1 /* Interface between GDB and target environments, including files and processes
3 Copyright (C) 1990-2014 Free Software Foundation, Inc.
5 Contributed by Cygnus Support. Written by John Gilmore.
7 This file is part of GDB.
9 This program is free software; you can redistribute it and/or modify
10 it under the terms of the GNU General Public License as published by
11 the Free Software Foundation; either version 3 of the License, or
12 (at your option) any later version.
14 This program is distributed in the hope that it will be useful,
15 but WITHOUT ANY WARRANTY; without even the implied warranty of
16 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 GNU General Public License for more details.
19 You should have received a copy of the GNU General Public License
20 along with this program. If not, see <http://www.gnu.org/licenses/>. */
22 #if !defined (TARGET_H)
30 struct bp_target_info
;
32 struct target_section_table
;
33 struct trace_state_variable
;
37 struct static_tracepoint_marker
;
38 struct traceframe_info
;
42 /* This include file defines the interface between the main part
43 of the debugger, and the part which is target-specific, or
44 specific to the communications interface between us and the
47 A TARGET is an interface between the debugger and a particular
48 kind of file or process. Targets can be STACKED in STRATA,
49 so that more than one target can potentially respond to a request.
50 In particular, memory accesses will walk down the stack of targets
51 until they find a target that is interested in handling that particular
52 address. STRATA are artificial boundaries on the stack, within
53 which particular kinds of targets live. Strata exist so that
54 people don't get confused by pushing e.g. a process target and then
55 a file target, and wondering why they can't see the current values
56 of variables any more (the file target is handling them and they
57 never get to the process target). So when you push a file target,
58 it goes into the file stratum, which is always below the process
61 #include "target/resume.h"
62 #include "target/wait.h"
63 #include "target/waitstatus.h"
68 #include "gdb_signals.h"
74 dummy_stratum
, /* The lowest of the low */
75 file_stratum
, /* Executable files, etc */
76 process_stratum
, /* Executing processes or core dump files */
77 thread_stratum
, /* Executing threads */
78 record_stratum
, /* Support record debugging */
79 arch_stratum
/* Architecture overrides */
82 enum thread_control_capabilities
84 tc_none
= 0, /* Default: can't control thread execution. */
85 tc_schedlock
= 1, /* Can lock the thread scheduler. */
88 /* The structure below stores information about a system call.
89 It is basically used in the "catch syscall" command, and in
90 every function that gives information about a system call.
92 It's also good to mention that its fields represent everything
93 that we currently know about a syscall in GDB. */
96 /* The syscall number. */
99 /* The syscall name. */
103 /* Return a pretty printed form of target_waitstatus.
104 Space for the result is malloc'd, caller must free. */
105 extern char *target_waitstatus_to_string (const struct target_waitstatus
*);
107 /* Return a pretty printed form of TARGET_OPTIONS.
108 Space for the result is malloc'd, caller must free. */
109 extern char *target_options_to_string (int target_options
);
111 /* Possible types of events that the inferior handler will have to
113 enum inferior_event_type
115 /* Process a normal inferior event which will result in target_wait
118 /* We are called because a timer went off. */
120 /* We are called to do stuff after the inferior stops. */
122 /* We are called to do some stuff after the inferior stops, but we
123 are expected to reenter the proceed() and
124 handle_inferior_event() functions. This is used only in case of
125 'step n' like commands. */
129 /* Target objects which can be transfered using target_read,
130 target_write, et cetera. */
134 /* AVR target specific transfer. See "avr-tdep.c" and "remote.c". */
136 /* SPU target specific transfer. See "spu-tdep.c". */
138 /* Transfer up-to LEN bytes of memory starting at OFFSET. */
139 TARGET_OBJECT_MEMORY
,
140 /* Memory, avoiding GDB's data cache and trusting the executable.
141 Target implementations of to_xfer_partial never need to handle
142 this object, and most callers should not use it. */
143 TARGET_OBJECT_RAW_MEMORY
,
144 /* Memory known to be part of the target's stack. This is cached even
145 if it is not in a region marked as such, since it is known to be
147 TARGET_OBJECT_STACK_MEMORY
,
148 /* Memory known to be part of the target code. This is cached even
149 if it is not in a region marked as such. */
150 TARGET_OBJECT_CODE_MEMORY
,
151 /* Kernel Unwind Table. See "ia64-tdep.c". */
152 TARGET_OBJECT_UNWIND_TABLE
,
153 /* Transfer auxilliary vector. */
155 /* StackGhost cookie. See "sparc-tdep.c". */
156 TARGET_OBJECT_WCOOKIE
,
157 /* Target memory map in XML format. */
158 TARGET_OBJECT_MEMORY_MAP
,
159 /* Flash memory. This object can be used to write contents to
160 a previously erased flash memory. Using it without erasing
161 flash can have unexpected results. Addresses are physical
162 address on target, and not relative to flash start. */
164 /* Available target-specific features, e.g. registers and coprocessors.
165 See "target-descriptions.c". ANNEX should never be empty. */
166 TARGET_OBJECT_AVAILABLE_FEATURES
,
167 /* Currently loaded libraries, in XML format. */
168 TARGET_OBJECT_LIBRARIES
,
169 /* Currently loaded libraries specific for SVR4 systems, in XML format. */
170 TARGET_OBJECT_LIBRARIES_SVR4
,
171 /* Currently loaded libraries specific to AIX systems, in XML format. */
172 TARGET_OBJECT_LIBRARIES_AIX
,
173 /* Get OS specific data. The ANNEX specifies the type (running
174 processes, etc.). The data being transfered is expected to follow
175 the DTD specified in features/osdata.dtd. */
176 TARGET_OBJECT_OSDATA
,
177 /* Extra signal info. Usually the contents of `siginfo_t' on unix
179 TARGET_OBJECT_SIGNAL_INFO
,
180 /* The list of threads that are being debugged. */
181 TARGET_OBJECT_THREADS
,
182 /* Collected static trace data. */
183 TARGET_OBJECT_STATIC_TRACE_DATA
,
184 /* The HP-UX registers (those that can be obtained or modified by using
185 the TT_LWP_RUREGS/TT_LWP_WUREGS ttrace requests). */
186 TARGET_OBJECT_HPUX_UREGS
,
187 /* The HP-UX shared library linkage pointer. ANNEX should be a string
188 image of the code address whose linkage pointer we are looking for.
190 The size of the data transfered is always 8 bytes (the size of an
192 TARGET_OBJECT_HPUX_SOLIB_GOT
,
193 /* Traceframe info, in XML format. */
194 TARGET_OBJECT_TRACEFRAME_INFO
,
195 /* Load maps for FDPIC systems. */
197 /* Darwin dynamic linker info data. */
198 TARGET_OBJECT_DARWIN_DYLD_INFO
,
199 /* OpenVMS Unwind Information Block. */
200 TARGET_OBJECT_OPENVMS_UIB
,
201 /* Branch trace data, in XML format. */
203 /* Possible future objects: TARGET_OBJECT_FILE, ... */
206 /* Possible values returned by target_xfer_partial, etc. */
208 enum target_xfer_status
210 /* Some bytes are transferred. */
213 /* No further transfer is possible. */
216 /* Generic I/O error. Note that it's important that this is '-1',
217 as we still have target_xfer-related code returning hardcoded
219 TARGET_XFER_E_IO
= -1,
221 /* Transfer failed because the piece of the object requested is
223 TARGET_XFER_E_UNAVAILABLE
= -2,
225 /* Keep list in sync with target_xfer_error_to_string. */
228 #define TARGET_XFER_STATUS_ERROR_P(STATUS) ((STATUS) < TARGET_XFER_EOF)
230 /* Return the string form of ERR. */
232 extern const char *target_xfer_status_to_string (enum target_xfer_status err
);
234 /* Enumeration of the kinds of traceframe searches that a target may
235 be able to perform. */
246 typedef struct static_tracepoint_marker
*static_tracepoint_marker_p
;
247 DEF_VEC_P(static_tracepoint_marker_p
);
249 typedef enum target_xfer_status
250 target_xfer_partial_ftype (struct target_ops
*ops
,
251 enum target_object object
,
254 const gdb_byte
*writebuf
,
257 ULONGEST
*xfered_len
);
259 /* Request that OPS transfer up to LEN 8-bit bytes of the target's
260 OBJECT. The OFFSET, for a seekable object, specifies the
261 starting point. The ANNEX can be used to provide additional
262 data-specific information to the target.
264 Return the number of bytes actually transfered, or a negative error
265 code (an 'enum target_xfer_error' value) if the transfer is not
266 supported or otherwise fails. Return of a positive value less than
267 LEN indicates that no further transfer is possible. Unlike the raw
268 to_xfer_partial interface, callers of these functions do not need
269 to retry partial transfers. */
271 extern LONGEST
target_read (struct target_ops
*ops
,
272 enum target_object object
,
273 const char *annex
, gdb_byte
*buf
,
274 ULONGEST offset
, LONGEST len
);
276 struct memory_read_result
278 /* First address that was read. */
280 /* Past-the-end address. */
285 typedef struct memory_read_result memory_read_result_s
;
286 DEF_VEC_O(memory_read_result_s
);
288 extern void free_memory_read_result_vector (void *);
290 extern VEC(memory_read_result_s
)* read_memory_robust (struct target_ops
*ops
,
294 extern LONGEST
target_write (struct target_ops
*ops
,
295 enum target_object object
,
296 const char *annex
, const gdb_byte
*buf
,
297 ULONGEST offset
, LONGEST len
);
299 /* Similar to target_write, except that it also calls PROGRESS with
300 the number of bytes written and the opaque BATON after every
301 successful partial write (and before the first write). This is
302 useful for progress reporting and user interaction while writing
303 data. To abort the transfer, the progress callback can throw an
306 LONGEST
target_write_with_progress (struct target_ops
*ops
,
307 enum target_object object
,
308 const char *annex
, const gdb_byte
*buf
,
309 ULONGEST offset
, LONGEST len
,
310 void (*progress
) (ULONGEST
, void *),
313 /* Wrapper to perform a full read of unknown size. OBJECT/ANNEX will
314 be read using OPS. The return value will be -1 if the transfer
315 fails or is not supported; 0 if the object is empty; or the length
316 of the object otherwise. If a positive value is returned, a
317 sufficiently large buffer will be allocated using xmalloc and
318 returned in *BUF_P containing the contents of the object.
320 This method should be used for objects sufficiently small to store
321 in a single xmalloc'd buffer, when no fixed bound on the object's
322 size is known in advance. Don't try to read TARGET_OBJECT_MEMORY
323 through this function. */
325 extern LONGEST
target_read_alloc (struct target_ops
*ops
,
326 enum target_object object
,
327 const char *annex
, gdb_byte
**buf_p
);
329 /* Read OBJECT/ANNEX using OPS. The result is NUL-terminated and
330 returned as a string, allocated using xmalloc. If an error occurs
331 or the transfer is unsupported, NULL is returned. Empty objects
332 are returned as allocated but empty strings. A warning is issued
333 if the result contains any embedded NUL bytes. */
335 extern char *target_read_stralloc (struct target_ops
*ops
,
336 enum target_object object
,
339 /* See target_ops->to_xfer_partial. */
340 extern target_xfer_partial_ftype target_xfer_partial
;
342 /* Wrappers to target read/write that perform memory transfers. They
343 throw an error if the memory transfer fails.
345 NOTE: cagney/2003-10-23: The naming schema is lifted from
346 "frame.h". The parameter order is lifted from get_frame_memory,
347 which in turn lifted it from read_memory. */
349 extern void get_target_memory (struct target_ops
*ops
, CORE_ADDR addr
,
350 gdb_byte
*buf
, LONGEST len
);
351 extern ULONGEST
get_target_memory_unsigned (struct target_ops
*ops
,
352 CORE_ADDR addr
, int len
,
353 enum bfd_endian byte_order
);
355 struct thread_info
; /* fwd decl for parameter list below: */
357 /* The type of the callback to the to_async method. */
359 typedef void async_callback_ftype (enum inferior_event_type event_type
,
362 /* These defines are used to mark target_ops methods. The script
363 make-target-delegates scans these and auto-generates the base
364 method implementations. There are four macros that can be used:
366 1. TARGET_DEFAULT_IGNORE. There is no argument. The base method
367 does nothing. This is only valid if the method return type is
370 2. TARGET_DEFAULT_NORETURN. The argument is a function call, like
371 'tcomplain ()'. The base method simply makes this call, which is
372 assumed not to return.
374 3. TARGET_DEFAULT_RETURN. The argument is a C expression. The
375 base method returns this expression's value.
377 4. TARGET_DEFAULT_FUNC. The argument is the name of a function.
378 make-target-delegates does not generate a base method in this case,
379 but instead uses the argument function as the base method. */
381 #define TARGET_DEFAULT_IGNORE()
382 #define TARGET_DEFAULT_NORETURN(ARG)
383 #define TARGET_DEFAULT_RETURN(ARG)
384 #define TARGET_DEFAULT_FUNC(ARG)
388 struct target_ops
*beneath
; /* To the target under this one. */
389 char *to_shortname
; /* Name this target type */
390 char *to_longname
; /* Name for printing */
391 char *to_doc
; /* Documentation. Does not include trailing
392 newline, and starts with a one-line descrip-
393 tion (probably similar to to_longname). */
394 /* Per-target scratch pad. */
396 /* The open routine takes the rest of the parameters from the
397 command, and (if successful) pushes a new target onto the
398 stack. Targets should supply this routine, if only to provide
400 void (*to_open
) (char *, int);
401 /* Old targets with a static target vector provide "to_close".
402 New re-entrant targets provide "to_xclose" and that is expected
403 to xfree everything (including the "struct target_ops"). */
404 void (*to_xclose
) (struct target_ops
*targ
);
405 void (*to_close
) (struct target_ops
*);
406 void (*to_attach
) (struct target_ops
*ops
, char *, int);
407 void (*to_post_attach
) (struct target_ops
*, int);
408 void (*to_detach
) (struct target_ops
*ops
, const char *, int);
409 void (*to_disconnect
) (struct target_ops
*, char *, int);
410 void (*to_resume
) (struct target_ops
*, ptid_t
, int, enum gdb_signal
)
411 TARGET_DEFAULT_NORETURN (noprocess ());
412 ptid_t (*to_wait
) (struct target_ops
*,
413 ptid_t
, struct target_waitstatus
*, int)
414 TARGET_DEFAULT_NORETURN (noprocess ());
415 void (*to_fetch_registers
) (struct target_ops
*, struct regcache
*, int);
416 void (*to_store_registers
) (struct target_ops
*, struct regcache
*, int)
417 TARGET_DEFAULT_NORETURN (noprocess ());
418 void (*to_prepare_to_store
) (struct target_ops
*, struct regcache
*);
420 /* Transfer LEN bytes of memory between GDB address MYADDR and
421 target address MEMADDR. If WRITE, transfer them to the target, else
422 transfer them from the target. TARGET is the target from which we
425 Return value, N, is one of the following:
427 0 means that we can't handle this. If errno has been set, it is the
428 error which prevented us from doing it (FIXME: What about bfd_error?).
430 positive (call it N) means that we have transferred N bytes
431 starting at MEMADDR. We might be able to handle more bytes
432 beyond this length, but no promises.
434 negative (call its absolute value N) means that we cannot
435 transfer right at MEMADDR, but we could transfer at least
436 something at MEMADDR + N.
438 NOTE: cagney/2004-10-01: This has been entirely superseeded by
439 to_xfer_partial and inferior inheritance. */
441 int (*deprecated_xfer_memory
) (CORE_ADDR memaddr
, gdb_byte
*myaddr
,
443 struct mem_attrib
*attrib
,
444 struct target_ops
*target
);
446 void (*to_files_info
) (struct target_ops
*);
447 int (*to_insert_breakpoint
) (struct target_ops
*, struct gdbarch
*,
448 struct bp_target_info
*)
449 TARGET_DEFAULT_FUNC (memory_insert_breakpoint
);
450 int (*to_remove_breakpoint
) (struct target_ops
*, struct gdbarch
*,
451 struct bp_target_info
*)
452 TARGET_DEFAULT_FUNC (memory_remove_breakpoint
);
453 int (*to_can_use_hw_breakpoint
) (struct target_ops
*, int, int, int);
454 int (*to_ranged_break_num_registers
) (struct target_ops
*);
455 int (*to_insert_hw_breakpoint
) (struct target_ops
*,
456 struct gdbarch
*, struct bp_target_info
*);
457 int (*to_remove_hw_breakpoint
) (struct target_ops
*,
458 struct gdbarch
*, struct bp_target_info
*);
460 /* Documentation of what the two routines below are expected to do is
461 provided with the corresponding target_* macros. */
462 int (*to_remove_watchpoint
) (struct target_ops
*,
463 CORE_ADDR
, int, int, struct expression
*);
464 int (*to_insert_watchpoint
) (CORE_ADDR
, int, int, struct expression
*);
466 int (*to_insert_mask_watchpoint
) (struct target_ops
*,
467 CORE_ADDR
, CORE_ADDR
, int);
468 int (*to_remove_mask_watchpoint
) (struct target_ops
*,
469 CORE_ADDR
, CORE_ADDR
, int);
470 int (*to_stopped_by_watchpoint
) (struct target_ops
*)
471 TARGET_DEFAULT_RETURN (0);
472 int to_have_steppable_watchpoint
;
473 int to_have_continuable_watchpoint
;
474 int (*to_stopped_data_address
) (struct target_ops
*, CORE_ADDR
*)
475 TARGET_DEFAULT_RETURN (0);
476 int (*to_watchpoint_addr_within_range
) (struct target_ops
*,
477 CORE_ADDR
, CORE_ADDR
, int);
479 /* Documentation of this routine is provided with the corresponding
481 int (*to_region_ok_for_hw_watchpoint
) (CORE_ADDR
, int);
483 int (*to_can_accel_watchpoint_condition
) (CORE_ADDR
, int, int,
484 struct expression
*);
485 int (*to_masked_watch_num_registers
) (struct target_ops
*,
486 CORE_ADDR
, CORE_ADDR
);
487 void (*to_terminal_init
) (void);
488 void (*to_terminal_inferior
) (void);
489 void (*to_terminal_ours_for_output
) (void);
490 void (*to_terminal_ours
) (void);
491 void (*to_terminal_save_ours
) (void);
492 void (*to_terminal_info
) (const char *, int);
493 void (*to_kill
) (struct target_ops
*);
494 void (*to_load
) (char *, int);
495 void (*to_create_inferior
) (struct target_ops
*,
496 char *, char *, char **, int);
497 void (*to_post_startup_inferior
) (ptid_t
);
498 int (*to_insert_fork_catchpoint
) (int);
499 int (*to_remove_fork_catchpoint
) (int);
500 int (*to_insert_vfork_catchpoint
) (int);
501 int (*to_remove_vfork_catchpoint
) (int);
502 int (*to_follow_fork
) (struct target_ops
*, int, int);
503 int (*to_insert_exec_catchpoint
) (int);
504 int (*to_remove_exec_catchpoint
) (int);
505 int (*to_set_syscall_catchpoint
) (int, int, int, int, int *);
506 int (*to_has_exited
) (int, int, int *);
507 void (*to_mourn_inferior
) (struct target_ops
*);
508 int (*to_can_run
) (void);
510 /* Documentation of this routine is provided with the corresponding
512 void (*to_pass_signals
) (int, unsigned char *);
514 /* Documentation of this routine is provided with the
515 corresponding target_* function. */
516 void (*to_program_signals
) (int, unsigned char *);
518 int (*to_thread_alive
) (struct target_ops
*, ptid_t ptid
);
519 void (*to_find_new_threads
) (struct target_ops
*);
520 char *(*to_pid_to_str
) (struct target_ops
*, ptid_t
);
521 char *(*to_extra_thread_info
) (struct thread_info
*);
522 char *(*to_thread_name
) (struct thread_info
*);
523 void (*to_stop
) (ptid_t
);
524 void (*to_rcmd
) (char *command
, struct ui_file
*output
);
525 char *(*to_pid_to_exec_file
) (int pid
);
526 void (*to_log_command
) (const char *);
527 struct target_section_table
*(*to_get_section_table
) (struct target_ops
*);
528 enum strata to_stratum
;
529 int (*to_has_all_memory
) (struct target_ops
*);
530 int (*to_has_memory
) (struct target_ops
*);
531 int (*to_has_stack
) (struct target_ops
*);
532 int (*to_has_registers
) (struct target_ops
*);
533 int (*to_has_execution
) (struct target_ops
*, ptid_t
);
534 int to_has_thread_control
; /* control thread execution */
535 int to_attach_no_wait
;
536 /* ASYNC target controls */
537 int (*to_can_async_p
) (struct target_ops
*)
538 TARGET_DEFAULT_FUNC (find_default_can_async_p
);
539 int (*to_is_async_p
) (struct target_ops
*)
540 TARGET_DEFAULT_FUNC (find_default_is_async_p
);
541 void (*to_async
) (struct target_ops
*, async_callback_ftype
*, void *)
542 TARGET_DEFAULT_NORETURN (tcomplain ());
543 int (*to_supports_non_stop
) (void);
544 /* find_memory_regions support method for gcore */
545 int (*to_find_memory_regions
) (find_memory_region_ftype func
, void *data
);
546 /* make_corefile_notes support method for gcore */
547 char * (*to_make_corefile_notes
) (bfd
*, int *);
548 /* get_bookmark support method for bookmarks */
549 gdb_byte
* (*to_get_bookmark
) (char *, int);
550 /* goto_bookmark support method for bookmarks */
551 void (*to_goto_bookmark
) (gdb_byte
*, int);
552 /* Return the thread-local address at OFFSET in the
553 thread-local storage for the thread PTID and the shared library
554 or executable file given by OBJFILE. If that block of
555 thread-local storage hasn't been allocated yet, this function
556 may return an error. */
557 CORE_ADDR (*to_get_thread_local_address
) (struct target_ops
*ops
,
559 CORE_ADDR load_module_addr
,
562 /* Request that OPS transfer up to LEN 8-bit bytes of the target's
563 OBJECT. The OFFSET, for a seekable object, specifies the
564 starting point. The ANNEX can be used to provide additional
565 data-specific information to the target.
567 Return the transferred status, error or OK (an
568 'enum target_xfer_status' value). Save the number of bytes
569 actually transferred in *XFERED_LEN if transfer is successful
570 (TARGET_XFER_OK) or the number unavailable bytes if the requested
571 data is unavailable (TARGET_XFER_E_UNAVAILABLE). *XFERED_LEN
572 smaller than LEN does not indicate the end of the object, only
573 the end of the transfer; higher level code should continue
574 transferring if desired. This is handled in target.c.
576 The interface does not support a "retry" mechanism. Instead it
577 assumes that at least one byte will be transfered on each
580 NOTE: cagney/2003-10-17: The current interface can lead to
581 fragmented transfers. Lower target levels should not implement
582 hacks, such as enlarging the transfer, in an attempt to
583 compensate for this. Instead, the target stack should be
584 extended so that it implements supply/collect methods and a
585 look-aside object cache. With that available, the lowest
586 target can safely and freely "push" data up the stack.
588 See target_read and target_write for more information. One,
589 and only one, of readbuf or writebuf must be non-NULL. */
591 enum target_xfer_status (*to_xfer_partial
) (struct target_ops
*ops
,
592 enum target_object object
,
595 const gdb_byte
*writebuf
,
596 ULONGEST offset
, ULONGEST len
,
597 ULONGEST
*xfered_len
)
598 TARGET_DEFAULT_RETURN (TARGET_XFER_E_IO
);
600 /* Returns the memory map for the target. A return value of NULL
601 means that no memory map is available. If a memory address
602 does not fall within any returned regions, it's assumed to be
603 RAM. The returned memory regions should not overlap.
605 The order of regions does not matter; target_memory_map will
606 sort regions by starting address. For that reason, this
607 function should not be called directly except via
610 This method should not cache data; if the memory map could
611 change unexpectedly, it should be invalidated, and higher
612 layers will re-fetch it. */
613 VEC(mem_region_s
) *(*to_memory_map
) (struct target_ops
*);
615 /* Erases the region of flash memory starting at ADDRESS, of
618 Precondition: both ADDRESS and ADDRESS+LENGTH should be aligned
619 on flash block boundaries, as reported by 'to_memory_map'. */
620 void (*to_flash_erase
) (struct target_ops
*,
621 ULONGEST address
, LONGEST length
);
623 /* Finishes a flash memory write sequence. After this operation
624 all flash memory should be available for writing and the result
625 of reading from areas written by 'to_flash_write' should be
626 equal to what was written. */
627 void (*to_flash_done
) (struct target_ops
*);
629 /* Describe the architecture-specific features of this target.
630 Returns the description found, or NULL if no description
632 const struct target_desc
*(*to_read_description
) (struct target_ops
*ops
);
634 /* Build the PTID of the thread on which a given task is running,
635 based on LWP and THREAD. These values are extracted from the
636 task Private_Data section of the Ada Task Control Block, and
637 their interpretation depends on the target. */
638 ptid_t (*to_get_ada_task_ptid
) (long lwp
, long thread
);
640 /* Read one auxv entry from *READPTR, not reading locations >= ENDPTR.
641 Return 0 if *READPTR is already at the end of the buffer.
642 Return -1 if there is insufficient buffer for a whole entry.
643 Return 1 if an entry was read into *TYPEP and *VALP. */
644 int (*to_auxv_parse
) (struct target_ops
*ops
, gdb_byte
**readptr
,
645 gdb_byte
*endptr
, CORE_ADDR
*typep
, CORE_ADDR
*valp
);
647 /* Search SEARCH_SPACE_LEN bytes beginning at START_ADDR for the
648 sequence of bytes in PATTERN with length PATTERN_LEN.
650 The result is 1 if found, 0 if not found, and -1 if there was an error
651 requiring halting of the search (e.g. memory read error).
652 If the pattern is found the address is recorded in FOUND_ADDRP. */
653 int (*to_search_memory
) (struct target_ops
*ops
,
654 CORE_ADDR start_addr
, ULONGEST search_space_len
,
655 const gdb_byte
*pattern
, ULONGEST pattern_len
,
656 CORE_ADDR
*found_addrp
);
658 /* Can target execute in reverse? */
659 int (*to_can_execute_reverse
) (void);
661 /* The direction the target is currently executing. Must be
662 implemented on targets that support reverse execution and async
663 mode. The default simply returns forward execution. */
664 enum exec_direction_kind (*to_execution_direction
) (void);
666 /* Does this target support debugging multiple processes
668 int (*to_supports_multi_process
) (void);
670 /* Does this target support enabling and disabling tracepoints while a trace
671 experiment is running? */
672 int (*to_supports_enable_disable_tracepoint
) (void);
674 /* Does this target support disabling address space randomization? */
675 int (*to_supports_disable_randomization
) (void);
677 /* Does this target support the tracenz bytecode for string collection? */
678 int (*to_supports_string_tracing
) (void);
680 /* Does this target support evaluation of breakpoint conditions on its
682 int (*to_supports_evaluation_of_breakpoint_conditions
) (void);
684 /* Does this target support evaluation of breakpoint commands on its
686 int (*to_can_run_breakpoint_commands
) (void);
688 /* Determine current architecture of thread PTID.
690 The target is supposed to determine the architecture of the code where
691 the target is currently stopped at (on Cell, if a target is in spu_run,
692 to_thread_architecture would return SPU, otherwise PPC32 or PPC64).
693 This is architecture used to perform decr_pc_after_break adjustment,
694 and also determines the frame architecture of the innermost frame.
695 ptrace operations need to operate according to target_gdbarch ().
697 The default implementation always returns target_gdbarch (). */
698 struct gdbarch
*(*to_thread_architecture
) (struct target_ops
*, ptid_t
);
700 /* Determine current address space of thread PTID.
702 The default implementation always returns the inferior's
704 struct address_space
*(*to_thread_address_space
) (struct target_ops
*,
707 /* Target file operations. */
709 /* Open FILENAME on the target, using FLAGS and MODE. Return a
710 target file descriptor, or -1 if an error occurs (and set
712 int (*to_fileio_open
) (const char *filename
, int flags
, int mode
,
715 /* Write up to LEN bytes from WRITE_BUF to FD on the target.
716 Return the number of bytes written, or -1 if an error occurs
717 (and set *TARGET_ERRNO). */
718 int (*to_fileio_pwrite
) (int fd
, const gdb_byte
*write_buf
, int len
,
719 ULONGEST offset
, int *target_errno
);
721 /* Read up to LEN bytes FD on the target into READ_BUF.
722 Return the number of bytes read, or -1 if an error occurs
723 (and set *TARGET_ERRNO). */
724 int (*to_fileio_pread
) (int fd
, gdb_byte
*read_buf
, int len
,
725 ULONGEST offset
, int *target_errno
);
727 /* Close FD on the target. Return 0, or -1 if an error occurs
728 (and set *TARGET_ERRNO). */
729 int (*to_fileio_close
) (int fd
, int *target_errno
);
731 /* Unlink FILENAME on the target. Return 0, or -1 if an error
732 occurs (and set *TARGET_ERRNO). */
733 int (*to_fileio_unlink
) (const char *filename
, int *target_errno
);
735 /* Read value of symbolic link FILENAME on the target. Return a
736 null-terminated string allocated via xmalloc, or NULL if an error
737 occurs (and set *TARGET_ERRNO). */
738 char *(*to_fileio_readlink
) (const char *filename
, int *target_errno
);
741 /* Implement the "info proc" command. */
742 void (*to_info_proc
) (struct target_ops
*, char *, enum info_proc_what
);
744 /* Tracepoint-related operations. */
746 /* Prepare the target for a tracing run. */
747 void (*to_trace_init
) (void);
749 /* Send full details of a tracepoint location to the target. */
750 void (*to_download_tracepoint
) (struct bp_location
*location
);
752 /* Is the target able to download tracepoint locations in current
754 int (*to_can_download_tracepoint
) (void);
756 /* Send full details of a trace state variable to the target. */
757 void (*to_download_trace_state_variable
) (struct trace_state_variable
*tsv
);
759 /* Enable a tracepoint on the target. */
760 void (*to_enable_tracepoint
) (struct bp_location
*location
);
762 /* Disable a tracepoint on the target. */
763 void (*to_disable_tracepoint
) (struct bp_location
*location
);
765 /* Inform the target info of memory regions that are readonly
766 (such as text sections), and so it should return data from
767 those rather than look in the trace buffer. */
768 void (*to_trace_set_readonly_regions
) (void);
770 /* Start a trace run. */
771 void (*to_trace_start
) (void);
773 /* Get the current status of a tracing run. */
774 int (*to_get_trace_status
) (struct trace_status
*ts
);
776 void (*to_get_tracepoint_status
) (struct breakpoint
*tp
,
777 struct uploaded_tp
*utp
);
779 /* Stop a trace run. */
780 void (*to_trace_stop
) (void);
782 /* Ask the target to find a trace frame of the given type TYPE,
783 using NUM, ADDR1, and ADDR2 as search parameters. Returns the
784 number of the trace frame, and also the tracepoint number at
785 TPP. If no trace frame matches, return -1. May throw if the
787 int (*to_trace_find
) (enum trace_find_type type
, int num
,
788 CORE_ADDR addr1
, CORE_ADDR addr2
, int *tpp
);
790 /* Get the value of the trace state variable number TSV, returning
791 1 if the value is known and writing the value itself into the
792 location pointed to by VAL, else returning 0. */
793 int (*to_get_trace_state_variable_value
) (int tsv
, LONGEST
*val
);
795 int (*to_save_trace_data
) (const char *filename
);
797 int (*to_upload_tracepoints
) (struct uploaded_tp
**utpp
);
799 int (*to_upload_trace_state_variables
) (struct uploaded_tsv
**utsvp
);
801 LONGEST (*to_get_raw_trace_data
) (gdb_byte
*buf
,
802 ULONGEST offset
, LONGEST len
);
804 /* Get the minimum length of instruction on which a fast tracepoint
805 may be set on the target. If this operation is unsupported,
806 return -1. If for some reason the minimum length cannot be
807 determined, return 0. */
808 int (*to_get_min_fast_tracepoint_insn_len
) (void);
810 /* Set the target's tracing behavior in response to unexpected
811 disconnection - set VAL to 1 to keep tracing, 0 to stop. */
812 void (*to_set_disconnected_tracing
) (int val
);
813 void (*to_set_circular_trace_buffer
) (int val
);
814 /* Set the size of trace buffer in the target. */
815 void (*to_set_trace_buffer_size
) (LONGEST val
);
817 /* Add/change textual notes about the trace run, returning 1 if
818 successful, 0 otherwise. */
819 int (*to_set_trace_notes
) (const char *user
, const char *notes
,
820 const char *stopnotes
);
822 /* Return the processor core that thread PTID was last seen on.
823 This information is updated only when:
824 - update_thread_list is called
826 If the core cannot be determined -- either for the specified
827 thread, or right now, or in this debug session, or for this
828 target -- return -1. */
829 int (*to_core_of_thread
) (struct target_ops
*, ptid_t ptid
);
831 /* Verify that the memory in the [MEMADDR, MEMADDR+SIZE) range
832 matches the contents of [DATA,DATA+SIZE). Returns 1 if there's
833 a match, 0 if there's a mismatch, and -1 if an error is
834 encountered while reading memory. */
835 int (*to_verify_memory
) (struct target_ops
*, const gdb_byte
*data
,
836 CORE_ADDR memaddr
, ULONGEST size
);
838 /* Return the address of the start of the Thread Information Block
839 a Windows OS specific feature. */
840 int (*to_get_tib_address
) (ptid_t ptid
, CORE_ADDR
*addr
);
842 /* Send the new settings of write permission variables. */
843 void (*to_set_permissions
) (void);
845 /* Look for a static tracepoint marker at ADDR, and fill in MARKER
846 with its details. Return 1 on success, 0 on failure. */
847 int (*to_static_tracepoint_marker_at
) (CORE_ADDR
,
848 struct static_tracepoint_marker
*marker
);
850 /* Return a vector of all tracepoints markers string id ID, or all
851 markers if ID is NULL. */
852 VEC(static_tracepoint_marker_p
) *(*to_static_tracepoint_markers_by_strid
)
855 /* Return a traceframe info object describing the current
856 traceframe's contents. If the target doesn't support
857 traceframe info, return NULL. If the current traceframe is not
858 selected (the current traceframe number is -1), the target can
859 choose to return either NULL or an empty traceframe info. If
860 NULL is returned, for example in remote target, GDB will read
861 from the live inferior. If an empty traceframe info is
862 returned, for example in tfile target, which means the
863 traceframe info is available, but the requested memory is not
864 available in it. GDB will try to see if the requested memory
865 is available in the read-only sections. This method should not
866 cache data; higher layers take care of caching, invalidating,
867 and re-fetching when necessary. */
868 struct traceframe_info
*(*to_traceframe_info
) (void);
870 /* Ask the target to use or not to use agent according to USE. Return 1
871 successful, 0 otherwise. */
872 int (*to_use_agent
) (int use
);
874 /* Is the target able to use agent in current state? */
875 int (*to_can_use_agent
) (void);
877 /* Check whether the target supports branch tracing. */
878 int (*to_supports_btrace
) (struct target_ops
*)
879 TARGET_DEFAULT_RETURN (0);
881 /* Enable branch tracing for PTID and allocate a branch trace target
882 information struct for reading and for disabling branch trace. */
883 struct btrace_target_info
*(*to_enable_btrace
) (ptid_t ptid
);
885 /* Disable branch tracing and deallocate TINFO. */
886 void (*to_disable_btrace
) (struct btrace_target_info
*tinfo
);
888 /* Disable branch tracing and deallocate TINFO. This function is similar
889 to to_disable_btrace, except that it is called during teardown and is
890 only allowed to perform actions that are safe. A counter-example would
891 be attempting to talk to a remote target. */
892 void (*to_teardown_btrace
) (struct btrace_target_info
*tinfo
);
894 /* Read branch trace data for the thread indicated by BTINFO into DATA.
895 DATA is cleared before new trace is added.
896 The branch trace will start with the most recent block and continue
897 towards older blocks. */
898 enum btrace_error (*to_read_btrace
) (VEC (btrace_block_s
) **data
,
899 struct btrace_target_info
*btinfo
,
900 enum btrace_read_type type
);
902 /* Stop trace recording. */
903 void (*to_stop_recording
) (void);
905 /* Print information about the recording. */
906 void (*to_info_record
) (void);
908 /* Save the recorded execution trace into a file. */
909 void (*to_save_record
) (const char *filename
);
911 /* Delete the recorded execution trace from the current position onwards. */
912 void (*to_delete_record
) (void);
914 /* Query if the record target is currently replaying. */
915 int (*to_record_is_replaying
) (void);
917 /* Go to the begin of the execution trace. */
918 void (*to_goto_record_begin
) (void);
920 /* Go to the end of the execution trace. */
921 void (*to_goto_record_end
) (void);
923 /* Go to a specific location in the recorded execution trace. */
924 void (*to_goto_record
) (ULONGEST insn
);
926 /* Disassemble SIZE instructions in the recorded execution trace from
927 the current position.
928 If SIZE < 0, disassemble abs (SIZE) preceding instructions; otherwise,
929 disassemble SIZE succeeding instructions. */
930 void (*to_insn_history
) (int size
, int flags
);
932 /* Disassemble SIZE instructions in the recorded execution trace around
934 If SIZE < 0, disassemble abs (SIZE) instructions before FROM; otherwise,
935 disassemble SIZE instructions after FROM. */
936 void (*to_insn_history_from
) (ULONGEST from
, int size
, int flags
);
938 /* Disassemble a section of the recorded execution trace from instruction
939 BEGIN (inclusive) to instruction END (inclusive). */
940 void (*to_insn_history_range
) (ULONGEST begin
, ULONGEST end
, int flags
);
942 /* Print a function trace of the recorded execution trace.
943 If SIZE < 0, print abs (SIZE) preceding functions; otherwise, print SIZE
944 succeeding functions. */
945 void (*to_call_history
) (int size
, int flags
);
947 /* Print a function trace of the recorded execution trace starting
949 If SIZE < 0, print abs (SIZE) functions before FROM; otherwise, print
950 SIZE functions after FROM. */
951 void (*to_call_history_from
) (ULONGEST begin
, int size
, int flags
);
953 /* Print a function trace of an execution trace section from function BEGIN
954 (inclusive) to function END (inclusive). */
955 void (*to_call_history_range
) (ULONGEST begin
, ULONGEST end
, int flags
);
957 /* Nonzero if TARGET_OBJECT_LIBRARIES_SVR4 may be read with a
959 int (*to_augmented_libraries_svr4_read
) (void);
961 /* Those unwinders are tried before any other arch unwinders. Use NULL if
963 const struct frame_unwind
*to_get_unwinder
;
964 const struct frame_unwind
*to_get_tailcall_unwinder
;
966 /* Return the number of bytes by which the PC needs to be decremented
967 after executing a breakpoint instruction.
968 Defaults to gdbarch_decr_pc_after_break (GDBARCH). */
969 CORE_ADDR (*to_decr_pc_after_break
) (struct target_ops
*ops
,
970 struct gdbarch
*gdbarch
);
973 /* Need sub-structure for target machine related rather than comm related?
977 /* Magic number for checking ops size. If a struct doesn't end with this
978 number, somebody changed the declaration but didn't change all the
979 places that initialize one. */
981 #define OPS_MAGIC 3840
983 /* The ops structure for our "current" target process. This should
984 never be NULL. If there is no target, it points to the dummy_target. */
986 extern struct target_ops current_target
;
988 /* Define easy words for doing these operations on our current target. */
990 #define target_shortname (current_target.to_shortname)
991 #define target_longname (current_target.to_longname)
993 /* Does whatever cleanup is required for a target that we are no
994 longer going to be calling. This routine is automatically always
995 called after popping the target off the target stack - the target's
996 own methods are no longer available through the target vector.
997 Closing file descriptors and freeing all memory allocated memory are
998 typical things it should do. */
1000 void target_close (struct target_ops
*targ
);
1002 /* Attaches to a process on the target side. Arguments are as passed
1003 to the `attach' command by the user. This routine can be called
1004 when the target is not on the target-stack, if the target_can_run
1005 routine returns 1; in that case, it must push itself onto the stack.
1006 Upon exit, the target should be ready for normal operations, and
1007 should be ready to deliver the status of the process immediately
1008 (without waiting) to an upcoming target_wait call. */
1010 void target_attach (char *, int);
1012 /* Some targets don't generate traps when attaching to the inferior,
1013 or their target_attach implementation takes care of the waiting.
1014 These targets must set to_attach_no_wait. */
1016 #define target_attach_no_wait \
1017 (current_target.to_attach_no_wait)
1019 /* The target_attach operation places a process under debugger control,
1020 and stops the process.
1022 This operation provides a target-specific hook that allows the
1023 necessary bookkeeping to be performed after an attach completes. */
1024 #define target_post_attach(pid) \
1025 (*current_target.to_post_attach) (¤t_target, pid)
1027 /* Takes a program previously attached to and detaches it.
1028 The program may resume execution (some targets do, some don't) and will
1029 no longer stop on signals, etc. We better not have left any breakpoints
1030 in the program or it'll die when it hits one. ARGS is arguments
1031 typed by the user (e.g. a signal to send the process). FROM_TTY
1032 says whether to be verbose or not. */
1034 extern void target_detach (const char *, int);
1036 /* Disconnect from the current target without resuming it (leaving it
1037 waiting for a debugger). */
1039 extern void target_disconnect (char *, int);
1041 /* Resume execution of the target process PTID (or a group of
1042 threads). STEP says whether to single-step or to run free; SIGGNAL
1043 is the signal to be given to the target, or GDB_SIGNAL_0 for no
1044 signal. The caller may not pass GDB_SIGNAL_DEFAULT. A specific
1045 PTID means `step/resume only this process id'. A wildcard PTID
1046 (all threads, or all threads of process) means `step/resume
1047 INFERIOR_PTID, and let other threads (for which the wildcard PTID
1048 matches) resume with their 'thread->suspend.stop_signal' signal
1049 (usually GDB_SIGNAL_0) if it is in "pass" state, or with no signal
1050 if in "no pass" state. */
1052 extern void target_resume (ptid_t ptid
, int step
, enum gdb_signal signal
);
1054 /* Wait for process pid to do something. PTID = -1 to wait for any
1055 pid to do something. Return pid of child, or -1 in case of error;
1056 store status through argument pointer STATUS. Note that it is
1057 _NOT_ OK to throw_exception() out of target_wait() without popping
1058 the debugging target from the stack; GDB isn't prepared to get back
1059 to the prompt with a debugging target but without the frame cache,
1060 stop_pc, etc., set up. OPTIONS is a bitwise OR of TARGET_W*
1063 extern ptid_t
target_wait (ptid_t ptid
, struct target_waitstatus
*status
,
1066 /* Fetch at least register REGNO, or all regs if regno == -1. No result. */
1068 extern void target_fetch_registers (struct regcache
*regcache
, int regno
);
1070 /* Store at least register REGNO, or all regs if REGNO == -1.
1071 It can store as many registers as it wants to, so target_prepare_to_store
1072 must have been previously called. Calls error() if there are problems. */
1074 extern void target_store_registers (struct regcache
*regcache
, int regs
);
1076 /* Get ready to modify the registers array. On machines which store
1077 individual registers, this doesn't need to do anything. On machines
1078 which store all the registers in one fell swoop, this makes sure
1079 that REGISTERS contains all the registers from the program being
1082 #define target_prepare_to_store(regcache) \
1083 (*current_target.to_prepare_to_store) (¤t_target, regcache)
1085 /* Determine current address space of thread PTID. */
1087 struct address_space
*target_thread_address_space (ptid_t
);
1089 /* Implement the "info proc" command. This returns one if the request
1090 was handled, and zero otherwise. It can also throw an exception if
1091 an error was encountered while attempting to handle the
1094 int target_info_proc (char *, enum info_proc_what
);
1096 /* Returns true if this target can debug multiple processes
1099 #define target_supports_multi_process() \
1100 (*current_target.to_supports_multi_process) ()
1102 /* Returns true if this target can disable address space randomization. */
1104 int target_supports_disable_randomization (void);
1106 /* Returns true if this target can enable and disable tracepoints
1107 while a trace experiment is running. */
1109 #define target_supports_enable_disable_tracepoint() \
1110 (*current_target.to_supports_enable_disable_tracepoint) ()
1112 #define target_supports_string_tracing() \
1113 (*current_target.to_supports_string_tracing) ()
1115 /* Returns true if this target can handle breakpoint conditions
1118 #define target_supports_evaluation_of_breakpoint_conditions() \
1119 (*current_target.to_supports_evaluation_of_breakpoint_conditions) ()
1121 /* Returns true if this target can handle breakpoint commands
1124 #define target_can_run_breakpoint_commands() \
1125 (*current_target.to_can_run_breakpoint_commands) ()
1127 extern int target_read_string (CORE_ADDR
, char **, int, int *);
1129 extern int target_read_memory (CORE_ADDR memaddr
, gdb_byte
*myaddr
,
1132 extern int target_read_raw_memory (CORE_ADDR memaddr
, gdb_byte
*myaddr
,
1135 extern int target_read_stack (CORE_ADDR memaddr
, gdb_byte
*myaddr
, ssize_t len
);
1137 extern int target_read_code (CORE_ADDR memaddr
, gdb_byte
*myaddr
, ssize_t len
);
1139 extern int target_write_memory (CORE_ADDR memaddr
, const gdb_byte
*myaddr
,
1142 extern int target_write_raw_memory (CORE_ADDR memaddr
, const gdb_byte
*myaddr
,
1145 /* Fetches the target's memory map. If one is found it is sorted
1146 and returned, after some consistency checking. Otherwise, NULL
1148 VEC(mem_region_s
) *target_memory_map (void);
1150 /* Erase the specified flash region. */
1151 void target_flash_erase (ULONGEST address
, LONGEST length
);
1153 /* Finish a sequence of flash operations. */
1154 void target_flash_done (void);
1156 /* Describes a request for a memory write operation. */
1157 struct memory_write_request
1159 /* Begining address that must be written. */
1161 /* Past-the-end address. */
1163 /* The data to write. */
1165 /* A callback baton for progress reporting for this request. */
1168 typedef struct memory_write_request memory_write_request_s
;
1169 DEF_VEC_O(memory_write_request_s
);
1171 /* Enumeration specifying different flash preservation behaviour. */
1172 enum flash_preserve_mode
1178 /* Write several memory blocks at once. This version can be more
1179 efficient than making several calls to target_write_memory, in
1180 particular because it can optimize accesses to flash memory.
1182 Moreover, this is currently the only memory access function in gdb
1183 that supports writing to flash memory, and it should be used for
1184 all cases where access to flash memory is desirable.
1186 REQUESTS is the vector (see vec.h) of memory_write_request.
1187 PRESERVE_FLASH_P indicates what to do with blocks which must be
1188 erased, but not completely rewritten.
1189 PROGRESS_CB is a function that will be periodically called to provide
1190 feedback to user. It will be called with the baton corresponding
1191 to the request currently being written. It may also be called
1192 with a NULL baton, when preserved flash sectors are being rewritten.
1194 The function returns 0 on success, and error otherwise. */
1195 int target_write_memory_blocks (VEC(memory_write_request_s
) *requests
,
1196 enum flash_preserve_mode preserve_flash_p
,
1197 void (*progress_cb
) (ULONGEST
, void *));
1199 /* Print a line about the current target. */
1201 #define target_files_info() \
1202 (*current_target.to_files_info) (¤t_target)
1204 /* Insert a hardware breakpoint at address BP_TGT->placed_address in
1205 the target machine. Returns 0 for success, and returns non-zero or
1206 throws an error (with a detailed failure reason error code and
1207 message) otherwise. */
1209 extern int target_insert_breakpoint (struct gdbarch
*gdbarch
,
1210 struct bp_target_info
*bp_tgt
);
1212 /* Remove a breakpoint at address BP_TGT->placed_address in the target
1213 machine. Result is 0 for success, non-zero for error. */
1215 extern int target_remove_breakpoint (struct gdbarch
*gdbarch
,
1216 struct bp_target_info
*bp_tgt
);
1218 /* Initialize the terminal settings we record for the inferior,
1219 before we actually run the inferior. */
1221 #define target_terminal_init() \
1222 (*current_target.to_terminal_init) ()
1224 /* Put the inferior's terminal settings into effect.
1225 This is preparation for starting or resuming the inferior. */
1227 extern void target_terminal_inferior (void);
1229 /* Put some of our terminal settings into effect,
1230 enough to get proper results from our output,
1231 but do not change into or out of RAW mode
1232 so that no input is discarded.
1234 After doing this, either terminal_ours or terminal_inferior
1235 should be called to get back to a normal state of affairs. */
1237 #define target_terminal_ours_for_output() \
1238 (*current_target.to_terminal_ours_for_output) ()
1240 /* Put our terminal settings into effect.
1241 First record the inferior's terminal settings
1242 so they can be restored properly later. */
1244 #define target_terminal_ours() \
1245 (*current_target.to_terminal_ours) ()
1247 /* Save our terminal settings.
1248 This is called from TUI after entering or leaving the curses
1249 mode. Since curses modifies our terminal this call is here
1250 to take this change into account. */
1252 #define target_terminal_save_ours() \
1253 (*current_target.to_terminal_save_ours) ()
1255 /* Print useful information about our terminal status, if such a thing
1258 #define target_terminal_info(arg, from_tty) \
1259 (*current_target.to_terminal_info) (arg, from_tty)
1261 /* Kill the inferior process. Make it go away. */
1263 extern void target_kill (void);
1265 /* Load an executable file into the target process. This is expected
1266 to not only bring new code into the target process, but also to
1267 update GDB's symbol tables to match.
1269 ARG contains command-line arguments, to be broken down with
1270 buildargv (). The first non-switch argument is the filename to
1271 load, FILE; the second is a number (as parsed by strtoul (..., ...,
1272 0)), which is an offset to apply to the load addresses of FILE's
1273 sections. The target may define switches, or other non-switch
1274 arguments, as it pleases. */
1276 extern void target_load (char *arg
, int from_tty
);
1278 /* Start an inferior process and set inferior_ptid to its pid.
1279 EXEC_FILE is the file to run.
1280 ALLARGS is a string containing the arguments to the program.
1281 ENV is the environment vector to pass. Errors reported with error().
1282 On VxWorks and various standalone systems, we ignore exec_file. */
1284 void target_create_inferior (char *exec_file
, char *args
,
1285 char **env
, int from_tty
);
1287 /* Some targets (such as ttrace-based HPUX) don't allow us to request
1288 notification of inferior events such as fork and vork immediately
1289 after the inferior is created. (This because of how gdb gets an
1290 inferior created via invoking a shell to do it. In such a scenario,
1291 if the shell init file has commands in it, the shell will fork and
1292 exec for each of those commands, and we will see each such fork
1295 Such targets will supply an appropriate definition for this function. */
1297 #define target_post_startup_inferior(ptid) \
1298 (*current_target.to_post_startup_inferior) (ptid)
1300 /* On some targets, we can catch an inferior fork or vfork event when
1301 it occurs. These functions insert/remove an already-created
1302 catchpoint for such events. They return 0 for success, 1 if the
1303 catchpoint type is not supported and -1 for failure. */
1305 #define target_insert_fork_catchpoint(pid) \
1306 (*current_target.to_insert_fork_catchpoint) (pid)
1308 #define target_remove_fork_catchpoint(pid) \
1309 (*current_target.to_remove_fork_catchpoint) (pid)
1311 #define target_insert_vfork_catchpoint(pid) \
1312 (*current_target.to_insert_vfork_catchpoint) (pid)
1314 #define target_remove_vfork_catchpoint(pid) \
1315 (*current_target.to_remove_vfork_catchpoint) (pid)
1317 /* If the inferior forks or vforks, this function will be called at
1318 the next resume in order to perform any bookkeeping and fiddling
1319 necessary to continue debugging either the parent or child, as
1320 requested, and releasing the other. Information about the fork
1321 or vfork event is available via get_last_target_status ().
1322 This function returns 1 if the inferior should not be resumed
1323 (i.e. there is another event pending). */
1325 int target_follow_fork (int follow_child
, int detach_fork
);
1327 /* On some targets, we can catch an inferior exec event when it
1328 occurs. These functions insert/remove an already-created
1329 catchpoint for such events. They return 0 for success, 1 if the
1330 catchpoint type is not supported and -1 for failure. */
1332 #define target_insert_exec_catchpoint(pid) \
1333 (*current_target.to_insert_exec_catchpoint) (pid)
1335 #define target_remove_exec_catchpoint(pid) \
1336 (*current_target.to_remove_exec_catchpoint) (pid)
1340 NEEDED is nonzero if any syscall catch (of any kind) is requested.
1341 If NEEDED is zero, it means the target can disable the mechanism to
1342 catch system calls because there are no more catchpoints of this type.
1344 ANY_COUNT is nonzero if a generic (filter-less) syscall catch is
1345 being requested. In this case, both TABLE_SIZE and TABLE should
1348 TABLE_SIZE is the number of elements in TABLE. It only matters if
1351 TABLE is an array of ints, indexed by syscall number. An element in
1352 this array is nonzero if that syscall should be caught. This argument
1353 only matters if ANY_COUNT is zero.
1355 Return 0 for success, 1 if syscall catchpoints are not supported or -1
1358 #define target_set_syscall_catchpoint(pid, needed, any_count, table_size, table) \
1359 (*current_target.to_set_syscall_catchpoint) (pid, needed, any_count, \
1362 /* Returns TRUE if PID has exited. And, also sets EXIT_STATUS to the
1363 exit code of PID, if any. */
1365 #define target_has_exited(pid,wait_status,exit_status) \
1366 (*current_target.to_has_exited) (pid,wait_status,exit_status)
1368 /* The debugger has completed a blocking wait() call. There is now
1369 some process event that must be processed. This function should
1370 be defined by those targets that require the debugger to perform
1371 cleanup or internal state changes in response to the process event. */
1373 /* The inferior process has died. Do what is right. */
1375 void target_mourn_inferior (void);
1377 /* Does target have enough data to do a run or attach command? */
1379 #define target_can_run(t) \
1380 ((t)->to_can_run) ()
1382 /* Set list of signals to be handled in the target.
1384 PASS_SIGNALS is an array of size NSIG, indexed by target signal number
1385 (enum gdb_signal). For every signal whose entry in this array is
1386 non-zero, the target is allowed -but not required- to skip reporting
1387 arrival of the signal to the GDB core by returning from target_wait,
1388 and to pass the signal directly to the inferior instead.
1390 However, if the target is hardware single-stepping a thread that is
1391 about to receive a signal, it needs to be reported in any case, even
1392 if mentioned in a previous target_pass_signals call. */
1394 extern void target_pass_signals (int nsig
, unsigned char *pass_signals
);
1396 /* Set list of signals the target may pass to the inferior. This
1397 directly maps to the "handle SIGNAL pass/nopass" setting.
1399 PROGRAM_SIGNALS is an array of size NSIG, indexed by target signal
1400 number (enum gdb_signal). For every signal whose entry in this
1401 array is non-zero, the target is allowed to pass the signal to the
1402 inferior. Signals not present in the array shall be silently
1403 discarded. This does not influence whether to pass signals to the
1404 inferior as a result of a target_resume call. This is useful in
1405 scenarios where the target needs to decide whether to pass or not a
1406 signal to the inferior without GDB core involvement, such as for
1407 example, when detaching (as threads may have been suspended with
1408 pending signals not reported to GDB). */
1410 extern void target_program_signals (int nsig
, unsigned char *program_signals
);
1412 /* Check to see if a thread is still alive. */
1414 extern int target_thread_alive (ptid_t ptid
);
1416 /* Query for new threads and add them to the thread list. */
1418 extern void target_find_new_threads (void);
1420 /* Make target stop in a continuable fashion. (For instance, under
1421 Unix, this should act like SIGSTOP). This function is normally
1422 used by GUIs to implement a stop button. */
1424 extern void target_stop (ptid_t ptid
);
1426 /* Send the specified COMMAND to the target's monitor
1427 (shell,interpreter) for execution. The result of the query is
1428 placed in OUTBUF. */
1430 #define target_rcmd(command, outbuf) \
1431 (*current_target.to_rcmd) (command, outbuf)
1434 /* Does the target include all of memory, or only part of it? This
1435 determines whether we look up the target chain for other parts of
1436 memory if this target can't satisfy a request. */
1438 extern int target_has_all_memory_1 (void);
1439 #define target_has_all_memory target_has_all_memory_1 ()
1441 /* Does the target include memory? (Dummy targets don't.) */
1443 extern int target_has_memory_1 (void);
1444 #define target_has_memory target_has_memory_1 ()
1446 /* Does the target have a stack? (Exec files don't, VxWorks doesn't, until
1447 we start a process.) */
1449 extern int target_has_stack_1 (void);
1450 #define target_has_stack target_has_stack_1 ()
1452 /* Does the target have registers? (Exec files don't.) */
1454 extern int target_has_registers_1 (void);
1455 #define target_has_registers target_has_registers_1 ()
1457 /* Does the target have execution? Can we make it jump (through
1458 hoops), or pop its stack a few times? This means that the current
1459 target is currently executing; for some targets, that's the same as
1460 whether or not the target is capable of execution, but there are
1461 also targets which can be current while not executing. In that
1462 case this will become true after target_create_inferior or
1465 extern int target_has_execution_1 (ptid_t
);
1467 /* Like target_has_execution_1, but always passes inferior_ptid. */
1469 extern int target_has_execution_current (void);
1471 #define target_has_execution target_has_execution_current ()
1473 /* Default implementations for process_stratum targets. Return true
1474 if there's a selected inferior, false otherwise. */
1476 extern int default_child_has_all_memory (struct target_ops
*ops
);
1477 extern int default_child_has_memory (struct target_ops
*ops
);
1478 extern int default_child_has_stack (struct target_ops
*ops
);
1479 extern int default_child_has_registers (struct target_ops
*ops
);
1480 extern int default_child_has_execution (struct target_ops
*ops
,
1483 /* Can the target support the debugger control of thread execution?
1484 Can it lock the thread scheduler? */
1486 #define target_can_lock_scheduler \
1487 (current_target.to_has_thread_control & tc_schedlock)
1489 /* Should the target enable async mode if it is supported? Temporary
1490 cludge until async mode is a strict superset of sync mode. */
1491 extern int target_async_permitted
;
1493 /* Can the target support asynchronous execution? */
1494 #define target_can_async_p() (current_target.to_can_async_p (¤t_target))
1496 /* Is the target in asynchronous execution mode? */
1497 #define target_is_async_p() (current_target.to_is_async_p (¤t_target))
1499 int target_supports_non_stop (void);
1501 /* Put the target in async mode with the specified callback function. */
1502 #define target_async(CALLBACK,CONTEXT) \
1503 (current_target.to_async (¤t_target, (CALLBACK), (CONTEXT)))
1505 #define target_execution_direction() \
1506 (current_target.to_execution_direction ())
1508 /* Converts a process id to a string. Usually, the string just contains
1509 `process xyz', but on some systems it may contain
1510 `process xyz thread abc'. */
1512 extern char *target_pid_to_str (ptid_t ptid
);
1514 extern char *normal_pid_to_str (ptid_t ptid
);
1516 /* Return a short string describing extra information about PID,
1517 e.g. "sleeping", "runnable", "running on LWP 3". Null return value
1520 #define target_extra_thread_info(TP) \
1521 (current_target.to_extra_thread_info (TP))
1523 /* Return the thread's name. A NULL result means that the target
1524 could not determine this thread's name. */
1526 extern char *target_thread_name (struct thread_info
*);
1528 /* Attempts to find the pathname of the executable file
1529 that was run to create a specified process.
1531 The process PID must be stopped when this operation is used.
1533 If the executable file cannot be determined, NULL is returned.
1535 Else, a pointer to a character string containing the pathname
1536 is returned. This string should be copied into a buffer by
1537 the client if the string will not be immediately used, or if
1540 #define target_pid_to_exec_file(pid) \
1541 (current_target.to_pid_to_exec_file) (pid)
1543 /* See the to_thread_architecture description in struct target_ops. */
1545 #define target_thread_architecture(ptid) \
1546 (current_target.to_thread_architecture (¤t_target, ptid))
1549 * Iterator function for target memory regions.
1550 * Calls a callback function once for each memory region 'mapped'
1551 * in the child process. Defined as a simple macro rather than
1552 * as a function macro so that it can be tested for nullity.
1555 #define target_find_memory_regions(FUNC, DATA) \
1556 (current_target.to_find_memory_regions) (FUNC, DATA)
1559 * Compose corefile .note section.
1562 #define target_make_corefile_notes(BFD, SIZE_P) \
1563 (current_target.to_make_corefile_notes) (BFD, SIZE_P)
1565 /* Bookmark interfaces. */
1566 #define target_get_bookmark(ARGS, FROM_TTY) \
1567 (current_target.to_get_bookmark) (ARGS, FROM_TTY)
1569 #define target_goto_bookmark(ARG, FROM_TTY) \
1570 (current_target.to_goto_bookmark) (ARG, FROM_TTY)
1572 /* Hardware watchpoint interfaces. */
1574 /* Returns non-zero if we were stopped by a hardware watchpoint (memory read or
1575 write). Only the INFERIOR_PTID task is being queried. */
1577 #define target_stopped_by_watchpoint() \
1578 ((*current_target.to_stopped_by_watchpoint) (¤t_target))
1580 /* Non-zero if we have steppable watchpoints */
1582 #define target_have_steppable_watchpoint \
1583 (current_target.to_have_steppable_watchpoint)
1585 /* Non-zero if we have continuable watchpoints */
1587 #define target_have_continuable_watchpoint \
1588 (current_target.to_have_continuable_watchpoint)
1590 /* Provide defaults for hardware watchpoint functions. */
1592 /* If the *_hw_beakpoint functions have not been defined
1593 elsewhere use the definitions in the target vector. */
1595 /* Returns non-zero if we can set a hardware watchpoint of type TYPE. TYPE is
1596 one of bp_hardware_watchpoint, bp_read_watchpoint, bp_write_watchpoint, or
1597 bp_hardware_breakpoint. CNT is the number of such watchpoints used so far
1598 (including this one?). OTHERTYPE is who knows what... */
1600 #define target_can_use_hardware_watchpoint(TYPE,CNT,OTHERTYPE) \
1601 (*current_target.to_can_use_hw_breakpoint) (¤t_target, \
1602 TYPE, CNT, OTHERTYPE);
1604 /* Returns the number of debug registers needed to watch the given
1605 memory region, or zero if not supported. */
1607 #define target_region_ok_for_hw_watchpoint(addr, len) \
1608 (*current_target.to_region_ok_for_hw_watchpoint) (addr, len)
1611 /* Set/clear a hardware watchpoint starting at ADDR, for LEN bytes.
1612 TYPE is 0 for write, 1 for read, and 2 for read/write accesses.
1613 COND is the expression for its condition, or NULL if there's none.
1614 Returns 0 for success, 1 if the watchpoint type is not supported,
1617 #define target_insert_watchpoint(addr, len, type, cond) \
1618 (*current_target.to_insert_watchpoint) (addr, len, type, cond)
1620 #define target_remove_watchpoint(addr, len, type, cond) \
1621 (*current_target.to_remove_watchpoint) (¤t_target, \
1622 addr, len, type, cond)
1624 /* Insert a new masked watchpoint at ADDR using the mask MASK.
1625 RW may be hw_read for a read watchpoint, hw_write for a write watchpoint
1626 or hw_access for an access watchpoint. Returns 0 for success, 1 if
1627 masked watchpoints are not supported, -1 for failure. */
1629 extern int target_insert_mask_watchpoint (CORE_ADDR
, CORE_ADDR
, int);
1631 /* Remove a masked watchpoint at ADDR with the mask MASK.
1632 RW may be hw_read for a read watchpoint, hw_write for a write watchpoint
1633 or hw_access for an access watchpoint. Returns 0 for success, non-zero
1636 extern int target_remove_mask_watchpoint (CORE_ADDR
, CORE_ADDR
, int);
1638 /* Insert a hardware breakpoint at address BP_TGT->placed_address in
1639 the target machine. Returns 0 for success, and returns non-zero or
1640 throws an error (with a detailed failure reason error code and
1641 message) otherwise. */
1643 #define target_insert_hw_breakpoint(gdbarch, bp_tgt) \
1644 (*current_target.to_insert_hw_breakpoint) (¤t_target, \
1647 #define target_remove_hw_breakpoint(gdbarch, bp_tgt) \
1648 (*current_target.to_remove_hw_breakpoint) (¤t_target, \
1651 /* Return number of debug registers needed for a ranged breakpoint,
1652 or -1 if ranged breakpoints are not supported. */
1654 extern int target_ranged_break_num_registers (void);
1656 /* Return non-zero if target knows the data address which triggered this
1657 target_stopped_by_watchpoint, in such case place it to *ADDR_P. Only the
1658 INFERIOR_PTID task is being queried. */
1659 #define target_stopped_data_address(target, addr_p) \
1660 (*target.to_stopped_data_address) (target, addr_p)
1662 /* Return non-zero if ADDR is within the range of a watchpoint spanning
1663 LENGTH bytes beginning at START. */
1664 #define target_watchpoint_addr_within_range(target, addr, start, length) \
1665 (*target.to_watchpoint_addr_within_range) (target, addr, start, length)
1667 /* Return non-zero if the target is capable of using hardware to evaluate
1668 the condition expression. In this case, if the condition is false when
1669 the watched memory location changes, execution may continue without the
1670 debugger being notified.
1672 Due to limitations in the hardware implementation, it may be capable of
1673 avoiding triggering the watchpoint in some cases where the condition
1674 expression is false, but may report some false positives as well.
1675 For this reason, GDB will still evaluate the condition expression when
1676 the watchpoint triggers. */
1677 #define target_can_accel_watchpoint_condition(addr, len, type, cond) \
1678 (*current_target.to_can_accel_watchpoint_condition) (addr, len, type, cond)
1680 /* Return number of debug registers needed for a masked watchpoint,
1681 -1 if masked watchpoints are not supported or -2 if the given address
1682 and mask combination cannot be used. */
1684 extern int target_masked_watch_num_registers (CORE_ADDR addr
, CORE_ADDR mask
);
1686 /* Target can execute in reverse? */
1687 #define target_can_execute_reverse \
1688 (current_target.to_can_execute_reverse ? \
1689 current_target.to_can_execute_reverse () : 0)
1691 extern const struct target_desc
*target_read_description (struct target_ops
*);
1693 #define target_get_ada_task_ptid(lwp, tid) \
1694 (*current_target.to_get_ada_task_ptid) (lwp,tid)
1696 /* Utility implementation of searching memory. */
1697 extern int simple_search_memory (struct target_ops
* ops
,
1698 CORE_ADDR start_addr
,
1699 ULONGEST search_space_len
,
1700 const gdb_byte
*pattern
,
1701 ULONGEST pattern_len
,
1702 CORE_ADDR
*found_addrp
);
1704 /* Main entry point for searching memory. */
1705 extern int target_search_memory (CORE_ADDR start_addr
,
1706 ULONGEST search_space_len
,
1707 const gdb_byte
*pattern
,
1708 ULONGEST pattern_len
,
1709 CORE_ADDR
*found_addrp
);
1711 /* Target file operations. */
1713 /* Open FILENAME on the target, using FLAGS and MODE. Return a
1714 target file descriptor, or -1 if an error occurs (and set
1716 extern int target_fileio_open (const char *filename
, int flags
, int mode
,
1719 /* Write up to LEN bytes from WRITE_BUF to FD on the target.
1720 Return the number of bytes written, or -1 if an error occurs
1721 (and set *TARGET_ERRNO). */
1722 extern int target_fileio_pwrite (int fd
, const gdb_byte
*write_buf
, int len
,
1723 ULONGEST offset
, int *target_errno
);
1725 /* Read up to LEN bytes FD on the target into READ_BUF.
1726 Return the number of bytes read, or -1 if an error occurs
1727 (and set *TARGET_ERRNO). */
1728 extern int target_fileio_pread (int fd
, gdb_byte
*read_buf
, int len
,
1729 ULONGEST offset
, int *target_errno
);
1731 /* Close FD on the target. Return 0, or -1 if an error occurs
1732 (and set *TARGET_ERRNO). */
1733 extern int target_fileio_close (int fd
, int *target_errno
);
1735 /* Unlink FILENAME on the target. Return 0, or -1 if an error
1736 occurs (and set *TARGET_ERRNO). */
1737 extern int target_fileio_unlink (const char *filename
, int *target_errno
);
1739 /* Read value of symbolic link FILENAME on the target. Return a
1740 null-terminated string allocated via xmalloc, or NULL if an error
1741 occurs (and set *TARGET_ERRNO). */
1742 extern char *target_fileio_readlink (const char *filename
, int *target_errno
);
1744 /* Read target file FILENAME. The return value will be -1 if the transfer
1745 fails or is not supported; 0 if the object is empty; or the length
1746 of the object otherwise. If a positive value is returned, a
1747 sufficiently large buffer will be allocated using xmalloc and
1748 returned in *BUF_P containing the contents of the object.
1750 This method should be used for objects sufficiently small to store
1751 in a single xmalloc'd buffer, when no fixed bound on the object's
1752 size is known in advance. */
1753 extern LONGEST
target_fileio_read_alloc (const char *filename
,
1756 /* Read target file FILENAME. The result is NUL-terminated and
1757 returned as a string, allocated using xmalloc. If an error occurs
1758 or the transfer is unsupported, NULL is returned. Empty objects
1759 are returned as allocated but empty strings. A warning is issued
1760 if the result contains any embedded NUL bytes. */
1761 extern char *target_fileio_read_stralloc (const char *filename
);
1764 /* Tracepoint-related operations. */
1766 #define target_trace_init() \
1767 (*current_target.to_trace_init) ()
1769 #define target_download_tracepoint(t) \
1770 (*current_target.to_download_tracepoint) (t)
1772 #define target_can_download_tracepoint() \
1773 (*current_target.to_can_download_tracepoint) ()
1775 #define target_download_trace_state_variable(tsv) \
1776 (*current_target.to_download_trace_state_variable) (tsv)
1778 #define target_enable_tracepoint(loc) \
1779 (*current_target.to_enable_tracepoint) (loc)
1781 #define target_disable_tracepoint(loc) \
1782 (*current_target.to_disable_tracepoint) (loc)
1784 #define target_trace_start() \
1785 (*current_target.to_trace_start) ()
1787 #define target_trace_set_readonly_regions() \
1788 (*current_target.to_trace_set_readonly_regions) ()
1790 #define target_get_trace_status(ts) \
1791 (*current_target.to_get_trace_status) (ts)
1793 #define target_get_tracepoint_status(tp,utp) \
1794 (*current_target.to_get_tracepoint_status) (tp, utp)
1796 #define target_trace_stop() \
1797 (*current_target.to_trace_stop) ()
1799 #define target_trace_find(type,num,addr1,addr2,tpp) \
1800 (*current_target.to_trace_find) ((type), (num), (addr1), (addr2), (tpp))
1802 #define target_get_trace_state_variable_value(tsv,val) \
1803 (*current_target.to_get_trace_state_variable_value) ((tsv), (val))
1805 #define target_save_trace_data(filename) \
1806 (*current_target.to_save_trace_data) (filename)
1808 #define target_upload_tracepoints(utpp) \
1809 (*current_target.to_upload_tracepoints) (utpp)
1811 #define target_upload_trace_state_variables(utsvp) \
1812 (*current_target.to_upload_trace_state_variables) (utsvp)
1814 #define target_get_raw_trace_data(buf,offset,len) \
1815 (*current_target.to_get_raw_trace_data) ((buf), (offset), (len))
1817 #define target_get_min_fast_tracepoint_insn_len() \
1818 (*current_target.to_get_min_fast_tracepoint_insn_len) ()
1820 #define target_set_disconnected_tracing(val) \
1821 (*current_target.to_set_disconnected_tracing) (val)
1823 #define target_set_circular_trace_buffer(val) \
1824 (*current_target.to_set_circular_trace_buffer) (val)
1826 #define target_set_trace_buffer_size(val) \
1827 (*current_target.to_set_trace_buffer_size) (val)
1829 #define target_set_trace_notes(user,notes,stopnotes) \
1830 (*current_target.to_set_trace_notes) ((user), (notes), (stopnotes))
1832 #define target_get_tib_address(ptid, addr) \
1833 (*current_target.to_get_tib_address) ((ptid), (addr))
1835 #define target_set_permissions() \
1836 (*current_target.to_set_permissions) ()
1838 #define target_static_tracepoint_marker_at(addr, marker) \
1839 (*current_target.to_static_tracepoint_marker_at) (addr, marker)
1841 #define target_static_tracepoint_markers_by_strid(marker_id) \
1842 (*current_target.to_static_tracepoint_markers_by_strid) (marker_id)
1844 #define target_traceframe_info() \
1845 (*current_target.to_traceframe_info) ()
1847 #define target_use_agent(use) \
1848 (*current_target.to_use_agent) (use)
1850 #define target_can_use_agent() \
1851 (*current_target.to_can_use_agent) ()
1853 #define target_augmented_libraries_svr4_read() \
1854 (*current_target.to_augmented_libraries_svr4_read) ()
1856 /* Command logging facility. */
1858 #define target_log_command(p) \
1860 if (current_target.to_log_command) \
1861 (*current_target.to_log_command) (p); \
1865 extern int target_core_of_thread (ptid_t ptid
);
1867 /* See to_get_unwinder in struct target_ops. */
1868 extern const struct frame_unwind
*target_get_unwinder (void);
1870 /* See to_get_tailcall_unwinder in struct target_ops. */
1871 extern const struct frame_unwind
*target_get_tailcall_unwinder (void);
1873 /* Verify that the memory in the [MEMADDR, MEMADDR+SIZE) range matches
1874 the contents of [DATA,DATA+SIZE). Returns 1 if there's a match, 0
1875 if there's a mismatch, and -1 if an error is encountered while
1876 reading memory. Throws an error if the functionality is found not
1877 to be supported by the current target. */
1878 int target_verify_memory (const gdb_byte
*data
,
1879 CORE_ADDR memaddr
, ULONGEST size
);
1881 /* Routines for maintenance of the target structures...
1883 complete_target_initialization: Finalize a target_ops by filling in
1884 any fields needed by the target implementation.
1886 add_target: Add a target to the list of all possible targets.
1888 push_target: Make this target the top of the stack of currently used
1889 targets, within its particular stratum of the stack. Result
1890 is 0 if now atop the stack, nonzero if not on top (maybe
1893 unpush_target: Remove this from the stack of currently used targets,
1894 no matter where it is on the list. Returns 0 if no
1895 change, 1 if removed from stack. */
1897 extern void add_target (struct target_ops
*);
1899 extern void add_target_with_completer (struct target_ops
*t
,
1900 completer_ftype
*completer
);
1902 extern void complete_target_initialization (struct target_ops
*t
);
1904 /* Adds a command ALIAS for target T and marks it deprecated. This is useful
1905 for maintaining backwards compatibility when renaming targets. */
1907 extern void add_deprecated_target_alias (struct target_ops
*t
, char *alias
);
1909 extern void push_target (struct target_ops
*);
1911 extern int unpush_target (struct target_ops
*);
1913 extern void target_pre_inferior (int);
1915 extern void target_preopen (int);
1917 /* Does whatever cleanup is required to get rid of all pushed targets. */
1918 extern void pop_all_targets (void);
1920 /* Like pop_all_targets, but pops only targets whose stratum is
1921 strictly above ABOVE_STRATUM. */
1922 extern void pop_all_targets_above (enum strata above_stratum
);
1924 extern int target_is_pushed (struct target_ops
*t
);
1926 extern CORE_ADDR
target_translate_tls_address (struct objfile
*objfile
,
1929 /* Struct target_section maps address ranges to file sections. It is
1930 mostly used with BFD files, but can be used without (e.g. for handling
1931 raw disks, or files not in formats handled by BFD). */
1933 struct target_section
1935 CORE_ADDR addr
; /* Lowest address in section */
1936 CORE_ADDR endaddr
; /* 1+highest address in section */
1938 struct bfd_section
*the_bfd_section
;
1940 /* The "owner" of the section.
1941 It can be any unique value. It is set by add_target_sections
1942 and used by remove_target_sections.
1943 For example, for executables it is a pointer to exec_bfd and
1944 for shlibs it is the so_list pointer. */
1948 /* Holds an array of target sections. Defined by [SECTIONS..SECTIONS_END[. */
1950 struct target_section_table
1952 struct target_section
*sections
;
1953 struct target_section
*sections_end
;
1956 /* Return the "section" containing the specified address. */
1957 struct target_section
*target_section_by_addr (struct target_ops
*target
,
1960 /* Return the target section table this target (or the targets
1961 beneath) currently manipulate. */
1963 extern struct target_section_table
*target_get_section_table
1964 (struct target_ops
*target
);
1966 /* From mem-break.c */
1968 extern int memory_remove_breakpoint (struct target_ops
*, struct gdbarch
*,
1969 struct bp_target_info
*);
1971 extern int memory_insert_breakpoint (struct target_ops
*, struct gdbarch
*,
1972 struct bp_target_info
*);
1974 extern int default_memory_remove_breakpoint (struct gdbarch
*,
1975 struct bp_target_info
*);
1977 extern int default_memory_insert_breakpoint (struct gdbarch
*,
1978 struct bp_target_info
*);
1983 extern void initialize_targets (void);
1985 extern void noprocess (void) ATTRIBUTE_NORETURN
;
1987 extern void target_require_runnable (void);
1989 extern void find_default_attach (struct target_ops
*, char *, int);
1991 extern void find_default_create_inferior (struct target_ops
*,
1992 char *, char *, char **, int);
1994 extern struct target_ops
*find_target_beneath (struct target_ops
*);
1996 /* Find the target at STRATUM. If no target is at that stratum,
1999 struct target_ops
*find_target_at (enum strata stratum
);
2001 /* Read OS data object of type TYPE from the target, and return it in
2002 XML format. The result is NUL-terminated and returned as a string,
2003 allocated using xmalloc. If an error occurs or the transfer is
2004 unsupported, NULL is returned. Empty objects are returned as
2005 allocated but empty strings. */
2007 extern char *target_get_osdata (const char *type
);
2010 /* Stuff that should be shared among the various remote targets. */
2012 /* Debugging level. 0 is off, and non-zero values mean to print some debug
2013 information (higher values, more information). */
2014 extern int remote_debug
;
2016 /* Speed in bits per second, or -1 which means don't mess with the speed. */
2017 extern int baud_rate
;
2018 /* Timeout limit for response from target. */
2019 extern int remote_timeout
;
2023 /* Set the show memory breakpoints mode to show, and installs a cleanup
2024 to restore it back to the current value. */
2025 extern struct cleanup
*make_show_memory_breakpoints_cleanup (int show
);
2027 extern int may_write_registers
;
2028 extern int may_write_memory
;
2029 extern int may_insert_breakpoints
;
2030 extern int may_insert_tracepoints
;
2031 extern int may_insert_fast_tracepoints
;
2032 extern int may_stop
;
2034 extern void update_target_permissions (void);
2037 /* Imported from machine dependent code. */
2039 /* Blank target vector entries are initialized to target_ignore. */
2040 void target_ignore (void);
2042 /* See to_supports_btrace in struct target_ops. */
2043 #define target_supports_btrace() \
2044 (current_target.to_supports_btrace (¤t_target))
2046 /* See to_enable_btrace in struct target_ops. */
2047 extern struct btrace_target_info
*target_enable_btrace (ptid_t ptid
);
2049 /* See to_disable_btrace in struct target_ops. */
2050 extern void target_disable_btrace (struct btrace_target_info
*btinfo
);
2052 /* See to_teardown_btrace in struct target_ops. */
2053 extern void target_teardown_btrace (struct btrace_target_info
*btinfo
);
2055 /* See to_read_btrace in struct target_ops. */
2056 extern enum btrace_error
target_read_btrace (VEC (btrace_block_s
) **,
2057 struct btrace_target_info
*,
2058 enum btrace_read_type
);
2060 /* See to_stop_recording in struct target_ops. */
2061 extern void target_stop_recording (void);
2063 /* See to_info_record in struct target_ops. */
2064 extern void target_info_record (void);
2066 /* See to_save_record in struct target_ops. */
2067 extern void target_save_record (const char *filename
);
2069 /* Query if the target supports deleting the execution log. */
2070 extern int target_supports_delete_record (void);
2072 /* See to_delete_record in struct target_ops. */
2073 extern void target_delete_record (void);
2075 /* See to_record_is_replaying in struct target_ops. */
2076 extern int target_record_is_replaying (void);
2078 /* See to_goto_record_begin in struct target_ops. */
2079 extern void target_goto_record_begin (void);
2081 /* See to_goto_record_end in struct target_ops. */
2082 extern void target_goto_record_end (void);
2084 /* See to_goto_record in struct target_ops. */
2085 extern void target_goto_record (ULONGEST insn
);
2087 /* See to_insn_history. */
2088 extern void target_insn_history (int size
, int flags
);
2090 /* See to_insn_history_from. */
2091 extern void target_insn_history_from (ULONGEST from
, int size
, int flags
);
2093 /* See to_insn_history_range. */
2094 extern void target_insn_history_range (ULONGEST begin
, ULONGEST end
, int flags
);
2096 /* See to_call_history. */
2097 extern void target_call_history (int size
, int flags
);
2099 /* See to_call_history_from. */
2100 extern void target_call_history_from (ULONGEST begin
, int size
, int flags
);
2102 /* See to_call_history_range. */
2103 extern void target_call_history_range (ULONGEST begin
, ULONGEST end
, int flags
);
2105 /* See to_decr_pc_after_break. Start searching for the target at OPS. */
2106 extern CORE_ADDR
forward_target_decr_pc_after_break (struct target_ops
*ops
,
2107 struct gdbarch
*gdbarch
);
2109 /* See to_decr_pc_after_break. */
2110 extern CORE_ADDR
target_decr_pc_after_break (struct gdbarch
*gdbarch
);
2112 #endif /* !defined (TARGET_H) */