include/configs/CPCIISER4.h

   1 /*
   2  * (C) Copyright 2001-2003
   3  * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
   4  *
   5  * See file CREDITS for list of people who contributed to this
   6  * project.
   7  *
   8  * This program is free software; you can redistribute it and/or
   9  * modify it under the terms of the GNU General Public License as
  10  * published by the Free Software Foundation; either version 2 of
  11  * the License, or (at your option) any later version.
  12  *
  13  * This program is distributed in the hope that it will be useful,
  14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  16  * GNU General Public License for more details.
  17  *
  18  * You should have received a copy of the GNU General Public License
  19  * along with this program; if not, write to the Free Software
  20  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  21  * MA 02111-1307 USA
  22  */
  23
  24 /*
  25  * board/config.h - configuration options, board specific
  26  */
  27
  28 #ifndef __CONFIG_H
  29 #define __CONFIG_H
  30
  31 /*
  32  * High Level Configuration Options
  33  * (easy to change)
  34  */
  35
  36 #define CONFIG_405GP            1       /* This is a PPC405 CPU         */
  37 #define CONFIG_4xx              1       /* ...member of PPC4xx family   */
  38 #define CONFIG_CPCIISER4        1       /* ...on a CPCIISER4 board      */
  39
  40 #define CONFIG_BOARD_EARLY_INIT_F 1     /* call board_early_init_f()    */
  41
  42 #define CONFIG_SYS_CLK_FREQ     25000000 /* external frequency to pll   */
  43
  44 #define CONFIG_BAUDRATE         9600
  45 #define CONFIG_BOOTDELAY        3       /* autoboot after 3 seconds     */
  46
  47 #undef  CONFIG_BOOTARGS
  48 #define CONFIG_BOOTCOMMAND      "bootm fff00000"
  49
  50 #define CONFIG_LOADS_ECHO       1       /* echo on for serial download  */
  51 #define CONFIG_SYS_LOADS_BAUD_CHANGE    1       /* allow baudrate change        */
  52
  53 #define CONFIG_MII              1       /* MII PHY management           */
  54 #define CONFIG_PHY_ADDR         0       /* PHY address                  */
  55 #define CONFIG_LXT971_NO_SLEEP  1       /* disable sleep mode in LXT971 */
  56
  57
  58 /*
  59  * BOOTP options
  60  */
  61 #define CONFIG_BOOTP_BOOTFILESIZE
  62 #define CONFIG_BOOTP_BOOTPATH
  63 #define CONFIG_BOOTP_GATEWAY
  64 #define CONFIG_BOOTP_HOSTNAME
  65
  66
  67 /*
  68  * BOOTP options
  69  */
  70 #define CONFIG_BOOTP_BOOTFILESIZE
  71 #define CONFIG_BOOTP_BOOTPATH
  72 #define CONFIG_BOOTP_GATEWAY
  73 #define CONFIG_BOOTP_HOSTNAME
  74
  75
  76 /*
  77  * Command line configuration.
  78  */
  79 #include <config_cmd_default.h>
  80
  81 #define CONFIG_CMD_PCI
  82 #define CONFIG_CMD_IRQ
  83 #define CONFIG_CMD_MII
  84 #define CONFIG_CMD_ELF
  85 #define CONFIG_CMD_EEPROM
  86
  87
  88 #undef CONFIG_WATCHDOG                  /* watchdog disabled            */
  89
  90 #define CONFIG_SDRAM_BANK0      1       /* init onboard SDRAM bank 0    */
  91
  92 /*
  93  * Miscellaneous configurable options
  94  */
  95 #define CONFIG_SYS_LONGHELP                     /* undef to save memory         */
  96 #define CONFIG_SYS_PROMPT       "=> "           /* Monitor Command Prompt       */
  97 #if defined(CONFIG_CMD_KGDB)
  98 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size      */
  99 #else
 100 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size      */
 101 #endif
 102 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
 103 #define CONFIG_SYS_MAXARGS      16              /* max number of command args   */
 104 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size    */
 105
 106 #define CONFIG_SYS_CONSOLE_INFO_QUIET   1       /* don't print console @ startup*/
 107
 108 #define CONFIG_SYS_MEMTEST_START        0x0400000       /* memtest works on     */
 109 #define CONFIG_SYS_MEMTEST_END          0x0C00000       /* 4 ... 12 MB in DRAM  */
 110
 111 #define CONFIG_SYS_EXT_SERIAL_CLOCK     1843200  /* use external serial clock   */
 112
 113 /* The following table includes the supported baudrates */
 114 #define CONFIG_SYS_BAUDRATE_TABLE       \
 115         { 300, 600, 1200, 2400, 4800, 9600, 19200, 38400,     \
 116          57600, 115200, 230400, 460800, 921600 }
 117
 118 #define CONFIG_SYS_LOAD_ADDR    0x100000        /* default load address */
 119 #define CONFIG_SYS_EXTBDINFO    1               /* To use extended board_into (bd_t) */
 120
 121 #define CONFIG_SYS_HZ           1000            /* decrementer freq: 1 ms ticks */
 122
 123 #define CONFIG_ZERO_BOOTDELAY_CHECK     /* check for keypress on bootdelay==0 */
 124
 125 /*-----------------------------------------------------------------------
 126  * PCI stuff
 127  *-----------------------------------------------------------------------
 128  */
 129 #define PCI_HOST_ADAPTER 0              /* configure ar pci adapter     */
 130 #define PCI_HOST_FORCE  1               /* configure as pci host        */
 131 #define PCI_HOST_AUTO   2               /* detected via arbiter enable  */
 132
 133 #define CONFIG_PCI                      /* include pci support          */
 134 #define CONFIG_PCI_HOST PCI_HOST_AUTO   /* select pci host function     */
 135 #define CONFIG_PCI_PNP                  /* do pci plug-and-play         */
 136                                         /* resource configuration       */
 137
 138 #define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x12FE   /* PCI Vendor ID: esd gmbh      */
 139 #define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0x0404   /* PCI Device ID: CPCI-ISER4    */
 140 #define CONFIG_SYS_PCI_PTM1LA   0x00000000      /* point to sdram               */
 141 #define CONFIG_SYS_PCI_PTM1MS   0xff000001      /* 16MB, enable hard-wired to 1 */
 142 #define CONFIG_SYS_PCI_PTM1PCI 0x00000000       /* Host: use this pci address   */
 143 #define CONFIG_SYS_PCI_PTM2LA   0xffe00000      /* point to flash               */
 144 #define CONFIG_SYS_PCI_PTM2MS   0xffe00001      /* 2MB, enable                  */
 145 #define CONFIG_SYS_PCI_PTM2PCI 0x04000000       /* Host: use this pci address   */
 146
 147 /*-----------------------------------------------------------------------
 148  * Start addresses for the final memory configuration
 149  * (Set up by the startup code)
 150  * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
 151  */
 152 #define CONFIG_SYS_SDRAM_BASE           0x00000000
 153 #define CONFIG_SYS_FLASH_BASE           0xFFFC0000
 154 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
 155 #define CONFIG_SYS_MONITOR_LEN          (256 * 1024)    /* Reserve 256 kB for Monitor   */
 156 #define CONFIG_SYS_MALLOC_LEN           (128 * 1024)    /* Reserve 128 kB for malloc()  */
 157
 158 /*
 159  * For booting Linux, the board info and command line data
 160  * have to be in the first 8 MB of memory, since this is
 161  * the maximum mapped by the Linux kernel during initialization.
 162  */
 163 #define CONFIG_SYS_BOOTMAPSZ            (8 << 20)       /* Initial Memory map for Linux */
 164 /*-----------------------------------------------------------------------
 165  * FLASH organization
 166  */
 167 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* max number of memory banks           */
 168 #define CONFIG_SYS_MAX_FLASH_SECT       256     /* max number of sectors on one chip    */
 169
 170 #define CONFIG_SYS_FLASH_ERASE_TOUT     120000  /* Timeout for Flash Erase (in ms)      */
 171 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Timeout for Flash Write (in ms)      */
 172
 173 #define CONFIG_SYS_FLASH_WORD_SIZE      unsigned short  /* flash word size (width)      */
 174 #define CONFIG_SYS_FLASH_ADDR0          0x5555  /* 1st address for flash config cycles  */
 175 #define CONFIG_SYS_FLASH_ADDR1          0x2AAA  /* 2nd address for flash config cycles  */
 176 /*
 177  * The following defines are added for buggy IOP480 byte interface.
 178  * All other boards should use the standard values (CPCI405 etc.)
 179  */
 180 #define CONFIG_SYS_FLASH_READ0          0x0000  /* 0 is standard                        */
 181 #define CONFIG_SYS_FLASH_READ1          0x0001  /* 1 is standard                        */
 182 #define CONFIG_SYS_FLASH_READ2          0x0002  /* 2 is standard                        */
 183
 184 #define CONFIG_SYS_FLASH_EMPTY_INFO             /* print 'E' for empty sector on flinfo */
 185
 186 /*-----------------------------------------------------------------------
 187  * I2C EEPROM (CAT24WC08) for environment
 188  */
 189 #define CONFIG_HARD_I2C                 /* I2C with hardware support */
 190 #define CONFIG_SYS_I2C_SPEED            400000  /* I2C speed and slave address */
 191 #define CONFIG_SYS_I2C_SLAVE            0x7F
 192
 193 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x50    /* EEPROM CAT28WC08             */
 194 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1        /* Bytes of address             */
 195 /* mask of address bits that overflow into the "EEPROM chip address"    */
 196 #define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW     0x07
 197 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4     /* The Catalyst CAT24WC08 has   */
 198                                         /* 16 byte page write mode using*/
 199                                         /* last 4 bits of the address   */
 200 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS   10   /* and takes up to 10 msec */
 201
 202 #define CONFIG_ENV_IS_IN_EEPROM 1       /* use EEPROM for environment vars */
 203 #define CONFIG_ENV_OFFSET               0x000   /* environment starts at the beginning of the EEPROM */
 204 #define CONFIG_ENV_SIZE         0x300   /* 768 bytes may be used for env vars */
 205                                    /* total size of a CAT24WC08 is 1024 bytes */
 206
 207 /*
 208  * Init Memory Controller:
 209  *
 210  * BR0/1 and OR0/1 (FLASH)
 211  */
 212
 213 #define FLASH_BASE0_PRELIM      0xFFF00000      /* FLASH bank #0        */
 214 #define FLASH_BASE1_PRELIM      0               /* FLASH bank #1        */
 215
 216 /*-----------------------------------------------------------------------
 217  * External Bus Controller (EBC) Setup
 218  */
 219
 220 /* Memory Bank 0 (Flash Bank 0) initialization                                  */
 221 #define CONFIG_SYS_EBC_PB0AP            0x92015480
 222 #define CONFIG_SYS_EBC_PB0CR            0xFFC5A000  /* BAS=0xFFC,BS=4MB,BU=R/W,BW=16bit */
 223
 224 /* Memory Bank 1 (Uart 8bit) initialization                                     */
 225 #define CONFIG_SYS_EBC_PB1AP            0x01000480  /* TWT=2,TH=2,no Ready,BEM=0,SOR=1  */
 226 #define CONFIG_SYS_EBC_PB1CR            0xF0018000  /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit  */
 227
 228 /* Memory Bank 2 (Uart 32bit) initialization                                    */
 229 #define CONFIG_SYS_EBC_PB2AP            0x000004c0  /* no Ready, BEM=1                  */
 230 #define CONFIG_SYS_EBC_PB2CR            0xF011C000  /* BAS=0xF01,BS=1MB,BU=R/W,BW=32bit */
 231
 232 /* Memory Bank 3 (FPGA Reset) initialization                                    */
 233 #define CONFIG_SYS_EBC_PB3AP            0x010004C0  /* no Ready, BEM=1                  */
 234 #define CONFIG_SYS_EBC_PB3CR            0xF021A000  /* BAS=0xF02,BS=1MB,BU=R/W,BW=16bit */
 235
 236 /*-----------------------------------------------------------------------
 237  * Definitions for initial stack pointer and data area (in DPRAM)
 238  */
 239 #define CONFIG_SYS_INIT_DCACHE_CS       7       /* use cs # 7 for data cache memory    */
 240 #define CONFIG_SYS_INIT_RAM_ADDR        0x40000000  /* use data cache                  */
 241 #define CONFIG_SYS_INIT_RAM_END 0x2000  /* End of used area in RAM             */
 242 #define CONFIG_SYS_GBL_DATA_SIZE      128  /* size in bytes reserved for initial data */
 243 #define CONFIG_SYS_GBL_DATA_OFFSET    (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
 244 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 245
 246 /*
 247  * Internal Definitions
 248  *
 249  * Boot Flags
 250  */
 251 #define BOOTFLAG_COLD   0x01            /* Normal Power-On: Boot from FLASH     */
 252 #define BOOTFLAG_WARM   0x02            /* Software reboot                      */
 253
 254 #endif  /* __CONFIG_H */