]> git.ipfire.org Git - thirdparty/u-boot.git/blob - include/common.h
env: Move env_get_yesno() to env.h
[thirdparty/u-boot.git] / include / common.h
1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3 * (C) Copyright 2000-2009
4 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
5 */
6
7 #ifndef __COMMON_H_
8 #define __COMMON_H_ 1
9
10 #ifndef __ASSEMBLY__ /* put C only stuff in this section */
11
12 typedef unsigned char uchar;
13 typedef volatile unsigned long vu_long;
14 typedef volatile unsigned short vu_short;
15 typedef volatile unsigned char vu_char;
16
17 #include <config.h>
18 #include <errno.h>
19 #include <time.h>
20 #include <asm-offsets.h>
21 #include <linux/bitops.h>
22 #include <linux/bug.h>
23 #include <linux/delay.h>
24 #include <linux/types.h>
25 #include <linux/printk.h>
26 #include <linux/string.h>
27 #include <linux/stringify.h>
28 #include <asm/ptrace.h>
29 #include <stdarg.h>
30 #include <stdio.h>
31 #include <linux/kernel.h>
32
33 #include <part.h>
34 #include <flash.h>
35 #include <image.h>
36
37 #ifdef __LP64__
38 #define CONFIG_SYS_SUPPORT_64BIT_DATA
39 #endif
40
41 #include <log.h>
42
43 typedef void (interrupt_handler_t)(void *);
44
45 #include <asm/u-boot.h> /* boot information for Linux kernel */
46 #include <asm/global_data.h> /* global data used for startup functions */
47
48 #if defined(CONFIG_ENV_IS_EMBEDDED)
49 #define TOTAL_MALLOC_LEN CONFIG_SYS_MALLOC_LEN
50 #elif ( ((CONFIG_ENV_ADDR+CONFIG_ENV_SIZE) < CONFIG_SYS_MONITOR_BASE) || \
51 (CONFIG_ENV_ADDR >= (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)) ) || \
52 defined(CONFIG_ENV_IS_IN_NVRAM)
53 #define TOTAL_MALLOC_LEN (CONFIG_SYS_MALLOC_LEN + CONFIG_ENV_SIZE)
54 #else
55 #define TOTAL_MALLOC_LEN CONFIG_SYS_MALLOC_LEN
56 #endif
57
58 /* startup functions, used in:
59 * common/board_f.c
60 * common/init/board_init.c
61 * common/board_r.c
62 * common/board_info.c
63 */
64 #include <init.h>
65
66 /*
67 * Function Prototypes
68 */
69 void hang (void) __attribute__ ((noreturn));
70
71 int cpu_init(void);
72
73 #include <display_options.h>
74
75 /* common/main.c */
76 void main_loop (void);
77 int run_command(const char *cmd, int flag);
78 int run_command_repeatable(const char *cmd, int flag);
79
80 /**
81 * Run a list of commands separated by ; or even \0
82 *
83 * Note that if 'len' is not -1, then the command does not need to be nul
84 * terminated, Memory will be allocated for the command in that case.
85 *
86 * @param cmd List of commands to run, each separated bu semicolon
87 * @param len Length of commands excluding terminator if known (-1 if not)
88 * @param flag Execution flags (CMD_FLAG_...)
89 * @return 0 on success, or != 0 on error.
90 */
91 int run_command_list(const char *cmd, int len, int flag);
92
93 int checkflash(void);
94 int checkdram(void);
95 extern u8 __dtb_dt_begin[]; /* embedded device tree blob */
96 extern u8 __dtb_dt_spl_begin[]; /* embedded device tree blob for SPL/TPL */
97 int mdm_init(void);
98
99 /**
100 * Show the DRAM size in a board-specific way
101 *
102 * This is used by boards to display DRAM information in their own way.
103 *
104 * @param size Size of DRAM (which should be displayed along with other info)
105 */
106 void board_show_dram(phys_size_t size);
107
108 /**
109 * Get the uppermost pointer that is valid to access
110 *
111 * Some systems may not map all of their address space. This function allows
112 * boards to indicate what their highest support pointer value is for DRAM
113 * access.
114 *
115 * @param total_size Size of U-Boot (unused?)
116 */
117 ulong board_get_usable_ram_top(ulong total_size);
118
119 /**
120 * arch_fixup_fdt() - Write arch-specific information to fdt
121 *
122 * Defined in arch/$(ARCH)/lib/bootm-fdt.c
123 *
124 * @blob: FDT blob to write to
125 * @return 0 if ok, or -ve FDT_ERR_... on failure
126 */
127 int arch_fixup_fdt(void *blob);
128
129 /* common/flash.c */
130 void flash_perror (int);
131
132 /* common/cmd_source.c */
133 int source (ulong addr, const char *fit_uname);
134
135 extern ulong load_addr; /* Default Load Address */
136 extern ulong save_addr; /* Default Save Address */
137 extern ulong save_size; /* Default Save Size */
138
139 /* common/cmd_net.c */
140 int do_tftpb(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]);
141
142 /* common/cmd_fat.c */
143 int do_fat_fsload(cmd_tbl_t *, int, int, char * const []);
144
145 /* common/cmd_ext2.c */
146 int do_ext2load(cmd_tbl_t *, int, int, char * const []);
147
148 /**
149 * env_get() - Look up the value of an environment variable
150 *
151 * In U-Boot proper this can be called before relocation (which is when the
152 * environment is loaded from storage, i.e. GD_FLG_ENV_READY is 0). In that
153 * case this function calls env_get_f().
154 *
155 * @varname: Variable to look up
156 * @return value of variable, or NULL if not found
157 */
158 char *env_get(const char *varname);
159
160 /**
161 * env_get_hex() - Return an environment variable as a hex value
162 *
163 * Decode an environment as a hex number (it may or may not have a 0x
164 * prefix). If the environment variable cannot be found, or does not start
165 * with hex digits, the default value is returned.
166 *
167 * @varname: Variable to decode
168 * @default_val: Value to return on error
169 */
170 ulong env_get_hex(const char *varname, ulong default_val);
171
172 /**
173 * env_set() - set an environment variable
174 *
175 * This sets or deletes the value of an environment variable. For setting the
176 * value the variable is created if it does not already exist.
177 *
178 * @varname: Variable to adjust
179 * @value: Value to set for the variable, or NULL or "" to delete the variable
180 * @return 0 if OK, 1 on error
181 */
182 int env_set(const char *varname, const char *value);
183
184 void pci_init_board(void);
185
186 /* common/exports.c */
187 void jumptable_init(void);
188
189 /* common/kallsysm.c */
190 const char *symbol_lookup(unsigned long addr, unsigned long *caddr);
191
192 /* common/memsize.c */
193 long get_ram_size (long *, long);
194 phys_size_t get_effective_memsize(void);
195
196 /* $(BOARD)/$(BOARD).c */
197 void reset_phy (void);
198 void fdc_hw_init (void);
199
200 /* $(BOARD)/eeprom.c */
201 #ifdef CONFIG_CMD_EEPROM
202 void eeprom_init (int bus);
203 int eeprom_read (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt);
204 int eeprom_write (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt);
205 #else
206 /*
207 * Some EEPROM code is depecated because it used the legacy I2C interface. Add
208 * some macros here so we don't have to touch every one of those uses
209 */
210 #define eeprom_init(bus)
211 #define eeprom_read(dev_addr, offset, buffer, cnt) ((void)-ENOSYS)
212 #define eeprom_write(dev_addr, offset, buffer, cnt) ((void)-ENOSYS)
213 #endif
214
215 #if !defined(CONFIG_ENV_EEPROM_IS_ON_I2C) && defined(CONFIG_SYS_I2C_EEPROM_ADDR)
216 # define CONFIG_SYS_DEF_EEPROM_ADDR CONFIG_SYS_I2C_EEPROM_ADDR
217 #endif
218
219 /* $(BOARD)/$(BOARD).c */
220 int board_early_init_f (void);
221 int board_fix_fdt (void *rw_fdt_blob); /* manipulate the U-Boot fdt before its relocation */
222 int board_late_init (void);
223 int board_postclk_init (void); /* after clocks/timebase, before env/serial */
224 int board_early_init_r (void);
225
226 #if defined(CONFIG_SYS_DRAM_TEST)
227 int testdram(void);
228 #endif /* CONFIG_SYS_DRAM_TEST */
229
230 /* $(CPU)/start.S */
231 int icache_status (void);
232 void icache_enable (void);
233 void icache_disable(void);
234 int dcache_status (void);
235 void dcache_enable (void);
236 void dcache_disable(void);
237 void mmu_disable(void);
238 #if defined(CONFIG_ARM)
239 void relocate_code(ulong);
240 #else
241 void relocate_code(ulong, gd_t *, ulong) __attribute__ ((noreturn));
242 #endif
243 ulong get_endaddr (void);
244 void trap_init (ulong);
245
246 /* $(CPU)/cpu.c */
247 static inline int cpumask_next(int cpu, unsigned int mask)
248 {
249 for (cpu++; !((1 << cpu) & mask); cpu++)
250 ;
251
252 return cpu;
253 }
254
255 #define for_each_cpu(iter, cpu, num_cpus, mask) \
256 for (iter = 0, cpu = cpumask_next(-1, mask); \
257 iter < num_cpus; \
258 iter++, cpu = cpumask_next(cpu, mask)) \
259
260 int cpu_numcores (void);
261 int cpu_num_dspcores(void);
262 u32 cpu_mask (void);
263 u32 cpu_dsp_mask(void);
264 int is_core_valid (unsigned int);
265
266 void s_init(void);
267
268 int checkcpu (void);
269 int checkicache (void);
270 int checkdcache (void);
271 void upmconfig (unsigned int, unsigned int *, unsigned int);
272 ulong get_tbclk (void);
273 void reset_misc (void);
274 void reset_cpu (ulong addr);
275 void ft_cpu_setup(void *blob, bd_t *bd);
276 void ft_pci_setup(void *blob, bd_t *bd);
277
278 void smp_set_core_boot_addr(unsigned long addr, int corenr);
279 void smp_kick_all_cpus(void);
280
281 /* $(CPU)/serial.c */
282 int serial_init (void);
283 void serial_setbrg (void);
284 void serial_putc (const char);
285 void serial_putc_raw(const char);
286 void serial_puts (const char *);
287 int serial_getc (void);
288 int serial_tstc (void);
289
290 /* $(CPU)/speed.c */
291 int get_clocks (void);
292 ulong get_bus_freq (ulong);
293 int get_serial_clock(void);
294
295 /* $(CPU)/interrupts.c */
296 int interrupt_init (void);
297 void timer_interrupt (struct pt_regs *);
298 void external_interrupt (struct pt_regs *);
299 void irq_install_handler(int, interrupt_handler_t *, void *);
300 void irq_free_handler (int);
301 void reset_timer (void);
302
303 /* Return value of monotonic microsecond timer */
304 unsigned long timer_get_us(void);
305
306 void enable_interrupts (void);
307 int disable_interrupts (void);
308
309 /* $(CPU)/.../commproc.c */
310 void bootcount_store (ulong);
311 ulong bootcount_load (void);
312
313 /* $(CPU)/.../<eth> */
314 void mii_init (void);
315
316 /* arch/$(ARCH)/lib/cache.c */
317 void enable_caches(void);
318 void flush_cache (unsigned long, unsigned long);
319 void flush_dcache_all(void);
320 void flush_dcache_range(unsigned long start, unsigned long stop);
321 void invalidate_dcache_range(unsigned long start, unsigned long stop);
322 void invalidate_dcache_all(void);
323 void invalidate_icache_all(void);
324
325 enum {
326 /* Disable caches (else flush caches but leave them active) */
327 CBL_DISABLE_CACHES = 1 << 0,
328 CBL_SHOW_BOOTSTAGE_REPORT = 1 << 1,
329
330 CBL_ALL = 3,
331 };
332
333 /**
334 * Clean up ready for linux
335 *
336 * @param flags Flags to control what is done
337 */
338 int cleanup_before_linux_select(int flags);
339
340 /* arch/$(ARCH)/lib/ticks.S */
341 uint64_t get_ticks(void);
342 void wait_ticks (unsigned long);
343
344 /* arch/$(ARCH)/lib/time.c */
345 ulong usec2ticks (unsigned long usec);
346 ulong ticks2usec (unsigned long ticks);
347
348 /* lib/lz4_wrapper.c */
349 int ulz4fn(const void *src, size_t srcn, void *dst, size_t *dstn);
350
351 /* lib/qsort.c */
352 void qsort(void *base, size_t nmemb, size_t size,
353 int(*compar)(const void *, const void *));
354 int strcmp_compar(const void *, const void *);
355
356 /* lib/uuid.c */
357 #include <uuid.h>
358
359 /* lib/vsprintf.c */
360 #include <vsprintf.h>
361
362 /* lib/strmhz.c */
363 char * strmhz(char *buf, unsigned long hz);
364
365 /* lib/crc32.c */
366 #include <u-boot/crc.h>
367
368 /* lib/rand.c */
369 #define RAND_MAX -1U
370 void srand(unsigned int seed);
371 unsigned int rand(void);
372 unsigned int rand_r(unsigned int *seedp);
373
374 /*
375 * STDIO based functions (can always be used)
376 */
377 /* serial stuff */
378 int serial_printf (const char *fmt, ...)
379 __attribute__ ((format (__printf__, 1, 2)));
380
381 /* lib/net_utils.c */
382 #include <net.h>
383 static inline struct in_addr env_get_ip(char *var)
384 {
385 return string_to_ip(env_get(var));
386 }
387
388 int pcmcia_init (void);
389
390 #ifdef CONFIG_LED_STATUS
391 # include <status_led.h>
392 #endif
393
394 #include <bootstage.h>
395
396 #ifdef CONFIG_SHOW_ACTIVITY
397 void show_activity(int arg);
398 #endif
399
400 /* Multicore arch functions */
401 #ifdef CONFIG_MP
402 int cpu_status(u32 nr);
403 int cpu_reset(u32 nr);
404 int cpu_disable(u32 nr);
405 int cpu_release(u32 nr, int argc, char * const argv[]);
406 #endif
407
408 #else /* __ASSEMBLY__ */
409
410 #endif /* __ASSEMBLY__ */
411
412 /* Put only stuff here that the assembler can digest */
413
414 #ifdef CONFIG_POST
415 #define CONFIG_HAS_POST
416 #ifndef CONFIG_POST_ALT_LIST
417 #define CONFIG_POST_STD_LIST
418 #endif
419 #endif
420
421 #define ROUND(a,b) (((a) + (b) - 1) & ~((b) - 1))
422
423 /*
424 * check_member() - Check the offset of a structure member
425 *
426 * @structure: Name of structure (e.g. global_data)
427 * @member: Name of member (e.g. baudrate)
428 * @offset: Expected offset in bytes
429 */
430 #define check_member(structure, member, offset) _Static_assert( \
431 offsetof(struct structure, member) == offset, \
432 "`struct " #structure "` offset for `" #member "` is not " #offset)
433
434 /* Avoid using CONFIG_EFI_STUB directly as we may boot from other loaders */
435 #ifdef CONFIG_EFI_STUB
436 #define ll_boot_init() false
437 #else
438 #define ll_boot_init() true
439 #endif
440
441 /* Pull in stuff for the build system */
442 #ifdef DO_DEPS_ONLY
443 # include <environment.h>
444 #endif
445
446 #endif /* __COMMON_H_ */