include/configs/ISPAN.h

   1 /*
   2  * Copyright (C) 2004 Arabella Software Ltd.
   3  * Yuli Barcohen <yuli@arabellasw.com>
   4  *
   5  * Support for Interphase iSPAN Communications Controllers
   6  * (453x and others). Tested on 4532.
   7  *
   8  * Derived from iSPAN 4539 port (iphase4539) by
   9  * Wolfgang Grandegger <wg@denx.de>
  10  *
  11  * See file CREDITS for list of people who contributed to this
  12  * project.
  13  *
  14  * This program is free software; you can redistribute it and/or
  15  * modify it under the terms of the GNU General Public License as
  16  * published by the Free Software Foundation; either version 2 of
  17  * the License, or (at your option) any later version.
  18  *
  19  * This program is distributed in the hope that it will be useful,
  20  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  21  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  22  * GNU General Public License for more details.
  23  *
  24  * You should have received a copy of the GNU General Public License
  25  * along with this program; if not, write to the Free Software
  26  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  27  * MA 02111-1307 USA
  28  */
  29 #ifndef __CONFIG_H
  30 #define __CONFIG_H
  31
  32 #define CONFIG_MPC8260                  /* This is an MPC8260 CPU               */
  33 #define CONFIG_ISPAN                    /* ...on one of Interphase iSPAN boards */
  34 #define CONFIG_CPM2             1       /* Has a CPM2 */
  35
  36 /*-----------------------------------------------------------------------
  37  * Select serial console configuration
  38  *
  39  * If either CONFIG_CONS_ON_SMC or CONFIG_CONS_ON_SCC is selected, then
  40  * CONFIG_CONS_INDEX must be set to the channel number (1-2 for SMC, 1-4
  41  * for SCC).
  42  *
  43  * If CONFIG_CONS_NONE is defined, then the serial console routines must be
  44  * defined elsewhere (for example, on the cogent platform, there are serial
  45  * ports on the motherboard which are used for the serial console - see
  46  * cogent/cma101/serial.[ch]).
  47  */
  48 #define CONFIG_CONS_ON_SMC              /* Define if console on SMC             */
  49 #undef  CONFIG_CONS_ON_SCC              /* Define if console on SCC             */
  50 #undef  CONFIG_CONS_NONE                /* Define if console on something else  */
  51 #define CONFIG_CONS_INDEX       1       /* Which serial channel for console     */
  52
  53 /*-----------------------------------------------------------------------
  54  * Select Ethernet configuration
  55  *
  56  * If either CONFIG_ETHER_ON_SCC or CONFIG_ETHER_ON_FCC is selected, then
  57  * CONFIG_ETHER_INDEX must be set to the channel number (1-4 for SCC, 1-3
  58  * for FCC).
  59  *
  60  * If CONFIG_ETHER_NONE is defined, then either the Ethernet routines must
  61  * be defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset.
  62  */
  63 #undef  CONFIG_ETHER_ON_SCC             /* Define if Ethernet on SCC            */
  64 #define CONFIG_ETHER_ON_FCC             /* Define if Ethernet on FCC            */
  65 #undef  CONFIG_ETHER_NONE               /* Define if Ethernet on something else */
  66 #define CONFIG_ETHER_INDEX      3       /* Which channel for Ethernrt           */
  67
  68 #ifdef CONFIG_ETHER_ON_FCC
  69
  70 #if CONFIG_ETHER_INDEX == 3
  71
  72 #define CONFIG_SYS_PHY_ADDR             0
  73 #define CONFIG_SYS_CMXFCR_VALUE (CMXFCR_RF3CS_CLK14 | CMXFCR_TF3CS_CLK16)
  74 #define CONFIG_SYS_CMXFCR_MASK          (CMXFCR_FC3 | CMXFCR_RF3CS_MSK | CMXFCR_TF3CS_MSK)
  75
  76 #endif /* CONFIG_ETHER_INDEX == 3 */
  77
  78 #define CONFIG_SYS_CPMFCR_RAMTYPE       0
  79 #define CONFIG_SYS_FCC_PSMR             (FCC_PSMR_FDE | FCC_PSMR_LPB)
  80
  81 #define CONFIG_MII                              /* MII PHY management           */
  82 #define CONFIG_BITBANGMII                       /* Bit-bang MII PHY management  */
  83 /*
  84  * GPIO pins used for bit-banged MII communications
  85  */
  86 #define MDIO_PORT               3               /* Port D */
  87 #define MDIO_DECLARE            volatile ioport_t *iop = ioport_addr ( \
  88                                         (immap_t *) CONFIG_SYS_IMMR, MDIO_PORT )
  89 #define MDC_DECLARE             MDIO_DECLARE
  90
  91
  92 #define CONFIG_SYS_MDIO_PIN             0x00040000      /* PD13 */
  93 #define CONFIG_SYS_MDC_PIN              0x00080000      /* PD12 */
  94
  95 #define MDIO_ACTIVE             (iop->pdir |=  CONFIG_SYS_MDIO_PIN)
  96 #define MDIO_TRISTATE           (iop->pdir &= ~CONFIG_SYS_MDIO_PIN)
  97 #define MDIO_READ               ((iop->pdat &  CONFIG_SYS_MDIO_PIN) != 0)
  98
  99 #define MDIO(bit)               if(bit) iop->pdat |=  CONFIG_SYS_MDIO_PIN; \
 100                                 else    iop->pdat &= ~CONFIG_SYS_MDIO_PIN
 101
 102 #define MDC(bit)                if(bit) iop->pdat |=  CONFIG_SYS_MDC_PIN; \
 103                                 else    iop->pdat &= ~CONFIG_SYS_MDC_PIN
 104
 105 #define MIIDELAY                udelay(1)
 106
 107 #endif /* CONFIG_ETHER_ON_FCC */
 108
 109 #define CONFIG_8260_CLKIN       65536000        /* in Hz */
 110 #define CONFIG_BAUDRATE         38400
 111
 112
 113 /*
 114  * BOOTP options
 115  */
 116 #define CONFIG_BOOTP_BOOTFILESIZE
 117 #define CONFIG_BOOTP_BOOTPATH
 118 #define CONFIG_BOOTP_GATEWAY
 119 #define CONFIG_BOOTP_HOSTNAME
 120
 121
 122 /*
 123  * Command line configuration.
 124  */
 125 #include <config_cmd_default.h>
 126
 127 #define CONFIG_CMD_ASKENV
 128 #define CONFIG_CMD_DHCP
 129 #define CONFIG_CMD_IMMAP
 130 #define CONFIG_CMD_MII
 131 #define CONFIG_CMD_PING
 132 #define CONFIG_CMD_REGINFO
 133
 134
 135 #define CONFIG_BOOTDELAY        5               /* autoboot after 5 seconds     */
 136 #define CONFIG_BOOTCOMMAND      "bootm fe010000"        /* autoboot command     */
 137 #define CONFIG_BOOTARGS         "root=/dev/ram rw"
 138
 139 #define CONFIG_BZIP2            /* Include support for bzip2 compressed images  */
 140 #undef  CONFIG_WATCHDOG         /* Disable platform specific watchdog           */
 141
 142 /*-----------------------------------------------------------------------
 143  * Miscellaneous configurable options
 144  */
 145 #define CONFIG_SYS_PROMPT               "=> "           /* Monitor Command Prompt       */
 146 #define CONFIG_SYS_HUSH_PARSER
 147 #define CONFIG_SYS_PROMPT_HUSH_PS2      "> "
 148 #define CONFIG_SYS_LONGHELP                             /* #undef to save memory        */
 149 #define CONFIG_SYS_CBSIZE               256             /* Console I/O Buffer Size      */
 150 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)  /* Print Buffer Size */
 151 #define CONFIG_SYS_MAXARGS              16              /* Max number of command args   */
 152 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size    */
 153
 154 #define CONFIG_SYS_MEMTEST_START        0x00100000      /* memtest works on             */
 155 #define CONFIG_SYS_MEMTEST_END          0x03B00000      /* 1 ... 59 MB in SDRAM         */
 156
 157 #define CONFIG_SYS_LOAD_ADDR            0x100000        /* Default load address         */
 158
 159 #define CONFIG_SYS_HZ                   1000            /* Decrementer freq: 1 ms ticks */
 160
 161 #define CONFIG_SYS_BAUDRATE_TABLE       { 9600, 19200, 38400, 57600, 115200 }
 162
 163 #define CONFIG_SYS_RESET_ADDRESS        0x09900000
 164
 165 #define CONFIG_MISC_INIT_R                      /* We need misc_init_r()        */
 166
 167 /*-----------------------------------------------------------------------
 168  * For booting Linux, the board info and command line data
 169  * have to be in the first 8 MB of memory, since this is
 170  * the maximum mapped by the Linux kernel during initialization.
 171  */
 172 #define CONFIG_SYS_BOOTMAPSZ            (8 << 20)       /* Initial Memory map for Linux */
 173
 174 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
 175 #define CONFIG_SYS_MONITOR_LEN          (192 << 10)     /* Reserve 192 kB for Monitor   */
 176 #ifdef CONFIG_BZIP2
 177 #define CONFIG_SYS_MALLOC_LEN           (4096 << 10)    /* Reserve 4 MB for malloc()    */
 178 #else
 179 #define CONFIG_SYS_MALLOC_LEN           (128 << 10)     /* Reserve 128 KB for malloc()  */
 180 #endif /* CONFIG_BZIP2 */
 181
 182 /*-----------------------------------------------------------------------
 183  * FLASH organization
 184  */
 185 #define CONFIG_SYS_FLASH_BASE           0xFE000000
 186 #define CONFIG_SYS_FLASH_CFI                            /* The flash is CFI compatible  */
 187 #define CONFIG_FLASH_CFI_DRIVER                 /* Use common CFI driver        */
 188 #define CONFIG_SYS_MAX_FLASH_BANKS      1               /* Max num of memory banks      */
 189 #define CONFIG_SYS_MAX_FLASH_SECT       142             /* Max num of sects on one chip */
 190
 191 /* Environment is in flash, there is little space left in Serial EEPROM */
 192 #define CONFIG_ENV_IS_IN_FLASH
 193 #define CONFIG_ENV_SECT_SIZE    0x10000         /* We use one complete sector   */
 194 #define CONFIG_ENV_SIZE         (CONFIG_ENV_SECT_SIZE)
 195 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
 196 #define CONFIG_ENV_ADDR_REDUND  (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
 197 #define CONFIG_ENV_SIZE_REDUND  (CONFIG_ENV_SIZE)
 198
 199 /*-----------------------------------------------------------------------
 200  * Hard Reset Configuration Words
 201  *
 202  * If you change bits in the HRCW, you must also change the CONFIG_SYS_*
 203  * defines for the various registers affected by the HRCW e.g. changing
 204  * HRCW_DPPCxx requires you to also change CONFIG_SYS_SIUMCR.
 205  */
 206 /* 0x1686B245 */
 207 #define CONFIG_SYS_HRCW_MASTER (HRCW_EBM      | HRCW_BPS01       | HRCW_CIP    |\
 208                          HRCW_L2CPC10  | HRCW_ISB110                    |\
 209                          HRCW_BMS      | HRCW_MMR11       | HRCW_APPC10 |\
 210                          HRCW_CS10PC01 | HRCW_MODCK_H0101                \
 211                         )
 212 /* No slaves */
 213 #define CONFIG_SYS_HRCW_SLAVE1 0
 214 #define CONFIG_SYS_HRCW_SLAVE2 0
 215 #define CONFIG_SYS_HRCW_SLAVE3 0
 216 #define CONFIG_SYS_HRCW_SLAVE4 0
 217 #define CONFIG_SYS_HRCW_SLAVE5 0
 218 #define CONFIG_SYS_HRCW_SLAVE6 0
 219 #define CONFIG_SYS_HRCW_SLAVE7 0
 220
 221 /*-----------------------------------------------------------------------
 222  * Internal Memory Mapped Register
 223  */
 224 #define CONFIG_SYS_IMMR         0xF0F00000
 225 #ifdef CONFIG_SYS_REV_B
 226 #define CONFIG_SYS_DEFAULT_IMMR 0xFF000000
 227 #endif /* CONFIG_SYS_REV_B */
 228 /*-----------------------------------------------------------------------
 229  * Definitions for initial stack pointer and data area (in DPRAM)
 230  */
 231 #define CONFIG_SYS_INIT_RAM_ADDR        CONFIG_SYS_IMMR
 232 #define CONFIG_SYS_INIT_RAM_END 0x4000          /* End of used area in DPRAM    */
 233 #define CONFIG_SYS_GBL_DATA_SIZE        128  /* Size in bytes reserved for initial data */
 234 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
 235 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 236
 237 /*-----------------------------------------------------------------------
 238  * Internal Definitions
 239  *
 240  * Boot Flags
 241  */
 242 #define BOOTFLAG_COLD           0x01    /* Normal Power-On: Boot from flash     */
 243 #define BOOTFLAG_WARM           0x02    /* Software reboot                      */
 244
 245 /*-----------------------------------------------------------------------
 246  * Cache Configuration
 247  */
 248 #define CONFIG_SYS_CACHELINE_SIZE       32      /* For MPC8260 CPU                      */
 249
 250 /*-----------------------------------------------------------------------
 251  * HIDx - Hardware Implementation-dependent Registers           2-11
 252  *-----------------------------------------------------------------------
 253  * HID0 also contains cache control.
 254  *
 255  * HID1 has only read-only information - nothing to set.
 256  */
 257 #define CONFIG_SYS_HID0_INIT            (HID0_ICE|HID0_DCE|HID0_ICFI|HID0_DCI|\
 258                                 HID0_IFEM|HID0_ABE)
 259 #define CONFIG_SYS_HID0_FINAL           (HID0_ICE|HID0_IFEM|HID0_ABE)
 260 #define CONFIG_SYS_HID2         0
 261
 262 /*-----------------------------------------------------------------------
 263  * RMR - Reset Mode Register                                     5-5
 264  *-----------------------------------------------------------------------
 265  * turn on Checkstop Reset Enable
 266  */
 267 #define CONFIG_SYS_RMR                  RMR_CSRE
 268
 269 /*-----------------------------------------------------------------------
 270  * BCR - Bus Configuration                                       4-25
 271  *-----------------------------------------------------------------------
 272  */
 273 #define CONFIG_SYS_BCR                  0xA01C0000
 274
 275 /*-----------------------------------------------------------------------
 276  * SIUMCR - SIU Module Configuration                             4-31
 277  *-----------------------------------------------------------------------
 278  */
 279 #define CONFIG_SYS_SIUMCR               0x42250000/* 0x4205C000 */
 280
 281 /*-----------------------------------------------------------------------
 282  * SYPCR - System Protection Control                             4-35
 283  * SYPCR can only be written once after reset!
 284  *-----------------------------------------------------------------------
 285  * Watchdog & Bus Monitor Timer max, 60x Bus Monitor enable
 286  */
 287 #if defined (CONFIG_WATCHDOG)
 288 #define CONFIG_SYS_SYPCR                (SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\
 289                                 SYPCR_SWRI|SYPCR_SWP|SYPCR_SWE)
 290 #else
 291 #define CONFIG_SYS_SYPCR                (SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\
 292                                 SYPCR_SWRI|SYPCR_SWP)
 293 #endif /* CONFIG_WATCHDOG */
 294
 295 /*-----------------------------------------------------------------------
 296  * TMCNTSC - Time Counter Status and Control                     4-40
 297  * Clear once per Second and Alarm Interrupt Status, Set 32KHz timersclk,
 298  * and enable Time Counter
 299  *-----------------------------------------------------------------------
 300  */
 301 #define CONFIG_SYS_TMCNTSC              (TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE)
 302
 303 /*-----------------------------------------------------------------------
 304  * PISCR - Periodic Interrupt Status and Control                 4-42
 305  *-----------------------------------------------------------------------
 306  * Clear Periodic Interrupt Status, Set 32KHz timersclk, and enable
 307  * Periodic timer
 308  */
 309 #define CONFIG_SYS_PISCR                (PISCR_PS|PISCR_PTF|PISCR_PTE)
 310
 311 /*-----------------------------------------------------------------------
 312  * SCCR - System Clock Control                                   9-8
 313  *-----------------------------------------------------------------------
 314  * Ensure DFBRG is Divide by 16
 315  */
 316 #define CONFIG_SYS_SCCR         SCCR_DFBRG01
 317
 318 /*-----------------------------------------------------------------------
 319  * RCCR - RISC Controller Configuration                         13-7
 320  *-----------------------------------------------------------------------
 321  */
 322 #define CONFIG_SYS_RCCR         0
 323
 324 /*-----------------------------------------------------------------------
 325  * Init Memory Controller:
 326  *
 327  * Bank Bus     Machine PortSize                        Device
 328  * ---- ---     ------- -----------------------------   ------
 329  *  0   60x     GPCM     8 bit (Rev.B)/16 bit (Rev.D)   Flash
 330  *  1   60x     SDRAM   64 bit                          SDRAM
 331  *  2   Local   SDRAM   32 bit                          SDRAM
 332  */
 333 #define CONFIG_SYS_USE_FIRMWARE /* If defined - do not initialise memory
 334                                    controller, rely on initialisation
 335                                    performed by the Interphase boot firmware.
 336                                  */
 337
 338 #define CONFIG_SYS_OR0_PRELIM           0xFE000882
 339 #ifdef CONFIG_SYS_REV_B
 340 #define CONFIG_SYS_BR0_PRELIM           (CONFIG_SYS_FLASH_BASE | BRx_PS_8  | BRx_V)
 341 #else  /* Rev. D */
 342 #define CONFIG_SYS_BR0_PRELIM           (CONFIG_SYS_FLASH_BASE | BRx_PS_16 | BRx_V)
 343 #endif /* CONFIG_SYS_REV_B */
 344
 345 #define CONFIG_SYS_MPTPR                0x7F00
 346
 347 /* Please note that 60x SDRAM MUST start at 0 */
 348 #define CONFIG_SYS_SDRAM_BASE           0x00000000
 349 #define CONFIG_SYS_60x_BR               0x00000041
 350 #define CONFIG_SYS_60x_OR               0xF0002CD0
 351 #define CONFIG_SYS_PSDMR                0x0049929A
 352 #define CONFIG_SYS_PSRT         0x07
 353
 354 #define CONFIG_SYS_LSDRAM_BASE          0xF7000000
 355 #define CONFIG_SYS_LOC_BR               0x00001861
 356 #define CONFIG_SYS_LOC_OR               0xFF803280
 357 #define CONFIG_SYS_LSDMR                0x8285A552
 358 #define CONFIG_SYS_LSRT         0x07
 359
 360 #endif /* __CONFIG_H */