2 * (C) Copyright 2000-2009
3 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
5 * SPDX-License-Identifier: GPL-2.0+
11 #ifndef __ASSEMBLY__ /* put C only stuff in this section */
13 typedef unsigned char uchar
;
14 typedef volatile unsigned long vu_long
;
15 typedef volatile unsigned short vu_short
;
16 typedef volatile unsigned char vu_char
;
19 #include <asm-offsets.h>
20 #include <linux/bitops.h>
21 #include <linux/types.h>
22 #include <linux/string.h>
23 #include <linux/stringify.h>
24 #include <asm/ptrace.h>
26 #if defined(CONFIG_PCI) && defined(CONFIG_4xx)
29 #if defined(CONFIG_8xx)
30 #include <asm/8xx_immap.h>
31 #if defined(CONFIG_MPC852) || defined(CONFIG_MPC852T) || \
32 defined(CONFIG_MPC859) || defined(CONFIG_MPC859T) || \
33 defined(CONFIG_MPC859DSL) || \
34 defined(CONFIG_MPC866) || defined(CONFIG_MPC866T) || \
35 defined(CONFIG_MPC866P)
36 # define CONFIG_MPC866_FAMILY 1
37 #elif defined(CONFIG_MPC870) \
38 || defined(CONFIG_MPC875) \
39 || defined(CONFIG_MPC880) \
40 || defined(CONFIG_MPC885)
41 # define CONFIG_MPC885_FAMILY 1
43 #if defined(CONFIG_MPC860) \
44 || defined(CONFIG_MPC860T) \
45 || defined(CONFIG_MPC866_FAMILY) \
46 || defined(CONFIG_MPC885_FAMILY)
47 # define CONFIG_MPC86x 1
49 #elif defined(CONFIG_5xx)
50 #include <asm/5xx_immap.h>
51 #elif defined(CONFIG_MPC5xxx)
53 #elif defined(CONFIG_MPC512X)
54 #include <asm/immap_512x.h>
55 #elif defined(CONFIG_8260)
56 #if defined(CONFIG_MPC8247) \
57 || defined(CONFIG_MPC8248) \
58 || defined(CONFIG_MPC8271) \
59 || defined(CONFIG_MPC8272)
60 #define CONFIG_MPC8272_FAMILY 1
62 #if defined(CONFIG_MPC8272_FAMILY)
63 #define CONFIG_MPC8260 1
65 #include <asm/immap_8260.h>
69 #include <asm/immap_86xx.h>
73 #include <asm/immap_85xx.h>
77 #include <asm/immap_83xx.h>
80 #include <asm/ppc4xx.h>
83 #include <board/hymod/hymod.h>
86 #define asmlinkage /* nothing */
88 #ifdef CONFIG_BLACKFIN
89 #include <asm/blackfin.h>
91 #ifdef CONFIG_SOC_DA8XX
92 #include <asm/arch/hardware.h>
106 * Output a debug text when condition "cond" is met. The "cond" should be
107 * computed by a preprocessor in the best case, allowing for the best
110 #define debug_cond(cond, fmt, args...) \
113 printf(fmt, ##args); \
116 #define debug(fmt, args...) \
117 debug_cond(_DEBUG, fmt, ##args)
120 * An assertion is run-time check done in debug mode only. If DEBUG is not
121 * defined then it is skipped. If DEBUG is defined and the assertion fails,
122 * then it calls panic*( which may or may not reset/halt U-Boot (see
123 * CONFIG_PANIC_HANG), It is hoped that all failing assertions are found
124 * before release, and after release it is hoped that they don't matter. But
125 * in any case these failing assertions cannot be fixed with a reset (which
126 * may just do the same assertion again).
128 void __assert_fail(const char *assertion
, const char *file
, unsigned line
,
129 const char *function
);
131 ({ if (!(x) && _DEBUG) \
132 __assert_fail(#x, __FILE__, __LINE__, __func__); })
134 #define error(fmt, args...) do { \
135 printf("ERROR: " fmt "\nat %s:%d/%s()\n", \
136 ##args, __FILE__, __LINE__, __func__); \
141 printf("BUG: failure at %s:%d/%s()!\n", __FILE__, __LINE__, __FUNCTION__); \
144 #define BUG_ON(condition) do { if (unlikely((condition)!=0)) BUG(); } while(0)
147 /* Force a compilation error if condition is true */
148 #define BUILD_BUG_ON(condition) ((void)sizeof(char[1 - 2*!!(condition)]))
150 typedef void (interrupt_handler_t
)(void *);
152 #include <asm/u-boot.h> /* boot information for Linux kernel */
153 #include <asm/global_data.h> /* global data used for startup functions */
156 * enable common handling for all TQM8xxL/M boards:
157 * - CONFIG_TQM8xxM will be defined for all TQM8xxM boards
158 * - CONFIG_TQM8xxL will be defined for all TQM8xxL _and_ TQM8xxM boards
159 * and for the TQM885D board
161 #if defined(CONFIG_TQM823M) || defined(CONFIG_TQM850M) || \
162 defined(CONFIG_TQM855M) || defined(CONFIG_TQM860M) || \
163 defined(CONFIG_TQM862M) || defined(CONFIG_TQM866M)
164 # ifndef CONFIG_TQM8xxM
165 # define CONFIG_TQM8xxM
168 #if defined(CONFIG_TQM823L) || defined(CONFIG_TQM850L) || \
169 defined(CONFIG_TQM855L) || defined(CONFIG_TQM860L) || \
170 defined(CONFIG_TQM862L) || defined(CONFIG_TQM8xxM) || \
171 defined(CONFIG_TQM885D)
172 # ifndef CONFIG_TQM8xxL
173 # define CONFIG_TQM8xxL
178 * General Purpose Utilities
181 ({ typeof(X) __x = (X); \
182 typeof(Y) __y = (Y); \
183 (__x < __y) ? __x : __y; })
186 ({ typeof(X) __x = (X); \
187 typeof(Y) __y = (Y); \
188 (__x > __y) ? __x : __y; })
190 #define MIN(x, y) min(x, y)
191 #define MAX(x, y) max(x, y)
193 #define min3(X, Y, Z) \
194 ({ typeof(X) __x = (X); \
195 typeof(Y) __y = (Y); \
196 typeof(Z) __z = (Z); \
197 __x < __y ? (__x < __z ? __x : __z) : \
198 (__y < __z ? __y : __z); })
200 #define max3(X, Y, Z) \
201 ({ typeof(X) __x = (X); \
202 typeof(Y) __y = (Y); \
203 typeof(Z) __z = (Z); \
204 __x > __y ? (__x > __z ? __x : __z) : \
205 (__y > __z ? __y : __z); })
207 #define MIN3(x, y, z) min3(x, y, z)
208 #define MAX3(x, y, z) max3(x, y, z)
211 * Return the absolute value of a number.
213 * This handles unsigned and signed longs, ints, shorts and chars. For all
214 * input types abs() returns a signed long.
216 * For 64-bit types, use abs64()
220 if (sizeof(x) == sizeof(long)) { \
222 ret = (__x < 0) ? -__x : __x; \
225 ret = (__x < 0) ? -__x : __x; \
230 #define abs64(x) ({ \
232 (__x < 0) ? -__x : __x; \
235 #if defined(CONFIG_ENV_IS_EMBEDDED)
236 #define TOTAL_MALLOC_LEN CONFIG_SYS_MALLOC_LEN
237 #elif ( ((CONFIG_ENV_ADDR+CONFIG_ENV_SIZE) < CONFIG_SYS_MONITOR_BASE) || \
238 (CONFIG_ENV_ADDR >= (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)) ) || \
239 defined(CONFIG_ENV_IS_IN_NVRAM)
240 #define TOTAL_MALLOC_LEN (CONFIG_SYS_MALLOC_LEN + CONFIG_ENV_SIZE)
242 #define TOTAL_MALLOC_LEN CONFIG_SYS_MALLOC_LEN
246 * container_of - cast a member of a structure out to the containing structure
247 * @ptr: the pointer to the member.
248 * @type: the type of the container struct this is embedded in.
249 * @member: the name of the member within the struct.
252 #define container_of(ptr, type, member) ({ \
253 const typeof( ((type *)0)->member ) *__mptr = (ptr); \
254 (type *)( (char *)__mptr - offsetof(type,member) );})
257 * Function Prototypes
260 void hang (void) __attribute__ ((noreturn
));
262 int timer_init(void);
266 phys_size_t
initdram (int);
267 int display_options (void);
268 void print_size(unsigned long long, const char *);
269 int print_buffer(ulong addr
, const void *data
, uint width
, uint count
,
273 void main_loop (void);
274 int run_command(const char *cmd
, int flag
);
277 * Run a list of commands separated by ; or even \0
279 * Note that if 'len' is not -1, then the command does not need to be nul
280 * terminated, Memory will be allocated for the command in that case.
282 * @param cmd List of commands to run, each separated bu semicolon
283 * @param len Length of commands excluding terminator if known (-1 if not)
284 * @param flag Execution flags (CMD_FLAG_...)
285 * @return 0 on success, or != 0 on error.
287 int run_command_list(const char *cmd
, int len
, int flag
);
288 int readline (const char *const prompt
);
289 int readline_into_buffer(const char *const prompt
, char *buffer
,
291 int parse_line (char *, char *[]);
292 void init_cmd_timeout(void);
293 void reset_cmd_timeout(void);
294 extern char console_buffer
[];
296 /* arch/$(ARCH)/lib/board.c */
297 void board_init_f(ulong
);
298 void board_init_r (gd_t
*, ulong
) __attribute__ ((noreturn
));
299 int checkboard (void);
300 int checkflash (void);
301 int checkdram (void);
302 int last_stage_init(void);
303 extern ulong monitor_flash_len
;
304 int mac_read_from_eeprom(void);
305 extern u8 __dtb_dt_begin
[]; /* embedded device tree blob */
306 int set_cpu_clk_info(void);
307 #if defined(CONFIG_DISPLAY_CPUINFO)
308 int print_cpuinfo(void);
310 static inline int print_cpuinfo(void)
315 int update_flash_size(int flash_size
);
318 * Show the DRAM size in a board-specific way
320 * This is used by boards to display DRAM information in their own way.
322 * @param size Size of DRAM (which should be displayed along with other info)
324 void board_show_dram(ulong size
);
327 * arch_fixup_memory_node() - Write arch-specific memory information to fdt
329 * Defined in arch/$(ARCH)/lib/bootm.c
331 * @blob: FDT blob to write to
332 * @return 0 if ok, or -ve FDT_ERR_... on failure
334 int arch_fixup_memory_node(void *blob
);
337 void flash_perror (int);
339 /* common/cmd_source.c */
340 int source (ulong addr
, const char *fit_uname
);
342 extern ulong load_addr
; /* Default Load Address */
343 extern ulong save_addr
; /* Default Save Address */
344 extern ulong save_size
; /* Default Save Size */
346 /* common/cmd_doc.c */
347 void doc_probe(unsigned long physadr
);
349 /* common/cmd_net.c */
350 int do_tftpb(cmd_tbl_t
*cmdtp
, int flag
, int argc
, char * const argv
[]);
352 /* common/cmd_fat.c */
353 int do_fat_fsload(cmd_tbl_t
*, int, int, char * const []);
355 /* common/cmd_ext2.c */
356 int do_ext2load(cmd_tbl_t
*, int, int, char * const []);
358 /* common/cmd_nvedit.c */
360 void env_relocate (void);
361 int envmatch (uchar
*, int);
362 char *getenv (const char *);
363 int getenv_f (const char *name
, char *buf
, unsigned len
);
364 ulong
getenv_ulong(const char *name
, int base
, ulong default_val
);
367 * getenv_hex() - Return an environment variable as a hex value
369 * Decode an environment as a hex number (it may or may not have a 0x
370 * prefix). If the environment variable cannot be found, or does not start
371 * with hex digits, the default value is returned.
373 * @varname: Variable to decode
374 * @default_val: Value to return on error
376 ulong
getenv_hex(const char *varname
, ulong default_val
);
379 * Read an environment variable as a boolean
380 * Return -1 if variable does not exist (default to true)
382 int getenv_yesno(const char *var
);
384 int setenv (const char *, const char *);
385 int setenv_ulong(const char *varname
, ulong value
);
386 int setenv_hex(const char *varname
, ulong value
);
388 * setenv_addr - Set an environment variable to an address in hex
390 * @varname: Environment variable to set
391 * @addr: Value to set it to
392 * @return 0 if ok, 1 on error
394 static inline int setenv_addr(const char *varname
, const void *addr
)
396 return setenv_hex(varname
, (ulong
)addr
);
400 # include <asm/mach-types.h>
401 # include <asm/setup.h>
402 # include <asm/u-boot-arm.h> /* ARM version to be fixed! */
403 #endif /* CONFIG_ARM */
404 #ifdef CONFIG_X86 /* x86 version to be fixed! */
405 # include <asm/u-boot-x86.h>
406 #endif /* CONFIG_X86 */
407 #ifdef CONFIG_SANDBOX
408 # include <asm/u-boot-sandbox.h> /* TODO(sjg) what needs to be fixed? */
411 # include <asm/mach-types.h>
412 # include <asm/setup.h>
413 # include <asm/u-boot-nds32.h>
414 #endif /* CONFIG_NDS32 */
416 # include <asm/u-boot-mips.h>
417 #endif /* CONFIG_MIPS */
419 # include <asm/u-boot-arc.h>
420 #endif /* CONFIG_ARC */
422 #ifdef CONFIG_AUTO_COMPLETE
423 int env_complete(char *var
, int maxv
, char *cmdv
[], int maxsz
, char *buf
);
425 int get_env_id (void);
427 void pci_init (void);
428 void pci_init_board(void);
429 void pciinfo (int, int);
431 #if defined(CONFIG_PCI) && defined(CONFIG_4xx)
432 int pci_pre_init (struct pci_controller
*);
433 int is_pci_host (struct pci_controller
*);
436 #if defined(CONFIG_PCI) && (defined(CONFIG_440) || defined(CONFIG_405EX))
437 # if defined(CONFIG_SYS_PCI_TARGET_INIT)
438 void pci_target_init (struct pci_controller
*);
440 # if defined(CONFIG_SYS_PCI_MASTER_INIT)
441 void pci_master_init (struct pci_controller
*);
443 #if defined(CONFIG_440SPE) || \
444 defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
445 defined(CONFIG_405EX)
446 void pcie_setup_hoses(int busno
);
450 int misc_init_f (void);
451 int misc_init_r (void);
453 /* common/exports.c */
454 void jumptable_init(void);
456 /* common/kallsysm.c */
457 const char *symbol_lookup(unsigned long addr
, unsigned long *caddr
);
460 void api_init (void);
462 /* common/memsize.c */
463 long get_ram_size (long *, long);
464 phys_size_t
get_effective_memsize(void);
466 /* $(BOARD)/$(BOARD).c */
467 void reset_phy (void);
468 void fdc_hw_init (void);
470 /* $(BOARD)/eeprom.c */
471 void eeprom_init (void);
473 int eeprom_probe (unsigned dev_addr
, unsigned offset
);
475 int eeprom_read (unsigned dev_addr
, unsigned offset
, uchar
*buffer
, unsigned cnt
);
476 int eeprom_write (unsigned dev_addr
, unsigned offset
, uchar
*buffer
, unsigned cnt
);
478 extern uchar
pic_read (uchar reg
);
479 extern void pic_write (uchar reg
, uchar val
);
483 * Set this up regardless of board
484 * type, to prevent errors.
486 #if defined(CONFIG_SPI) || !defined(CONFIG_SYS_I2C_EEPROM_ADDR)
487 # define CONFIG_SYS_DEF_EEPROM_ADDR 0
489 #if !defined(CONFIG_ENV_EEPROM_IS_ON_I2C)
490 # define CONFIG_SYS_DEF_EEPROM_ADDR CONFIG_SYS_I2C_EEPROM_ADDR
492 #endif /* CONFIG_SPI || !defined(CONFIG_SYS_I2C_EEPROM_ADDR) */
494 #if defined(CONFIG_SPI)
495 extern void spi_init_f (void);
496 extern void spi_init_r (void);
497 extern ssize_t
spi_read (uchar
*, int, uchar
*, int);
498 extern ssize_t
spi_write (uchar
*, int, uchar
*, int);
501 #ifdef CONFIG_RPXCLASSIC
502 void rpxclassic_init (void);
505 void rpxlite_init (void);
508 /* $(BOARD)/mbx8xx.c */
509 void mbx_init (void);
510 void board_serial_init (void);
511 void board_ether_init (void);
515 /* $(BOARD)/hermes.c */
516 void hermes_start_lxt980 (int speed
);
519 #ifdef CONFIG_EVB64260
520 void evb64260_init(void);
521 void debug_led(int, int);
522 void display_mem_map(void);
523 void perform_soft_reset(void);
526 /* $(BOARD)/$(BOARD).c */
527 int board_early_init_f (void);
528 int board_late_init (void);
529 int board_postclk_init (void); /* after clocks/timebase, before env/serial */
530 int board_early_init_r (void);
531 void board_poweroff (void);
533 #if defined(CONFIG_SYS_DRAM_TEST)
535 #endif /* CONFIG_SYS_DRAM_TEST */
538 #if defined(CONFIG_5xx) || \
540 uint
get_immr (uint
);
543 #if defined(CONFIG_MPC5xxx)
548 uint
rd_ic_cst (void);
549 void wr_ic_cst (uint
);
550 void wr_ic_adr (uint
);
551 uint
rd_dc_cst (void);
552 void wr_dc_cst (uint
);
553 void wr_dc_adr (uint
);
554 int icache_status (void);
555 void icache_enable (void);
556 void icache_disable(void);
557 int dcache_status (void);
558 void dcache_enable (void);
559 void dcache_disable(void);
560 void mmu_disable(void);
561 #if defined(CONFIG_ARM)
562 void relocate_code(ulong
);
564 void relocate_code(ulong
, gd_t
*, ulong
) __attribute__ ((noreturn
));
566 ulong
get_endaddr (void);
567 void trap_init (ulong
);
568 #if defined (CONFIG_4xx) || \
569 defined (CONFIG_MPC5xxx) || \
570 defined (CONFIG_74xx_7xx) || \
571 defined (CONFIG_74x) || \
572 defined (CONFIG_75x) || \
573 defined (CONFIG_74xx) || \
574 defined (CONFIG_MPC85xx) || \
575 defined (CONFIG_MPC86xx) || \
576 defined (CONFIG_MPC83xx)
577 unsigned char in8(unsigned int);
578 void out8(unsigned int, unsigned char);
579 unsigned short in16(unsigned int);
580 unsigned short in16r(unsigned int);
581 void out16(unsigned int, unsigned short value
);
582 void out16r(unsigned int, unsigned short value
);
583 unsigned long in32(unsigned int);
584 unsigned long in32r(unsigned int);
585 void out32(unsigned int, unsigned long value
);
586 void out32r(unsigned int, unsigned long value
);
587 void ppcDcbf(unsigned long value
);
588 void ppcDcbi(unsigned long value
);
590 void ppcDcbz(unsigned long value
);
592 #if defined (CONFIG_MICROBLAZE)
593 unsigned short in16(unsigned int);
594 void out16(unsigned int, unsigned short value
);
597 #if defined (CONFIG_MPC83xx)
598 void ppcDWload(unsigned int *addr
, unsigned int *ret
);
599 void ppcDWstore(unsigned int *addr
, unsigned int *value
);
600 void disable_addr_trans(void);
601 void enable_addr_trans(void);
602 #if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
603 void ddr_enable_ecc(unsigned int dram_size
);
608 * Return the current value of a monotonically increasing microsecond timer.
609 * Granularity may be larger than 1us if hardware does not support this.
611 ulong
timer_get_us(void);
614 static inline int cpumask_next(int cpu
, unsigned int mask
)
616 for (cpu
++; !((1 << cpu
) & mask
); cpu
++)
622 #define for_each_cpu(iter, cpu, num_cpus, mask) \
623 for (iter = 0, cpu = cpumask_next(-1, mask); \
625 iter++, cpu = cpumask_next(cpu, mask)) \
627 int cpu_numcores (void);
629 int is_core_valid (unsigned int);
632 int checkicache (void);
633 int checkdcache (void);
634 void upmconfig (unsigned int, unsigned int *, unsigned int);
635 ulong
get_tbclk (void);
636 void reset_cpu (ulong addr
);
637 #if defined (CONFIG_OF_LIBFDT) && defined (CONFIG_OF_BOARD_SETUP)
638 void ft_cpu_setup(void *blob
, bd_t
*bd
);
640 void ft_pci_setup(void *blob
, bd_t
*bd
);
644 void smp_set_core_boot_addr(unsigned long addr
, int corenr
);
645 void smp_kick_all_cpus(void);
647 /* $(CPU)/serial.c */
648 int serial_init (void);
649 void serial_setbrg (void);
650 void serial_putc (const char);
651 void serial_putc_raw(const char);
652 void serial_puts (const char *);
653 int serial_getc (void);
654 int serial_tstc (void);
656 void _serial_setbrg (const int);
657 void _serial_putc (const char, const int);
658 void _serial_putc_raw(const char, const int);
659 void _serial_puts (const char *, const int);
660 int _serial_getc (const int);
661 int _serial_tstc (const int);
664 int get_clocks (void);
665 int get_clocks_866 (void);
666 int sdram_adjust_866 (void);
667 int adjust_sdram_tbs_8xx (void);
668 #if defined(CONFIG_8260)
669 int prt_8260_clks (void);
670 #elif defined(CONFIG_MPC5xxx)
671 int prt_mpc5xxx_clks (void);
674 ulong
get_OPB_freq (void);
675 ulong
get_PCI_freq (void);
677 #if defined(CONFIG_S3C24X0) || \
678 defined(CONFIG_LH7A40X) || \
679 defined(CONFIG_EP93XX)
680 ulong
get_FCLK (void);
681 ulong
get_HCLK (void);
682 ulong
get_PCLK (void);
683 ulong
get_UCLK (void);
685 #if defined(CONFIG_LH7A40X)
686 ulong
get_PLLCLK (void);
688 #if defined CONFIG_INCA_IP
689 uint
incaip_get_cpuclk (void);
691 #if defined(CONFIG_IMX)
692 ulong
get_systemPLLCLK(void);
693 ulong
get_FCLK(void);
694 ulong
get_HCLK(void);
695 ulong
get_BCLK(void);
696 ulong
get_PERCLK1(void);
697 ulong
get_PERCLK2(void);
698 ulong
get_PERCLK3(void);
700 ulong
get_bus_freq (ulong
);
701 int get_serial_clock(void);
703 #if defined(CONFIG_MPC83xx) || defined(CONFIG_MPC85xx)
704 ulong
get_ddr_freq(ulong
);
706 #if defined(CONFIG_MPC85xx)
707 typedef MPC85xx_SYS_INFO sys_info_t
;
708 void get_sys_info ( sys_info_t
* );
709 # if defined(CONFIG_OF_LIBFDT)
710 void ft_fixup_cpu(void *, u64
);
711 void ft_fixup_num_cores(void *);
714 #if defined(CONFIG_MPC86xx)
715 typedef MPC86xx_SYS_INFO sys_info_t
;
716 void get_sys_info ( sys_info_t
* );
717 static inline ulong
get_ddr_freq(ulong dummy
)
719 return get_bus_freq(dummy
);
723 #if defined(CONFIG_4xx)
724 # if defined(CONFIG_440)
725 # if defined(CONFIG_440SPE)
726 unsigned long determine_sysper(void);
727 unsigned long determine_pci_clock_per(void);
730 typedef PPC4xx_SYS_INFO sys_info_t
;
731 int ppc440spe_revB(void);
732 void get_sys_info ( sys_info_t
* );
735 /* $(CPU)/cpu_init.c */
736 #if defined(CONFIG_8xx) || defined(CONFIG_8260)
737 void cpu_init_f (volatile immap_t
*immr
);
739 #if defined(CONFIG_4xx) || defined(CONFIG_MPC85xx) || defined(CONFIG_MCF52x2) ||defined(CONFIG_MPC86xx)
740 void cpu_init_f (void);
743 int cpu_init_r (void);
744 #if defined(CONFIG_8260)
745 int prt_8260_rsr (void);
746 #elif defined(CONFIG_MPC83xx)
747 int prt_83xx_rsr (void);
750 /* $(CPU)/interrupts.c */
751 int interrupt_init (void);
752 void timer_interrupt (struct pt_regs
*);
753 void external_interrupt (struct pt_regs
*);
754 void irq_install_handler(int, interrupt_handler_t
*, void *);
755 void irq_free_handler (int);
756 void reset_timer (void);
757 ulong
get_timer (ulong base
);
759 /* Return value of monotonic microsecond timer */
760 unsigned long timer_get_us(void);
762 void enable_interrupts (void);
763 int disable_interrupts (void);
765 /* $(CPU)/.../commproc.c */
766 int dpram_init (void);
767 uint
dpram_base(void);
768 uint
dpram_base_align(uint align
);
769 uint
dpram_alloc(uint size
);
770 uint
dpram_alloc_align(uint size
,uint align
);
771 void bootcount_store (ulong
);
772 ulong
bootcount_load (void);
773 #define BOOTCOUNT_MAGIC 0xB001C041
775 /* $(CPU)/.../<eth> */
776 void mii_init (void);
778 /* $(CPU)/.../lcd.c */
779 ulong
lcd_setmem (ulong
);
781 /* $(CPU)/.../video.c */
782 ulong
video_setmem (ulong
);
784 /* arch/$(ARCH)/lib/cache.c */
785 void enable_caches(void);
786 void flush_cache (unsigned long, unsigned long);
787 void flush_dcache_all(void);
788 void flush_dcache_range(unsigned long start
, unsigned long stop
);
789 void invalidate_dcache_range(unsigned long start
, unsigned long stop
);
790 void invalidate_dcache_all(void);
791 void invalidate_icache_all(void);
793 /* arch/$(ARCH)/lib/ticks.S */
794 unsigned long long get_ticks(void);
795 void wait_ticks (unsigned long);
797 /* arch/$(ARCH)/lib/time.c */
798 void __udelay (unsigned long);
799 ulong
usec2ticks (unsigned long usec
);
800 ulong
ticks2usec (unsigned long ticks
);
801 int init_timebase (void);
804 int gunzip(void *, int, unsigned char *, unsigned long *);
805 int zunzip(void *dst
, int dstlen
, unsigned char *src
, unsigned long *lenp
,
806 int stoponerr
, int offset
);
809 void qsort(void *base
, size_t nmemb
, size_t size
,
810 int(*compar
)(const void *, const void *));
811 int strcmp_compar(const void *, const void *);
814 void udelay (unsigned long);
815 void mdelay(unsigned long);
818 void uuid_str_to_bin(const char *uuid
, unsigned char *out
);
819 int uuid_str_valid(const char *uuid
);
822 #include <vsprintf.h>
825 char * strmhz(char *buf
, unsigned long hz
);
828 #include <u-boot/crc.h>
831 #if defined(CONFIG_RANDOM_MACADDR) || \
832 defined(CONFIG_BOOTP_RANDOM_DELAY) || \
833 defined(CONFIG_CMD_LINK_LOCAL)
835 void srand(unsigned int seed
);
836 unsigned int rand(void);
837 unsigned int rand_r(unsigned int *seedp
);
840 /* common/console.c */
841 int console_init_f(void); /* Before relocation; uses the serial stuff */
842 int console_init_r(void); /* After relocation; uses the console stuff */
843 int console_assign(int file
, const char *devname
); /* Assign the console */
845 int had_ctrlc (void); /* have we had a Control-C since last clear? */
846 void clear_ctrlc (void); /* clear the Control-C condition */
847 int disable_ctrlc (int); /* 1 to disable, 0 to enable Control-C detect */
850 * STDIO based functions (can always be used)
853 int serial_printf (const char *fmt
, ...)
854 __attribute__ ((format (__printf__
, 1, 2)));
860 void putc(const char c
);
861 void puts(const char *s
);
862 int printf(const char *fmt
, ...)
863 __attribute__ ((format (__printf__
, 1, 2)));
864 int vprintf(const char *fmt
, va_list args
);
867 #define eputc(c) fputc(stderr, c)
868 #define eputs(s) fputs(stderr, s)
869 #define eprintf(fmt,args...) fprintf(stderr,fmt ,##args)
872 * FILE based functions (can only be used AFTER relocation!)
879 int fprintf(int file
, const char *fmt
, ...)
880 __attribute__ ((format (__printf__
, 2, 3)));
881 void fputs(int file
, const char *s
);
882 void fputc(int file
, const char c
);
887 int gzip(void *dst
, unsigned long *lenp
,
888 unsigned char *src
, unsigned long srclen
);
889 int zzip(void *dst
, unsigned long *lenp
, unsigned char *src
,
890 unsigned long srclen
, int stoponerr
,
891 int (*func
)(unsigned long, unsigned long));
893 /* lib/net_utils.c */
895 static inline IPaddr_t
getenv_IPaddr(char *var
)
897 return string_to_ip(getenv(var
));
901 * CONSOLE multiplexing.
903 #ifdef CONFIG_CONSOLE_MUX
907 int pcmcia_init (void);
909 #ifdef CONFIG_STATUS_LED
910 # include <status_led.h>
913 #include <bootstage.h>
915 #ifdef CONFIG_SHOW_ACTIVITY
916 void show_activity(int arg
);
919 /* Multicore arch functions */
921 int cpu_status(int nr
);
922 int cpu_reset(int nr
);
923 int cpu_disable(int nr
);
924 int cpu_release(int nr
, int argc
, char * const argv
[]);
927 /* Define a null map_sysmem() if the architecture doesn't use it */
928 # ifndef CONFIG_ARCH_MAP_SYSMEM
929 static inline void *map_sysmem(phys_addr_t paddr
, unsigned long len
)
931 return (void *)(uintptr_t)paddr
;
934 static inline void unmap_sysmem(const void *vaddr
)
938 static inline phys_addr_t
map_to_sysmem(const void *ptr
)
940 return (phys_addr_t
)(uintptr_t)ptr
;
944 #endif /* __ASSEMBLY__ */
948 * Has to be included outside of the #ifndef __ASSEMBLY__ section.
949 * Otherwise might lead to compilation errors in assembler files.
951 #include <asm/cache.h>
954 /* Put only stuff here that the assembler can digest */
957 #define CONFIG_HAS_POST
958 #ifndef CONFIG_POST_ALT_LIST
959 #define CONFIG_POST_STD_LIST
963 #ifdef CONFIG_INIT_CRITICAL
964 #error CONFIG_INIT_CRITICAL is deprecated!
965 #error Read section CONFIG_SKIP_LOWLEVEL_INIT in README.
968 #define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
970 #define ROUND(a,b) (((a) + (b) - 1) & ~((b) - 1))
971 #define DIV_ROUND(n,d) (((n) + ((d)/2)) / (d))
972 #define DIV_ROUND_UP(n,d) (((n) + (d) - 1) / (d))
973 #define roundup(x, y) ((((x) + ((y) - 1)) / (y)) * (y))
976 * Divide positive or negative dividend by positive divisor and round
977 * to closest integer. Result is undefined for negative divisors and
978 * for negative dividends if the divisor variable type is unsigned.
980 #define DIV_ROUND_CLOSEST(x, divisor)( \
983 typeof(divisor) __d = divisor; \
984 (((typeof(x))-1) > 0 || \
985 ((typeof(divisor))-1) > 0 || (__x) > 0) ? \
986 (((__x) + ((__d) / 2)) / (__d)) : \
987 (((__x) - ((__d) / 2)) / (__d)); \
991 #define ALIGN(x,a) __ALIGN_MASK((x),(typeof(x))(a)-1)
992 #define __ALIGN_MASK(x,mask) (((x)+(mask))&~(mask))
995 * ARCH_DMA_MINALIGN is defined in asm/cache.h for each architecture. It
996 * is used to align DMA buffers.
999 #include <asm/cache.h>
1003 * The ALLOC_CACHE_ALIGN_BUFFER macro is used to allocate a buffer on the
1004 * stack that meets the minimum architecture alignment requirements for DMA.
1005 * Such a buffer is useful for DMA operations where flushing and invalidating
1006 * the cache before and after a read and/or write operation is required for
1007 * correct operations.
1009 * When called the macro creates an array on the stack that is sized such
1012 * 1) The beginning of the array can be advanced enough to be aligned.
1014 * 2) The size of the aligned portion of the array is a multiple of the minimum
1015 * architecture alignment required for DMA.
1017 * 3) The aligned portion contains enough space for the original number of
1018 * elements requested.
1020 * The macro then creates a pointer to the aligned portion of this array and
1021 * assigns to the pointer the address of the first element in the aligned
1022 * portion of the array.
1024 * Calling the macro as:
1026 * ALLOC_CACHE_ALIGN_BUFFER(uint32_t, buffer, 1024);
1028 * Will result in something similar to saying:
1030 * uint32_t buffer[1024];
1032 * The following differences exist:
1034 * 1) The resulting buffer is guaranteed to be aligned to the value of
1035 * ARCH_DMA_MINALIGN.
1037 * 2) The buffer variable created by the macro is a pointer to the specified
1038 * type, and NOT an array of the specified type. This can be very important
1039 * if you want the address of the buffer, which you probably do, to pass it
1040 * to the DMA hardware. The value of &buffer is different in the two cases.
1041 * In the macro case it will be the address of the pointer, not the address
1042 * of the space reserved for the buffer. However, in the second case it
1043 * would be the address of the buffer. So if you are replacing hard coded
1044 * stack buffers with this macro you need to make sure you remove the & from
1045 * the locations where you are taking the address of the buffer.
1047 * Note that the size parameter is the number of array elements to allocate,
1048 * not the number of bytes.
1050 * This macro can not be used outside of function scope, or for the creation
1051 * of a function scoped static buffer. It can not be used to create a cache
1052 * line aligned global buffer.
1054 #define PAD_COUNT(s, pad) (((s) - 1) / (pad) + 1)
1055 #define PAD_SIZE(s, pad) (PAD_COUNT(s, pad) * pad)
1056 #define ALLOC_ALIGN_BUFFER_PAD(type, name, size, align, pad) \
1057 char __##name[ROUND(PAD_SIZE((size) * sizeof(type), pad), align) \
1060 type *name = (type *) ALIGN((uintptr_t)__##name, align)
1061 #define ALLOC_ALIGN_BUFFER(type, name, size, align) \
1062 ALLOC_ALIGN_BUFFER_PAD(type, name, size, align, 1)
1063 #define ALLOC_CACHE_ALIGN_BUFFER_PAD(type, name, size, pad) \
1064 ALLOC_ALIGN_BUFFER_PAD(type, name, size, ARCH_DMA_MINALIGN, pad)
1065 #define ALLOC_CACHE_ALIGN_BUFFER(type, name, size) \
1066 ALLOC_ALIGN_BUFFER(type, name, size, ARCH_DMA_MINALIGN)
1069 * DEFINE_CACHE_ALIGN_BUFFER() is similar to ALLOC_CACHE_ALIGN_BUFFER, but it's
1070 * purpose is to allow allocating aligned buffers outside of function scope.
1071 * Usage of this macro shall be avoided or used with extreme care!
1073 #define DEFINE_ALIGN_BUFFER(type, name, size, align) \
1074 static char __##name[roundup(size * sizeof(type), align)] \
1077 static type *name = (type *)__##name
1078 #define DEFINE_CACHE_ALIGN_BUFFER(type, name, size) \
1079 DEFINE_ALIGN_BUFFER(type, name, size, ARCH_DMA_MINALIGN)
1081 /* Pull in stuff for the build system */
1083 # include <environment.h>
1086 #endif /* __COMMON_H_ */