include/configs/IAD210.h

   1 /*
   2  * (C) Copyright 2001, 2002
   3  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
   4  *
   5  * See file CREDITS for list of people who contributed to this
   6  * project.
   7  *
   8  * This program is free software; you can redistribute it and/or
   9  * modify it under the terms of the GNU General Public License as
  10  * published by the Free Software Foundation; either version 2 of
  11  * the License, or (at your option) any later version.
  12  *
  13  * This program is distributed in the hope that it will be useful,
  14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  16  * GNU General Public License for more details.
  17  *
  18  * You should have received a copy of the GNU General Public License
  19  * along with this program; if not, write to the Free Software
  20  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  21  * MA 02111-1307 USA
  22  */
  23
  24 /*
  25  * board/config.h - configuration options, board specific
  26  */
  27
  28 #ifndef __CONFIG_H
  29 #define __CONFIG_H
  30
  31 #include <mpc8xx_irq.h>
  32
  33
  34 # ifdef DEBUG
  35 #  warning DEBUG Defined
  36 # endif /* DEBUG */
  37
  38 /*
  39  * High Level Configuration Options
  40  * (easy to change)
  41  */
  42 #define CONFIG_MPC860           1
  43 #define CONFIG_IAD210           1       /* ...on a IAD210  module       */
  44 #define CONFIG_MPC860T          1
  45 #define CONFIG_MPC862           1
  46
  47 #define CONFIG_LOADS_ECHO       1       /* echo on for serial download  */
  48
  49 #undef  CONFIG_8xx_CONS_SMC1
  50 #undef  CONFIG_8xx_CONS_SMC2
  51 #define CONFIG_8xx_CONS_SCC2   /* V24 on SCC2 */
  52 #undef  CONFIG_8xx_CONS_NONE
  53 #define CONFIG_BAUDRATE         9600
  54
  55
  56 # define MPC8XX_FACT            16
  57 # define CONFIG_8xx_GCLK_FREQ   (64000000L)  /* define if can't use get_gclk_freq */
  58 # define CONFIG_CLOCKS_IN_MHZ   1            /* clocks passsed to Linux in MHz */
  59
  60 #if 0
  61 # define CONFIG_BOOTDELAY       -1      /* autoboot disabled            */
  62 #else
  63 # define CONFIG_BOOTDELAY       5       /* autoboot after 5 seconds     */
  64 #endif
  65
  66 #define CONFIG_PREBOOT  "echo;echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;echo"
  67
  68 /* using this define saves us updating another source file */
  69 #define CONFIG_BOARD_EARLY_INIT_F 1
  70 #define CONFIG_MISC_INIT_R
  71
  72 #undef  CONFIG_BOOTARGS
  73 /* #define CONFIG_BOOTCOMMAND                                                   \
  74         "bootp;"                                                                \
  75         "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} "     \
  76         "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off;"    \
  77         "bootm"
  78 */
  79
  80 #define CONFIG_BOOTCOMMAND      \
  81         "setenv bootargs root=/dev/nfs" \
  82         "ip=192.168.28.129:139.10.137.138:192.168.28.1:255.255.255.0:iadlinux002::off; "        \
  83
  84 #undef  CONFIG_WATCHDOG                 /* watchdog disabled            */
  85
  86 /* #define      CONFIG_STATUS_LED       1*/     /* Status LED enabled           */
  87
  88 /*
  89  * BOOTP options
  90  */
  91 #define CONFIG_BOOTP_SUBNETMASK
  92 #define CONFIG_BOOTP_GATEWAY
  93 #define CONFIG_BOOTP_HOSTNAME
  94 #define CONFIG_BOOTP_BOOTPATH
  95 #define CONFIG_BOOTP_BOOTFILESIZE
  96
  97
  98 # undef  CONFIG_SCC1_ENET               /* disable SCC1 ethernet */
  99 # define CONFIG_FEC_ENET    1   /* use FEC ethernet  */
 100 # define CONFIG_MII         1
 101 # define CONFIG_SYS_DISCOVER_PHY   1
 102 # define CONFIG_FEC_UTOPIA  1
 103 # define CONFIG_ETHADDR     08:00:06:26:A2:6D
 104 # define CONFIG_IPADDR      192.168.28.128
 105 # define CONFIG_SERVERIP    139.10.137.138
 106 # define CONFIG_SYS_DISCOVER_PHY   1
 107
 108 #define CONFIG_MAC_PARTITION
 109 #define CONFIG_DOS_PARTITION
 110
 111 /* enable I2C and select the hardware/software driver */
 112 #undef  CONFIG_HARD_I2C                 /* I2C with hardware support    */
 113 #define CONFIG_SOFT_I2C         1       /* I2C bit-banged               */
 114 # define CONFIG_SYS_I2C_SPEED           50000
 115 # define CONFIG_SYS_I2C_SLAVE           0xDD
 116 # define CONFIG_SYS_I2C_EEPROM_ADDR     0x50
 117 /*
 118  * Software (bit-bang) I2C driver configuration
 119  */
 120 #define PB_SCL          0x00000020      /* PB 26 */
 121 #define PB_SDA          0x00000010      /* PB 27 */
 122
 123 #define I2C_INIT        (immr->im_cpm.cp_pbdir |=  PB_SCL)
 124 #define I2C_ACTIVE      (immr->im_cpm.cp_pbdir |=  PB_SDA)
 125 #define I2C_TRISTATE    (immr->im_cpm.cp_pbdir &= ~PB_SDA)
 126 #define I2C_READ        ((immr->im_cpm.cp_pbdat & PB_SDA) != 0)
 127 #define I2C_SDA(bit)    if(bit) immr->im_cpm.cp_pbdat |=  PB_SDA; \
 128                         else    immr->im_cpm.cp_pbdat &= ~PB_SDA
 129 #define I2C_SCL(bit)    if(bit) immr->im_cpm.cp_pbdat |=  PB_SCL; \
 130                         else    immr->im_cpm.cp_pbdat &= ~PB_SCL
 131 #define I2C_DELAY       udelay(5)       /* 1/4 I2C clock duration */
 132
 133 #define CONFIG_RTC_MPC8xx               /* use internal RTC of MPC8xx   */
 134
 135
 136 /*
 137  * Command line configuration.
 138  */
 139 #include <config_cmd_default.h>
 140
 141 #define CONFIG_CMD_ASKENV
 142 #define CONFIG_CMD_DHCP
 143 #define CONFIG_CMD_DATE
 144
 145
 146 /*
 147  * Miscellaneous configurable options
 148  */
 149 #define CONFIG_SYS_LONGHELP                     /* undef to save memory         */
 150 #define CONFIG_SYS_PROMPT       "=> "           /* Monitor Command Prompt       */
 151 #if defined(CONFIG_CMD_KGDB)
 152 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size      */
 153 #else
 154 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size      */
 155 #endif
 156 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
 157 #define CONFIG_SYS_MAXARGS      16              /* max number of command args   */
 158 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size    */
 159
 160 #define CONFIG_SYS_MEMTEST_START        0x0100000       /* memtest works on     */
 161 #define CONFIG_SYS_MEMTEST_END          0x0400000       /* 1 ... 4 MB in DRAM   */
 162
 163 #define CONFIG_SYS_LOAD_ADDR            0x00100000
 164
 165 #define CONFIG_SYS_HZ           1000            /* decrementer freq: 1 ms ticks */
 166
 167 #define CONFIG_SYS_BAUDRATE_TABLE       { 9600, 19200, 38400, 57600, 115200 }
 168
 169 /*
 170  * Low Level Configuration Settings
 171  * (address mappings, register initial values, etc.)
 172  * You should know what you are doing if you make changes here.
 173  */
 174 /*-----------------------------------------------------------------------
 175  * Internal Memory Mapped Register
 176  */
 177 #define CONFIG_SYS_IMMR         0xFFF00000
 178 #define CONFIG_SYS_IMMR_SIZE            ((uint)(64 * 1024))
 179
 180 /*-----------------------------------------------------------------------
 181  * Definitions for initial stack pointer and data area (in DPRAM)
 182  */
 183 #define CONFIG_SYS_INIT_RAM_ADDR        CONFIG_SYS_IMMR
 184 #define CONFIG_SYS_INIT_RAM_END 0x2F00  /* End of used area in DPRAM    */
 185 #define CONFIG_SYS_GBL_DATA_SIZE        64  /* size in bytes reserved for initial data */
 186 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
 187 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 188
 189 /*-----------------------------------------------------------------------
 190  * Start addresses for the final memory configuration
 191  * (Set up by the startup code)
 192  * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
 193  */
 194 #define CONFIG_SYS_SDRAM_BASE           0x00000000
 195 #define CONFIG_SYS_FLASH_BASE           0x08000000
 196 #define CONFIG_SYS_FLASH_SIZE           ((uint)(4 * 1024 * 1024))       /* max 16Mbyte */
 197
 198 #define CONFIG_SYS_RESET_ADDRESS        0xFFF00100
 199
 200 #if defined(DEBUG)
 201 # define        CONFIG_SYS_MONITOR_LEN          (256 << 10)     /* Reserve 256 kB for Monitor   */
 202 #else
 203 # define        CONFIG_SYS_MONITOR_LEN          (192 << 10)     /* Reserve 192 kB for Monitor   */
 204 #endif
 205
 206 # define CONFIG_SYS_MONITOR_BASE        CONFIG_SYS_FLASH_BASE
 207 # define CONFIG_SYS_MALLOC_LEN          (128 << 10)     /* Reserve 128 kB for malloc()  */
 208
 209 /*
 210  * For booting Linux, the board info and command line data
 211  * have to be in the first 8 MB of memory, since this is
 212  * the maximum mapped by the Linux kernel during initialization.
 213  */
 214 #define CONFIG_SYS_BOOTMAPSZ            (8 << 20)       /* Initial Memory map for Linux */
 215 /*-----------------------------------------------------------------------
 216  * FLASH organization
 217  */
 218 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* max number of memory banks           */
 219 #define CONFIG_SYS_MAX_FLASH_SECT       67      /* max number of sectors on one chip    */
 220
 221 #define CONFIG_SYS_FLASH_ERASE_TOUT     120000  /* Timeout for Flash Erase (in ms)      */
 222 #define CONFIG_SYS_FLASH_WRITE_TOUT     500             /* Timeout for Flash Write (in ms)      */
 223
 224 #define CONFIG_ENV_IS_IN_FLASH  1
 225 #define CONFIG_ENV_OFFSET               0x8000
 226 #define CONFIG_ENV_SIZE         0x4000  /* Total Size of Environment Sector     */
 227
 228 /*-----------------------------------------------------------------------
 229  * Cache Configuration
 230  */
 231 #define CONFIG_SYS_CACHELINE_SIZE       16      /* For all MPC8xx CPUs                  */
 232 #if defined(CONFIG_CMD_KGDB)
 233 #define CONFIG_SYS_CACHELINE_SHIFT      4       /* log base 2 of the above value        */
 234 #endif
 235
 236 /*-----------------------------------------------------------------------
 237  * SYPCR - System Protection Control                                    11-9
 238  * SYPCR can only be written once after reset!
 239  *-----------------------------------------------------------------------
 240  * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
 241  */
 242 #if defined(CONFIG_WATCHDOG)
 243 #define CONFIG_SYS_SYPCR        (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
 244                          SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
 245 #else
 246 #define CONFIG_SYS_SYPCR        (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
 247 #endif
 248
 249 /*-----------------------------------------------------------------------
 250  * SIUMCR - SIU Module Configuration                                    11-6
 251  *-----------------------------------------------------------------------
 252  * PCMCIA config., multi-function pin tri-state
 253  */
 254 #define CONFIG_SYS_SIUMCR       (SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
 255
 256 /*-----------------------------------------------------------------------
 257  * TBSCR - Time Base Status and Control                                 11-26
 258  *-----------------------------------------------------------------------
 259  * Clear Reference Interrupt Status, Timebase freezing enabled
 260  */
 261 #define CONFIG_SYS_TBSCR        (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
 262
 263 /*-----------------------------------------------------------------------
 264  * PISCR - Periodic Interrupt Status and Control                11-31
 265  *-----------------------------------------------------------------------
 266  * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
 267  */
 268 #define CONFIG_SYS_PISCR        (PISCR_PS | PISCR_PITF)
 269
 270 /*-----------------------------------------------------------------------
 271  * PLPRCR - PLL, Low-Power, and Reset Control Register  15-30
 272  *-----------------------------------------------------------------------
 273  * set the PLL, the low-power modes and the reset control (15-29)
 274  */
 275 #define CONFIG_SYS_PLPRCR       (((MPC8XX_FACT-1) << PLPRCR_MF_SHIFT) | \
 276                                 PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
 277
 278 /*-----------------------------------------------------------------------
 279  * SCCR - System Clock and reset Control Register               15-27
 280  *-----------------------------------------------------------------------
 281  * Set clock output, timebase and RTC source and divider,
 282  * power management and some other internal clocks
 283  */
 284 #define SCCR_MASK       SCCR_EBDF11
 285
 286 #define CONFIG_SYS_SCCR (SCCR_TBS       | SCCR_COM00    | SCCR_DFSYNC00 | \
 287                          SCCR_DFBRG00   | SCCR_DFNL000  | SCCR_DFNH000  | \
 288                          SCCR_DFLCD000  |SCCR_DFALCD00  )
 289
 290 /*-----------------------------------------------------------------------
 291  * RCCR - RISC Controller Configuration Register                19-4
 292  *-----------------------------------------------------------------------
 293  */
 294 /* +0x09C4 => DRQP = 10 (IDMA requests have lowest priority) */
 295 #define CONFIG_SYS_RCCR 0x0020
 296
 297 /*-----------------------------------------------------------------------
 298  * PCMCIA stuff
 299  *-----------------------------------------------------------------------
 300  */
 301 #define PCMCIA_MEM_ADDR         ((uint)0xff020000)
 302 #define PCMCIA_MEM_SIZE         ((uint)(64 * 1024))
 303
 304 /*-----------------------------------------------------------------------
 305  *
 306  *-----------------------------------------------------------------------
 307  *
 308  */
 309 #define CONFIG_SYS_DER          0
 310
 311 /* Because of the way the 860 starts up and assigns CS0 the
 312 * entire address space, we have to set the memory controller
 313 * differently.  Normally, you write the option register
 314 * first, and then enable the chip select by writing the
 315 * base register.  For CS0, you must write the base register
 316 * first, followed by the option register.
 317 */
 318
 319 /*
 320  * Init Memory Controller:
 321  *
 322  * BR0 and OR0 (FLASH)
 323  */
 324
 325 #define FLASH_BASE0_PRELIM      CONFIG_SYS_FLASH_BASE   /* FLASH bank #0        */
 326
 327 /* used to re-map FLASH both when starting from SRAM or FLASH:
 328  * restrict access enough to keep SRAM working (if any)
 329  * but not too much to meddle with FLASH accesses
 330  */
 331 #define CONFIG_SYS_REMAP_OR_AM          0xF8000000      /* OR addr mask */
 332 #define CONFIG_SYS_PRELIM_OR_AM 0xF8000000      /* OR addr mask */
 333
 334 /* FLASH timing:
 335  TRLX = 0, CSNT = 1, SCY = 3, EHTR = 1  */
 336 #define CONFIG_SYS_OR_TIMING_FLASH      (OR_CSNT_SAM  | OR_BI | \
 337                                  OR_SCY_3_CLK | OR_EHTR)
 338
 339 #define CONFIG_SYS_OR0_PRELIM   (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
 340 #define CONFIG_SYS_BR0_PRELIM   ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V )
 341
 342 /*
 343  * BR2/3 and OR2/3 (SDRAM)
 344  *
 345  */
 346 #define SDRAM_BASE_PRELIM       0x00000000      /* SDRAM bank #0        */
 347 #define SDRAM_MAX_SIZE          0x04000000      /* max 64 MB per bank   */
 348
 349 /* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care)      */
 350
 351 #define CONFIG_SYS_OR2_PRELIM   (CONFIG_SYS_PRELIM_OR_AM | OR_CSNT_SAM  | OR_BI | OR_ACS_DIV4)
 352 #define CONFIG_SYS_BR2_PRELIM   ((SDRAM_BASE_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
 353 #define CONFIG_SYS_BR1_PRELIM   ((SDRAM_BASE1_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V)
 354
 355 /*
 356  * Memory Periodic Timer Prescaler
 357  */
 358
 359 /* periodic timer for refresh */
 360 #define CONFIG_SYS_MAMR_PTA     124             /* start with divider for 64 MHz        */
 361
 362 /* refresh rate 15.6 us (= 64 ms / 4K = 62.4 / quad bursts) for <= 128 MBit     */
 363 #define CONFIG_SYS_MPTPR                MPTPR_PTP_DIV32         /* setting for 1 bank   */
 364
 365 /*
 366  * MAMR settings for SDRAM
 367  */
 368
 369 #define CONFIG_SYS_MAMR ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE       |   \
 370                          MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 |   \
 371                          MAMR_RLFA_1X    | MAMR_WLFA_1X    | MAMR_TLFA_8X)
 372
 373
 374 /*
 375  * Internal Definitions
 376  *
 377  * Boot Flags
 378  */
 379 #define BOOTFLAG_COLD   0x01            /* Normal Power-On: Boot from FLASH     */
 380 #define BOOTFLAG_WARM   0x02            /* Software reboot                      */
 381
 382 #ifdef CONFIG_MPC860T
 383
 384 /* Interrupt level assignments.
 385 */
 386 #define FEC_INTERRUPT   SIU_LEVEL1      /* FEC interrupt */
 387
 388 #endif /* CONFIG_MPC860T */
 389
 390
 391 #endif  /* __CONFIG_H */