1 2014-02-11 Yao Qi <yao@codesourcery.com>
3 * target.h (enum target_xfer_error): Rename to ...
4 (enum target_xfer_status): ... it. New. All users updated.
5 (enum target_xfer_status) <TARGET_XFER_OK>, <TARGET_XFER_EOF>:
7 (TARGET_XFER_STATUS_ERROR_P): New macro.
8 (target_xfer_error_to_string): Remove declaration.
9 (target_xfer_status_to_string): Declare.
10 (target_xfer_partial_ftype): Adjust it.
11 (struct target_ops) <to_xfer_partial>: Return
12 target_xfer_status. Add argument xfered_len. Update
14 * target.c (target_xfer_error_to_string): Rename to ...
15 (target_xfer_status_to_string): ... it. New. All callers
17 (target_read_live_memory): Likewise. Call target_xfer_partial
18 instead of target_read.
19 (memory_xfer_live_readonly_partial): Return
20 target_xfer_status. Add argument xfered_len.
21 (raw_memory_xfer_partial): Likewise.
22 (memory_xfer_partial_1): Likewise.
23 (memory_xfer_partial): Likewise.
24 (target_xfer_partial): Likewise. Check *XFERED_LEN is set
25 properly. Update debug message.
26 (default_xfer_partial, current_xfer_partial): Likewise.
27 (target_write_partial): Likewise.
28 (target_read_partial): Likewise. All callers updated.
29 (read_whatever_is_readable): Likewise.
30 (target_write_with_progress): Likewise.
31 (target_read_alloc_1): Likewise.
33 * aix-thread.c (aix_thread_xfer_partial): Likewise.
34 * auxv.c (procfs_xfer_auxv): Likewise.
35 (ld_so_xfer_auxv, memory_xfer_auxv): Likewise.
36 * bfd-target.c (target_bfd_xfer_partial): Likewise.
37 * bsd-kvm.c (bsd_kvm_xfer_partial): Likewise.
38 * bsd-uthread.c (bsd_uthread_xfer_partia): Likewise.
39 * corefile.c (read_memory): Adjust.
40 * corelow.c (core_xfer_partial): Likewise.
41 * ctf.c (ctf_xfer_partial): Likewise.
42 * darwin-nat.c (darwin_read_dyld_info): Likewise. All callers
44 (darwin_xfer_partial): Likewise.
45 * exec.c (section_table_xfer_memory_partial): Likewise. All
47 (exec_xfer_partial): Likewise.
48 * exec.h (section_table_xfer_memory_partial): Update
50 * gnu-nat.c (gnu_xfer_memory): Likewise. Assert 'res' is not
52 (gnu_xfer_partial): Likewise.
53 * ia64-hpux-nat.c (ia64_hpux_xfer_memory_no_bs): Likewise.
54 (ia64_hpux_xfer_memory, ia64_hpux_xfer_uregs): Likewise.
55 (ia64_hpux_xfer_solib_got): Likewise.
56 * inf-ptrace.c (inf_ptrace_xfer_partial): Likewise. Change
57 type of 'partial_len' to ULONGEST.
58 * inf-ttrace.c (inf_ttrace_xfer_partial): Likewise.
59 * linux-nat.c (linux_xfer_siginfo ): Likewise.
60 (linux_nat_xfer_partial): Likewise.
61 (linux_proc_xfer_partial, linux_xfer_partial): Likewise.
62 (linux_proc_xfer_spu, linux_nat_xfer_osdata): Likewise.
63 * monitor.c (monitor_xfer_memory): Likewise.
64 (monitor_xfer_partial): Likewise.
65 * procfs.c (procfs_xfer_partial): Likewise.
66 * record-btrace.c (record_btrace_xfer_partial): Likewise.
67 * record-full.c (record_full_xfer_partial): Likewise.
68 (record_full_core_xfer_partial): Likewise.
69 * remote-sim.c (gdbsim_xfer_memory): Likewise.
70 (gdbsim_xfer_partial): Likewise.
71 * remote.c (remote_write_bytes_aux): Likewise. All callers
73 (remote_write_bytes, remote_read_bytes): Likewise. All
75 (remote_flash_erase): Likewise. All callers updated.
76 (remote_write_qxfer): Likewise. All callers updated.
77 (remote_read_qxfer): Likewise. All callers updated.
78 (remote_xfer_partial): Likewise.
79 * rs6000-nat.c (rs6000_xfer_partial): Likewise.
80 (rs6000_xfer_shared_libraries): Likewise.
81 * sol-thread.c (sol_thread_xfer_partial): Likewise.
82 (sol_thread_xfer_partial): Likewise.
83 * sparc-nat.c (sparc_xfer_wcookie): Likewise.
84 (sparc_xfer_partial): Likewise.
85 * spu-linux-nat.c (spu_proc_xfer_spu): Likewise. All callers
87 (spu_xfer_partial): Likewise.
88 * spu-multiarch.c (spu_xfer_partial): Likewise.
89 * tracepoint.c (tfile_xfer_partial): Likewise.
90 * windows-nat.c (windows_xfer_memory): Likewise.
91 (windows_xfer_shared_libraries): Likewise.
92 (windows_xfer_partial): Likewise.
93 * valprint.c: Replace 'target_xfer_error' with
94 'target_xfer_status' in comments.
96 2014-02-11 Simon Marchi <simon.marchi@ericsson.com> (tiny patch)
98 Checked in by Joel Brobecker <brobecker@adacore.com>.
99 * mi/mi-main.c (mi_cmd_data_write_memory_bytes): Fix comment.
101 2014-02-11 Joel Brobecker <brobecker@adacore.com>
103 * symfile-debug.c (debug_qf_expand_symtabs_matching): Reformat
106 2014-02-10 Will Newton <will.newton@linaro.org>
108 * elfread.c (elf_rel_plt_read): Look for a .got section if
109 looking up .got.plt fails.
110 (elf_gnu_ifunc_resolve_by_got): Call gdbarch_addr_bits_remove
111 on address passed to elf_gnu_ifunc_record_cache.
112 (elf_gnu_ifunc_resolve_addr): Likewise.
113 (elf_gnu_ifunc_resolver_return_stop): Likewise.
115 2014-02-10 Jose E. Marchesi <jose.marchesi@oracle.com>
117 * sparc-tdep.c (sparc_in_function_epilogue_p): New function.
118 (X_RETTURN): New macro.
119 * sparc-tdep.h: sparc_in_function_epilogue_p prototype.
121 * sparc64-tdep.c (sparc64_init_abi): Hook
122 sparc_in_function_epilogue_p.
124 2014-02-10 Gary Benson <gbenson@redhat.com>
126 * symfile-debug.c (debug_qf_expand_symtabs_matching):
127 Rename name_matcher to symbol_matcher.
129 2014-02-10 Gary Benson <gbenson@redhat.com>
131 * symfile-debug.c (debug_qf_expand_symtabs_matching):
132 Use expand_symtabs_file_matcher_ftype and
133 expand_symtabs_symbol_matcher_ftype.
135 2014-02-10 Joel Brobecker <brobecker@adacore.com>
137 * ada-lang.c (struct cache_entry, HASH_SIZE): Move definition up.
138 (struct ada_symbol_cache): New.
139 (ada_free_symbol_cache): Forward declare.
140 (struct ada_pspace_data): New.
141 (ada_pspace_data_handle): New static global.
142 (get_ada_pspace_data, ada_pspace_data_cleanup)
143 (ada_init_symbol_cache, ada_free_symbol_cache): New functions.
144 (cache_space, cache): Delete, now folded inside struct
146 (ada_get_symbol_cache): New function.
147 (ada_clear_symbol_cache, find_entry, cache_symbol): Adjust
149 (_initialize_ada_language): Remove initialization of cache_space.
150 Move call to observer_attach_inferior_exit up, grouping it
151 with the other observer registrations inside this function.
152 Rename command to be more general. Add call to
153 register_program_space_data_with_cleanup.
155 2014-02-10 Joel Brobecker <brobecker@adacore.com>
157 * ada-tasks.c (ada_tasks_new_objfile_observer): Renames
158 ada_new_objfile_observer.
159 (ada_tasks_normal_stop_observer): Renames ada_normal_stop_observer.
160 (_initialize_tasks): Update uses of ada_new_objfile_observer
161 and ada_tasks_normal_stop_observer.
163 2014-02-10 Joel Brobecker <brobecker@adacore.com>
165 * ada-lang.c (ada_evaluate_subexp): Set the type of the value
166 returned by the 'Length attribute to integer.
168 2014-02-10 Joel Brobecker <brobecker@adacore.com>
170 * ada-lang.c (_initialize_ada_language): Initialize
173 2014-02-10 Joel Brobecker <brobecker@adacore.com>
175 * ada-lang.c (HASH_SIZE): New macro.
176 (struct cache_entry): New type.
177 (cache_space, cache): New static globals.
178 (ada_clear_symbol_cache, find_entry): New functions.
179 (lookup_cached_symbol, cache_symbol): Implement.
180 (ada_new_objfile_observer, ada_free_objfile_observer): New.
181 (_initialize_ada_language): Attach ada_new_objfile_observer
182 and ada_free_objfile_observer.
184 2014-02-10 Joel Brobecker <brobecker@adacore.com>
186 * ada-lang.c (ada_add_block_symbols, add_defn_to_vec)
187 (lookup_cached_symbol, ada_add_local_symbols): Add "const" to
188 struct block * parameter.
189 (ada_lookup_symbol_list_worker): Constify local variable "block".
190 Remove cast which is no longer necessary.
192 2014-02-10 Doug Evans <xdje42@gmail.com>
194 Add Guile as an extension language.
195 * NEWS: Mention Guile scripting.
196 * Makefile.in (SUBDIR_GUILE_OBS): New variable.
197 (SUBDIR_GUILE_SRCS, SUBDIR_GUILE_DEPS): New variables
198 (SUBDIR_GUILE_LDFLAGS, SUBDIR_GUILE_CFLAGS): New variables.
199 (INTERNAL_CPPFLAGS): Add GUILE_CPPFLAGS.
200 (CLIBS): Add GUILE_LIBS.
201 (install-guile): New rule.
203 (scm-arch.o, scm-auto-load.o, scm-block.o): New rules.
204 (scm-breakpoint.o, scm-disasm.o, scm-exception.o): New rules.
205 (scm-frame.o, scm-iterator.o, scm-lazy-string.o): New rules.
206 (scm-math.o, scm-objfile.o, scm-ports.o): New rules.
207 (scm-pretty-print.o, scm-safe-call.o, scm-gsmob.o): New rules.
208 (scm-string.o, scm-symbol.o, scm-symtab.o): New rules.
209 (scm-type.o, scm-utils.o, scm-value.o): New rules.
210 * configure.ac: New option --with-guile.
211 * configure: Regenerate.
212 * config.in: Regenerate.
213 * auto-load.c: Remove #include "python/python.h". Add #include
214 "gdb/section-scripts.h".
215 (source_section_scripts): Handle Guile scripts.
216 (_initialize_auto_load): Add name of Guile objfile script to
217 scripts-directory help text.
218 * breakpoint.c (condition_command): Tweak comment to include Scheme.
219 * breakpoint.h (gdbscm_breakpoint_object): Add forward decl.
220 (struct breakpoint): New member scm_bp_object.
221 * defs.h (enum command_control_type): New value guile_control.
222 * cli/cli-cmds.c: Remove #include "python/python.h". Add #include
224 (show_user): Update comment.
225 (_initialize_cli_cmds): Update help text for "show user". Update help
226 text for max-user-call-depth.
227 * cli/cli-script.c: Remove #include "python/python.h". Add #include
229 (multi_line_command_p): Add guile_control.
230 (print_command_lines): Handle guile_control.
231 (execute_control_command, recurse_read_control_structure): Ditto.
232 (process_next_line): Recognize "guile" commands.
233 * disasm.c (gdb_disassemble_info): Make non-static.
234 * disasm.h: #include "dis-asm.h".
235 (struct gdbarch): Add forward decl.
236 (gdb_disassemble_info): Declare.
237 * extension.c: #include "guile/guile.h".
238 (extension_languages): Add guile.
239 (get_ext_lang_defn): Handle EXT_LANG_GDB.
240 * extension.h (enum extension_language): New value EXT_LANG_GUILE.
241 * gdbtypes.c (get_unsigned_type_max): New function.
242 (get_signed_type_minmax): New function.
243 * gdbtypes.h (get_unsigned_type_max): Declare.
244 (get_signed_type_minmax): Declare.
245 * guile/README: New file.
246 * guile/guile-internal.h: New file.
247 * guile/guile.c: New file.
248 * guile/guile.h: New file.
249 * guile/scm-arch.c: New file.
250 * guile/scm-auto-load.c: New file.
251 * guile/scm-block.c: New file.
252 * guile/scm-breakpoint.c: New file.
253 * guile/scm-disasm.c: New file.
254 * guile/scm-exception.c: New file.
255 * guile/scm-frame.c: New file.
256 * guile/scm-gsmob.c: New file.
257 * guile/scm-iterator.c: New file.
258 * guile/scm-lazy-string.c: New file.
259 * guile/scm-math.c: New file.
260 * guile/scm-objfile.c: New file.
261 * guile/scm-ports.c: New file.
262 * guile/scm-pretty-print.c: New file.
263 * guile/scm-safe-call.c: New file.
264 * guile/scm-string.c: New file.
265 * guile/scm-symbol.c: New file.
266 * guile/scm-symtab.c: New file.
267 * guile/scm-type.c: New file.
268 * guile/scm-utils.c: New file.
269 * guile/scm-value.c: New file.
270 * guile/lib/gdb.scm: New file.
271 * guile/lib/gdb/boot.scm: New file.
272 * guile/lib/gdb/experimental.scm: New file.
273 * guile/lib/gdb/init.scm: New file.
274 * guile/lib/gdb/iterator.scm: New file.
275 * guile/lib/gdb/printing.scm: New file.
276 * guile/lib/gdb/types.scm: New file.
277 * data-directory/Makefile.in (GUILE_SRCDIR): New variable.
278 (VPATH): Add $(GUILE_SRCDIR).
279 (GUILE_DIR): New variable.
280 (GUILE_INSTALL_DIR, GUILE_FILES): New variables.
281 (all): Add stamp-guile dependency.
282 (stamp-guile): New rule.
283 (clean-guile, install-guile, uninstall-guile): New rules.
284 (install-only): Add install-guile dependency.
285 (uninstall): Add uninstall-guile dependency.
286 (clean): Add clean-guile dependency.
288 2014-02-09 Doug Evans <xdje42@gmail.com>
290 Revert this patch (which I approved, mea culpa).
292 2014-02-08 Mark Kettenis <kettenis@gnu.org>
294 * Makefile.in (all-lib): Remove.
295 ($(LIBGNU) $(GNULIB_H)): Replace with gits of remove all-lib target.
297 2014-02-09 Jan Kratochvil <jan.kratochvil@redhat.com>
299 Fix Python stack corruption.
300 * python/py-linetable.c (ltpy_get_pcs_for_line, ltpy_has_line): Use
303 2014-02-08 Mark Kettenis <kettenis@gnu.org>
305 * Makefile.in (all-lib): Remove.
306 ($(LIBGNU) $(GNULIB_H)): Replace with gits of remove all-lib target.
308 2014-02-07 Doug Evans <dje@google.com>
310 * extension-priv.h (extension_language_script_ops): Add comment.
311 (extension_language_ops): Add comment.
312 (active_ext_lang_state): Fix typo in comment.
314 2014-02-07 Pedro Alves <palves@redhat.com>
316 * infrun.c (handle_signal_stop) <signal arrives while stepping
317 over a breakpoint>: Switch back to the stepping thread.
319 2014-02-07 Yao Qi <yao@codesourcery.com>
321 * target.c (target_xfer_partial): Return zero if LEN is zero.
323 2014-02-07 Yao Qi <yao@codesourcery.com>
325 * auxv.c (procfs_xfer_auxv): Replace -1 with TARGET_XFER_E_IO.
326 (ld_so_xfer_auxv): Likewise.
327 * bfd-target.c (target_bfd_xfer_partial): Likewise.
328 * bsd-kvm.c (bsd_kvm_xfer_partial): Likewise.
329 * corelow.c (core_xfer_partial): Likewise.
330 * ctf.c (ctf_xfer_partial): Likewise.
331 * darwin-nat.c (darwin_read_dyld_info): Likewise.
332 (darwin_xfer_partial): Likewise.
333 * exec.c (exec_xfer_partial): Likewise.
334 * gnu-nat.c (gnu_xfer_partial): Likewise.
335 * ia64-hpux-nat.c (ia64_hpux_xfer_uregs): Likewise.
336 * inf-ptrace.c (inf_ptrace_xfer_partial): Likewise.
337 * inf-ttrace.c (inf_ttrace_xfer_partial): Likewise.
338 * linux-nat.c (linux_xfer_siginfo): Likewise.
339 (linux_proc_xfer_spu): Likewise.
340 * procfs.c (procfs_xfer_partial): Likewise.
341 * record-full.c (record_full_xfer_partial): Likewise.
342 (record_full_core_xfer_partial): Likewise.
343 * remote-sim.c (gdbsim_xfer_partial): Likewise.
344 * remote.c (remote_write_qxfer): Likewise.
345 (remote_write_qxfer, remote_read_qxfer): Likewise.
346 (remote_xfer_partial): Likewise.
347 * rs6000-nat.c (rs6000_xfer_partial): Likewise.
348 (rs6000_xfer_shared_libraries): Likewise.
349 * sparc-nat.c (sparc_xfer_wcookie): Likewise.
350 * spu-linux-nat.c (spu_proc_xfer_spu): Likewise.
351 (spu_xfer_partial): Likewise.
352 * target.c (memory_xfer_partial_1): Likewise.
353 * tracepoint.c (tfile_xfer_partial): Likewise.
354 * windows-nat.c (windows_xfer_shared_libraries): Likewise.
355 (windows_xfer_partial): Likewise.
357 2014-02-07 Yao Qi <yao@codesourcery.com>
359 * gdbarch.sh (core_xfer_shared_libraries): Returns ULONGEST. Add
361 (core_xfer_shared_libraries_aix): Likewise.
362 * gdbarch.c, gdbarch.h: Regenerated.
363 * i386-cygwin-tdep.c (windows_core_xfer_shared_libraries): Return
364 ULONGEST. Change 'len_avail' type to ULONGEST.
365 * rs6000-aix-tdep.c (rs6000_aix_ld_info_to_xml): Likewise.
366 * rs6000-aix-tdep.h (rs6000_aix_ld_info_to_xml): Update
368 (rs6000_aix_core_xfer_shared_libraries_aix): Return ULONGEST.
370 2014-02-07 Yao Qi <yao@codesourcery.com>
372 * corefile.c (memory_error): Get 'exception' from ERR and pass
373 'exception' to throw_error.
375 2014-02-06 Doug Evans <xdje42@gmail.com>
377 * configure.ac (libpython checking): Remove all but python.o from
378 CONFIG_OBS. Remove all but python.c from CONFIG_SRCS.
379 * configure: Regenerate.
381 * Makefile.in (SFILES): Add extension.c.
382 (HFILES_NO_SRCDIR): Add extension.h, extension-priv.h
383 (COMMON_OBS): Add extension.o.
384 * extension.h: New file.
385 * extension-priv.h: New file.
386 * extension.c: New file.
388 * python/python-internal.h: #include "extension.h".
389 (gdbpy_auto_load_enabled): Declare.
390 (gdbpy_apply_val_pretty_printer): Declare.
391 (gdbpy_apply_frame_filter): Declare.
392 (gdbpy_preserve_values): Declare.
393 (gdbpy_breakpoint_cond_says_stop): Declare.
394 (gdbpy_breakpoint_has_cond): Declare.
395 (void source_python_script_for_objfile): Delete.
396 * python/python.c: #include "extension-priv.h".
397 Delete inclusion of "observer.h".
398 (extension_language_python): Moved here and renamed from
399 script_language_python in py-auto-load.c.
400 Redefined to be of type extension_language_defn.
401 (python_extension_script_ops): New global.
402 (python_extension_ops): New global.
403 (struct python_env): New member previous_active.
404 (restore_python_env): Call restore_active_ext_lang.
405 (ensure_python_env): Call set_active_ext_lang.
406 (gdbpy_clear_quit_flag): Renamed from clear_quit_flag, made static.
408 (gdbpy_set_quit_flag): Renamed from set_quit_flag, made static.
410 (gdbpy_check_quit_flag): Renamed from check_quit_flag, made static.
412 (gdbpy_eval_from_control_command): Renamed from
413 eval_python_from_control_command, made static. New arg extlang.
414 (gdbpy_source_script) Renamed from source_python_script, made static.
416 (gdbpy_before_prompt_hook): Renamed from before_prompt_hook. Change
417 result to int. New arg extlang.
418 (gdbpy_source_objfile_script): Renamed from
419 source_python_script_for_objfile, made static. New arg extlang.
420 (gdbpy_start_type_printers): Renamed from start_type_printers, made
421 static. New args extlang, extlang_printers. Change result type to
423 (gdbpy_apply_type_printers): Renamed from apply_type_printers, made
424 static. New arg extlang. Rename arg printers to extlang_printers
425 and change type to ext_lang_type_printers *.
426 (gdbpy_free_type_printers): Renamed from free_type_printers, made
427 static. Replace argument arg with extlang, extlang_printers.
428 (!HAVE_PYTHON, eval_python_from_control_command): Delete.
429 (!HAVE_PYTHON, source_python_script): Delete.
430 (!HAVE_PYTHON, gdbpy_should_stop): Delete.
431 (!HAVE_PYTHON, gdbpy_breakpoint_has_py_cond): Delete.
432 (!HAVE_PYTHON, start_type_printers): Delete.
433 (!HAVE_PYTHON, apply_type_printers): Delete.
434 (!HAVE_PYTHON, free_type_printers): Delete.
435 (_initialize_python): Delete call to observer_attach_before_prompt.
436 (finalize_python): Set/restore active extension language.
437 (gdbpy_finish_initialization) Renamed from
438 finish_python_initialization, made static. New arg extlang.
439 (gdbpy_initialized): New function.
440 * python/python.h: #include "extension.h". Delete #include
441 "value.h", "mi/mi-cmds.h".
442 (extension_language_python): Declare.
443 (GDBPY_AUTO_FILE_NAME): Delete.
444 (enum py_bt_status): Moved to extension.h and renamed to
446 (enum frame_filter_flags): Moved to extension.h.
447 (enum py_frame_args): Moved to extension.h and renamed to
449 (finish_python_initialization): Delete.
450 (eval_python_from_control_command): Delete.
451 (source_python_script): Delete.
452 (apply_val_pretty_printer): Delete.
453 (apply_frame_filter): Delete.
454 (preserve_python_values): Delete.
455 (gdbpy_script_language_defn): Delete.
456 (gdbpy_should_stop, gdbpy_breakpoint_has_py_cond): Delete.
457 (start_type_printers, apply_type_printers, free_type_printers): Delete.
459 * auto-load.c: #include "extension.h".
460 (GDB_AUTO_FILE_NAME): Delete.
461 (auto_load_gdb_scripts_enabled): Make public. New arg extlang.
462 (script_language_gdb): Delete, moved to extension.c and renamed to
463 extension_language_gdb.
464 (source_gdb_script_for_objfile): Delete.
465 (auto_load_pspace_info): New member unsupported_script_warning_printed.
466 (loaded_script): Change type of language member to
467 struct extension_language_defn *.
468 (init_loaded_scripts_info): Initialize
469 unsupported_script_warning_printed.
470 (maybe_add_script): Make static. Change type of language arg to
471 struct extension_language_defn *.
472 (clear_section_scripts): Reset unsupported_script_warning_printed.
473 (auto_load_objfile_script_1): Rewrite to use extension language API.
474 (auto_load_objfile_script): Make public. Remove support-compiled-in
475 and auto-load-enabled checks, moved to auto_load_scripts_for_objfile.
476 (source_section_scripts): Rewrite to use extension language API.
477 (load_auto_scripts_for_objfile): Rewrite to use
478 auto_load_scripts_for_objfile.
479 (collect_matching_scripts_data): Change type of language member to
480 struct extension_language_defn *.
481 (auto_load_info_scripts): Change type of language arg to
482 struct extension_language_defn *.
483 (unsupported_script_warning_print): New function.
484 (script_not_found_warning_print): Make static.
485 (_initialize_auto_load): Rewrite construction of scripts-directory
487 * auto-load.h (struct objfile): Add forward decl.
488 (struct script_language): Delete.
489 (struct auto_load_pspace_info): Add forward decl.
490 (struct extension_language_defn): Add forward decl.
491 (maybe_add_script): Delete.
492 (auto_load_objfile_script): Declare.
493 (script_not_found_warning_print): Delete.
494 (auto_load_info_scripts): Update prototype.
495 (auto_load_gdb_scripts_enabled): Declare.
496 * python/py-auto-load.c (gdbpy_auto_load_enabled): Renamed from
497 auto_load_python_scripts_enabled and made public.
498 (script_language_python): Delete, moved to python.c.
499 (gdbpy_script_language_defn): Delete.
500 (info_auto_load_python_scripts): Update to use
501 extension_language_python.
503 * breakpoint.c (condition_command): Replace call to
504 gdbpy_breakpoint_has_py_cond with call to get_breakpoint_cond_ext_lang.
505 (bpstat_check_breakpoint_conditions): Replace call to gdbpy_should_stop
506 with call to breakpoint_ext_lang_cond_says_stop.
507 * python/py-breakpoint.c (gdbpy_breakpoint_cond_says_stop): Renamed
508 from gdbpy_should_stop. Change result type to enum scr_bp_stop.
509 New arg slang. Return SCR_BP_STOP_UNSET if py_bp_object is NULL.
510 (gdbpy_breakpoint_has_cond): Renamed from gdbpy_breakpoint_has_py_cond.
512 (local_setattro): Print name of extension language with existing
515 * valprint.c (val_print, value_print): Update to call
516 apply_ext_lang_val_pretty_printer.
517 * cp-valprint.c (cp_print_value): Update call to
518 apply_ext_lang_val_pretty_printer.
519 * python/py-prettyprint.c: Remove #ifdef HAVE_PYTHON.
520 (gdbpy_apply_val_pretty_printer): Renamed from
521 apply_val_pretty_printer. New arg extlang.
522 (!HAVE_PYTHON, apply_val_pretty_printer): Delete.
524 * cli/cli-cmds.c (source_script_from_stream): Rewrite to use
525 extension language API.
526 * cli/cli-script.c (execute_control_command): Update to call
527 eval_ext_lang_from_control_command.
529 * mi/mi-cmd-stack.c (mi_cmd_stack_list_frames): Update to use
530 enum ext_lang_bt_status values. Update call to
531 apply_ext_lang_frame_filter.
532 (mi_cmd_stack_list_locals): Ditto.
533 (mi_cmd_stack_list_args): Ditto.
534 (mi_cmd_stack_list_variables): Ditto.
535 * mi/mi-main.c: Delete #include "python/python-internal.h".
536 Add #include "extension.h".
537 (mi_cmd_list_features): Replace reference to python internal variable
538 gdb_python_initialized with call to ext_lang_initialized_p.
540 * stack.c (backtrace_command_1): Update to use enum ext_lang_bt_status.
541 Update to use enum ext_lang_frame_args. Update to call
542 apply_ext_lang_frame_filter.
543 * python/py-framefilter.c (extract_sym): Update to use enum
545 (extract_value, py_print_type, py_print_value): Ditto.
546 (py_print_single_arg, enumerate_args, enumerate_locals): Ditto.
547 (py_mi_print_variables, py_print_locals, py_print_args): Ditto.
548 (py_print_frame): Ditto.
549 (gdbpy_apply_frame_filter): Renamed from apply_frame_filter.
550 New arg extlang. Update to use enum ext_lang_bt_status.
552 * top.c (gdb_init): Delete #ifdef HAVE_PYTHON call to
553 finish_python_initialization. Replace with call to
554 finish_ext_lang_initialization.
556 * typeprint.c (do_free_global_table): Update to call
557 free_ext_lang_type_printers.
558 (create_global_typedef_table): Update to call
559 start_ext_lang_type_printers.
560 (find_global_typedef): Update to call apply_ext_lang_type_printers.
561 * typeprint.h (struct ext_lang_type_printers): Add forward decl.
562 (type_print_options): Change type of global_printers from "void *"
563 to "struct ext_lang_type_printers *".
565 * value.c (preserve_values): Update to call preserve_ext_lang_values.
566 * python/py-value.c: Remove #ifdef HAVE_PYTHON.
567 (gdbpy_preserve_values): Renamed from preserve_python_values.
569 (!HAVE_PYTHON, preserve_python_values): Delete.
571 * utils.c (quit_flag): Delete, moved to extension.c.
572 (clear_quit_flag, set_quit_flag, check_quit_flag): Delete, moved to
575 * eval.c: Delete #include "python/python.h".
576 * main.c: Delete #include "python/python.h".
578 * defs.h: Update comment.
580 2014-02-06 Joel Brobecker <brobecker@adacore.com>
584 2014-02-05 Mark Kettenis <kettenis@gnu.org>
586 * c-exp.y (YYPRINT, c_print_token): Only define if YYBISON is
589 2014-02-05 Yao Qi <yao@codesourcery.com>
591 * remote.c (remote_pass_signals): Remove local 'buf' and use
593 (remote_program_signals): Likewise.
595 2014-02-05 Yao Qi <yao@codesourcery.com>
597 * ctf.c: Include "inferior.h" and "gdbthread.h".
598 (CTF_PID): A new macro.
599 (ctf_open): Call inferior_appeared and add_thread_silent.
600 (ctf_close): Call exit_inferior_silent and set inferior_ptid.
601 (ctf_thread_alive): New function.
602 (init_ctf_ops): Install ctf_thread_alive to to_thread_alive.
604 2014-02-05 Yao Qi <yao@codesourcery.com>
608 2013-05-24 Yao Qi <yao@codesourcery.com>
610 * tracepoint.c (TFILE_PID): Remove.
611 (tfile_open): Don't add thread and inferior.
612 (tfile_close): Don't set 'inferior_ptid'. Don't call
613 exit_inferior_silent.
614 (tfile_thread_alive): Remove.
615 (init_tfile_ops): Don't set field 'to_thread_alive' of
618 2014-02-04 Christian Eggers <ceggers@gmx.de> (tiny change)
620 * remote.c (remote_start_remote): Call remote_check_symbols even
621 if only symbol-file (not file) has been given.
623 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
625 * gdbarch.sh (skip_entrypoint): New callback.
626 * gdbarch.c, gdbarch.h: Regenerate.
627 * symtab.c (skip_prologue_sal): Call gdbarch_skip_entrypoint.
628 * infrun.c (fill_in_stop_func): Likewise.
629 * ppc-linux-tdep.c: Include "elf/ppc64.h".
630 (ppc_elfv2_elf_make_msymbol_special): New function.
631 (ppc_elfv2_skip_entrypoint): Likewise.
632 (ppc_linux_init_abi): Install them for ELFv2.
634 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
636 * ppc-sysv-tdep.c (ppc64_aggregate_candidate): New routine.
637 (ppc64_elfv2_abi_homogeneous_aggregate): Likewise.
638 (ppc64_sysv_abi_push_param): Handle ELFv2 homogeneous structs.
639 (ppc64_sysv_abi_return_value): Likewise. Also, handle small
640 structures returned in GPRs.
642 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
644 * ppc-sysv-tdep.c (ppc64_sysv_abi_push_dummy_call): Use correct
645 offset to the stack parameter list for the ELFv2 ABI.
647 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
649 * ppc-linux-tdep.c (ppc_linux_init_abi): Only call
650 set_gdbarch_convert_from_func_ptr_addr and
651 set_gdbarch_elf_make_msymbol_special for ELFv1.
652 * ppc-sysv-tdep.c (ppc64_sysv_abi_push_param): Only handle
653 function descriptors on ELFv1.
654 (ppc64_sysv_abi_push_dummy_call): Likewise. On ELFv2,
655 set up r12 at function entry.
657 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
659 * ppc-tdep.h (enum powerpc_elf_abi): New data type.
660 (struct gdbarch_tdep): New member elf_abi.
662 * rs6000-tdep.c: Include "elf/ppc64.h".
663 (rs6000_gdbarch_init): Detect ELF ABI version.
665 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
667 * ppc-sysv-tdep.c (ppc64_sysv_abi_push_freg): Use correct order
668 within a register pair holding a DFP 128-bit value on little-endian.
669 (ppc64_sysv_abi_return_value_base): Likewise.
670 * rs6000-tdep.c (dfp_pseudo_register_read): Likewise.
671 (dfp_pseudo_register_write): Likewise.
673 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
675 * ppc-sysv-tdep.c (ppc64_sysv_abi_push_freg): Use correct
676 offset on little-endian when passing _Decimal32.
677 (ppc64_sysv_abi_return_value_base): Likewise for return values.
679 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
681 * rs6000-tdep.c (efpr_pseudo_register_read): Use correct offset
682 of the overlapped FP register within the VSX register on little-
684 (efpr_pseudo_register_write): Likewise.
686 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
688 * ppc-sysv-tdep.c (ppc64_sysv_abi_push_val): Use correct
689 offset on little-endian when passing small structures.
691 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
693 * ppc-sysv-tdep.c (get_decimal_float_return_value): Update comment.
694 (struct ppc64_sysv_argpos): New data structure.
695 (ppc64_sysv_abi_push_float): Remove.
696 (ppc64_sysv_abi_push_val): New function.
697 (ppc64_sysv_abi_push_integer): Likewise.
698 (ppc64_sysv_abi_push_freg): Likewise.
699 (ppc64_sysv_abi_push_vreg): Likewise.
700 (ppc64_sysv_abi_push_param): Likewise.
701 (ppc64_sysv_abi_push_dummy_call): Refactor to use those new routines.
702 (ppc64_sysv_abi_return_value_base): New function.
703 (ppc64_sysv_abi_return_value): Refactor to use it.
705 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
707 * NEWS: Document new target powerpc64le-*-linux*.
709 2014-02-04 Mark Kettenis <kettenis@gnu.org>
711 * sparc64obsd-tdep.c (sparc64obsd_gregset): New variable.
712 (sparc64obsd_supply_gregset): Handle registers sets used in ELF
714 (sparc64obsd_init_abi): Adjust minimum size of the general purpose
715 register set used in ELF core dumps. Add floating-point register set.
717 2014-02-03 Kevin Buettner <kevinb@redhat.com>
719 * mn10300-tdep.c (mn10300_dwarf2_reg_to_regnum): Rewrite
720 dwarf2_to_gdb[] table using symbolic constants. Adjust
721 penultimate entry from number representing the PC register
722 to symbolic constant representing the MDR register. Add
723 constant for the PC register to the end of the table.
725 2014-02-03 Mark Kettenis <kettenis@gnu.org>
727 * bsd-kvm.c: Include <sys/param.h>
729 2014-02-03 Mark Kettenis <kettenis@gnu.org>
731 * sparc64nbsd-nat.c (sparc64nbsd_supply_fpregset): Fix prototype.
733 2014-01-31 Joel Brobecker <brobecker@adacore.com>
735 * ada-lang.h (clear_ada_sym_cache): Delete.
737 2014-01-30 Ulrich Weigand <uweigand@de.ibm.com>
739 * auxv.c (fprint_target_auxv): Handle AT_HWCAP2.
741 2014-01-29 Jose E. Marchesi <jose.marchesi@oracle.com>
743 * sparc64-linux-tdep.c (sparc64_linux_step_trap): Get PC from
744 the sigreturn register save area only if the syscall is
747 2014-01-29 Joel Brobecker <brobecker@adacore.com>
749 * valops.c (value_slice): Minor reformatting.
751 2014-01-28 Ulrich Weigand <uweigand@de.ibm.com>
753 * ppc64-tdep.c (ppc64_standard_linkage7): Fix typo.
755 2014-01-28 Joel Brobecker <brobecker@adacore.com>
757 * ada-lang.c (maint_set_ada_cmdlist, maint_show_ada_cmdlist):
759 (maint_set_ada_cmd, maint_show_ada_cmd): New functions.
760 (ada_ignore_descriptive_types_p): New static global.
761 (find_parallel_type_by_descriptive_type): Return immediately
762 if ada_ignore_descriptive_types_p is set.
763 (_initialize_ada_language): Register new commands "maintenance
764 set ada", "maintenance show ada", "maintenance set ada
765 ignore-descriptive-types" and "maintenance show ada
766 ignore-descriptive-types".
767 * NEWS: Add entry for new "maint ada set/show
768 ignore-descriptive-types" commands.
770 2014-01-27 Markus Metzger <markus.t.metzger@intel.com>
772 * record-btrace.c (record_btrace_close): Call btrace_teardown
775 2014-01-27 Joel Brobecker <brobecker@adacore.com>
777 * ada-lang.c: Remove "#ifdef UI_OUT" condition for including
780 2014-01-27 Joel Brobecker <brobecker@adacore.com>
782 * ada-typeprint (type_is_full_subrange_of_target_type):
784 (print_range): Add parameter bounds_prefered_p. If not set,
785 try printing range types using the name of their base type.
786 (print_range_type): Add parameter bounds_prefered_p.
787 Use it in call to print_range.
788 (print_array_type, ada_print_type): Update calls to print_range
789 and print_range_type.
791 2014-01-27 Joel Brobecker <brobecker@adacore.com>
793 * ada-typeprint.c (print_array_type, print_choices, print_range)
794 (print_range_bound, print_dynamic_range_bound, print_range_type):
797 2014-01-27 Joel Brobecker <brobecker@adacore.com>
799 * ada-typeprint.c (print_range): Add missing empty line
800 after local declaration.
802 2014-01-27 Joel Brobecker <brobecker@adacore.com>
804 * ada-valprint.c (print_optional_low_bound): Get index_type's
805 target type for as long as it is a TYPE_CODE_RANGE.
807 2014-01-27 Joel Brobecker <brobecker@adacore.com>
809 * procfs.c (procfs_make_note_section): Remove assertion and
812 2014-01-24 Yao Qi <yao@codesourcery.com>
814 * remote.c (remote_read_bytes): Change type of len to ULONGEST.
815 * corelow.c (get_core_siginfo): Likewise.
817 2014-01-24 Yao Qi <yao@codesourcery.com>
819 * remote.c (remote_write_bytes_aux): Change type of 'len' to
820 ULONGEST. Don't check 'len' is negative.
821 (remote_write_bytes): Change type of 'len' to ULONGEST.
823 2014-01-23 Tom Tromey <tromey@redhat.com>
826 * python/lib/gdb/FrameDecorator.py: (FrameVars.fetch_frame_args):
827 Handle exception from frame.block.
828 (FrameVars.fetch_frame_locals): Likewise.
830 2014-01-23 Tom Tromey <tromey@redhat.com>
833 * python/py-framefilter.c (py_print_frame): Don't call Py_DECREF
834 on a NULL pointer. Move "goto error" to correct place.
836 2014-01-23 Tom Tromey <tromey@redhat.com>
839 * python/py-framefilter.c (apply_frame_filter): Call
840 ensure_python_env after computing gdbarch.
842 2014-01-23 Yao Qi <yao@codesourcery.com>
844 * target.c (raw_memory_xfer_partial): Change argument type
845 from void * to gdb_byte *.
846 (memory_xfer_partial_1, memory_xfer_partial): Likewise.
848 2014-01-22 Doug Evans <dje@google.com>
850 New gdbserver option --debug-format=timestamp.
853 2014-01-22 Andreas Arnez <arnez@vnet.linux.ibm.com>
855 * syscalls/s390x-linux.xml: New file.
856 * syscalls/s390-linux.xml: New file.
857 * s390-linux-tdep.c (XML_SYSCALL_FILENAME_S390): New macro.
858 (XML_SYSCALL_FILENAME_S390X): Likewise.
859 (op_svc): New enum value for SVC opcode.
860 (s390_sigtramp_frame_sniffer): Replace literal by 'op_svc'.
861 (s390_linux_get_syscall_number): New function.
862 (s390_gdbarch_init): Register '*get_syscall_number' and the
863 syscall xml file name.
864 * data-directory/Makefile.in (SYSCALLS_FILES): Add
865 "s390-linux.xml" and "s390x-linux.xml".
866 * NEWS: Announce new feature.
868 2014-01-22 Baruch Siach <baruch@tkos.co.il>
870 * xtensa-tdep.h (xtensa_elf_greg_t): Change type to uint32_t.
872 2014-01-22 Pedro Alves <palves@redhat.com>
874 * xtensa-config.c: Include defs.h.
876 2014-01-22 Joel Brobecker <brobecker@adacore.com>
878 * common/common-utils.h: Add "ARI:" comment beside __func__
881 2014-01-22 Joel Brobecker <brobecker@adacore.com>
883 * common/common-utils.h (FUNCTION_NAME): Expand the macro's
886 2014-01-21 Roland McGrath <mcgrathr@google.com>
888 * configure.ac: Call AM_PROG_INSTALL_STRIP.
889 * configure: Regenerate.
890 * aclocal.m4: Regenerate.
891 * Makefile.in (install_sh, INSTALL_STRIP_PROGRAM, STRIP):
892 New substituted variables.
893 (install-strip): New target.
894 (INSTALL_SCRIPT): New substituted variable.
895 (FLAGS_TO_PASS): Add it.
896 (install-only): Use $(INSTALL_SCRIPT) rather than
897 $(INSTALL_PROGRAM) for gcore.
899 2014-01-20 Tom Tromey <tromey@redhat.com>
901 * cli/cli-decode.h (struct cmd_list_element): Move all bitfields
904 2014-01-20 Tom Tromey <tromey@redhat.com>
906 * cli/cli-decode.c (add_cmd, deprecate_cmd, add_alias_cmd)
907 (add_setshow_cmd_full, delete_cmd, lookup_cmd_1)
908 (deprecated_cmd_warning, complete_on_cmdlist): Update.
909 * cli/cli-decode.h (CMD_DEPRECATED, DEPRECATED_WARN_USER)
910 (MALLOCED_REPLACEMENT, DOC_ALLOCATED): Remove.
911 (struct cmd_list_element) <flags>: Remove.
912 <cmd_deprecated, deprecated_warn_user, malloced_replacement,
913 doc_allocated>: New fields.
914 <hook_in, allow_unknown, abbrev_flag, type, var_type>: Now
916 * maint.c (maintenance_do_deprecate): Update.
917 * top.c (execute_command): Update.
919 2014-01-20 Baruch Siach <baruch@tkos.co.il>
921 * xtensa-linux-nat.c: Include asm/ptrace.h.
923 2014-01-17 Iain Buclaw <ibuclaw@gdcproject.org>
925 * Makefile.in (SFILES): Add d-support.c.
926 (COMMON_OBS): Add d-support.o.
927 * d-lang.h (d_parse_symbol): Add comment, now defined in
929 * d-lang.c (parse_call_convention)
930 (parse_attributes, parse_function_types)
931 (parse_function_args, parse_type, parse_identifier)
932 (call_convention_p, d_parse_symbol): Move functions to ...
933 * d-support.c: ... New file.
935 2014-01-17 Iain Buclaw <ibuclaw@gdcproject.org>
937 * d-lang.h (d_parse_symbol): Add declaration.
938 * d-lang.c (extract_identifiers)
939 (extract_type_info): Remove functions.
940 (parse_call_convention, parse_attributes)
941 (parse_function_types, parse_function_args)
942 (parse_type, parse_identifier, call_convention_p)
943 (d_parse_symbol): New functions.
944 (d_demangle): Use d_parse_symbol to demangle D symbols.
946 2014-01-17 Iain Buclaw <ibuclaw@gdcproject.org>
948 * d-lang.h (struct builtin_d_type): New data type.
949 (builtin_d_type): Add declaration.
950 * d-lang.c (d_language_arch_info, build_d_types)
951 (builtin_d_type): New functions.
952 (enum d_primitive_types): New data type.
953 (d_language_defn): Change c_language_arch_info to
954 d_language_arch_info.
955 (d_type_data): New static variable.
956 (_initialize_d_language): Initialize d_type_data.
958 2014-01-17 Iain Buclaw <ibuclaw@gdcproject.org>
960 * d-lang.h (d_main_name): Add declaration.
961 * d-lang.c (d_main_name): New function.
962 * symtab.c (find_main_name): Add call to d_main_name.
964 2014-01-17 Iain Buclaw <ibuclaw@gdcproject.org>
966 * d-lang.c (d_language_defn): Change macro_expansion_c to
969 2014-01-17 Iain Buclaw <ibuclaw@gdcproject.org>
971 * MAINTAINERS: Add myself as a write-after-approval maintainer.
973 2014-01-17 Sergio Durigan Junior <sergiodj@redhat.com>
975 * breakpoint.c (insert_bp_location): Add "volatile" keyword to "struct
976 gdb_exception" declaration.
977 * remote.c (getpkt_or_notif_sane): Likewise.
979 2014-01-17 Doug Evans <dje@google.com>
981 * common/gdb_vecs.c (delim_string_to_char_ptr_vec_append): New
982 function, contents of dirnames_to_char_ptr_vec_append moved here.
983 (delim_string_to_char_ptr_vec): New function.
984 (dirnames_to_char_ptr_vec_append): Rewrite.
985 * common/gdb_vecs.h (delim_string_to_char_ptr_vec): Declare.
987 2014-01-17 Doug Evans <dje@google.com>
989 * common/common-utils.h (FUNCTION_NAME): Renamed from ASSERT_FUNCTION,
991 * common/gdb_assert.h (ASSERT_FUNCTION): ... from here.
992 #include "common-utils.h".
993 (gdb_assert, gdb_assert_fail, gdb_assert_not_reached): Update.
994 * common/vec.h (VEC_ASSERT_PASS): Update.
995 * darwin-nat.h: Replace #include of gdb_assert.h with common-utils.h.
996 (MACH_CHECK_ERROR): Update.
998 2014-01-17 Simon Marchi <simon.marchi@ericsson.com>
1000 * gdbarch.sh (gdbarch_address_class_name_to_type_flags): Add
1002 * gdbarch.h: Regenerate.
1004 2014-01-16 Tom Tromey <tromey@redhat.com>
1006 * value.c (struct value) <regnum>: Move earlier.
1008 2014-01-16 Tom Tromey <tromey@redhat.com>
1010 * remote.c (extended_remote_create_inferior): Rename from
1011 extended_remote_create_inferior_1. Add "ops" argument. Remove
1014 2014-01-16 Pedro Alves <palves@redhat.com>
1016 * s390-linux-tdep.c (s390_frame_unwind_cache): Swallow
1017 NOT_AVAILABLE_ERROR errors while parsing the prologue or reading
1020 2014-01-16 Doug Evans <dje@google.com>
1022 * dwarf2read.c (open_and_init_dwp_file): Fix typo in comment.
1024 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1026 * btrace.h (btrace_thread_flag): New.
1027 (struct btrace_thread_info) <flags>: New.
1028 * record-btrace.c (record_btrace_resume_thread)
1029 (record_btrace_find_thread_to_move, btrace_step_no_history)
1030 (btrace_step_stopped, record_btrace_start_replaying)
1031 (record_btrace_step_thread, record_btrace_decr_pc_after_break)
1032 (record_btrace_find_resume_thread): New.
1033 (record_btrace_resume, record_btrace_wait): Extend.
1034 (record_btrace_can_execute_reverse): New.
1035 (record_btrace_open): Fail in non-stop mode.
1036 (record_btrace_set_replay): Split into this, ...
1037 (record_btrace_stop_replaying): ... this, ...
1038 (record_btrace_clear_histories): ... and this.
1039 (init_record_btrace_ops): Init to_can_execute_reverse.
1040 * NEWS: Announce it.
1042 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1044 * target.h (struct target_ops) <to_decr_pc_after_break>: New.
1045 (forward_target_decr_pc_after_break)
1046 (target_decr_pc_after_break): New.
1047 * target.c (forward_target_decr_pc_after_break)
1048 (target_decr_pc_after_break): New.
1049 * aix-thread.c (aix_thread_wait): Call target_decr_pc_after_break
1050 instead of gdbarch_decr_pc_after_break.
1051 * darwin-nat.c (cancel_breakpoint): Call target_decr_pc_after_break
1052 instead of gdbarch_decr_pc_after_break.
1053 * infrun.c (adjust_pc_after_break): Call target_decr_pc_after_break
1054 instead of gdbarch_decr_pc_after_break.
1055 * linux-nat.c (cancel_breakpoint): Call target_decr_pc_after_break
1056 instead of gdbarch_decr_pc_after_break.
1057 * linux-thread-db.c (check_event): Call target_decr_pc_after_break
1058 instead of gdbarch_decr_pc_after_break.
1059 * record-full.c (record_full_wait_1): Call target_decr_pc_after_break
1060 instead of gdbarch_decr_pc_after_break.
1062 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1064 * btrace.c: Include regcache.h.
1065 (btrace_add_pc): New.
1066 (btrace_enable): Call btrace_add_pc.
1067 (btrace_is_empty): New.
1068 * btrace.h (btrace_is_empty): New.
1069 * record-btrace.c (require_btrace, record_btrace_info): Call
1072 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1074 * common/linux-btrace.c (perf_event_read_bts, linux_read_btrace):
1075 Support delta reads.
1076 (linux_disable_btrace): Change return type.
1077 * common/linux-btrace.h (linux_read_btrace): Change parameters
1078 and return type to allow error reporting. Update users.
1079 (linux_disable_btrace): Change return type. Update users.
1080 * common/btrace-common.h (btrace_read_type) <BTRACE_READ_DELTA>:
1082 (btrace_error): New.
1083 (btrace_block) <begin>: Comment on BEGIN == 0.
1084 * btrace.c (btrace_compute_ftrace): Start from the end of
1086 (btrace_stitch_trace, btrace_clear_history): New.
1087 (btrace_fetch): Read delta trace, return if replaying.
1088 (btrace_clear): Move clear history code to btrace_clear_history.
1089 (parse_xml_btrace): Throw an error if parsing failed.
1090 * target.h (struct target_ops) <to_read_btrace>: Change parameters
1091 and return type to allow error reporting.
1092 (target_read_btrace): Change parameters and return type to allow
1094 * target.c (target_read_btrace): Update.
1095 * remote.c (remote_read_btrace): Support delta reads. Pass
1097 * NEWS: Announce it.
1099 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1101 * record.h (record_btrace_frame_unwind)
1102 (record_btrace_tailcall_frame_unwind): New declarations.
1103 * dwarf2-frame: Include record.h
1104 (dwarf2_frame_cfa): Throw an error for btrace frames.
1105 * record-btrace.c: Include hashtab.h.
1106 (btrace_get_bfun_name): New.
1107 (btrace_call_history): Call btrace_get_bfun_name.
1108 (struct btrace_frame_cache): New.
1110 (bfcache_hash, bfcache_eq, bfcache_new): New.
1111 (btrace_get_frame_function): New.
1112 (record_btrace_frame_unwind_stop_reason): Allow unwinding.
1113 (record_btrace_frame_this_id): Compute own id.
1114 (record_btrace_frame_prev_register): Provide PC, throw_error
1115 for all other registers.
1116 (record_btrace_frame_sniffer): Detect btrace frames.
1117 (record_btrace_tailcall_frame_sniffer): New.
1118 (record_btrace_frame_dealloc_cache): New.
1119 (record_btrace_frame_unwind): Add new functions.
1120 (record_btrace_tailcall_frame_unwind): New.
1121 (_initialize_record_btrace): Allocate cache.
1122 * btrace.c (btrace_clear): Call reinit_frame_cache.
1123 * NEWS: Announce it.
1125 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1127 * record-btrace.c (record_btrace_set_replay)
1128 (record_btrace_goto_begin, record_btrace_goto_end)
1129 (record_btrace_goto): New.
1130 (init_record_btrace_ops): Initialize them.
1131 * NEWS: Announce it.
1133 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1135 * record-btrace.c (record_btrace_find_new_threads)
1136 (record_btrace_thread_alive): New.
1137 (init_record_btrace_ops): Initialize to_find_new_threads and
1140 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1142 * record-btrace.c (record_btrace_resume): New.
1143 (record_btrace_wait): New.
1144 (init_record_btrace_ops): Initialize to_wait and to_resume.
1146 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1148 * record-btrace.c (record_btrace_xfer_partial)
1149 (record_btrace_insert_breakpoint, record_btrace_remove_breakpoint)
1150 (record_btrace_allow_memory_access): New.
1151 (init_record_btrace_ops): Initialize new methods.
1152 * target.c (raw_memory_xfer_partial): Bail out if target reports
1153 that this memory is not available.
1155 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1157 * target.h (target_ops) <to_insert_breakpoint>
1158 <to_remove_breakpoint>: Add target_ops parameter.
1159 (forward_target_insert_breakpoint): New.
1160 (forward_target_remove_breakpoint): New.
1161 (memory_remove_breakpoint, memory_insert_breakpoint):
1162 Add target_ops parameter.
1163 * target.c (target_insert_breakpoint): Split into this and ...
1164 (forward_target_insert_breakpoint): ... this.
1165 (target_remove_breakpoint): Split into this and ...
1166 (forward_target_remove_breakpoint): ... this.
1167 (debug_to_insert_breakpoint): Add target_ops parameter.
1168 Call forward_target_insert_breakpoint.
1169 (debug_to_remove_breakpoint): Add target_ops parameter.
1170 Call forward_target_remove_breakpoint.
1171 (update_current_target): Do not inherit or default to_insert_breakpoint
1172 and to_remove_breakpoint.
1173 * corelow.c (ignore): Add target_ops parameter.
1174 * exec.c (ignore): Add target_ops parameter.
1175 * mem-break.c (memory_insert_breakpoint, memory_remove_breakpoint):
1176 Add target_ops parameter.
1177 * monitor.c (monitor_insert_breakpoint, monitor_remove_breakpoint):
1178 Add target_ops parameter.
1179 * nto-procfs.c (procfs_insert_breakpoint, procfs_remove_breakpoint):
1180 Add target_ops parameter.
1181 * record-full.c (record_full_beneath_to_insert_breakpoint)
1182 (record_full_beneath_to_remove_breakpoint, tmp_to_insert_breakpoint)
1183 (tmp_to_remove_breakpoint, record_full_insert_breakpoint)
1184 (record_full_remove_breakpoint, record_full_core_insert_breakpoint)
1185 (record_full_core_remove_breakpoint): Add target_ops parameter.
1187 (record_full_beneath_to_insert_breakpoint_ops)
1188 (record_full_beneath_to_remove_breakpoint_ops)
1189 (tmp_to_insert_breakpoint_ops, tmp_to_remove_breakpoint_ops): New.
1190 (record_full_open): Initialize tmp_to_insert_breakpoint_ops,
1191 tmp_to_remove_breakpoint_ops,
1192 record_full_beneath_to_insert_breakpoint_ops, and
1193 record_full_beneath_to_remove_breakpoint_ops.
1194 * remote-m32r-sdi.c (m32r_insert_breakpoint)
1195 (m32r_remove_breakpoint): Add target_ops parameter.
1196 * remote-mips.c (mips_insert_breakpoint, mips_remove_breakpoint):
1197 Add target_ops parameter.
1198 * remote.c (remote_insert_breakpoint, remote_remove_breakpoint):
1199 Add target_ops parameter.
1201 2014-01-16 Jan Kratochvil <jan.kratochvil@redhat.com>
1202 Markus Metzger <markus.t.metzger@intel.com>
1204 * record-btrace.c: Include frame-unwind.h.
1205 (record_btrace_frame_unwind_stop_reason)
1206 (record_btrace_frame_this_id, record_btrace_frame_prev_register)
1207 (record_btrace_frame_sniffer, record_btrace_frame_unwind):
1209 (init_record_btrace_ops): Install it.
1211 2014-01-16 Jan Kratochvil <jan.kratochvil@redhat.com>
1213 * frame.c (get_frame_unwind_stop_reason): Unconditionally call
1216 2014-01-16 Jan Kratochvil <jan.kratochvil@redhat.com>
1218 * dwarf2-frame.c (dwarf2_frame_cfa): Move UNWIND_UNAVAILABLE check
1221 2014-01-16 Jan Kratochvil <jan.kratochvil@redhat.com>
1223 * frame-unwind.c: Include target.h.
1224 (frame_unwind_try_unwinder): New function with code from ...
1225 (frame_unwind_find_by_frame): ... here. New variable
1226 unwinder_from_target, call also target_get_unwinder)
1227 (target_get_tailcall_unwinder, and frame_unwind_try_unwinder for it.
1228 * target.c (target_get_unwinder, target_get_tailcall_unwinder): New.
1229 * target.h (struct target_ops): New fields to_get_unwinder and
1230 to_get_tailcall_unwinder.
1231 (target_get_unwinder, target_get_tailcall_unwinder): New declarations.
1233 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1235 * record-btrace.c (record_btrace_fetch_registers)
1236 (record_btrace_store_registers)
1237 (record_btrace_to_prepare_to_store): New.
1238 (init_record_btrace_ops): Add the above.
1240 2014-01-16 Tom Tromey <tromey@redhat.com>
1242 * windows-nat.c (windows_prepare_to_store): Add 'self' argument.
1243 * target.h (struct target_ops) <to_prepare_to_store>: Add
1245 (target_prepare_to_store): Add argument.
1246 * target.c (debug_to_prepare_to_store): Add argument.
1247 (update_current_target): Update.
1248 * remote.c (remote_prepare_to_store): Add 'self' argument.
1249 * remote-sim.c (gdbsim_prepare_to_store): Add 'self' argument.
1250 * remote-mips.c (mips_prepare_to_store): Add 'self' argument.
1251 * remote-m32r-sdi.c (m32r_prepare_to_store): Add 'self' argument.
1252 * record-full.c (record_full_core_prepare_to_store): Add 'self'
1254 * ravenscar-thread.c (ravenscar_prepare_to_store): Add argument.
1255 * nto-procfs.c (procfs_prepare_to_store): Add 'self' argument.
1256 * monitor.c (monitor_prepare_to_store): Add 'self' argument.
1257 * inf-child.c (inf_child_prepare_to_store): Add 'self' argument.
1258 * go32-nat.c (go32_prepare_to_store): Add 'self' argument.
1260 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1262 * btrace.h (replay) <replay>: New.
1263 (btrace_is_replaying): New.
1264 * btrace.c (btrace_clear): Free replay iterator.
1265 (btrace_is_replaying): New.
1266 * record-btrace.c (record_btrace_is_replaying): New.
1267 (record_btrace_info): Print insn number if replaying.
1268 (record_btrace_insn_history): Start at replay position.
1269 (record_btrace_call_history): Start at replay position.
1270 (init_record_btrace_ops): Init to_record_is_replaying.
1272 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1274 * record-btrace.c (record_btrace_insn_history_range): Include
1276 (record_btrace_insn_history_from): Adjust range.
1277 (record_btrace_call_history_range): Include
1279 (record_btrace_call_history_from): Adjust range.
1280 * NEWS: Announce changes.
1282 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1284 * record.h (enum record_print_flag)
1285 <record_print_indent_calls>: New.
1286 * record.c (get_call_history_modifiers): Recognize /c modifier.
1287 (_initialize_record): Document /c modifier.
1288 * record-btrace.c (btrace_call_history): Add btinfo parameter.
1289 Reorder fields. Optionally indent the function name. Update
1291 * NEWS: Announce changes.
1293 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1295 * common/linux-btrace.c (linux_enable_btrace): Enlarge buffer.
1297 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1299 * btrace.c (ftrace_new_function): Start counting at one.
1300 * record-btrace.c (record_btrace_info): Adjust number of calls
1302 * NEWS: Announce it.
1304 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1306 * record-btrace.c (btrace_call_history_insn_range): Print
1307 insn range as [begin, end].
1309 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1311 * btrace.h (struct btrace_func_link): New.
1312 (enum btrace_function_flag): New.
1313 (struct btrace_inst): Rename to ...
1314 (struct btrace_insn): ...this. Update all users.
1315 (struct btrace_func) <ibegin, iend>: Remove.
1316 (struct btrace_func_link): New.
1317 (struct btrace_func): Rename to ...
1318 (struct btrace_function): ...this. Update all users.
1319 (struct btrace_function) <segment, flow, up, insn, insn_offset)
1320 (number, level, flags>: New.
1321 (struct btrace_insn_iterator): Rename to ...
1322 (struct btrace_insn_history): ...this.
1324 (struct btrace_insn_iterator, btrace_call_iterator): New.
1325 (struct btrace_target_info) <btrace, itrace, ftrace>: Remove.
1326 (struct btrace_target_info) <begin, end, level>
1327 <insn_history, call_history>: New.
1328 (btrace_insn_get, btrace_insn_number, btrace_insn_begin)
1329 (btrace_insn_end, btrace_insn_prev, btrace_insn_next)
1330 (btrace_insn_cmp, btrace_find_insn_by_number, btrace_call_get)
1331 (btrace_call_number, btrace_call_begin, btrace_call_end)
1332 (btrace_call_prev, btrace_call_next, btrace_call_cmp)
1333 (btrace_find_function_by_number, btrace_set_insn_history)
1334 (btrace_set_call_history): New.
1335 * btrace.c (btrace_init_insn_iterator)
1336 (btrace_init_func_iterator, compute_itrace): Remove.
1337 (ftrace_print_function_name, ftrace_print_filename)
1338 (ftrace_skip_file): Change
1340 (ftrace_init_func): Remove.
1341 (ftrace_debug): Use new btrace_function fields.
1342 (ftrace_function_switched): Also consider gaining and
1343 losing symbol information).
1344 (ftrace_print_insn_addr, ftrace_new_call, ftrace_new_return)
1345 (ftrace_new_switch, ftrace_find_caller, ftrace_new_function)
1346 (ftrace_update_caller, ftrace_fixup_caller, ftrace_new_tailcall):
1348 (ftrace_new_function): Move. Remove debug print.
1349 (ftrace_update_lines, ftrace_update_insns): New.
1350 (ftrace_update_function): Check for call, ret, and jump.
1351 (compute_ftrace): Renamed to ...
1352 (btrace_compute_ftrace): ...this. Rewritten to compute call
1354 (btrace_fetch, btrace_clear): Updated.
1355 (btrace_insn_get, btrace_insn_number, btrace_insn_begin)
1356 (btrace_insn_end, btrace_insn_prev, btrace_insn_next)
1357 (btrace_insn_cmp, btrace_find_insn_by_number, btrace_call_get)
1358 (btrace_call_number, btrace_call_begin, btrace_call_end)
1359 (btrace_call_prev, btrace_call_next, btrace_call_cmp)
1360 (btrace_find_function_by_number, btrace_set_insn_history)
1361 (btrace_set_call_history): New.
1362 * record-btrace.c (require_btrace): Use new btrace thread
1364 (record_btrace_info, btrace_insn_history)
1365 (record_btrace_insn_history, record_btrace_insn_history_range):
1366 Use new btrace thread info fields and new iterator.
1367 (btrace_func_history_src_line): Rename to ...
1368 (btrace_call_history_src_line): ...this. Use new btrace
1370 (btrace_func_history): Rename to ...
1371 (btrace_call_history): ...this. Use new btrace thread info
1372 fields and new iterator.
1373 (record_btrace_call_history, record_btrace_call_history_range):
1374 Use new btrace thread info fields and new iterator.
1376 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1378 * frame.h (frame_id_build_unavailable_stack_special): New.
1379 * frame.c (frame_id_build_unavailable_stack_special): New.
1381 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1383 * amd64-tdep.c (amd64_classify_insn_at, amd64_insn_is_call)
1384 (amd64_insn_is_ret, amd64_insn_is_jump, amd64_jmp_p): New.
1385 (amd64_init_abi): Add insn_is_call, insn_is_ret, and insn_is_jump
1387 * i386-tdep.c (i386_insn_is_call, i386_insn_is_ret)
1388 (i386_insn_is_jump, i386_jmp_p): New.
1389 (i386_gdbarch_init): Add insn_is_call, insn_is_ret, and
1390 insn_is_jump to gdbarch.
1391 * gdbarch.sh (insn_is_call, insn_is_ret, insn_is_jump): New.
1392 * gdbarch.h: Regenerated.
1393 * gdbarch.c: Regenerated.
1394 * arch-utils.h (default_insn_is_call, default_insn_is_ret)
1395 (default_insn_is_jump): New.
1396 * arch-utils.c (default_insn_is_call, default_insn_is_ret)
1397 (default_insn_is_jump): New.
1399 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1401 * common/btrace-common.h (btrace_read_type) <btrace_read_all>:
1403 (btrace_read_type) <BTRACE_READ_ALL>: ... this. Update users.
1404 (btrace_read_type) <btrace_read_new>: Change to ...
1405 (btrace_read_type) <BTRACE_READ_NEW>: ... this. Update users.
1407 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1409 * common/linux-btrace.c (linux_read_btrace): Free trace from
1412 2014-01-15 Doug Evans <dje@google.com>
1414 * dwarf2read.c (open_and_init_dwp_file): Use pulongest to print
1417 2014-01-15 Tom Tromey <tromey@redhat.com>
1419 * dbxread.c (process_one_symbol): Use set_objfile_main_name.
1420 * dwarf2read.c (read_partial_die): Use set_objfile_main_name.
1421 * objfiles.c (get_objfile_bfd_data): Initialize language_of_main.
1422 (set_objfile_main_name): New function.
1423 * objfiles.h (struct objfile_per_bfd_storage) <name_of_main,
1424 language_of_main>: New fields.
1425 (set_objfile_main_name): Declare.
1426 * symtab.c (find_main_name): Loop over objfiles to find the main
1428 (set_main_name): Now static.
1429 (get_main_info): Add comment.
1430 * symtab.h (set_main_name): Don't declare.
1432 2014-01-15 Tom Tromey <tromey@redhat.com>
1434 * symtab.c (main_progspace_key): New global.
1435 (struct main_info): New.
1436 (name_of_main, language_of_main): Remove.
1437 (get_main_info, main_info_cleanup): New function.
1438 (set_main_name, main_name, main_language): Use get_main_info.
1439 (_initialize_symtab): Initialize main_progspace_key.
1441 2014-01-15 Tom Tromey <tromey@redhat.com>
1443 * dbxread.c (process_one_symbol): Update.
1444 * dwarf2read.c (read_partial_die): Update.
1445 * symfile.c (set_initial_language): Call main_language.
1446 * symtab.c (language_of_main): Now static.
1447 (set_main_name): Add 'lang' parameter.
1448 (find_main_name): Update.
1449 (main_language): New function.
1450 (symtab_observer_executable_changed): Update.
1451 * symtab.h (set_main_name): Update.
1452 (language_of_main): Remove.
1453 (main_language): Declare.
1455 2014-01-15 Tom Tromey <tromey@redhat.com>
1457 * symfile.c (init_entry_point_info): Use new "initialized" field.
1459 * objfiles.h (struct entry_point) <initialized>: New field.
1460 (struct objfile_per_bfd_storage) <ei>: New field, moved from...
1461 (struct objfile) <ei>: ...here. Remove.
1462 * objfiles.c (entry_point_address_query): Update.
1464 2014-01-15 Tom Tromey <tromey@redhat.com>
1466 * objfiles.c (entry_point_address_query): Relocate entry point
1468 (objfile_relocate1): Do not relocate entry point address.
1469 * objfiles.h (struct entry_info) <entry_point>: Update comment.
1470 <the_bfd_section_index>: New field.
1471 * symfile.c (init_entry_point_info): Find the entry point's
1474 2014-01-15 Tom Tromey <tromey@redhat.com>
1476 * solib-frv.c (enable_break): Use entry_point_address_query.
1478 2014-01-15 Omair Javaid <omair.javaid@linaro.org>
1480 * NEWS: Add note on improved process record-replay on
1481 arm*-linux* targets.
1483 2014-01-15 Omair Javaid <omair.javaid@linaro.org>
1485 * arm-tdep.c (enum arm_record_result): New enum.
1486 (arm_record_unsupported_insn): New function.
1487 (arm_record_coproc_data_proc): Removed.
1488 (thumb2_record_ld_st_multiple): New function.
1489 (thumb2_record_ld_st_dual_ex_tbb): New function.
1490 (thumb2_record_data_proc_sreg_mimm): New function.
1491 (thumb2_record_ps_dest_generic): New function.
1492 (thumb2_record_branch_misc_cntrl): New function.
1493 (thumb2_record_str_single_data): New function.
1494 (thumb2_record_ld_mem_hints): New function.
1495 (thumb2_record_ld_word): New function.
1496 (thumb2_record_lmul_lmla_div): New function.
1497 (thumb2_record_decode_insn_handler): New function.
1498 (decode_insn): Add thumb32 instruction handlers.
1500 2014-01-15 Omair Javaid <omair.javaid@linaro.org>
1502 * arm-linux-tdep.c: Include "record-full.h" and "linux-record.h".
1503 (struct arm_linux_record_tdep): Declare.
1504 (arm_canonicalize_syscall): New function.
1505 (arm_all_but_pc_registers_record): New function.
1506 (arm_linux_syscall_record): New function.
1507 (arm_linux_init_abi): Add syscall recording constructs.
1508 * arm-tdep.c (thumb_record_ldm_stm_swi): Update thumb syscall
1509 decoding. (arm_record_coproc_data_proc): Update arm syscall
1511 * arm-tdep.h (struct gdbarch_tdep) <arm_swi_record>: Remove.
1512 <arm_syscall_record>: New field.
1513 * configure.tgt (arm*-*-linux*): Add linux-record.o to
1516 2014-01-15 Omair Javaid <omair.javaid@linaro.org>
1518 * arm-tdep.c (thumb_record_misc): Update to use sp as base
1519 register for push instruction recording.
1521 2014-01-15 Omair Javaid <omair.javaid@linaro.org>
1523 * arm-tdep.c (thumb_record_misc): Update to correct logical
1524 error while recording ldm, ldmia and pop instructions.
1526 2014-01-15 Omair Javaid <omair.javaid@linaro.org>
1528 * arm-tdep.c (struct arm_mem_r) <addr>: Change type to uint32_t.
1530 2014-01-15 Pedro Alves <palves@redhat.com>
1532 * go32-nat.c (go32_open, go32_close, go32_attach, go32_detach)
1533 (go32_resume, go32_fetch_registers, store_register)
1534 (go32_store_registers, go32_prepare_to_store)
1535 (go32_xfer_memory, go32_files_info, go32_kill_inferior)
1536 (go32_create_inferior, go32_can_run, go32_terminal_init)
1537 (go32_terminal_inferior, go32_terminal_ours): Delete forward
1540 2014-01-15 Tom Tromey <tromey@redhat.com>
1542 * target.h (async_callback_ftype): New typedef.
1543 (struct target_ops) <to_async>: Use it.
1545 2014-01-15 Joel Brobecker <brobecker@adacore.com>
1547 * python/py-value.c (get_field_type): Remove unnecessary curly
1548 braces for single-statement if block.
1550 2014-01-15 Joel Brobecker <brobecker@adacore.com>
1552 * python/py-type.c (convert_field): Add missing empty line
1555 2014-01-14 Doug Evans <dje@google.com>
1557 * symfile.h (expand_symtabs_matching): Renamed from
1558 expand_partial_symbol_names. Update prototype.
1559 (map_symbol_filenames): Renamed from map_partial_symbol_filenames.
1560 * symfile.c (expand_symtabs_matching): Renamed from
1561 expand_partial_symbol_names. New args file_matcher, kind.
1562 Rename arg fun to symbol_matcher.
1563 (map_symbol_filenames): Renamed from map_partial_symbol_filenames.
1564 * ada-lang.c (ada_complete_symbol_matcher): Renamed from
1565 ada_expand_partial_symbol_name.
1566 (ada_make_symbol_completion_list): Update to call
1567 expand_symtabs_matching.
1568 (ada_add_global_exceptions): Call expand_symtabs_matching.
1569 * mi/mi-cmd-file.c (mi_cmd_file_list_exec_source_files): Update to
1570 call map_symbol_filenames.
1571 * symtab.c (sources_info): Update to call map_symbol_filenames.
1572 (search_symbols): Call expand_symtabs_matching.
1573 (symbol_completion_matcher): Renamed from expand_partial_symbol_name.
1574 (default_make_symbol_completion_list_break_on): Update to call
1575 expand_symtabs_matching.
1576 (make_source_files_completion_list): Update to call
1577 map_symbol_filenames.
1579 2014-01-14 Doug Evans <dje@google.com>
1581 * symfile.h (expand_symtabs_file_matcher_ftype): New typedef.
1582 (expand_symtabs_symbol_matcher_ftype): New typedef.
1583 (quick_symbol_functions.expand_symtabs_matching): Update to use.
1584 expand_symtabs_file_matcher_ftype, expand_symtabs_symbol_matcher_ftype.
1585 * symfile.c (expand_partial_symbol_names): Update to use
1586 expand_symtabs_symbol_matcher_ftype.
1587 * dwarf2read.c (dw2_expand_symtabs_matching): Update to use
1588 expand_symtabs_file_matcher_ftype, expand_symtabs_symbol_matcher_ftype.
1589 Arg name_matcher renamed to symbol_matcher.
1590 * psymtab.c (recursively_search_psymtabs): Update to use
1591 expand_symtabs_symbol_matcher_ftype. Arg name_matcher renamed to
1593 (expand_symtabs_matching_via_partial): Update to use
1594 expand_symtabs_file_matcher_ftype, expand_symtabs_symbol_matcher_ftype.
1595 Arg name_matcher renamed to symbol_matcher.
1597 2014-01-14 Doug Evans <dje@google.com>
1599 * psymtab.c (expand_partial_symbol_names): Delete, moved to symfile.c.
1600 (map_partial_symbol_filenames): Ditto.
1601 * psymtab.h (expand_partial_symbol_names): Delete, moved to symfile.h.
1602 (map_partial_symbol_filenames): Ditto.
1603 * symfile.c (expand_partial_symbol_names): Moved here from psymtab.c.
1604 (map_partial_symbol_filenames): Ditto.
1605 * symfile.h (expand_partial_symbol_names): Moved here from psymtab.h.
1606 (map_partial_symbol_filenames): Ditto.
1607 * symtab.c: Delete #include "psymtab.h".
1609 2014-01-14 Pedro Alves <palves@redhat.com>
1610 Tom Tromey <tromey@redhat.com>
1612 * infrun.c (use_displaced_stepping): Use find_record_target
1613 instead of RECORD_IS_USED.
1614 (adjust_pc_after_break): Use record_full_is_used instead of
1616 * record-btrace.c (record_btrace_open): Call record_preopen
1617 instead of checking RECORD_IS_USED.
1618 * record-full.c (record_full_shortname)
1619 (record_full_core_shortname): New globals.
1620 (record_full_is_used): New function.
1621 (find_full_open): Call record_preopen instead of checking
1623 (init_record_full_ops): Set the target's shortname to
1624 record_full_shortname.
1625 (init_record_full_core_ops): Set the target's shortname to
1626 record_full_core_shortname.
1627 * record-full.h (record_full_is_used): Declare.
1628 * record.c (find_record_target): Make extern.
1629 (record_preopen): New function.
1630 * record.h (RECORD_IS_USED): Delete macro.
1631 (find_record_target, record_preopen): Declare functions.
1633 2014-01-14 Yao Qi <yao@codesourcery.com>
1635 * gdbarch.sh (core_xfer_shared_libraries): Change its argument
1636 'len''s type to ULONGEST.
1637 (core_xfer_shared_libraries_aix): Likewise.
1638 * gdbarch.c, gdbarch.h: Regenerated.
1639 * i386-cygwin-tdep.c (windows_core_xfer_shared_libraries):
1640 Change type of 'len' to ULONGEST.
1641 * rs6000-aix-tdep.c (rs6000_aix_ld_info_to_xml): Likewise.
1642 (rs6000_aix_core_xfer_shared_libraries_aix): Likewise.
1644 2014-01-14 Yao Qi <yao@codesourcery.com>
1646 * common/linux-osdata.c (linux_xfer_osdata_processes): Change
1647 type of 'len' to ULONGEST.
1648 (linux_xfer_osdata_processgroups): Likewise.
1649 (linux_xfer_osdata_threads): Likewise.
1650 (linux_xfer_osdata_fds): Likewise.
1651 (linux_xfer_osdata_isockets): Likewise.
1652 (linux_xfer_osdata_shm): Likewise.
1653 (linux_xfer_osdata_sem): Likewise.
1654 (linux_xfer_osdata_msg): Likewise.
1655 (linux_common_xfer_osdata): Likewise.
1656 (struct osdata_type) <getter>: Likewise.
1657 * common/linux-osdata.h (linux_common_xfer_osdata): Update
1660 2014-01-14 Yao Qi <yao@codesourcery.com>
1662 * target.h (target_xfer_partial_ftype): Update.
1663 (struct target_ops) <to_xfer_partial>: Change 'len' type to
1665 * aix-thread.c (aix_thread_xfer_partial): Change type of
1666 argument 'len' to ULONGEST.
1667 * auxv.c (procfs_xfer_auxv): Likewise.
1668 (ld_so_xfer_auxv): Likewise.
1669 (memory_xfer_auxv): Likewise.
1670 * bfd-target.c (target_bfd_xfer_partial): Likewise.
1671 * bsd-kvm.c (bsd_kvm_xfer_partial): Likewise.
1672 * bsd-uthread.c (bsd_uthread_xfer_partial): Likewise.
1673 * corelow.c (core_xfer_partial): Likewise.
1674 * ctf.c (ctf_xfer_partial): Likewise.
1675 * darwin-nat.c (darwin_read_write_inferior): Likewise. Use
1677 (darwin_read_dyld_info): Likewise.
1678 (darwin_xfer_partial): Likewise.
1679 * exec.c (section_table_xfer_memory_partial): Likewise.
1680 (exec_xfer_partial): Likewise.
1681 * exec.h (section_table_xfer_memory_partial): Update
1683 * gnu-nat.c (gnu_xfer_memory): Likewise. Call pulongest
1684 instead of plongest.
1685 (gnu_xfer_partial): Likewise.
1686 * ia64-hpux-nat.c (ia64_hpux_xfer_memory): Likewise.
1687 (ia64_hpux_xfer_solib_got): Likewise.
1688 (ia64_hpux_xfer_partial): Likewise.
1689 * ia64-linux-nat.c (ia64_linux_xfer_partial):
1690 * inf-ptrace.c (inf_ptrace_xfer_partial):
1691 * inf-ttrace.c (inf_ttrace_xfer_partial):
1692 * linux-nat.c (linux_xfer_siginfo): Likewise.
1693 (linux_nat_xfer_partial): Likewise.
1694 (spu_enumerate_spu_ids, linux_proc_xfer_spu): Likewise.
1695 (linux_nat_xfer_osdata, linux_xfer_partial): Likewise.
1696 * monitor.c (monitor_xfer_memory): Likewise.
1697 (monitor_xfer_partial): Likewise.
1698 * procfs.c (procfs_xfer_partial): Likewise.
1699 * record-full.c (record_full_xfer_partial): Likewise.
1700 (record_full_core_xfer_partial): Likewise.
1701 * remote-sim.c (gdbsim_xfer_memory): Likewise. Call pulongest
1702 instead of plongest.
1703 (gdbsim_xfer_partial): Likewise.
1704 * remote.c (remote_xfer_partial): Likewise.
1705 * rs6000-aix-tdep.c (rs6000_aix_ld_info_to_xml): Likewise.
1706 * rs6000-aix-tdep.h (rs6000_aix_ld_info_to_xml): Update
1708 * rs6000-nat.c (rs6000_xfer_partial): Likewise.
1709 (rs6000_xfer_shared_libraries): Likewise.
1710 * sol-thread.c (sol_thread_xfer_partial): Likewise.
1711 * sparc-nat.c (sparc_xfer_wcookie): Likewise.
1712 (sparc_xfer_partial): Likewise.
1713 * spu-linux-nat.c (spu_proc_xfer_spu): Likewise.
1714 (spu_xfer_partial): Likewise.
1715 * spu-multiarch.c (spu_xfer_partial): Likewise.
1716 * target.c (target_read_live_memory): Likewise.
1717 (memory_xfer_live_readonly_partial): Likewise.
1718 (memory_xfer_partial, memory_xfer_partial_1): Likewise.
1719 (target_xfer_partial, default_xfer_partial): Likewise.
1720 (current_xfer_partial): Likewise.
1721 * tracepoint.c (tfile_xfer_partial): Likewise.
1722 * windows-nat.c (windows_xfer_memory): Likewise. Call
1723 pulongest instead of plongest.
1724 (windows_xfer_partial): Likewise.
1725 (windows_xfer_shared_libraries): Likewise.
1727 2014-01-14 Yao Qi <yao@codesourcery.com>
1729 * rs6000-nat.c (rs6000_xfer_shared_libraries): Use
1730 target_xfer_partial_ftype.
1732 2014-01-13 Siva Chandra Reddy <sivachandra@google.com>
1736 * valops.c (value_struct_elt_bitpos): New function
1737 * py-type.c (convert_field): Set 'name' attribute of a gdb.Field
1738 object to 'None' if the field name is an empty string ("").
1739 * python/py-value.c (valpy_getitem): Use 'bitpos' and 'type'
1740 attribute to look for a field when 'name' is 'None'.
1741 (get_field_type): New function
1743 2014-01-13 Doug Evans <dje@google.com>
1746 * dwarf2read.c (dwarf2_get_dwz_file): Call gdb_bfd_record_inclusion.
1747 (try_open_dwop_file): Ditto.
1748 * gdb_bfd.c: #include "vec.h".
1749 (bfdp): New typedef.
1750 (struct gdb_bfd_data): New member included_bfds.
1751 (gdb_bfd_unref): Unref all included bfds.
1752 (gdb_bfd_record_inclusion): New function.
1753 * gdb_bfd.h (gdb_bfd_record_inclusion): Declare.
1755 2014-01-13 Tom Tromey <tromey@redhat.com>
1757 * gdbcore.h (deprecated_core_resize_section_table): Remove.
1759 2014-01-13 Tom Tromey <tromey@redhat.com>
1761 * defs.h (use_windows): Remove.
1762 * gdb.c (main): Update.
1763 * main.c (captured_main, gdb_main): Update.
1764 * main.h (struct captured_main_args) <use_windows>: Remove.
1765 * top.c (use_windows): Remove.
1767 2014-01-13 Tom Tromey <tromey@redhat.com>
1769 * defs.h (deprecated_flush_hook): Remove.
1771 2014-01-13 Jan Kratochvil <jan.kratochvil@redhat.com>
1774 * linux-thread-db.c (try_thread_db_load): Add parameter
1775 check_auto_load_safe. Move here the file_is_auto_load_safe call.
1776 (try_thread_db_load_from_pdir_1): Move it there from here.
1777 (try_thread_db_load_from_sdir): Update caller.
1778 (try_thread_db_load_from_dir): Move it there from here.
1780 2014-01-13 Patrick Palka <patrick@parcs.ath.cx>
1782 * regformats/regdat.sh: Always rewrite the register file.
1784 2014-01-13 Pedro Alves <palves@redhat.com>
1786 * Makefile.in (CHECK_HEADERS): New variable.
1787 (check-headers:): New rule.
1789 2014-01-13 Tom Tromey <tromey@redhat.com>
1791 * cli/cli-setshow.c (do_set_command): Update.
1792 * defs.h (deprecated_set_hook): Remove.
1793 * top.c (deprecated_set_hook): Remove.
1795 2014-01-13 Pedro Alves <palves@redhat.com>
1797 * tracepoint.c (tfile_fetch_registers): Don't infer the PC from
1798 the tracepoint if the PC is a pseudo-register.
1800 2014-01-13 Tom Tromey <tromey@redhat.com>
1802 * defs.h (XCALLOC): Remove.
1803 * bcache.c (bcache_xmalloc): Use XCNEW, not XCALLOC.
1804 (print_bcache_statistics): Use XCNEWVEC, not XCALLOC.
1805 * dwarf2loc.c (allocate_piece_closure): Likewise.
1806 * elfread.c (elf_symfile_segments): Likewise.
1807 (elf_symfile_segments): Likewise.
1808 * gdbtypes.c (copy_type_recursive): Likewise.
1809 * i386-tdep.c (i386_gdbarch_init): Use XCNEW, not XCALLOC.
1810 * jit.c (jit_frame_sniffer): Use XCNEWVEC, not XCALLOC.
1811 * minsyms.c (prim_record_minimal_symbol_full): Use XCNEW, not
1813 * mt-tdep.c (mt_gdbarch_init): Likewise.
1814 * opencl-lang.c (allocate_lval_closure): Use XCNEWVEC, not
1816 * psymtab.c (psymbol_compare): Use XCNEW, not XCALLOC.
1817 * regcache.c (regcache_xmalloc_1): Use XCNEWVEC, not XCALLOC.
1818 * registry.c (registry_alloc_data): Likewise.
1819 * rs6000-tdep.c (rs6000_gdbarch_init): Use XCNEW, not XCALLOC.
1820 * s390-linux-tdep.c (s390_gdbarch_init): Likewise.
1821 * serial.c (serial_fdopen_ops): Likewise.
1822 * solib-aix.c (solib_aix_get_section_offsets): Use XCNEWVEC, not
1824 * spu-tdep.c (spu_gdbarch_init): Use XCNEW, not XCALLOC.
1825 * symfile.c (default_symfile_segments): Use XCNEW and XCNEWVEC,
1828 2014-01-13 Tom Tromey <tromey@redhat.com>
1830 * defs.h (XMALLOC): Remove.
1831 * avr-tdep.c (avr_gdbarch_init): Use XNEW, not XMALLOC.
1832 * bfin-tdep.c (bfin_gdbarch_init): Likewise.
1833 * cli-out.c (struct ui_out *): Likewise.
1834 * cli/cli-dump.c (add_dump_command): Likewise.
1835 (add_dump_command): Likewise.
1836 * complaints.c (get_complaints): Likewise.
1837 (find_complaint): Likewise.
1838 * dwarf2-frame.c (execute_cfa_program): Likewise.
1839 * dwarf2read.c (abbrev_table_read_table): Likewise.
1840 * gdbarch.sh: Likewise.
1841 * gdbarch.c: Rebuild.
1842 * inf-ttrace.c (inf_ttrace_add_page): Likewise.
1843 * interps.c (interp_new): Likewise.
1844 * lm32-tdep.c (lm32_gdbarch_init): Likewise.
1845 * m32r-tdep.c (m32r_gdbarch_init): Likewise.
1846 * mi/mi-console.c (mi_console_file_new): Likewise.
1847 * mi/mi-interp.c (mi_interpreter_init): Likewise.
1848 * mi/mi-out.c (mi_out_new): Likewise.
1849 * mi/mi-parse.c (mi_parse): Likewise.
1850 * microblaze-tdep.c (microblaze_gdbarch_init): Likewise.
1851 * moxie-tdep.c (moxie_gdbarch_init): Likewise.
1852 * observer.c (xalloc_observer_list_node): Likewise.
1853 * regcache.c (regcache_xmalloc_1): Likewise.
1854 * reggroups.c (reggroup_new): Likewise.
1855 (_initialize_reggroup): Likewise.
1856 * registry.c (register_data_with_cleanup): Likewise.
1857 * remote.c (remote_notif_stop_alloc_reply): Likewise.
1858 * ser-base.c (serial_ttystate): Likewise.
1859 * ser-mingw.c (make_pipe_state): Likewise.
1860 * ser-pipe.c (pipe_open): Likewise.
1861 * serial.c (serial_open): Likewise.
1862 * sh64-tdep.c (sh64_gdbarch_init): Likewise.
1863 * tui/tui-data.c (tui_alloc_generic_win_info): Likewise.
1864 (tui_alloc_win_info): Likewise.
1865 (tui_add_content_elements): Likewise.
1866 * tui/tui-file.c (tui_file_new): Likewise.
1867 * tui/tui-out.c (tui_out_new): Likewise.
1868 * ui-file.c (mem_file_new): Likewise.
1869 * ui-out.c (push_level): Likewise.
1870 (make_cleanup_ui_out_end): Likewise.
1871 (append_header_to_list): Likewise.
1872 (ui_out_new): Likewise.
1873 * user-regs.c (user_reg_add_builtin): Likewise.
1875 2014-01-13 Tom Tromey <tromey@redhat.com>
1877 * defs.h (XZALLOC): Remove.
1878 * ada-lang.c (get_ada_inferior_data): Use XCNEW, not XZALLOC.
1879 * ada-tasks.c (get_ada_tasks_pspace_data): Likewise.
1880 (get_ada_tasks_inferior_data): Likewise.
1881 * auto-load.c (get_auto_load_pspace_data): Likewise.
1882 * auxv.c (get_auxv_inferior_data): Likewise.
1883 * bfd-target.c (target_bfd_reopen): Likewise.
1884 * breakpoint.c (get_catch_syscall_inferior_data): Likewise.
1885 (deprecated_insert_raw_breakpoint): Likewise.
1886 * bsd-uthread.c (bsd_uthread_pid_to_str): Likewise.
1887 * corelow.c (core_open): Likewise.
1888 * darwin-nat.c (darwin_check_new_threads): Likewise.
1889 (darwin_attach_pid): Likewise.
1890 * dummy-frame.c (dummy_frame_push): Likewise.
1891 * dwarf2-frame.c (dwarf2_frame_cache): Likewise.
1892 * dwarf2loc.c (allocate_piece_closure): Likewise.
1893 * elfread.c (elf_symfile_segments): Likewise.
1894 * eval.c (ptrmath_type_p): Likewise.
1895 * exceptions.c (EXCEPTIONS_SIGJMP_BUF): Likewise.
1896 * gdbtypes.c (alloc_type_arch): Likewise.
1897 (alloc_type_instance): Likewise.
1898 * hppa-tdep.c (hppa_gdbarch_init): Likewise.
1899 * inf-child.c (inf_child_can_use_agent): Likewise.
1900 * inflow.c (get_inflow_inferior_data): Likewise.
1901 * infrun.c (save_infcall_suspend_state): Likewise.
1902 * jit.c (jit_reader_load): Likewise.
1903 (get_jit_objfile_data): Likewise.
1904 (get_jit_program_space_data): Likewise.
1905 (jit_object_open_impl): Likewise.
1906 (jit_symtab_open_impl): Likewise.
1907 (jit_block_open_impl): Likewise.
1908 (jit_frame_sniffer): Likewise.
1909 * linux-fork.c (add_fork): Likewise.
1910 * maint.c (make_command_stats_cleanup): Likewise.
1911 * objfiles.c (get_objfile_pspace_data): Likewise.
1912 * opencl-lang.c (struct lval_closure): Likewise.
1913 * osdata.c (osdata_start_osdata): Likewise.
1914 * progspace.c (new_address_space): Likewise.
1915 (add_program_space): Likewise.
1916 * remote-sim.c (get_sim_inferior_data): Likewise.
1917 * sh-tdep.c (sh_gdbarch_init): Likewise.
1918 * skip.c (Ignore): Likewise.
1919 (skip_delete_command): Likewise.
1920 * solib-aix.c (get_solib_aix_inferior_data): Likewise.
1921 (library_list_start_library): Likewise.
1922 (solib_aix_current_sos): Likewise.
1923 * solib-darwin.c (get_darwin_info): Likewise.
1924 (darwin_current_sos): Likewise.
1925 * solib-dsbt.c (get_dsbt_info): Likewise.
1926 * solib-ia64-hpux.c (new_so_list): Likewise.
1927 (ia64_hpux_get_solib_linkage_addr): Likewise.
1928 * solib-spu.c (append_ocl_sos): Likewise.
1929 (spu_current_sos): Likewise.
1930 * solib-svr4.c (get_svr4_info): Likewise.
1931 (svr4_keep_data_in_core): Likewise.
1932 (library_list_start_library): Likewise.
1933 (svr4_default_sos): Likewise.
1934 (svr4_read_so_list): Likewise.
1935 * solib-target.c (library_list_start_library): Likewise.
1936 (solib_target_current_sos): Likewise.
1937 * sparc-tdep.c (sparc32_gdbarch_init): Likewise.
1938 * symfile-debug.c (install_symfile_debug_logging): Likewise.
1939 * symfile.c (default_symfile_segments): Likewise.
1940 * target-descriptions.c (tdesc_data_init): Likewise.
1941 (tdesc_create_reg): Likewise.
1942 (struct tdesc_type *): Likewise.
1943 (tdesc_create_vector): Likewise.
1944 (tdesc_set_struct_size): Likewise.
1945 (struct tdesc_type *): Likewise.
1946 (tdesc_free_feature): Likewise.
1947 (tdesc_create_feature): Likewise.
1948 * windows-nat.c (windows_add_thread): Likewise.
1949 (windows_make_so): Likewise.
1950 * xml-support.c (gdb_xml_body_text): Likewise.
1951 (gdb_xml_create_parser_and_cleanup): Likewise.
1952 (xml_process_xincludes): Likewise.
1953 * xml-syscall.c (allocate_syscalls_info): Likewise.
1954 (syscall_create_syscall_desc): Likewise.
1956 2014-01-12 Sergio Durigan Junior <sergiodj@redhat.com>
1958 * i386-tdep.c (i386_stap_parse_special_token_triplet): New
1959 function, with code from i386_stap_parse_special_token.
1960 (i386_stap_parse_special_token_three_arg_disp): Likewise.
1961 (i386_stap_parse_special_token): Move code to the two functions
1964 2014-01-09 Pedro Alves <palves@redhat.com>
1965 Hui Zhu <hui@codesourcery.com>
1968 * breakpoint.c (insert_bp_location): Rename hw_bp_err_string to
1969 bp_err_string. Don't mark the location shlib_disabled if the
1970 error thrown wasn't a generic or memory error. Catch errors
1971 thrown while inserting breakpoints in overlayed code. Output
1972 error message of software breakpoints.
1973 * remote.c (remote_insert_breakpoint): If this breakpoint has
1974 target-side commands but this stub doesn't support Z0 packets,
1975 throw NOT_SUPPORTED_ERROR error.
1976 * exceptions.h (enum errors) <NOT_SUPPORTED_ERROR>: New error.
1977 * target.h (target_insert_breakpoint): Extend comment.
1978 (target_insert_hw_breakpoint): Add comment.
1980 2014-01-08 Pedro Alves <palves@redhat.com>
1982 * remote.c (remote_add_thread): Add threads silently if starting
1984 (remote_notice_new_inferior): If in all-stop, and starting up,
1985 don't call notice_new_inferior.
1986 (get_current_thread): New function, factored out from ...
1987 (add_current_inferior_and_thread): ... this. Adjust.
1988 (remote_start_remote) <all-stop>: Fetch the thread list. If we
1989 found any thread, then select the remote's current thread as GDB's
1992 2014-01-08 Joel Brobecker <brobecker@adacore.com>
1994 * NEWS: Create a new section for the next release branch.
1995 Rename the section of the current branch, now that it has
1998 2014-01-08 Joel Brobecker <brobecker@adacore.com>
2000 GDB 7.7 branch created (79301218fa0f074c5656db0ec8972a5ddcf91fb5):
2001 * version.in: Bump version to 7.7.50.DATE-cvs.
2003 2014-01-08 Yao Qi <yao@codesourcery.com>
2005 * spu-linux-nat.c (spu_symbol_file_add_from_memory): Change
2006 type of 'id' to gdb_byte. Cast 'id' to 'const char *'.
2007 (spu_xfer_partial): Cast 'buf' to 'const char *'.
2009 2014-01-08 Yao Qi <yao@codesourcery.com>
2011 * spu-linux-nat.c (spu_symbol_file_add_from_memory): Pass
2012 return value of bfd_get_filename to symbol_file_add_from_bfd.
2014 2014-01-08 Pierre Muller <muller@sourceware.org>
2017 * coff-pe-read.c (struct read_pe_section_data): Add index field.
2018 (add_pe_exported_sym): Use SECTION_DATA->INDEX for call
2019 to prim_record_mininal_symbol_and_info.
2020 (add_pe_forwarded_sym): Use known section number of forwarded symbol
2021 in call to prim_record_minimal_symbol_and_info.
2022 (read_pe_exported_syms): Set index field of section_data.
2024 2014-01-07 Andrew Pinski <apinski@cavium.com>
2026 * features/aarch64-core.xml (cpsr): Change to be 64bit.
2027 * features/aarch64.c: Regenerate.
2029 2014-01-07 Andreas Schwab <schwab@linux-m68k.org>
2031 * target.c (return_null): Define.
2032 (update_current_target): Use it instead of return_zero for
2033 functions that return a pointer.
2035 2014-01-07 Edjunior Barbosa Machado <emachado@linux.vnet.ibm.com>
2037 * source.c (add_path): Fix check for duplicated paths in the previously
2040 2014-01-07 Honggyu Kim <hong.gyu.kim@lge.com>
2042 * ada-lang.c: Remove duplicated include statements.
2043 * alphabsd-nat.c: Ditto.
2044 * amd64-darwin-tdep.c: Ditto.
2045 * amd64fbsd-nat.c: Ditto.
2046 * auto-load.c: Ditto.
2048 * breakpoint.c: Ditto.
2050 * fork-child.c: Ditto.
2051 * gdb_usleep.c: Ditto.
2052 * i386-darwin-tdep.c: Ditto.
2053 * i386fbsd-nat.c: Ditto.
2055 * inferior.c: Ditto.
2057 * linux-nat.c: Ditto.
2058 * linux-tdep.c: Ditto.
2059 * m68kbsd-nat.c: Ditto.
2060 * m68klinux-nat.c: Ditto.
2061 * microblaze-tdep.c: Ditto.
2062 * mips-linux-tdep.c: Ditto.
2063 * mn10300-tdep.c: Ditto.
2064 * nto-tdep.c: Ditto.
2065 * opencl-lang.c: Ditto.
2067 * printcmd.c: Ditto.
2068 * regcache.c: Ditto.
2069 * remote-m32r-sdi.c: Ditto.
2073 * tilegx-linux-nat.c: Ditto.
2074 * tilegx-tdep.c: Ditto.
2075 * tracepoint.c: Ditto.
2077 * vaxbsd-nat.c: Ditto.
2078 * windows-nat.c: Ditto.
2079 * xtensa-tdep.c: Ditto.
2081 2014-01-07 Yao Qi <yao@codesourcery.com>
2083 * spu-linux-nat.c (_initialize_spu_nat): Declare.
2085 2014-01-07 Yao Qi <yao@codesourcery.com>
2086 Joel Brobecker <brobecker@adacore.com>
2088 * aix-thread.c (pdc_read_regs): Cast parameter to uintptr_t.
2089 (pdc_write_regs): Likewise.
2090 (fetch_regs_kernel_thread): Likewise.
2091 (store_regs_kernel_thread): Likewise.
2093 2014-01-07 Joel Brobecker <brobecker@adacore.com>
2095 * ada-varobj.c (ada_varobj_adjust_for_child_access): Convert
2096 tagged type objects to their actual type.
2098 2014-01-07 Joel Brobecker <brobecker@adacore.com>
2100 * ada-valprint.c (print_field_values): Add "language" parameter.
2101 Update calls to print_field_values and print_variant_part.
2102 Pass new parameter "language" in call to val_print instead
2103 of "current_language". Replace call to ada_val_print by call
2105 (print_variant_part): Add "language" parameter.
2106 (ada_val_print_struct_union): Update call to print_field_values.
2108 2014-01-07 Joel Brobecker <brobecker@adacore.com>
2110 * ada-valprint.c (ui_memcpy): Delete.
2111 (ada_print_floating): Update documentation. Add empty line
2112 between between function documentation and implementation.
2113 Delete variable "buffer". Use ui_file_xstrdup in place of
2114 ui_file_put. Minor adjustments following this change.
2116 2014-01-07 Joel Brobecker <brobecker@adacore.com>
2118 * ada-valprint.c (ada_val_print_string): New function,
2119 extracted from ada_val_print_array.
2120 (ada_val_print_array): Replace extracted code by call
2121 to ada_val_print_string followed by a return. Move
2122 "else" branch to the function's top block.
2124 2014-01-07 Joel Brobecker <brobecker@adacore.com>
2126 * ada-valprint.c (ada_val_print_array): Move implementation
2127 down. Rename parameter "offset" and "val" into "offset_aligned"
2128 and "original_value" respectively. Add parameter "offset".
2130 2014-01-07 Joel Brobecker <brobecker@adacore.com>
2132 * ada-valprint.c (ada_val_print_ref): Rewrite by mostly
2133 re-organizing the code. Change the "???" message printed
2134 when target type is a TYPE_CODE_UNDEF into
2135 "<ref to undefined type>".
2137 2014-01-07 Joel Brobecker <brobecker@adacore.com>
2139 * ada-valprint.c (print_record): Delete, implementation inlined...
2140 (ada_val_print_struct_union): ... here. Remove call to
2141 ada_check_typedef in inlined implementation.
2143 2014-01-07 Joel Brobecker <brobecker@adacore.com>
2145 * ada-valprint.c (ada_val_print_gnat_array): New function,
2146 extracted from ada_val_print_1;
2147 (ada_val_print_ptr, ada_val_print_num, ada_val_print_enum)
2148 (ada_val_print_flt, ada_val_print_struct_union)
2149 (ada_val_print_ref): Likewise.
2150 (ada_val_print_1): Delete variables i and elttype.
2151 Replace extracted-out code by call to corresponding
2154 2014-01-07 Joel Brobecker <brobecker@adacore.com>
2156 * ada-valprint.c (ada_val_print_1): Remove call to gdb_flush.
2158 2014-01-07 Joel Brobecker <brobecker@adacore.com>
2160 * ada-valprint.c (ada_val_print_1): Replace calls to
2161 ada_val_print_1 by calls to val_print.
2163 2014-01-07 Joel Brobecker <brobecker@adacore.com>
2165 * ada-valprint.c (ada_val_print_1): Add parameter "language".
2166 Update calls to self accordingly. Replace calls to c_val_print
2167 by calls to val_print.
2169 2014-01-07 Joel Brobecker <brobecker@adacore.com>
2171 * ada-valprint.c (print_record): Delete declaration.
2172 (adjust_type_signedness, ada_val_print_1): Likewise.
2173 (ada_val_print): Move function implementation down.
2174 (print_variant_part, print_field_values, print_record):
2175 Move function implementation up.
2177 2014-01-07 Joel Brobecker <brobecker@adacore.com>
2179 * python/py-type.c (typy_get_name): New function.
2180 (type_object_getset): Add entry for attribute "name".
2181 * NEWS: Add entry mentioning this new attribute.
2183 2014-01-07 Yao Qi <yao@codesourcery.com>
2185 * gnu-nat.c (set_exceptions_cmd): Remove an empty body 'if'
2188 2014-01-07 Yao Qi <yao@codesourcery.com>
2190 * gnu-nat.c (info_port_rights): Add qualifier const to
2193 2014-01-07 Yao Qi <yao@codesourcery.com>
2195 * gnu-nat.c (trace_me): Use 'void' for empty argument list.
2197 2014-01-07 Yao Qi <yao@codesourcery.com>
2199 * gnu-nat.c (make_inf) Update declaration.
2200 (make_inf): Make it static.
2201 (inf_set_traced): Likewise.
2202 (inf_port_to_thread, inf_task_died_status): Likewise.
2204 2014-01-07 Yao Qi <yao@codesourcery.com>
2206 * gnu-nat.c (inf_tid_to_proc): Remove declaration.
2208 2014-01-07 Yao Qi <yao@codesourcery.com>
2210 * gnu-nat.c (_initialize_gnu_nat): Declare.
2212 2014-01-07 Yao Qi <yao@codesourcery.com>
2214 * gdbarch.sh (byte_order, byte_order_for_code): Change type to
2216 (struct gdbarch_info) <byte_order>: Change type to
2218 <byte_order_for_code>: Likewise.
2219 * gdbarch.c, gdbarch.h: Regenerated.
2221 2014-01-06 Sasha Smundak <asmundak@google.com>
2223 * jit.c: (jit_reader_load_command): Fix JIT reader path creation.
2225 2014-01-06 Tom Tromey <tromey@redhat.com>
2227 * doublest.c (convert_doublest_to_floatformat): Use const, not
2229 * somread.c (som_symtab_read): Likewise.
2231 2014-01-07 Hui Zhu <hui@codesourcery.com>
2233 * gdb_bfd.c (gdb_bfd_stash_filename): Removed.
2234 (gdb_bfd_open): Removed gdb_bfd_stash_filename.
2235 (gdb_bfd_fopen): Ditto.
2236 (gdb_bfd_openr): Ditto.
2237 (gdb_bfd_openw): Ditto.
2238 (gdb_bfd_openr_iovec): Ditto.
2239 (gdb_bfd_fdopenr): Ditto.
2240 * gdb_bfd.h (gdb_bfd_stash_filename): Removed.
2241 * solib-aix.c (solib_aix_bfd_open): Alloc object_bfd->filename
2243 * solib-darwin.c (darwin_bfd_open): Alloc res->filename
2245 * symfile-mem.c (symbol_file_add_from_memory): Removed
2246 gdb_bfd_stash_filename.
2248 2014-01-03 Doug Evans <dje@google.com>
2250 * nat/linux-waitpid.c (linux_debug): Remove extraneous \n from
2253 2014-01-01 Joel Brobecker <brobecker@adacore.com>
2255 Update year range in copyright notice of all files.
2257 2014-01-01 Joel Brobecker <brobecker@adacore.com>
2259 * top.c (print_gdb_version): Set copyright year to 2014.
2261 2014-01-01 Joel Brobecker <brobecker@adacore.com>
2263 * config/djgpp/fnchange.lst: Add entry for gdb/ChangeLog-2013.
2265 For older changes see ChangeLog-2013.
2271 version-control: never
projects / thirdparty / binutils-gdb.git / blob