include/configs/DU440.h

   1 /*
   2  * (C) Copyright 2008
   3  * Matthias Fuchs, esd gmbh, matthias.fuchs@esd-electronics.com
   4  *
   5  * based on the Sequoia board configuration by
   6  * Stefan Roese, Jacqueline Pira-Ferriol and Alain Saurel
   7  *
   8  * This program is free software; you can redistribute it and/or
   9  * modify it under the terms of the GNU General Public License as
  10  * published by the Free Software Foundation; either version 2 of
  11  * the License, or (at your option) any later version.
  12  *
  13  * This program is distributed in the hope that it will be useful,
  14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  16  * GNU General Public License for more details.
  17  *
  18  * You should have received a copy of the GNU General Public License
  19  * along with this program; if not, write to the Free Software
  20  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  21  * MA 02111-1307 USA
  22  */
  23
  24 /*
  25  **********************************************************************
  26  * DU440.h - configuration for esd's DU440 board (Power PC440EPx)
  27  **********************************************************************
  28  */
  29 #ifndef __CONFIG_H
  30 #define __CONFIG_H
  31
  32 /*
  33  * High Level Configuration Options
  34  */
  35 #define CONFIG_DU440            1               /* Board is esd DU440   */
  36 #define CONFIG_440EPX           1               /* Specific PPC440EPx   */
  37 #define CONFIG_4xx              1               /* ... PPC4xx family    */
  38 #define CONFIG_SYS_CLK_FREQ     33333400        /* external freq to pll */
  39
  40 #define CONFIG_BOARD_EARLY_INIT_F 1             /* Call board_early_init_f */
  41 #define CONFIG_MISC_INIT_R      1               /* Call misc_init_r     */
  42 #define CONFIG_LAST_STAGE_INIT  1               /* last_stage_init      */
  43
  44 /*
  45  * Base addresses -- Note these are effective addresses where the
  46  * actual resources get mapped (not physical addresses)
  47  */
  48 #define CFG_MONITOR_LEN         (384 * 1024)    /* Reserve 384 kB for Monitor */
  49 #define CFG_MALLOC_LEN          (8 << 20)       /* Reserve 8 MB for malloc()  */
  50
  51 #define CFG_BOOT_BASE_ADDR      0xf0000000
  52 #define CFG_SDRAM_BASE          0x00000000      /* _must_ be 0          */
  53 #define CFG_FLASH_BASE          0xfc000000      /* start of FLASH       */
  54 #define CFG_MONITOR_BASE        TEXT_BASE
  55 #define CFG_NAND0_ADDR          0xd0000000      /* NAND Flash           */
  56 #define CFG_NAND1_ADDR          0xd0100000      /* NAND Flash           */
  57 #define CFG_OCM_BASE            0xe0010000      /* ocm                  */
  58 #define CFG_PCI_BASE            0xe0000000      /* Internal PCI regs    */
  59 #define CFG_PCI_MEMBASE         0x80000000      /* mapped pci memory    */
  60 #define CFG_PCI_MEMBASE1        CFG_PCI_MEMBASE  + 0x10000000
  61 #define CFG_PCI_MEMBASE2        CFG_PCI_MEMBASE1 + 0x10000000
  62 #define CFG_PCI_MEMBASE3        CFG_PCI_MEMBASE2 + 0x10000000
  63 #define CFG_PCI_IOBASE          0xe8000000
  64
  65
  66 /* Don't change either of these */
  67 #define CFG_PERIPHERAL_BASE     0xef600000      /* internal peripherals */
  68
  69 #define CFG_USB2D0_BASE         0xe0000100
  70 #define CFG_USB_DEVICE          0xe0000000
  71 #define CFG_USB_HOST            0xe0000400
  72
  73 /*
  74  * Initial RAM & stack pointer
  75  */
  76 /* 440EPx/440GRx have 16KB of internal SRAM, so no need for D-Cache     */
  77 #define CFG_INIT_RAM_OCM        1               /* OCM as init ram      */
  78 #define CFG_INIT_RAM_ADDR       CFG_OCM_BASE    /* OCM                  */
  79
  80 #define CFG_INIT_RAM_END        (4 << 10)
  81 #define CFG_GBL_DATA_SIZE       256             /* num bytes initial data */
  82 #define CFG_GBL_DATA_OFFSET     (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
  83 #define CFG_INIT_SP_OFFSET      CFG_GBL_DATA_OFFSET
  84
  85 /*
  86  * Serial Port
  87  */
  88 /* TODO: external clock oscillator will be removed */
  89 #define CFG_EXT_SERIAL_CLOCK    11059200        /* ext. 11.059MHz clk   */
  90 #define CONFIG_BAUDRATE         115200
  91 #define CONFIG_SERIAL_MULTI     1
  92 #undef CONFIG_UART1_CONSOLE
  93
  94 #define CFG_BAUDRATE_TABLE                                              \
  95         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
  96
  97 /*
  98  * Video Port
  99  */
 100 #define CONFIG_VIDEO
 101 #define CONFIG_VIDEO_SMI_LYNXEM
 102 #define CONFIG_CFB_CONSOLE
 103 #define CONFIG_VIDEO_LOGO
 104 #define CONFIG_VGA_AS_SINGLE_DEVICE
 105 #define CONFIG_SPLASH_SCREEN
 106 #define CONFIG_SPLASH_SCREEN_ALIGN
 107 #define CONFIG_VIDEO_BMP_GZIP              /* gzip compressed bmp images */
 108 #define CFG_VIDEO_LOGO_MAX_SIZE (4 << 20)  /* for decompressed img */
 109 #define CFG_DEFAULT_VIDEO_MODE 0x31a       /* 1280x1024,16bpp */
 110 #define CFG_CONSOLE_IS_IN_ENV
 111 #define CFG_ISA_IO CFG_PCI_IOBASE
 112
 113 /*
 114  * Environment
 115  */
 116 #define CFG_ENV_IS_IN_EEPROM    1       /* use FLASH for environment vars */
 117
 118 /*
 119  * FLASH related
 120  */
 121 #define CFG_FLASH_CFI                   /* The flash is CFI compatible */
 122 #define CFG_FLASH_CFI_DRIVER            /* Use common CFI driver       */
 123
 124 #define CFG_FLASH_BANKS_LIST    { CFG_FLASH_BASE }
 125
 126 #define CFG_MAX_FLASH_BANKS     1       /* max number of memory banks         */
 127 #define CFG_MAX_FLASH_SECT      512     /* max number of sectors on one chip  */
 128
 129 #define CFG_FLASH_ERASE_TOUT    120000  /* Timeout for Flash Erase (in ms)    */
 130 #define CFG_FLASH_WRITE_TOUT    500     /* Timeout for Flash Write (in ms)    */
 131
 132 #define CFG_FLASH_USE_BUFFER_WRITE 1    /* use buffered writes (20x faster)   */
 133 /* CFI_FLASH_PROTECTION make flash_protect hang sometimes -> disabled */
 134 #define CFG_FLASH_PROTECTION    1       /* use hardware flash protection      */
 135
 136 #define CFG_FLASH_EMPTY_INFO
 137 #define CFG_FLASH_QUIET_TEST    1       /* don't warn upon unknown flash      */
 138
 139 #ifdef CFG_ENV_IS_IN_FLASH
 140 #define CFG_ENV_SECT_SIZE       0x20000 /* size of one complete sector        */
 141 #define CFG_ENV_ADDR            ((-CFG_MONITOR_LEN)-CFG_ENV_SECT_SIZE)
 142 #define CFG_ENV_SIZE            0x2000  /* Total Size of Environment Sector   */
 143
 144 /* Address and size of Redundant Environment Sector     */
 145 #define CFG_ENV_ADDR_REDUND     (CFG_ENV_ADDR-CFG_ENV_SECT_SIZE)
 146 #define CFG_ENV_SIZE_REDUND     (CFG_ENV_SIZE)
 147 #endif
 148
 149 #ifdef CFG_ENV_IS_IN_EEPROM
 150 #define CFG_ENV_OFFSET          0       /* environment starts at */
 151                                         /* the beginning of the EEPROM */
 152 #define CFG_ENV_SIZE            0x1000 /* 4096 bytes may be used for env vars */
 153 #endif
 154
 155 /*
 156  * DDR SDRAM
 157  */
 158 #define CFG_MBYTES_SDRAM        (1024)  /* 512 MiB      TODO: remove    */
 159 #define CONFIG_DDR_DATA_EYE             /* use DDR2 optimization        */
 160 #define CONFIG_SPD_EEPROM               /* Use SPD EEPROM for setup     */
 161 #if 0
 162 #define CONFIG_ZERO_SDRAM               /* Zero SDRAM after setup       */
 163 #endif
 164 #define CONFIG_DDR_ECC                  /* Use ECC when available       */
 165 #define SPD_EEPROM_ADDRESS      {0x50}
 166 #define CONFIG_PROG_SDRAM_TLB
 167
 168 /*
 169  * I2C
 170  */
 171 #define CONFIG_HARD_I2C         1       /* I2C with hardware support    */
 172 #undef  CONFIG_SOFT_I2C                 /* I2C bit-banged               */
 173 #define CFG_I2C_SPEED           100000  /* I2C speed and slave address  */
 174 #define CFG_I2C_SLAVE           0x7F
 175 #define CONFIG_I2C_CMD_TREE     1
 176 #define CONFIG_I2C_MULTI_BUS    1
 177
 178 #define CFG_SPD_BUS_NUM         0
 179 #define IIC1_MCP3021_ADDR       0x4d
 180 #define IIC1_USB2507_ADDR       0x2c
 181 #ifdef CONFIG_I2C_MULTI_BUS
 182 #define CFG_I2C_NOPROBES        {{1, IIC1_USB2507_ADDR}}
 183 #endif
 184 #define CFG_I2C_MULTI_EEPROMS
 185 #define CFG_I2C_EEPROM_ADDR     0x54
 186 #define CFG_I2C_EEPROM_ADDR_LEN 2
 187 #define CFG_EEPROM_PAGE_WRITE_ENABLE
 188 #define CFG_EEPROM_PAGE_WRITE_BITS 5
 189 #define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
 190 #define CFG_I2C_EEPROM_ADDR_OVERFLOW 0x01
 191
 192 #define CFG_EEPROM_WREN         1
 193 #define CFG_I2C_BOOT_EEPROM_ADDR 0x52
 194
 195 /*
 196  * standard dtt sensor configuration - bottom bit will determine local or
 197  * remote sensor of the TMP401
 198  */
 199 #define CONFIG_DTT_SENSORS              { 0, 1 }
 200
 201 /*
 202  * The PMC440 uses a TI TMP401 temperature sensor. This part
 203  * is basically compatible to the ADM1021 that is supported
 204  * by U-Boot.
 205  *
 206  * - i2c addr 0x4c
 207  * - conversion rate 0x02 = 0.25 conversions/second
 208  * - ALERT ouput disabled
 209  * - local temp sensor enabled, min set to 0 deg, max set to 70 deg
 210  * - remote temp sensor enabled, min set to 0 deg, max set to 70 deg
 211  */
 212 #define CONFIG_DTT_ADM1021
 213 #define CFG_DTT_ADM1021         { { 0x4c, 0x02, 0, 1, 70, 0, 1, 70, 0} }
 214
 215 /*
 216  * RTC stuff
 217  */
 218 #define CONFIG_RTC_DS1338
 219 #define CFG_I2C_RTC_ADDR        0x68
 220
 221 #undef  CONFIG_BOOTARGS
 222
 223 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 224         "netdev=eth0\0"                                                 \
 225         "ethrotate=no\0"                                                \
 226         "hostname=du440\0"                                              \
 227         "nfsargs=setenv bootargs root=/dev/nfs rw "                     \
 228                 "nfsroot=${serverip}:${rootpath}\0"                     \
 229         "ramargs=setenv bootargs root=/dev/ram rw\0"                    \
 230         "addip=setenv bootargs ${bootargs} "                            \
 231                 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"      \
 232                 ":${hostname}:${netdev}:off panic=1\0"                  \
 233         "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\
 234         "flash_self=run ramargs addip addtty optargs;"                  \
 235                 "bootm ${kernel_addr} ${ramdisk_addr}\0"                \
 236         "net_nfs=tftp 200000 ${img};run nfsargs addip addtty optargs;"  \
 237                 "bootm\0"                                               \
 238         "rootpath=/tftpboot/du440/target_root_du440\0"                  \
 239         "img=/tftpboot/du440/uImage\0"                                  \
 240         "kernel_addr=FFC00000\0"                                        \
 241         "ramdisk_addr=FFE00000\0"                                       \
 242         "initrd_high=30000000\0"                                        \
 243         "load=tftp 100000 /tftpboot/du440/u-boot.bin\0"                 \
 244         "update=protect off FFFA0000 FFFFFFFF;era FFFA0000 FFFFFFFF;"   \
 245                 "cp.b 100000 FFFA0000 60000\0"                          \
 246         ""
 247 #if 0
 248 #define CONFIG_BOOTCOMMAND      "run flash_self"
 249 #endif
 250
 251 #define CONFIG_PREBOOT                  /* enable preboot variable      */
 252
 253 #define CONFIG_BOOTDELAY        3       /* autoboot after 5 seconds     */
 254
 255 #define CONFIG_LOADS_ECHO       1       /* echo on for serial download  */
 256 #define CFG_LOADS_BAUD_CHANGE   1       /* allow baudrate change        */
 257
 258 #ifndef __ASSEMBLY__
 259 int du440_phy_addr(int devnum);
 260 #endif
 261
 262 #define CONFIG_IBM_EMAC4_V4     1
 263 #define CONFIG_MII              1       /* MII PHY management           */
 264 #define CONFIG_PHY_ADDR         du440_phy_addr(0) /* PHY address        */
 265
 266 #define CONFIG_PHY_RESET        1       /* reset phy upon startup       */
 267 #define CONFIG_PHY_GIGE         1       /* Include GbE detection        */
 268
 269 #define CONFIG_HAS_ETH0
 270 #define CFG_RX_ETH_BUFFER       128
 271
 272 #define CONFIG_NET_MULTI        1
 273 #define CONFIG_HAS_ETH1         1       /* add support for "eth1addr"   */
 274 #define CONFIG_PHY1_ADDR        du440_phy_addr(1)
 275
 276 /*
 277  * USB
 278  */
 279 #define CONFIG_USB_OHCI_NEW
 280 #define CONFIG_USB_STORAGE
 281 #define CFG_OHCI_BE_CONTROLLER
 282
 283 #define CFG_USB_OHCI_CPU_INIT   1
 284 #define CFG_USB_OHCI_REGS_BASE  CFG_USB_HOST
 285 #define CFG_USB_OHCI_SLOT_NAME  "du440"
 286 #define CFG_USB_OHCI_MAX_ROOT_PORTS     15
 287
 288 /* Comment this out to enable USB 1.1 device */
 289 #define USB_2_0_DEVICE
 290
 291 /* Partitions */
 292 #define CONFIG_MAC_PARTITION
 293 #define CONFIG_DOS_PARTITION
 294 #define CONFIG_ISO_PARTITION
 295
 296 #include <config_cmd_default.h>
 297
 298 #define CONFIG_CMD_BSP
 299 #define CONFIG_CMD_DATE
 300 #define CONFIG_CMD_ASKENV
 301 #define CONFIG_CMD_DHCP
 302 #define CONFIG_CMD_DTT
 303 #define CONFIG_CMD_DIAG
 304 #define CONFIG_CMD_EEPROM
 305 #define CONFIG_CMD_ELF
 306 #define CONFIG_CMD_FAT
 307 #define CONFIG_CMD_I2C
 308 #define CONFIG_CMD_IRQ
 309 #define CONFIG_CMD_MII
 310 #define CONFIG_CMD_NAND
 311 #define CONFIG_CMD_NET
 312 #define CONFIG_CMD_NFS
 313 #define CONFIG_CMD_PCI
 314 #define CONFIG_CMD_PING
 315 #define CONFIG_CMD_USB
 316 #define CONFIG_CMD_REGINFO
 317 #define CONFIG_CMD_SDRAM
 318
 319 #define CONFIG_SUPPORT_VFAT
 320
 321 /*
 322  * Miscellaneous configurable options
 323  */
 324 #define CFG_LONGHELP                    /* undef to save memory         */
 325 #define CFG_PROMPT              "=> "   /* Monitor Command Prompt       */
 326 #if defined(CONFIG_CMD_KGDB)
 327 #define CFG_CBSIZE              1024    /* Console I/O Buffer Size      */
 328 #else
 329 #define CFG_CBSIZE              256     /* Console I/O Buffer Size      */
 330 #endif
 331 /* Print Buffer Size */
 332 #define CFG_PBSIZE              (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)
 333 #define CFG_MAXARGS             16      /* max number of command args   */
 334 #define CFG_BARGSIZE            CFG_CBSIZE /* Boot Argument Buffer Size */
 335
 336 #define CFG_MEMTEST_START       0x00400000 /* memtest works on          */
 337 #define CFG_MEMTEST_END         0x3f000000 /* 4 ... < 1GB DRAM  */
 338
 339 #define CFG_LOAD_ADDR           0x100000  /* default load address       */
 340 #define CFG_EXTBDINFO           1       /* To use extended board_into (bd_t) */
 341
 342 #define CFG_HZ                  1000    /* decrementer freq: 1 ms ticks */
 343
 344 #define CONFIG_CMDLINE_EDITING  1       /* add command line history     */
 345 #define CONFIG_LOOPW            1       /* enable loopw command         */
 346 #define CONFIG_MX_CYCLIC        1       /* enable mdc/mwc commands      */
 347 #define CONFIG_ZERO_BOOTDELAY_CHECK     /* check for keypress on bootdelay==0 */
 348 #define CONFIG_VERSION_VARIABLE 1       /* include version env variable */
 349
 350 #define CONFIG_AUTOBOOT_KEYED 1
 351 #define CONFIG_AUTOBOOT_PROMPT "Press SPACE to abort autoboot in %d seconds\n"
 352 #define CONFIG_AUTOBOOT_DELAY_STR "d"
 353 #define CONFIG_AUTOBOOT_STOP_STR " "
 354
 355 /*
 356  * PCI stuff
 357  */
 358 #define CONFIG_PCI                      /* include pci support          */
 359 #define CONFIG_PCI_PNP                  /* do (not) pci plug-and-play   */
 360 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup  */
 361 #define CFG_PCI_TARGBASE       0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE*/
 362
 363 /* Board-specific PCI */
 364 #define CFG_PCI_TARGET_INIT
 365 #define CFG_PCI_MASTER_INIT
 366
 367 /*
 368  * For booting Linux, the board info and command line data
 369  * have to be in the first 8 MB of memory, since this is
 370  * the maximum mapped by the Linux kernel during initialization.
 371  */
 372 #define CFG_BOOTMAPSZ           (8 << 20)     /* Initial Memory map for Linux */
 373
 374 /*
 375  * External Bus Controller (EBC) Setup
 376  */
 377 #define CFG_FLASH               CFG_FLASH_BASE
 378
 379 #define CFG_CPLD_BASE           0xC0000000
 380 #define CFG_CPLD_RANGE          0x00000010
 381 #define CFG_DUMEM_BASE          0xC0100000
 382 #define CFG_DUMEM_RANGE         0x00100000
 383 #define CFG_DUIO_BASE           0xC0200000
 384 #define CFG_DUIO_RANGE          0x00010000
 385
 386 #define CFG_NAND0_CS            2               /* NAND chip connected to CSx */
 387 #define CFG_NAND1_CS            3               /* NAND chip connected to CSx */
 388 /* Memory Bank 0 (NOR-FLASH) initialization */
 389 #define CFG_EBC_PB0AP           0x04017200
 390 #define CFG_EBC_PB0CR           (CFG_FLASH_BASE | 0xda000)
 391
 392 /* Memory Bank 1 (CPLD, 16 bytes needed, but 1MB is minimum) */
 393 #define CFG_EBC_PB1AP           0x018003c0
 394 #define CFG_EBC_PB1CR           (CFG_CPLD_BASE | 0x18000)
 395
 396 /* Memory Bank 2 (NAND-FLASH) initialization */
 397 #define CFG_EBC_PB2AP           0x018003c0
 398 #define CFG_EBC_PB2CR           (CFG_NAND0_ADDR | 0x1c000)
 399
 400 /* Memory Bank 3 (NAND-FLASH) initialization */
 401 #define CFG_EBC_PB3AP           0x018003c0
 402 #define CFG_EBC_PB3CR           (CFG_NAND1_ADDR | 0x1c000)
 403
 404 /* Memory Bank 4 (DUMEM, 1MB) initialization */
 405 #define CFG_EBC_PB4AP           0x018053c0
 406 #define CFG_EBC_PB4CR           (CFG_DUMEM_BASE | 0x18000)
 407
 408 /* Memory Bank 5 (DUIO, 64KB needed, but 1MB is minimum) */
 409 #define CFG_EBC_PB5AP           0x018053c0
 410 #define CFG_EBC_PB5CR           (CFG_DUIO_BASE | 0x18000)
 411
 412 /*
 413  * NAND FLASH
 414  */
 415 #define CFG_MAX_NAND_DEVICE     2
 416 #define NAND_MAX_CHIPS          CFG_MAX_NAND_DEVICE
 417 #define CFG_NAND_SELECT_DEVICE  1       /* nand driver supports mutipl. chips */
 418 #define CFG_NAND_BASE_LIST      {CFG_NAND0_ADDR + CFG_NAND0_CS, \
 419                                  CFG_NAND1_ADDR + CFG_NAND1_CS}
 420
 421 /*
 422  * Internal Definitions
 423  *
 424  * Boot Flags
 425  */
 426 #define BOOTFLAG_COLD   0x01            /* Normal Power-On: Boot from FLASH */
 427 #define BOOTFLAG_WARM   0x02            /* Software reboot */
 428
 429 #if defined(CONFIG_CMD_KGDB)
 430 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 431 #define CONFIG_KGDB_SER_INDEX   2       /* which serial port to use */
 432 #endif
 433
 434 #if 0
 435 #define CONFIG_SHOW_ACTIVITY      1
 436 #endif
 437
 438 #endif  /* __CONFIG_H */