include/common.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * (C) Copyright 2000-2009
   4  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
   5  */
   6
   7 #ifndef __COMMON_H_
   8 #define __COMMON_H_     1
   9
  10 #ifndef __ASSEMBLY__            /* put C only stuff in this section */
  11
  12 typedef unsigned char           uchar;
  13 typedef volatile unsigned long  vu_long;
  14 typedef volatile unsigned short vu_short;
  15 typedef volatile unsigned char  vu_char;
  16
  17 #include <config.h>
  18 #include <errno.h>
  19 #include <time.h>
  20 #include <asm-offsets.h>
  21 #include <linux/bitops.h>
  22 #include <linux/bug.h>
  23 #include <linux/delay.h>
  24 #include <linux/types.h>
  25 #include <linux/printk.h>
  26 #include <linux/string.h>
  27 #include <linux/stringify.h>
  28 #include <asm/ptrace.h>
  29 #include <stdarg.h>
  30 #include <stdio.h>
  31 #include <linux/kernel.h>
  32
  33 #include <part.h>
  34 #include <flash.h>
  35 #include <image.h>
  36
  37 #ifdef __LP64__
  38 #define CONFIG_SYS_SUPPORT_64BIT_DATA
  39 #endif
  40
  41 #include <log.h>
  42
  43 typedef void (interrupt_handler_t)(void *);
  44
  45 #include <asm/u-boot.h> /* boot information for Linux kernel */
  46 #include <asm/global_data.h>    /* global data used for startup functions */
  47
  48 #if defined(CONFIG_ENV_IS_EMBEDDED)
  49 #define TOTAL_MALLOC_LEN        CONFIG_SYS_MALLOC_LEN
  50 #elif ( ((CONFIG_ENV_ADDR+CONFIG_ENV_SIZE) < CONFIG_SYS_MONITOR_BASE) || \
  51         (CONFIG_ENV_ADDR >= (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)) ) || \
  52       defined(CONFIG_ENV_IS_IN_NVRAM)
  53 #define TOTAL_MALLOC_LEN        (CONFIG_SYS_MALLOC_LEN + CONFIG_ENV_SIZE)
  54 #else
  55 #define TOTAL_MALLOC_LEN        CONFIG_SYS_MALLOC_LEN
  56 #endif
  57
  58 /* startup functions, used in:
  59  * common/board_f.c
  60  * common/init/board_init.c
  61  * common/board_r.c
  62  * common/board_info.c
  63  */
  64 #include <init.h>
  65
  66 /*
  67  * Function Prototypes
  68  */
  69 void    hang            (void) __attribute__ ((noreturn));
  70
  71 int     cpu_init(void);
  72
  73 #include <display_options.h>
  74
  75 /* common/main.c */
  76 void    main_loop       (void);
  77 int run_command(const char *cmd, int flag);
  78 int run_command_repeatable(const char *cmd, int flag);
  79
  80 /**
  81  * Run a list of commands separated by ; or even \0
  82  *
  83  * Note that if 'len' is not -1, then the command does not need to be nul
  84  * terminated, Memory will be allocated for the command in that case.
  85  *
  86  * @param cmd   List of commands to run, each separated bu semicolon
  87  * @param len   Length of commands excluding terminator if known (-1 if not)
  88  * @param flag  Execution flags (CMD_FLAG_...)
  89  * @return 0 on success, or != 0 on error.
  90  */
  91 int run_command_list(const char *cmd, int len, int flag);
  92
  93 int checkflash(void);
  94 int checkdram(void);
  95 extern u8 __dtb_dt_begin[];     /* embedded device tree blob */
  96 extern u8 __dtb_dt_spl_begin[]; /* embedded device tree blob for SPL/TPL */
  97 int mdm_init(void);
  98
  99 /**
 100  * Show the DRAM size in a board-specific way
 101  *
 102  * This is used by boards to display DRAM information in their own way.
 103  *
 104  * @param size  Size of DRAM (which should be displayed along with other info)
 105  */
 106 void board_show_dram(phys_size_t size);
 107
 108 /**
 109  * Get the uppermost pointer that is valid to access
 110  *
 111  * Some systems may not map all of their address space. This function allows
 112  * boards to indicate what their highest support pointer value is for DRAM
 113  * access.
 114  *
 115  * @param total_size    Size of U-Boot (unused?)
 116  */
 117 ulong board_get_usable_ram_top(ulong total_size);
 118
 119 /**
 120  * arch_fixup_fdt() - Write arch-specific information to fdt
 121  *
 122  * Defined in arch/$(ARCH)/lib/bootm-fdt.c
 123  *
 124  * @blob:       FDT blob to write to
 125  * @return 0 if ok, or -ve FDT_ERR_... on failure
 126  */
 127 int arch_fixup_fdt(void *blob);
 128
 129 /* common/flash.c */
 130 void flash_perror (int);
 131
 132 /* common/cmd_source.c */
 133 int     source (ulong addr, const char *fit_uname);
 134
 135 extern ulong load_addr;         /* Default Load Address */
 136 extern ulong save_addr;         /* Default Save Address */
 137 extern ulong save_size;         /* Default Save Size */
 138
 139 /* common/cmd_net.c */
 140 int do_tftpb(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]);
 141
 142 /* common/cmd_fat.c */
 143 int do_fat_fsload(cmd_tbl_t *, int, int, char * const []);
 144
 145 /* common/cmd_ext2.c */
 146 int do_ext2load(cmd_tbl_t *, int, int, char * const []);
 147
 148 /* common/cmd_nvedit.c */
 149 int     env_init     (void);
 150 void    env_relocate (void);
 151 int     envmatch     (uchar *, int);
 152
 153 /**
 154  * env_get() - Look up the value of an environment variable
 155  *
 156  * In U-Boot proper this can be called before relocation (which is when the
 157  * environment is loaded from storage, i.e. GD_FLG_ENV_READY is 0). In that
 158  * case this function calls env_get_f().
 159  *
 160  * @varname:    Variable to look up
 161  * @return value of variable, or NULL if not found
 162  */
 163 char *env_get(const char *varname);
 164
 165 /**
 166  * env_get_f() - Look up the value of an environment variable (early)
 167  *
 168  * This function is called from env_get() if the environment has not been
 169  * loaded yet (GD_FLG_ENV_READY flag is 0). Some environment locations will
 170  * support reading the value (slowly) and some will not.
 171  *
 172  * @varname:    Variable to look up
 173  * @return value of variable, or NULL if not found
 174  */
 175 int env_get_f(const char *name, char *buf, unsigned len);
 176
 177 /**
 178  * env_get_ulong() - Return an environment variable as an integer value
 179  *
 180  * Most U-Boot environment variables store hex values. For those which store
 181  * (e.g.) base-10 integers, this function can be used to read the value.
 182  *
 183  * @name:       Variable to look up
 184  * @base:       Base to use (e.g. 10 for base 10, 2 for binary)
 185  * @default_val: Default value to return if no value is found
 186  * @return the value found, or @default_val if none
 187  */
 188 ulong env_get_ulong(const char *name, int base, ulong default_val);
 189
 190 /**
 191  * env_get_hex() - Return an environment variable as a hex value
 192  *
 193  * Decode an environment as a hex number (it may or may not have a 0x
 194  * prefix). If the environment variable cannot be found, or does not start
 195  * with hex digits, the default value is returned.
 196  *
 197  * @varname:            Variable to decode
 198  * @default_val:        Value to return on error
 199  */
 200 ulong env_get_hex(const char *varname, ulong default_val);
 201
 202 /*
 203  * Read an environment variable as a boolean
 204  * Return -1 if variable does not exist (default to true)
 205  */
 206 int env_get_yesno(const char *var);
 207
 208 /**
 209  * env_set() - set an environment variable
 210  *
 211  * This sets or deletes the value of an environment variable. For setting the
 212  * value the variable is created if it does not already exist.
 213  *
 214  * @varname: Variable to adjust
 215  * @value: Value to set for the variable, or NULL or "" to delete the variable
 216  * @return 0 if OK, 1 on error
 217  */
 218 int env_set(const char *varname, const char *value);
 219
 220 /**
 221  * env_set_ulong() - set an environment variable to an integer
 222  *
 223  * @varname: Variable to adjust
 224  * @value: Value to set for the variable (will be converted to a string)
 225  * @return 0 if OK, 1 on error
 226  */
 227 int env_set_ulong(const char *varname, ulong value);
 228
 229 /**
 230  * env_set_hex() - set an environment variable to a hex value
 231  *
 232  * @varname: Variable to adjust
 233  * @value: Value to set for the variable (will be converted to a hex string)
 234  * @return 0 if OK, 1 on error
 235  */
 236 int env_set_hex(const char *varname, ulong value);
 237
 238 /**
 239  * env_set_addr - Set an environment variable to an address in hex
 240  *
 241  * @varname:    Environment variable to set
 242  * @addr:       Value to set it to
 243  * @return 0 if ok, 1 on error
 244  */
 245 static inline int env_set_addr(const char *varname, const void *addr)
 246 {
 247         return env_set_hex(varname, (ulong)addr);
 248 }
 249
 250 #ifdef CONFIG_AUTO_COMPLETE
 251 int env_complete(char *var, int maxv, char *cmdv[], int maxsz, char *buf);
 252 #endif
 253 int get_env_id (void);
 254
 255 void    pci_init_board(void);
 256
 257 /* common/exports.c */
 258 void    jumptable_init(void);
 259
 260 /* common/kallsysm.c */
 261 const char *symbol_lookup(unsigned long addr, unsigned long *caddr);
 262
 263 /* common/memsize.c */
 264 long    get_ram_size  (long *, long);
 265 phys_size_t get_effective_memsize(void);
 266
 267 /* $(BOARD)/$(BOARD).c */
 268 void    reset_phy     (void);
 269 void    fdc_hw_init   (void);
 270
 271 /* $(BOARD)/eeprom.c */
 272 #ifdef CONFIG_CMD_EEPROM
 273 void eeprom_init  (int bus);
 274 int  eeprom_read  (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt);
 275 int  eeprom_write (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt);
 276 #else
 277 /*
 278  * Some EEPROM code is depecated because it used the legacy I2C interface. Add
 279  * some macros here so we don't have to touch every one of those uses
 280  */
 281 #define eeprom_init(bus)
 282 #define eeprom_read(dev_addr, offset, buffer, cnt) ((void)-ENOSYS)
 283 #define eeprom_write(dev_addr, offset, buffer, cnt) ((void)-ENOSYS)
 284 #endif
 285
 286 #if !defined(CONFIG_ENV_EEPROM_IS_ON_I2C) && defined(CONFIG_SYS_I2C_EEPROM_ADDR)
 287 # define CONFIG_SYS_DEF_EEPROM_ADDR CONFIG_SYS_I2C_EEPROM_ADDR
 288 #endif
 289
 290 #if defined(CONFIG_MPC8XX_SPI)
 291 extern void spi_init_f (void);
 292 extern void spi_init_r (void);
 293 extern ssize_t spi_read  (uchar *, int, uchar *, int);
 294 extern ssize_t spi_write (uchar *, int, uchar *, int);
 295 #endif
 296
 297 /* $(BOARD)/$(BOARD).c */
 298 int board_early_init_f (void);
 299 int board_fix_fdt (void *rw_fdt_blob); /* manipulate the U-Boot fdt before its relocation */
 300 int board_late_init (void);
 301 int board_postclk_init (void); /* after clocks/timebase, before env/serial */
 302 int board_early_init_r (void);
 303
 304 #if defined(CONFIG_SYS_DRAM_TEST)
 305 int testdram(void);
 306 #endif /* CONFIG_SYS_DRAM_TEST */
 307
 308 /* $(CPU)/start.S */
 309 int     icache_status (void);
 310 void    icache_enable (void);
 311 void    icache_disable(void);
 312 int     dcache_status (void);
 313 void    dcache_enable (void);
 314 void    dcache_disable(void);
 315 void    mmu_disable(void);
 316 #if defined(CONFIG_ARM)
 317 void    relocate_code(ulong);
 318 #else
 319 void    relocate_code(ulong, gd_t *, ulong) __attribute__ ((noreturn));
 320 #endif
 321 ulong   get_endaddr   (void);
 322 void    trap_init     (ulong);
 323
 324 /* $(CPU)/cpu.c */
 325 static inline int cpumask_next(int cpu, unsigned int mask)
 326 {
 327         for (cpu++; !((1 << cpu) & mask); cpu++)
 328                 ;
 329
 330         return cpu;
 331 }
 332
 333 #define for_each_cpu(iter, cpu, num_cpus, mask) \
 334         for (iter = 0, cpu = cpumask_next(-1, mask); \
 335                 iter < num_cpus; \
 336                 iter++, cpu = cpumask_next(cpu, mask)) \
 337
 338 int     cpu_numcores  (void);
 339 int     cpu_num_dspcores(void);
 340 u32     cpu_mask      (void);
 341 u32     cpu_dsp_mask(void);
 342 int     is_core_valid (unsigned int);
 343
 344 void s_init(void);
 345
 346 int     checkcpu      (void);
 347 int     checkicache   (void);
 348 int     checkdcache   (void);
 349 void    upmconfig     (unsigned int, unsigned int *, unsigned int);
 350 ulong   get_tbclk     (void);
 351 void    reset_misc    (void);
 352 void    reset_cpu     (ulong addr);
 353 void ft_cpu_setup(void *blob, bd_t *bd);
 354 void ft_pci_setup(void *blob, bd_t *bd);
 355
 356 void smp_set_core_boot_addr(unsigned long addr, int corenr);
 357 void smp_kick_all_cpus(void);
 358
 359 /* $(CPU)/serial.c */
 360 int     serial_init   (void);
 361 void    serial_setbrg (void);
 362 void    serial_putc   (const char);
 363 void    serial_putc_raw(const char);
 364 void    serial_puts   (const char *);
 365 int     serial_getc   (void);
 366 int     serial_tstc   (void);
 367 int     serial_setconfig(uint config);
 368
 369 /* $(CPU)/speed.c */
 370 int     get_clocks (void);
 371 ulong   get_bus_freq  (ulong);
 372 int get_serial_clock(void);
 373
 374 /* $(CPU)/interrupts.c */
 375 int     interrupt_init     (void);
 376 void    timer_interrupt    (struct pt_regs *);
 377 void    external_interrupt (struct pt_regs *);
 378 void    irq_install_handler(int, interrupt_handler_t *, void *);
 379 void    irq_free_handler   (int);
 380 void    reset_timer        (void);
 381
 382 /* Return value of monotonic microsecond timer */
 383 unsigned long timer_get_us(void);
 384
 385 void    enable_interrupts  (void);
 386 int     disable_interrupts (void);
 387
 388 /* $(CPU)/.../commproc.c */
 389 int     dpram_init (void);
 390 uint    dpram_base(void);
 391 uint    dpram_base_align(uint align);
 392 uint    dpram_alloc(uint size);
 393 uint    dpram_alloc_align(uint size,uint align);
 394 void    bootcount_store (ulong);
 395 ulong   bootcount_load (void);
 396
 397 /* $(CPU)/.../<eth> */
 398 void mii_init (void);
 399
 400 /* $(CPU)/.../lcd.c */
 401 ulong   lcd_setmem (ulong);
 402
 403 /* $(CPU)/.../video.c */
 404 ulong   video_setmem (ulong);
 405
 406 /* arch/$(ARCH)/lib/cache.c */
 407 void    enable_caches(void);
 408 void    flush_cache   (unsigned long, unsigned long);
 409 void    flush_dcache_all(void);
 410 void    flush_dcache_range(unsigned long start, unsigned long stop);
 411 void    invalidate_dcache_range(unsigned long start, unsigned long stop);
 412 void    invalidate_dcache_all(void);
 413 void    invalidate_icache_all(void);
 414
 415 enum {
 416         /* Disable caches (else flush caches but leave them active) */
 417         CBL_DISABLE_CACHES              = 1 << 0,
 418         CBL_SHOW_BOOTSTAGE_REPORT       = 1 << 1,
 419
 420         CBL_ALL                         = 3,
 421 };
 422
 423 /**
 424  * Clean up ready for linux
 425  *
 426  * @param flags         Flags to control what is done
 427  */
 428 int cleanup_before_linux_select(int flags);
 429
 430 /* arch/$(ARCH)/lib/ticks.S */
 431 uint64_t get_ticks(void);
 432 void    wait_ticks    (unsigned long);
 433
 434 /* arch/$(ARCH)/lib/time.c */
 435 ulong   usec2ticks    (unsigned long usec);
 436 ulong   ticks2usec    (unsigned long ticks);
 437
 438 /* lib/gunzip.c */
 439 int gzip_parse_header(const unsigned char *src, unsigned long len);
 440 int gunzip(void *, int, unsigned char *, unsigned long *);
 441 int zunzip(void *dst, int dstlen, unsigned char *src, unsigned long *lenp,
 442                                                 int stoponerr, int offset);
 443
 444 /**
 445  * gzwrite progress indicators: defined weak to allow board-specific
 446  * overrides:
 447  *
 448  *      gzwrite_progress_init called on startup
 449  *      gzwrite_progress called during decompress/write loop
 450  *      gzwrite_progress_finish called at end of loop to
 451  *              indicate success (retcode=0) or failure
 452  */
 453 void gzwrite_progress_init(u64 expected_size);
 454
 455 void gzwrite_progress(int iteration,
 456                      u64 bytes_written,
 457                      u64 total_bytes);
 458
 459 void gzwrite_progress_finish(int retcode,
 460                              u64 totalwritten,
 461                              u64 totalsize,
 462                              u32 expected_crc,
 463                              u32 calculated_crc);
 464
 465 /**
 466  * decompress and write gzipped image from memory to block device
 467  *
 468  * @param       src             compressed image address
 469  * @param       len             compressed image length in bytes
 470  * @param       dev             block device descriptor
 471  * @param       szwritebuf      bytes per write (pad to erase size)
 472  * @param       startoffs       offset in bytes of first write
 473  * @param       szexpected      expected uncompressed length
 474  *                              may be zero to use gzip trailer
 475  *                              for files under 4GiB
 476  */
 477 int gzwrite(unsigned char *src, int len,
 478             struct blk_desc *dev,
 479             unsigned long szwritebuf,
 480             u64 startoffs,
 481             u64 szexpected);
 482
 483 /* lib/lz4_wrapper.c */
 484 int ulz4fn(const void *src, size_t srcn, void *dst, size_t *dstn);
 485
 486 /* lib/qsort.c */
 487 void qsort(void *base, size_t nmemb, size_t size,
 488            int(*compar)(const void *, const void *));
 489 int strcmp_compar(const void *, const void *);
 490
 491 /* lib/uuid.c */
 492 #include <uuid.h>
 493
 494 /* lib/vsprintf.c */
 495 #include <vsprintf.h>
 496
 497 /* lib/strmhz.c */
 498 char *  strmhz(char *buf, unsigned long hz);
 499
 500 /* lib/crc32.c */
 501 #include <u-boot/crc.h>
 502
 503 /* lib/rand.c */
 504 #define RAND_MAX -1U
 505 void srand(unsigned int seed);
 506 unsigned int rand(void);
 507 unsigned int rand_r(unsigned int *seedp);
 508
 509 /*
 510  * STDIO based functions (can always be used)
 511  */
 512 /* serial stuff */
 513 int     serial_printf (const char *fmt, ...)
 514                 __attribute__ ((format (__printf__, 1, 2)));
 515
 516 /* lib/gzip.c */
 517 int gzip(void *dst, unsigned long *lenp,
 518                 unsigned char *src, unsigned long srclen);
 519 int zzip(void *dst, unsigned long *lenp, unsigned char *src,
 520                 unsigned long srclen, int stoponerr,
 521                 int (*func)(unsigned long, unsigned long));
 522
 523 /* lib/net_utils.c */
 524 #include <net.h>
 525 static inline struct in_addr env_get_ip(char *var)
 526 {
 527         return string_to_ip(env_get(var));
 528 }
 529
 530 int     pcmcia_init (void);
 531
 532 #ifdef CONFIG_LED_STATUS
 533 # include <status_led.h>
 534 #endif
 535
 536 #include <bootstage.h>
 537
 538 #ifdef CONFIG_SHOW_ACTIVITY
 539 void show_activity(int arg);
 540 #endif
 541
 542 /* Multicore arch functions */
 543 #ifdef CONFIG_MP
 544 int cpu_status(u32 nr);
 545 int cpu_reset(u32 nr);
 546 int cpu_disable(u32 nr);
 547 int cpu_release(u32 nr, int argc, char * const argv[]);
 548 #endif
 549
 550 #else   /* __ASSEMBLY__ */
 551
 552 #endif  /* __ASSEMBLY__ */
 553
 554 /* Put only stuff here that the assembler can digest */
 555
 556 #ifdef CONFIG_POST
 557 #define CONFIG_HAS_POST
 558 #ifndef CONFIG_POST_ALT_LIST
 559 #define CONFIG_POST_STD_LIST
 560 #endif
 561 #endif
 562
 563 #define ROUND(a,b)              (((a) + (b) - 1) & ~((b) - 1))
 564
 565 /*
 566  * check_member() - Check the offset of a structure member
 567  *
 568  * @structure:  Name of structure (e.g. global_data)
 569  * @member:     Name of member (e.g. baudrate)
 570  * @offset:     Expected offset in bytes
 571  */
 572 #define check_member(structure, member, offset) _Static_assert( \
 573         offsetof(struct structure, member) == offset, \
 574         "`struct " #structure "` offset for `" #member "` is not " #offset)
 575
 576 /* Avoid using CONFIG_EFI_STUB directly as we may boot from other loaders */
 577 #ifdef CONFIG_EFI_STUB
 578 #define ll_boot_init()  false
 579 #else
 580 #define ll_boot_init()  true
 581 #endif
 582
 583 /* Pull in stuff for the build system */
 584 #ifdef DO_DEPS_ONLY
 585 # include <environment.h>
 586 #endif
 587
 588 #endif  /* __COMMON_H_ */