include/configs/B4860QDS.h

   1 /*
   2  * Copyright 2011-2012 Freescale Semiconductor, Inc.
   3  *
   4  * See file CREDITS for list of people who contributed to this
   5  * project.
   6  *
   7  * This program is free software; you can redistribute it and/or
   8  * modify it under the terms of the GNU General Public License as
   9  * published by the Free Software Foundation; either version 2 of
  10  * the License, or (at your option) any later version.
  11  *
  12  * This program is distributed in the hope that it will be useful,
  13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  15  * GNU General Public License for more details.
  16  *
  17  * You should have received a copy of the GNU General Public License
  18  * along with this program; if not, write to the Free Software
  19  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  20  * MA 02111-1307 USA
  21  */
  22
  23 #ifndef __CONFIG_H
  24 #define __CONFIG_H
  25
  26 /*
  27  * B4860 QDS board configuration file
  28  */
  29 #define CONFIG_B4860QDS
  30 #define CONFIG_PHYS_64BIT
  31
  32 #ifdef CONFIG_RAMBOOT_PBL
  33 #define CONFIG_RAMBOOT_TEXT_BASE        CONFIG_SYS_TEXT_BASE
  34 #define CONFIG_RESET_VECTOR_ADDRESS     0xfffffffc
  35 #endif
  36
  37 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
  38 /* Set 1M boot space */
  39 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000)
  40 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \
  41                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR)
  42 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
  43 #define CONFIG_SYS_NO_FLASH
  44 #endif
  45
  46 /* High Level Configuration Options */
  47 #define CONFIG_BOOKE
  48 #define CONFIG_E500                     /* BOOKE e500 family */
  49 #define CONFIG_E500MC                   /* BOOKE e500mc family */
  50 #define CONFIG_SYS_BOOK3E_HV            /* Category E.HV supported */
  51 #define CONFIG_MPC85xx                  /* MPC85xx/PQ3 platform */
  52 #define CONFIG_FSL_CORENET              /* Freescale CoreNet platform */
  53 #define CONFIG_MP                       /* support multiple processors */
  54
  55 #ifndef CONFIG_SYS_TEXT_BASE
  56 #define CONFIG_SYS_TEXT_BASE    0xeff80000
  57 #endif
  58
  59 #ifndef CONFIG_RESET_VECTOR_ADDRESS
  60 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
  61 #endif
  62
  63 #define CONFIG_SYS_FSL_CPC              /* Corenet Platform Cache */
  64 #define CONFIG_SYS_NUM_CPC              CONFIG_NUM_DDR_CONTROLLERS
  65 #define CONFIG_FSL_IFC                  /* Enable IFC Support */
  66 #define CONFIG_PCI                      /* Enable PCI/PCIE */
  67 #define CONFIG_PCIE1                    /* PCIE controler 1 */
  68 #define CONFIG_FSL_PCI_INIT             /* Use common FSL init code */
  69 #define CONFIG_SYS_PCI_64BIT            /* enable 64-bit PCI resources */
  70
  71 #ifndef CONFIG_PPC_B4420
  72 #define CONFIG_SYS_SRIO
  73 #define CONFIG_SRIO1                    /* SRIO port 1 */
  74 #define CONFIG_SRIO2                    /* SRIO port 2 */
  75 #define CONFIG_SRIO_PCIE_BOOT_MASTER
  76 #endif
  77
  78 #define CONFIG_FSL_LAW                  /* Use common FSL init code */
  79
  80 /* I2C bus multiplexer */
  81 #define I2C_MUX_PCA_ADDR                0x77
  82
  83 /* VSC Crossbar switches */
  84 #define CONFIG_VSC_CROSSBAR
  85 #define I2C_CH_DEFAULT                  0x8
  86 #define I2C_CH_VSC3316                  0xc
  87 #define I2C_CH_VSC3308                  0xd
  88
  89 #define VSC3316_TX_ADDRESS              0x70
  90 #define VSC3316_RX_ADDRESS              0x71
  91 #define VSC3308_TX_ADDRESS              0x02
  92 #define VSC3308_RX_ADDRESS              0x03
  93
  94 #define CONFIG_ENV_OVERWRITE
  95
  96 #ifdef CONFIG_SYS_NO_FLASH
  97 #if !defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) && !defined(CONFIG_RAMBOOT_PBL)
  98 #define CONFIG_ENV_IS_NOWHERE
  99 #endif
 100 #else
 101 #define CONFIG_FLASH_CFI_DRIVER
 102 #define CONFIG_SYS_FLASH_CFI
 103 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 104 #endif
 105
 106 #if defined(CONFIG_SPIFLASH)
 107 #define CONFIG_SYS_EXTRA_ENV_RELOC
 108 #define CONFIG_ENV_IS_IN_SPI_FLASH
 109 #define CONFIG_ENV_SPI_BUS              0
 110 #define CONFIG_ENV_SPI_CS               0
 111 #define CONFIG_ENV_SPI_MAX_HZ           10000000
 112 #define CONFIG_ENV_SPI_MODE             0
 113 #define CONFIG_ENV_SIZE                 0x2000          /* 8KB */
 114 #define CONFIG_ENV_OFFSET               0x100000        /* 1MB */
 115 #define CONFIG_ENV_SECT_SIZE            0x10000
 116 #elif defined(CONFIG_SDCARD)
 117 #define CONFIG_SYS_EXTRA_ENV_RELOC
 118 #define CONFIG_ENV_IS_IN_MMC
 119 #define CONFIG_SYS_MMC_ENV_DEV          0
 120 #define CONFIG_ENV_SIZE                 0x2000
 121 #define CONFIG_ENV_OFFSET               (512 * 1097)
 122 #elif defined(CONFIG_NAND)
 123 #define CONFIG_SYS_EXTRA_ENV_RELOC
 124 #define CONFIG_ENV_IS_IN_NAND
 125 #define CONFIG_ENV_SIZE                 CONFIG_SYS_NAND_BLOCK_SIZE
 126 #define CONFIG_ENV_OFFSET               (5 * CONFIG_SYS_NAND_BLOCK_SIZE)
 127 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 128 #define CONFIG_ENV_IS_IN_REMOTE
 129 #define CONFIG_ENV_ADDR         0xffe20000
 130 #define CONFIG_ENV_SIZE         0x2000
 131 #elif defined(CONFIG_ENV_IS_NOWHERE)
 132 #define CONFIG_ENV_SIZE         0x2000
 133 #else
 134 #define CONFIG_ENV_IS_IN_FLASH
 135 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 136 #define CONFIG_ENV_SIZE         0x2000
 137 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 138 #endif
 139
 140 #ifndef __ASSEMBLY__
 141 unsigned long get_board_sys_clk(void);
 142 unsigned long get_board_ddr_clk(void);
 143 #endif
 144 #define CONFIG_SYS_CLK_FREQ     get_board_sys_clk() /* sysclk for MPC85xx */
 145 #define CONFIG_DDR_CLK_FREQ     get_board_ddr_clk()
 146
 147 /*
 148  * These can be toggled for performance analysis, otherwise use default.
 149  */
 150 #define CONFIG_SYS_CACHE_STASHING
 151 #define CONFIG_BTB                      /* toggle branch predition */
 152 #define CONFIG_DDR_ECC
 153 #ifdef CONFIG_DDR_ECC
 154 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 155 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
 156 #endif
 157
 158 #define CONFIG_ENABLE_36BIT_PHYS
 159
 160 #ifdef CONFIG_PHYS_64BIT
 161 #define CONFIG_ADDR_MAP
 162 #define CONFIG_SYS_NUM_ADDR_MAP         64      /* number of TLB1 entries */
 163 #endif
 164
 165 #if 0
 166 #define CONFIG_POST CONFIG_SYS_POST_MEMORY      /* test POST memory test */
 167 #endif
 168 #define CONFIG_SYS_MEMTEST_START        0x00200000      /* memtest works on */
 169 #define CONFIG_SYS_MEMTEST_END          0x00400000
 170 #define CONFIG_SYS_ALT_MEMTEST
 171 #define CONFIG_PANIC_HANG       /* do not reset board on panic */
 172
 173 /*
 174  *  Config the L3 Cache as L3 SRAM
 175  */
 176 #define CONFIG_SYS_INIT_L3_ADDR         CONFIG_RAMBOOT_TEXT_BASE
 177
 178 #ifdef CONFIG_PHYS_64BIT
 179 #define CONFIG_SYS_DCSRBAR              0xf0000000
 180 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
 181 #endif
 182
 183 /* EEPROM */
 184 #define CONFIG_SYS_I2C_EEPROM_NXID
 185 #define CONFIG_SYS_EEPROM_BUS_NUM       0
 186 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x57
 187 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
 188 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
 189 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
 190
 191 /*
 192  * DDR Setup
 193  */
 194 #define CONFIG_VERY_BIG_RAM
 195 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 196 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 197
 198 /* CONFIG_NUM_DDR_CONTROLLERS is defined in include/asm/config_mpc85xx.h */
 199 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 200 #define CONFIG_CHIP_SELECTS_PER_CTRL    (4 * CONFIG_DIMM_SLOTS_PER_CTLR)
 201
 202 #define CONFIG_DDR_SPD
 203 #define CONFIG_SYS_DDR_RAW_TIMING
 204 #define CONFIG_FSL_DDR3
 205 #define CONFIG_FSL_DDR_INTERACTIVE
 206
 207 #define CONFIG_SYS_SPD_BUS_NUM  0
 208 #define SPD_EEPROM_ADDRESS1     0x51
 209 #define SPD_EEPROM_ADDRESS2     0x53
 210
 211 #define SPD_EEPROM_ADDRESS      SPD_EEPROM_ADDRESS1
 212 #define CONFIG_SYS_SDRAM_SIZE   2048    /* for fixed parameter use */
 213
 214 /*
 215  * IFC Definitions
 216  */
 217 #define CONFIG_SYS_FLASH_BASE   0xe0000000
 218 #ifdef CONFIG_PHYS_64BIT
 219 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
 220 #else
 221 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
 222 #endif
 223
 224 #define CONFIG_SYS_NOR0_CSPR_EXT        (0xf)
 225 #define CONFIG_SYS_NOR0_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \
 226                                 + 0x8000000) | \
 227                                 CSPR_PORT_SIZE_16 | \
 228                                 CSPR_MSEL_NOR | \
 229                                 CSPR_V)
 230 #define CONFIG_SYS_NOR1_CSPR_EXT        (0xf)
 231 #define CONFIG_SYS_NOR1_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
 232                                 CSPR_PORT_SIZE_16 | \
 233                                 CSPR_MSEL_NOR | \
 234                                 CSPR_V)
 235 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(128 * 1024 * 1024)
 236 /* NOR Flash Timing Params */
 237 #define CONFIG_SYS_NOR_CSOR     CSOR_NOR_ADM_SHIFT(4)
 238 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x01) | \
 239                                 FTIM0_NOR_TEADC(0x04) | \
 240                                 FTIM0_NOR_TEAHC(0x20))
 241 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
 242                                 FTIM1_NOR_TRAD_NOR(0x1A) |\
 243                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
 244 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x01) | \
 245                                 FTIM2_NOR_TCH(0x0E) | \
 246                                 FTIM2_NOR_TWPH(0x0E) | \
 247                                 FTIM2_NOR_TWP(0x1c))
 248 #define CONFIG_SYS_NOR_FTIM3    0x0
 249
 250 #define CONFIG_SYS_FLASH_QUIET_TEST
 251 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 252
 253 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* number of banks */
 254 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 255 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 256 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 257
 258 #define CONFIG_SYS_FLASH_EMPTY_INFO
 259 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS \
 260                                         + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS}
 261
 262 #define CONFIG_FSL_QIXIS        /* use common QIXIS code */
 263 #define CONFIG_FSL_QIXIS_V2
 264 #define QIXIS_BASE              0xffdf0000
 265 #ifdef CONFIG_PHYS_64BIT
 266 #define QIXIS_BASE_PHYS         (0xf00000000ull | QIXIS_BASE)
 267 #else
 268 #define QIXIS_BASE_PHYS         QIXIS_BASE
 269 #endif
 270 #define QIXIS_LBMAP_SWITCH              0x01
 271 #define QIXIS_LBMAP_MASK                0x0f
 272 #define QIXIS_LBMAP_SHIFT               0
 273 #define QIXIS_LBMAP_DFLTBANK            0x00
 274 #define QIXIS_LBMAP_ALTBANK             0x02
 275 #define QIXIS_RST_CTL_RESET             0x31
 276 #define QIXIS_RCFG_CTL_RECONFIG_IDLE    0x20
 277 #define QIXIS_RCFG_CTL_RECONFIG_START   0x21
 278 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE   0x08
 279
 280 #define CONFIG_SYS_CSPR3_EXT    (0xf)
 281 #define CONFIG_SYS_CSPR3        (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \
 282                                 | CSPR_PORT_SIZE_8 \
 283                                 | CSPR_MSEL_GPCM \
 284                                 | CSPR_V)
 285 #define CONFIG_SYS_AMASK3       IFC_AMASK(4 * 1024)
 286 #define CONFIG_SYS_CSOR3        0x0
 287 /* QIXIS Timing parameters for IFC CS3 */
 288 #define CONFIG_SYS_CS3_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 289                                         FTIM0_GPCM_TEADC(0x0e) | \
 290                                         FTIM0_GPCM_TEAHC(0x0e))
 291 #define CONFIG_SYS_CS3_FTIM1            (FTIM1_GPCM_TACO(0x0e) | \
 292                                         FTIM1_GPCM_TRAD(0x1f))
 293 #define CONFIG_SYS_CS3_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
 294                                         FTIM2_GPCM_TCH(0x0) | \
 295                                         FTIM2_GPCM_TWP(0x1f))
 296 #define CONFIG_SYS_CS3_FTIM3            0x0
 297
 298 /* NAND Flash on IFC */
 299 #define CONFIG_NAND_FSL_IFC
 300 #define CONFIG_SYS_NAND_BASE            0xff800000
 301 #ifdef CONFIG_PHYS_64BIT
 302 #define CONFIG_SYS_NAND_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_NAND_BASE)
 303 #else
 304 #define CONFIG_SYS_NAND_BASE_PHYS       CONFIG_SYS_NAND_BASE
 305 #endif
 306
 307 #define CONFIG_SYS_NAND_CSPR_EXT        (0xf)
 308 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 309                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
 310                                 | CSPR_MSEL_NAND        /* MSEL = NAND */ \
 311                                 | CSPR_V)
 312 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64 * 1024)
 313
 314 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 315                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 316                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 317                                 | CSOR_NAND_RAL_3       /* RAL = 2Byes */ \
 318                                 | CSOR_NAND_PGS_2K      /* Page Size = 2K */ \
 319                                 | CSOR_NAND_SPRZ_64/* Spare size = 64 */ \
 320                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
 321
 322 #define CONFIG_SYS_NAND_ONFI_DETECTION
 323
 324 /* ONFI NAND Flash mode0 Timing Params */
 325 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x07) | \
 326                                         FTIM0_NAND_TWP(0x18)   | \
 327                                         FTIM0_NAND_TWCHT(0x07) | \
 328                                         FTIM0_NAND_TWH(0x0a))
 329 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
 330                                         FTIM1_NAND_TWBE(0x39)  | \
 331                                         FTIM1_NAND_TRR(0x0e)   | \
 332                                         FTIM1_NAND_TRP(0x18))
 333 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x0f) | \
 334                                         FTIM2_NAND_TREH(0x0a) | \
 335                                         FTIM2_NAND_TWHRE(0x1e))
 336 #define CONFIG_SYS_NAND_FTIM3           0x0
 337
 338 #define CONFIG_SYS_NAND_DDR_LAW         11
 339
 340 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 341 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 342 #define CONFIG_MTD_NAND_VERIFY_WRITE
 343 #define CONFIG_CMD_NAND
 344
 345 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
 346
 347 #if defined(CONFIG_NAND)
 348 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
 349 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 350 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 351 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 352 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 353 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 354 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 355 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 356 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 357 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NOR0_CSPR
 358 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NOR_AMASK
 359 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NOR_CSOR
 360 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NOR_FTIM0
 361 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NOR_FTIM1
 362 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NOR_FTIM2
 363 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NOR_FTIM3
 364 #else
 365 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 366 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR
 367 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 368 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 369 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 370 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 371 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 372 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 373 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NAND_CSPR_EXT
 374 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NAND_CSPR
 375 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NAND_AMASK
 376 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NAND_CSOR
 377 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NAND_FTIM0
 378 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NAND_FTIM1
 379 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NAND_FTIM2
 380 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NAND_FTIM3
 381 #endif
 382 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR1_CSPR_EXT
 383 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR1_CSPR
 384 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 385 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 386 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 387 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 388 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 389 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 390
 391 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_TEXT_BASE
 392
 393 #if defined(CONFIG_RAMBOOT_PBL)
 394 #define CONFIG_SYS_RAMBOOT
 395 #endif
 396
 397 #define CONFIG_BOARD_EARLY_INIT_R
 398 #define CONFIG_MISC_INIT_R
 399
 400 #define CONFIG_HWCONFIG
 401
 402 /* define to use L1 as initial stack */
 403 #define CONFIG_L1_INIT_RAM
 404 #define CONFIG_SYS_INIT_RAM_LOCK
 405 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000      /* Initial L1 address */
 406 #ifdef CONFIG_PHYS_64BIT
 407 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH      0xf
 408 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW       0xfe0ec000
 409 /* The assembler doesn't like typecast */
 410 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 411         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 412           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 413 #else
 414 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS   0xfe0ec000 /* Initial L1 address */
 415 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0
 416 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS
 417 #endif
 418 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000
 419
 420 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 421                                         GENERATED_GBL_DATA_SIZE)
 422 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 423
 424 #define CONFIG_SYS_MONITOR_LEN          (512 * 1024)
 425 #define CONFIG_SYS_MALLOC_LEN           (4 * 1024 * 1024)
 426
 427 /* Serial Port - controlled on board with jumper J8
 428  * open - index 2
 429  * shorted - index 1
 430  */
 431 #define CONFIG_CONS_INDEX       1
 432 #define CONFIG_SYS_NS16550
 433 #define CONFIG_SYS_NS16550_SERIAL
 434 #define CONFIG_SYS_NS16550_REG_SIZE     1
 435 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 436
 437 #define CONFIG_SYS_BAUDRATE_TABLE       \
 438         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 439
 440 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 441 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 442 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 443 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 444 #define CONFIG_SERIAL_MULTI             /* Enable both serial ports */
 445 #define CONFIG_SYS_CONSOLE_IS_IN_ENV    /* determine from environment */
 446
 447
 448 /* Use the HUSH parser */
 449 #define CONFIG_SYS_HUSH_PARSER
 450 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 451
 452 /* pass open firmware flat tree */
 453 #define CONFIG_OF_LIBFDT
 454 #define CONFIG_OF_BOARD_SETUP
 455 #define CONFIG_OF_STDOUT_VIA_ALIAS
 456
 457 /* new uImage format support */
 458 #define CONFIG_FIT
 459 #define CONFIG_FIT_VERBOSE      /* enable fit_format_{error,warning}() */
 460
 461 /* I2C */
 462 #define CONFIG_FSL_I2C          /* Use FSL common I2C driver */
 463 #define CONFIG_HARD_I2C         /* I2C with hardware support */
 464 #define CONFIG_I2C_MULTI_BUS
 465 #define CONFIG_I2C_CMD_TREE
 466 #define CONFIG_SYS_I2C_SPEED            400000  /* I2C speed in Hz */
 467 #define CONFIG_SYS_I2C_SLAVE            0x7F
 468 #define CONFIG_SYS_I2C_OFFSET           0x118000
 469 #define CONFIG_SYS_I2C2_OFFSET          0x119000
 470
 471 /*
 472  * RTC configuration
 473  */
 474 #define RTC
 475 #define CONFIG_RTC_DS3231               1
 476 #define CONFIG_SYS_I2C_RTC_ADDR         0x68
 477
 478 /*
 479  * RapidIO
 480  */
 481 #ifdef CONFIG_SYS_SRIO
 482 #ifdef CONFIG_SRIO1
 483 #define CONFIG_SYS_SRIO1_MEM_VIRT       0xa0000000
 484 #ifdef CONFIG_PHYS_64BIT
 485 #define CONFIG_SYS_SRIO1_MEM_PHYS       0xc20000000ull
 486 #else
 487 #define CONFIG_SYS_SRIO1_MEM_PHYS       0xa0000000
 488 #endif
 489 #define CONFIG_SYS_SRIO1_MEM_SIZE       0x10000000      /* 256M */
 490 #endif
 491
 492 #ifdef CONFIG_SRIO2
 493 #define CONFIG_SYS_SRIO2_MEM_VIRT       0xb0000000
 494 #ifdef CONFIG_PHYS_64BIT
 495 #define CONFIG_SYS_SRIO2_MEM_PHYS       0xc30000000ull
 496 #else
 497 #define CONFIG_SYS_SRIO2_MEM_PHYS       0xb0000000
 498 #endif
 499 #define CONFIG_SYS_SRIO2_MEM_SIZE       0x10000000      /* 256M */
 500 #endif
 501 #endif
 502
 503 /*
 504  * for slave u-boot IMAGE instored in master memory space,
 505  * PHYS must be aligned based on the SIZE
 506  */
 507 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef080000ull
 508 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff80000ull
 509 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x80000        /* 512K */
 510 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff80000ull
 511 /*
 512  * for slave UCODE and ENV instored in master memory space,
 513  * PHYS must be aligned based on the SIZE
 514  */
 515 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef040000ull
 516 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull
 517 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE 0x40000    /* 256K */
 518
 519 /* slave core release by master*/
 520 #define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4
 521 #define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */
 522
 523 /*
 524  * SRIO_PCIE_BOOT - SLAVE
 525  */
 526 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
 527 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000
 528 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \
 529                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR)
 530 #endif
 531
 532 /*
 533  * eSPI - Enhanced SPI
 534  */
 535 #define CONFIG_FSL_ESPI
 536 #define CONFIG_SPI_FLASH
 537 #define CONFIG_SPI_FLASH_SST
 538 #define CONFIG_CMD_SF
 539 #define CONFIG_SF_DEFAULT_SPEED         10000000
 540 #define CONFIG_SF_DEFAULT_MODE          0
 541
 542 /*
 543  * MAPLE
 544  */
 545 #ifdef CONFIG_PHYS_64BIT
 546 #define CONFIG_SYS_MAPLE_MEM_PHYS      0xFA0000000ull
 547 #else
 548 #define CONFIG_SYS_MAPLE_MEM_PHYS      0xA0000000
 549 #endif
 550
 551 /*
 552  * General PCI
 553  * Memory space is mapped 1-1, but I/O space must start from 0.
 554  */
 555
 556 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 557 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 558 #ifdef CONFIG_PHYS_64BIT
 559 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
 560 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 561 #else
 562 #define CONFIG_SYS_PCIE1_MEM_BUS        0x80000000
 563 #define CONFIG_SYS_PCIE1_MEM_PHYS       0x80000000
 564 #endif
 565 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x20000000      /* 512M */
 566 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 567 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 568 #ifdef CONFIG_PHYS_64BIT
 569 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 570 #else
 571 #define CONFIG_SYS_PCIE1_IO_PHYS        0xf8000000
 572 #endif
 573 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 574
 575 /* Qman/Bman */
 576 #ifndef CONFIG_NOBQFMAN
 577 #define CONFIG_SYS_DPAA_QBMAN           /* Support Q/Bman */
 578 #define CONFIG_SYS_BMAN_NUM_PORTALS     25
 579 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 580 #ifdef CONFIG_PHYS_64BIT
 581 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 582 #else
 583 #define CONFIG_SYS_BMAN_MEM_PHYS        CONFIG_SYS_BMAN_MEM_BASE
 584 #endif
 585 #define CONFIG_SYS_BMAN_MEM_SIZE        0x02000000
 586 #define CONFIG_SYS_QMAN_NUM_PORTALS     25
 587 #define CONFIG_SYS_QMAN_MEM_BASE        0xf6000000
 588 #ifdef CONFIG_PHYS_64BIT
 589 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff6000000ull
 590 #else
 591 #define CONFIG_SYS_QMAN_MEM_PHYS        CONFIG_SYS_QMAN_MEM_BASE
 592 #endif
 593 #define CONFIG_SYS_QMAN_MEM_SIZE        0x02000000
 594
 595 #define CONFIG_SYS_DPAA_FMAN
 596
 597 /* Default address of microcode for the Linux Fman driver */
 598 #if defined(CONFIG_SPIFLASH)
 599 /*
 600  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
 601  * env, so we got 0x110000.
 602  */
 603 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
 604 #define CONFIG_SYS_QE_FMAN_FW_ADDR      0x110000
 605 #elif defined(CONFIG_SDCARD)
 606 /*
 607  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 608  * about 545KB (1089 blocks), Env is stored after the image, and the env size is
 609  * 0x2000 (16 blocks), 8 + 1089 + 16 = 1113, enlarge it to 1130.
 610  */
 611 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
 612 #define CONFIG_SYS_QE_FMAN_FW_ADDR      (512 * 1130)
 613 #elif defined(CONFIG_NAND)
 614 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
 615 #define CONFIG_SYS_QE_FMAN_FW_ADDR      (6 * CONFIG_SYS_NAND_BLOCK_SIZE)
 616 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 617 /*
 618  * Slave has no ucode locally, it can fetch this from remote. When implementing
 619  * in two corenet boards, slave's ucode could be stored in master's memory
 620  * space, the address can be mapped from slave TLB->slave LAW->
 621  * slave SRIO or PCIE outbound window->master inbound window->
 622  * master LAW->the ucode address in master's memory space.
 623  */
 624 #define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE
 625 #define CONFIG_SYS_QE_FMAN_FW_ADDR      0xFFE00000
 626 #else
 627 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 628 #define CONFIG_SYS_QE_FMAN_FW_ADDR              0xEFF40000
 629 #endif
 630 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 631 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 632 #endif /* CONFIG_NOBQFMAN */
 633
 634 #ifdef CONFIG_SYS_DPAA_FMAN
 635 #define CONFIG_FMAN_ENET
 636 #define CONFIG_PHYLIB_10G
 637 #define CONFIG_PHY_VITESSE
 638 #define CONFIG_PHY_TERANETICS
 639 #define SGMII_CARD_PORT1_PHY_ADDR 0x1C
 640 #define SGMII_CARD_PORT2_PHY_ADDR 0x10
 641 #define SGMII_CARD_PORT3_PHY_ADDR 0x1E
 642 #define SGMII_CARD_PORT4_PHY_ADDR 0x11
 643 #endif
 644
 645 #ifdef CONFIG_PCI
 646 #define CONFIG_PCI_INDIRECT_BRIDGE
 647 #define CONFIG_NET_MULTI
 648 #define CONFIG_PCI_PNP                  /* do pci plug-and-play */
 649 #define CONFIG_E1000
 650
 651 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 652 #define CONFIG_DOS_PARTITION
 653 #endif  /* CONFIG_PCI */
 654
 655 #ifdef CONFIG_FMAN_ENET
 656 #define CONFIG_SYS_FM1_DTSEC5_PHY_ADDR  0x10
 657 #define CONFIG_SYS_FM1_DTSEC6_PHY_ADDR  0x11
 658
 659 /*B4860 QDS AMC2PEX-2S default PHY_ADDR */
 660 #define CONFIG_SYS_FM1_10GEC1_PHY_ADDR 0x7       /*SLOT 1*/
 661 #define CONFIG_SYS_FM1_10GEC2_PHY_ADDR 0x6       /*SLOT 2*/
 662
 663
 664 #define CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR    0x1c
 665 #define CONFIG_SYS_FM1_DTSEC2_RISER_PHY_ADDR    0x1d
 666 #define CONFIG_SYS_FM1_DTSEC3_RISER_PHY_ADDR    0x1e
 667 #define CONFIG_SYS_FM1_DTSEC4_RISER_PHY_ADDR    0x1f
 668
 669 #define CONFIG_MII              /* MII PHY management */
 670 #define CONFIG_ETHPRIME         "FM1@DTSEC1"
 671 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
 672 #endif
 673
 674 /*
 675  * Environment
 676  */
 677 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 678 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 679
 680 /*
 681  * Command line configuration.
 682  */
 683 #include <config_cmd_default.h>
 684
 685 #define CONFIG_CMD_DATE
 686 #define CONFIG_CMD_DHCP
 687 #define CONFIG_CMD_EEPROM
 688 #define CONFIG_CMD_ELF
 689 #define CONFIG_CMD_ERRATA
 690 #define CONFIG_CMD_GREPENV
 691 #define CONFIG_CMD_IRQ
 692 #define CONFIG_CMD_I2C
 693 #define CONFIG_CMD_MII
 694 #define CONFIG_CMD_PING
 695 #define CONFIG_CMD_REGINFO
 696 #define CONFIG_CMD_SETEXPR
 697
 698 #ifdef CONFIG_PCI
 699 #define CONFIG_CMD_PCI
 700 #define CONFIG_CMD_NET
 701 #endif
 702
 703 /*
 704 * USB
 705 */
 706 #define CONFIG_HAS_FSL_DR_USB
 707
 708 #ifdef CONFIG_HAS_FSL_DR_USB
 709 #define CONFIG_USB_EHCI
 710
 711 #ifdef CONFIG_USB_EHCI
 712 #define CONFIG_CMD_USB
 713 #define CONFIG_USB_STORAGE
 714 #define CONFIG_USB_EHCI_FSL
 715 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 716 #define CONFIG_CMD_EXT2
 717 #endif
 718 #endif
 719
 720 /*
 721  * Miscellaneous configurable options
 722  */
 723 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 724 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
 725 #define CONFIG_AUTO_COMPLETE                    /* add autocompletion support */
 726 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 727 #define CONFIG_SYS_PROMPT       "=> "           /* Monitor Command Prompt */
 728 #ifdef CONFIG_CMD_KGDB
 729 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
 730 #else
 731 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 732 #endif
 733 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 734 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
 735 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
 736 #define CONFIG_SYS_HZ           1000            /* decrementer freq: 1ms ticks*/
 737
 738 /*
 739  * For booting Linux, the board info and command line data
 740  * have to be in the first 64 MB of memory, since this is
 741  * the maximum mapped by the Linux kernel during initialization.
 742  */
 743 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial map for Linux*/
 744 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 745
 746 #ifdef CONFIG_CMD_KGDB
 747 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 748 #define CONFIG_KGDB_SER_INDEX   2       /* which serial port to use */
 749 #endif
 750
 751 /*
 752  * Environment Configuration
 753  */
 754 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 755 #define CONFIG_BOOTFILE         "uImage"
 756 #define CONFIG_UBOOTPATH        "u-boot.bin"    /* U-Boot image on TFTP server*/
 757
 758 /* default location for tftp and bootm */
 759 #define CONFIG_LOADADDR         1000000
 760
 761 #define CONFIG_BOOTDELAY        10      /* -1 disables auto-boot */
 762
 763 #define CONFIG_BAUDRATE 115200
 764
 765 #define __USB_PHY_TYPE  ulpi
 766
 767 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 768         "hwconfig=fsl_ddr:ctlr_intlv=null,"             \
 769         "bank_intlv=cs0_cs1;"                                   \
 770         "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
 771         "netdev=eth0\0"                                         \
 772         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"                     \
 773         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"                     \
 774         "tftpflash=tftpboot $loadaddr $uboot && "               \
 775         "protect off $ubootaddr +$filesize && "                 \
 776         "erase $ubootaddr +$filesize && "                       \
 777         "cp.b $loadaddr $ubootaddr $filesize && "               \
 778         "protect on $ubootaddr +$filesize && "                  \
 779         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 780         "consoledev=ttyS0\0"                                    \
 781         "ramdiskaddr=2000000\0"                                 \
 782         "ramdiskfile=b4860qds/ramdisk.uboot\0"                  \
 783         "fdtaddr=c00000\0"                                      \
 784         "fdtfile=b4860qds/b4860qds.dtb\0"                               \
 785         "bdev=sda3\0"                                           \
 786         "c=ffe\0"
 787
 788 /* For emulation this causes u-boot to jump to the start of the proof point
 789    app code automatically */
 790 #define CONFIG_PROOF_POINTS                     \
 791  "setenv bootargs root=/dev/$bdev rw "          \
 792  "console=$consoledev,$baudrate $othbootargs;"  \
 793  "cpu 1 release 0x29000000 - - -;"              \
 794  "cpu 2 release 0x29000000 - - -;"              \
 795  "cpu 3 release 0x29000000 - - -;"              \
 796  "cpu 4 release 0x29000000 - - -;"              \
 797  "cpu 5 release 0x29000000 - - -;"              \
 798  "cpu 6 release 0x29000000 - - -;"              \
 799  "cpu 7 release 0x29000000 - - -;"              \
 800  "go 0x29000000"
 801
 802 #define CONFIG_HVBOOT   \
 803  "setenv bootargs config-addr=0x60000000; "     \
 804  "bootm 0x01000000 - 0x00f00000"
 805
 806 #define CONFIG_ALU                              \
 807  "setenv bootargs root=/dev/$bdev rw "          \
 808  "console=$consoledev,$baudrate $othbootargs;"  \
 809  "cpu 1 release 0x01000000 - - -;"              \
 810  "cpu 2 release 0x01000000 - - -;"              \
 811  "cpu 3 release 0x01000000 - - -;"              \
 812  "cpu 4 release 0x01000000 - - -;"              \
 813  "cpu 5 release 0x01000000 - - -;"              \
 814  "cpu 6 release 0x01000000 - - -;"              \
 815  "cpu 7 release 0x01000000 - - -;"              \
 816  "go 0x01000000"
 817
 818 #define CONFIG_LINUX                            \
 819  "setenv bootargs root=/dev/ram rw "            \
 820  "console=$consoledev,$baudrate $othbootargs;"  \
 821  "setenv ramdiskaddr 0x02000000;"               \
 822  "setenv fdtaddr 0x00c00000;"                   \
 823  "setenv loadaddr 0x1000000;"                   \
 824  "bootm $loadaddr $ramdiskaddr $fdtaddr"
 825
 826 #define CONFIG_HDBOOT                                   \
 827         "setenv bootargs root=/dev/$bdev rw "           \
 828         "console=$consoledev,$baudrate $othbootargs;"   \
 829         "tftp $loadaddr $bootfile;"                     \
 830         "tftp $fdtaddr $fdtfile;"                       \
 831         "bootm $loadaddr - $fdtaddr"
 832
 833 #define CONFIG_NFSBOOTCOMMAND                   \
 834         "setenv bootargs root=/dev/nfs rw "     \
 835         "nfsroot=$serverip:$rootpath "          \
 836         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 837         "console=$consoledev,$baudrate $othbootargs;"   \
 838         "tftp $loadaddr $bootfile;"             \
 839         "tftp $fdtaddr $fdtfile;"               \
 840         "bootm $loadaddr - $fdtaddr"
 841
 842 #define CONFIG_RAMBOOTCOMMAND                           \
 843         "setenv bootargs root=/dev/ram rw "             \
 844         "console=$consoledev,$baudrate $othbootargs;"   \
 845         "tftp $ramdiskaddr $ramdiskfile;"               \
 846         "tftp $loadaddr $bootfile;"                     \
 847         "tftp $fdtaddr $fdtfile;"                       \
 848         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 849
 850 #define CONFIG_BOOTCOMMAND              CONFIG_LINUX
 851
 852 #ifdef CONFIG_SECURE_BOOT
 853 #include <asm/fsl_secure_boot.h>
 854 #endif
 855
 856 #endif  /* __CONFIG_H */