include/configs/B4860QDS.h

   1 /*
   2  * Copyright 2011-2012 Freescale Semiconductor, Inc.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 #ifndef __CONFIG_H
   8 #define __CONFIG_H
   9
  10 /*
  11  * B4860 QDS board configuration file
  12  */
  13 #define CONFIG_B4860QDS
  14 #define CONFIG_PHYS_64BIT
  15
  16 #ifdef CONFIG_RAMBOOT_PBL
  17 #define CONFIG_SYS_FSL_PBL_PBI  $(SRCTREE)/board/freescale/b4860qds/b4_pbi.cfg
  18 #define CONFIG_SYS_FSL_PBL_RCW  $(SRCTREE)/board/freescale/b4860qds/b4_rcw.cfg
  19 #ifndef CONFIG_NAND
  20 #define CONFIG_RAMBOOT_TEXT_BASE        CONFIG_SYS_TEXT_BASE
  21 #define CONFIG_RESET_VECTOR_ADDRESS     0xfffffffc
  22 #else
  23 #define CONFIG_SPL
  24 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
  25 #define CONFIG_SPL_ENV_SUPPORT
  26 #define CONFIG_SPL_SERIAL_SUPPORT
  27 #define CONFIG_SPL_FLUSH_IMAGE
  28 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
  29 #define CONFIG_SPL_LIBGENERIC_SUPPORT
  30 #define CONFIG_SPL_LIBCOMMON_SUPPORT
  31 #define CONFIG_SPL_I2C_SUPPORT
  32 #define CONFIG_SPL_DRIVERS_MISC_SUPPORT
  33 #define CONFIG_FSL_LAW                 /* Use common FSL init code */
  34 #define CONFIG_SYS_TEXT_BASE            0x00201000
  35 #define CONFIG_SPL_TEXT_BASE            0xFFFD8000
  36 #define CONFIG_SPL_PAD_TO               0x40000
  37 #define CONFIG_SPL_MAX_SIZE             0x28000
  38 #define RESET_VECTOR_OFFSET             0x27FFC
  39 #define BOOT_PAGE_OFFSET                0x27000
  40 #define CONFIG_SPL_NAND_SUPPORT
  41 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (768 << 10)
  42 #define CONFIG_SYS_NAND_U_BOOT_DST      0x00200000
  43 #define CONFIG_SYS_NAND_U_BOOT_START    0x00200000
  44 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (256 << 10)
  45 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
  46 #define CONFIG_SPL_NAND_BOOT
  47 #ifdef CONFIG_SPL_BUILD
  48 #define CONFIG_SPL_SKIP_RELOCATE
  49 #define CONFIG_SPL_COMMON_INIT_DDR
  50 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
  51 #define CONFIG_SYS_NO_FLASH
  52 #endif
  53 #endif
  54 #endif
  55
  56 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
  57 /* Set 1M boot space */
  58 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000)
  59 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \
  60                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR)
  61 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
  62 #define CONFIG_SYS_NO_FLASH
  63 #endif
  64
  65 /* High Level Configuration Options */
  66 #define CONFIG_BOOKE
  67 #define CONFIG_E500                     /* BOOKE e500 family */
  68 #define CONFIG_E500MC                   /* BOOKE e500mc family */
  69 #define CONFIG_SYS_BOOK3E_HV            /* Category E.HV supported */
  70 #define CONFIG_MP                       /* support multiple processors */
  71
  72 #ifndef CONFIG_SYS_TEXT_BASE
  73 #define CONFIG_SYS_TEXT_BASE    0xeff40000
  74 #endif
  75
  76 #ifndef CONFIG_RESET_VECTOR_ADDRESS
  77 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
  78 #endif
  79
  80 #define CONFIG_SYS_FSL_CPC              /* Corenet Platform Cache */
  81 #define CONFIG_SYS_NUM_CPC              CONFIG_NUM_DDR_CONTROLLERS
  82 #define CONFIG_FSL_IFC                  /* Enable IFC Support */
  83 #define CONFIG_PCI                      /* Enable PCI/PCIE */
  84 #define CONFIG_PCIE1                    /* PCIE controler 1 */
  85 #define CONFIG_FSL_PCI_INIT             /* Use common FSL init code */
  86 #define CONFIG_SYS_PCI_64BIT            /* enable 64-bit PCI resources */
  87
  88 #ifndef CONFIG_PPC_B4420
  89 #define CONFIG_SYS_SRIO
  90 #define CONFIG_SRIO1                    /* SRIO port 1 */
  91 #define CONFIG_SRIO2                    /* SRIO port 2 */
  92 #define CONFIG_SRIO_PCIE_BOOT_MASTER
  93 #endif
  94
  95 #define CONFIG_FSL_LAW                  /* Use common FSL init code */
  96
  97 /* I2C bus multiplexer */
  98 #define I2C_MUX_PCA_ADDR                0x77
  99
 100 /* VSC Crossbar switches */
 101 #define CONFIG_VSC_CROSSBAR
 102 #define I2C_CH_DEFAULT                  0x8
 103 #define I2C_CH_VSC3316                  0xc
 104 #define I2C_CH_VSC3308                  0xd
 105
 106 #define VSC3316_TX_ADDRESS              0x70
 107 #define VSC3316_RX_ADDRESS              0x71
 108 #define VSC3308_TX_ADDRESS              0x02
 109 #define VSC3308_RX_ADDRESS              0x03
 110
 111 /* IDT clock synthesizers */
 112 #define CONFIG_IDT8T49N222A
 113 #define I2C_CH_IDT                     0x9
 114
 115 #define IDT_SERDES1_ADDRESS            0x6E
 116 #define IDT_SERDES2_ADDRESS            0x6C
 117
 118 #define CONFIG_ENV_OVERWRITE
 119
 120 #ifdef CONFIG_SYS_NO_FLASH
 121 #if !defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) && !defined(CONFIG_RAMBOOT_PBL)
 122 #define CONFIG_ENV_IS_NOWHERE
 123 #endif
 124 #else
 125 #define CONFIG_FLASH_CFI_DRIVER
 126 #define CONFIG_SYS_FLASH_CFI
 127 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 128 #endif
 129
 130 #if defined(CONFIG_SPIFLASH)
 131 #define CONFIG_SYS_EXTRA_ENV_RELOC
 132 #define CONFIG_ENV_IS_IN_SPI_FLASH
 133 #define CONFIG_ENV_SPI_BUS              0
 134 #define CONFIG_ENV_SPI_CS               0
 135 #define CONFIG_ENV_SPI_MAX_HZ           10000000
 136 #define CONFIG_ENV_SPI_MODE             0
 137 #define CONFIG_ENV_SIZE                 0x2000          /* 8KB */
 138 #define CONFIG_ENV_OFFSET               0x100000        /* 1MB */
 139 #define CONFIG_ENV_SECT_SIZE            0x10000
 140 #elif defined(CONFIG_SDCARD)
 141 #define CONFIG_SYS_EXTRA_ENV_RELOC
 142 #define CONFIG_ENV_IS_IN_MMC
 143 #define CONFIG_SYS_MMC_ENV_DEV          0
 144 #define CONFIG_ENV_SIZE                 0x2000
 145 #define CONFIG_ENV_OFFSET               (512 * 1097)
 146 #elif defined(CONFIG_NAND)
 147 #define CONFIG_SYS_EXTRA_ENV_RELOC
 148 #define CONFIG_ENV_IS_IN_NAND
 149 #define CONFIG_ENV_SIZE                 0x2000
 150 #define CONFIG_ENV_OFFSET               (10 * CONFIG_SYS_NAND_BLOCK_SIZE)
 151 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 152 #define CONFIG_ENV_IS_IN_REMOTE
 153 #define CONFIG_ENV_ADDR         0xffe20000
 154 #define CONFIG_ENV_SIZE         0x2000
 155 #elif defined(CONFIG_ENV_IS_NOWHERE)
 156 #define CONFIG_ENV_SIZE         0x2000
 157 #else
 158 #define CONFIG_ENV_IS_IN_FLASH
 159 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 160 #define CONFIG_ENV_SIZE         0x2000
 161 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 162 #endif
 163
 164 #ifndef __ASSEMBLY__
 165 unsigned long get_board_sys_clk(void);
 166 unsigned long get_board_ddr_clk(void);
 167 #endif
 168 #define CONFIG_SYS_CLK_FREQ     get_board_sys_clk() /* sysclk for MPC85xx */
 169 #define CONFIG_DDR_CLK_FREQ     get_board_ddr_clk()
 170
 171 /*
 172  * These can be toggled for performance analysis, otherwise use default.
 173  */
 174 #define CONFIG_SYS_CACHE_STASHING
 175 #define CONFIG_BTB                      /* toggle branch predition */
 176 #define CONFIG_DDR_ECC
 177 #ifdef CONFIG_DDR_ECC
 178 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 179 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
 180 #endif
 181
 182 #define CONFIG_ENABLE_36BIT_PHYS
 183
 184 #ifdef CONFIG_PHYS_64BIT
 185 #define CONFIG_ADDR_MAP
 186 #define CONFIG_SYS_NUM_ADDR_MAP         64      /* number of TLB1 entries */
 187 #endif
 188
 189 #if 0
 190 #define CONFIG_POST CONFIG_SYS_POST_MEMORY      /* test POST memory test */
 191 #endif
 192 #define CONFIG_SYS_MEMTEST_START        0x00200000      /* memtest works on */
 193 #define CONFIG_SYS_MEMTEST_END          0x00400000
 194 #define CONFIG_SYS_ALT_MEMTEST
 195 #define CONFIG_PANIC_HANG       /* do not reset board on panic */
 196
 197 /*
 198  *  Config the L3 Cache as L3 SRAM
 199  */
 200 #define CONFIG_SYS_INIT_L3_ADDR         0xFFFC0000
 201 #define CONFIG_SYS_L3_SIZE              256 << 10
 202 #define CONFIG_SPL_GD_ADDR              (CONFIG_SYS_INIT_L3_ADDR + 32 * 1024)
 203 #ifdef CONFIG_NAND
 204 #define CONFIG_ENV_ADDR                 (CONFIG_SPL_GD_ADDR + 4 * 1024)
 205 #endif
 206 #define CONFIG_SPL_RELOC_MALLOC_ADDR    (CONFIG_SPL_GD_ADDR + 12 * 1024)
 207 #define CONFIG_SPL_RELOC_MALLOC_SIZE    (30 << 10)
 208 #define CONFIG_SPL_RELOC_STACK          (CONFIG_SPL_GD_ADDR + 64 * 1024)
 209 #define CONFIG_SPL_RELOC_STACK_SIZE     (22 << 10)
 210
 211 #ifdef CONFIG_PHYS_64BIT
 212 #define CONFIG_SYS_DCSRBAR              0xf0000000
 213 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
 214 #endif
 215
 216 /* EEPROM */
 217 #define CONFIG_SYS_I2C_EEPROM_NXID
 218 #define CONFIG_SYS_EEPROM_BUS_NUM       0
 219 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x57
 220 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
 221 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
 222 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
 223
 224 /*
 225  * DDR Setup
 226  */
 227 #define CONFIG_VERY_BIG_RAM
 228 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 229 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 230
 231 /* CONFIG_NUM_DDR_CONTROLLERS is defined in include/asm/config_mpc85xx.h */
 232 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 233 #define CONFIG_CHIP_SELECTS_PER_CTRL    (4 * CONFIG_DIMM_SLOTS_PER_CTLR)
 234
 235 #define CONFIG_DDR_SPD
 236 #define CONFIG_SYS_DDR_RAW_TIMING
 237 #define CONFIG_SYS_FSL_DDR3
 238 #ifndef CONFIG_SPL_BUILD
 239 #define CONFIG_FSL_DDR_INTERACTIVE
 240 #endif
 241
 242 #define CONFIG_SYS_SPD_BUS_NUM  0
 243 #define SPD_EEPROM_ADDRESS1     0x51
 244 #define SPD_EEPROM_ADDRESS2     0x53
 245
 246 #define SPD_EEPROM_ADDRESS      SPD_EEPROM_ADDRESS1
 247 #define CONFIG_SYS_SDRAM_SIZE   2048    /* for fixed parameter use */
 248
 249 /*
 250  * IFC Definitions
 251  */
 252 #define CONFIG_SYS_FLASH_BASE   0xe0000000
 253 #ifdef CONFIG_PHYS_64BIT
 254 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
 255 #else
 256 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
 257 #endif
 258
 259 #define CONFIG_SYS_NOR0_CSPR_EXT        (0xf)
 260 #define CONFIG_SYS_NOR0_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \
 261                                 + 0x8000000) | \
 262                                 CSPR_PORT_SIZE_16 | \
 263                                 CSPR_MSEL_NOR | \
 264                                 CSPR_V)
 265 #define CONFIG_SYS_NOR1_CSPR_EXT        (0xf)
 266 #define CONFIG_SYS_NOR1_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
 267                                 CSPR_PORT_SIZE_16 | \
 268                                 CSPR_MSEL_NOR | \
 269                                 CSPR_V)
 270 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(128 * 1024 * 1024)
 271 /* NOR Flash Timing Params */
 272 #define CONFIG_SYS_NOR_CSOR     CSOR_NOR_ADM_SHIFT(4)
 273 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x01) | \
 274                                 FTIM0_NOR_TEADC(0x04) | \
 275                                 FTIM0_NOR_TEAHC(0x20))
 276 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
 277                                 FTIM1_NOR_TRAD_NOR(0x1A) |\
 278                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
 279 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x01) | \
 280                                 FTIM2_NOR_TCH(0x0E) | \
 281                                 FTIM2_NOR_TWPH(0x0E) | \
 282                                 FTIM2_NOR_TWP(0x1c))
 283 #define CONFIG_SYS_NOR_FTIM3    0x0
 284
 285 #define CONFIG_SYS_FLASH_QUIET_TEST
 286 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 287
 288 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* number of banks */
 289 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 290 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 291 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 292
 293 #define CONFIG_SYS_FLASH_EMPTY_INFO
 294 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS \
 295                                         + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS}
 296
 297 #define CONFIG_FSL_QIXIS        /* use common QIXIS code */
 298 #define CONFIG_FSL_QIXIS_V2
 299 #define QIXIS_BASE              0xffdf0000
 300 #ifdef CONFIG_PHYS_64BIT
 301 #define QIXIS_BASE_PHYS         (0xf00000000ull | QIXIS_BASE)
 302 #else
 303 #define QIXIS_BASE_PHYS         QIXIS_BASE
 304 #endif
 305 #define QIXIS_LBMAP_SWITCH              0x01
 306 #define QIXIS_LBMAP_MASK                0x0f
 307 #define QIXIS_LBMAP_SHIFT               0
 308 #define QIXIS_LBMAP_DFLTBANK            0x00
 309 #define QIXIS_LBMAP_ALTBANK             0x02
 310 #define QIXIS_RST_CTL_RESET             0x31
 311 #define QIXIS_RCFG_CTL_RECONFIG_IDLE    0x20
 312 #define QIXIS_RCFG_CTL_RECONFIG_START   0x21
 313 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE   0x08
 314
 315 #define CONFIG_SYS_CSPR3_EXT    (0xf)
 316 #define CONFIG_SYS_CSPR3        (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \
 317                                 | CSPR_PORT_SIZE_8 \
 318                                 | CSPR_MSEL_GPCM \
 319                                 | CSPR_V)
 320 #define CONFIG_SYS_AMASK3       IFC_AMASK(4 * 1024)
 321 #define CONFIG_SYS_CSOR3        0x0
 322 /* QIXIS Timing parameters for IFC CS3 */
 323 #define CONFIG_SYS_CS3_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 324                                         FTIM0_GPCM_TEADC(0x0e) | \
 325                                         FTIM0_GPCM_TEAHC(0x0e))
 326 #define CONFIG_SYS_CS3_FTIM1            (FTIM1_GPCM_TACO(0x0e) | \
 327                                         FTIM1_GPCM_TRAD(0x1f))
 328 #define CONFIG_SYS_CS3_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
 329                                         FTIM2_GPCM_TCH(0x0) | \
 330                                         FTIM2_GPCM_TWP(0x1f))
 331 #define CONFIG_SYS_CS3_FTIM3            0x0
 332
 333 /* NAND Flash on IFC */
 334 #define CONFIG_NAND_FSL_IFC
 335 #define CONFIG_SYS_NAND_MAX_ECCPOS      256
 336 #define CONFIG_SYS_NAND_MAX_OOBFREE     2
 337 #define CONFIG_SYS_NAND_BASE            0xff800000
 338 #ifdef CONFIG_PHYS_64BIT
 339 #define CONFIG_SYS_NAND_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_NAND_BASE)
 340 #else
 341 #define CONFIG_SYS_NAND_BASE_PHYS       CONFIG_SYS_NAND_BASE
 342 #endif
 343
 344 #define CONFIG_SYS_NAND_CSPR_EXT        (0xf)
 345 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 346                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
 347                                 | CSPR_MSEL_NAND        /* MSEL = NAND */ \
 348                                 | CSPR_V)
 349 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64 * 1024)
 350
 351 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 352                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 353                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 354                                 | CSOR_NAND_RAL_3       /* RAL = 2Byes */ \
 355                                 | CSOR_NAND_PGS_2K      /* Page Size = 2K */ \
 356                                 | CSOR_NAND_SPRZ_64/* Spare size = 64 */ \
 357                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
 358
 359 #define CONFIG_SYS_NAND_ONFI_DETECTION
 360
 361 /* ONFI NAND Flash mode0 Timing Params */
 362 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x07) | \
 363                                         FTIM0_NAND_TWP(0x18)   | \
 364                                         FTIM0_NAND_TWCHT(0x07) | \
 365                                         FTIM0_NAND_TWH(0x0a))
 366 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
 367                                         FTIM1_NAND_TWBE(0x39)  | \
 368                                         FTIM1_NAND_TRR(0x0e)   | \
 369                                         FTIM1_NAND_TRP(0x18))
 370 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x0f) | \
 371                                         FTIM2_NAND_TREH(0x0a) | \
 372                                         FTIM2_NAND_TWHRE(0x1e))
 373 #define CONFIG_SYS_NAND_FTIM3           0x0
 374
 375 #define CONFIG_SYS_NAND_DDR_LAW         11
 376
 377 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 378 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 379 #define CONFIG_MTD_NAND_VERIFY_WRITE
 380 #define CONFIG_CMD_NAND
 381
 382 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
 383
 384 #if defined(CONFIG_NAND)
 385 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
 386 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 387 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 388 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 389 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 390 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 391 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 392 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 393 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 394 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NOR0_CSPR
 395 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NOR_AMASK
 396 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NOR_CSOR
 397 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NOR_FTIM0
 398 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NOR_FTIM1
 399 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NOR_FTIM2
 400 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NOR_FTIM3
 401 #else
 402 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 403 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR
 404 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 405 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 406 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 407 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 408 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 409 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 410 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NAND_CSPR_EXT
 411 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NAND_CSPR
 412 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NAND_AMASK
 413 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NAND_CSOR
 414 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NAND_FTIM0
 415 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NAND_FTIM1
 416 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NAND_FTIM2
 417 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NAND_FTIM3
 418 #endif
 419 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR1_CSPR_EXT
 420 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR1_CSPR
 421 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 422 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 423 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 424 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 425 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 426 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 427
 428 #ifdef CONFIG_SPL_BUILD
 429 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
 430 #else
 431 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
 432 #endif
 433
 434 #if defined(CONFIG_RAMBOOT_PBL)
 435 #define CONFIG_SYS_RAMBOOT
 436 #endif
 437
 438 #define CONFIG_BOARD_EARLY_INIT_R
 439 #define CONFIG_MISC_INIT_R
 440
 441 #define CONFIG_HWCONFIG
 442
 443 /* define to use L1 as initial stack */
 444 #define CONFIG_L1_INIT_RAM
 445 #define CONFIG_SYS_INIT_RAM_LOCK
 446 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000      /* Initial L1 address */
 447 #ifdef CONFIG_PHYS_64BIT
 448 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH      0xf
 449 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW       0xfe0ec000
 450 /* The assembler doesn't like typecast */
 451 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 452         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 453           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 454 #else
 455 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS   0xfe0ec000 /* Initial L1 address */
 456 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0
 457 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS
 458 #endif
 459 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000
 460
 461 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 462                                         GENERATED_GBL_DATA_SIZE)
 463 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 464
 465 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 466 #define CONFIG_SYS_MALLOC_LEN           (4 * 1024 * 1024)
 467
 468 /* Serial Port - controlled on board with jumper J8
 469  * open - index 2
 470  * shorted - index 1
 471  */
 472 #define CONFIG_CONS_INDEX       1
 473 #define CONFIG_SYS_NS16550
 474 #define CONFIG_SYS_NS16550_SERIAL
 475 #define CONFIG_SYS_NS16550_REG_SIZE     1
 476 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 477
 478 #define CONFIG_SYS_BAUDRATE_TABLE       \
 479         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 480
 481 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 482 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 483 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 484 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 485 #define CONFIG_SERIAL_MULTI             /* Enable both serial ports */
 486 #ifndef CONFIG_SPL_BUILD
 487 #define CONFIG_SYS_CONSOLE_IS_IN_ENV    /* determine from environment */
 488 #endif
 489
 490
 491 /* Use the HUSH parser */
 492 #define CONFIG_SYS_HUSH_PARSER
 493 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 494
 495 /* pass open firmware flat tree */
 496 #define CONFIG_OF_LIBFDT
 497 #define CONFIG_OF_BOARD_SETUP
 498 #define CONFIG_OF_STDOUT_VIA_ALIAS
 499
 500 /* new uImage format support */
 501 #define CONFIG_FIT
 502 #define CONFIG_FIT_VERBOSE      /* enable fit_format_{error,warning}() */
 503
 504 /* I2C */
 505 #define CONFIG_SYS_I2C
 506 #define CONFIG_SYS_I2C_FSL              /* Use FSL common I2C driver */
 507 #define CONFIG_SYS_FSL_I2C_SPEED        400000  /* I2C speed in Hz */
 508 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 509 #define CONFIG_SYS_FSL_I2C2_SPEED       400000  /* I2C speed in Hz */
 510 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 511 #define CONFIG_SYS_FSL_I2C_OFFSET       0x118000
 512 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x119000
 513
 514 /*
 515  * RTC configuration
 516  */
 517 #define RTC
 518 #define CONFIG_RTC_DS3231               1
 519 #define CONFIG_SYS_I2C_RTC_ADDR         0x68
 520
 521 /*
 522  * RapidIO
 523  */
 524 #ifdef CONFIG_SYS_SRIO
 525 #ifdef CONFIG_SRIO1
 526 #define CONFIG_SYS_SRIO1_MEM_VIRT       0xa0000000
 527 #ifdef CONFIG_PHYS_64BIT
 528 #define CONFIG_SYS_SRIO1_MEM_PHYS       0xc20000000ull
 529 #else
 530 #define CONFIG_SYS_SRIO1_MEM_PHYS       0xa0000000
 531 #endif
 532 #define CONFIG_SYS_SRIO1_MEM_SIZE       0x10000000      /* 256M */
 533 #endif
 534
 535 #ifdef CONFIG_SRIO2
 536 #define CONFIG_SYS_SRIO2_MEM_VIRT       0xb0000000
 537 #ifdef CONFIG_PHYS_64BIT
 538 #define CONFIG_SYS_SRIO2_MEM_PHYS       0xc30000000ull
 539 #else
 540 #define CONFIG_SYS_SRIO2_MEM_PHYS       0xb0000000
 541 #endif
 542 #define CONFIG_SYS_SRIO2_MEM_SIZE       0x10000000      /* 256M */
 543 #endif
 544 #endif
 545
 546 /*
 547  * for slave u-boot IMAGE instored in master memory space,
 548  * PHYS must be aligned based on the SIZE
 549  */
 550 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef080000ull
 551 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff80000ull
 552 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x80000        /* 512K */
 553 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff80000ull
 554 /*
 555  * for slave UCODE and ENV instored in master memory space,
 556  * PHYS must be aligned based on the SIZE
 557  */
 558 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef040000ull
 559 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull
 560 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE 0x40000    /* 256K */
 561
 562 /* slave core release by master*/
 563 #define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4
 564 #define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */
 565
 566 /*
 567  * SRIO_PCIE_BOOT - SLAVE
 568  */
 569 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
 570 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000
 571 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \
 572                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR)
 573 #endif
 574
 575 /*
 576  * eSPI - Enhanced SPI
 577  */
 578 #define CONFIG_FSL_ESPI
 579 #define CONFIG_SPI_FLASH
 580 #define CONFIG_SPI_FLASH_SST
 581 #define CONFIG_CMD_SF
 582 #define CONFIG_SF_DEFAULT_SPEED         10000000
 583 #define CONFIG_SF_DEFAULT_MODE          0
 584
 585 /*
 586  * MAPLE
 587  */
 588 #ifdef CONFIG_PHYS_64BIT
 589 #define CONFIG_SYS_MAPLE_MEM_PHYS      0xFA0000000ull
 590 #else
 591 #define CONFIG_SYS_MAPLE_MEM_PHYS      0xA0000000
 592 #endif
 593
 594 /*
 595  * General PCI
 596  * Memory space is mapped 1-1, but I/O space must start from 0.
 597  */
 598
 599 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 600 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 601 #ifdef CONFIG_PHYS_64BIT
 602 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
 603 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 604 #else
 605 #define CONFIG_SYS_PCIE1_MEM_BUS        0x80000000
 606 #define CONFIG_SYS_PCIE1_MEM_PHYS       0x80000000
 607 #endif
 608 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x20000000      /* 512M */
 609 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 610 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 611 #ifdef CONFIG_PHYS_64BIT
 612 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 613 #else
 614 #define CONFIG_SYS_PCIE1_IO_PHYS        0xf8000000
 615 #endif
 616 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 617
 618 /* Qman/Bman */
 619 #ifndef CONFIG_NOBQFMAN
 620 #define CONFIG_SYS_DPAA_QBMAN           /* Support Q/Bman */
 621 #define CONFIG_SYS_BMAN_NUM_PORTALS     25
 622 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 623 #ifdef CONFIG_PHYS_64BIT
 624 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 625 #else
 626 #define CONFIG_SYS_BMAN_MEM_PHYS        CONFIG_SYS_BMAN_MEM_BASE
 627 #endif
 628 #define CONFIG_SYS_BMAN_MEM_SIZE        0x02000000
 629 #define CONFIG_SYS_QMAN_NUM_PORTALS     25
 630 #define CONFIG_SYS_QMAN_MEM_BASE        0xf6000000
 631 #ifdef CONFIG_PHYS_64BIT
 632 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff6000000ull
 633 #else
 634 #define CONFIG_SYS_QMAN_MEM_PHYS        CONFIG_SYS_QMAN_MEM_BASE
 635 #endif
 636 #define CONFIG_SYS_QMAN_MEM_SIZE        0x02000000
 637
 638 #define CONFIG_SYS_DPAA_FMAN
 639
 640 #define CONFIG_SYS_DPAA_RMAN
 641
 642 /* Default address of microcode for the Linux Fman driver */
 643 #if defined(CONFIG_SPIFLASH)
 644 /*
 645  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
 646  * env, so we got 0x110000.
 647  */
 648 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
 649 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000
 650 #elif defined(CONFIG_SDCARD)
 651 /*
 652  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 653  * about 545KB (1089 blocks), Env is stored after the image, and the env size is
 654  * 0x2000 (16 blocks), 8 + 1089 + 16 = 1113, enlarge it to 1130.
 655  */
 656 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
 657 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 1130)
 658 #elif defined(CONFIG_NAND)
 659 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
 660 #define CONFIG_SYS_FMAN_FW_ADDR (13 * CONFIG_SYS_NAND_BLOCK_SIZE)
 661 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 662 /*
 663  * Slave has no ucode locally, it can fetch this from remote. When implementing
 664  * in two corenet boards, slave's ucode could be stored in master's memory
 665  * space, the address can be mapped from slave TLB->slave LAW->
 666  * slave SRIO or PCIE outbound window->master inbound window->
 667  * master LAW->the ucode address in master's memory space.
 668  */
 669 #define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE
 670 #define CONFIG_SYS_FMAN_FW_ADDR 0xFFE00000
 671 #else
 672 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 673 #define CONFIG_SYS_FMAN_FW_ADDR         0xEFF00000
 674 #endif
 675 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 676 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 677 #endif /* CONFIG_NOBQFMAN */
 678
 679 #ifdef CONFIG_SYS_DPAA_FMAN
 680 #define CONFIG_FMAN_ENET
 681 #define CONFIG_PHYLIB_10G
 682 #define CONFIG_PHY_VITESSE
 683 #define CONFIG_PHY_TERANETICS
 684 #define SGMII_CARD_PORT1_PHY_ADDR 0x1C
 685 #define SGMII_CARD_PORT2_PHY_ADDR 0x10
 686 #define SGMII_CARD_PORT3_PHY_ADDR 0x1E
 687 #define SGMII_CARD_PORT4_PHY_ADDR 0x11
 688 #endif
 689
 690 #ifdef CONFIG_PCI
 691 #define CONFIG_PCI_INDIRECT_BRIDGE
 692 #define CONFIG_NET_MULTI
 693 #define CONFIG_PCI_PNP                  /* do pci plug-and-play */
 694 #define CONFIG_E1000
 695
 696 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 697 #define CONFIG_DOS_PARTITION
 698 #endif  /* CONFIG_PCI */
 699
 700 #ifdef CONFIG_FMAN_ENET
 701 #define CONFIG_SYS_FM1_DTSEC5_PHY_ADDR  0x10
 702 #define CONFIG_SYS_FM1_DTSEC6_PHY_ADDR  0x11
 703
 704 /*B4860 QDS AMC2PEX-2S default PHY_ADDR */
 705 #define CONFIG_SYS_FM1_10GEC1_PHY_ADDR 0x7       /*SLOT 1*/
 706 #define CONFIG_SYS_FM1_10GEC2_PHY_ADDR 0x6       /*SLOT 2*/
 707
 708
 709 #define CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR    0x1c
 710 #define CONFIG_SYS_FM1_DTSEC2_RISER_PHY_ADDR    0x1d
 711 #define CONFIG_SYS_FM1_DTSEC3_RISER_PHY_ADDR    0x1e
 712 #define CONFIG_SYS_FM1_DTSEC4_RISER_PHY_ADDR    0x1f
 713
 714 #define CONFIG_MII              /* MII PHY management */
 715 #define CONFIG_ETHPRIME         "FM1@DTSEC1"
 716 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
 717 #endif
 718
 719 /*
 720  * Environment
 721  */
 722 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 723 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 724
 725 /*
 726  * Command line configuration.
 727  */
 728 #include <config_cmd_default.h>
 729
 730 #define CONFIG_CMD_DATE
 731 #define CONFIG_CMD_DHCP
 732 #define CONFIG_CMD_EEPROM
 733 #define CONFIG_CMD_ELF
 734 #define CONFIG_CMD_ERRATA
 735 #define CONFIG_CMD_GREPENV
 736 #define CONFIG_CMD_IRQ
 737 #define CONFIG_CMD_I2C
 738 #define CONFIG_CMD_MII
 739 #define CONFIG_CMD_PING
 740 #define CONFIG_CMD_REGINFO
 741 #define CONFIG_CMD_SETEXPR
 742
 743 #ifdef CONFIG_PCI
 744 #define CONFIG_CMD_PCI
 745 #define CONFIG_CMD_NET
 746 #endif
 747
 748 /*
 749 * USB
 750 */
 751 #define CONFIG_HAS_FSL_DR_USB
 752
 753 #ifdef CONFIG_HAS_FSL_DR_USB
 754 #define CONFIG_USB_EHCI
 755
 756 #ifdef CONFIG_USB_EHCI
 757 #define CONFIG_CMD_USB
 758 #define CONFIG_USB_STORAGE
 759 #define CONFIG_USB_EHCI_FSL
 760 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 761 #define CONFIG_CMD_EXT2
 762 #endif
 763 #endif
 764
 765 /*
 766  * Miscellaneous configurable options
 767  */
 768 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 769 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
 770 #define CONFIG_AUTO_COMPLETE                    /* add autocompletion support */
 771 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 772 #ifdef CONFIG_CMD_KGDB
 773 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
 774 #else
 775 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 776 #endif
 777 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 778 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
 779 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
 780
 781 /*
 782  * For booting Linux, the board info and command line data
 783  * have to be in the first 64 MB of memory, since this is
 784  * the maximum mapped by the Linux kernel during initialization.
 785  */
 786 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial map for Linux*/
 787 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 788
 789 #ifdef CONFIG_CMD_KGDB
 790 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 791 #endif
 792
 793 /*
 794  * Environment Configuration
 795  */
 796 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 797 #define CONFIG_BOOTFILE         "uImage"
 798 #define CONFIG_UBOOTPATH        "u-boot.bin"    /* U-Boot image on TFTP server*/
 799
 800 /* default location for tftp and bootm */
 801 #define CONFIG_LOADADDR         1000000
 802
 803 #define CONFIG_BOOTDELAY        10      /* -1 disables auto-boot */
 804
 805 #define CONFIG_BAUDRATE 115200
 806
 807 #define __USB_PHY_TYPE  ulpi
 808
 809 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 810         "hwconfig=fsl_ddr:ctlr_intlv=null,"             \
 811         "bank_intlv=cs0_cs1;"                                   \
 812         "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
 813         "netdev=eth0\0"                                         \
 814         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"                     \
 815         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"                     \
 816         "tftpflash=tftpboot $loadaddr $uboot && "               \
 817         "protect off $ubootaddr +$filesize && "                 \
 818         "erase $ubootaddr +$filesize && "                       \
 819         "cp.b $loadaddr $ubootaddr $filesize && "               \
 820         "protect on $ubootaddr +$filesize && "                  \
 821         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 822         "consoledev=ttyS0\0"                                    \
 823         "ramdiskaddr=2000000\0"                                 \
 824         "ramdiskfile=b4860qds/ramdisk.uboot\0"                  \
 825         "fdtaddr=c00000\0"                                      \
 826         "fdtfile=b4860qds/b4860qds.dtb\0"                               \
 827         "bdev=sda3\0"                                           \
 828         "c=ffe\0"
 829
 830 /* For emulation this causes u-boot to jump to the start of the proof point
 831    app code automatically */
 832 #define CONFIG_PROOF_POINTS                     \
 833  "setenv bootargs root=/dev/$bdev rw "          \
 834  "console=$consoledev,$baudrate $othbootargs;"  \
 835  "cpu 1 release 0x29000000 - - -;"              \
 836  "cpu 2 release 0x29000000 - - -;"              \
 837  "cpu 3 release 0x29000000 - - -;"              \
 838  "cpu 4 release 0x29000000 - - -;"              \
 839  "cpu 5 release 0x29000000 - - -;"              \
 840  "cpu 6 release 0x29000000 - - -;"              \
 841  "cpu 7 release 0x29000000 - - -;"              \
 842  "go 0x29000000"
 843
 844 #define CONFIG_HVBOOT   \
 845  "setenv bootargs config-addr=0x60000000; "     \
 846  "bootm 0x01000000 - 0x00f00000"
 847
 848 #define CONFIG_ALU                              \
 849  "setenv bootargs root=/dev/$bdev rw "          \
 850  "console=$consoledev,$baudrate $othbootargs;"  \
 851  "cpu 1 release 0x01000000 - - -;"              \
 852  "cpu 2 release 0x01000000 - - -;"              \
 853  "cpu 3 release 0x01000000 - - -;"              \
 854  "cpu 4 release 0x01000000 - - -;"              \
 855  "cpu 5 release 0x01000000 - - -;"              \
 856  "cpu 6 release 0x01000000 - - -;"              \
 857  "cpu 7 release 0x01000000 - - -;"              \
 858  "go 0x01000000"
 859
 860 #define CONFIG_LINUX                            \
 861  "setenv bootargs root=/dev/ram rw "            \
 862  "console=$consoledev,$baudrate $othbootargs;"  \
 863  "setenv ramdiskaddr 0x02000000;"               \
 864  "setenv fdtaddr 0x00c00000;"                   \
 865  "setenv loadaddr 0x1000000;"                   \
 866  "bootm $loadaddr $ramdiskaddr $fdtaddr"
 867
 868 #define CONFIG_HDBOOT                                   \
 869         "setenv bootargs root=/dev/$bdev rw "           \
 870         "console=$consoledev,$baudrate $othbootargs;"   \
 871         "tftp $loadaddr $bootfile;"                     \
 872         "tftp $fdtaddr $fdtfile;"                       \
 873         "bootm $loadaddr - $fdtaddr"
 874
 875 #define CONFIG_NFSBOOTCOMMAND                   \
 876         "setenv bootargs root=/dev/nfs rw "     \
 877         "nfsroot=$serverip:$rootpath "          \
 878         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 879         "console=$consoledev,$baudrate $othbootargs;"   \
 880         "tftp $loadaddr $bootfile;"             \
 881         "tftp $fdtaddr $fdtfile;"               \
 882         "bootm $loadaddr - $fdtaddr"
 883
 884 #define CONFIG_RAMBOOTCOMMAND                           \
 885         "setenv bootargs root=/dev/ram rw "             \
 886         "console=$consoledev,$baudrate $othbootargs;"   \
 887         "tftp $ramdiskaddr $ramdiskfile;"               \
 888         "tftp $loadaddr $bootfile;"                     \
 889         "tftp $fdtaddr $fdtfile;"                       \
 890         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 891
 892 #define CONFIG_BOOTCOMMAND              CONFIG_LINUX
 893
 894 #include <asm/fsl_secure_boot.h>
 895
 896 #endif  /* __CONFIG_H */