include/configs/FADS823.h

   1  /*
   2   * A collection of structures, addresses, and values associated with
   3   * the Motorola 860T FADS board.  Copied from the MBX stuff.
   4   * Magnus Damm added defines for 8xxrom and extended bd_info.
   5   * Helmut Buchsbaum added bitvalues for BCSRx
   6   *
   7   * Copyright (c) 1998 Dan Malek (dmalek@jlc.net)
   8   */
   9
  10 /*
  11  * 1999-nov-26: The FADS is using the following physical memorymap:
  12  *
  13  * ff020000 -> ff02ffff : pcmcia     io remapping
  14  * ff010000 -> ff01ffff : BCSR       connected to CS1, setup by U-Boot
  15  * ff000000 -> ff00ffff : IMAP       internal in the cpu
  16  * e0000000 -> f3ffffff : pcmcia     memory remapping by m8xx_pcmcia
  17  * fe000000 -> fe1fffff : flash      connected to CS0, setup by U-Boot
  18  * 00000000 -> nnnnnnnn : sdram/dram setup by U-Boot
  19 */
  20
  21 #define CFG_PCMCIA_IO_ADDR      0xff020000
  22 #define CFG_PCMCIA_IO_SIZE      0x10000
  23 #define CFG_PCMCIA_MEM_ADDR     0xe0000000
  24 #define CFG_PCMCIA_MEM_SIZE     0x10000
  25 #define CFG_IMMR                0xFF000000
  26 #define CFG_SDRAM_SIZE          (4<<20) /* standard FADS has 4M */
  27 #define CFG_SDRAM_BASE          0x00000000
  28 #define CFG_FLASH_BASE          0x02800000
  29 #define BCSR_ADDR               ((uint) 0xff010000)
  30 #define FLASH_BASE0_PRELIM      0x02800000      /* FLASH bank #0        */
  31
  32 /* ------------------------------------------------------------------------- */
  33
  34 /*
  35  * board/config.h - configuration options, board specific
  36  */
  37
  38 #ifndef __CONFIG_H
  39 #define __CONFIG_H
  40
  41 #define CONFIG_ETHADDR          08:00:22:50:70:63       /* Ethernet address */
  42 #define CONFIG_ENV_OVERWRITE    1       /* Overwrite the environment */
  43
  44 #define CONFIG_VIDEO            1       /* To enable video controller support */
  45 #define CONFIG_HARD_I2C         1       /* To I2C with hardware support */
  46 #define CFG_I2C_SPEED           400000  /* I2C speed and slave address */
  47 #define CFG_I2C_SLAVE           0x7F
  48
  49 /*Now included by CFG_CMD_PCMCIA */
  50 /*#define CONFIG_PCMCIA         1       / * To enable PCMCIA support */
  51
  52 /* Video related */
  53
  54 #define CONFIG_VIDEO_LOGO                       1       /* Show the logo */
  55 #define CONFIG_VIDEO_ENCODER_AD7176             1       /* Enable this encoder */
  56 #define CONFIG_VIDEO_ENCODER_AD7176_ADDR        0x54    /* Default on fads */
  57 #define CONFIG_VIDEO_SIZE                       (2*1024*1024)
  58 /* #define CONFIG_VIDEO_ADDR (gd->bd->bi_memsize - CONFIG_VIDEO_SIZE) Frame buffer address */
  59
  60 /* Wireless 56Khz 4PPM keyboard on SMCx */
  61
  62 /*#define CONFIG_KEYBOARD               1 */
  63 #define CONFIG_WL_4PPM_KEYBOARD_SMC     0       /* SMC to use (0 indexed) */
  64
  65 /*
  66  * High Level Configuration Options
  67  * (easy to change)
  68  */
  69 #define CONFIG_MPC823           1
  70 #define CONFIG_MPC823FADS       1
  71 #define CONFIG_FADS             1
  72
  73 #define CONFIG_8xx_CONS_SMC1    1       /* Console is on SMC1           */
  74 #undef  CONFIG_8xx_CONS_SMC2
  75 #undef  CONFIG_8xx_CONS_NONE
  76 #define CONFIG_BAUDRATE         115200
  77
  78 /* Set the CPU speed to 50Mhz on the FADS */
  79
  80 #if 0
  81 #define MPC8XX_FACT     10                      /* Multiply by 10               */
  82 #define MPC8XX_XIN      5000000                 /* 5 MHz in     */
  83 #else
  84 #define MPC8XX_FACT     10                      /* Multiply by 10 */
  85 #define MPC8XX_XIN      5000000                 /* 5 MHz in */
  86 #define CFG_PLPRCR_MF   (MPC8XX_FACT-1) << 20   /* From 0 to 4095 */
  87 #endif
  88 #define MPC8XX_HZ ((MPC8XX_XIN) * (MPC8XX_FACT))
  89
  90 #define CONFIG_CLOCKS_IN_MHZ    1       /* clocks passsed to Linux in MHz */
  91
  92 #if 1
  93 #define CONFIG_BOOTDELAY        2       /* autoboot after 2 seconds     */
  94 #define CONFIG_LOADS_ECHO       0       /* Dont echoes received characters */
  95 #define CONFIG_BOOTARGS         ""
  96 #define CONFIG_BOOTCOMMAND                                                      \
  97 "bootp ;"                                                                       \
  98 "setenv bootargs console=tty0 console=ttyS0 "                                   \
  99 "root=/dev/nfs nfsroot=${serverip}:${rootpath} "                                \
 100 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}:eth0:off ;"       \
 101 "bootm"
 102 #else
 103 #define CONFIG_BOOTDELAY        0       /* autoboot disabled            */
 104 #endif
 105
 106 #undef  CONFIG_WATCHDOG                 /* watchdog disabled            */
 107
 108 #define CONFIG_BOOTP_MASK       CONFIG_BOOTP_ALL
 109
 110 /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
 111 #include <cmd_confdefs.h>
 112
 113 /*
 114  * Miscellaneous configurable options
 115  */
 116 #define CFG_LONGHELP                            /* undef to save memory         */
 117 #define CFG_PROMPT              ":>"            /* Monitor Command Prompt       */
 118 #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
 119 #define CFG_CBSIZE              1024            /* Console I/O Buffer Size      */
 120 #else
 121 #define CFG_CBSIZE              256             /* Console I/O Buffer Size      */
 122 #endif
 123 #define CFG_PBSIZE              (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
 124 #define CFG_MAXARGS             16              /* max number of command args   */
 125 #define CFG_BARGSIZE            CFG_CBSIZE      /* Boot Argument Buffer Size    */
 126
 127 #define CFG_MEMTEST_START       0x00004000      /* memtest works on     */
 128 #define CFG_MEMTEST_END         0x01000000      /* 0 ... 16 MB in DRAM  */
 129
 130 #define CFG_LOAD_ADDR           0x00100000      /* default load address */
 131
 132 #define CFG_HZ          1000            /* decrementer freq: 1 ms ticks */
 133
 134 #define CFG_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
 135
 136 /*
 137  * Low Level Configuration Settings
 138  * (address mappings, register initial values, etc.)
 139  * You should know what you are doing if you make changes here.
 140  */
 141 /*-----------------------------------------------------------------------
 142  * Internal Memory Mapped Register
 143  */
 144 #define CFG_IMMR_SIZE           ((uint)(64 * 1024))
 145
 146 /*-----------------------------------------------------------------------
 147  * Definitions for initial stack pointer and data area (in DPRAM)
 148  */
 149 #define CFG_INIT_RAM_ADDR       CFG_IMMR
 150 #define CFG_INIT_RAM_END        0x2F00  /* End of used area in DPRAM    */
 151 #define CFG_GBL_DATA_SIZE       64      /* size in bytes reserved for initial data */
 152 #define CFG_GBL_DATA_OFFSET     (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
 153 #define CFG_INIT_SP_OFFSET      CFG_GBL_DATA_OFFSET
 154
 155 /*-----------------------------------------------------------------------
 156  * Start addresses for the final memory configuration
 157  * (Set up by the startup code)
 158  * Please note that CFG_SDRAM_BASE _must_ start at 0
 159  * Also NOTE that it doesn't mean SDRAM - it means MEMORY.
 160  */
 161 #define CFG_FLASH_SIZE          ((uint)(8 * 1024 * 1024))       /* max 8Mbyte */
 162 #if 0
 163 #define CFG_MONITOR_LEN         (256 << 10)     /* Reserve 256 kB for Monitor   */
 164 #else
 165 #define CFG_MONITOR_LEN         (512 << 10)     /* Reserve 512 kB for Monitor   */
 166 #endif
 167 #define CFG_MONITOR_BASE        CFG_FLASH_BASE
 168 #define CFG_MALLOC_LEN          (128 << 10)     /* Reserve 128 kB for malloc()  */
 169
 170 /*
 171  * For booting Linux, the board info and command line data
 172  * have to be in the first 8 MB of memory, since this is
 173  * the maximum mapped by the Linux kernel during initialization.
 174  */
 175 #define CFG_BOOTMAPSZ           (8 << 20)       /* Initial Memory map for Linux */
 176 /*-----------------------------------------------------------------------
 177  * FLASH organization
 178  */
 179 #define CFG_MAX_FLASH_BANKS     1       /* max number of memory banks           */
 180 #define CFG_MAX_FLASH_SECT      8       /* max number of sectors on one chip    */
 181
 182 #define CFG_FLASH_ERASE_TOUT    120000  /* Timeout for Flash Erase (in ms)      */
 183 #define CFG_FLASH_WRITE_TOUT    500     /* Timeout for Flash Write (in ms)      */
 184
 185 #define CFG_ENV_IS_IN_FLASH     1
 186 #define CFG_ENV_OFFSET          0x00040000      /* Offset of Environment Sector */
 187 #define CFG_ENV_SIZE            0x40000 /* Total Size of Environment Sector     */
 188
 189 /*-----------------------------------------------------------------------
 190  * Cache Configuration
 191  */
 192 #define CFG_CACHELINE_SIZE      16      /* For all MPC8xx CPUs                  */
 193 #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
 194 #define CFG_CACHELINE_SHIFT     4       /* log base 2 of the above value        */
 195 #endif
 196
 197 /*-----------------------------------------------------------------------
 198  * SYPCR - System Protection Control                                    11-9
 199  * SYPCR can only be written once after reset!
 200  *-----------------------------------------------------------------------
 201  * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
 202  */
 203 #if defined(CONFIG_WATCHDOG)
 204 #define CFG_SYPCR       (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
 205                          SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
 206 #else
 207 #define CFG_SYPCR       (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
 208 #endif
 209
 210 /*-----------------------------------------------------------------------
 211  * SIUMCR - SIU Module Configuration                                            11-6
 212  *-----------------------------------------------------------------------
 213  * PCMCIA config., multi-function pin tri-state
 214  */
 215 #define CFG_SIUMCR      (SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
 216
 217 /*-----------------------------------------------------------------------
 218  * TBSCR - Time Base Status and Control                                 11-26
 219  *-----------------------------------------------------------------------
 220  * Clear Reference Interrupt Status, Timebase freezing enabled
 221  */
 222 #define CFG_TBSCR       (TBSCR_REFA | TBSCR_REFB | TBSCR_TBE)
 223
 224 /*-----------------------------------------------------------------------
 225  * PISCR - Periodic Interrupt Status and Control                11-31
 226  *-----------------------------------------------------------------------
 227  * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
 228  */
 229 #define CFG_PISCR       (PISCR_PS | PISCR_PITF)
 230
 231 /*-----------------------------------------------------------------------
 232  * PLPRCR - PLL, Low-Power, and Reset Control Register  15-30
 233  *-----------------------------------------------------------------------
 234  * Reset PLL lock status sticky bit, timer expired status bit and timer  *
 235  * interrupt status bit - leave PLL multiplication factor unchanged !
 236  */
 237 #define CFG_PLPRCR      (PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST | CFG_PLPRCR_MF)
 238
 239 /*-----------------------------------------------------------------------
 240  * SCCR - System Clock and reset Control Register               15-27
 241  *-----------------------------------------------------------------------
 242  * Set clock output, timebase and RTC source and divider,
 243  * power management and some other internal clocks
 244  */
 245 #define SCCR_MASK       SCCR_EBDF11
 246 #define CFG_SCCR       (SCCR_TBS     | \
 247                                 SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
 248                                 SCCR_DFNL000 | SCCR_DFNH000  | SCCR_DFLCD000 | \
 249                                 SCCR_DFALCD00)
 250
 251  /*-----------------------------------------------------------------------
 252  *
 253  *-----------------------------------------------------------------------
 254  *
 255  */
 256 #define CFG_DER         0
 257
 258 /* Because of the way the 860 starts up and assigns CS0 the
 259 * entire address space, we have to set the memory controller
 260 * differently.  Normally, you write the option register
 261 * first, and then enable the chip select by writing the
 262 * base register.  For CS0, you must write the base register
 263 * first, followed by the option register.
 264 */
 265
 266 /*
 267  * Init Memory Controller:
 268  *
 269  * BR0/1 and OR0/1 (FLASH)
 270  */
 271 /* the other CS:s are determined by looking at parameters in BCSRx */
 272
 273 #define BCSR_SIZE               ((uint)(64 * 1024))
 274
 275 #define FLASH_BASE1_PRELIM      0x00000000      /* FLASH bank #1        */
 276
 277 #define CFG_REMAP_OR_AM         0x80000000      /* OR addr mask */
 278 #define CFG_PRELIM_OR_AM        0xFFE00000      /* OR addr mask */
 279
 280 /* FLASH timing: ACS = 10, TRLX = 1, CSNT = 1, SCY = 3, EHTR = 0        */
 281 #define CFG_OR_TIMING_FLASH     (OR_CSNT_SAM  | OR_ACS_DIV4 | OR_BI | OR_SCY_3_CLK | OR_TRLX)
 282
 283 #define CFG_OR0_REMAP   (CFG_REMAP_OR_AM  | CFG_OR_TIMING_FLASH)
 284 #define CFG_OR0_PRELIM  (CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH)   /* 1 Mbyte until detected and only 1 Mbyte is needed*/
 285 #define CFG_BR0_PRELIM  ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V )
 286
 287 /* BCSRx - Board Control and Status Registers */
 288 #define CFG_OR1_REMAP   CFG_OR0_REMAP
 289 #define CFG_OR1_PRELIM  0xffff8110                                                                      /* 64Kbyte address space */
 290 #define CFG_BR1_PRELIM  ((BCSR_ADDR) | BR_V )
 291
 292
 293 /*
 294  * Memory Periodic Timer Prescaler
 295  */
 296
 297 /* periodic timer for refresh */
 298 #define CFG_MAMR_PTA            97              /* start with divider for 100 MHz       */
 299
 300 /* refresh rate 15.6 us (= 64 ms / 4K = 62.4 / quad bursts) for <= 128 MBit     */
 301 #define CFG_MPTPR_2BK_4K        MPTPR_PTP_DIV16         /* setting for 2 banks  */
 302 #define CFG_MPTPR_1BK_4K        MPTPR_PTP_DIV32         /* setting for 1 bank   */
 303
 304 /* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit         */
 305 #define CFG_MPTPR_2BK_8K        MPTPR_PTP_DIV8          /* setting for 2 banks  */
 306 #define CFG_MPTPR_1BK_8K        MPTPR_PTP_DIV16         /* setting for 1 bank   */
 307
 308 /*
 309  * MAMR settings for SDRAM
 310  */
 311
 312 /* 8 column SDRAM */
 313 #define CFG_MAMR_8COL   ((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE      |   \
 314                          MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 |   \
 315                          MAMR_RLFA_1X    | MAMR_WLFA_1X    | MAMR_TLFA_4X)
 316 /* 9 column SDRAM */
 317 #define CFG_MAMR_9COL   ((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE      |   \
 318                          MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |   \
 319                          MAMR_RLFA_1X    | MAMR_WLFA_1X    | MAMR_TLFA_4X)
 320
 321 #define CFG_MAMR                0x13a01114
 322 /*
 323  * Internal Definitions
 324  *
 325  * Boot Flags
 326  */
 327 #define BOOTFLAG_COLD                   0x01            /* Normal Power-On: Boot from FLASH     */
 328 #define BOOTFLAG_WARM                   0x02            /* Software reboot                      */
 329
 330 /* values according to the manual */
 331
 332 #define BCSR0                   ((uint) (BCSR_ADDR + 00))
 333 #define BCSR1                   ((uint) (BCSR_ADDR + 0x04))
 334 #define BCSR2                   ((uint) (BCSR_ADDR + 0x08))
 335 #define BCSR3                   ((uint) (BCSR_ADDR + 0x0c))
 336 #define BCSR4                   ((uint) (BCSR_ADDR + 0x10))
 337
 338 /* FADS bitvalues by Helmut Buchsbaum
 339  * see MPC8xxADS User's Manual for a proper description
 340  * of the following structures
 341  */
 342
 343 #define BCSR0_ERB       ((uint)0x80000000)
 344 #define BCSR0_IP        ((uint)0x40000000)
 345 #define BCSR0_BDIS      ((uint)0x10000000)
 346 #define BCSR0_BPS_MASK  ((uint)0x0C000000)
 347 #define BCSR0_ISB_MASK  ((uint)0x01800000)
 348 #define BCSR0_DBGC_MASK ((uint)0x00600000)
 349 #define BCSR0_DBPC_MASK ((uint)0x00180000)
 350 #define BCSR0_EBDF_MASK ((uint)0x00060000)
 351
 352 #define BCSR1_FLASH_EN           ((uint)0x80000000)
 353 #define BCSR1_DRAM_EN            ((uint)0x40000000)
 354 #define BCSR1_ETHEN              ((uint)0x20000000)
 355 #define BCSR1_IRDEN              ((uint)0x10000000)
 356 #define BCSR1_FLASH_CFG_EN       ((uint)0x08000000)
 357 #define BCSR1_CNT_REG_EN_PROTECT ((uint)0x04000000)
 358 #define BCSR1_BCSR_EN            ((uint)0x02000000)
 359 #define BCSR1_RS232EN_1          ((uint)0x01000000)
 360 #define BCSR1_PCCEN              ((uint)0x00800000)
 361 #define BCSR1_PCCVCC0            ((uint)0x00400000)
 362 #define BCSR1_PCCVPP_MASK        ((uint)0x00300000)
 363 #define BCSR1_DRAM_HALF_WORD     ((uint)0x00080000)
 364 #define BCSR1_RS232EN_2          ((uint)0x00040000)
 365 #define BCSR1_SDRAM_EN           ((uint)0x00020000)
 366 #define BCSR1_PCCVCC1            ((uint)0x00010000)
 367
 368 #define BCSR2_FLASH_PD_MASK      ((uint)0xF0000000)
 369 #define BCSR2_FLASH_PD_SHIFT     28
 370 #define BCSR2_DRAM_PD_MASK       ((uint)0x07800000)
 371 #define BCSR2_DRAM_PD_SHIFT      23
 372 #define BCSR2_EXTTOLI_MASK       ((uint)0x00780000)
 373 #define BCSR2_DBREVNR_MASK       ((uint)0x00030000)
 374
 375 #define BCSR3_DBID_MASK          ((ushort)0x3800)
 376 #define BCSR3_CNT_REG_EN_PROTECT ((ushort)0x0400)
 377 #define BCSR3_BREVNR0            ((ushort)0x0080)
 378 #define BCSR3_FLASH_PD_MASK      ((ushort)0x0070)
 379 #define BCSR3_BREVN1             ((ushort)0x0008)
 380 #define BCSR3_BREVN2_MASK        ((ushort)0x0003)
 381
 382 #define BCSR4_ETHLOOP            ((uint)0x80000000)
 383 #define BCSR4_TFPLDL             ((uint)0x40000000)
 384 #define BCSR4_TPSQEL             ((uint)0x20000000)
 385 #define BCSR4_SIGNAL_LAMP        ((uint)0x10000000)
 386 #ifdef CONFIG_MPC823
 387 #define BCSR4_USB_EN             ((uint)0x08000000)
 388 #endif /* CONFIG_MPC823 */
 389 #ifdef CONFIG_MPC860SAR
 390 #define BCSR4_UTOPIA_EN          ((uint)0x08000000)
 391 #endif /* CONFIG_MPC860SAR */
 392 #ifdef CONFIG_MPC860T
 393 #define BCSR4_FETH_EN            ((uint)0x08000000)
 394 #endif /* CONFIG_MPC860T */
 395 #ifdef CONFIG_MPC823
 396 #define BCSR4_USB_SPEED          ((uint)0x04000000)
 397 #endif /* CONFIG_MPC823 */
 398 #ifdef CONFIG_MPC860T
 399 #define BCSR4_FETHCFG0           ((uint)0x04000000)
 400 #endif /* CONFIG_MPC860T */
 401 #ifdef CONFIG_MPC823
 402 #define BCSR4_VCCO               ((uint)0x02000000)
 403 #endif /* CONFIG_MPC823 */
 404 #ifdef CONFIG_MPC860T
 405 #define BCSR4_FETHFDE            ((uint)0x02000000)
 406 #endif /* CONFIG_MPC860T */
 407 #ifdef CONFIG_MPC823
 408 #define BCSR4_VIDEO_ON           ((uint)0x00800000)
 409 #endif /* CONFIG_MPC823 */
 410 #ifdef CONFIG_MPC823
 411 #define BCSR4_VDO_EKT_CLK_EN     ((uint)0x00400000)
 412 #endif /* CONFIG_MPC823 */
 413 #ifdef CONFIG_MPC860T
 414 #define BCSR4_FETHCFG1           ((uint)0x00400000)
 415 #endif /* CONFIG_MPC860T */
 416 #ifdef CONFIG_MPC823
 417 #define BCSR4_VIDEO_RST          ((uint)0x00200000)
 418 #endif /* CONFIG_MPC823 */
 419 #ifdef CONFIG_MPC860T
 420 #define BCSR4_FETHRST            ((uint)0x00200000)
 421 #endif /* CONFIG_MPC860T */
 422 #ifdef CONFIG_MPC823
 423 #define BCSR4_MODEM_EN           ((uint)0x00100000)
 424 #endif /* CONFIG_MPC823 */
 425 #ifdef CONFIG_MPC823
 426 #define BCSR4_DATA_VOICE         ((uint)0x00080000)
 427 #endif /* CONFIG_MPC823 */
 428 #ifdef CONFIG_MPC850
 429 #define BCSR4_DATA_VOICE         ((uint)0x00080000)
 430 #endif /* CONFIG_MPC850 */
 431
 432 #define CONFIG_DRAM_50MHZ               1
 433 #define CONFIG_SDRAM_50MHZ
 434
 435 /* We don't use the 8259.
 436 */
 437 #define NR_8259_INTS    0
 438
 439 /* Machine type
 440 */
 441 #define _MACH_8xx (_MACH_fads)
 442
 443 /*
 444  * MPC8xx CPM Options
 445  */
 446 #define CONFIG_SCC_ENET 1
 447 #define CONFIG_SCC2_ENET 1
 448 #undef  CONFIG_FEC_ENET
 449 #undef  CONFIG_CPM_IIC
 450 #undef  CONFIG_UCODE_PATCH
 451
 452 #define CONFIG_DISK_SPINUP_TIME 1000000
 453
 454 /* PCMCIA configuration */
 455
 456 #define PCMCIA_MAX_SLOTS    1
 457
 458 #ifdef CONFIG_MPC860
 459 #define PCMCIA_SLOT_A 1
 460 #endif
 461
 462 #define CFG_DAUGHTERBOARD
 463
 464 #endif  /* __CONFIG_H */