include/configs/ADCIOP.h

   1 /*
   2  * (C) Copyright 2001
   3  * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
   4  *
   5  * See file CREDITS for list of people who contributed to this
   6  * project.
   7  *
   8  * This program is free software; you can redistribute it and/or
   9  * modify it under the terms of the GNU General Public License as
  10  * published by the Free Software Foundation; either version 2 of
  11  * the License, or (at your option) any later version.
  12  *
  13  * This program is distributed in the hope that it will be useful,
  14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  16  * GNU General Public License for more details.
  17  *
  18  * You should have received a copy of the GNU General Public License
  19  * along with this program; if not, write to the Free Software
  20  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  21  * MA 02111-1307 USA
  22  */
  23
  24 /*
  25  * board/config.h - configuration options, board specific
  26  */
  27
  28 #ifndef __CONFIG_H
  29 #define __CONFIG_H
  30
  31 /*
  32  * High Level Configuration Options
  33  * (easy to change)
  34  */
  35
  36 #define CONFIG_IOP480           1       /* This is a IOP480 CPU         */
  37 #define CONFIG_ADCIOP           1       /* ...on a ADCIOP board         */
  38
  39 #define CONFIG_BOARD_EARLY_INIT_F 1     /* call board_early_init_f()    */
  40
  41 #define CONFIG_CLOCKS_IN_MHZ    1       /* clocks passsed to Linux in MHz */
  42
  43 #define CONFIG_CPUCLOCK         66
  44 #define CONFIG_BUSCLOCK         (CONFIG_CPUCLOCK)
  45
  46 #define CONFIG_BAUDRATE         9600
  47 #define CONFIG_BOOTDELAY        3       /* autoboot after 3 seconds     */
  48 #define CONFIG_BOOTCOMMAND      "bootm ffc00000" /* autoboot command    */
  49
  50 #undef  CONFIG_BOOTARGS
  51
  52 #define CONFIG_LOADS_ECHO       1       /* echo on for serial download  */
  53 #define CONFIG_SYS_LOADS_BAUD_CHANGE    1       /* allow baudrate change        */
  54
  55 #undef CONFIG_WATCHDOG                  /* watchdog disabled            */
  56
  57 #define CONFIG_PHY_ADDR         0       /* PHY address                  */
  58
  59 #define CONFIG_IPADDR           10.0.18.222
  60 #define CONFIG_SERVERIP         10.0.18.190
  61
  62
  63 /*
  64  * BOOTP options
  65  */
  66 #define CONFIG_BOOTP_BOOTFILESIZE
  67 #define CONFIG_BOOTP_BOOTPATH
  68 #define CONFIG_BOOTP_GATEWAY
  69 #define CONFIG_BOOTP_HOSTNAME
  70
  71 /*
  72  * Command line configuration.
  73  */
  74 #include <config_cmd_default.h>
  75
  76 #define CONFIG_CMD_DHCP
  77 #define CONFIG_CMD_IRQ
  78 #define CONFIG_CMD_ELF
  79 #define CONFIG_CMD_ASKENV
  80
  81
  82 /*
  83  * Miscellaneous configurable options
  84  */
  85 #define CONFIG_SYS_LONGHELP                     /* undef to save memory         */
  86 #define CONFIG_SYS_PROMPT       "=> "           /* Monitor Command Prompt       */
  87 #if defined(CONFIG_CMD_KGDB)
  88 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size      */
  89 #else
  90 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size      */
  91 #endif
  92 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
  93 #define CONFIG_SYS_MAXARGS      16              /* max number of command args   */
  94 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size    */
  95
  96 #define CONFIG_SYS_CONSOLE_INFO_QUIET   1       /* don't print console @ startup*/
  97
  98 #define CONFIG_SYS_MEMTEST_START        0x0400000       /* memtest works on     */
  99 #define CONFIG_SYS_MEMTEST_END          0x0C00000       /* 4 ... 12 MB in DRAM  */
 100
 101 /* The following table includes the supported baudrates */
 102 #define CONFIG_SYS_BAUDRATE_TABLE       \
 103         { 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 }
 104
 105 #define CONFIG_SYS_LOAD_ADDR    0x100000        /* default load address */
 106
 107 #define CONFIG_SYS_HZ           1000            /* decrementer freq: 1 ms ticks */
 108
 109 #define CONFIG_ZERO_BOOTDELAY_CHECK     /* check for keypress on bootdelay==0 */
 110
 111 /*-----------------------------------------------------------------------
 112  * Definitions for initial stack pointer and data area (in DPRAM)
 113  */
 114 #define CONFIG_SYS_INIT_RAM_ADDR        0x00df0000 /* inside of SDRAM                   */
 115 #define CONFIG_SYS_INIT_RAM_END 0x0f00  /* End of used area in RAM             */
 116 #define CONFIG_SYS_GBL_DATA_SIZE        64  /* size in bytes reserved for initial data */
 117 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
 118 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 119
 120 /*-----------------------------------------------------------------------
 121  * Start addresses for the final memory configuration
 122  * (Set up by the startup code)
 123  * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
 124  */
 125 #define CONFIG_SYS_SDRAM_BASE           0x00000000
 126 #define CONFIG_SYS_FLASH_BASE           0xFFFD0000
 127 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
 128 #define CONFIG_SYS_MONITOR_LEN          (192 << 10)     /* Reserve 192 kB for Monitor   */
 129 #define CONFIG_SYS_MALLOC_LEN           (128 << 10)     /* Reserve 128 kB for malloc()  */
 130
 131 /*
 132  * For booting Linux, the board info and command line data
 133  * have to be in the first 8 MB of memory, since this is
 134  * the maximum mapped by the Linux kernel during initialization.
 135  */
 136 #define CONFIG_SYS_BOOTMAPSZ            (8 << 20)       /* Initial Memory map for Linux */
 137 /*-----------------------------------------------------------------------
 138  * FLASH organization
 139  */
 140 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* max number of memory banks           */
 141 #define CONFIG_SYS_MAX_FLASH_SECT       256     /* max number of sectors on one chip    */
 142
 143 #define CONFIG_SYS_FLASH_ERASE_TOUT     120000  /* Timeout for Flash Erase (in ms)      */
 144 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Timeout for Flash Write (in ms)      */
 145
 146 #define CONFIG_SYS_FLASH_WORD_SIZE      unsigned char   /* flash word size (width)      */
 147 #define CONFIG_SYS_FLASH_ADDR0          0x0AA9  /* 1st address for flash config cycles  */
 148 #define CONFIG_SYS_FLASH_ADDR1          0x0556  /* 2nd address for flash config cycles  */
 149 /*
 150  * The following defines are added for buggy IOP480 byte interface.
 151  * All other boards should use the standard values (CPCI405 etc.)
 152  */
 153 #define CONFIG_SYS_FLASH_READ0          0x0002  /* 0 is standard                        */
 154 #define CONFIG_SYS_FLASH_READ1          0x0000  /* 1 is standard                        */
 155 #define CONFIG_SYS_FLASH_READ2          0x0004  /* 2 is standard                        */
 156
 157 #define CONFIG_SYS_FLASH_EMPTY_INFO             /* print 'E' for empty sector on flinfo */
 158
 159 #if 1 /* Use NVRAM for environment variables */
 160 /*-----------------------------------------------------------------------
 161  * NVRAM organization
 162  */
 163 #define CONFIG_ENV_IS_IN_NVRAM  1       /* use NVRAM for environment vars       */
 164 #define CONFIG_SYS_NVRAM_BASE_ADDR      0x10000000              /* NVRAM base address   */
 165 #define CONFIG_SYS_NVRAM_SIZE           (32*1024)               /* NVRAM size           */
 166 #define CONFIG_ENV_SIZE         0x0400          /* Size of Environment vars     */
 167 #define CONFIG_ENV_ADDR         \
 168         (CONFIG_SYS_NVRAM_BASE_ADDR+CONFIG_SYS_NVRAM_SIZE-CONFIG_ENV_SIZE)      /* Env  */
 169 #define CONFIG_SYS_VXWORKS_MAC_PTR     (CONFIG_SYS_NVRAM_BASE_ADDR+0x7800) /* VxWorks eth-addr*/
 170
 171 #else /* Use FLASH for environment variables */
 172
 173 #define CONFIG_ENV_IS_IN_FLASH  1
 174 #define CONFIG_ENV_OFFSET               0x00010000      /* Offset of Environment Sector */
 175 #define CONFIG_ENV_SIZE         0x1000  /* Total Size of Environment Sector     */
 176
 177 #define CONFIG_ENV_SECT_SIZE    0x8000  /* see README - env sector total size   */
 178
 179 #endif
 180
 181 /*-----------------------------------------------------------------------
 182  * PCI stuff
 183  */
 184 #define CONFIG_PCI                      /* include pci support                  */
 185 #undef CONFIG_PCI_PNP
 186
 187 #define CONFIG_NET_MULTI                /* Multi ethernet cards support         */
 188
 189 #define CONFIG_TULIP
 190
 191 #define CONFIG_SYS_ETH_DEV_FN        0x0000
 192 #define CONFIG_SYS_ETH_IOBASE        0x0fff0000
 193
 194 /*
 195  * Init Memory Controller:
 196  *
 197  * BR0/1 and OR0/1 (FLASH)
 198  */
 199
 200 #define FLASH_BASE0_PRELIM      0xFFC00000      /* FLASH bank #0        */
 201 #define FLASH_BASE1_PRELIM      0xFFE00000      /* FLASH bank #1        */
 202
 203
 204 /*
 205  * Internal Definitions
 206  *
 207  * Boot Flags
 208  */
 209 #define BOOTFLAG_COLD   0x01            /* Normal Power-On: Boot from FLASH     */
 210 #define BOOTFLAG_WARM   0x02            /* Software reboot                      */
 211
 212 #endif  /* __CONFIG_H */