include/configs/EVB64260.h

   1 /*
   2  * (C) Copyright 2001
   3  * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
   4  *
   5  * SPDX-License-Identifier:     GPL-2.0+
   6  */
   7
   8 /*
   9  * board/config.h - configuration options, board specific
  10  */
  11
  12 #ifndef __CONFIG_H
  13 #define __CONFIG_H
  14
  15 #ifndef __ASSEMBLY__
  16 #include <galileo/core.h>
  17 #endif
  18
  19 #include "../board/evb64260/local.h"
  20
  21 /*
  22  * High Level Configuration Options
  23  * (easy to change)
  24  */
  25
  26 #define CONFIG_EVB64260         1       /* this is an EVB64260 board    */
  27 #define CONFIG_SYS_GT_6426x        GT_64260 /* with a 64260 system controller */
  28
  29 #define CONFIG_SYS_TEXT_BASE    0xfff00000
  30 #define CONFIG_SYS_LDSCRIPT     "board/evb64260/u-boot.lds"
  31
  32 #define CONFIG_BAUDRATE         38400   /* console baudrate = 38400     */
  33
  34 #undef  CONFIG_ECC                      /* enable ECC support */
  35 /* #define CONFIG_EVB64260_750CX  1 */      /* Support the EVB-64260-750CX Board */
  36
  37 /* which initialization functions to call for this board */
  38 #define CONFIG_MISC_INIT_R      1
  39 #define CONFIG_BOARD_EARLY_INIT_F 1
  40
  41 #ifndef CONFIG_EVB64260_750CX
  42 #define CONFIG_SYS_BOARD_NAME           "EVB64260"
  43 #else
  44 #define CONFIG_SYS_BOARD_NAME         "EVB64260-750CX"
  45 #endif
  46
  47 #define CONFIG_SYS_HUSH_PARSER
  48
  49 /*
  50  * The following defines let you select what serial you want to use
  51  * for your console driver.
  52  *
  53  * what to do:
  54  * to use the DUART, undef CONFIG_MPSC.  If you have hacked a serial
  55  * cable onto the second DUART channel, change the CONFIG_SYS_DUART port from 1
  56  * to 0 below.
  57  *
  58  * to use the MPSC, #define CONFIG_MPSC.  If you have wired up another
  59  * mpsc channel, change CONFIG_MPSC_PORT to the desired value.
  60  */
  61 #define CONFIG_MPSC
  62 #define CONFIG_MPSC_PORT        0
  63
  64
  65 /* define this if you want to enable GT MAC filtering */
  66 #define CONFIG_GT_USE_MAC_HASH_TABLE
  67
  68 #undef CONFIG_ETHER_PORT_MII    /* use RMII */
  69
  70 #if 1
  71 #define CONFIG_BOOTDELAY        -1      /* autoboot disabled            */
  72 #else
  73 #define CONFIG_BOOTDELAY        5       /* autoboot after 5 seconds     */
  74 #endif
  75 #define CONFIG_ZERO_BOOTDELAY_CHECK
  76
  77 #undef  CONFIG_BOOTARGS
  78 #define CONFIG_BOOTCOMMAND                                                   \
  79         "bootp && "                                                  \
  80         "setenv bootargs root=/dev/nfs rw nfsroot=$serverip:$rootpath " \
  81         "ip=$ipaddr:$serverip:$gatewayip:" \
  82         "$netmask:$hostname:eth0:none; && " \
  83         "bootm"
  84
  85 #define CONFIG_LOADS_ECHO       0       /* echo off for serial download */
  86 #define CONFIG_SYS_LOADS_BAUD_CHANGE            /* allow baudrate changes       */
  87
  88 #undef  CONFIG_WATCHDOG                 /* watchdog disabled            */
  89 #undef  CONFIG_ALTIVEC                  /* undef to disable             */
  90
  91 /*
  92  * BOOTP options
  93  */
  94 #define CONFIG_BOOTP_SUBNETMASK
  95 #define CONFIG_BOOTP_GATEWAY
  96 #define CONFIG_BOOTP_HOSTNAME
  97 #define CONFIG_BOOTP_BOOTPATH
  98 #define CONFIG_BOOTP_BOOTFILESIZE
  99
 100
 101 /*
 102  * Command line configuration.
 103  */
 104 #include <config_cmd_default.h>
 105
 106 #define CONFIG_CMD_ASKENV
 107
 108
 109 /*
 110  * Miscellaneous configurable options
 111  */
 112 #define CONFIG_SYS_LONGHELP                     /* undef to save memory         */
 113 #if defined(CONFIG_CMD_KGDB)
 114 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size      */
 115 #else
 116 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size      */
 117 #endif
 118 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
 119 #define CONFIG_SYS_MAXARGS      16              /* max number of command args   */
 120 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size    */
 121
 122 #define CONFIG_SYS_MEMTEST_START        0x00400000      /* memtest works on     */
 123 #define CONFIG_SYS_MEMTEST_END          0x00C00000      /* 4 ... 12 MB in DRAM  */
 124
 125 #define CONFIG_SYS_LOAD_ADDR            0x00300000      /* default load address */
 126 #define CONFIG_SYS_BUS_CLK              100000000       /* 100 MHz              */
 127
 128 #define CONFIG_SYS_BAUDRATE_TABLE       { 9600, 19200, 38400, 57600, 115200, 230400 }
 129
 130 #ifdef CONFIG_EVB64260_750CX
 131 #define CONFIG_750CX
 132 #define CONFIG_SYS_BROKEN_CL2
 133 #endif
 134
 135 /*
 136  * Low Level Configuration Settings
 137  * (address mappings, register initial values, etc.)
 138  * You should know what you are doing if you make changes here.
 139  */
 140
 141 /*-----------------------------------------------------------------------
 142  * Definitions for initial stack pointer and data area
 143  */
 144 #define CONFIG_SYS_INIT_RAM_ADDR        0x40000000
 145 #define CONFIG_SYS_INIT_RAM_SIZE        0x1000
 146 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 147 #define CONFIG_SYS_INIT_RAM_LOCK
 148
 149
 150 /*-----------------------------------------------------------------------
 151  * Start addresses for the final memory configuration
 152  * (Set up by the startup code)
 153  * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
 154  */
 155 #define CONFIG_SYS_SDRAM_BASE           0x00000000
 156 #define CONFIG_SYS_FLASH_BASE           0xfff00000
 157 #define CONFIG_SYS_RESET_ADDRESS        0xfff00100
 158 #define CONFIG_SYS_MONITOR_LEN          (256 << 10)     /* Reserve 256 kB for Monitor */
 159 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
 160 #define CONFIG_SYS_MALLOC_LEN           (256 << 10)     /* Reserve 256 kB for malloc */
 161
 162 /* areas to map different things with the GT in physical space */
 163 #define CONFIG_SYS_DRAM_BANKS           4
 164 #define CONFIG_SYS_DFL_GT_REGS          0x14000000      /* boot time GT_REGS */
 165
 166 /* What to put in the bats. */
 167 #define CONFIG_SYS_MISC_REGION_BASE     0xf0000000
 168
 169 /* Peripheral Device section */
 170 #define CONFIG_SYS_GT_REGS              0xf8000000
 171 #define CONFIG_SYS_DEV_BASE             0xfc000000
 172
 173 #define CONFIG_SYS_DEV0_SPACE           CONFIG_SYS_DEV_BASE
 174 #define CONFIG_SYS_DEV1_SPACE           (CONFIG_SYS_DEV0_SPACE + CONFIG_SYS_DEV0_SIZE)
 175 #define CONFIG_SYS_DEV2_SPACE           (CONFIG_SYS_DEV1_SPACE + CONFIG_SYS_DEV1_SIZE)
 176 #define CONFIG_SYS_DEV3_SPACE           (CONFIG_SYS_DEV2_SPACE + CONFIG_SYS_DEV2_SIZE)
 177
 178 #define CONFIG_SYS_DEV0_SIZE             _8M /* evb64260 sram  @ 0xfc00.0000 */
 179 #define CONFIG_SYS_DEV1_SIZE             _8M /* evb64260 rtc   @ 0xfc80.0000 */
 180 #define CONFIG_SYS_DEV2_SIZE            _16M /* evb64260 duart @ 0xfd00.0000 */
 181 #define CONFIG_SYS_DEV3_SIZE            _16M /* evb64260 flash @ 0xfe00.0000 */
 182
 183 #define CONFIG_SYS_DEV0_PAR             0x20205093
 184 #define CONFIG_SYS_DEV1_PAR             0xcfcfffff
 185 #define CONFIG_SYS_DEV2_PAR             0xc0059bd4
 186 #define CONFIG_SYS_8BIT_BOOT_PAR        0xc00b5e7c
 187 #define CONFIG_SYS_32BIT_BOOT_PAR       0xc4a8241c
 188         /*   c    4    a      8     2     4    1      c         */
 189         /* 33 22|2222|22 22|111 1|11 11|1 1  |    |             */
 190         /* 10 98|7654|32 10|987 6|54 32|1 098|7 654|3 210       */
 191         /* 11|00|0100|10 10|100|0 00|10 0|100 0|001 1|100       */
 192         /*  3| 0|.... ..| 2| 4 |  0 |  4 |  8  |  3  | 4        */
 193
 194 #if 0 /* Wrong?? NTL */
 195 #define CONFIG_SYS_MPP_CONTROL_0        0x53541717      /* InitAct EOT[4] DBurst TCEn[1] */
 196                                                 /* DMAAck[1:0] GNT0[1:0] */
 197 #else
 198 #define CONFIG_SYS_MPP_CONTROL_0        0x53547777      /* InitAct EOT[4] DBurst TCEn[1] */
 199                                                 /* REQ0[1:0] GNT0[1:0] */
 200 #endif
 201 #define CONFIG_SYS_MPP_CONTROL_1        0x44009911      /* TCEn[4] TCTcnt[4] GPP[13:12] */
 202                                                 /* DMAReq[4] DMAAck[4] WDNMI WDE */
 203 #if 0 /* Wrong?? NTL */
 204 #define CONFIG_SYS_MPP_CONTROL_2        0x40091818      /* TCTcnt[0] GPP[22:21] BClkIn */
 205                                                 /* DMAAck[1:0] GNT1[1:0] */
 206 #else
 207 #define CONFIG_SYS_MPP_CONTROL_2        0x40098888      /* TCTcnt[0] */
 208                                                 /* GPP[22] (RS232IntB or PCI1Int) */
 209                                                 /* GPP[21] (RS323IntA) */
 210                                                 /* BClkIn */
 211                                                 /* REQ1[1:0] GNT1[1:0] */
 212 #endif
 213
 214 #if 0 /* Wrong?? NTL */
 215 # define CONFIG_SYS_MPP_CONTROL_3       0x00090066      /* GPP[31:29] BClkOut0 */
 216                                                 /* GPP[27:26] Int[1:0] */
 217 #else
 218 # define CONFIG_SYS_MPP_CONTROL_3       0x22090066      /* MREQ MGNT */
 219                                                 /* GPP[29]    (PCI1Int) */
 220                                                 /* BClkOut0 */
 221                                                 /* GPP[27]    (PCI0Int) */
 222                                                 /* GPP[26]    (RtcInt or PCI1Int) */
 223                                                 /* CPUInt[25:24] */
 224 #endif
 225
 226 # define CONFIG_SYS_SERIAL_PORT_MUX     0x00000102      /* 0=hiZ  1=MPSC0 2=ETH 0 and 2 RMII */
 227
 228 #if 0 /* Wrong?? - NTL */
 229 # define CONFIG_SYS_GPP_LEVEL_CONTROL   0x000002c6
 230 #else
 231 # define CONFIG_SYS_GPP_LEVEL_CONTROL   0x2c600000      /* 0010 1100 0110 0000 */
 232                                                 /* gpp[29] */
 233                                                 /* gpp[27:26] */
 234                                                 /* gpp[22:21] */
 235
 236 # define CONFIG_SYS_SDRAM_CONFIG        0xd8e18200      /* 0x448 */
 237                                 /* idmas use buffer 1,1
 238                                    comm use buffer 0
 239                                    pci use buffer 1,1
 240                                    cpu use buffer 0
 241                                    normal load (see also ifdef HVL)
 242                                    standard SDRAM (see also ifdef REG)
 243                                    non staggered refresh */
 244                                 /* 31:26  25 23  20 19 18 16 */
 245                                 /* 110110 00 111 0  0  00 1 */
 246                                 /* refresh_count=0x200
 247                                    phisical interleaving disable
 248                                    virtual interleaving enable */
 249                                 /* 15 14 13:0 */
 250                                 /* 1  0  0x200 */
 251 #endif
 252
 253 #define CONFIG_SYS_DUART_IO             CONFIG_SYS_DEV2_SPACE
 254 #define CONFIG_SYS_DUART_CHAN           1               /* channel to use for console */
 255 #define CONFIG_SYS_INIT_CHAN1
 256 #define CONFIG_SYS_INIT_CHAN2
 257
 258 #define SRAM_BASE               CONFIG_SYS_DEV0_SPACE
 259 #define SRAM_SIZE               0x00100000              /* 1 MB of sram */
 260
 261
 262 /*-----------------------------------------------------------------------
 263  * PCI stuff
 264  *-----------------------------------------------------------------------
 265  */
 266
 267 #define PCI_HOST_ADAPTER 0              /* configure ar pci adapter     */
 268 #define PCI_HOST_FORCE  1               /* configure as pci host        */
 269 #define PCI_HOST_AUTO   2               /* detected via arbiter enable  */
 270
 271 #define CONFIG_PCI                      /* include pci support          */
 272 #define CONFIG_PCI_HOST PCI_HOST_FORCE  /* select pci host function     */
 273 #define CONFIG_PCI_PNP                  /* do pci plug-and-play         */
 274
 275 /* PCI MEMORY MAP section */
 276 #define CONFIG_SYS_PCI0_MEM_BASE        0x80000000
 277 #define CONFIG_SYS_PCI0_MEM_SIZE        _128M
 278 #define CONFIG_SYS_PCI1_MEM_BASE        0x88000000
 279 #define CONFIG_SYS_PCI1_MEM_SIZE        _128M
 280
 281 #define CONFIG_SYS_PCI0_0_MEM_SPACE     (CONFIG_SYS_PCI0_MEM_BASE)
 282 #define CONFIG_SYS_PCI1_0_MEM_SPACE     (CONFIG_SYS_PCI1_MEM_BASE)
 283
 284
 285 /* PCI I/O MAP section */
 286 #define CONFIG_SYS_PCI0_IO_BASE 0xfa000000
 287 #define CONFIG_SYS_PCI0_IO_SIZE _16M
 288 #define CONFIG_SYS_PCI1_IO_BASE 0xfb000000
 289 #define CONFIG_SYS_PCI1_IO_SIZE _16M
 290
 291 #define CONFIG_SYS_PCI0_IO_SPACE        (CONFIG_SYS_PCI0_IO_BASE)
 292 #define CONFIG_SYS_PCI0_IO_SPACE_PCI    0x00000000
 293 #define CONFIG_SYS_PCI1_IO_SPACE        (CONFIG_SYS_PCI1_IO_BASE)
 294 #define CONFIG_SYS_PCI1_IO_SPACE_PCI    0x00000000
 295
 296 /*
 297  * NS16550 Configuration
 298  */
 299 #define CONFIG_SYS_NS16550
 300
 301 #define CONFIG_SYS_NS16550_REG_SIZE     -4
 302
 303 #define CONFIG_SYS_NS16550_CLK          3686400
 304
 305 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_DUART_IO + 0)
 306 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_DUART_IO + 0x20)
 307
 308 /*----------------------------------------------------------------------
 309  * Initial BAT mappings
 310  */
 311
 312 /* NOTES:
 313  * 1) GUARDED and WRITE_THRU not allowed in IBATS
 314  * 2) CACHEINHIBIT and WRITETHROUGH not allowed together in same BAT
 315  */
 316
 317 /* SDRAM */
 318 #define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
 319 #define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
 320 #define CONFIG_SYS_DBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
 321 #define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U
 322
 323 /* init ram */
 324 #define CONFIG_SYS_IBAT1L  (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_RW | BATL_MEMCOHERENCE)
 325 #define CONFIG_SYS_IBAT1U  (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
 326 #define CONFIG_SYS_DBAT1L  CONFIG_SYS_IBAT1L
 327 #define CONFIG_SYS_DBAT1U  CONFIG_SYS_IBAT1U
 328
 329 /* PCI0, PCI1 in one BAT */
 330 #define CONFIG_SYS_IBAT2L BATL_NO_ACCESS
 331 #define CONFIG_SYS_IBAT2U CONFIG_SYS_DBAT2U
 332 #define CONFIG_SYS_DBAT2L (CONFIG_SYS_PCI0_MEM_BASE | BATL_CACHEINHIBIT | BATL_PP_RW | BATL_GUARDEDSTORAGE)
 333 #define CONFIG_SYS_DBAT2U (CONFIG_SYS_PCI0_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
 334
 335 /* GT regs, bootrom, all the devices, PCI I/O */
 336 #define CONFIG_SYS_IBAT3L (CONFIG_SYS_MISC_REGION_BASE | BATL_CACHEINHIBIT | BATL_PP_RW)
 337 #define CONFIG_SYS_IBAT3U (CONFIG_SYS_MISC_REGION_BASE | BATU_VS | BATU_VP | BATU_BL_256M)
 338 #define CONFIG_SYS_DBAT3L (CONFIG_SYS_MISC_REGION_BASE | BATL_CACHEINHIBIT | BATL_PP_RW | BATL_GUARDEDSTORAGE)
 339 #define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U
 340
 341 /* I2C speed and slave address (for compatability) defaults */
 342 #define CONFIG_SYS_I2C_SPEED    400000
 343 #define CONFIG_SYS_I2C_SLAVE    0x7F
 344
 345 /* I2C addresses for the two DIMM SPD chips */
 346 #ifndef CONFIG_EVB64260_750CX
 347 #define DIMM0_I2C_ADDR  0x56
 348 #define DIMM1_I2C_ADDR  0x54
 349 #else /* CONFIG_EVB64260_750CX - only has 1 DIMM */
 350 #define DIMM0_I2C_ADDR  0x54
 351 #define DIMM1_I2C_ADDR  0x54
 352 #endif
 353
 354 /*
 355  * For booting Linux, the board info and command line data
 356  * have to be in the first 8 MB of memory, since this is
 357  * the maximum mapped by the Linux kernel during initialization.
 358  */
 359 #define CONFIG_SYS_BOOTMAPSZ            (8<<20) /* Initial Memory map for Linux */
 360
 361 /*-----------------------------------------------------------------------
 362  * FLASH organization
 363  */
 364 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* max number of memory banks   */
 365 #define CONFIG_SYS_MAX_FLASH_SECT       67      /* max number of sectors on one chip */
 366
 367 #define CONFIG_SYS_EXTRA_FLASH_DEVICE   DEVICE3 /* extra flash at device 3 */
 368 #define CONFIG_SYS_EXTRA_FLASH_WIDTH    4       /* 32 bit */
 369
 370 #define CONFIG_SYS_FLASH_ERASE_TOUT     120000  /* Timeout for Flash Erase (in ms) */
 371 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Timeout for Flash Write (in ms) */
 372 #define CONFIG_SYS_FLASH_CFI            1
 373
 374 #define CONFIG_ENV_IS_IN_FLASH  1
 375 #define CONFIG_ENV_SIZE         0x1000  /* Total Size of Environment Sector */
 376 #define CONFIG_ENV_SECT_SIZE    0x10000
 377 #define CONFIG_ENV_ADDR    (CONFIG_SYS_FLASH_BASE+CONFIG_SYS_MONITOR_LEN-CONFIG_ENV_SECT_SIZE)
 378
 379 /*-----------------------------------------------------------------------
 380  * Cache Configuration
 381  */
 382 #define CONFIG_SYS_CACHELINE_SIZE       32      /* For all MPC74xx CPUs          */
 383 #if defined(CONFIG_CMD_KGDB)
 384 #define CONFIG_SYS_CACHELINE_SHIFT      5       /* log base 2 of the above value */
 385 #endif
 386
 387 /*-----------------------------------------------------------------------
 388  * L2CR setup -- make sure this is right for your board!
 389  * look in include/74xx_7xx.h for the defines used here
 390  */
 391
 392 #define CONFIG_SYS_L2
 393
 394 #ifdef CONFIG_750CX
 395 #define L2_INIT         0
 396 #else
 397 #define L2_INIT         (L2CR_L2SIZ_2M | L2CR_L2CLK_3 | L2CR_L2RAM_BURST | \
 398                          L2CR_L2OH_5 | L2CR_L2CTL | L2CR_L2WT)
 399 #endif
 400
 401 #define L2_ENABLE       (L2_INIT | L2CR_L2E)
 402
 403 #define CONFIG_SYS_BOARD_ASM_INIT      1
 404
 405
 406 #endif  /* __CONFIG_H */