]> git.ipfire.org Git - thirdparty/git.git/blob - git-mergetool--lib.sh
tests: use shorter labels in chainlint.sed for AIX sed
[thirdparty/git.git] / git-mergetool--lib.sh
1 # git-mergetool--lib is a shell library for common merge tool functions
2
3 : ${MERGE_TOOLS_DIR=$(git --exec-path)/mergetools}
4
5 IFS='
6 '
7
8 mode_ok () {
9 if diff_mode
10 then
11 can_diff
12 elif merge_mode
13 then
14 can_merge
15 else
16 false
17 fi
18 }
19
20 is_available () {
21 merge_tool_path=$(translate_merge_tool_path "$1") &&
22 type "$merge_tool_path" >/dev/null 2>&1
23 }
24
25 list_config_tools () {
26 section=$1
27 line_prefix=${2:-}
28
29 git config --get-regexp $section'\..*\.cmd' |
30 while read -r key value
31 do
32 toolname=${key#$section.}
33 toolname=${toolname%.cmd}
34
35 printf "%s%s\n" "$line_prefix" "$toolname"
36 done
37 }
38
39 show_tool_names () {
40 condition=${1:-true} per_line_prefix=${2:-} preamble=${3:-}
41 not_found_msg=${4:-}
42 extra_content=${5:-}
43
44 shown_any=
45 ( cd "$MERGE_TOOLS_DIR" && ls ) | {
46 while read toolname
47 do
48 if setup_tool "$toolname" 2>/dev/null &&
49 (eval "$condition" "$toolname")
50 then
51 if test -n "$preamble"
52 then
53 printf "%s\n" "$preamble"
54 preamble=
55 fi
56 shown_any=yes
57 printf "%s%s\n" "$per_line_prefix" "$toolname"
58 fi
59 done
60
61 if test -n "$extra_content"
62 then
63 if test -n "$preamble"
64 then
65 # Note: no '\n' here since we don't want a
66 # blank line if there is no initial content.
67 printf "%s" "$preamble"
68 preamble=
69 fi
70 shown_any=yes
71 printf "\n%s\n" "$extra_content"
72 fi
73
74 if test -n "$preamble" && test -n "$not_found_msg"
75 then
76 printf "%s\n" "$not_found_msg"
77 fi
78
79 test -n "$shown_any"
80 }
81 }
82
83 diff_mode() {
84 test "$TOOL_MODE" = diff
85 }
86
87 merge_mode() {
88 test "$TOOL_MODE" = merge
89 }
90
91 translate_merge_tool_path () {
92 echo "$1"
93 }
94
95 check_unchanged () {
96 if test "$MERGED" -nt "$BACKUP"
97 then
98 return 0
99 else
100 while true
101 do
102 echo "$MERGED seems unchanged."
103 printf "Was the merge successful [y/n]? "
104 read answer || return 1
105 case "$answer" in
106 y*|Y*) return 0 ;;
107 n*|N*) return 1 ;;
108 esac
109 done
110 fi
111 }
112
113 valid_tool () {
114 setup_tool "$1" && return 0
115 cmd=$(get_merge_tool_cmd "$1")
116 test -n "$cmd"
117 }
118
119 setup_user_tool () {
120 merge_tool_cmd=$(get_merge_tool_cmd "$tool")
121 test -n "$merge_tool_cmd" || return 1
122
123 diff_cmd () {
124 ( eval $merge_tool_cmd )
125 }
126
127 merge_cmd () {
128 ( eval $merge_tool_cmd )
129 }
130 }
131
132 setup_tool () {
133 tool="$1"
134
135 # Fallback definitions, to be overridden by tools.
136 can_merge () {
137 return 0
138 }
139
140 can_diff () {
141 return 0
142 }
143
144 diff_cmd () {
145 return 1
146 }
147
148 merge_cmd () {
149 return 1
150 }
151
152 translate_merge_tool_path () {
153 echo "$1"
154 }
155
156 # Most tools' exit codes cannot be trusted, so By default we ignore
157 # their exit code and check the merged file's modification time in
158 # check_unchanged() to determine whether or not the merge was
159 # successful. The return value from run_merge_cmd, by default, is
160 # determined by check_unchanged().
161 #
162 # When a tool's exit code can be trusted then the return value from
163 # run_merge_cmd is simply the tool's exit code, and check_unchanged()
164 # is not called.
165 #
166 # The return value of exit_code_trustable() tells us whether or not we
167 # can trust the tool's exit code.
168 #
169 # User-defined and built-in tools default to false.
170 # Built-in tools advertise that their exit code is trustable by
171 # redefining exit_code_trustable() to true.
172
173 exit_code_trustable () {
174 false
175 }
176
177
178 if ! test -f "$MERGE_TOOLS_DIR/$tool"
179 then
180 setup_user_tool
181 return $?
182 fi
183
184 # Load the redefined functions
185 . "$MERGE_TOOLS_DIR/$tool"
186 # Now let the user override the default command for the tool. If
187 # they have not done so then this will return 1 which we ignore.
188 setup_user_tool
189
190 if merge_mode && ! can_merge
191 then
192 echo "error: '$tool' can not be used to resolve merges" >&2
193 return 1
194 elif diff_mode && ! can_diff
195 then
196 echo "error: '$tool' can only be used to resolve merges" >&2
197 return 1
198 fi
199 return 0
200 }
201
202 get_merge_tool_cmd () {
203 merge_tool="$1"
204 if diff_mode
205 then
206 git config "difftool.$merge_tool.cmd" ||
207 git config "mergetool.$merge_tool.cmd"
208 else
209 git config "mergetool.$merge_tool.cmd"
210 fi
211 }
212
213 trust_exit_code () {
214 if git config --bool "mergetool.$1.trustExitCode"
215 then
216 :; # OK
217 elif exit_code_trustable
218 then
219 echo true
220 else
221 echo false
222 fi
223 }
224
225
226 # Entry point for running tools
227 run_merge_tool () {
228 # If GIT_PREFIX is empty then we cannot use it in tools
229 # that expect to be able to chdir() to its value.
230 GIT_PREFIX=${GIT_PREFIX:-.}
231 export GIT_PREFIX
232
233 merge_tool_path=$(get_merge_tool_path "$1") || exit
234 base_present="$2"
235
236 # Bring tool-specific functions into scope
237 setup_tool "$1" || return 1
238
239 if merge_mode
240 then
241 run_merge_cmd "$1"
242 else
243 run_diff_cmd "$1"
244 fi
245 }
246
247 # Run a either a configured or built-in diff tool
248 run_diff_cmd () {
249 diff_cmd "$1"
250 }
251
252 # Run a either a configured or built-in merge tool
253 run_merge_cmd () {
254 mergetool_trust_exit_code=$(trust_exit_code "$1")
255 if test "$mergetool_trust_exit_code" = "true"
256 then
257 merge_cmd "$1"
258 else
259 touch "$BACKUP"
260 merge_cmd "$1"
261 check_unchanged
262 fi
263 }
264
265 list_merge_tool_candidates () {
266 if merge_mode
267 then
268 tools="tortoisemerge"
269 else
270 tools="kompare"
271 fi
272 if test -n "$DISPLAY"
273 then
274 if test -n "$GNOME_DESKTOP_SESSION_ID"
275 then
276 tools="meld opendiff kdiff3 tkdiff xxdiff $tools"
277 else
278 tools="opendiff kdiff3 tkdiff xxdiff meld $tools"
279 fi
280 tools="$tools gvimdiff diffuse diffmerge ecmerge"
281 tools="$tools p4merge araxis bc codecompare"
282 fi
283 case "${VISUAL:-$EDITOR}" in
284 *vim*)
285 tools="$tools vimdiff emerge"
286 ;;
287 *)
288 tools="$tools emerge vimdiff"
289 ;;
290 esac
291 }
292
293 show_tool_help () {
294 tool_opt="'git ${TOOL_MODE}tool --tool=<tool>'"
295
296 tab=' '
297 LF='
298 '
299 any_shown=no
300
301 cmd_name=${TOOL_MODE}tool
302 config_tools=$({
303 diff_mode && list_config_tools difftool "$tab$tab"
304 list_config_tools mergetool "$tab$tab"
305 } | sort)
306 extra_content=
307 if test -n "$config_tools"
308 then
309 extra_content="${tab}user-defined:${LF}$config_tools"
310 fi
311
312 show_tool_names 'mode_ok && is_available' "$tab$tab" \
313 "$tool_opt may be set to one of the following:" \
314 "No suitable tool for 'git $cmd_name --tool=<tool>' found." \
315 "$extra_content" &&
316 any_shown=yes
317
318 show_tool_names 'mode_ok && ! is_available' "$tab$tab" \
319 "${LF}The following tools are valid, but not currently available:" &&
320 any_shown=yes
321
322 if test "$any_shown" = yes
323 then
324 echo
325 echo "Some of the tools listed above only work in a windowed"
326 echo "environment. If run in a terminal-only session, they will fail."
327 fi
328 exit 0
329 }
330
331 guess_merge_tool () {
332 list_merge_tool_candidates
333 cat >&2 <<-EOF
334
335 This message is displayed because '$TOOL_MODE.tool' is not configured.
336 See 'git ${TOOL_MODE}tool --tool-help' or 'git help config' for more details.
337 'git ${TOOL_MODE}tool' will now attempt to use one of the following tools:
338 $tools
339 EOF
340
341 # Loop over each candidate and stop when a valid merge tool is found.
342 IFS=' '
343 for tool in $tools
344 do
345 is_available "$tool" && echo "$tool" && return 0
346 done
347
348 echo >&2 "No known ${TOOL_MODE} tool is available."
349 return 1
350 }
351
352 get_configured_merge_tool () {
353 # Diff mode first tries diff.tool and falls back to merge.tool.
354 # Merge mode only checks merge.tool
355 if diff_mode
356 then
357 merge_tool=$(git config diff.tool || git config merge.tool)
358 else
359 merge_tool=$(git config merge.tool)
360 fi
361 if test -n "$merge_tool" && ! valid_tool "$merge_tool"
362 then
363 echo >&2 "git config option $TOOL_MODE.tool set to unknown tool: $merge_tool"
364 echo >&2 "Resetting to default..."
365 return 1
366 fi
367 echo "$merge_tool"
368 }
369
370 get_merge_tool_path () {
371 # A merge tool has been set, so verify that it's valid.
372 merge_tool="$1"
373 if ! valid_tool "$merge_tool"
374 then
375 echo >&2 "Unknown merge tool $merge_tool"
376 exit 1
377 fi
378 if diff_mode
379 then
380 merge_tool_path=$(git config difftool."$merge_tool".path ||
381 git config mergetool."$merge_tool".path)
382 else
383 merge_tool_path=$(git config mergetool."$merge_tool".path)
384 fi
385 if test -z "$merge_tool_path"
386 then
387 merge_tool_path=$(translate_merge_tool_path "$merge_tool")
388 fi
389 if test -z "$(get_merge_tool_cmd "$merge_tool")" &&
390 ! type "$merge_tool_path" >/dev/null 2>&1
391 then
392 echo >&2 "The $TOOL_MODE tool $merge_tool is not available as"\
393 "'$merge_tool_path'"
394 exit 1
395 fi
396 echo "$merge_tool_path"
397 }
398
399 get_merge_tool () {
400 # Check if a merge tool has been configured
401 merge_tool=$(get_configured_merge_tool)
402 # Try to guess an appropriate merge tool if no tool has been set.
403 if test -z "$merge_tool"
404 then
405 merge_tool=$(guess_merge_tool) || exit
406 fi
407 echo "$merge_tool"
408 }
409
410 mergetool_find_win32_cmd () {
411 executable=$1
412 sub_directory=$2
413
414 # Use $executable if it exists in $PATH
415 if type -p "$executable" >/dev/null 2>&1
416 then
417 printf '%s' "$executable"
418 return
419 fi
420
421 # Look for executable in the typical locations
422 for directory in $(env | grep -Ei '^PROGRAM(FILES(\(X86\))?|W6432)=' |
423 cut -d '=' -f 2- | sort -u)
424 do
425 if test -n "$directory" && test -x "$directory/$sub_directory/$executable"
426 then
427 printf '%s' "$directory/$sub_directory/$executable"
428 return
429 fi
430 done
431
432 printf '%s' "$executable"
433 }