include/configs/B4860QDS.h

   1 /*
   2  * Copyright 2011-2012 Freescale Semiconductor, Inc.
   3  *
   4  * See file CREDITS for list of people who contributed to this
   5  * project.
   6  *
   7  * This program is free software; you can redistribute it and/or
   8  * modify it under the terms of the GNU General Public License as
   9  * published by the Free Software Foundation; either version 2 of
  10  * the License, or (at your option) any later version.
  11  *
  12  * This program is distributed in the hope that it will be useful,
  13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  15  * GNU General Public License for more details.
  16  *
  17  * You should have received a copy of the GNU General Public License
  18  * along with this program; if not, write to the Free Software
  19  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  20  * MA 02111-1307 USA
  21  */
  22
  23 #ifndef __CONFIG_H
  24 #define __CONFIG_H
  25
  26 /*
  27  * B4860 QDS board configuration file
  28  */
  29 #define CONFIG_B4860QDS
  30 #define CONFIG_PHYS_64BIT
  31
  32 #ifdef CONFIG_RAMBOOT_PBL
  33 #define CONFIG_RAMBOOT_TEXT_BASE        CONFIG_SYS_TEXT_BASE
  34 #define CONFIG_RESET_VECTOR_ADDRESS     0xfffffffc
  35 #endif
  36
  37 /* High Level Configuration Options */
  38 #define CONFIG_BOOKE
  39 #define CONFIG_E500                     /* BOOKE e500 family */
  40 #define CONFIG_E500MC                   /* BOOKE e500mc family */
  41 #define CONFIG_SYS_BOOK3E_HV            /* Category E.HV supported */
  42 #define CONFIG_MPC85xx                  /* MPC85xx/PQ3 platform */
  43 #define CONFIG_FSL_CORENET              /* Freescale CoreNet platform */
  44 #define CONFIG_MP                       /* support multiple processors */
  45
  46 #ifndef CONFIG_SYS_TEXT_BASE
  47 #define CONFIG_SYS_TEXT_BASE    0xeff80000
  48 #endif
  49
  50 #ifndef CONFIG_RESET_VECTOR_ADDRESS
  51 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
  52 #endif
  53
  54 #define CONFIG_SYS_FSL_CPC              /* Corenet Platform Cache */
  55 #define CONFIG_SYS_NUM_CPC              CONFIG_NUM_DDR_CONTROLLERS
  56 #define CONFIG_FSL_IFC                  /* Enable IFC Support */
  57 #define CONFIG_PCI                      /* Enable PCI/PCIE */
  58 #define CONFIG_PCIE1                    /* PCIE controler 1 */
  59 #define CONFIG_FSL_PCI_INIT             /* Use common FSL init code */
  60 #define CONFIG_SYS_PCI_64BIT            /* enable 64-bit PCI resources */
  61
  62 #ifndef CONFIG_PPC_B4420
  63 #define CONFIG_SYS_SRIO
  64 #define CONFIG_SRIO1                    /* SRIO port 1 */
  65 #define CONFIG_SRIO2                    /* SRIO port 2 */
  66 #endif
  67
  68 #define CONFIG_FSL_LAW                  /* Use common FSL init code */
  69
  70 /* I2C bus multiplexer */
  71 #define I2C_MUX_PCA_ADDR                0x77
  72
  73 /* VSC Crossbar switches */
  74 #define CONFIG_VSC_CROSSBAR
  75 #define I2C_CH_DEFAULT                  0x8
  76 #define I2C_CH_VSC3316                  0xc
  77 #define I2C_CH_VSC3308                  0xd
  78
  79 #define VSC3316_TX_ADDRESS              0x70
  80 #define VSC3316_RX_ADDRESS              0x71
  81 #define VSC3308_TX_ADDRESS              0x02
  82 #define VSC3308_RX_ADDRESS              0x03
  83
  84 #define CONFIG_ENV_OVERWRITE
  85
  86 #ifdef CONFIG_SYS_NO_FLASH
  87 #define CONFIG_ENV_IS_NOWHERE
  88 #else
  89 #define CONFIG_FLASH_CFI_DRIVER
  90 #define CONFIG_SYS_FLASH_CFI
  91 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
  92 #endif
  93
  94 #ifndef CONFIG_SYS_NO_FLASH
  95 #if defined(CONFIG_SPIFLASH)
  96 #define CONFIG_SYS_EXTRA_ENV_RELOC
  97 #define CONFIG_ENV_IS_IN_SPI_FLASH
  98 #define CONFIG_ENV_SPI_BUS              0
  99 #define CONFIG_ENV_SPI_CS               0
 100 #define CONFIG_ENV_SPI_MAX_HZ           10000000
 101 #define CONFIG_ENV_SPI_MODE             0
 102 #define CONFIG_ENV_SIZE                 0x2000          /* 8KB */
 103 #define CONFIG_ENV_OFFSET               0x100000        /* 1MB */
 104 #define CONFIG_ENV_SECT_SIZE            0x10000
 105 #elif defined(CONFIG_SDCARD)
 106 #define CONFIG_SYS_EXTRA_ENV_RELOC
 107 #define CONFIG_ENV_IS_IN_MMC
 108 #define CONFIG_SYS_MMC_ENV_DEV          0
 109 #define CONFIG_ENV_SIZE                 0x2000
 110 #define CONFIG_ENV_OFFSET               (512 * 1097)
 111 #elif defined(CONFIG_NAND)
 112 #define CONFIG_SYS_EXTRA_ENV_RELOC
 113 #define CONFIG_ENV_IS_IN_NAND
 114 #define CONFIG_ENV_SIZE                 CONFIG_SYS_NAND_BLOCK_SIZE
 115 #define CONFIG_ENV_OFFSET               (5 * CONFIG_SYS_NAND_BLOCK_SIZE)
 116 #else
 117 #define CONFIG_ENV_IS_IN_FLASH
 118 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 119 #define CONFIG_ENV_SIZE         0x2000
 120 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 121 #endif
 122 #else /* CONFIG_SYS_NO_FLASH */
 123 #define CONFIG_ENV_SIZE                0x2000
 124 #define CONFIG_ENV_SECT_SIZE   0x20000 /* 128K (one sector) */
 125 #endif
 126
 127 #ifndef __ASSEMBLY__
 128 unsigned long get_board_sys_clk(void);
 129 unsigned long get_board_ddr_clk(void);
 130 #endif
 131 #define CONFIG_SYS_CLK_FREQ     get_board_sys_clk() /* sysclk for MPC85xx */
 132 #define CONFIG_DDR_CLK_FREQ     get_board_ddr_clk()
 133
 134 /*
 135  * These can be toggled for performance analysis, otherwise use default.
 136  */
 137 #define CONFIG_SYS_CACHE_STASHING
 138 #define CONFIG_BTB                      /* toggle branch predition */
 139 #define CONFIG_DDR_ECC
 140 #ifdef CONFIG_DDR_ECC
 141 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 142 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
 143 #endif
 144
 145 #define CONFIG_ENABLE_36BIT_PHYS
 146
 147 #ifdef CONFIG_PHYS_64BIT
 148 #define CONFIG_ADDR_MAP
 149 #define CONFIG_SYS_NUM_ADDR_MAP         64      /* number of TLB1 entries */
 150 #endif
 151
 152 #if 0
 153 #define CONFIG_POST CONFIG_SYS_POST_MEMORY      /* test POST memory test */
 154 #endif
 155 #define CONFIG_SYS_MEMTEST_START        0x00200000      /* memtest works on */
 156 #define CONFIG_SYS_MEMTEST_END          0x00400000
 157 #define CONFIG_SYS_ALT_MEMTEST
 158 #define CONFIG_PANIC_HANG       /* do not reset board on panic */
 159
 160 /*
 161  *  Config the L3 Cache as L3 SRAM
 162  */
 163 #define CONFIG_SYS_INIT_L3_ADDR         CONFIG_RAMBOOT_TEXT_BASE
 164
 165 #ifdef CONFIG_PHYS_64BIT
 166 #define CONFIG_SYS_DCSRBAR              0xf0000000
 167 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
 168 #endif
 169
 170 /* EEPROM */
 171 #define CONFIG_SYS_I2C_EEPROM_NXID
 172 #define CONFIG_SYS_EEPROM_BUS_NUM       0
 173 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x57
 174 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
 175 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
 176 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
 177
 178 /*
 179  * DDR Setup
 180  */
 181 #define CONFIG_VERY_BIG_RAM
 182 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 183 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 184
 185 /* CONFIG_NUM_DDR_CONTROLLERS is defined in include/asm/config_mpc85xx.h */
 186 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 187 #define CONFIG_CHIP_SELECTS_PER_CTRL    (4 * CONFIG_DIMM_SLOTS_PER_CTLR)
 188
 189 #define CONFIG_DDR_SPD
 190 #define CONFIG_SYS_DDR_RAW_TIMING
 191 #define CONFIG_FSL_DDR3
 192 #define CONFIG_FSL_DDR_INTERACTIVE
 193
 194 #define CONFIG_SYS_SPD_BUS_NUM  0
 195 #define SPD_EEPROM_ADDRESS1     0x51
 196 #define SPD_EEPROM_ADDRESS2     0x53
 197
 198 #define SPD_EEPROM_ADDRESS      SPD_EEPROM_ADDRESS1
 199 #define CONFIG_SYS_SDRAM_SIZE   2048    /* for fixed parameter use */
 200
 201 /*
 202  * IFC Definitions
 203  */
 204 #define CONFIG_SYS_FLASH_BASE   0xe0000000
 205 #ifdef CONFIG_PHYS_64BIT
 206 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
 207 #else
 208 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
 209 #endif
 210
 211 #define CONFIG_SYS_NOR0_CSPR_EXT        (0xf)
 212 #define CONFIG_SYS_NOR0_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \
 213                                 + 0x8000000) | \
 214                                 CSPR_PORT_SIZE_16 | \
 215                                 CSPR_MSEL_NOR | \
 216                                 CSPR_V)
 217 #define CONFIG_SYS_NOR1_CSPR_EXT        (0xf)
 218 #define CONFIG_SYS_NOR1_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
 219                                 CSPR_PORT_SIZE_16 | \
 220                                 CSPR_MSEL_NOR | \
 221                                 CSPR_V)
 222 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(128 * 1024 * 1024)
 223 /* NOR Flash Timing Params */
 224 #define CONFIG_SYS_NOR_CSOR     CSOR_NOR_ADM_SHIFT(4)
 225 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x01) | \
 226                                 FTIM0_NOR_TEADC(0x01) | \
 227                                 FTIM0_NOR_TEAHC(0x20))
 228 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
 229                                 FTIM1_NOR_TRAD_NOR(0x1A) |\
 230                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
 231 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x01) | \
 232                                 FTIM2_NOR_TCH(0x0E) | \
 233                                 FTIM2_NOR_TWPH(0x0E) | \
 234                                 FTIM2_NOR_TWP(0x1c))
 235 #define CONFIG_SYS_NOR_FTIM3    0x0
 236
 237 #define CONFIG_SYS_FLASH_QUIET_TEST
 238 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 239
 240 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* number of banks */
 241 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 242 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 243 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 244
 245 #define CONFIG_SYS_FLASH_EMPTY_INFO
 246 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS \
 247                                         + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS}
 248
 249 #define CONFIG_FSL_QIXIS        /* use common QIXIS code */
 250 #define CONFIG_FSL_QIXIS_V2
 251 #define QIXIS_BASE              0xffdf0000
 252 #ifdef CONFIG_PHYS_64BIT
 253 #define QIXIS_BASE_PHYS         (0xf00000000ull | QIXIS_BASE)
 254 #else
 255 #define QIXIS_BASE_PHYS         QIXIS_BASE
 256 #endif
 257 #define QIXIS_LBMAP_SWITCH              0x01
 258 #define QIXIS_LBMAP_MASK                0x0f
 259 #define QIXIS_LBMAP_SHIFT               0
 260 #define QIXIS_LBMAP_DFLTBANK            0x00
 261 #define QIXIS_LBMAP_ALTBANK             0x02
 262 #define QIXIS_RST_CTL_RESET             0x31
 263 #define QIXIS_RCFG_CTL_RECONFIG_IDLE    0x20
 264 #define QIXIS_RCFG_CTL_RECONFIG_START   0x21
 265 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE   0x08
 266
 267 #define CONFIG_SYS_CSPR3_EXT    (0xf)
 268 #define CONFIG_SYS_CSPR3        (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \
 269                                 | CSPR_PORT_SIZE_8 \
 270                                 | CSPR_MSEL_GPCM \
 271                                 | CSPR_V)
 272 #define CONFIG_SYS_AMASK3       IFC_AMASK(4 * 1024)
 273 #define CONFIG_SYS_CSOR3        0x0
 274 /* QIXIS Timing parameters for IFC CS3 */
 275 #define CONFIG_SYS_CS3_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 276                                         FTIM0_GPCM_TEADC(0x0e) | \
 277                                         FTIM0_GPCM_TEAHC(0x0e))
 278 #define CONFIG_SYS_CS3_FTIM1            (FTIM1_GPCM_TACO(0x0e) | \
 279                                         FTIM1_GPCM_TRAD(0x1f))
 280 #define CONFIG_SYS_CS3_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
 281                                         FTIM2_GPCM_TCH(0x0) | \
 282                                         FTIM2_GPCM_TWP(0x1f))
 283 #define CONFIG_SYS_CS3_FTIM3            0x0
 284
 285 /* NAND Flash on IFC */
 286 #define CONFIG_NAND_FSL_IFC
 287 #define CONFIG_SYS_NAND_BASE            0xff800000
 288 #ifdef CONFIG_PHYS_64BIT
 289 #define CONFIG_SYS_NAND_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_NAND_BASE)
 290 #else
 291 #define CONFIG_SYS_NAND_BASE_PHYS       CONFIG_SYS_NAND_BASE
 292 #endif
 293
 294 #define CONFIG_SYS_NAND_CSPR_EXT        (0xf)
 295 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 296                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
 297                                 | CSPR_MSEL_NAND        /* MSEL = NAND */ \
 298                                 | CSPR_V)
 299 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64 * 1024)
 300
 301 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 302                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 303                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 304                                 | CSOR_NAND_RAL_3       /* RAL = 2Byes */ \
 305                                 | CSOR_NAND_PGS_2K      /* Page Size = 2K */ \
 306                                 | CSOR_NAND_SPRZ_64/* Spare size = 64 */ \
 307                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
 308
 309 #define CONFIG_SYS_NAND_ONFI_DETECTION
 310
 311 /* ONFI NAND Flash mode0 Timing Params */
 312 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x07) | \
 313                                         FTIM0_NAND_TWP(0x18)   | \
 314                                         FTIM0_NAND_TWCHT(0x07) | \
 315                                         FTIM0_NAND_TWH(0x0a))
 316 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
 317                                         FTIM1_NAND_TWBE(0x39)  | \
 318                                         FTIM1_NAND_TRR(0x0e)   | \
 319                                         FTIM1_NAND_TRP(0x18))
 320 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x0f) | \
 321                                         FTIM2_NAND_TREH(0x0a) | \
 322                                         FTIM2_NAND_TWHRE(0x1e))
 323 #define CONFIG_SYS_NAND_FTIM3           0x0
 324
 325 #define CONFIG_SYS_NAND_DDR_LAW         11
 326
 327 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 328 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 329 #define CONFIG_MTD_NAND_VERIFY_WRITE
 330 #define CONFIG_CMD_NAND
 331
 332 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
 333
 334 #if defined(CONFIG_NAND)
 335 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
 336 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 337 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 338 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 339 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 340 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 341 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 342 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 343 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 344 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NOR0_CSPR
 345 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NOR_AMASK
 346 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NOR_CSOR
 347 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NOR_FTIM0
 348 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NOR_FTIM1
 349 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NOR_FTIM2
 350 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NOR_FTIM3
 351 #else
 352 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 353 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR
 354 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 355 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 356 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 357 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 358 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 359 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 360 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NAND_CSPR_EXT
 361 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NAND_CSPR
 362 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NAND_AMASK
 363 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NAND_CSOR
 364 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NAND_FTIM0
 365 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NAND_FTIM1
 366 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NAND_FTIM2
 367 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NAND_FTIM3
 368 #endif
 369 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR1_CSPR_EXT
 370 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR1_CSPR
 371 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 372 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 373 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 374 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 375 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 376 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 377
 378 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_TEXT_BASE
 379
 380 #if defined(CONFIG_RAMBOOT_PBL)
 381 #define CONFIG_SYS_RAMBOOT
 382 #endif
 383
 384 #define CONFIG_BOARD_EARLY_INIT_R
 385 #define CONFIG_MISC_INIT_R
 386
 387 #define CONFIG_HWCONFIG
 388
 389 /* define to use L1 as initial stack */
 390 #define CONFIG_L1_INIT_RAM
 391 #define CONFIG_SYS_INIT_RAM_LOCK
 392 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000      /* Initial L1 address */
 393 #ifdef CONFIG_PHYS_64BIT
 394 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH      0xf
 395 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW       0xfe0ec000
 396 /* The assembler doesn't like typecast */
 397 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 398         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 399           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 400 #else
 401 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS   0xfe0ec000 /* Initial L1 address */
 402 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0
 403 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS
 404 #endif
 405 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000
 406
 407 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 408                                         GENERATED_GBL_DATA_SIZE)
 409 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 410
 411 #define CONFIG_SYS_MONITOR_LEN          (512 * 1024)
 412 #define CONFIG_SYS_MALLOC_LEN           (4 * 1024 * 1024)
 413
 414 /* Serial Port - controlled on board with jumper J8
 415  * open - index 2
 416  * shorted - index 1
 417  */
 418 #define CONFIG_CONS_INDEX       1
 419 #define CONFIG_SYS_NS16550
 420 #define CONFIG_SYS_NS16550_SERIAL
 421 #define CONFIG_SYS_NS16550_REG_SIZE     1
 422 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 423
 424 #define CONFIG_SYS_BAUDRATE_TABLE       \
 425         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 426
 427 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 428 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 429 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 430 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 431 #define CONFIG_SERIAL_MULTI             /* Enable both serial ports */
 432 #define CONFIG_SYS_CONSOLE_IS_IN_ENV    /* determine from environment */
 433
 434
 435 /* Use the HUSH parser */
 436 #define CONFIG_SYS_HUSH_PARSER
 437 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 438
 439 /* pass open firmware flat tree */
 440 #define CONFIG_OF_LIBFDT
 441 #define CONFIG_OF_BOARD_SETUP
 442 #define CONFIG_OF_STDOUT_VIA_ALIAS
 443
 444 /* new uImage format support */
 445 #define CONFIG_FIT
 446 #define CONFIG_FIT_VERBOSE      /* enable fit_format_{error,warning}() */
 447
 448 /* I2C */
 449 #define CONFIG_FSL_I2C          /* Use FSL common I2C driver */
 450 #define CONFIG_HARD_I2C         /* I2C with hardware support */
 451 #define CONFIG_I2C_MULTI_BUS
 452 #define CONFIG_I2C_CMD_TREE
 453 #define CONFIG_SYS_I2C_SPEED            400000  /* I2C speed in Hz */
 454 #define CONFIG_SYS_I2C_SLAVE            0x7F
 455 #define CONFIG_SYS_I2C_OFFSET           0x118000
 456 #define CONFIG_SYS_I2C2_OFFSET          0x119000
 457
 458 /*
 459  * RTC configuration
 460  */
 461 #define RTC
 462 #define CONFIG_RTC_DS3231               1
 463 #define CONFIG_SYS_I2C_RTC_ADDR         0x68
 464
 465 /*
 466  * RapidIO
 467  */
 468 #ifdef CONFIG_SYS_SRIO
 469 #ifdef CONFIG_SRIO1
 470 #define CONFIG_SYS_SRIO1_MEM_VIRT       0xa0000000
 471 #ifdef CONFIG_PHYS_64BIT
 472 #define CONFIG_SYS_SRIO1_MEM_PHYS       0xc20000000ull
 473 #else
 474 #define CONFIG_SYS_SRIO1_MEM_PHYS       0xa0000000
 475 #endif
 476 #define CONFIG_SYS_SRIO1_MEM_SIZE       0x10000000      /* 256M */
 477 #endif
 478
 479 #ifdef CONFIG_SRIO2
 480 #define CONFIG_SYS_SRIO2_MEM_VIRT       0xb0000000
 481 #ifdef CONFIG_PHYS_64BIT
 482 #define CONFIG_SYS_SRIO2_MEM_PHYS       0xc30000000ull
 483 #else
 484 #define CONFIG_SYS_SRIO2_MEM_PHYS       0xb0000000
 485 #endif
 486 #define CONFIG_SYS_SRIO2_MEM_SIZE       0x10000000      /* 256M */
 487 #endif
 488 #endif
 489
 490 /*
 491  * for slave u-boot IMAGE instored in master memory space,
 492  * PHYS must be aligned based on the SIZE
 493  */
 494 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef080000ull
 495 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff80000ull
 496 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x80000        /* 512K */
 497 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff80000ull
 498 /*
 499  * for slave UCODE and ENV instored in master memory space,
 500  * PHYS must be aligned based on the SIZE
 501  */
 502 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef040000ull
 503 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull
 504 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE 0x40000    /* 256K */
 505
 506 /* slave core release by master*/
 507 #define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4
 508 #define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */
 509
 510 /*
 511  * SRIO_PCIE_BOOT - SLAVE
 512  */
 513 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
 514 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000
 515 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \
 516                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR)
 517 #endif
 518
 519 /*
 520  * eSPI - Enhanced SPI
 521  */
 522 #define CONFIG_FSL_ESPI
 523 #define CONFIG_SPI_FLASH
 524 #define CONFIG_SPI_FLASH_SST
 525 #define CONFIG_CMD_SF
 526 #define CONFIG_SF_DEFAULT_SPEED         10000000
 527 #define CONFIG_SF_DEFAULT_MODE          0
 528
 529 /*
 530  * MAPLE
 531  */
 532 #ifdef CONFIG_PHYS_64BIT
 533 #define CONFIG_SYS_MAPLE_MEM_PHYS      0xFA0000000ull
 534 #else
 535 #define CONFIG_SYS_MAPLE_MEM_PHYS      0xA0000000
 536 #endif
 537
 538 /*
 539  * General PCI
 540  * Memory space is mapped 1-1, but I/O space must start from 0.
 541  */
 542
 543 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 544 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 545 #ifdef CONFIG_PHYS_64BIT
 546 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
 547 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 548 #else
 549 #define CONFIG_SYS_PCIE1_MEM_BUS        0x80000000
 550 #define CONFIG_SYS_PCIE1_MEM_PHYS       0x80000000
 551 #endif
 552 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x20000000      /* 512M */
 553 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 554 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 555 #ifdef CONFIG_PHYS_64BIT
 556 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 557 #else
 558 #define CONFIG_SYS_PCIE1_IO_PHYS        0xf8000000
 559 #endif
 560 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 561
 562 /* Qman/Bman */
 563 #ifndef CONFIG_NOBQFMAN
 564 #define CONFIG_SYS_DPAA_QBMAN           /* Support Q/Bman */
 565 #define CONFIG_SYS_BMAN_NUM_PORTALS     25
 566 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 567 #ifdef CONFIG_PHYS_64BIT
 568 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 569 #else
 570 #define CONFIG_SYS_BMAN_MEM_PHYS        CONFIG_SYS_BMAN_MEM_BASE
 571 #endif
 572 #define CONFIG_SYS_BMAN_MEM_SIZE        0x02000000
 573 #define CONFIG_SYS_QMAN_NUM_PORTALS     25
 574 #define CONFIG_SYS_QMAN_MEM_BASE        0xf6000000
 575 #ifdef CONFIG_PHYS_64BIT
 576 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff6000000ull
 577 #else
 578 #define CONFIG_SYS_QMAN_MEM_PHYS        CONFIG_SYS_QMAN_MEM_BASE
 579 #endif
 580 #define CONFIG_SYS_QMAN_MEM_SIZE        0x02000000
 581
 582 #define CONFIG_SYS_DPAA_FMAN
 583
 584 /* Default address of microcode for the Linux Fman driver */
 585 #if defined(CONFIG_SPIFLASH)
 586 /*
 587  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
 588  * env, so we got 0x110000.
 589  */
 590 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
 591 #define CONFIG_SYS_QE_FMAN_FW_ADDR      0x110000
 592 #elif defined(CONFIG_SDCARD)
 593 /*
 594  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 595  * about 545KB (1089 blocks), Env is stored after the image, and the env size is
 596  * 0x2000 (16 blocks), 8 + 1089 + 16 = 1113, enlarge it to 1130.
 597  */
 598 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
 599 #define CONFIG_SYS_QE_FMAN_FW_ADDR      (512 * 1130)
 600 #elif defined(CONFIG_NAND)
 601 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
 602 #define CONFIG_SYS_QE_FMAN_FW_ADDR      (6 * CONFIG_SYS_NAND_BLOCK_SIZE)
 603 #else
 604 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 605 #define CONFIG_SYS_QE_FMAN_FW_ADDR              0xEFF40000
 606 #endif
 607 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 608 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 609 #endif /* CONFIG_NOBQFMAN */
 610
 611 #ifdef CONFIG_SYS_DPAA_FMAN
 612 #define CONFIG_FMAN_ENET
 613 #define CONFIG_PHYLIB_10G
 614 #define CONFIG_PHY_VITESSE
 615 #define CONFIG_PHY_TERANETICS
 616 #define SGMII_CARD_PORT1_PHY_ADDR 0x1C
 617 #define SGMII_CARD_PORT2_PHY_ADDR 0x10
 618 #define SGMII_CARD_PORT3_PHY_ADDR 0x1E
 619 #define SGMII_CARD_PORT4_PHY_ADDR 0x11
 620 #endif
 621
 622 #ifdef CONFIG_PCI
 623 #define CONFIG_PCI_INDIRECT_BRIDGE
 624 #define CONFIG_NET_MULTI
 625 #define CONFIG_PCI_PNP                  /* do pci plug-and-play */
 626 #define CONFIG_E1000
 627
 628 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 629 #define CONFIG_DOS_PARTITION
 630 #endif  /* CONFIG_PCI */
 631
 632 #ifdef CONFIG_FMAN_ENET
 633 #define CONFIG_SYS_FM1_DTSEC5_PHY_ADDR  0x10
 634 #define CONFIG_SYS_FM1_DTSEC6_PHY_ADDR  0x11
 635
 636 /*B4860 QDS AMC2PEX-2S default PHY_ADDR */
 637 #define CONFIG_SYS_FM1_10GEC1_PHY_ADDR 0x7       /*SLOT 1*/
 638 #define CONFIG_SYS_FM1_10GEC2_PHY_ADDR 0x6       /*SLOT 2*/
 639
 640
 641 #define CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR    0x1c
 642 #define CONFIG_SYS_FM1_DTSEC2_RISER_PHY_ADDR    0x1d
 643 #define CONFIG_SYS_FM1_DTSEC3_RISER_PHY_ADDR    0x1e
 644 #define CONFIG_SYS_FM1_DTSEC4_RISER_PHY_ADDR    0x1f
 645
 646 #define CONFIG_MII              /* MII PHY management */
 647 #define CONFIG_ETHPRIME         "FM1@DTSEC1"
 648 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
 649 #endif
 650
 651 /*
 652  * Environment
 653  */
 654 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 655 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 656
 657 /*
 658  * Command line configuration.
 659  */
 660 #include <config_cmd_default.h>
 661
 662 #define CONFIG_CMD_DATE
 663 #define CONFIG_CMD_DHCP
 664 #define CONFIG_CMD_EEPROM
 665 #define CONFIG_CMD_ELF
 666 #define CONFIG_CMD_ERRATA
 667 #define CONFIG_CMD_GREPENV
 668 #define CONFIG_CMD_IRQ
 669 #define CONFIG_CMD_I2C
 670 #define CONFIG_CMD_MII
 671 #define CONFIG_CMD_PING
 672 #define CONFIG_CMD_REGINFO
 673 #define CONFIG_CMD_SETEXPR
 674
 675 #ifdef CONFIG_PCI
 676 #define CONFIG_CMD_PCI
 677 #define CONFIG_CMD_NET
 678 #endif
 679
 680 /*
 681 * USB
 682 */
 683 #define CONFIG_HAS_FSL_DR_USB
 684
 685 #ifdef CONFIG_HAS_FSL_DR_USB
 686 #define CONFIG_USB_EHCI
 687
 688 #ifdef CONFIG_USB_EHCI
 689 #define CONFIG_CMD_USB
 690 #define CONFIG_USB_STORAGE
 691 #define CONFIG_USB_EHCI_FSL
 692 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 693 #define CONFIG_CMD_EXT2
 694 #endif
 695 #endif
 696
 697 /*
 698  * Miscellaneous configurable options
 699  */
 700 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 701 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
 702 #define CONFIG_AUTO_COMPLETE                    /* add autocompletion support */
 703 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 704 #define CONFIG_SYS_PROMPT       "=> "           /* Monitor Command Prompt */
 705 #ifdef CONFIG_CMD_KGDB
 706 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
 707 #else
 708 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 709 #endif
 710 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 711 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
 712 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
 713 #define CONFIG_SYS_HZ           1000            /* decrementer freq: 1ms ticks*/
 714
 715 /*
 716  * For booting Linux, the board info and command line data
 717  * have to be in the first 64 MB of memory, since this is
 718  * the maximum mapped by the Linux kernel during initialization.
 719  */
 720 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial map for Linux*/
 721 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 722
 723 #ifdef CONFIG_CMD_KGDB
 724 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 725 #define CONFIG_KGDB_SER_INDEX   2       /* which serial port to use */
 726 #endif
 727
 728 /*
 729  * Environment Configuration
 730  */
 731 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 732 #define CONFIG_BOOTFILE         "uImage"
 733 #define CONFIG_UBOOTPATH        "u-boot.bin"    /* U-Boot image on TFTP server*/
 734
 735 /* default location for tftp and bootm */
 736 #define CONFIG_LOADADDR         1000000
 737
 738 #define CONFIG_BOOTDELAY        10      /* -1 disables auto-boot */
 739
 740 #define CONFIG_BAUDRATE 115200
 741
 742 #define __USB_PHY_TYPE  ulpi
 743
 744 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 745         "hwconfig=fsl_ddr:ctlr_intlv=null,"             \
 746         "bank_intlv=cs0_cs1;"                                   \
 747         "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
 748         "netdev=eth0\0"                                         \
 749         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"                     \
 750         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"                     \
 751         "tftpflash=tftpboot $loadaddr $uboot && "               \
 752         "protect off $ubootaddr +$filesize && "                 \
 753         "erase $ubootaddr +$filesize && "                       \
 754         "cp.b $loadaddr $ubootaddr $filesize && "               \
 755         "protect on $ubootaddr +$filesize && "                  \
 756         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 757         "consoledev=ttyS0\0"                                    \
 758         "ramdiskaddr=2000000\0"                                 \
 759         "ramdiskfile=b4860qds/ramdisk.uboot\0"                  \
 760         "fdtaddr=c00000\0"                                      \
 761         "fdtfile=b4860qds/b4860qds.dtb\0"                               \
 762         "bdev=sda3\0"                                           \
 763         "c=ffe\0"
 764
 765 /* For emulation this causes u-boot to jump to the start of the proof point
 766    app code automatically */
 767 #define CONFIG_PROOF_POINTS                     \
 768  "setenv bootargs root=/dev/$bdev rw "          \
 769  "console=$consoledev,$baudrate $othbootargs;"  \
 770  "cpu 1 release 0x29000000 - - -;"              \
 771  "cpu 2 release 0x29000000 - - -;"              \
 772  "cpu 3 release 0x29000000 - - -;"              \
 773  "cpu 4 release 0x29000000 - - -;"              \
 774  "cpu 5 release 0x29000000 - - -;"              \
 775  "cpu 6 release 0x29000000 - - -;"              \
 776  "cpu 7 release 0x29000000 - - -;"              \
 777  "go 0x29000000"
 778
 779 #define CONFIG_HVBOOT   \
 780  "setenv bootargs config-addr=0x60000000; "     \
 781  "bootm 0x01000000 - 0x00f00000"
 782
 783 #define CONFIG_ALU                              \
 784  "setenv bootargs root=/dev/$bdev rw "          \
 785  "console=$consoledev,$baudrate $othbootargs;"  \
 786  "cpu 1 release 0x01000000 - - -;"              \
 787  "cpu 2 release 0x01000000 - - -;"              \
 788  "cpu 3 release 0x01000000 - - -;"              \
 789  "cpu 4 release 0x01000000 - - -;"              \
 790  "cpu 5 release 0x01000000 - - -;"              \
 791  "cpu 6 release 0x01000000 - - -;"              \
 792  "cpu 7 release 0x01000000 - - -;"              \
 793  "go 0x01000000"
 794
 795 #define CONFIG_LINUX                            \
 796  "setenv bootargs root=/dev/ram rw "            \
 797  "console=$consoledev,$baudrate $othbootargs;"  \
 798  "setenv ramdiskaddr 0x02000000;"               \
 799  "setenv fdtaddr 0x00c00000;"                   \
 800  "setenv loadaddr 0x1000000;"                   \
 801  "bootm $loadaddr $ramdiskaddr $fdtaddr"
 802
 803 #define CONFIG_HDBOOT                                   \
 804         "setenv bootargs root=/dev/$bdev rw "           \
 805         "console=$consoledev,$baudrate $othbootargs;"   \
 806         "tftp $loadaddr $bootfile;"                     \
 807         "tftp $fdtaddr $fdtfile;"                       \
 808         "bootm $loadaddr - $fdtaddr"
 809
 810 #define CONFIG_NFSBOOTCOMMAND                   \
 811         "setenv bootargs root=/dev/nfs rw "     \
 812         "nfsroot=$serverip:$rootpath "          \
 813         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 814         "console=$consoledev,$baudrate $othbootargs;"   \
 815         "tftp $loadaddr $bootfile;"             \
 816         "tftp $fdtaddr $fdtfile;"               \
 817         "bootm $loadaddr - $fdtaddr"
 818
 819 #define CONFIG_RAMBOOTCOMMAND                           \
 820         "setenv bootargs root=/dev/ram rw "             \
 821         "console=$consoledev,$baudrate $othbootargs;"   \
 822         "tftp $ramdiskaddr $ramdiskfile;"               \
 823         "tftp $loadaddr $bootfile;"                     \
 824         "tftp $fdtaddr $fdtfile;"                       \
 825         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 826
 827 #define CONFIG_BOOTCOMMAND              CONFIG_LINUX
 828
 829 #ifdef CONFIG_SECURE_BOOT
 830 #include <asm/fsl_secure_boot.h>
 831 #endif
 832
 833 #endif  /* __CONFIG_H */