include/configs/B4860QDS.h

   1 /*
   2  * Copyright 2011-2012 Freescale Semiconductor, Inc.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 #ifndef __CONFIG_H
   8 #define __CONFIG_H
   9
  10 /*
  11  * B4860 QDS board configuration file
  12  */
  13 #define CONFIG_B4860QDS
  14 #define CONFIG_PHYS_64BIT
  15
  16 #ifdef CONFIG_RAMBOOT_PBL
  17 #define CONFIG_RAMBOOT_TEXT_BASE        CONFIG_SYS_TEXT_BASE
  18 #define CONFIG_RESET_VECTOR_ADDRESS     0xfffffffc
  19 #define CONFIG_SYS_FSL_PBL_PBI  board/freescale/b4860qds/b4_pbi.cfg
  20 #define CONFIG_SYS_FSL_PBL_RCW  board/freescale/b4860qds/b4_rcw.cfg
  21 #endif
  22
  23 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
  24 /* Set 1M boot space */
  25 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000)
  26 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \
  27                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR)
  28 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
  29 #define CONFIG_SYS_NO_FLASH
  30 #endif
  31
  32 /* High Level Configuration Options */
  33 #define CONFIG_BOOKE
  34 #define CONFIG_E500                     /* BOOKE e500 family */
  35 #define CONFIG_E500MC                   /* BOOKE e500mc family */
  36 #define CONFIG_SYS_BOOK3E_HV            /* Category E.HV supported */
  37 #define CONFIG_MP                       /* support multiple processors */
  38
  39 #ifndef CONFIG_SYS_TEXT_BASE
  40 #define CONFIG_SYS_TEXT_BASE    0xeff40000
  41 #endif
  42
  43 #ifndef CONFIG_RESET_VECTOR_ADDRESS
  44 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
  45 #endif
  46
  47 #define CONFIG_SYS_FSL_CPC              /* Corenet Platform Cache */
  48 #define CONFIG_SYS_NUM_CPC              CONFIG_NUM_DDR_CONTROLLERS
  49 #define CONFIG_FSL_IFC                  /* Enable IFC Support */
  50 #define CONFIG_PCI                      /* Enable PCI/PCIE */
  51 #define CONFIG_PCIE1                    /* PCIE controler 1 */
  52 #define CONFIG_FSL_PCI_INIT             /* Use common FSL init code */
  53 #define CONFIG_SYS_PCI_64BIT            /* enable 64-bit PCI resources */
  54
  55 #ifndef CONFIG_PPC_B4420
  56 #define CONFIG_SYS_SRIO
  57 #define CONFIG_SRIO1                    /* SRIO port 1 */
  58 #define CONFIG_SRIO2                    /* SRIO port 2 */
  59 #define CONFIG_SRIO_PCIE_BOOT_MASTER
  60 #endif
  61
  62 #define CONFIG_FSL_LAW                  /* Use common FSL init code */
  63
  64 /* I2C bus multiplexer */
  65 #define I2C_MUX_PCA_ADDR                0x77
  66
  67 /* VSC Crossbar switches */
  68 #define CONFIG_VSC_CROSSBAR
  69 #define I2C_CH_DEFAULT                  0x8
  70 #define I2C_CH_VSC3316                  0xc
  71 #define I2C_CH_VSC3308                  0xd
  72
  73 #define VSC3316_TX_ADDRESS              0x70
  74 #define VSC3316_RX_ADDRESS              0x71
  75 #define VSC3308_TX_ADDRESS              0x02
  76 #define VSC3308_RX_ADDRESS              0x03
  77
  78 /* IDT clock synthesizers */
  79 #define CONFIG_IDT8T49N222A
  80 #define I2C_CH_IDT                     0x9
  81
  82 #define IDT_SERDES1_ADDRESS            0x6E
  83 #define IDT_SERDES2_ADDRESS            0x6C
  84
  85 #define CONFIG_ENV_OVERWRITE
  86
  87 #ifdef CONFIG_SYS_NO_FLASH
  88 #if !defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) && !defined(CONFIG_RAMBOOT_PBL)
  89 #define CONFIG_ENV_IS_NOWHERE
  90 #endif
  91 #else
  92 #define CONFIG_FLASH_CFI_DRIVER
  93 #define CONFIG_SYS_FLASH_CFI
  94 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
  95 #endif
  96
  97 #if defined(CONFIG_SPIFLASH)
  98 #define CONFIG_SYS_EXTRA_ENV_RELOC
  99 #define CONFIG_ENV_IS_IN_SPI_FLASH
 100 #define CONFIG_ENV_SPI_BUS              0
 101 #define CONFIG_ENV_SPI_CS               0
 102 #define CONFIG_ENV_SPI_MAX_HZ           10000000
 103 #define CONFIG_ENV_SPI_MODE             0
 104 #define CONFIG_ENV_SIZE                 0x2000          /* 8KB */
 105 #define CONFIG_ENV_OFFSET               0x100000        /* 1MB */
 106 #define CONFIG_ENV_SECT_SIZE            0x10000
 107 #elif defined(CONFIG_SDCARD)
 108 #define CONFIG_SYS_EXTRA_ENV_RELOC
 109 #define CONFIG_ENV_IS_IN_MMC
 110 #define CONFIG_SYS_MMC_ENV_DEV          0
 111 #define CONFIG_ENV_SIZE                 0x2000
 112 #define CONFIG_ENV_OFFSET               (512 * 1097)
 113 #elif defined(CONFIG_NAND)
 114 #define CONFIG_SYS_EXTRA_ENV_RELOC
 115 #define CONFIG_ENV_IS_IN_NAND
 116 #define CONFIG_ENV_SIZE                 CONFIG_SYS_NAND_BLOCK_SIZE
 117 #define CONFIG_ENV_OFFSET               (7 * CONFIG_SYS_NAND_BLOCK_SIZE)
 118 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 119 #define CONFIG_ENV_IS_IN_REMOTE
 120 #define CONFIG_ENV_ADDR         0xffe20000
 121 #define CONFIG_ENV_SIZE         0x2000
 122 #elif defined(CONFIG_ENV_IS_NOWHERE)
 123 #define CONFIG_ENV_SIZE         0x2000
 124 #else
 125 #define CONFIG_ENV_IS_IN_FLASH
 126 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 127 #define CONFIG_ENV_SIZE         0x2000
 128 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 129 #endif
 130
 131 #ifndef __ASSEMBLY__
 132 unsigned long get_board_sys_clk(void);
 133 unsigned long get_board_ddr_clk(void);
 134 #endif
 135 #define CONFIG_SYS_CLK_FREQ     get_board_sys_clk() /* sysclk for MPC85xx */
 136 #define CONFIG_DDR_CLK_FREQ     get_board_ddr_clk()
 137
 138 /*
 139  * These can be toggled for performance analysis, otherwise use default.
 140  */
 141 #define CONFIG_SYS_CACHE_STASHING
 142 #define CONFIG_BTB                      /* toggle branch predition */
 143 #define CONFIG_DDR_ECC
 144 #ifdef CONFIG_DDR_ECC
 145 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 146 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
 147 #endif
 148
 149 #define CONFIG_ENABLE_36BIT_PHYS
 150
 151 #ifdef CONFIG_PHYS_64BIT
 152 #define CONFIG_ADDR_MAP
 153 #define CONFIG_SYS_NUM_ADDR_MAP         64      /* number of TLB1 entries */
 154 #endif
 155
 156 #if 0
 157 #define CONFIG_POST CONFIG_SYS_POST_MEMORY      /* test POST memory test */
 158 #endif
 159 #define CONFIG_SYS_MEMTEST_START        0x00200000      /* memtest works on */
 160 #define CONFIG_SYS_MEMTEST_END          0x00400000
 161 #define CONFIG_SYS_ALT_MEMTEST
 162 #define CONFIG_PANIC_HANG       /* do not reset board on panic */
 163
 164 /*
 165  *  Config the L3 Cache as L3 SRAM
 166  */
 167 #define CONFIG_SYS_INIT_L3_ADDR         CONFIG_RAMBOOT_TEXT_BASE
 168
 169 #ifdef CONFIG_PHYS_64BIT
 170 #define CONFIG_SYS_DCSRBAR              0xf0000000
 171 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
 172 #endif
 173
 174 /* EEPROM */
 175 #define CONFIG_SYS_I2C_EEPROM_NXID
 176 #define CONFIG_SYS_EEPROM_BUS_NUM       0
 177 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x57
 178 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
 179 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
 180 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
 181
 182 /*
 183  * DDR Setup
 184  */
 185 #define CONFIG_VERY_BIG_RAM
 186 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 187 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 188
 189 /* CONFIG_NUM_DDR_CONTROLLERS is defined in include/asm/config_mpc85xx.h */
 190 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 191 #define CONFIG_CHIP_SELECTS_PER_CTRL    (4 * CONFIG_DIMM_SLOTS_PER_CTLR)
 192
 193 #define CONFIG_DDR_SPD
 194 #define CONFIG_SYS_DDR_RAW_TIMING
 195 #define CONFIG_SYS_FSL_DDR3
 196 #define CONFIG_FSL_DDR_INTERACTIVE
 197
 198 #define CONFIG_SYS_SPD_BUS_NUM  0
 199 #define SPD_EEPROM_ADDRESS1     0x51
 200 #define SPD_EEPROM_ADDRESS2     0x53
 201
 202 #define SPD_EEPROM_ADDRESS      SPD_EEPROM_ADDRESS1
 203 #define CONFIG_SYS_SDRAM_SIZE   2048    /* for fixed parameter use */
 204
 205 /*
 206  * IFC Definitions
 207  */
 208 #define CONFIG_SYS_FLASH_BASE   0xe0000000
 209 #ifdef CONFIG_PHYS_64BIT
 210 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
 211 #else
 212 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
 213 #endif
 214
 215 #define CONFIG_SYS_NOR0_CSPR_EXT        (0xf)
 216 #define CONFIG_SYS_NOR0_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \
 217                                 + 0x8000000) | \
 218                                 CSPR_PORT_SIZE_16 | \
 219                                 CSPR_MSEL_NOR | \
 220                                 CSPR_V)
 221 #define CONFIG_SYS_NOR1_CSPR_EXT        (0xf)
 222 #define CONFIG_SYS_NOR1_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
 223                                 CSPR_PORT_SIZE_16 | \
 224                                 CSPR_MSEL_NOR | \
 225                                 CSPR_V)
 226 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(128 * 1024 * 1024)
 227 /* NOR Flash Timing Params */
 228 #define CONFIG_SYS_NOR_CSOR     CSOR_NOR_ADM_SHIFT(4)
 229 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x01) | \
 230                                 FTIM0_NOR_TEADC(0x04) | \
 231                                 FTIM0_NOR_TEAHC(0x20))
 232 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
 233                                 FTIM1_NOR_TRAD_NOR(0x1A) |\
 234                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
 235 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x01) | \
 236                                 FTIM2_NOR_TCH(0x0E) | \
 237                                 FTIM2_NOR_TWPH(0x0E) | \
 238                                 FTIM2_NOR_TWP(0x1c))
 239 #define CONFIG_SYS_NOR_FTIM3    0x0
 240
 241 #define CONFIG_SYS_FLASH_QUIET_TEST
 242 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 243
 244 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* number of banks */
 245 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 246 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 247 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 248
 249 #define CONFIG_SYS_FLASH_EMPTY_INFO
 250 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS \
 251                                         + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS}
 252
 253 #define CONFIG_FSL_QIXIS        /* use common QIXIS code */
 254 #define CONFIG_FSL_QIXIS_V2
 255 #define QIXIS_BASE              0xffdf0000
 256 #ifdef CONFIG_PHYS_64BIT
 257 #define QIXIS_BASE_PHYS         (0xf00000000ull | QIXIS_BASE)
 258 #else
 259 #define QIXIS_BASE_PHYS         QIXIS_BASE
 260 #endif
 261 #define QIXIS_LBMAP_SWITCH              0x01
 262 #define QIXIS_LBMAP_MASK                0x0f
 263 #define QIXIS_LBMAP_SHIFT               0
 264 #define QIXIS_LBMAP_DFLTBANK            0x00
 265 #define QIXIS_LBMAP_ALTBANK             0x02
 266 #define QIXIS_RST_CTL_RESET             0x31
 267 #define QIXIS_RCFG_CTL_RECONFIG_IDLE    0x20
 268 #define QIXIS_RCFG_CTL_RECONFIG_START   0x21
 269 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE   0x08
 270
 271 #define CONFIG_SYS_CSPR3_EXT    (0xf)
 272 #define CONFIG_SYS_CSPR3        (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \
 273                                 | CSPR_PORT_SIZE_8 \
 274                                 | CSPR_MSEL_GPCM \
 275                                 | CSPR_V)
 276 #define CONFIG_SYS_AMASK3       IFC_AMASK(4 * 1024)
 277 #define CONFIG_SYS_CSOR3        0x0
 278 /* QIXIS Timing parameters for IFC CS3 */
 279 #define CONFIG_SYS_CS3_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 280                                         FTIM0_GPCM_TEADC(0x0e) | \
 281                                         FTIM0_GPCM_TEAHC(0x0e))
 282 #define CONFIG_SYS_CS3_FTIM1            (FTIM1_GPCM_TACO(0x0e) | \
 283                                         FTIM1_GPCM_TRAD(0x1f))
 284 #define CONFIG_SYS_CS3_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
 285                                         FTIM2_GPCM_TCH(0x0) | \
 286                                         FTIM2_GPCM_TWP(0x1f))
 287 #define CONFIG_SYS_CS3_FTIM3            0x0
 288
 289 /* NAND Flash on IFC */
 290 #define CONFIG_NAND_FSL_IFC
 291 #define CONFIG_SYS_NAND_MAX_ECCPOS      256
 292 #define CONFIG_SYS_NAND_MAX_OOBFREE     2
 293 #define CONFIG_SYS_NAND_BASE            0xff800000
 294 #ifdef CONFIG_PHYS_64BIT
 295 #define CONFIG_SYS_NAND_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_NAND_BASE)
 296 #else
 297 #define CONFIG_SYS_NAND_BASE_PHYS       CONFIG_SYS_NAND_BASE
 298 #endif
 299
 300 #define CONFIG_SYS_NAND_CSPR_EXT        (0xf)
 301 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 302                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
 303                                 | CSPR_MSEL_NAND        /* MSEL = NAND */ \
 304                                 | CSPR_V)
 305 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64 * 1024)
 306
 307 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 308                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 309                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 310                                 | CSOR_NAND_RAL_3       /* RAL = 2Byes */ \
 311                                 | CSOR_NAND_PGS_2K      /* Page Size = 2K */ \
 312                                 | CSOR_NAND_SPRZ_64/* Spare size = 64 */ \
 313                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
 314
 315 #define CONFIG_SYS_NAND_ONFI_DETECTION
 316
 317 /* ONFI NAND Flash mode0 Timing Params */
 318 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x07) | \
 319                                         FTIM0_NAND_TWP(0x18)   | \
 320                                         FTIM0_NAND_TWCHT(0x07) | \
 321                                         FTIM0_NAND_TWH(0x0a))
 322 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
 323                                         FTIM1_NAND_TWBE(0x39)  | \
 324                                         FTIM1_NAND_TRR(0x0e)   | \
 325                                         FTIM1_NAND_TRP(0x18))
 326 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x0f) | \
 327                                         FTIM2_NAND_TREH(0x0a) | \
 328                                         FTIM2_NAND_TWHRE(0x1e))
 329 #define CONFIG_SYS_NAND_FTIM3           0x0
 330
 331 #define CONFIG_SYS_NAND_DDR_LAW         11
 332
 333 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 334 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 335 #define CONFIG_MTD_NAND_VERIFY_WRITE
 336 #define CONFIG_CMD_NAND
 337
 338 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
 339
 340 #if defined(CONFIG_NAND)
 341 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
 342 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 343 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 344 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 345 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 346 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 347 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 348 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 349 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 350 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NOR0_CSPR
 351 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NOR_AMASK
 352 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NOR_CSOR
 353 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NOR_FTIM0
 354 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NOR_FTIM1
 355 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NOR_FTIM2
 356 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NOR_FTIM3
 357 #else
 358 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 359 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR
 360 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 361 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 362 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 363 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 364 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 365 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 366 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NAND_CSPR_EXT
 367 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NAND_CSPR
 368 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NAND_AMASK
 369 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NAND_CSOR
 370 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NAND_FTIM0
 371 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NAND_FTIM1
 372 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NAND_FTIM2
 373 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NAND_FTIM3
 374 #endif
 375 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR1_CSPR_EXT
 376 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR1_CSPR
 377 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 378 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 379 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 380 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 381 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 382 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 383
 384 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_TEXT_BASE
 385
 386 #if defined(CONFIG_RAMBOOT_PBL)
 387 #define CONFIG_SYS_RAMBOOT
 388 #endif
 389
 390 #define CONFIG_BOARD_EARLY_INIT_R
 391 #define CONFIG_MISC_INIT_R
 392
 393 #define CONFIG_HWCONFIG
 394
 395 /* define to use L1 as initial stack */
 396 #define CONFIG_L1_INIT_RAM
 397 #define CONFIG_SYS_INIT_RAM_LOCK
 398 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000      /* Initial L1 address */
 399 #ifdef CONFIG_PHYS_64BIT
 400 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH      0xf
 401 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW       0xfe0ec000
 402 /* The assembler doesn't like typecast */
 403 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 404         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 405           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 406 #else
 407 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS   0xfe0ec000 /* Initial L1 address */
 408 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0
 409 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS
 410 #endif
 411 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000
 412
 413 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 414                                         GENERATED_GBL_DATA_SIZE)
 415 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 416
 417 #define CONFIG_SYS_MONITOR_LEN          (512 * 1024)
 418 #define CONFIG_SYS_MALLOC_LEN           (4 * 1024 * 1024)
 419
 420 /* Serial Port - controlled on board with jumper J8
 421  * open - index 2
 422  * shorted - index 1
 423  */
 424 #define CONFIG_CONS_INDEX       1
 425 #define CONFIG_SYS_NS16550
 426 #define CONFIG_SYS_NS16550_SERIAL
 427 #define CONFIG_SYS_NS16550_REG_SIZE     1
 428 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 429
 430 #define CONFIG_SYS_BAUDRATE_TABLE       \
 431         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 432
 433 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 434 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 435 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 436 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 437 #define CONFIG_SERIAL_MULTI             /* Enable both serial ports */
 438 #define CONFIG_SYS_CONSOLE_IS_IN_ENV    /* determine from environment */
 439
 440
 441 /* Use the HUSH parser */
 442 #define CONFIG_SYS_HUSH_PARSER
 443 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 444
 445 /* pass open firmware flat tree */
 446 #define CONFIG_OF_LIBFDT
 447 #define CONFIG_OF_BOARD_SETUP
 448 #define CONFIG_OF_STDOUT_VIA_ALIAS
 449
 450 /* new uImage format support */
 451 #define CONFIG_FIT
 452 #define CONFIG_FIT_VERBOSE      /* enable fit_format_{error,warning}() */
 453
 454 /* I2C */
 455 #define CONFIG_SYS_I2C
 456 #define CONFIG_SYS_I2C_FSL              /* Use FSL common I2C driver */
 457 #define CONFIG_SYS_FSL_I2C_SPEED        400000  /* I2C speed in Hz */
 458 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 459 #define CONFIG_SYS_FSL_I2C2_SPEED       400000  /* I2C speed in Hz */
 460 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 461 #define CONFIG_SYS_FSL_I2C_OFFSET       0x118000
 462 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x119000
 463
 464 /*
 465  * RTC configuration
 466  */
 467 #define RTC
 468 #define CONFIG_RTC_DS3231               1
 469 #define CONFIG_SYS_I2C_RTC_ADDR         0x68
 470
 471 /*
 472  * RapidIO
 473  */
 474 #ifdef CONFIG_SYS_SRIO
 475 #ifdef CONFIG_SRIO1
 476 #define CONFIG_SYS_SRIO1_MEM_VIRT       0xa0000000
 477 #ifdef CONFIG_PHYS_64BIT
 478 #define CONFIG_SYS_SRIO1_MEM_PHYS       0xc20000000ull
 479 #else
 480 #define CONFIG_SYS_SRIO1_MEM_PHYS       0xa0000000
 481 #endif
 482 #define CONFIG_SYS_SRIO1_MEM_SIZE       0x10000000      /* 256M */
 483 #endif
 484
 485 #ifdef CONFIG_SRIO2
 486 #define CONFIG_SYS_SRIO2_MEM_VIRT       0xb0000000
 487 #ifdef CONFIG_PHYS_64BIT
 488 #define CONFIG_SYS_SRIO2_MEM_PHYS       0xc30000000ull
 489 #else
 490 #define CONFIG_SYS_SRIO2_MEM_PHYS       0xb0000000
 491 #endif
 492 #define CONFIG_SYS_SRIO2_MEM_SIZE       0x10000000      /* 256M */
 493 #endif
 494 #endif
 495
 496 /*
 497  * for slave u-boot IMAGE instored in master memory space,
 498  * PHYS must be aligned based on the SIZE
 499  */
 500 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef080000ull
 501 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff80000ull
 502 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x80000        /* 512K */
 503 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff80000ull
 504 /*
 505  * for slave UCODE and ENV instored in master memory space,
 506  * PHYS must be aligned based on the SIZE
 507  */
 508 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef040000ull
 509 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull
 510 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE 0x40000    /* 256K */
 511
 512 /* slave core release by master*/
 513 #define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4
 514 #define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */
 515
 516 /*
 517  * SRIO_PCIE_BOOT - SLAVE
 518  */
 519 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
 520 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000
 521 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \
 522                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR)
 523 #endif
 524
 525 /*
 526  * eSPI - Enhanced SPI
 527  */
 528 #define CONFIG_FSL_ESPI
 529 #define CONFIG_SPI_FLASH
 530 #define CONFIG_SPI_FLASH_SST
 531 #define CONFIG_CMD_SF
 532 #define CONFIG_SF_DEFAULT_SPEED         10000000
 533 #define CONFIG_SF_DEFAULT_MODE          0
 534
 535 /*
 536  * MAPLE
 537  */
 538 #ifdef CONFIG_PHYS_64BIT
 539 #define CONFIG_SYS_MAPLE_MEM_PHYS      0xFA0000000ull
 540 #else
 541 #define CONFIG_SYS_MAPLE_MEM_PHYS      0xA0000000
 542 #endif
 543
 544 /*
 545  * General PCI
 546  * Memory space is mapped 1-1, but I/O space must start from 0.
 547  */
 548
 549 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 550 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 551 #ifdef CONFIG_PHYS_64BIT
 552 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
 553 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 554 #else
 555 #define CONFIG_SYS_PCIE1_MEM_BUS        0x80000000
 556 #define CONFIG_SYS_PCIE1_MEM_PHYS       0x80000000
 557 #endif
 558 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x20000000      /* 512M */
 559 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 560 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 561 #ifdef CONFIG_PHYS_64BIT
 562 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 563 #else
 564 #define CONFIG_SYS_PCIE1_IO_PHYS        0xf8000000
 565 #endif
 566 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 567
 568 /* Qman/Bman */
 569 #ifndef CONFIG_NOBQFMAN
 570 #define CONFIG_SYS_DPAA_QBMAN           /* Support Q/Bman */
 571 #define CONFIG_SYS_BMAN_NUM_PORTALS     25
 572 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 573 #ifdef CONFIG_PHYS_64BIT
 574 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 575 #else
 576 #define CONFIG_SYS_BMAN_MEM_PHYS        CONFIG_SYS_BMAN_MEM_BASE
 577 #endif
 578 #define CONFIG_SYS_BMAN_MEM_SIZE        0x02000000
 579 #define CONFIG_SYS_QMAN_NUM_PORTALS     25
 580 #define CONFIG_SYS_QMAN_MEM_BASE        0xf6000000
 581 #ifdef CONFIG_PHYS_64BIT
 582 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff6000000ull
 583 #else
 584 #define CONFIG_SYS_QMAN_MEM_PHYS        CONFIG_SYS_QMAN_MEM_BASE
 585 #endif
 586 #define CONFIG_SYS_QMAN_MEM_SIZE        0x02000000
 587
 588 #define CONFIG_SYS_DPAA_FMAN
 589
 590 #define CONFIG_SYS_DPAA_RMAN
 591
 592 /* Default address of microcode for the Linux Fman driver */
 593 #if defined(CONFIG_SPIFLASH)
 594 /*
 595  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
 596  * env, so we got 0x110000.
 597  */
 598 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
 599 #define CONFIG_SYS_QE_FMAN_FW_ADDR      0x110000
 600 #elif defined(CONFIG_SDCARD)
 601 /*
 602  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 603  * about 545KB (1089 blocks), Env is stored after the image, and the env size is
 604  * 0x2000 (16 blocks), 8 + 1089 + 16 = 1113, enlarge it to 1130.
 605  */
 606 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
 607 #define CONFIG_SYS_QE_FMAN_FW_ADDR      (512 * 1130)
 608 #elif defined(CONFIG_NAND)
 609 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
 610 #define CONFIG_SYS_QE_FMAN_FW_ADDR      (8 * CONFIG_SYS_NAND_BLOCK_SIZE)
 611 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 612 /*
 613  * Slave has no ucode locally, it can fetch this from remote. When implementing
 614  * in two corenet boards, slave's ucode could be stored in master's memory
 615  * space, the address can be mapped from slave TLB->slave LAW->
 616  * slave SRIO or PCIE outbound window->master inbound window->
 617  * master LAW->the ucode address in master's memory space.
 618  */
 619 #define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE
 620 #define CONFIG_SYS_QE_FMAN_FW_ADDR      0xFFE00000
 621 #else
 622 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 623 #define CONFIG_SYS_QE_FMAN_FW_ADDR              0xEFF00000
 624 #endif
 625 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 626 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 627 #endif /* CONFIG_NOBQFMAN */
 628
 629 #ifdef CONFIG_SYS_DPAA_FMAN
 630 #define CONFIG_FMAN_ENET
 631 #define CONFIG_PHYLIB_10G
 632 #define CONFIG_PHY_VITESSE
 633 #define CONFIG_PHY_TERANETICS
 634 #define SGMII_CARD_PORT1_PHY_ADDR 0x1C
 635 #define SGMII_CARD_PORT2_PHY_ADDR 0x10
 636 #define SGMII_CARD_PORT3_PHY_ADDR 0x1E
 637 #define SGMII_CARD_PORT4_PHY_ADDR 0x11
 638 #endif
 639
 640 #ifdef CONFIG_PCI
 641 #define CONFIG_PCI_INDIRECT_BRIDGE
 642 #define CONFIG_NET_MULTI
 643 #define CONFIG_PCI_PNP                  /* do pci plug-and-play */
 644 #define CONFIG_E1000
 645
 646 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 647 #define CONFIG_DOS_PARTITION
 648 #endif  /* CONFIG_PCI */
 649
 650 #ifdef CONFIG_FMAN_ENET
 651 #define CONFIG_SYS_FM1_DTSEC5_PHY_ADDR  0x10
 652 #define CONFIG_SYS_FM1_DTSEC6_PHY_ADDR  0x11
 653
 654 /*B4860 QDS AMC2PEX-2S default PHY_ADDR */
 655 #define CONFIG_SYS_FM1_10GEC1_PHY_ADDR 0x7       /*SLOT 1*/
 656 #define CONFIG_SYS_FM1_10GEC2_PHY_ADDR 0x6       /*SLOT 2*/
 657
 658
 659 #define CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR    0x1c
 660 #define CONFIG_SYS_FM1_DTSEC2_RISER_PHY_ADDR    0x1d
 661 #define CONFIG_SYS_FM1_DTSEC3_RISER_PHY_ADDR    0x1e
 662 #define CONFIG_SYS_FM1_DTSEC4_RISER_PHY_ADDR    0x1f
 663
 664 #define CONFIG_MII              /* MII PHY management */
 665 #define CONFIG_ETHPRIME         "FM1@DTSEC1"
 666 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
 667 #endif
 668
 669 /*
 670  * Environment
 671  */
 672 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 673 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 674
 675 /*
 676  * Command line configuration.
 677  */
 678 #include <config_cmd_default.h>
 679
 680 #define CONFIG_CMD_DATE
 681 #define CONFIG_CMD_DHCP
 682 #define CONFIG_CMD_EEPROM
 683 #define CONFIG_CMD_ELF
 684 #define CONFIG_CMD_ERRATA
 685 #define CONFIG_CMD_GREPENV
 686 #define CONFIG_CMD_IRQ
 687 #define CONFIG_CMD_I2C
 688 #define CONFIG_CMD_MII
 689 #define CONFIG_CMD_PING
 690 #define CONFIG_CMD_REGINFO
 691 #define CONFIG_CMD_SETEXPR
 692
 693 #ifdef CONFIG_PCI
 694 #define CONFIG_CMD_PCI
 695 #define CONFIG_CMD_NET
 696 #endif
 697
 698 /*
 699 * USB
 700 */
 701 #define CONFIG_HAS_FSL_DR_USB
 702
 703 #ifdef CONFIG_HAS_FSL_DR_USB
 704 #define CONFIG_USB_EHCI
 705
 706 #ifdef CONFIG_USB_EHCI
 707 #define CONFIG_CMD_USB
 708 #define CONFIG_USB_STORAGE
 709 #define CONFIG_USB_EHCI_FSL
 710 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 711 #define CONFIG_CMD_EXT2
 712 #endif
 713 #endif
 714
 715 /*
 716  * Miscellaneous configurable options
 717  */
 718 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 719 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
 720 #define CONFIG_AUTO_COMPLETE                    /* add autocompletion support */
 721 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 722 #ifdef CONFIG_CMD_KGDB
 723 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
 724 #else
 725 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 726 #endif
 727 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 728 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
 729 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
 730
 731 /*
 732  * For booting Linux, the board info and command line data
 733  * have to be in the first 64 MB of memory, since this is
 734  * the maximum mapped by the Linux kernel during initialization.
 735  */
 736 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial map for Linux*/
 737 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 738
 739 #ifdef CONFIG_CMD_KGDB
 740 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 741 #endif
 742
 743 /*
 744  * Environment Configuration
 745  */
 746 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 747 #define CONFIG_BOOTFILE         "uImage"
 748 #define CONFIG_UBOOTPATH        "u-boot.bin"    /* U-Boot image on TFTP server*/
 749
 750 /* default location for tftp and bootm */
 751 #define CONFIG_LOADADDR         1000000
 752
 753 #define CONFIG_BOOTDELAY        10      /* -1 disables auto-boot */
 754
 755 #define CONFIG_BAUDRATE 115200
 756
 757 #define __USB_PHY_TYPE  ulpi
 758
 759 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 760         "hwconfig=fsl_ddr:ctlr_intlv=null,"             \
 761         "bank_intlv=cs0_cs1;"                                   \
 762         "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
 763         "netdev=eth0\0"                                         \
 764         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"                     \
 765         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"                     \
 766         "tftpflash=tftpboot $loadaddr $uboot && "               \
 767         "protect off $ubootaddr +$filesize && "                 \
 768         "erase $ubootaddr +$filesize && "                       \
 769         "cp.b $loadaddr $ubootaddr $filesize && "               \
 770         "protect on $ubootaddr +$filesize && "                  \
 771         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 772         "consoledev=ttyS0\0"                                    \
 773         "ramdiskaddr=2000000\0"                                 \
 774         "ramdiskfile=b4860qds/ramdisk.uboot\0"                  \
 775         "fdtaddr=c00000\0"                                      \
 776         "fdtfile=b4860qds/b4860qds.dtb\0"                               \
 777         "bdev=sda3\0"                                           \
 778         "c=ffe\0"
 779
 780 /* For emulation this causes u-boot to jump to the start of the proof point
 781    app code automatically */
 782 #define CONFIG_PROOF_POINTS                     \
 783  "setenv bootargs root=/dev/$bdev rw "          \
 784  "console=$consoledev,$baudrate $othbootargs;"  \
 785  "cpu 1 release 0x29000000 - - -;"              \
 786  "cpu 2 release 0x29000000 - - -;"              \
 787  "cpu 3 release 0x29000000 - - -;"              \
 788  "cpu 4 release 0x29000000 - - -;"              \
 789  "cpu 5 release 0x29000000 - - -;"              \
 790  "cpu 6 release 0x29000000 - - -;"              \
 791  "cpu 7 release 0x29000000 - - -;"              \
 792  "go 0x29000000"
 793
 794 #define CONFIG_HVBOOT   \
 795  "setenv bootargs config-addr=0x60000000; "     \
 796  "bootm 0x01000000 - 0x00f00000"
 797
 798 #define CONFIG_ALU                              \
 799  "setenv bootargs root=/dev/$bdev rw "          \
 800  "console=$consoledev,$baudrate $othbootargs;"  \
 801  "cpu 1 release 0x01000000 - - -;"              \
 802  "cpu 2 release 0x01000000 - - -;"              \
 803  "cpu 3 release 0x01000000 - - -;"              \
 804  "cpu 4 release 0x01000000 - - -;"              \
 805  "cpu 5 release 0x01000000 - - -;"              \
 806  "cpu 6 release 0x01000000 - - -;"              \
 807  "cpu 7 release 0x01000000 - - -;"              \
 808  "go 0x01000000"
 809
 810 #define CONFIG_LINUX                            \
 811  "setenv bootargs root=/dev/ram rw "            \
 812  "console=$consoledev,$baudrate $othbootargs;"  \
 813  "setenv ramdiskaddr 0x02000000;"               \
 814  "setenv fdtaddr 0x00c00000;"                   \
 815  "setenv loadaddr 0x1000000;"                   \
 816  "bootm $loadaddr $ramdiskaddr $fdtaddr"
 817
 818 #define CONFIG_HDBOOT                                   \
 819         "setenv bootargs root=/dev/$bdev rw "           \
 820         "console=$consoledev,$baudrate $othbootargs;"   \
 821         "tftp $loadaddr $bootfile;"                     \
 822         "tftp $fdtaddr $fdtfile;"                       \
 823         "bootm $loadaddr - $fdtaddr"
 824
 825 #define CONFIG_NFSBOOTCOMMAND                   \
 826         "setenv bootargs root=/dev/nfs rw "     \
 827         "nfsroot=$serverip:$rootpath "          \
 828         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 829         "console=$consoledev,$baudrate $othbootargs;"   \
 830         "tftp $loadaddr $bootfile;"             \
 831         "tftp $fdtaddr $fdtfile;"               \
 832         "bootm $loadaddr - $fdtaddr"
 833
 834 #define CONFIG_RAMBOOTCOMMAND                           \
 835         "setenv bootargs root=/dev/ram rw "             \
 836         "console=$consoledev,$baudrate $othbootargs;"   \
 837         "tftp $ramdiskaddr $ramdiskfile;"               \
 838         "tftp $loadaddr $bootfile;"                     \
 839         "tftp $fdtaddr $fdtfile;"                       \
 840         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 841
 842 #define CONFIG_BOOTCOMMAND              CONFIG_LINUX
 843
 844 #include <asm/fsl_secure_boot.h>
 845
 846 #endif  /* __CONFIG_H */