Merge branch 'bc/run-command-nullness-after-free-fix' into maint

[thirdparty/git.git] / git-gui / lib / status_bar.tcl

# git-gui status bar mega-widget
# Copyright (C) 2007 Shawn Pearce

# The status_bar class manages the entire status bar. It is possible for
# multiple overlapping asynchronous operations to want to display status
# simultaneously. Each one receives a status_bar_operation when it calls the
# start method, and the status bar combines all active operations into the
# line of text it displays. Most of the time, there will be at most one
# ongoing operation.
#
# Note that the entire status bar can be either in single-line or two-line
# mode, depending on the constructor. Multiple active operations are only
# supported for single-line status bars.

class status_bar {

field allow_multiple ; # configured at construction

field w         ; # our own window path
field w_l       ; # text widget we draw messages into
field w_c       ; # canvas we draw a progress bar into
field c_pack    ; # script to pack the canvas with

field baseline_text   ; # text to show if there are no operations
field status_bar_text ; # combined text for all operations

field operations ; # list of current ongoing operations

# The status bar can display a progress bar, updated when consumers call the
# update method on their status_bar_operation. When there are multiple
# operations, the status bar shows the combined status of all operations.
#
# When an overlapping operation completes, the progress bar is going to
# abruptly have one fewer operation in the calculation, causing a discontinuity.
# Therefore, whenever an operation completes, if it is not the last operation,
# this counter is increased, and the progress bar is calculated as though there
# were still another operation at 100%. When the last operation completes, this
# is reset to 0.
field completed_operation_count

constructor new {path} {
        global use_ttk NS
        set w $path
        set w_l $w.l
        set w_c $w.c

        # Standard single-line status bar: Permit overlapping operations
        set allow_multiple 1

        set baseline_text ""
        set operations [list]
        set completed_operation_count 0

        ${NS}::frame $w
        if {!$use_ttk} {
                $w configure -borderwidth 1 -relief sunken
        }
        ${NS}::label $w_l \
                -textvariable @status_bar_text \
                -anchor w \
                -justify left
        pack $w_l -side left
        set c_pack [cb _oneline_pack]

        bind $w <Destroy> [cb _delete %W]
        return $this
}

method _oneline_pack {} {
        $w_c conf -width 100
        pack $w_c -side right
}

constructor two_line {path} {
        global NS
        set w $path
        set w_l $w.l
        set w_c $w.c

        # Two-line status bar: Only one ongoing operation permitted.
        set allow_multiple 0

        set baseline_text ""
        set operations [list]
        set completed_operation_count 0

        ${NS}::frame $w
        ${NS}::label $w_l \
                -textvariable @status_bar_text \
                -anchor w \
                -justify left
        pack $w_l -anchor w -fill x
        set c_pack [list pack $w_c -fill x]

        bind $w <Destroy> [cb _delete %W]
        return $this
}

method ensure_canvas {} {
        if {[winfo exists $w_c]} {
                $w_c coords bar 0 0 0 20
        } else {
                canvas $w_c \
                        -height [expr {int([winfo reqheight $w_l] * 0.6)}] \
                        -borderwidth 1 \
                        -relief groove \
                        -highlightt 0
                $w_c create rectangle 0 0 0 20 -tags bar -fill navy
                eval $c_pack
        }
}

method show {msg} {
        $this ensure_canvas
        set baseline_text $msg
        $this refresh
}

method start {msg {uds {}}} {
        set baseline_text ""

        if {!$allow_multiple && [llength $operations]} {
                return [lindex $operations 0]
        }

        $this ensure_canvas

        set operation [status_bar_operation::new $this $msg $uds]

        lappend operations $operation

        $this refresh

        return $operation
}

method refresh {} {
        set new_text ""

        set total [expr $completed_operation_count * 100]
        set have $total

        foreach operation $operations {
                if {$new_text != ""} {
                        append new_text " / "
                }

                append new_text [$operation get_status]

                set total [expr $total + 100]
                set have [expr $have + [$operation get_progress]]
        }

        if {$new_text == ""} {
                set new_text $baseline_text
        }

        set status_bar_text $new_text

        if {[winfo exists $w_c]} {
                set pixel_width 0
                if {$have > 0} {
                        set pixel_width [expr {[winfo width $w_c] * $have / $total}]
                }

                $w_c coords bar 0 0 $pixel_width 20
        }
}

method stop {operation stop_msg} {
        set idx [lsearch $operations $operation]

        if {$idx >= 0} {
                set operations [lreplace $operations $idx $idx]
                set completed_operation_count [expr \
                        $completed_operation_count + 1]

                if {[llength $operations] == 0} {
                        set completed_operation_count 0

                        destroy $w_c
                        if {$stop_msg ne {}} {
                                set baseline_text $stop_msg
                        }
                }

                $this refresh
        }
}

method stop_all {{stop_msg {}}} {
        # This makes the operation's call to stop a no-op.
        set operations_copy $operations
        set operations [list]

        foreach operation $operations_copy {
                $operation stop
        }

        if {$stop_msg ne {}} {
                set baseline_text $stop_msg
        }

        $this refresh
}

method _delete {current} {
        if {$current eq $w} {
                delete_this
        }
}

}

# The status_bar_operation class tracks a single consumer's ongoing status bar
# activity, with the context that there are a few situations where multiple
# overlapping asynchronous operations might want to display status information
# simultaneously. Instances of status_bar_operation are created by calling
# start on the status_bar, and when the caller is done with its stauts bar
# operation, it calls stop on the operation.

class status_bar_operation {

field status_bar; # reference back to the status_bar that owns this object

field is_active;

field status   {}; # single line of text we show
field progress {}; # current progress (0 to 100)
field prefix   {}; # text we format into status
field units    {}; # unit of progress
field meter    {}; # current core git progress meter (if active)

constructor new {owner msg uds} {
        set status_bar $owner

        set status $msg
        set progress 0
        set prefix $msg
        set units  $uds
        set meter  {}

        set is_active 1

        return $this
}

method get_is_active {} { return $is_active }
method get_status {} { return $status }
method get_progress {} { return $progress }

method update {have total} {
        if {!$is_active} { return }

        set progress 0

        if {$total > 0} {
                set progress [expr {100 * $have / $total}]
        }

        set prec [string length [format %i $total]]

        set status [mc "%s ... %*i of %*i %s (%3i%%)" \
                $prefix \
                $prec $have \
                $prec $total \
                $units $progress]

        $status_bar refresh
}

method update_meter {buf} {
        if {!$is_active} { return }

        append meter $buf
        set r [string last "\r" $meter]
        if {$r == -1} {
                return
        }

        set prior [string range $meter 0 $r]
        set meter [string range $meter [expr {$r + 1}] end]
        set p "\\((\\d+)/(\\d+)\\)"
        if {[regexp ":\\s*\\d+% $p\(?:, done.\\s*\n|\\s*\r)\$" $prior _j a b]} {
                update $this $a $b
        } elseif {[regexp "$p\\s+done\r\$" $prior _j a b]} {
                update $this $a $b
        }
}

method stop {{stop_msg {}}} {
        if {$is_active} {
                set is_active 0
                $status_bar stop $this $stop_msg
        }
}

method restart {msg} {
        if {!$is_active} { return }

        set status $msg
        set prefix $msg
        set meter {}
        $status_bar refresh
}

method _delete {} {
        stop
        delete_this
}

}