2 * (C) Copyright 2000-2009
3 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
5 * SPDX-License-Identifier: GPL-2.0+
11 #ifndef __ASSEMBLY__ /* put C only stuff in this section */
13 typedef unsigned char uchar
;
14 typedef volatile unsigned long vu_long
;
15 typedef volatile unsigned short vu_short
;
16 typedef volatile unsigned char vu_char
;
19 #include <asm-offsets.h>
20 #include <linux/bitops.h>
21 #include <linux/types.h>
22 #include <linux/string.h>
23 #include <linux/stringify.h>
24 #include <asm/ptrace.h>
26 #include <linux/kernel.h>
27 #if defined(CONFIG_PCI) && defined(CONFIG_4xx)
30 #if defined(CONFIG_8xx)
31 #include <asm/8xx_immap.h>
32 #if defined(CONFIG_MPC859) || defined(CONFIG_MPC859T) || \
33 defined(CONFIG_MPC866) || \
34 defined(CONFIG_MPC866P)
35 # define CONFIG_MPC866_FAMILY 1
36 #elif defined(CONFIG_MPC885)
37 # define CONFIG_MPC885_FAMILY 1
39 #if defined(CONFIG_MPC860) \
40 || defined(CONFIG_MPC860T) \
41 || defined(CONFIG_MPC866_FAMILY) \
42 || defined(CONFIG_MPC885_FAMILY)
43 # define CONFIG_MPC86x 1
45 #elif defined(CONFIG_5xx)
46 #include <asm/5xx_immap.h>
47 #elif defined(CONFIG_MPC5xxx)
49 #elif defined(CONFIG_MPC512X)
50 #include <asm/immap_512x.h>
51 #elif defined(CONFIG_MPC8260)
52 #if defined(CONFIG_MPC8247) \
53 || defined(CONFIG_MPC8272)
54 #define CONFIG_MPC8272_FAMILY 1
56 #include <asm/immap_8260.h>
60 #include <asm/immap_86xx.h>
64 #include <asm/immap_85xx.h>
68 #include <asm/immap_83xx.h>
71 #include <asm/ppc4xx.h>
74 #define asmlinkage /* nothing */
76 #ifdef CONFIG_BLACKFIN
77 #include <asm/blackfin.h>
79 #ifdef CONFIG_SOC_DA8XX
80 #include <asm/arch/hardware.h>
87 /* Bring in printf format macros if inttypes.h is included */
88 #define __STDC_FORMAT_MACROS
91 #define CONFIG_SYS_SUPPORT_64BIT_DATA
101 #define pr_fmt(fmt) fmt
105 * Output a debug text when condition "cond" is met. The "cond" should be
106 * computed by a preprocessor in the best case, allowing for the best
109 #define debug_cond(cond, fmt, args...) \
112 printf(pr_fmt(fmt), ##args); \
115 #define debug(fmt, args...) \
116 debug_cond(_DEBUG, fmt, ##args)
119 * An assertion is run-time check done in debug mode only. If DEBUG is not
120 * defined then it is skipped. If DEBUG is defined and the assertion fails,
121 * then it calls panic*( which may or may not reset/halt U-Boot (see
122 * CONFIG_PANIC_HANG), It is hoped that all failing assertions are found
123 * before release, and after release it is hoped that they don't matter. But
124 * in any case these failing assertions cannot be fixed with a reset (which
125 * may just do the same assertion again).
127 void __assert_fail(const char *assertion
, const char *file
, unsigned line
,
128 const char *function
);
130 ({ if (!(x) && _DEBUG) \
131 __assert_fail(#x, __FILE__, __LINE__, __func__); })
133 #define error(fmt, args...) do { \
134 printf("ERROR: " pr_fmt(fmt) "\nat %s:%d/%s()\n", \
135 ##args, __FILE__, __LINE__, __func__); \
140 printf("BUG: failure at %s:%d/%s()!\n", __FILE__, __LINE__, __FUNCTION__); \
143 #define BUG_ON(condition) do { if (unlikely((condition)!=0)) BUG(); } while(0)
146 /* Force a compilation error if condition is true */
147 #define BUILD_BUG_ON(condition) ((void)sizeof(char[1 - 2*!!(condition)]))
149 typedef void (interrupt_handler_t
)(void *);
151 #include <asm/u-boot.h> /* boot information for Linux kernel */
152 #include <asm/global_data.h> /* global data used for startup functions */
155 * enable common handling for all TQM8xxL/M boards:
156 * - CONFIG_TQM8xxM will be defined for all TQM8xxM boards
157 * - CONFIG_TQM8xxL will be defined for all TQM8xxL _and_ TQM8xxM boards
158 * and for the TQM885D board
160 #if defined(CONFIG_TQM823M) || defined(CONFIG_TQM850M) || \
161 defined(CONFIG_TQM855M) || defined(CONFIG_TQM860M) || \
162 defined(CONFIG_TQM862M) || defined(CONFIG_TQM866M)
163 # ifndef CONFIG_TQM8xxM
164 # define CONFIG_TQM8xxM
167 #if defined(CONFIG_TQM823L) || defined(CONFIG_TQM850L) || \
168 defined(CONFIG_TQM855L) || defined(CONFIG_TQM860L) || \
169 defined(CONFIG_TQM862L) || defined(CONFIG_TQM8xxM) || \
170 defined(CONFIG_TQM885D)
171 # ifndef CONFIG_TQM8xxL
172 # define CONFIG_TQM8xxL
176 #if defined(CONFIG_ENV_IS_EMBEDDED)
177 #define TOTAL_MALLOC_LEN CONFIG_SYS_MALLOC_LEN
178 #elif ( ((CONFIG_ENV_ADDR+CONFIG_ENV_SIZE) < CONFIG_SYS_MONITOR_BASE) || \
179 (CONFIG_ENV_ADDR >= (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)) ) || \
180 defined(CONFIG_ENV_IS_IN_NVRAM)
181 #define TOTAL_MALLOC_LEN (CONFIG_SYS_MALLOC_LEN + CONFIG_ENV_SIZE)
183 #define TOTAL_MALLOC_LEN CONFIG_SYS_MALLOC_LEN
187 * Function Prototypes
190 void hang (void) __attribute__ ((noreturn
));
192 int timer_init(void);
196 phys_size_t
initdram (int);
197 int display_options (void);
200 * print_size() - Print a size with a suffic
202 * print sizes as "xxx KiB", "xxx.y KiB", "xxx MiB", "xxx.y MiB",
203 * xxx GiB, xxx.y GiB, etc as needed; allow for optional trailing string
206 * @size: Size to print
207 * @suffix String to print after the size
209 void print_size(uint64_t size
, const char *suffix
);
211 int print_buffer(ulong addr
, const void *data
, uint width
, uint count
,
215 void main_loop (void);
216 int run_command(const char *cmd
, int flag
);
217 int run_command_repeatable(const char *cmd
, int flag
);
220 * Run a list of commands separated by ; or even \0
222 * Note that if 'len' is not -1, then the command does not need to be nul
223 * terminated, Memory will be allocated for the command in that case.
225 * @param cmd List of commands to run, each separated bu semicolon
226 * @param len Length of commands excluding terminator if known (-1 if not)
227 * @param flag Execution flags (CMD_FLAG_...)
228 * @return 0 on success, or != 0 on error.
230 int run_command_list(const char *cmd
, int len
, int flag
);
231 extern char console_buffer
[];
233 /* arch/$(ARCH)/lib/board.c */
234 void board_init_f(ulong
);
235 void board_init_r (gd_t
*, ulong
) __attribute__ ((noreturn
));
236 int checkboard (void);
237 int checkflash (void);
238 int checkdram (void);
239 int last_stage_init(void);
240 extern ulong monitor_flash_len
;
241 int mac_read_from_eeprom(void);
242 extern u8 __dtb_dt_begin
[]; /* embedded device tree blob */
243 int set_cpu_clk_info(void);
245 #if defined(CONFIG_DISPLAY_CPUINFO)
246 int print_cpuinfo(void);
248 static inline int print_cpuinfo(void)
253 int update_flash_size(int flash_size
);
254 int arch_early_init_r(void);
257 * Show the DRAM size in a board-specific way
259 * This is used by boards to display DRAM information in their own way.
261 * @param size Size of DRAM (which should be displayed along with other info)
263 void board_show_dram(ulong size
);
266 * arch_fixup_fdt() - Write arch-specific information to fdt
268 * Defined in arch/$(ARCH)/lib/bootm-fdt.c
270 * @blob: FDT blob to write to
271 * @return 0 if ok, or -ve FDT_ERR_... on failure
273 int arch_fixup_fdt(void *blob
);
276 void flash_perror (int);
278 /* common/cmd_source.c */
279 int source (ulong addr
, const char *fit_uname
);
281 extern ulong load_addr
; /* Default Load Address */
282 extern ulong save_addr
; /* Default Save Address */
283 extern ulong save_size
; /* Default Save Size */
285 /* common/cmd_doc.c */
286 void doc_probe(unsigned long physadr
);
288 /* common/cmd_net.c */
289 int do_tftpb(cmd_tbl_t
*cmdtp
, int flag
, int argc
, char * const argv
[]);
291 /* common/cmd_fat.c */
292 int do_fat_fsload(cmd_tbl_t
*, int, int, char * const []);
294 /* common/cmd_ext2.c */
295 int do_ext2load(cmd_tbl_t
*, int, int, char * const []);
297 /* common/cmd_nvedit.c */
299 void env_relocate (void);
300 int envmatch (uchar
*, int);
302 /* Avoid unfortunate conflict with libc's getenv() */
303 #ifdef CONFIG_SANDBOX
304 #define getenv uboot_getenv
306 char *getenv (const char *);
307 int getenv_f (const char *name
, char *buf
, unsigned len
);
308 ulong
getenv_ulong(const char *name
, int base
, ulong default_val
);
311 * getenv_hex() - Return an environment variable as a hex value
313 * Decode an environment as a hex number (it may or may not have a 0x
314 * prefix). If the environment variable cannot be found, or does not start
315 * with hex digits, the default value is returned.
317 * @varname: Variable to decode
318 * @default_val: Value to return on error
320 ulong
getenv_hex(const char *varname
, ulong default_val
);
323 * Read an environment variable as a boolean
324 * Return -1 if variable does not exist (default to true)
326 int getenv_yesno(const char *var
);
328 int setenv (const char *, const char *);
329 int setenv_ulong(const char *varname
, ulong value
);
330 int setenv_hex(const char *varname
, ulong value
);
332 * setenv_addr - Set an environment variable to an address in hex
334 * @varname: Environment variable to set
335 * @addr: Value to set it to
336 * @return 0 if ok, 1 on error
338 static inline int setenv_addr(const char *varname
, const void *addr
)
340 return setenv_hex(varname
, (ulong
)addr
);
344 # include <asm/mach-types.h>
345 # include <asm/setup.h>
346 # include <asm/u-boot-arm.h> /* ARM version to be fixed! */
347 #endif /* CONFIG_ARM */
348 #ifdef CONFIG_X86 /* x86 version to be fixed! */
349 # include <asm/u-boot-x86.h>
350 #endif /* CONFIG_X86 */
351 #ifdef CONFIG_SANDBOX
352 # include <asm/u-boot-sandbox.h> /* TODO(sjg) what needs to be fixed? */
355 # include <asm/mach-types.h>
356 # include <asm/setup.h>
357 # include <asm/u-boot-nds32.h>
358 #endif /* CONFIG_NDS32 */
360 # include <asm/u-boot-mips.h>
361 #endif /* CONFIG_MIPS */
363 # include <asm/u-boot-arc.h>
364 #endif /* CONFIG_ARC */
366 #ifdef CONFIG_AUTO_COMPLETE
367 int env_complete(char *var
, int maxv
, char *cmdv
[], int maxsz
, char *buf
);
369 int get_env_id (void);
371 void pci_init (void);
372 void pci_init_board(void);
373 void pciinfo (int, int);
375 #if defined(CONFIG_PCI) && defined(CONFIG_4xx)
376 int pci_pre_init (struct pci_controller
*);
377 int is_pci_host (struct pci_controller
*);
380 #if defined(CONFIG_PCI) && (defined(CONFIG_440) || defined(CONFIG_405EX))
381 # if defined(CONFIG_SYS_PCI_TARGET_INIT)
382 void pci_target_init (struct pci_controller
*);
384 # if defined(CONFIG_SYS_PCI_MASTER_INIT)
385 void pci_master_init (struct pci_controller
*);
387 #if defined(CONFIG_440SPE) || \
388 defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
389 defined(CONFIG_405EX)
390 void pcie_setup_hoses(int busno
);
394 int misc_init_f (void);
395 int misc_init_r (void);
397 /* common/exports.c */
398 void jumptable_init(void);
400 /* common/kallsysm.c */
401 const char *symbol_lookup(unsigned long addr
, unsigned long *caddr
);
404 void api_init (void);
406 /* common/memsize.c */
407 long get_ram_size (long *, long);
408 phys_size_t
get_effective_memsize(void);
410 /* $(BOARD)/$(BOARD).c */
411 void reset_phy (void);
412 void fdc_hw_init (void);
414 /* $(BOARD)/eeprom.c */
415 void eeprom_init (void);
417 int eeprom_probe (unsigned dev_addr
, unsigned offset
);
419 int eeprom_read (unsigned dev_addr
, unsigned offset
, uchar
*buffer
, unsigned cnt
);
420 int eeprom_write (unsigned dev_addr
, unsigned offset
, uchar
*buffer
, unsigned cnt
);
422 extern uchar
pic_read (uchar reg
);
423 extern void pic_write (uchar reg
, uchar val
);
427 * Set this up regardless of board
428 * type, to prevent errors.
430 #if defined(CONFIG_SPI) || !defined(CONFIG_SYS_I2C_EEPROM_ADDR)
431 # define CONFIG_SYS_DEF_EEPROM_ADDR 0
433 #if !defined(CONFIG_ENV_EEPROM_IS_ON_I2C)
434 # define CONFIG_SYS_DEF_EEPROM_ADDR CONFIG_SYS_I2C_EEPROM_ADDR
436 #endif /* CONFIG_SPI || !defined(CONFIG_SYS_I2C_EEPROM_ADDR) */
438 #if defined(CONFIG_SPI)
439 extern void spi_init_f (void);
440 extern void spi_init_r (void);
441 extern ssize_t
spi_read (uchar
*, int, uchar
*, int);
442 extern ssize_t
spi_write (uchar
*, int, uchar
*, int);
446 /* $(BOARD)/hermes.c */
447 void hermes_start_lxt980 (int speed
);
450 #ifdef CONFIG_EVB64260
451 void evb64260_init(void);
452 void debug_led(int, int);
453 void display_mem_map(void);
454 void perform_soft_reset(void);
457 /* $(BOARD)/$(BOARD).c */
458 int board_early_init_f (void);
459 int board_late_init (void);
460 int board_postclk_init (void); /* after clocks/timebase, before env/serial */
461 int board_early_init_r (void);
462 void board_poweroff (void);
464 #if defined(CONFIG_SYS_DRAM_TEST)
466 #endif /* CONFIG_SYS_DRAM_TEST */
469 #if defined(CONFIG_5xx) || \
471 uint
get_immr (uint
);
474 #if defined(CONFIG_MPC5xxx)
479 uint
rd_ic_cst (void);
480 void wr_ic_cst (uint
);
481 void wr_ic_adr (uint
);
482 uint
rd_dc_cst (void);
483 void wr_dc_cst (uint
);
484 void wr_dc_adr (uint
);
485 int icache_status (void);
486 void icache_enable (void);
487 void icache_disable(void);
488 int dcache_status (void);
489 void dcache_enable (void);
490 void dcache_disable(void);
491 void mmu_disable(void);
492 #if defined(CONFIG_ARM)
493 void relocate_code(ulong
);
495 void relocate_code(ulong
, gd_t
*, ulong
) __attribute__ ((noreturn
));
497 ulong
get_endaddr (void);
498 void trap_init (ulong
);
499 #if defined (CONFIG_4xx) || \
500 defined (CONFIG_MPC5xxx) || \
501 defined (CONFIG_74xx_7xx) || \
502 defined (CONFIG_74x) || \
503 defined (CONFIG_75x) || \
504 defined (CONFIG_74xx) || \
505 defined (CONFIG_MPC85xx) || \
506 defined (CONFIG_MPC86xx) || \
507 defined (CONFIG_MPC83xx)
508 unsigned char in8(unsigned int);
509 void out8(unsigned int, unsigned char);
510 unsigned short in16(unsigned int);
511 unsigned short in16r(unsigned int);
512 void out16(unsigned int, unsigned short value
);
513 void out16r(unsigned int, unsigned short value
);
514 unsigned long in32(unsigned int);
515 unsigned long in32r(unsigned int);
516 void out32(unsigned int, unsigned long value
);
517 void out32r(unsigned int, unsigned long value
);
518 void ppcDcbf(unsigned long value
);
519 void ppcDcbi(unsigned long value
);
521 void ppcDcbz(unsigned long value
);
523 #if defined (CONFIG_MICROBLAZE)
524 unsigned short in16(unsigned int);
525 void out16(unsigned int, unsigned short value
);
528 #if defined (CONFIG_MPC83xx)
529 void ppcDWload(unsigned int *addr
, unsigned int *ret
);
530 void ppcDWstore(unsigned int *addr
, unsigned int *value
);
531 void disable_addr_trans(void);
532 void enable_addr_trans(void);
533 #if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
534 void ddr_enable_ecc(unsigned int dram_size
);
539 * Return the current value of a monotonically increasing microsecond timer.
540 * Granularity may be larger than 1us if hardware does not support this.
542 ulong
timer_get_us(void);
545 static inline int cpumask_next(int cpu
, unsigned int mask
)
547 for (cpu
++; !((1 << cpu
) & mask
); cpu
++)
553 #define for_each_cpu(iter, cpu, num_cpus, mask) \
554 for (iter = 0, cpu = cpumask_next(-1, mask); \
556 iter++, cpu = cpumask_next(cpu, mask)) \
558 int cpu_numcores (void);
560 int is_core_valid (unsigned int);
563 int checkicache (void);
564 int checkdcache (void);
565 void upmconfig (unsigned int, unsigned int *, unsigned int);
566 ulong
get_tbclk (void);
567 void reset_misc (void);
568 void reset_cpu (ulong addr
);
569 #if defined (CONFIG_OF_LIBFDT) && defined (CONFIG_OF_BOARD_SETUP)
570 void ft_cpu_setup(void *blob
, bd_t
*bd
);
572 void ft_pci_setup(void *blob
, bd_t
*bd
);
576 void smp_set_core_boot_addr(unsigned long addr
, int corenr
);
577 void smp_kick_all_cpus(void);
579 /* $(CPU)/serial.c */
580 int serial_init (void);
581 void serial_setbrg (void);
582 void serial_putc (const char);
583 void serial_putc_raw(const char);
584 void serial_puts (const char *);
585 int serial_getc (void);
586 int serial_tstc (void);
588 /* These versions take a stdio_dev pointer */
590 int serial_stub_getc(struct stdio_dev
*sdev
);
591 int serial_stub_tstc(struct stdio_dev
*sdev
);
594 int get_clocks (void);
595 int get_clocks_866 (void);
596 int sdram_adjust_866 (void);
597 int adjust_sdram_tbs_8xx (void);
598 #if defined(CONFIG_MPC8260)
599 int prt_8260_clks (void);
600 #elif defined(CONFIG_MPC5xxx)
601 int prt_mpc5xxx_clks (void);
604 ulong
get_OPB_freq (void);
605 ulong
get_PCI_freq (void);
607 #if defined(CONFIG_S3C24X0) || \
608 defined(CONFIG_LH7A40X) || \
609 defined(CONFIG_EP93XX)
610 ulong
get_FCLK (void);
611 ulong
get_HCLK (void);
612 ulong
get_PCLK (void);
613 ulong
get_UCLK (void);
615 #if defined(CONFIG_LH7A40X)
616 ulong
get_PLLCLK (void);
618 #if defined(CONFIG_IMX)
619 ulong
get_systemPLLCLK(void);
620 ulong
get_FCLK(void);
621 ulong
get_HCLK(void);
622 ulong
get_BCLK(void);
623 ulong
get_PERCLK1(void);
624 ulong
get_PERCLK2(void);
625 ulong
get_PERCLK3(void);
627 ulong
get_bus_freq (ulong
);
628 int get_serial_clock(void);
630 #if defined(CONFIG_MPC85xx)
631 typedef MPC85xx_SYS_INFO sys_info_t
;
632 void get_sys_info ( sys_info_t
* );
633 # if defined(CONFIG_OF_LIBFDT)
634 void ft_fixup_cpu(void *, u64
);
635 void ft_fixup_num_cores(void *);
638 #if defined(CONFIG_MPC86xx)
639 typedef MPC86xx_SYS_INFO sys_info_t
;
640 void get_sys_info ( sys_info_t
* );
641 static inline ulong
get_ddr_freq(ulong dummy
)
643 return get_bus_freq(dummy
);
646 ulong
get_ddr_freq(ulong
);
649 #if defined(CONFIG_4xx)
650 # if defined(CONFIG_440)
651 # if defined(CONFIG_440SPE)
652 unsigned long determine_sysper(void);
653 unsigned long determine_pci_clock_per(void);
656 typedef PPC4xx_SYS_INFO sys_info_t
;
657 int ppc440spe_revB(void);
658 void get_sys_info ( sys_info_t
* );
661 /* $(CPU)/cpu_init.c */
662 #if defined(CONFIG_8xx) || defined(CONFIG_MPC8260)
663 void cpu_init_f (volatile immap_t
*immr
);
665 #if defined(CONFIG_4xx) || defined(CONFIG_MCF52x2) || defined(CONFIG_MPC86xx)
666 void cpu_init_f (void);
668 #ifdef CONFIG_MPC85xx
669 ulong
cpu_init_f(void);
672 int cpu_init_r (void);
673 #if defined(CONFIG_MPC8260)
674 int prt_8260_rsr (void);
675 #elif defined(CONFIG_MPC83xx)
676 int prt_83xx_rsr (void);
679 /* $(CPU)/interrupts.c */
680 int interrupt_init (void);
681 void timer_interrupt (struct pt_regs
*);
682 void external_interrupt (struct pt_regs
*);
683 void irq_install_handler(int, interrupt_handler_t
*, void *);
684 void irq_free_handler (int);
685 void reset_timer (void);
686 ulong
get_timer (ulong base
);
688 /* Return value of monotonic microsecond timer */
689 unsigned long timer_get_us(void);
691 void enable_interrupts (void);
692 int disable_interrupts (void);
694 /* $(CPU)/.../commproc.c */
695 int dpram_init (void);
696 uint
dpram_base(void);
697 uint
dpram_base_align(uint align
);
698 uint
dpram_alloc(uint size
);
699 uint
dpram_alloc_align(uint size
,uint align
);
700 void bootcount_store (ulong
);
701 ulong
bootcount_load (void);
702 #define BOOTCOUNT_MAGIC 0xB001C041
704 /* $(CPU)/.../<eth> */
705 void mii_init (void);
707 /* $(CPU)/.../lcd.c */
708 ulong
lcd_setmem (ulong
);
710 /* $(CPU)/.../video.c */
711 ulong
video_setmem (ulong
);
713 /* arch/$(ARCH)/lib/cache.c */
714 void enable_caches(void);
715 void flush_cache (unsigned long, unsigned long);
716 void flush_dcache_all(void);
717 void flush_dcache_range(unsigned long start
, unsigned long stop
);
718 void invalidate_dcache_range(unsigned long start
, unsigned long stop
);
719 void invalidate_dcache_all(void);
720 void invalidate_icache_all(void);
722 /* arch/$(ARCH)/lib/ticks.S */
723 uint64_t get_ticks(void);
724 void wait_ticks (unsigned long);
726 /* arch/$(ARCH)/lib/time.c */
727 void __udelay (unsigned long);
728 ulong
usec2ticks (unsigned long usec
);
729 ulong
ticks2usec (unsigned long ticks
);
730 int init_timebase (void);
733 int gunzip(void *, int, unsigned char *, unsigned long *);
734 int zunzip(void *dst
, int dstlen
, unsigned char *src
, unsigned long *lenp
,
735 int stoponerr
, int offset
);
738 void qsort(void *base
, size_t nmemb
, size_t size
,
739 int(*compar
)(const void *, const void *));
740 int strcmp_compar(const void *, const void *);
743 void udelay (unsigned long);
744 void mdelay(unsigned long);
750 #include <vsprintf.h>
753 char * strmhz(char *buf
, unsigned long hz
);
756 #include <u-boot/crc.h>
760 void srand(unsigned int seed
);
761 unsigned int rand(void);
762 unsigned int rand_r(unsigned int *seedp
);
764 /* common/console.c */
765 int console_init_f(void); /* Before relocation; uses the serial stuff */
766 int console_init_r(void); /* After relocation; uses the console stuff */
767 int console_assign(int file
, const char *devname
); /* Assign the console */
769 int had_ctrlc (void); /* have we had a Control-C since last clear? */
770 void clear_ctrlc (void); /* clear the Control-C condition */
771 int disable_ctrlc (int); /* 1 to disable, 0 to enable Control-C detect */
772 int confirm_yesno(void); /* 1 if input is "y", "Y", "yes" or "YES" */
774 * STDIO based functions (can always be used)
777 int serial_printf (const char *fmt
, ...)
778 __attribute__ ((format (__printf__
, 1, 2)));
784 void putc(const char c
);
785 void puts(const char *s
);
786 int printf(const char *fmt
, ...)
787 __attribute__ ((format (__printf__
, 1, 2)));
788 int vprintf(const char *fmt
, va_list args
);
791 #define eputc(c) fputc(stderr, c)
792 #define eputs(s) fputs(stderr, s)
793 #define eprintf(fmt,args...) fprintf(stderr,fmt ,##args)
796 * FILE based functions (can only be used AFTER relocation!)
803 int fprintf(int file
, const char *fmt
, ...)
804 __attribute__ ((format (__printf__
, 2, 3)));
805 void fputs(int file
, const char *s
);
806 void fputc(int file
, const char c
);
811 int gzip(void *dst
, unsigned long *lenp
,
812 unsigned char *src
, unsigned long srclen
);
813 int zzip(void *dst
, unsigned long *lenp
, unsigned char *src
,
814 unsigned long srclen
, int stoponerr
,
815 int (*func
)(unsigned long, unsigned long));
817 /* lib/net_utils.c */
819 static inline IPaddr_t
getenv_IPaddr(char *var
)
821 return string_to_ip(getenv(var
));
825 * CONSOLE multiplexing.
827 #ifdef CONFIG_CONSOLE_MUX
831 int pcmcia_init (void);
833 #ifdef CONFIG_STATUS_LED
834 # include <status_led.h>
837 #include <bootstage.h>
839 #ifdef CONFIG_SHOW_ACTIVITY
840 void show_activity(int arg
);
843 /* Multicore arch functions */
845 int cpu_status(int nr
);
846 int cpu_reset(int nr
);
847 int cpu_disable(int nr
);
848 int cpu_release(int nr
, int argc
, char * const argv
[]);
851 /* Define a null map_sysmem() if the architecture doesn't use it */
852 # ifndef CONFIG_ARCH_MAP_SYSMEM
853 static inline void *map_sysmem(phys_addr_t paddr
, unsigned long len
)
855 return (void *)(uintptr_t)paddr
;
858 static inline void unmap_sysmem(const void *vaddr
)
862 static inline phys_addr_t
map_to_sysmem(const void *ptr
)
864 return (phys_addr_t
)(uintptr_t)ptr
;
868 #endif /* __ASSEMBLY__ */
872 * Has to be included outside of the #ifndef __ASSEMBLY__ section.
873 * Otherwise might lead to compilation errors in assembler files.
875 #include <asm/cache.h>
878 /* Put only stuff here that the assembler can digest */
881 #define CONFIG_HAS_POST
882 #ifndef CONFIG_POST_ALT_LIST
883 #define CONFIG_POST_STD_LIST
887 #ifdef CONFIG_INIT_CRITICAL
888 #error CONFIG_INIT_CRITICAL is deprecated!
889 #error Read section CONFIG_SKIP_LOWLEVEL_INIT in README.
892 #define ROUND(a,b) (((a) + (b) - 1) & ~((b) - 1))
895 * ARCH_DMA_MINALIGN is defined in asm/cache.h for each architecture. It
896 * is used to align DMA buffers.
899 #include <asm/cache.h>
903 * The ALLOC_CACHE_ALIGN_BUFFER macro is used to allocate a buffer on the
904 * stack that meets the minimum architecture alignment requirements for DMA.
905 * Such a buffer is useful for DMA operations where flushing and invalidating
906 * the cache before and after a read and/or write operation is required for
907 * correct operations.
909 * When called the macro creates an array on the stack that is sized such
912 * 1) The beginning of the array can be advanced enough to be aligned.
914 * 2) The size of the aligned portion of the array is a multiple of the minimum
915 * architecture alignment required for DMA.
917 * 3) The aligned portion contains enough space for the original number of
918 * elements requested.
920 * The macro then creates a pointer to the aligned portion of this array and
921 * assigns to the pointer the address of the first element in the aligned
922 * portion of the array.
924 * Calling the macro as:
926 * ALLOC_CACHE_ALIGN_BUFFER(uint32_t, buffer, 1024);
928 * Will result in something similar to saying:
930 * uint32_t buffer[1024];
932 * The following differences exist:
934 * 1) The resulting buffer is guaranteed to be aligned to the value of
937 * 2) The buffer variable created by the macro is a pointer to the specified
938 * type, and NOT an array of the specified type. This can be very important
939 * if you want the address of the buffer, which you probably do, to pass it
940 * to the DMA hardware. The value of &buffer is different in the two cases.
941 * In the macro case it will be the address of the pointer, not the address
942 * of the space reserved for the buffer. However, in the second case it
943 * would be the address of the buffer. So if you are replacing hard coded
944 * stack buffers with this macro you need to make sure you remove the & from
945 * the locations where you are taking the address of the buffer.
947 * Note that the size parameter is the number of array elements to allocate,
948 * not the number of bytes.
950 * This macro can not be used outside of function scope, or for the creation
951 * of a function scoped static buffer. It can not be used to create a cache
952 * line aligned global buffer.
954 #define PAD_COUNT(s, pad) (((s) - 1) / (pad) + 1)
955 #define PAD_SIZE(s, pad) (PAD_COUNT(s, pad) * pad)
956 #define ALLOC_ALIGN_BUFFER_PAD(type, name, size, align, pad) \
957 char __##name[ROUND(PAD_SIZE((size) * sizeof(type), pad), align) \
960 type *name = (type *) ALIGN((uintptr_t)__##name, align)
961 #define ALLOC_ALIGN_BUFFER(type, name, size, align) \
962 ALLOC_ALIGN_BUFFER_PAD(type, name, size, align, 1)
963 #define ALLOC_CACHE_ALIGN_BUFFER_PAD(type, name, size, pad) \
964 ALLOC_ALIGN_BUFFER_PAD(type, name, size, ARCH_DMA_MINALIGN, pad)
965 #define ALLOC_CACHE_ALIGN_BUFFER(type, name, size) \
966 ALLOC_ALIGN_BUFFER(type, name, size, ARCH_DMA_MINALIGN)
969 * DEFINE_CACHE_ALIGN_BUFFER() is similar to ALLOC_CACHE_ALIGN_BUFFER, but it's
970 * purpose is to allow allocating aligned buffers outside of function scope.
971 * Usage of this macro shall be avoided or used with extreme care!
973 #define DEFINE_ALIGN_BUFFER(type, name, size, align) \
974 static char __##name[ALIGN(size * sizeof(type), align)] \
977 static type *name = (type *)__##name
978 #define DEFINE_CACHE_ALIGN_BUFFER(type, name, size) \
979 DEFINE_ALIGN_BUFFER(type, name, size, ARCH_DMA_MINALIGN)
981 /* Pull in stuff for the build system */
983 # include <environment.h>
986 #endif /* __COMMON_H_ */