
: .
/config.status Makefile
2708 @echo
"Making a new config file..."
2711 -@mv site.exp site.bak
2712 @echo
"## these variables are automatically generated by make ##" > .
/tmp0
2713 @echo
"# Do not edit here. If you wish to override these values" >> .
/tmp0
2714 @echo
"# add them to the last section" >> .
/tmp0
2715 @echo
"set rootme \"`pwd`\"" >> .
/tmp0
2716 @echo
"set srcdir \"`cd ${srcdir}; pwd`\"" >> .
/tmp0
2717 @echo
"set host_triplet $(host_canonical)" >> .
/tmp0
2718 @echo
"set build_triplet $(build_canonical)" >> .
/tmp0
2719 @echo
"set target_triplet $(target)" >> .
/tmp0
2720 @echo
"set target_alias $(target_alias)" >> .
/tmp0
2721 # CFLAGS is set even though it's empty to show we reserve the right to set it.
2722 @echo
"set CFLAGS \"\"" >> .
/tmp0
2723 @echo
"set CXXFLAGS \"-I$(objdir)/../$(target_subdir)libio -I\$$srcdir/../libg++/src -I\$$srcdir/../libio -I\$$srcdir/../libstdc++ -I\$$srcdir/../libstdc++/stl -L$(objdir)/../$(target_subdir)libg++ -L$(objdir)/../$(target_subdir)libstdc++\"" >> .
/tmp0
2724 # If newlib has been configured, we need to pass -B to gcc so it can find
2725 # newlib's crt0.o if it exists. This will cause a "path prefix not used"
2726 # message if it doesn't, but the testsuite is supposed to ignore the message -
2727 # it's too difficult to tell when to and when not to pass -B (not all targets
2728 # have crt0's). We could only add the -B if ../newlib/crt0.o exists, but that
2729 # seems like too selective a test.
2730 # ??? Another way to solve this might be to rely on linker scripts. Then
2731 # theoretically the -B won't be needed.
2732 # We also need to pass -L ../ld so that the linker can find ldscripts.
2733 @if
[ -d
$(objdir
)/..
/$(target_subdir
)newlib
] ; then \
2734 echo
"set newlib_cflags \"-I$(objdir)/../$(target_subdir)newlib/targ-include -I\$$srcdir/../newlib/libc/include\"" >> .
/tmp0
; \
2735 echo
"set newlib_ldflags \"-B$(objdir)/../$(target_subdir)newlib/\"" >> .
/tmp0
; \
2736 echo
"append CFLAGS \" \$$newlib_cflags\"" >> .
/tmp0
; \
2737 echo
"append CXXFLAGS \" \$$newlib_cflags\"" >> .
/tmp0
; \
2738 echo
"append LDFLAGS \" \$$newlib_ldflags\"" >> .
/tmp0
; \
2741 @if
[ -d
$(objdir
)/..
/ld ] ; then \
2742 echo
"append LDFLAGS \" -L$(objdir)/../ld\"" >> .
/tmp0
; \
2745 echo
"set tmpdir $(objdir)/testsuite" >> .
/tmp0
2746 @echo
"set srcdir \"\$${srcdir}/testsuite\"" >> .
/tmp0
2747 @echo
"## All variables above are generated by configure. Do Not Edit ##" >> .
/tmp0
2748 @cat .
/tmp0
> site.exp
2749 @cat site.bak | sed \
2750 -e
'1,/^## All variables above are.*##/ d' >> site.exp
2753 CHECK_TARGETS
= check-gcc check-g
++ check-g77 check-objc
2755 check: $(CHECK_TARGETS
)
2757 testsuite
/site.exp
: site.exp
2758 if
[ -d testsuite
]; then \
2763 rm -rf testsuite
/site.exp
2764 cp site.exp testsuite
/site.exp
2766 check-g
++: testsuite
/site.exp
2767 -rootme
=`pwd`; export rootme
; \
2768 srcdir=`cd ${srcdir}; pwd` ; export srcdir ; \
2770 EXPECT
=${EXPECT} ; export EXPECT
; \
2771 if
[ -f
$${rootme}/..
/expect
/expect
] ; then \
2772 TCL_LIBRARY
=`cd ${srcdir}/../tcl/library ; pwd` ; \
2773 export TCL_LIBRARY
; fi
; \
2774 $(RUNTEST
) --tool g
++ $(RUNTESTFLAGS
)
2776 check-gcc
: testsuite
/site.exp
2777 -rootme
=`pwd`; export rootme
; \
2778 srcdir=`cd ${srcdir}; pwd` ; export srcdir ; \
2780 EXPECT
=${EXPECT} ; export EXPECT
; \
2781 if
[ -f
$${rootme}/..
/expect
/expect
] ; then \
2782 TCL_LIBRARY
=`cd ${srcdir}/../tcl/library ; pwd` ; \
2783 export TCL_LIBRARY
; fi
; \
2784 $(RUNTEST
) --tool gcc
$(RUNTESTFLAGS
)
2786 check-g77
: testsuite
/site.exp
2787 -rootme
=`pwd`; export rootme
; \
2788 srcdir=`cd ${srcdir}; pwd` ; export srcdir ; \
2790 EXPECT
=${EXPECT} ; export EXPECT
; \
2791 if
[ -f
$${rootme}/..
/expect
/expect
] ; then \
2792 TCL_LIBRARY
=`cd ${srcdir}/../tcl/library ; pwd` ; \
2793 export TCL_LIBRARY
; fi
; \
2794 $(RUNTEST
) --tool g77
$(RUNTESTFLAGS
)
2796 check-objc
: testsuite
/site.exp
2797 -rootme
=`pwd`; export rootme
; \
2798 srcdir=`cd ${srcdir}; pwd` ; export srcdir ; \
2800 EXPECT
=${EXPECT} ; export EXPECT
; \
2801 if
[ -f
$${rootme}/..
/expect
/expect
] ; then \
2802 TCL_LIBRARY
=`cd ${srcdir}/../tcl/library ; pwd` ; \
2803 export TCL_LIBRARY
; fi
; \
2804 $(RUNTEST
) --tool objc
$(RUNTESTFLAGS
)
2806 # These exist for maintenance purposes.
2808 # Update the tags table.
2812 mv
-f c-parse.
[ch
] cexp.c
=*.
[chy
] tmp-tags
; \
2813 etags
*.y
*.h
*.c
; \
2817 # Create the distribution tar.gz file.
2819 gzip
--best
< tmp-gcc.xtar
> tmp-gcc.xtar.gz
2820 mv tmp-gcc.xtar.gz gcc-
$(version
).
tar.gz
2822 tmp-gcc.xtar
: distdir
2823 # Make the distribution.
2824 tar -chf tmp-gcc.xtar gcc-
$(version
)
2827 if
[ -d
$(srcdir)/CVS
]; then cd
$(srcdir) && cvs
-r update
; fi
2829 # This target exists to do the initial work before the language specific
2831 distdir-start
: doc
$(srcdir)/INSTALL
$(srcdir)/c-parse.y
$(srcdir)/c-gperf.h \
2832 $(srcdir)/c-parse.c
$(srcdir)/cexp.c
$(srcdir)/config.in \
2833 $(srcdir)/version.c TAGS
2834 @case
'$(USE_NLS)' in \
2836 *) echo
"configure with --enable-nls before making a distribution"; \
2839 @if grep
-s
"for version ${mainversion}" gcc.texi
> /dev
/null
; \
2841 else echo
"You must update the version number in \`gcc.texi'"; sleep
10;\
2843 # Update the version number in README
2844 $(AWK
) '$$1 " " $$2 " " $$3 == "This directory contains" \
2845 { $$6 = version; print $$0 } \
2846 $$1 " " $$2 " " $$3 != "This directory contains"' \
2847 version
=$(version
) $(srcdir)/README
> tmp.README
2848 mv tmp.README README
2849 -rm -rf gcc-
$(version
) tmp
2850 # Put all the files in a temporary subdirectory
2851 # which has the name that we want to have in the tar file.
2858 for file in
`(cd $(srcdir) && echo *[0-9a-zA-Z+])`; do \
2859 test -f
$(srcdir)/$$file && $(LN_S
) $(srcdir)/$$file tmp
; \
2861 if
test "$(srcdir)" != "." ; then \
2862 for file in c-parse.c cexp.c
; do \
2863 test -f .
/$$file && $(LN_S
) ..
/$$file tmp
; \
2866 for file in
`(cd $(srcdir)/config && echo *[0-9a-zA-Z+])`; do \
2867 if
test -d
$(srcdir)/config
/$$file \
2868 && test "$$file" != RCS
&& test "$$file" != CVS
; then \
2869 mkdir tmp
/config
/$$file; \
2870 for subfile in
`(cd $(srcdir)/config/$$file && echo *[0-9a-zA-Z+])`; do \
2871 $(LN_S
) $(srcdir)/config
/$$file/$$subfile tmp
/config
/$$file; \
2874 $(LN_S
) $(srcdir)/config
/$$file tmp
/config
; \
2877 for file in
`(cd $(srcdir)/ginclude && echo *[0-9a-zA-Z+])`; do \
2878 $(LN_S
) $(srcdir)/ginclude
/$$file tmp
/ginclude
; \
2880 for file in
`(cd $(srcdir)/objc && echo *[0-9a-zA-Z+])`; do \
2881 $(LN_S
) $(srcdir)/objc
/$$file tmp
/objc
; \
2883 $(LN_S
) .gdbinit tmp
2885 # Finish making `distdir', after the languages have done their thing.
2887 mv tmp gcc-
$(version
)
2888 # Get rid of everything we don't want in the distribution. We'd want
2889 # this to use Makefile.in, but it doesn't have the `lang.foo' targets
2891 cd gcc-
$(version
); make extraclean distdir-check VERSION_DEP
=
2894 ($(AWK
) '/^[^#]/{print} /^#[A-Za-z]/{print substr($$1, 2)}' |
sort) \
2895 < po
/POTFILES.in
> tmp.POTFILES
2896 ls
[A-Za-z
]*.
[ch
] [a-z
]*/[A-Za-z
]*.
[ch
] \
2897 [a-z
]*/[a-z
]*/[A-Za-z
]*.
[ch
] |
sort > tmp.src
2898 diff tmp.POTFILES tmp.src ||
{ \
2899 echo
"po/POTFILES.in and sources do not match -- please fix"; \
2904 distdir
: distdir-cvs distdir-start intl.distdir intl.distdir-fixup \
2905 lang.distdir distdir-finish
2907 # make diff oldversion=M.N
2908 # creates a diff file between an older distribution and this one.
2909 # The -P option assumes this is GNU diff.
2911 diff
-rc2P
-x c-parse.y
-x c-parse.c
-x c-parse.h
-x c-gperf.h \
2912 -x cexp.c
-x
-x TAGS
-x INSTALL \
2913 -x configure
-x config.in \
2914 -x
"gcc.??" -x
"gcc.??s" -x gcc.aux
-x
"gcc.info*" \
2915 -x
"cpp.??" -x
"cpp.??s" -x
cpp.aux
-x
"cpp.info*" \
2916 $(LANG_DIFF_EXCLUDES
) \
2917 gcc-
$(oldversion
) gcc-
$(version
) > gcc-
$(oldversion
)-$(version
).diff
2919 bootstrap bootstrap-lean
: force
2920 # Only build the C compiler for stage1, because that is the only one that
2921 # we can guarantee will build with the native compiler, and also it is the
2922 # only thing useful for building stage2.
2923 $(MAKE
) CC
="$(CC)" libdir=$(libdir) LANGUAGES
="$(BOOT_LANGUAGES)"
2925 # This used to define ALLOCA as empty, but that would lead to bad results
2926 # for a subsequent `make install' since that would not have ALLOCA empty.
2927 # To prevent `make install' from compiling alloca.o and then relinking cc1
2928 # because alloca.o is newer, we permit these recursive makes to compile
2929 # alloca.o. Then cc1 is newer, so it won't have to be relinked.
2930 $(MAKE
) CC
="stage1/xgcc$(exeext) -Bstage1/ -B$(build_tooldir)/bin/" CFLAGS
="$(WARN_CFLAGS) $(BOOT_CFLAGS)" LDFLAGS
="$(BOOT_LDFLAGS)" libdir=$(libdir) STAGE_PREFIX
=stage1
/ LANGUAGES
="$(LANGUAGES)"
2932 -if
test $@
= bootstrap-lean
; then
rm -rf stage1
; else true
; fi
2933 $(MAKE
) CC
="stage2/xgcc$(exeext) -Bstage2/ -B$(build_tooldir)/bin/" CFLAGS
="$(WARN_CFLAGS) $(BOOT_CFLAGS)" LDFLAGS
="$(BOOT_LDFLAGS)" libdir=$(libdir) STAGE_PREFIX
=stage2
/ LANGUAGES
="$(LANGUAGES)"
2935 bootstrap2 bootstrap2-lean
: force
2936 $(MAKE
) CC
="stage1/xgcc$(exeext) -Bstage1/ -B$(build_tooldir)/bin/" CFLAGS
="$(WARN_CFLAGS) $(BOOT_CFLAGS)" LDFLAGS
="$(BOOT_LDFLAGS)" libdir=$(libdir) STAGE_PREFIX
=stage1
/ LANGUAGES
="$(LANGUAGES)"
2938 -if
test $@
= bootstrap2-lean
; then
rm -rf stage1
; else true
; fi
2939 $(MAKE
) CC
="stage2/xgcc$(exeext) -Bstage2/ -B$(build_tooldir)/bin/" CFLAGS
="$(WARN_CFLAGS) $(BOOT_CFLAGS)" LDFLAGS
="$(BOOT_LDFLAGS)" libdir=$(libdir) STAGE_PREFIX
=stage2
/ LANGUAGES
="$(LANGUAGES)"
2941 bootstrap3 bootstrap3-lean
: force
2942 $(MAKE
) CC
="stage2/xgcc$(exeext) -Bstage2/ -B$(build_tooldir)/bin/" CFLAGS
="$(WARN_CFLAGS) $(BOOT_CFLAGS)" LDFLAGS
="$(BOOT_LDFLAGS)" libdir=$(libdir) STAGE_PREFIX
=stage2
/ LANGUAGES
="$(LANGUAGES)"
2944 bootstrap4 bootstrap4-lean
: force
2945 $(MAKE
) CC
="stage3/xgcc$(exeext) -Bstage3/ -B$(build_tooldir)/bin/" CFLAGS
="$(WARN_CFLAGS) $(BOOT_CFLAGS)" LDFLAGS
="$(BOOT_LDFLAGS)" libdir=$(libdir) STAGE_PREFIX
=stage3
/ LANGUAGES
="$(LANGUAGES)"
2947 # Compare the object files in the current directory with those in the
2950 # ./ avoids bug in some versions of tail.
2951 compare compare3 compare4 compare-lean compare3-lean compare4-lean
: force
2953 case
"$@" in compare | compare-lean
) stage
=2 ;; * ) stage
=`echo $@ | sed -e 's,^compare\([0-9][0-9]*\).*,\1,'` ;; esac
; \
2954 for file in
*$(objext
); do \
2955 tail
+16c .
/$$file > tmp-foo1
; \
2956 tail
+16c stage
$$stage/$$file > tmp-foo2 \
2957 && (cmp tmp-foo1 tmp-foo2
> /dev
/null
2>&1 || echo
$$file differs
>> .bad_compare
) || true
; \
2959 case
"$@" in compare | compare-lean
) stage
=2 ;; * ) stage
=`echo $@ | sed -e 's,^compare\([0-9][0-9]*\).*,\1,'` ;; esac
; \
2960 for
dir in tmp-foo intl
$(SUBDIRS
); do \
2961 if
[ "`echo $$dir/*$(objext)`" != "$$dir/*$(objext)" ] ; then \
2962 for file in
$$dir/*$(objext
); do \
2963 tail
+16c .
/$$file > tmp-foo1
; \
2964 tail
+16c stage
$$stage/$$file > tmp-foo2 \
2965 && (cmp tmp-foo1 tmp-foo2
> /dev
/null
2>&1 || echo
$$file differs
>> .bad_compare
) || true
; \
2970 case
"$@" in compare | compare-lean
) stage
=2 ;; * ) stage
=`echo $@ | sed -e 's,^compare\([0-9][0-9]*\).*,\1,'` ;; esac
; \
2971 if
[ -f .bad_compare
]; then \
2972 echo
"Bootstrap comparison failure!"; \
2977 *-lean
) rm -rf stage
$$stage ;; \
2982 # Compare the object files in the current directory with those in the
2983 # stage2 directory. Use gnu cmp (diffutils v2.4 or later) to avoid
2984 # running tail and the overhead of twice copying each object file.
2986 gnucompare gnucompare3 gnucompare4 gnucompare-lean gnucompare3-lean gnucompare4-lean
: force
2988 case
"$@" in gnucompare | gnucompare-lean
) stage
=2 ;; * ) stage
=`echo $@ | sed -e 's,^gnucompare\([0-9][0-9]*\).*,\1,'` ;; esac
; \
2989 for file in
*$(objext
); do \
2990 (cmp
--ignore-initial
=16 $$file stage
$$stage/$$file > /dev
/null
2>&1 || echo
$$file differs
>> .bad_compare
) || true
; \
2992 case
"$@" in gnucompare | gnucompare-lean
) stage
=2 ;; * ) stage
=`echo $@ | sed -e 's,^gnucompare\([0-9][0-9]*\).*,\1,'` ;; esac
; \
2993 for
dir in tmp-foo intl
$(SUBDIRS
); do \
2994 if
[ "`echo $$dir/*$(objext)`" != "$$dir/*$(objext)" ] ; then \
2995 for file in
$$dir/*$(objext
); do \
2996 (cmp
--ignore-initial
=16 $$file stage
$$stage/$$file > /dev
/null
2>&1 || echo
$$file differs
>> .bad_compare
) || true
; \
3000 case
"$@" in gnucompare | gnucompare-lean
) stage
=2 ;; * ) stage
=`echo $@ | sed -e 's,^gnucompare\([0-9][0-9]*\).*,\1,'` ;; esac
; \
3001 if
[ -f .bad_compare
]; then \
3002 echo
"Bootstrap comparison failure!"; \
3007 *-lean
) rm -rf stage
$$stage ;; \
3011 # Copy the object files from a particular stage into a subdirectory.
3013 -if
[ -d stage1
] ; then true
; else mkdir stage1
; fi
3014 -for
dir in intl
$(SUBDIRS
) ; \
3016 if
[ -d stage1
/$$dir ] ; then true
; else mkdir stage1
/$$dir ; fi
; \
3018 -mv
$(STAGESTUFF
) stage1
3019 -mv intl
/*$(objext
) stage1
/intl
3020 # Copy as/ld if they exist to stage dir, so that running xgcc from the stage
3021 # dir will work properly.
3022 -if
[ -f
as$(exeext
) ] ; then
$(LN_S
) ..
/as$(exeext
) stage1
; else true
; fi
3023 -if
[ -f
ld$(exeext
) ] ; then
$(LN_S
) ..
/ld$(exeext
) stage1
; else true
; fi
3024 -if
[ -f collect-ld
$(exeext
) ] ; then
$(LN_S
) ..
/collect-ld
$(exeext
) stage1
; else true
; fi
3025 -rm -f stage1
/libgcc.a
3027 -if
$(RANLIB_TEST_FOR_TARGET
) ; then \
3028 $(RANLIB_FOR_TARGET
) stage1
/libgcc.a
; \
3030 -for f in ..
$(EXTRA_MULTILIB_PARTS
); do if
[ x
$${f} != x..
]; then \
3031 cp stage1
/$${f} .
; \
3034 stage1
: force stage1-start lang.stage1
3037 -if
[ -d stage2
] ; then true
; else mkdir stage2
; fi
3038 -for
dir in intl
$(SUBDIRS
) ; \
3040 if
[ -d stage2
/$$dir ] ; then true
; else mkdir stage2
/$$dir ; fi
; \
3042 -mv
$(STAGESTUFF
) stage2
3043 -mv intl
/*$(objext
) stage2
/intl
3044 # Copy as/ld if they exist to stage dir, so that running xgcc from the stage
3045 # dir will work properly.
3046 -if
[ -f
as$(exeext
) ] ; then
$(LN_S
) ..
/as$(exeext
) stage2
; else true
; fi
3047 -if
[ -f
ld$(exeext
) ] ; then
$(LN_S
) ..
/ld$(exeext
) stage2
; else true
; fi
3048 -if
[ -f collect-ld
] ; then
$(LN_S
) ..
/collect-ld
$(exeext
) stage2
; else true
; fi
3049 -rm -f stage2
/libgcc.a
3051 -if
$(RANLIB_TEST_FOR_TARGET
) ; then \
3052 $(RANLIB_FOR_TARGET
) stage2
/libgcc.a
; \
3054 -for f in ..
$(EXTRA_MULTILIB_PARTS
); do if
[ x
$${f} != x..
]; then \
3055 cp stage2
/$${f} .
; \
3058 stage2
: force stage2-start lang.stage2
3061 -if
[ -d stage3
] ; then true
; else mkdir stage3
; fi
3062 -for
dir in intl
$(SUBDIRS
) ; \
3064 if
[ -d stage3
/$$dir ] ; then true
; else mkdir stage3
/$$dir ; fi
; \
3066 -mv
$(STAGESTUFF
) stage3
3067 -mv intl
/*$(objext
) stage3
/intl
3068 # Copy as/ld if they exist to stage dir, so that running xgcc from the stage
3069 # dir will work properly.
3070 -if
[ -f
as$(exeext
) ] ; then
$(LN_S
) ..
/as$(exeext
) stage3
; else true
; fi
3071 -if
[ -f
ld$(exeext
) ] ; then
$(LN_S
) ..
/ld$(exeext
) stage3
; else true
; fi
3072 -if
[ -f collect-ld
$(exeext
) ] ; then
$(LN_S
) ..
/collect-ld
$(exeext
) stage3
; else true
; fi
3073 -rm -f stage3
/libgcc.a
3075 -if
$(RANLIB_TEST_FOR_TARGET
) ; then \
3076 $(RANLIB_FOR_TARGET
) stage3
/libgcc.a
; \
3078 -for f in ..
$(EXTRA_MULTILIB_PARTS
); do if
[ x
$${f} != x..
]; then \
3079 cp stage3
/$${f} .
; \
3082 stage3
: force stage3-start lang.stage3
3085 -if
[ -d stage4
] ; then true
; else mkdir stage4
; fi
3086 -for
dir in intl
$(SUBDIRS
) ; \
3088 if
[ -d stage4
/$$dir ] ; then true
; else mkdir stage4
/$$dir ; fi
; \
3090 -mv
$(STAGESTUFF
) stage4
3091 -mv intl
/*$(objext
) stage4
/intl
3092 # Copy as/ld if they exist to stage dir, so that running xgcc from the stage
3093 # dir will work properly.
3094 -if
[ -f
as$(exeext
) ] ; then
$(LN_S
) ..
/as$(exeext
) stage4
; else true
; fi
3095 -if
[ -f
ld$(exeext
) ] ; then
$(LN_S
) ..
/ld$(exeext
) stage4
; else true
; fi
3096 -if
[ -f collect-ld
$(exeext
) ] ; then
$(LN_S
) ..
/collect-ld
$(exeext
) stage4
; else true
; fi
3097 -rm -f stage4
/libgcc.a
3099 -if
$(RANLIB_TEST_FOR_TARGET
) ; then \
3100 $(RANLIB_FOR_TARGET
) stage4
/libgcc.a
; \
3102 -for f in ..
$(EXTRA_MULTILIB_PARTS
); do if
[ x
$${f} != x..
]; then \
3103 cp stage4
/$${f} .
; \
3106 stage4
: force stage4-start lang.stage4
3108 # Copy just the executable files from a particular stage into a subdirectory,
3109 # and delete the object files. Use this if you're just verifying a version
3110 # that is pretty sure to work, and you are short of disk space.
3111 risky-stage1
: stage1
3114 risky-stage2
: stage2
3117 risky-stage3
: stage3
3120 risky-stage4
: stage4
3123 #In GNU Make, ignore whether `stage*' exists.
3124 .PHONY
: stage1 stage2 stage3 stage4
clean maintainer-clean TAGS bootstrap
3125 .PHONY
: risky-stage1 risky-stage2 risky-stage3 risky-stage4
3130 # The enquire rules are still useful for building new float-anything.h.
3131 # Special flags for compiling enquire.
3132 # We disable optimization to make floating point more reliable.
3133 ENQUIRE_CFLAGS
= -DNO_MEM
-DNO_LONG_DOUBLE_IO
-O0
3134 ENQUIRE_LDFLAGS
= $(LDFLAGS
)
3136 # Enquire target (This is a variable so that a target can choose not to
3140 # Test to see whether <float.h> exists in the system header files,
3141 # and is not derived from GCC.
3143 [ -f
$(SYSTEM_HEADER_DIR
)/float.h
] && \
3144 if grep
'ifndef _FLOAT_H___' $(SYSTEM_HEADER_DIR
)/float.h
>/dev
/null
; \
3147 # We pretend to not having a usable <float.h>, hence disable the FLOAT_H_TEST
3148 # to ensure, we're emitting a full blown <float.h> ourselves.
3149 FLOAT_H_TEST
= false
3151 # Used to compile enquire with standard cc, but have forgotten why.
3152 # Let's try with GCC.
3153 enquire
: enquire.o
$(GCC_PARTS
)
3154 $(GCC_FOR_TARGET
) $(GCC_CFLAGS
) $(ENQUIRE_LDFLAGS
) enquire.o
-o
$@
3155 enquire.o
: $(srcdir)/enquire.c
$(GCC_PASSES
) stmp-int-hdrs
3156 if
$(FLOAT_H_TEST
); then \
3157 rm -f
include/float.h
; \
3158 SYS_FLOAT_H_WRAP
=1; \
3160 SYS_FLOAT_H_WRAP
=0; \
3162 $(GCC_FOR_TARGET
) $(GCC_CFLAGS
) $(ALL_CPPFLAGS
) $(ENQUIRE_CFLAGS
) \
3163 -DSYS_FLOAT_H_WRAP
=$$SYS_FLOAT_H_WRAP \
3164 -I.
-c
$(srcdir)/enquire.c
3166 # Create float.h source for the native machine.
3167 # Make it empty if we can use the system float.h without changes.
3168 float.h-nat
: enquire
3169 -.
/enquire
-f
> tmp-float.h
3170 grep
'#define [^_]' tmp-float.h
>/dev
/null || true
> tmp-float.h
3171 mv tmp-float.h float.h-nat
3173 # Create a dummy float.h source for a cross-compiler.
3174 # ??? This isn't used anymore. Should we create config/float-unkn.h
3175 # and make that the default float_format in configure?
3177 echo
"#ifndef __GCC_FLOAT_NOT_NEEDED" > t-float.h-cross
3178 echo
"#error float.h values not known for cross-compiler" >> t-float.h-cross
3179 echo
"#endif" >> t-float.h-cross
3180 mv t-float.h-cross float.h-cross