]>
git.ipfire.org Git - thirdparty/gcc.git/blob - gcc/genopinit.c
1 /* Generate code to initialize optabs from machine description.
2 Copyright (C) 1993, 94-97, 1998 Free Software Foundation, Inc.
4 This file is part of GNU CC.
6 GNU CC is free software; you can redistribute it and/or modify
7 it under the terms of the GNU General Public License as published by
8 the Free Software Foundation; either version 2, or (at your option)
11 GNU CC is distributed in the hope that it will be useful,
12 but WITHOUT ANY WARRANTY; without even the implied warranty of
13 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 GNU General Public License for more details.
16 You should have received a copy of the GNU General Public License
17 along with GNU CC; see the file COPYING. If not, write to
18 the Free Software Foundation, 59 Temple Place - Suite 330,
19 Boston, MA 02111-1307, USA. */
33 static struct obstack obstack
;
34 struct obstack
*rtl_obstack
= &obstack
;
36 #define obstack_chunk_alloc xmalloc
37 #define obstack_chunk_free free
39 #ifdef NEED_DECLARATION_FREE
42 extern rtx
read_rtx ();
48 /* Many parts of GCC use arrays that are indexed by machine mode and
49 contain the insn codes for pattern in the MD file that perform a given
50 operation on operands of that mode.
52 These patterns are present in the MD file with names that contain
53 the mode(s) used and the name of the operation. This program
54 writes a function `init_all_optabs' that initializes the optabs with
55 all the insn codes of the relevant patterns present in the MD file.
57 This array contains a list of optabs that need to be initialized. Within
58 each string, the name of the pattern to be matched against is delimited
59 with %( and %). In the string, %a and %b are used to match a short mode
60 name (the part of the mode name not including `mode' and converted to
61 lower-case). When writing out the initializer, the entire string is
62 used. %A and %B are replaced with the full name of the mode; %a and %b
63 are replaced with the short form of the name, as above.
65 If %N is present in the pattern, it means the two modes must be consecutive
66 widths in the same mode class (e.g, QImode and HImode). %I means that
67 only integer modes should be considered for the next mode, and %F means
68 that only float modes should be considered.
70 For some optabs, we store the operation by RTL codes. These are only
71 used for comparisons. In that case, %c and %C are the lower-case and
72 upper-case forms of the comparison, respectively. */
74 /* The reason we use \% is to avoid sequences of the form %-capletter-%
75 which SCCS treats as magic. This gets warnings which you should ignore. */
78 { "extendtab[(int) %B][(int) %A][0] = CODE_FOR_%(extend%a\%b2%)",
79 "extendtab[(int) %B][(int) %A][1] = CODE_FOR_%(zero_extend%a\%b2%)",
80 "fixtab[(int) %A][(int) %B][0] = CODE_FOR_%(fix%F\%a%I\%b2%)",
81 "fixtab[(int) %A][(int) %B][1] = CODE_FOR_%(fixuns%F\%a%b2%)",
82 "fixtrunctab[(int) %A][(int) %B][0] = CODE_FOR_%(fix_trunc%F\%a%I\%b2%)",
83 "fixtrunctab[(int) %A][(int) %B][1] = CODE_FOR_%(fixuns_trunc%F\%a%I\%b2%)",
84 "floattab[(int) %B][(int) %A][0] = CODE_FOR_%(float%I\%a%F\%b2%)",
85 "floattab[(int) %B][(int) %A][1] = CODE_FOR_%(floatuns%I\%a%F\%b2%)",
86 "add_optab->handlers[(int) %A].insn_code = CODE_FOR_%(add%a3%)",
87 "sub_optab->handlers[(int) %A].insn_code = CODE_FOR_%(sub%a3%)",
88 "smul_optab->handlers[(int) %A].insn_code = CODE_FOR_%(mul%a3%)",
89 "umul_highpart_optab->handlers[(int) %A].insn_code = CODE_FOR_%(umul%a3_highpart%)",
90 "smul_highpart_optab->handlers[(int) %A].insn_code = CODE_FOR_%(smul%a3_highpart%)",
91 "smul_widen_optab->handlers[(int) %B].insn_code = CODE_FOR_%(mul%a%b3%)%N",
92 "umul_widen_optab->handlers[(int) %B].insn_code = CODE_FOR_%(umul%a%b3%)%N",
93 "sdiv_optab->handlers[(int) %A].insn_code = CODE_FOR_%(div%I\%a3%)",
94 "udiv_optab->handlers[(int) %A].insn_code = CODE_FOR_%(udiv%I\%a3%)",
95 "sdivmod_optab->handlers[(int) %A].insn_code = CODE_FOR_%(divmod%a4%)",
96 "udivmod_optab->handlers[(int) %A].insn_code = CODE_FOR_%(udivmod%a4%)",
97 "smod_optab->handlers[(int) %A].insn_code = CODE_FOR_%(mod%a3%)",
98 "umod_optab->handlers[(int) %A].insn_code = CODE_FOR_%(umod%a3%)",
99 "flodiv_optab->handlers[(int) %A].insn_code = CODE_FOR_%(div%F\%a3%)",
100 "ftrunc_optab->handlers[(int) %A].insn_code = CODE_FOR_%(ftrunc%F\%a2%)",
101 "and_optab->handlers[(int) %A].insn_code = CODE_FOR_%(and%a3%)",
102 "ior_optab->handlers[(int) %A].insn_code = CODE_FOR_%(ior%a3%)",
103 "xor_optab->handlers[(int) %A].insn_code = CODE_FOR_%(xor%a3%)",
104 "ashl_optab->handlers[(int) %A].insn_code = CODE_FOR_%(ashl%a3%)",
105 "ashr_optab->handlers[(int) %A].insn_code = CODE_FOR_%(ashr%a3%)",
106 "lshr_optab->handlers[(int) %A].insn_code = CODE_FOR_%(lshr%a3%)",
107 "rotl_optab->handlers[(int) %A].insn_code = CODE_FOR_%(rotl%a3%)",
108 "rotr_optab->handlers[(int) %A].insn_code = CODE_FOR_%(rotr%a3%)",
109 "smin_optab->handlers[(int) %A].insn_code = CODE_FOR_%(smin%I\%a3%)",
110 "smin_optab->handlers[(int) %A].insn_code = CODE_FOR_%(min%F\%a3%)",
111 "smax_optab->handlers[(int) %A].insn_code = CODE_FOR_%(smax%I\%a3%)",
112 "smax_optab->handlers[(int) %A].insn_code = CODE_FOR_%(max%F\%a3%)",
113 "umin_optab->handlers[(int) %A].insn_code = CODE_FOR_%(umin%I\%a3%)",
114 "umax_optab->handlers[(int) %A].insn_code = CODE_FOR_%(umax%I\%a3%)",
115 "neg_optab->handlers[(int) %A].insn_code = CODE_FOR_%(neg%a2%)",
116 "abs_optab->handlers[(int) %A].insn_code = CODE_FOR_%(abs%a2%)",
117 "sqrt_optab->handlers[(int) %A].insn_code = CODE_FOR_%(sqrt%a2%)",
118 "sin_optab->handlers[(int) %A].insn_code = CODE_FOR_%(sin%a2%)",
119 "cos_optab->handlers[(int) %A].insn_code = CODE_FOR_%(cos%a2%)",
120 "strlen_optab->handlers[(int) %A].insn_code = CODE_FOR_%(strlen%a%)",
121 "one_cmpl_optab->handlers[(int) %A].insn_code = CODE_FOR_%(one_cmpl%a2%)",
122 "ffs_optab->handlers[(int) %A].insn_code = CODE_FOR_%(ffs%a2%)",
123 "mov_optab->handlers[(int) %A].insn_code = CODE_FOR_%(mov%a%)",
124 "movstrict_optab->handlers[(int) %A].insn_code = CODE_FOR_%(movstrict%a%)",
125 "cmp_optab->handlers[(int) %A].insn_code = CODE_FOR_%(cmp%a%)",
126 "tst_optab->handlers[(int) %A].insn_code = CODE_FOR_%(tst%a%)",
127 "bcc_gen_fctn[(int) %C] = gen_%(b%c%)",
128 "setcc_gen_code[(int) %C] = CODE_FOR_%(s%c%)",
129 "movcc_gen_code[(int) %A] = CODE_FOR_%(mov%acc%)",
130 "reload_in_optab[(int) %A] = CODE_FOR_%(reload_in%a%)",
131 "reload_out_optab[(int) %A] = CODE_FOR_%(reload_out%a%)",
132 "movstr_optab[(int) %A] = CODE_FOR_%(movstr%a%)",
133 "clrstr_optab[(int) %A] = CODE_FOR_%(clrstr%a%)" };
135 /* Allow linking with print-rtl.c. */
136 char **insn_name_ptr
;
142 char *name
= XSTR (insn
, 0);
146 char *np
, *pp
, *p
, *q
;
148 /* Don't mention instructions whose names are the null string.
149 They are in the machine description just to be recognized. */
153 /* See if NAME matches one of the patterns we have for the optabs we know
156 for (pindex
= 0; pindex
< sizeof optabs
/ sizeof optabs
[0]; pindex
++)
158 int force_float
= 0, force_int
= 0;
159 int force_consec
= 0;
162 for (pp
= optabs
[pindex
]; pp
[0] != '%' || pp
[1] != '('; pp
++)
165 for (pp
+= 2, np
= name
; matches
&& ! (pp
[0] == '%' && pp
[1] == ')');
186 for (op
= 0; op
< NUM_RTX_CODE
; op
++)
188 for (p
= rtx_name
[op
], q
= np
; *p
; p
++, q
++)
192 /* We have to be concerned about matching "gt" and
193 missing "gtu", e.g., so verify we have reached the
194 end of thing we are to match. */
195 if (*p
== 0 && *q
== 0 && rtx_class
[op
] == '<')
199 if (op
== NUM_RTX_CODE
)
202 np
+= strlen (rtx_name
[op
]);
206 /* This loop will stop at the first prefix match, so
207 look through the modes in reverse order, in case
208 EXTRA_CC_MODES was used and CC is a prefix of the
209 CC modes (as it should be). */
210 for (i
= ((int) MAX_MACHINE_MODE
) - 1; i
>= 0; i
--)
212 for (p
= mode_name
[i
], q
= np
; *p
; p
++, q
++)
213 if (tolower (*p
) != *q
)
217 && (! force_int
|| mode_class
[i
] == MODE_INT
)
218 && (! force_float
|| mode_class
[i
] == MODE_FLOAT
))
225 m1
= i
, np
+= strlen (mode_name
[i
]);
227 m2
= i
, np
+= strlen (mode_name
[i
]);
229 force_int
= force_float
= 0;
237 if (matches
&& pp
[0] == '%' && pp
[1] == ')'
239 && (! force_consec
|| (int) GET_MODE_WIDER_MODE(m1
) == m2
))
243 if (pindex
== sizeof optabs
/ sizeof optabs
[0])
246 /* We found a match. If this pattern is only conditionally present,
247 write out the "if" and two extra blanks. */
249 if (*XSTR (insn
, 2) != 0)
250 printf (" if (HAVE_%s)\n ", name
);
254 /* Now write out the initialization, making all required substitutions. */
255 for (pp
= optabs
[pindex
]; *pp
; pp
++)
263 case 'I': case 'F': case 'N':
266 for (np
= mode_name
[m1
]; *np
; np
++)
267 printf ("%c", tolower (*np
));
270 for (np
= mode_name
[m2
]; *np
; np
++)
271 printf ("%c", tolower (*np
));
274 printf ("%smode", mode_name
[m1
]);
277 printf ("%smode", mode_name
[m2
]);
280 printf ("%s", rtx_name
[op
]);
283 for (np
= rtx_name
[op
]; *np
; np
++)
284 printf ("%c", toupper (*np
));
296 register char *val
= (char *) malloc (size
);
299 fatal ("virtual memory exhausted");
309 char *result
= (char *) realloc (ptr
, size
);
311 fatal ("virtual memory exhausted");
319 fprintf (stderr
, "genopinit: ");
320 fprintf (stderr
, s
, a1
, a2
);
321 fprintf (stderr
, "\n");
322 exit (FATAL_EXIT_CODE
);
325 /* More 'friendly' abort that prints the line and file.
326 config.h can #define abort fancy_abort if you like that sort of thing. */
331 fatal ("Internal gcc abort.");
343 obstack_init (rtl_obstack
);
346 fatal ("No input file name.");
348 infile
= fopen (argv
[1], "r");
352 exit (FATAL_EXIT_CODE
);
357 printf ("/* Generated automatically by the program `genopinit'\n\
358 from the machine description file `md'. */\n\n");
360 printf ("#include \"config.h\"\n");
361 printf ("#include <stdio.h>\n");
362 printf ("#include \"rtl.h\"\n");
363 printf ("#include \"flags.h\"\n");
364 printf ("#include \"insn-flags.h\"\n");
365 printf ("#include \"insn-codes.h\"\n");
366 printf ("#include \"insn-config.h\"\n");
367 printf ("#include \"recog.h\"\n");
368 printf ("#include \"expr.h\"\n");
369 printf ("#include \"reload.h\"\n\n");
371 printf ("void\ninit_all_optabs ()\n{\n");
373 /* Read the machine description. */
377 c
= read_skip_spaces (infile
);
382 desc
= read_rtx (infile
);
383 if (GET_CODE (desc
) == DEFINE_INSN
|| GET_CODE (desc
) == DEFINE_EXPAND
)
390 exit (ferror (stdout
) != 0 ? FATAL_EXIT_CODE
: SUCCESS_EXIT_CODE
);