gdb/doc/Makefile.in

   1 ##Copyright (C) 1991, 1992 Free Software Foundation, Inc.
   2
   3 # Makefile for GDB documentation.
   4 # This file is part of GDB.
   5
   6 # This program is free software; you can redistribute it and/or modify
   7 # it under the terms of the GNU General Public License as published by
   8 # the Free Software Foundation; either version 2 of the License, or
   9 # (at your option) any later version.
  10 #
  11 # This program is distributed in the hope that it will be useful,
  12 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  13 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  14 # GNU General Public License for more details.
  15 #
  16 # You should have received a copy of the GNU General Public License
  17 # along with this program; if not, write to the Free Software
  18 # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
  19
  20 srcdir = .
  21
  22 prefix = /usr/local
  23
  24 infodir = $(prefix)/info
  25
  26 SHELL = /bin/sh
  27
  28 INSTALL = install -c
  29 INSTALL_PROGRAM = $(INSTALL)
  30 INSTALL_DATA = $(INSTALL)
  31
  32 # main GDB source directory
  33 gdbdir = $(srcdir)/..
  34
  35 # where to find texinfo; GDB dist should include a recent one
  36 TEXIDIR=${gdbdir}/../texinfo
  37
  38 # where to find makeinfo, preferably one designed for texinfo-2
  39 MAKEINFO=makeinfo
  40
  41 # where to find texi2roff, ditto
  42 TEXI2ROFF=texi2roff
  43
  44 # Where is the source dir for the READLINE library doc?
  45 # Traditionally readline is in .. or .
  46 READLINE_DIR = ${gdbdir}/../readline/doc
  47
  48 SET_TEXINPUTS = TEXINPUTS=${TEXIDIR}:.:$(srcdir):$(READLINE_DIR):$$TEXINPUTS
  49
  50 # There may be alternate predefined collections of switches to configure
  51 # the GDB manual.  Normally this is not done in synch with the software
  52 # config system, since this choice tends to be independent; most people
  53 # want a doc config of `all' for a generic manual, regardless of sw config.
  54 DOC_CONFIG = all
  55
  56 # This list of sed edits will edit the GDB reference card
  57 # for what fonts and what papersize to use.
  58 # By default (NO edits applied), the refcard uses:
  59 #    - Computer Modern (CM) fonts
  60 #    - US letter paper (8.5x11in)
  61 # List some of the following files for alternative fonts and paper:
  62 #  a4rc.sed     use A4 paper (297 x 210 mm)
  63 #  psrc.sed     use PostScript fonts (Karl Berry short TeX names)
  64 # lpsrc.sed     use PostScript fonts (full PostScript names in TeX)
  65 # e.g. for A4, Postscript:  REFEDITS = a4rc.sed psrc.sed
  66 #      for A4, CM fonts:    REFEDITS = a4rc.sed
  67 #      for US, PS fonts:    REFEDITS = psrc.sed
  68 #      for default:
  69 REFEDITS =
  70
  71 # Don Knuth's TeX formatter
  72 TEX = tex
  73
  74 # auxiliary program for sorting Texinfo indices
  75 TEXINDEX = texindex
  76
  77 # Program to generate Postscript files from DVI files.
  78 DVIPS = dvips
  79
  80 # Main GDB manual's source files
  81 SFILES_INCLUDED = gdb-cfg.texi $(srcdir)/remote.texi
  82
  83 SFILES_LOCAL = $(srcdir)/gdb.texinfo GDBvn.texi $(SFILES_INCLUDED)
  84
  85 SFILES_DOC = $(SFILES_LOCAL) \
  86                 $(READLINE_DIR)/rluser.texinfo $(READLINE_DIR)/inc-hist.texi
  87
  88 #### Host, target, and site specific Makefile fragments come in here.
  89 ###
  90
  91 all install:
  92
  93 info: gdb.info gdbint.info stabs.info
  94 dvi: gdb.dvi gdbint.dvi stabs.dvi refcard.dvi
  95 ps: gdb.ps gdbint.ps stabs.ps refcard.ps
  96 all-doc: info dvi ps
  97
  98 install-info: info
  99         for i in *.info* ; do \
 100                 $(INSTALL_DATA) $$i $(infodir)/$$i ; \
 101         done
 102
 103 STAGESTUFF = *.info* gdb-all.texi GDBvn.texi *.ps *.dvi
 104
 105 # Copy the object files from a particular stage into a subdirectory.
 106 stage1: force
 107         -mkdir stage1
 108         -mv $(STAGESTUFF) stage1
 109
 110 stage2: force
 111         -mkdir stage2
 112         -mv $(STAGESTUFF) stage2
 113
 114 stage3: force
 115         -mkdir stage3
 116         -mv $(STAGESTUFF) stage3
 117
 118 against=stage2
 119
 120 comparison: force
 121         for i in $(STAGESTUFF) ; do cmp $$i $(against)/$$i ; done
 122
 123 de-stage1: force
 124         -(cd stage1 ; mv -f * ..)
 125         -rmdir stage1
 126
 127 de-stage2: force
 128         -(cd stage2 ; mv -f * ..)
 129         -rmdir stage2
 130
 131 de-stage3: force
 132         -(cd stage3 ; mv -f * ..)
 133         -rmdir stage3
 134
 135 # The "least clean" level of cleaning.  Get rid of files which are
 136 # automatically generated files that are just intermediate files,
 137 #
 138 mostlyclean:
 139         rm -f gdb.mm gdb.ms gdb.me links2roff
 140         rm -f *.aux *.cp* *.fn* *.ky* *.log *.pg* *.toc *.tp* *.vr*
 141         rm -f sedref.dvi sedref.tex tmp.sed
 142
 143 clean: mostlyclean
 144         rm -f rluser.texinfo inc-hist.texi gdb-cfg.texi
 145
 146 distclean: clean
 147         rm -f Makefile config.status
 148
 149 # GDBvn.texi, the dvi files, the info files, and the postscript files,
 150 # are all part of the distribution, so it should not be removed by
 151 # "clean" or "distclean".  Use maintainer-clean to remove them.
 152
 153 maintainer-clean realclean: distclean
 154         rm -f GDBvn.texi *.info* *.dvi *.ps
 155
 156 # GDB QUICK REFERENCE (dvi output)
 157 refcard.dvi : refcard.tex $(REFEDITS)
 158         if [ -z "$(REFEDITS)" ]; then \
 159                 cp $(srcdir)/refcard.tex sedref.tex ; \
 160         else \
 161                 echo > tmp.sed ; \
 162                 for f in "$(REFEDITS)" ; do \
 163                         cat $(srcdir)/$$f >>tmp.sed ; done ; \
 164                 sed -f tmp.sed $(srcdir)/refcard.tex >sedref.tex ; \
 165         fi
 166         $(SET_TEXINPUTS) $(TEX) sedref.tex
 167         mv sedref.dvi refcard.dvi
 168         rm -f sedref.log sedref.tex tmp.sed
 169
 170 refcard.ps : refcard.dvi
 171         $(DVIPS) -t landscape -o $@ $?
 172
 173 # File to record current GDB version number (copied from main dir Makefile.in)
 174 GDBvn.texi : ${gdbdir}/Makefile.in
 175         echo "@set GDBVN `sed <$(srcdir)/../Makefile.in -n 's/VERSION = //p'`" > ./GDBvn.new
 176         mv GDBvn.new GDBvn.texi
 177
 178 # Updated atomically
 179 .PRECIOUS: GDBvn.texi
 180
 181 # Choose configuration for GDB manual (normally `all'; normally not tied into
 182 # `configure' script because most users prefer generic version of manual,
 183 # not one for their binary config---which may not be specifically
 184 # defined anyways).
 185 gdb-cfg.texi: ${srcdir}/${DOC_CONFIG}-cfg.texi
 186         ln -s ${srcdir}/${DOC_CONFIG}-cfg.texi gdb-cfg.texi || \
 187         ln ${srcdir}/${DOC_CONFIG}-cfg.texi gdb-cfg.texi || \
 188         cp ${srcdir}/${DOC_CONFIG}-cfg.texi gdb-cfg.texi
 189
 190 # GDB MANUAL: texinfo source, using @set/@clear/@value/@ifset/@ifclear
 191 # If your texinfo or makeinfo don't support these, get a new texinfo release
 192 #
 193 # The nonsense with GDBvn.texi gets this to run with both Sun and GNU make.
 194 #   Note that we can *generate* GDBvn.texi, but since we distribute one in the
 195 #   source directory for the benefit of people who *don't* use this makefile,
 196 #   VPATH will often tell make not to bother building it, because the one
 197 #   in the srcdir is up to date.  (if not, then make should build one here).
 198
 199 # GDB MANUAL: TeX dvi file
 200 gdb.dvi: ${SFILES_DOC}
 201         if [ ! -f ./GDBvn.texi ]; then \
 202                 ln -s $(srcdir)/GDBvn.texi . || \
 203                 ln $(srcdir)/GDBvn.texi . || \
 204                 cp $(srcdir)/GDBvn.texi . ; else true; fi
 205         $(SET_TEXINPUTS) $(TEX) gdb.texinfo
 206         $(SET_TEXINPUTS) $(TEX) gdb.texinfo
 207         $(TEXINDEX) gdb.??
 208         $(SET_TEXINPUTS) $(TEX) gdb.texinfo
 209         rm -f gdb.aux gdb.cp* gdb.fn* gdb.ky* gdb.log gdb.pg* gdb.toc \
 210                 gdb.tp* gdb.vr*
 211
 212 gdb.ps: gdb.dvi
 213         $(DVIPS) -o $@ $?
 214
 215 # GDB MANUAL: info file
 216 # We're using texinfo2, and older makeinfo's may not be able to
 217 # cope with all the markup.
 218 gdb.info: ${SFILES_DOC}
 219         $(MAKEINFO) -I ${READLINE_DIR} -I $(srcdir) -o ./gdb.info gdb.texinfo
 220
 221 # GDB MANUAL: roff translations
 222 # Try to use a recent texi2roff.  v2 was put on prep in jan91.
 223 # If you want an index, see texi2roff doc for postprocessing
 224 # and add -i to texi2roff invocations below.
 225 # Workarounds for texi2roff-2 (probably fixed in later texi2roff's, delete
 226 #    corresponding -e lines when later texi2roff's are current)
 227 # + @ifinfo's deleted explicitly due to texi2roff-2 bug w nested constructs.
 228 # + @c's deleted explicitly because texi2roff sees texinfo commands in them
 229 # + @   (that's at-BLANK) not recognized by texi2roff, turned into blank
 230 # + @alphaenumerate is ridiculously new, turned into @enumerate
 231
 232 # texi2roff doesn't have a notion of include dirs, so we have to fake
 233 # it out for gdb manual's include files---but only if not configured
 234 # in main sourcedir.
 235 links2roff: $(SFILES_INCLUDED)
 236         if [ ! -f gdb.texinfo ]; then \
 237                 ln -s $(SFILES_INCLUDED) . || \
 238                 ln $(SFILES_INCLUDED)    . || \
 239                 cp $(SFILES_INCLUDED)    . ; \
 240         fi
 241         touch links2roff
 242
 243 #  "Readline" appendices.  Get them also due to lack of includes,
 244 # regardless of whether or not configuring in main sourcedir.
 245 # @ftable removed due to bug in texi2roff-2; if your texi2roff
 246 # is newer, try just ln or cp
 247 rluser.texinfo: ${READLINE_DIR}/rluser.texinfo
 248                 sed -e 's/^@ftable/@table/g' \
 249                 -e 's/^@end ftable/@end table/g' \
 250                 ${READLINE_DIR}/rluser.texinfo > ./rluser.texinfo
 251
 252 inc-hist.texi: ${READLINE_DIR}/inc-hist.texi
 253         ln -s ${READLINE_DIR}/inc-hist.texi . || \
 254         ln ${READLINE_DIR}/inc-hist.texi . || \
 255         cp ${READLINE_DIR}/inc-hist.texi .
 256
 257 # gdb manual suitable for [gtn]roff -me
 258 gdb.me: $(SFILES_LOCAL) links2roff rluser.texinfo inc-hist.texi
 259         sed -e '/\\input texinfo/d' \
 260                 -e '/@c TEXI2ROFF-KILL/,/@c END TEXI2ROFF-KILL/d' \
 261                 -e '/^@ifinfo/,/^@end ifinfo/d' \
 262                 -e '/^@c /d' \
 263                 -e 's/{.*,,/{/' \
 264                 -e 's/@ / /g' \
 265                 -e 's/^@alphaenumerate/@enumerate/g' \
 266                 -e 's/^@end alphaenumerate/@end enumerate/g' \
 267                 $(srcdir)/gdb.texinfo | \
 268         $(TEXI2ROFF) -me | \
 269         sed -e 's/---/\\(em/g' \
 270         >gdb.me
 271
 272 # gdb manual suitable for [gtn]roff -ms
 273 gdb.ms: $(SFILES_LOCAL) links2roff rluser.texinfo inc-hist.texi
 274         sed -e '/\\input texinfo/d' \
 275                 -e '/@c TEXI2ROFF-KILL/,/@c END TEXI2ROFF-KILL/d' \
 276                 -e '/^@ifinfo/,/^@end ifinfo/d' \
 277                 -e '/^@c /d' \
 278                 -e 's/{.*,,/{/' \
 279                 -e 's/@ / /g' \
 280                 -e 's/^@alphaenumerate/@enumerate/g' \
 281                 -e 's/^@end alphaenumerate/@end enumerate/g' \
 282                 $(srcdir)/gdb.texinfo | \
 283         $(TEXI2ROFF) -ms | \
 284         sed -e 's/---/\\(em/g' \
 285         >gdb.ms
 286
 287 # gdb manual suitable for [tn]roff -mm
 288 # '@noindent's removed due to texi2roff-2 mm bug; if yours is newer,
 289 #   try leaving them in
 290 gdb.mm: $(SFILES_LOCAL) links2roff rluser.texinfo inc-hist.texi
 291         sed -e '/\\input texinfo/d' \
 292                 -e '/@c TEXI2ROFF-KILL/,/@c END TEXI2ROFF-KILL/d' \
 293                 -e '/^@ifinfo/,/^@end ifinfo/d' \
 294                 -e '/^@c /d' \
 295                 -e 's/{.*,,/{/' \
 296                 -e '/@noindent/d' \
 297                 -e 's/@ / /g' \
 298                 -e 's/^@alphaenumerate/@enumerate/g' \
 299                 -e 's/^@end alphaenumerate/@end enumerate/g' \
 300                 $(srcdir)/gdb.texinfo | \
 301         $(TEXI2ROFF) -mm | \
 302         sed -e 's/---/\\(em/g' \
 303         >gdb.mm
 304
 305 # start-sanitize-gdbtk
 306 # GDB GUI MANUAL: TeX dvi file
 307 gdbgui.dvi : gdbgui.texinfo ${SFILES_DOC}
 308         $(SET_TEXINPUTS) $(TEX) gdbgui.texinfo
 309         $(TEXINDEX) gdbgui.??
 310         $(SET_TEXINPUTS) $(TEX) gdbgui.texinfo
 311         rm -f gdbgui.aux gdbgui.cp* gdbgui.fn* gdbgui.ky* \
 312                 gdbgui.log gdbgui.pg* gdbgui.toc gdbgui.tp* gdbgui.vr*
 313
 314 # GDB GUI MANUAL: info file
 315 gdb-gui: gdbgui.info
 316
 317 gdbgui.info: gdbgui.texinfo ${SFILES_DOC}
 318         $(MAKEINFO) -o gdbgui.info $(srcdir)/gdbgui.texinfo
 319 # end-sanitize-gdbtk
 320
 321 # GDB INTERNALS MANUAL: TeX dvi file
 322 gdbint.dvi : gdbint.texinfo
 323         $(SET_TEXINPUTS) $(TEX) gdbint.texinfo
 324         $(TEXINDEX) gdbint.??
 325         $(SET_TEXINPUTS) $(TEX) gdbint.texinfo
 326         rm -f gdbint.aux gdbint.cp* gdbint.fn* gdbint.ky* \
 327                 gdbint.log gdbint.pg* gdbint.toc gdbint.tp* gdbint.vr*
 328
 329 gdbint.ps : gdbint.dvi
 330         $(DVIPS) -o $@ $?
 331
 332 # GDB INTERNALS MANUAL: info file
 333
 334 gdbint.info: gdbint.texinfo
 335         $(MAKEINFO) -o gdbint.info $(srcdir)/gdbint.texinfo
 336
 337 stabs.info: stabs.texinfo
 338         $(MAKEINFO) -o stabs.info $(srcdir)/stabs.texinfo
 339
 340 # STABS DOCUMENTATION: TeX dvi file
 341 stabs.dvi : stabs.texinfo
 342         $(SET_TEXINPUTS) $(TEX) stabs.texinfo
 343         $(TEXINDEX) stabs.??
 344         $(SET_TEXINPUTS) $(TEX) stabs.texinfo
 345         rm -f stabs.aux stabs.cp* stabs.fn* stabs.ky* \
 346                 stabs.log stabs.pg* stabs.toc stabs.tp* stabs.vr*
 347
 348 stabs.ps: stabs.dvi
 349         $(DVIPS) -o $@ $?
 350
 351 force:
 352
 353 Makefile: Makefile.in $(host_makefile_frag) $(target_makefile_frag) config.status
 354         $(SHELL) ./config.status